Jcb 67 c 1 mini excavator service repair manual (sn from 1912903 to 1913903)fusefjjskekemm
This service manual provides instructions for servicing an excavator engine. It contains sections on general information, components, operation, maintenance, removal and installation procedures for the rocker and fittings assembly. The summary focuses on the rocker and fittings section, which describes the components of the rocker assembly such as the rocker arms, shaft and springs. It provides details on how the assembly works, lubrication paths, and maintenance checks. Procedures for removing, installing, disassembling and assembling the rocker assembly are included.
Jcb js300 excavator service repair manual sn from 2491541 onwardsdfujsjjekme
This service manual provides instructions for servicing excavators models JS300, JS330, and JS370. It contains sections covering the entire machine including the engine, fuel and exhaust systems, cooling system, driveline, hydraulic system, electrical system, and various components. The manual provides introductions, component identifications, removal and installation instructions, and other service procedures to properly maintain and repair the excavators.
Jcb tm220 telescopic wheeled loader service repair manual sn from 2679851 to ...fujsjefjwerkskemm
This service manual provides instructions for servicing the rocker and fittings on the TM180 and TM220 loader engines. The document describes how to remove and install the rocker assembly, disassemble and assemble the rocker arms, and remove and install the rocker cover. Technical specifications are also provided for rocker shaft dimensions, tappet clearances, and tappet dimensions. The operation of the hydraulic tappets is explained, along with difficult operating conditions that could cause play.
Yale (j813) glp45 svx5 lift truck service repair manualfjjsjeskkekem
This document provides specifications for GLP/GDP40-55VX lift truck models including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Fuel tank capacities of 79-100.3 liters for various engine options
- Transmission oil specifications and relief pressures for 1-speed and 2-speed transmissions
- Hydraulic system relief pressures for primary and secondary circuits
- Steering relief pressure specifications
- Stall speed ranges for various engine and transmission combinations
Yale (f807) erp040 th lift truck service repair manualfjjsjeskkekem
This document provides a summary of the service manual contents for an ERP030-040TH lift truck. It lists the major system sections covered in the manual, including the frame, motors, transaxle, steering, brakes, hydraulics, controls, mast, and general information. For each section, it provides the part number, section number, reference manual number, and revision date. The document then provides an overview of the frame components and covers/plates that give access to internal systems during service.
Yale (e878) gp155 vx lift truck service repair manualfjjsjeskkekem
This document provides instructions for removing the operator cab from various lift truck models. The steps include tilting the steering column, sliding the seat forward, opening doors and windows, disconnecting battery cables, removing radiator caps, disconnecting air and heater hoses, extracting refrigerant from air conditioning systems, removing door assemblies, and disconnecting electrical connections. Removing the cab is a multi-step process that requires disconnecting various cab components from the engine, frame, and other systems.
Yale (e876) gdp210 dc lift truck service repair manualfjjsjeskkekem
The document provides instructions for raising and lowering the operator cab on a lift truck, as well as removing and installing the cab door. Key steps include:
1. Using the cab tilt hand pump or electric pump to raise or lower the cab until it locks in position.
2. Pulling the tilt latch release to fully raise or lower the cab.
3. Attaching lift straps and cushions to safely remove the cab door from its hinges and place it on the ground.
4. Reinstalling the cab door by lifting it back into position on the hinges and adjusting if needed.
Jcb 67 c 1 mini excavator service repair manual (sn from 1912903 to 1913903)fusefjjskekemm
This service manual provides instructions for servicing an excavator engine. It contains sections on general information, components, operation, maintenance, removal and installation procedures for the rocker and fittings assembly. The summary focuses on the rocker and fittings section, which describes the components of the rocker assembly such as the rocker arms, shaft and springs. It provides details on how the assembly works, lubrication paths, and maintenance checks. Procedures for removing, installing, disassembling and assembling the rocker assembly are included.
Jcb js300 excavator service repair manual sn from 2491541 onwardsdfujsjjekme
This service manual provides instructions for servicing excavators models JS300, JS330, and JS370. It contains sections covering the entire machine including the engine, fuel and exhaust systems, cooling system, driveline, hydraulic system, electrical system, and various components. The manual provides introductions, component identifications, removal and installation instructions, and other service procedures to properly maintain and repair the excavators.
Jcb tm220 telescopic wheeled loader service repair manual sn from 2679851 to ...fujsjefjwerkskemm
This service manual provides instructions for servicing the rocker and fittings on the TM180 and TM220 loader engines. The document describes how to remove and install the rocker assembly, disassemble and assemble the rocker arms, and remove and install the rocker cover. Technical specifications are also provided for rocker shaft dimensions, tappet clearances, and tappet dimensions. The operation of the hydraulic tappets is explained, along with difficult operating conditions that could cause play.
Yale (j813) glp45 svx5 lift truck service repair manualfjjsjeskkekem
This document provides specifications for GLP/GDP40-55VX lift truck models including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Fuel tank capacities of 79-100.3 liters for various engine options
- Transmission oil specifications and relief pressures for 1-speed and 2-speed transmissions
- Hydraulic system relief pressures for primary and secondary circuits
- Steering relief pressure specifications
- Stall speed ranges for various engine and transmission combinations
Yale (f807) erp040 th lift truck service repair manualfjjsjeskkekem
This document provides a summary of the service manual contents for an ERP030-040TH lift truck. It lists the major system sections covered in the manual, including the frame, motors, transaxle, steering, brakes, hydraulics, controls, mast, and general information. For each section, it provides the part number, section number, reference manual number, and revision date. The document then provides an overview of the frame components and covers/plates that give access to internal systems during service.
