This document provides service and repair instructions for fuel injectors in JCB Loadall vehicles. It describes injector components and identification, includes a check procedure using diagnostic tools, and outlines removal and installation steps. Special tools are required for tasks like leak testing and installing injector seals. Torque specifications are provided for tightening injector clamps and sleeves.
This document contains parts information for various engine components. It includes lists of parts with part numbers, reference numbers, serial number ranges they fit, and whether they are for replacement or within an assembly. The parts are for McCormick tractors from 2009-2011 and include short and long engines, blocks, heads, pumps, sensors and other engine systems.
Mc cormick cx series (2001 2007) - cx01-cx02 - cx50, cx60 tractor service rep...fusefjjskekemm
This document contains parts listings and repair information for various components of McCormick tractors models CX01-CX02 and CX50-CX60 from 2001-2007. It includes part numbers, descriptions, repair procedures and time estimates for repairs. The document is organized by component (engine, radiator, air cleaner, etc) and provides exploded views of assemblies.
Mc cormick c max tier 2 (2003- ) - rs20 - 75 tractor service repair manualfusefjjskekemm
This document contains technical specifications and part numbers for components of an engine. It includes information like part names and numbers, reference numbers, serial numbers, replacement indicators, and other technical details. The parts are associated with markings like engine, kit, housing, sensor, crankcase, gasket, and others. Quantities and applications are provided for some parts.
Mc cormick c max rps tier 3 (2008- ) - rs24 - 110 tractor service repair manualfusefjjskekemm
This document provides parts information for various Perkins diesel engines including the engine model, serial number ranges, and part numbers for replacements or repair kits. It includes lists of components for the cylinder block, crankshaft, pistons, cylinder head, fuel pump, and other engine parts. Notes provide information on reference numbers, serial number ranges for parts, and whether items are replacement parts or components of larger assemblies.
Mc cormick c max rps tier 3 (2008- ) - rs24 - 105 tractor service repair manualfusefjjskekemm
This document provides component part listings and information for various engine systems. It includes listings of parts such as pistons, rods, bearings, gaskets, sensors, pumps, housings and other engine components. Each part includes information like the reference number, quantity needed, and applicability based on engine or serial number. The document also indicates when a part is for replacement or is part of a larger assembly.
Mc cormick c max rps tier 3 (2008- ) - rs24 - 90 tractor service repair manualfusefjjskekemm
This document contains parts listings and component information for an engine. It lists over 100 individual parts and components, including pistons, rods, bearings, valves, pumps, sensors, gaskets and other engine parts. Each part is identified by number and name. Additional information provided includes reference numbers, serial number ranges for applicability, replacement part numbers, and kit information. The document appears to be from a manual or catalog for maintenance and repair of this engine.
Mc cormick c max rps tier 2 (2004-2012) - rs21 - 95 tractor service repair ma...fusefjjskekemm
1) The document provides information on engine parts including identification numbers, replacement times, and part numbers.
2) The parts are identified by number and name, and include details like serial numbers, replacement times, and applications to specific markets or engine models.
3) The summaries group related parts and provide filtering details to help technicians find the correct replacement part.
Mc cormick c l europa tier 3 (2008-2015) - rs51 - c70l tractor service repair...fusefjjskekemm
This document contains parts listings and component details for various engine parts. It includes identification numbers, part names, quantities and other specifications for items like cylinders, shafts, gears, pumps, sensors and housings that make up engines and related systems for agricultural equipment. Replacement part numbers and additional information is provided for servicing needs.
This document contains parts information for various engine components. It includes lists of parts with part numbers, reference numbers, serial number ranges they fit, and whether they are for replacement or within an assembly. The parts are for McCormick tractors from 2009-2011 and include short and long engines, blocks, heads, pumps, sensors and other engine systems.