Yale (e878) gp155 vx lift truck service repair manualfjjsjeskkekem
This document provides instructions for removing the operator cab from various lift truck models. The steps include tilting the steering column, sliding the seat forward, opening doors and windows, disconnecting battery cables, removing radiator caps, disconnecting air and heater hoses, extracting refrigerant from air conditioning systems, removing door assemblies, and disconnecting electrical connections. Removing the cab is a multi-step process that requires disconnecting various cab components from the engine, frame, and other systems.
Yale (e876) gdp210 dc lift truck service repair manualfjjsjeskkekem
The document provides instructions for raising and lowering the operator cab on a lift truck, as well as removing and installing the cab door. Key steps include:
1. Using the cab tilt hand pump or electric pump to raise or lower the cab until it locks in position.
2. Pulling the tilt latch release to fully raise or lower the cab.
3. Attaching lift straps and cushions to safely remove the cab door from its hinges and place it on the ground.
4. Reinstalling the cab door by lifting it back into position on the hinges and adjusting if needed.
Toyota 30 7 fbcu45 forklift service repair manualfjjsjeskkekem
This manual provides specifications, maintenance, repair, diagnostic and service procedures for Toyota electric powered forklifts models 7FBCU15 to 7FBCU55 from July 2001. It covers the chassis, body, electrical controls, and material handling system of these forklift models. The manual is organized by section with topics including general information, battery, multi-display functions, troubleshooting, motor, drive unit, front axle, rear axle, steering, brake, body, and material handling system.
Perkins peregrine edi and 1300 series edi wk diesel engine service repair manualfjjsjeskkekem
This document is a workshop manual for Perkins Peregrine EDi and 1300 Series EDi diesel engines. It provides information on engine components, specifications, maintenance procedures, and fault diagnosis. The manual contains chapters covering the cylinder head assembly, piston and connecting rod assemblies, crankshaft assembly, timing case and drive assembly, cylinder block assembly, engine timing, turbocharger, lubrication system, fuel system, cooling system, flywheel and housing, electrical equipment, auxiliary equipment, and special tools. Each chapter provides detailed descriptions and step-by-step instructions for removing, inspecting, and installing engine components and performing maintenance and repair work.
New holland we190 wheel loader service repair manualfjjsjeskkekem
This service manual provides information on wheeled excavators including the WE190, WE210, WE230, WE210 Industrial, and WE230 Industrial models. It covers technical specifications, maintenance procedures, and troubleshooting for the upper structure, undercarriage, front attachment, hydraulic and electrical systems. The manual contains diagrams and specifications for components such as the boom, undercarriage, hydraulic pumps and valves, electrical systems, and electronics.
New holland l220 skid steer loader service repair manualfjjsjeskkekem
This document is a service manual for New Holland 200 Series Skid Steer Loaders and Compact Track Loaders. It provides information on the hydraulic, pneumatic, electrical, electronic and other systems of these machines. The manual is divided into sections covering topics such as the primary and secondary hydraulic systems, electrical power system, engine components, transmission, axles, brakes, steering, frame, safety features and more. Torque specifications are provided for metric hardware.
New holland b110 btc backhoe loader service repair manualfjjsjeskkekem
This document contains service manuals for various backhoe loader models. It includes sections on safety, maintenance, technical specifications, troubleshooting, and repair procedures for components like the transmission, axles, brakes, hydraulic system, and more. The document provides detailed information on maintaining and repairing the different systems of backhoe loaders.
Liebherr rl 22 b rl22b pipe layer service repair manualfjjsjeskkekem
This document provides guidelines for performing tests, adjustments, and repairs on LIEBHERR earthmoving equipment. It states that only qualified personnel should perform work, and all applicable safety laws and regulations must be followed. The guidelines are intended to help ensure work can be done safely without endangering operators or third parties.
Kubota stv32 tractor service repair manualfjjsjeskkekem
This document provides specifications and information for the STV32, STV36, and STV40 tractors. It includes details on the engine, transmission, dimensions, tires, PTO system, hydraulic system, three point hitch, battery, and other components. Maintenance instructions are also provided, outlining various check points to perform every 50 hours, 100 hours, and other intervals. Handling precautions are listed for electrical parts, wiring, batteries, fuses, and connectors to ensure safety when working on the tractors.
Kubota l175 tractor service repair manualfjjsjeskkekem
This shop manual provides service and repair information for Kubota L175, L210, L225, L225DT, and L260 tractor models. The manual includes an index listing components by model and section. Sections cover systems like brakes, clutch, engine, transmission, differential, hydraulics, and electrical. Specifications, tune-up procedures, sizes, clearances and capacities are also included in condensed tables.
Liebherr r964 c 1009 hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1008 hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 448 hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r960 demolition 1465 hydraulic excavator service repair manualfjjsjeskkekem
This document is a service manual that covers maintenance and repair for various systems of an industrial machine. It includes sections on technical data, maintenance procedures, drive systems, cooling systems, hydraulics, electrical systems, gearboxes, and other components. The manual provides instructions and specifications to service the machine.
Liebherr r906 1449 classic hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual for Liebherr hydraulic excavators. It contains 18 sections that provide technical data, design descriptions, and service/setup instructions for the machines. The manual is intended to assist customer support but does not replace proper training. It includes symbols to identify dangers, requirements, and expected results. The sections cover general information, tools, technical specifications, the engine/motor, couplings, hydraulic and electrical systems, swing/travel components, and options like the cab.
Liebherr lh110 m 1227 (tier4f) hydraulic excavator service repair manualfjjsjeskkekem
The document is a technical manual that discusses the mounting of standard and fine thread clamping nuts, and mounting clamping nuts on suspensions with swing brakes. It includes figures showing the components of differential cylinders and shock absorbers, and tables listing recommended corrosion inhibitors and base coats and paints from Liebherr. The manual instructs the reader to click on a link to access the complete manual.
Liebherr lh110 c 1228 (tier4f) hydraulic excavator service repair manualfjjsjeskkekem
The document is a technical manual that includes diagrams and descriptions of mounting different types of clamping nuts, components of hydraulic cylinders and shock absorbers, tables with corrosion inhibitor recommendations and paint options. It discusses mounting standard and fine thread clamping nuts, components of differential cylinders and shock absorbers that are at risk for corrosion, and provides corrosion protection product information from Liebherr. The manual encourages the reader to download a complete PDF version for more details.
Liebherr lh60 m timber hydraulic excavator service repair manualfjjsjeskkekem
This document provides safety warnings and instructions for operating a hydraulic excavator. It outlines hazards associated with the machine and stresses the importance of following safety precautions to prevent injury. Specific dangers are indicated by warning signs on the machine. The document also defines the designated use of the excavator as loosening, picking up, transporting, and dumping materials while following technical safety guidelines. Any other uses are considered not in accordance with proper operation of the machine.
Liebherr lh35 1201 hydraulic excavator service repair manualfjjsjeskkekem
The document is a technical manual that was printed on December 25, 2019 at 21:58. It contains instructions and diagrams for mounting different clamping nuts, adjusting swing brakes, and identifying components of hydraulic cylinders and shock absorbers that are at risk for corrosion. It also includes tables listing recommended corrosion inhibitors and paints from Liebherr for protecting hydraulic cylinder components from corrosion.
Liebherr lh30 1210 hydraulic excavator service repair manualfjjsjeskkekem
The document is a technical manual that was printed on December 25, 2019 at 21:58. It contains instructions and diagrams for mounting different clamping nuts, adjusting swing brakes, and identifying components of hydraulic cylinders and shock absorbers that are at risk for corrosion. It also includes tables listing recommended corrosion inhibitors and paints from Liebherr for protecting hydraulic cylinder components from corrosion.
Liebherr er 902 hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
Toyota 30 7 fbcu45 forklift service repair manualfjjsjeskkekem
This manual provides specifications, maintenance, repair, diagnostic and service procedures for Toyota electric powered forklifts models 7FBCU15 to 7FBCU55 from July 2001. It covers the chassis, body, electrical controls, and material handling system of these forklift models. The manual is organized by section with topics including general information, battery, multi-display functions, troubleshooting, motor, drive unit, front axle, rear axle, steering, brake, body, and material handling system.
Perkins peregrine edi and 1300 series edi wk diesel engine service repair manualfjjsjeskkekem
This document is a workshop manual for Perkins Peregrine EDi and 1300 Series EDi diesel engines. It provides information on engine components, specifications, maintenance procedures, and fault diagnosis. The manual contains chapters covering the cylinder head assembly, piston and connecting rod assemblies, crankshaft assembly, timing case and drive assembly, cylinder block assembly, engine timing, turbocharger, lubrication system, fuel system, cooling system, flywheel and housing, electrical equipment, auxiliary equipment, and special tools. Each chapter provides detailed descriptions and step-by-step instructions for removing, inspecting, and installing engine components and performing maintenance and repair work.
New holland we190 wheel loader service repair manualfjjsjeskkekem
This service manual provides information on wheeled excavators including the WE190, WE210, WE230, WE210 Industrial, and WE230 Industrial models. It covers technical specifications, maintenance procedures, and troubleshooting for the upper structure, undercarriage, front attachment, hydraulic and electrical systems. The manual contains diagrams and specifications for components such as the boom, undercarriage, hydraulic pumps and valves, electrical systems, and electronics.
New holland l220 skid steer loader service repair manualfjjsjeskkekem
This document is a service manual for New Holland 200 Series Skid Steer Loaders and Compact Track Loaders. It provides information on the hydraulic, pneumatic, electrical, electronic and other systems of these machines. The manual is divided into sections covering topics such as the primary and secondary hydraulic systems, electrical power system, engine components, transmission, axles, brakes, steering, frame, safety features and more. Torque specifications are provided for metric hardware.
New holland b110 btc backhoe loader service repair manualfjjsjeskkekem
This document contains service manuals for various backhoe loader models. It includes sections on safety, maintenance, technical specifications, troubleshooting, and repair procedures for components like the transmission, axles, brakes, hydraulic system, and more. The document provides detailed information on maintaining and repairing the different systems of backhoe loaders.
Liebherr rl 22 b rl22b pipe layer service repair manualfjjsjeskkekem
This document provides guidelines for performing tests, adjustments, and repairs on LIEBHERR earthmoving equipment. It states that only qualified personnel should perform work, and all applicable safety laws and regulations must be followed. The guidelines are intended to help ensure work can be done safely without endangering operators or third parties.
Kubota stv32 tractor service repair manualfjjsjeskkekem
This document provides specifications and information for the STV32, STV36, and STV40 tractors. It includes details on the engine, transmission, dimensions, tires, PTO system, hydraulic system, three point hitch, battery, and other components. Maintenance instructions are also provided, outlining various check points to perform every 50 hours, 100 hours, and other intervals. Handling precautions are listed for electrical parts, wiring, batteries, fuses, and connectors to ensure safety when working on the tractors.
Kubota l175 tractor service repair manualfjjsjeskkekem
This shop manual provides service and repair information for Kubota L175, L210, L225, L225DT, and L260 tractor models. The manual includes an index listing components by model and section. Sections cover systems like brakes, clutch, engine, transmission, differential, hydraulics, and electrical. Specifications, tune-up procedures, sizes, clearances and capacities are also included in condensed tables.