Mc cormick cx series (2001 2007) - cx01-cx02 - cx50, cx60 tractor service rep...fusefjjskekemm
This document contains parts listings and repair information for various components of McCormick tractors models CX01-CX02 and CX50-CX60 from 2001-2007. It includes part numbers, descriptions, repair procedures and time estimates for repairs. The document is organized by component (engine, radiator, air cleaner, etc) and provides exploded views of assemblies.
Mc cormick c max tier 2 (2003- ) - rs20 - 75 tractor service repair manualfusefjjskekemm
This document contains technical specifications and part numbers for components of an engine. It includes information like part names and numbers, reference numbers, serial numbers, replacement indicators, and other technical details. The parts are associated with markings like engine, kit, housing, sensor, crankcase, gasket, and others. Quantities and applications are provided for some parts.
Mc cormick c max rps tier 3 (2008- ) - rs24 - 110 tractor service repair manualfusefjjskekemm
This document provides parts information for various Perkins diesel engines including the engine model, serial number ranges, and part numbers for replacements or repair kits. It includes lists of components for the cylinder block, crankshaft, pistons, cylinder head, fuel pump, and other engine parts. Notes provide information on reference numbers, serial number ranges for parts, and whether items are replacement parts or components of larger assemblies.
Mc cormick c max rps tier 3 (2008- ) - rs24 - 105 tractor service repair manualfusefjjskekemm
This document provides component part listings and information for various engine systems. It includes listings of parts such as pistons, rods, bearings, gaskets, sensors, pumps, housings and other engine components. Each part includes information like the reference number, quantity needed, and applicability based on engine or serial number. The document also indicates when a part is for replacement or is part of a larger assembly.
Mc cormick c max rps tier 3 (2008- ) - rs24 - 90 tractor service repair manualfusefjjskekemm
This document contains parts listings and component information for an engine. It lists over 100 individual parts and components, including pistons, rods, bearings, valves, pumps, sensors, gaskets and other engine parts. Each part is identified by number and name. Additional information provided includes reference numbers, serial number ranges for applicability, replacement part numbers, and kit information. The document appears to be from a manual or catalog for maintenance and repair of this engine.
Mc cormick c max rps tier 2 (2004-2012) - rs21 - 95 tractor service repair ma...fusefjjskekemm
1) The document provides information on engine parts including identification numbers, replacement times, and part numbers.
2) The parts are identified by number and name, and include details like serial numbers, replacement times, and applications to specific markets or engine models.
3) The summaries group related parts and provide filtering details to help technicians find the correct replacement part.
Mc cormick c l europa tier 3 (2008-2015) - rs51 - c70l tractor service repair...fusefjjskekemm
This document contains parts listings and component details for various engine parts. It includes identification numbers, part names, quantities and other specifications for items like cylinders, shafts, gears, pumps, sensors and housings that make up engines and related systems for agricultural equipment. Replacement part numbers and additional information is provided for servicing needs.
Mc cormick c l europa tier 3 (2008-2015) - rs51 - c65l tractor service repair...fusefjjskekemm
This document contains parts information for an engine, including components like the cylinder block, cylinder head, camshaft, crankshaft, pistons, and sump. It provides identification numbers, references, quantities, and other technical specifications for each part listed. The parts are for a Perkins XL75076 engine that meets C-L Europa Tier 3 emissions standards from 2008-2015.
Komatsu d39 px 21 bulldozer service repair manual sn 1501 and upfusefjjskekemm
This document provides instructions for removing and installing the fuel injection pump assembly and cylinder head assembly on Komatsu excavators. Key steps include draining coolant, disconnecting wiring harnesses and hoses, removing covers and brackets, and using specialty tools to properly align components during installation. Precise torques are specified for fasteners.
Komatsu d39 ex 21 bulldozer service repair manual sn 1501 and upfusefjjskekemm
This document provides instructions for removing and installing the fuel injection pump assembly and cylinder head assembly on Komatsu excavators. Key steps include draining coolant, disconnecting wiring harnesses and hoses, removing covers and brackets, and using specialty tools to properly align components during installation. Precise torques are specified for fasteners. The process is reversed for installation, with adjustments and reconnections noted.
Komatsu d37 px 21 bulldozer service repair manual sn 5501 and upfusefjjskekemm
This document provides instructions for removing and installing the fuel injection pump assembly and cylinder head assembly on Komatsu excavators. Key steps include draining coolant, disconnecting wiring harnesses and hoses, removing covers and guards, and using specialty tools to properly align components during installation. Precise torques are specified for fasteners. The process is reversed for installation, and adjustments may be required.
Komatsu d37 p 5a dozer bulldozer service repair manualfusefjjskekemm
This shop manual provides instructions for maintenance and repair of Komatsu bulldozers. It details the removal and installation procedures for components like the starting motor and alternator. Safety precautions are outlined, including the need to disconnect battery cables before working, wear protective equipment, and secure equipment properly for repairs. The manual contents include general information, structure and function, testing and adjusting, disassembly and assembly, and maintenance standards.
Komatsu d37 ex 21 bulldozer service repair manual sn 5501 and upfusefjjskekemm
This document provides instructions for removing and installing the fuel injection pump assembly and cylinder head assembly on Komatsu excavators. Key steps include draining coolant, disconnecting wiring harnesses and hoses, removing covers and brackets, and using special tools to properly align components during installation. Precise torques are specified for fasteners.
Komatsu d37 e 5 dozer bulldozer service repair manualfusefjjskekemm
This document provides instructions for servicing components of Komatsu bulldozers, including removal and installation of the starting motor, alternator, and engine oil cooler core. Key steps include disconnecting battery cables and component wiring before removal, and reconnecting wires and adjusting components like belts during installation. Safety precautions are outlined such as ensuring all pressure is released from circuits before disconnecting hoses and wearing protective equipment.
Komatsu d31 s 20 dozer bulldozer service repair manualfusefjjskekemm
- The document is a shop manual that provides instructions for maintenance and repair of Komatsu bulldozers.
- It contains safety notices and general precautions for working on equipment. Proper personal protective equipment and safety procedures are emphasized.
- The document is divided into sections covering general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics.
- Specific instructions are provided for removal and installation of components like the starting motor and alternator. Torque specifications and other details are given.
Komatsu d31 q 20 dozer bulldozer service repair manualfusefjjskekemm
This shop manual provides instructions for maintenance and repair of Komatsu bulldozers. It details the removal and installation procedures for components like the starting motor and alternator. Safety precautions are outlined, including the need to disconnect battery cables before working, wear protective equipment, and secure equipment properly for repairs. The manual contents include general information, structure and function, testing and adjusting, disassembly and assembly, and maintenance standards.
Komatsu d31 px 21 bulldozer service repair manual sn 50501 and upfusefjjskekemm
This document provides removal and installation instructions for various components of a Komatsu excavator, including the fuel injection pump assembly, cylinder head assembly, and other engine parts. It lists over 40 steps for removing parts, identifies any necessary special tools, and notes torque specifications and other details for reinstallation. Component names, part numbers, and diagrams are included to aid in the disassembly and assembly process.
Komatsu d31 pll 20 dozer bulldozer service repair manualfusefjjskekemm
This document provides instructions for removing and installing starting motors, alternators, and engine oil cooler cores on Komatsu bulldozers. Key steps include disconnecting battery cables and electrical connections, loosening mounting hardware, and removing components. Reinstallation is the reverse of removal, taking care to reconnect all electrical connections and adjust components like fan belts to the specified torque settings. Safety precautions are provided to prevent injury when working on energized or high-pressure systems.
John deere 828 d walk behind snowblowers service repair manual (tm1612)fusefjjskekemm
This technical manual provides service information for John Deere 524D, 724D, 826D, 828D, and 1032D walk-behind snowblowers. The manual is organized by system and contains sections on specifications, component location, theory of operation, troubleshooting, diagnosis, testing and adjustments, and repair. It provides instructions for technicians on maintaining and repairing the snowblowers. One section provides steps for adjusting the friction drive clutch on models 828D and 1032D to compensate for wear.