Liebherr r964 c 1009 hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1008 hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 448 hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r960 demolition 1465 hydraulic excavator service repair manualfjjsjeskkekem
This document is a service manual that covers maintenance and repair for various systems of an industrial machine. It includes sections on technical data, maintenance procedures, drive systems, cooling systems, hydraulics, electrical systems, gearboxes, and other components. The manual provides instructions and specifications to service the machine.
Liebherr r906 1449 classic hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual for Liebherr hydraulic excavators. It contains 18 sections that provide technical data, design descriptions, and service/setup instructions for the machines. The manual is intended to assist customer support but does not replace proper training. It includes symbols to identify dangers, requirements, and expected results. The sections cover general information, tools, technical specifications, the engine/motor, couplings, hydraulic and electrical systems, swing/travel components, and options like the cab.
Liebherr lh110 m 1227 (tier4f) hydraulic excavator service repair manualfjjsjeskkekem
The document is a technical manual that discusses the mounting of standard and fine thread clamping nuts, and mounting clamping nuts on suspensions with swing brakes. It includes figures showing the components of differential cylinders and shock absorbers, and tables listing recommended corrosion inhibitors and base coats and paints from Liebherr. The manual instructs the reader to click on a link to access the complete manual.
Liebherr lh110 c 1228 (tier4f) hydraulic excavator service repair manualfjjsjeskkekem
The document is a technical manual that includes diagrams and descriptions of mounting different types of clamping nuts, components of hydraulic cylinders and shock absorbers, tables with corrosion inhibitor recommendations and paint options. It discusses mounting standard and fine thread clamping nuts, components of differential cylinders and shock absorbers that are at risk for corrosion, and provides corrosion protection product information from Liebherr. The manual encourages the reader to download a complete PDF version for more details.
Liebherr lh60 m timber hydraulic excavator service repair manualfjjsjeskkekem
This document provides safety warnings and instructions for operating a hydraulic excavator. It outlines hazards associated with the machine and stresses the importance of following safety precautions to prevent injury. Specific dangers are indicated by warning signs on the machine. The document also defines the designated use of the excavator as loosening, picking up, transporting, and dumping materials while following technical safety guidelines. Any other uses are considered not in accordance with proper operation of the machine.
Liebherr lh35 1201 hydraulic excavator service repair manualfjjsjeskkekem
The document is a technical manual that was printed on December 25, 2019 at 21:58. It contains instructions and diagrams for mounting different clamping nuts, adjusting swing brakes, and identifying components of hydraulic cylinders and shock absorbers that are at risk for corrosion. It also includes tables listing recommended corrosion inhibitors and paints from Liebherr for protecting hydraulic cylinder components from corrosion.
Liebherr lh30 1210 hydraulic excavator service repair manualfjjsjeskkekem
The document is a technical manual that was printed on December 25, 2019 at 21:58. It contains instructions and diagrams for mounting different clamping nuts, adjusting swing brakes, and identifying components of hydraulic cylinders and shock absorbers that are at risk for corrosion. It also includes tables listing recommended corrosion inhibitors and paints from Liebherr for protecting hydraulic cylinder components from corrosion.
Liebherr er 902 hydraulic excavator service repair manualfjjsjeskkekem
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Automotive Engine Valve Manufacturing Plant Project Report.pptxSmith Anderson
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
Khushmeet Khushi Resume of manufacturing industry Khushmeet Khushi
A result oriented professional working for Process and New Technology of Manufacturing industry presently associated with Manufacturing Industry as
Asst. Manager in Research & Development. Skilled in manufacturing Process of various type of cords, cables, connector, wire Harness, Remote Control devices, Switches including backward integration thereof. Acquired knowledge of New product and process development, QMS, Compliance and product certification, IPQC, Product & process Stranded, Lean Manufacturing Methodology, and problem solving methodology, VAVE, Etc.
Kalyan chart DP boss guessing matka results➑➌➋➑➒➎➑➑➊➍
8328958814Satta Matka is a number-based game. There are several markets, each with its owner responsible for releasing the lottery satta Matka market results on time. Kalyan market, Worli market, main Mumbai market, Rajdhani market, and Milan market are some of the main markets or bazaars involved in the satta Matka game. The oldest and most legitimate markets are in Kalyan and Main Mumbai. Every Satta Market has an open and close time. The satta results for these markets are published on or shortly after the open and close times. During the open result, two numbers are decoded, one of which is a three-digit number and the other a single-digit number. Similarly, three-digit and single-digit numbers are declared during the satta market's close. The last digit after adding the three digits of the open or close result is usually the single digit declared during the open and close results.KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAINSATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSdp boss net, dp satta, dpboss dpboss, indian satta matka, kalyan matkà result today , matka boss, matka result live, matka satta result today, satamatka com, satta boss, satta matka king, sattamatkà, sattamatkà result, sattamatta com, sattmatka sattmatka, star matka, tara matka, tara satta matka, worli matka, indian matka, matka live, kalyan guessing, satta fix, kalyan final ank, dp matka, dpboss net, sata mata com, सट्टा मटका, sattamatkà 143, golden matka, satta matta matka 143, satta fast, kalyan open, satta 143, dpboss 143 guessing, dpboss satta, golden satta matka, satta bajar
Satta Matka Market is India's leading website providing the quickest sattamatka outcome, experienced in Satta Matka game. Our services include free Satta Matka Trick and Tips for Kalyan Matka and Disawar Satta King, as well as satta matka graphs, online play, tips and more. Our team of experts strive to help you recoup your losses quickly through our proposals such as Free Satta Matka Tips and Kalyan Bazar Tips. We are known as India's best Matka DpBoss portal site, here to deliver updates on all sorts of Satta Market like Kalyan Bazar, Milan, Rajdhani, Time Bazaar, Main and the most current charts. Stay tuned with us for more live updates on the Satta market
2. 15 - Engine
42 - Rocker and Fittings
00 - General
15 - 143 9813/6450-1 15 - 143
00 - General
Introduction .................................................. 15-143
Component Identification ............................. 15-144
Operation ..................................................... 15-145
Check (Condition) ........................................ 15-146
Remove and Install ..................................... 15-146
Disassemble and Assemble ........................ 15-149
Introduction
The rocker assembly is an indirect valve actuating
system consisting of rocker arms and a shaft.
The rocker arm is an oscillating lever that conveys
radial movement from the cam lobe into linear
movement at the poppet valve to open it. One end is
raised and lowered by a rotating lobe of the camshaft
via a tappet and push rod while the other end acts
on the bridge piece which is connected to the valve
stem.
3. 15 - Engine
42 - Rocker and Fittings
00 - General
15 - 144 9813/6450-1 15 - 144
Component Identification
Figure 196.
B
E
D
A
C
A Rocker arm shaft B Rocker arm distancing spring
C Rocker arm shaft support D Exhaust rocker arm
E Intake rocker arm
Figure 197.
F
J
G
K
HL
F Rocker arm body G Hydraulic tappet oil refill line
H Valve tappet lubrication line J Valve tappet
K Hydraulic tappet L Oil flow line
4. 15 - Engine
42 - Rocker and Fittings
00 - General
15 - 145 9813/6450-1 15 - 145
Operation
When the camshaft lobe raises the push-rod, the
push-rod pushes the rocker arm up. Due to this the
rocker arm presses down on the valve stem to open
the valve. When the rocker arm returns due to the
camshafts rotation, the valve spring closes the valve.
Lubrication
Oil is fed from the main gallery through a drilling
which passes up through the crankcase and cylinder
head to a small transfer gallery under the rocker
shaft pedestal. The oversize rocker shaft fixing bolt
hole allows oil to pass into a drilling in the centre of
the rocker shaft. Further cross drillings transfer oil
to each of the rocker pivot bushes. A cross drilling
in each rocker transfers oil to the top of the rocker
where it flows by gravity along a groove to the rocker
tip.
Figure 198.
1 Main gallery 2 Small transfer gallery
3 Shaft pedestal 4 Rocker shaft fixing bolt hole
5 Centre rocker shaft drilling 6 Cross drillings
7 Rocker pivot bushes 8 Cross drilling
9 Groove
5. 15 - Engine
42 - Rocker and Fittings
00 - General
15 - 146 9813/6450-1 15 - 146
Check (Condition)
1. Check the rocker shaft and rocker bushings for
signs of damage and excessive wear. Measure
the rocker shaft diameter and rocker bearing
bushes to confirm they are within service limits,
refer to Technical Data (PIL 15-42). Note: The
rocker bearing bushes are not renewable. If
a rocker bearing bush is damaged or worn
the rocker must be renewed as a complete
assembly.
2. Make sure that all oil-ways and cross drillings in
the rocker shaft and pedestals are clear and free
from debris. Use an air line to blow through cross
drillings.
Remove and Install
Before Removal
1. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
2. Get access to the engine.
3. Disconnect and remove the fuel pipes from the
fuel injectors. Refer to (PIL 18-96).
4. Remove the rocker cover. Refer to (PIL
15-42-06).
Remove
1. Remove the rocker shaft fixing screws.
Figure 199.
BA
C
A Rocker shaft fixing screw (x3)
B Rocker arm assembly
C Cylinder head
2. Make sure that you keep all the fixing screws in
their original positions.
3. Lift the rocker arm assembly from the cylinder
head completely.
6. 15 - Engine
42 - Rocker and Fittings
00 - General
15 - 147 9813/6450-1 15 - 147
Figure 200.
B
C
B Rocker arm assembly
C Cylinder head
4. Lift off the valve bridge pieces from the pairs of
inlet and exhaust valves.
Figure 201.
D
E
D Valve bridge (x6)
E Push rod (x6)
5. Remove the push rods from the crankcase.
Before Installation
1. Make sure that all items are clean and free from
damage and corrosion. If components within the
rocker assembly are damaged or worn.
2. Make sure that all oilways and cross drillings in
the cylinder head, rocker shaft and pedestals are
clear and free from debris. Use an air line to blow
through the cross drillings.
3. Use a suitable degreasing agent to clean the top
of the cylinder head.
Install
1. Replacement is the reversal of the removal
procedure.
2. Insert the push rods into the crankcase. Make
sure that they engage with the camshaft tappets.
Figure 202.
E
E
F
E Push rod
F Camshaft tappet
3. Install the bridge pieces on to the pairs of inlet
and exhaust valves in the cylinder head.
Figure 203.
D
D
C
C Cylinder head
D Valve bridge
4. Align the rocker arm assembly on a level surface.
7. 15 - Engine
42 - Rocker and Fittings
00 - General
15 - 148 9813/6450-1 15 - 148
5. Make sure you install the rocker arm assembly
on the cylinder head with respect to the plug and
the holder.
Figure 204.
E
H
E Push rod
H Plug
Figure 205.
G
B
B Rocker arm assembly
G Holder
6. Make sure that the rocker arm assembly is
seated properly on the push rod.
7. Make sure that you put the crankshaft gear key
in the position as shown to avoid the rocker arm
rod bending at the time of tightening the fixing
screws.