John deere 826 d walk behind snowblowers service repair manual (tm1612)fusefjjskekemm
This technical manual provides service information for John Deere 524D, 724D, 826D, 828D, and 1032D walk-behind snowblowers. The manual is organized by system and contains sections on specifications, component location, theory of operation, troubleshooting, diagnosis, testing and adjustments, and repair. It provides instructions for technicians on maintaining and repairing the snowblowers. One section provides steps for adjusting the friction drive clutch on models 828D and 1032D to compensate for wear.
John deere 820 r walk behind tillers service repair manual (tm1687)fusefjjskekemm
This technical manual provides specifications and safety information for John Deere walk-behind tillers models 314F, 518R, and 820R. It contains sections on specifications, safety procedures, troubleshooting, maintenance and repair. The manual is intended for experienced technicians and provides detailed information on the various systems of the tillers.
John deere 724 d walk behind snowblowers service repair manual (tm1612)fusefjjskekemm
This technical manual provides service information for John Deere 524D, 724D, 826D, 828D, and 1032D walk-behind snowblowers. The manual is organized by system and contains sections on specifications, component location, theory of operation, troubleshooting, diagnosis, testing and adjustments, and repair. It provides instructions for technicians on maintaining and repairing the snowblowers. One section provides steps for adjusting the friction drive clutch on models 828D and 1032D to compensate for wear.
John deere 650 ext trail buck utility atv service repair manual (tm2160)fusefjjskekemm
This technical manual provides repair and maintenance instructions for the Trail Buck Utility ATV. It contains sections covering specifications, identification numbers, tools, component locations, schematics, theory of operation, diagnostics, tests, repairs and other topics. The manual is intended for experienced technicians and is organized so that information on each system is kept together. Safety precautions are outlined at the beginning, including proper lifting of equipment, handling of fluids, battery safety, protective clothing, and more. The drive train repair section then provides instructions for removing and installing the front drive shaft.
John deere 650 ex trail buck utility atv service repair manual (tm2160)fusefjjskekemm
This technical manual provides repair and maintenance instructions for the Trail Buck Utility ATV. It contains sections covering specifications, identification numbers, tools, component locations, schematics, theory of operation, diagnostics, tests, repairs and other topics. The manual is intended for experienced technicians and is organized so that information on each system is kept together. Safety precautions are outlined at the beginning, including proper lifting of equipment, handling of fluids, battery safety, protective clothing, and more. Procedures for front drive shaft removal and installation are then described.
John deere 650 trail buck utility atv service repair manual (tm2160)fusefjjskekemm
This technical manual provides repair and maintenance instructions for the Trail Buck Utility ATV. It contains sections covering specifications, identification numbers, tools, component locations, schematics, theory of operation, diagnostics, tests, repairs and other topics. The manual is intended for experienced technicians and is organized so that information on each system is kept together. Safety precautions are outlined at the beginning, including proper lifting of equipment, handling of fluids, battery safety, protective clothing, and more. The drive train repair section then provides instructions for removing and installing the front drive shaft.
John deere 524 d walk behind snowblowers service repair manual (tm1612)fusefjjskekemm
This technical manual provides instructions for servicing John Deere 524D, 724D, 826D, 828D, and 1032D walk-behind snowblowers. It contains sections covering specifications, component locations, theory of operation, troubleshooting, diagnosis, tests and adjustments, and repair. The manual aims to provide technicians with the information needed to service the snowblowers and notes that not all sections may apply depending on the system being covered. It also reserves the right to make changes without notice.
John deere 518 r walk behind tillers service repair manual (tm1687)fusefjjskekemm
This technical manual provides specifications and safety information for John Deere walk-behind tillers models 314F, 518R, and 820R. It contains sections on specifications, safety procedures, maintenance, troubleshooting, and repair. The manual aims to offer technicians an organized resource to service these tillers safely and effectively. Safety is a top priority, with warnings about handling chemicals, fire hazards, rotating parts, and more.