Figure 206.
J
J Gear key
8. Put the rocker arm fixing screws and tighten the
screws in the sequence shown.
Figure 207.
A
B
2
31
A Rocker shaft fixing screw (1-3)
B Rocker arm assembly
9. Tighten the screws to the correct torque value.
After Installation
1. Measure and adjust the valve clearances. Refer
to (PIL 15-30).
2. Install the rocker cover. Refer to (PIL 15-42-06).
3. Install and connect the fuel pipes to the fuel
injectors. Refer to (PIL 18-96).
Table 64. Torque Values
Item Nm
A 25
8. 15 - Engine
42 - Rocker and Fittings
00 - General
15 - 149 9813/6450-1 15 - 149
Disassemble and Assemble
Before Disassembly
1. Remove the rocker cover. Refer to (PIL 15-42).
2. Remove the rocker assembly. Refer to (PIL
15-42).
Disassemble
1. Remove the retainer ring.
Figure 208.
C
D
B
A
A Discharge rocker arm
B Hydraulic tappet
C Retainer
D Shoulder ring
2. Remove the shoulder ring.
3. Remove the rockers and the holders from the
rocker shaft.
Figure 209.
A
G
E
F
A Discharge rocker arm
E Rocker shaft
F Holder
G Holder 1
4. Label the rockers and the holders to make sure
that they are installed in the correct positions on
assembly.
5. Remove the tappets from the rocker.
Figure 210.
B A
A Discharge rocker arm
B Hydraulic tappet
6. Check (Condition) of the rocker arm assembly for
signs of damage and excessive wear. Refer to
(PIL 15-42).
Assemble
1. Assembly is the reversal of the disassembly
procedure.
2. Install the tappets into the rocker arm.
2.1. Insert the tappets into to the hydraulic
tappet insertion pliers.
2.2. Fill the chamber of the tappet with oil.
2.3. Put the pad on the tappet.
Figure 211.
A
B
H
J
A Discharge rocker arm
B Hydraulic tappet
H Chamber
J Pad
2.4. Position the rocker arm in the pliers.
2.5. Push the tappet through the rocker arm,
using the pliers, until the tappet is properly
inserted.
3. Lubricate the rocker shaft with clean engine oil.
9. 15 - Engine
42 - Rocker and Fittings
00 - General
15 - 150 9813/6450-1 15 - 150
4. Install the rocker arms in the correct position, turn
the rocker shaft with the lower height towards the
timing gear system side.
5. Put the lock ring into the seat of the rocker shaft.
Figure 212.
D
C
C
E
L
K
E
C Retainer
D Shoulder ring
E Rocker shaft
K Seat
L Rocker shaft lower height
6. Position the fixing screw support surface facing
upwards.
7. Put the two shoulder rings on the rocker shaft.
8. Sequentially put the suction rocker arm, the
holder and the discharge rocker arm on the
rocker shaft.
Figure 213.
F
D
C A
N
G
M
E
A Discharge rocker arm
C Retainer
D Shoulder ring
E Rocker shaft
F Holder
G Holder 1
M Spring
N Suction rocker arm
9. The discharge rocker arm is shorter than the
suction rocker arm.
10. install the spring on the rocker shaft.
11. Do the steps 8 and 10 for all the remaining rocker
arms.
12. Install the holder 1 with the last pair of rocker arm
towards the flywheel.
13. The spring makes sure that the holder and the
holder 1 are kept in place.
14. Make sure that the rockers are installed in their
original positions along the rocker shaft.
15. Put the shoulder rings and the lock ring to lock all
the components on the rocker shaft.
After Assembly
1. Install the rocker assembly. Refer to (PIL 15-42).
2. Install the rocker cover. Refer to (PIL 15-42).
10. 15 - Engine
45 - Oil Sump
00 - General
15 - 157 9813/6450-1 15 - 157
00 - General
Introduction .................................................. 15-157
Technical Data ............................................. 15-158
Component Identification ............................. 15-158
Remove and Install ..................................... 15-159
Introduction
The lubrication system is supplied by the oil sump
that forms the lower part of the engine. Oil is
taken from the sump by the gear pump and it is
passed through an oil filter. The oil is then delivered
under pressure through a system of passages drilled
through the engine.
11. 15 - Engine
45 - Oil Sump
00 - General
15 - 158 9813/6450-1 15 - 158
Technical Data
Table 65.
Oil sump type Wet
Oil sump capacity 7.5L
Component Identification
Figure 214.
A
A Oil Sump
12. 15 - Engine
45 - Oil Sump
00 - General
15 - 159 9813/6450-1 15 - 159
Remove and Install
Oil
Oil is toxic. If you swallow any oil, do not induce
vomiting, seek medical advice. Used engine oil
contains harmful contaminants which can cause skin
cancer. Do not handle used engine oil more than
necessary. Always use barrier cream or wear gloves
to prevent skin contact. Wash skin contaminated with
oil thoroughly in warm soapy water. Do not use petrol,
diesel fuel or paraffin to clean your skin.
CAUTION! It is illegal to pollute drains, sewers
or the ground. Clean up all spilt fluids and/or
lubricants.Used fluids and/or lubricants, filters and
contaminated materials must be disposed of in
accordance with local regulations. Use authorised
waste disposal sites.
CAUTION! Oil will gush from the hole when the drain
plug is removed. Keep to one side when you remove
the plug.
Before Removal
1. Get access to the engine.
2. Drain the engine oil, refer to (PIL 15-00)
Refer to: Engine > General > General > Drain and
Fill (Page 15-17).