Mc cormick c l europa tier 3 (2008-2015) - rs51 - c65l tractor service repair...fusefjjskekemm
This document contains parts information for an engine, including components like the cylinder block, cylinder head, camshaft, crankshaft, pistons, and sump. It provides identification numbers, references, quantities, and other technical specifications for each part listed. The parts are for a Perkins XL75076 engine that meets C-L Europa Tier 3 emissions standards from 2008-2015.
Komatsu d39 px 21 bulldozer service repair manual sn 1501 and upfusefjjskekemm
This document provides instructions for removing and installing the fuel injection pump assembly and cylinder head assembly on Komatsu excavators. Key steps include draining coolant, disconnecting wiring harnesses and hoses, removing covers and brackets, and using specialty tools to properly align components during installation. Precise torques are specified for fasteners.
Komatsu d39 ex 21 bulldozer service repair manual sn 1501 and upfusefjjskekemm
This document provides instructions for removing and installing the fuel injection pump assembly and cylinder head assembly on Komatsu excavators. Key steps include draining coolant, disconnecting wiring harnesses and hoses, removing covers and brackets, and using specialty tools to properly align components during installation. Precise torques are specified for fasteners. The process is reversed for installation, with adjustments and reconnections noted.
Komatsu d37 px 21 bulldozer service repair manual sn 5501 and upfusefjjskekemm
This document provides instructions for removing and installing the fuel injection pump assembly and cylinder head assembly on Komatsu excavators. Key steps include draining coolant, disconnecting wiring harnesses and hoses, removing covers and guards, and using specialty tools to properly align components during installation. Precise torques are specified for fasteners. The process is reversed for installation, and adjustments may be required.
Komatsu d37 p 5a dozer bulldozer service repair manualfusefjjskekemm
This shop manual provides instructions for maintenance and repair of Komatsu bulldozers. It details the removal and installation procedures for components like the starting motor and alternator. Safety precautions are outlined, including the need to disconnect battery cables before working, wear protective equipment, and secure equipment properly for repairs. The manual contents include general information, structure and function, testing and adjusting, disassembly and assembly, and maintenance standards.
Komatsu d37 ex 21 bulldozer service repair manual sn 5501 and upfusefjjskekemm
This document provides instructions for removing and installing the fuel injection pump assembly and cylinder head assembly on Komatsu excavators. Key steps include draining coolant, disconnecting wiring harnesses and hoses, removing covers and brackets, and using special tools to properly align components during installation. Precise torques are specified for fasteners.
Komatsu d37 e 5 dozer bulldozer service repair manualfusefjjskekemm
This document provides instructions for servicing components of Komatsu bulldozers, including removal and installation of the starting motor, alternator, and engine oil cooler core. Key steps include disconnecting battery cables and component wiring before removal, and reconnecting wires and adjusting components like belts during installation. Safety precautions are outlined such as ensuring all pressure is released from circuits before disconnecting hoses and wearing protective equipment.
Komatsu d31 s 20 dozer bulldozer service repair manualfusefjjskekemm
- The document is a shop manual that provides instructions for maintenance and repair of Komatsu bulldozers.
- It contains safety notices and general precautions for working on equipment. Proper personal protective equipment and safety procedures are emphasized.
- The document is divided into sections covering general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics.
- Specific instructions are provided for removal and installation of components like the starting motor and alternator. Torque specifications and other details are given.
Komatsu d31 q 20 dozer bulldozer service repair manualfusefjjskekemm
This shop manual provides instructions for maintenance and repair of Komatsu bulldozers. It details the removal and installation procedures for components like the starting motor and alternator. Safety precautions are outlined, including the need to disconnect battery cables before working, wear protective equipment, and secure equipment properly for repairs. The manual contents include general information, structure and function, testing and adjusting, disassembly and assembly, and maintenance standards.
Komatsu d31 px 21 bulldozer service repair manual sn 50501 and upfusefjjskekemm
This document provides removal and installation instructions for various components of a Komatsu excavator, including the fuel injection pump assembly, cylinder head assembly, and other engine parts. It lists over 40 steps for removing parts, identifies any necessary special tools, and notes torque specifications and other details for reinstallation. Component names, part numbers, and diagrams are included to aid in the disassembly and assembly process.
Komatsu d31 pll 20 dozer bulldozer service repair manualfusefjjskekemm
This document provides instructions for removing and installing starting motors, alternators, and engine oil cooler cores on Komatsu bulldozers. Key steps include disconnecting battery cables and electrical connections, loosening mounting hardware, and removing components. Reinstallation is the reverse of removal, taking care to reconnect all electrical connections and adjust components like fan belts to the specified torque settings. Safety precautions are provided to prevent injury when working on energized or high-pressure systems.
John deere 828 d walk behind snowblowers service repair manual (tm1612)fusefjjskekemm
This technical manual provides service information for John Deere 524D, 724D, 826D, 828D, and 1032D walk-behind snowblowers. The manual is organized by system and contains sections on specifications, component location, theory of operation, troubleshooting, diagnosis, testing and adjustments, and repair. It provides instructions for technicians on maintaining and repairing the snowblowers. One section provides steps for adjusting the friction drive clutch on models 828D and 1032D to compensate for wear.
John deere 826 d walk behind snowblowers service repair manual (tm1612)fusefjjskekemm
This technical manual provides service information for John Deere 524D, 724D, 826D, 828D, and 1032D walk-behind snowblowers. The manual is organized by system and contains sections on specifications, component location, theory of operation, troubleshooting, diagnosis, testing and adjustments, and repair. It provides instructions for technicians on maintaining and repairing the snowblowers. One section provides steps for adjusting the friction drive clutch on models 828D and 1032D to compensate for wear.
John deere 820 r walk behind tillers service repair manual (tm1687)fusefjjskekemm
This technical manual provides specifications and safety information for John Deere walk-behind tillers models 314F, 518R, and 820R. It contains sections on specifications, safety procedures, troubleshooting, maintenance and repair. The manual is intended for experienced technicians and provides detailed information on the various systems of the tillers.
John deere 724 d walk behind snowblowers service repair manual (tm1612)fusefjjskekemm
This technical manual provides service information for John Deere 524D, 724D, 826D, 828D, and 1032D walk-behind snowblowers. The manual is organized by system and contains sections on specifications, component location, theory of operation, troubleshooting, diagnosis, testing and adjustments, and repair. It provides instructions for technicians on maintaining and repairing the snowblowers. One section provides steps for adjusting the friction drive clutch on models 828D and 1032D to compensate for wear.
John deere 650 ext trail buck utility atv service repair manual (tm2160)fusefjjskekemm
This technical manual provides repair and maintenance instructions for the Trail Buck Utility ATV. It contains sections covering specifications, identification numbers, tools, component locations, schematics, theory of operation, diagnostics, tests, repairs and other topics. The manual is intended for experienced technicians and is organized so that information on each system is kept together. Safety precautions are outlined at the beginning, including proper lifting of equipment, handling of fluids, battery safety, protective clothing, and more. The drive train repair section then provides instructions for removing and installing the front drive shaft.
John deere 650 ex trail buck utility atv service repair manual (tm2160)fusefjjskekemm
This technical manual provides repair and maintenance instructions for the Trail Buck Utility ATV. It contains sections covering specifications, identification numbers, tools, component locations, schematics, theory of operation, diagnostics, tests, repairs and other topics. The manual is intended for experienced technicians and is organized so that information on each system is kept together. Safety precautions are outlined at the beginning, including proper lifting of equipment, handling of fluids, battery safety, protective clothing, and more. Procedures for front drive shaft removal and installation are then described.