Remove
1. Remove the screws that attach the oil sump to
the bedplate.
2. Insert plates in the areas shown by the arrows.
Figure 215.
D
EE
E E
D Oil sump
E Plate insertion areas
3. Lift the plates to remove the oil sump.
4. Remove the remaining sealant from the oil sump
and bedplate contact surfaces.
5. Remove the screws that attach the oil intake
pipe.
6. Remove the oil intake pipe and the gasket.
Discard the gasket.
Figure 216.
G
H
F
F Screw
G Oil intake pipe
H Gasket
7. Remove the oil vapour pipes.
Figure 217.
J
J Oil vapour pipes
Install
1. Apply Loctite 648 on the threads of the oil vapour
pipes.
2. Install the oil vapour pipes.
3. Put a new gasket in the seat of the oil intake pipe.
4. Attach the oil intake pipe onto the bedplate with
the screws.
5. Tighten the screws to the correct torque value.
6. Make sure that the oil sump is clean and free from
contamination.
7. Make sure that the contact faces on the oil sump
and bedplate are clean.
13. 15 - Engine
45 - Oil Sump
00 - General
15 - 160 9813/6450-1 15 - 160
8. Apply a bead of sealant (Loctite 5660) on the oil
sump contact surface to the specified thickness.
Dimension: 2.5mm
Figure 218.
K
K
M
L
K Mounting studs
L Screw
M Sealant application surface
9. Install the mounting studs to help you to position
the oil sump.
10. Put the oil sump on the bedplate. Make sure that
the screw holes are aligned.
11. Strictly follow the torque tightening sequence.
Tighten the screws to the correct torque value.
Figure 219. Torque Sequence
10 11 12 13
14
18
17
16
15
20 194 3 2
6
5
7
8
9
1
12. After you tighten all of the screws, loosen screw
no.1 and tighten again to the correct torque
value.
13. Clean and install the drain plugs with a new O-
ring. Tighten the plug to the correct torque value.
14. Through one of the filler points, fill the engine with
the recommended oil to the MAX mark on the
dipstick.
15. Wipe off any spilt oil, install the filler cap and
make sure it is secure.
16. Operate the engine, until the oil pressure low
warning light has extinguished.
17. Check for oil leakage.
18. When the oil has cooled, check the oil level
again, and if necessary top up with clean engine
oil.
Table 66. Torque Values
Item Nm
B 35
F 10
L 25
14. 15 - Engine
45 - Oil Sump
03 - Drain Plug
15 - 161 9813/6450-1 15 - 161
03 - Drain Plug
Remove and Install
Oil
Oil is toxic. If you swallow any oil, do not induce
vomiting, seek medical advice. Used engine oil
contains harmful contaminants which can cause skin
cancer. Do not handle used engine oil more than
necessary. Always use barrier cream or wear gloves
to prevent skin contact. Wash skin contaminated with
oil thoroughly in warm soapy water. Do not use petrol,
diesel fuel or paraffin to clean your skin.
CAUTION! It is illegal to pollute drains, sewers
or the ground. Clean up all spilt fluids and/or
lubricants.Used fluids and/or lubricants, filters and
contaminated materials must be disposed of in
accordance with local regulations. Use authorised
waste disposal sites.
Remove
Drain the oil when the engine is warm as
contaminants held in suspension will then be drained
with the oil.
1. Gain access to the oil sump.
2. Place a container of suitable size below the drain
plug.
3. Remove the oil filler cap.
Figure 220.
A
A Oil filler cap
CAUTION! Oil will gush from the hole when the
drain plug is removed. Keep to one side when
you remove the plug.
4. Remove the oil sump drain plug and O-ring. Let
the oil drain out.
Figure 221.
B C
B Drain plug
C O-ring
Install
1. Clean and install the drain plug with a new O-ring.
2. Tighten the plug to the correct torque value.
3. Through one of the filler points, fill the engine with
the recommended oil to the MAX mark on the
dipstick.
4. Wipe off any spilt oil, install the filler cap and
make sure it is secure.
5. Operate the engine, until the oil pressure low
warning light has extinguished.
6. Check for oil leakage.
7. When the oil has cooled, check the oil level
again, and if necessary top up with clean engine
oil.
Table 67. Torque Values
Item Nm
B 35
15. 15 - Engine
45 - Oil Sump
09 - Dipstick
15 - 162 9813/6450-1 15 - 162
09 - Dipstick
Check (Level)
1. Remove the engine oil dipstick.
2. Make sure that the oil level is at the MAX mark
on the dipstick.
3. If the oil level is below the required quantity, fill
the engine with the recommended oil through the
oil filler point.
Figure 222.
A
A Oil filler cap
Figure 223.
E
F
D
D Dipstick
E Maximum level mark
F Minimum level mark
16. 15 - Engine
45 - Oil Sump
10 - Dipstick Pipe
15 - 163 9813/6450-1 15 - 163
10 - Dipstick Pipe
Remove and Install
Before removal
1. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
2. Get access to the engine.
Remove
1. Remove the screw.
2. Pull out the oil dipstick pipe in the direction of the
arrow.
Figure 224.
A
B
C
A Dipstick
B Dipstick pipe
C Screw
Install
1. Put the new gasket on the seat of the pipe.
Figure 225.
B
E
D
B
B Dipstick pipe
D Seat
E Gasket
2. Attach the oil dipstick pipe to the crankcase with
the screw.
Figure 226.
B
C F
B Dipstick pipe
C Screw
F Manifold
3. Tighten the pipe on the manifold.
4. Check the gaskets are correctly installed.
Figure 227.
G
B
A
A Dipstick
B Dipstick pipe
G Gasket
5. Put the dipstick into the pipe.
After installation
1. Start the engine and check for any leakage.
17. 15 - Engine
48 - Grid Heater
00 - General
15 - 166 9813/6450-1 15 - 166
Diagram
Grid heater link harnesses are used for the earth and
power supply for the grid heater.
Figure 229.
A
B
A Fuse
B Grid heater
Remove and Install
Remove
1. Make the machine safe. Refer to (PIL 01-03).
2. Let the engine cool.
3. Get access to the engine intake manifold.
4. Remove the bolts and washers to remove the
earth cable and the intake hose. Refer to Figure
230.
5. Remove the intake hose with the flange that
connect to the grid heater. Refer to Figure 230.
6. Remove the grid heater with the gaskets from the
intake manifold. Refer to Figure 230.
Figure 230.
B
C
D
E
F
E
A
B
A
G
H
J
A Intake manifold
B Bolts
C Washers
D Intake hose with flange
E Gaskets
F Grid heater
G Earth cable
H Washer
J Bolt
6.1. The grid heater has two gaskets, attached
above and below the heater. Refer to Figure
230.
Install
1. Installation is the opposite of the removal
procedure.
2. If the grid heater is removed or replaced, always
replace the gaskets with the new.
3. Install the grid heater and intake hose with the
flange to the intake manifold.
3.1. Tighten the bolts to the correct specified
torque value.
Torque: 25N·m
18. 15 - Engine
48 - Grid Heater
00 - General
15 - 167 9813/6450-1 15 - 167
4. Use the bolts and washers to install the earth
cable.
19. 15 - Engine
51 - Timing Gear
00 - General
15 - 169 9813/6450-1 15 - 169
00 - General
Introduction .................................................. 15-169
Component Identification ............................. 15-170
Check (Condition) ........................................ 15-172
Remove and Install ..................................... 15-172
Introduction
The timing gears are located inside a casing at the
front end of the engine.
The engine must be timed so that the camshaft
operates the valves at the correct time relative to the
crankshaft position.
Valve timing is achieved by ensuring that the
camshaft drive gear is meshed to the crankshaft gear
at their correct angular positions, refer to Engine-
General, Operation, The Four Stroke Cycle (PIL
15-00) for more information about valve timing.
20. 15 - Engine
51 - Timing Gear
00 - General
15 - 170 9813/6450-1 15 - 170
Component Identification
Figure 231.
E
B
A
F
D
C
A Crankshaft B Camshaft
C Crankshaft gear D Intermediate gear
E Camshaft gear F Fuel injection pump gear
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. 15 - Engine
51 - Timing Gear
00 - General
15 - 171 9813/6450-1 15 - 171
Figure 232.
A
F
G
E
J
H
D
C
A Crankshaft D Intermediate gear
E Camshaft gear F Fuel injection pump gear
G Intermediate gear pin H Phonic wheel positioning reference pin on
camshaft
J Camshaft phonic wheel
23. 15 - Engine
51 - Timing Gear
00 - General
15 - 172 9813/6450-1 15 - 172
Check (Condition)
1. Inspect the gears for wear or damage. If one or
more of the gears are worn or damaged, replace
them.
2. Measure the backlash of the gears with a feeler
gauge. Refer to Figure 233.
Figure 233.
3. Make sure that the backlash is within the
specified limits. Refer to Technical data (PIL
15-51).
3.1. If the backlash measurement is greater than
the maximum, install new gears. Refer to
(PIL 15-51).
Remove and Install
Remove
1. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
2. Get access to the engine.
3. Remove the timing gear front case. Refer to (PIL
15-51-21).
4. Remove the nut that attaches the high pressure
fuel pump gear to the pump shaft.
Figure 234.
B
A
A High pressure fuel pump gear
B Nut - Fuel pump gear
5. Install the pump gear removal tool on the thread
of the gear.
Figure 235.
C
C Pump gear removal tool
6. Remove the high pressure fuel pump. Refer to
(PIL 18-18-15).
24. 15 - Engine
51 - Timing Gear
00 - General
15 - 173 9813/6450-1 15 - 173
Figure 236.
D
D High pressure fuel pump
7. Remove the high pressure fuel pump gear.
8. Remove the screws that attach the phonic wheel
to the camshaft gear.
9. Remove the phonic wheel.
10. Remove the bolt that attaches the camshaft gear.
11. Remove the camshaft gear.
Figure 237.
E
J
G H
F
L
K
E Screw - Phonic wheel
F Phonic wheel
G Bolt - Camshaft gear
H Camshaft gear
J Lock ring
K Shoulder ring
L Intermediate gear
12. Remove the lock ring and the shoulder ring from
the intermediate gear.
13. Remove the intermediate gear from the support.
14. Remove the screws that attach the intermediate
gear support.
15. Remove the shoulder ring and the intermediate
gear support.
Figure 238.
N
P
M
M Screw - Intermediate gear support
N Shoulder ring
P Intermediate gear support
Install
1. Make sure that the key is correctly installed on
the camshaft.
2. Put the camshaft gear on the camshaft. The key
seat on the gear must align with the key on the
shaft.
3. Attach the camshaft gear with the bolt. Do not
torque tighten at this stage.
Figure 239.
R
F
G
H E
S
Q
E Screw - Phonic wheel
F Phonic wheel
G Bolt - Camshaft gear
H Camshaft gear
Q Camshaft
R Camshaft key
S Reference pin
4. Put the reference pin on the camshaft gear.
5. Put the phonic wheel on the camshaft gear.
6. Attach the phonic wheel with the screws. Do not
torque tighten at this stage.
7. Replace the gasket on the intermediate gear
support.