John deere 650 trail buck utility atv service repair manual (tm2160)fusefjjskekemm
This technical manual provides repair and maintenance instructions for the Trail Buck Utility ATV. It contains sections covering specifications, identification numbers, tools, component locations, schematics, theory of operation, diagnostics, tests, repairs and other topics. The manual is intended for experienced technicians and is organized so that information on each system is kept together. Safety precautions are outlined at the beginning, including proper lifting of equipment, handling of fluids, battery safety, protective clothing, and more. The drive train repair section then provides instructions for removing and installing the front drive shaft.
John deere 524 d walk behind snowblowers service repair manual (tm1612)fusefjjskekemm
This technical manual provides instructions for servicing John Deere 524D, 724D, 826D, 828D, and 1032D walk-behind snowblowers. It contains sections covering specifications, component locations, theory of operation, troubleshooting, diagnosis, tests and adjustments, and repair. The manual aims to provide technicians with the information needed to service the snowblowers and notes that not all sections may apply depending on the system being covered. It also reserves the right to make changes without notice.
John deere 518 r walk behind tillers service repair manual (tm1687)fusefjjskekemm
This technical manual provides specifications and safety information for John Deere walk-behind tillers models 314F, 518R, and 820R. It contains sections on specifications, safety procedures, maintenance, troubleshooting, and repair. The manual aims to offer technicians an organized resource to service these tillers safely and effectively. Safety is a top priority, with warnings about handling chemicals, fire hazards, rotating parts, and more.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
2. 18 - Fuel and Exhaust System
18 - Injection
03 - Injector
18 - 60 9813/7600-3 18 - 60
03 - Injector
Introduction .................................................... 18-60
Component Identification ............................... 18-61
Check (Operation) ......................................... 18-61
Remove and Install ....................................... 18-62
Introduction
The fuel Injectors are electronically controlled and
incorporate a small solenoid valve. The injectors are
supplied with pressurised fuel by the high pressure
fuel injection pump and when energised, the injector
atomizes the fuel into a fine mist so that it can burn
easily by the vehicle’s engine.
The fuel injectors are mounted in the inlet manifold
so that fuel is sprayed directly at the inlet valves. A
fuel supply rail connects all of the fuel injectors to the
fuel supply.
The injector tips are located inside the combustion
chambers, so effective cooling is essential. A special
thin walled sleeve is screwed into the cylinder head
which allows a coolant jacket close to the injector.
The coolant jacket is sealed at the bottom by sealant
on the sleeve thread and at the top by O-ring.
Figure 390.
5 1 4
6
52
3
1 Injector
2 Sleeve
3 Cylinder head
4 Coolant jacket
5 Sleeve thread
6 O-ring
3. 18 - Fuel and Exhaust System
18 - Injection
03 - Injector
18 - 61 9813/7600-3 18 - 61
Component Identification
Figure 391.
N
A
B
D F
G
H
M
C
J
L
E
A Multi-point injector nozzle
B Needle
C Spacer
D Nut
E Valve
F Solenoid coil
G Valve spring
H Calibration dowel
J Injector spring
L Electrical connector
M Return port (bleed off)
N High pressure port and filter element
Check (Operation)
Special Tools
Description Part No. Qty.
Injector Leak-off Test
Kit ((Electronic Engine))
892/12350 1
Injector Cap Kit 892/12359 1
The injectors can be tested using Servicemaster
diagnostics and by means of a leak off test. To test
for a defective injector first use Servicemaster to
diagnose the problems with the high pressure fuel
injection equipment, specifically when the engine
does not start.
Leak Off Test
The leak off test kit must be installed on the engine
and the ServiceMaster must be used to test the
engine.
1. Operate the engine until it reaches its normal
operating temperature.
2. Stop the engine. Remove the bleed off pipe at
each injector. Refer to (PIL 18-96). Cap the open
connectors on the pipes with the caps in the
injector leak off test kit.
Special Tool: Injector Leak-off Test Kit
((Electronic Engine)) (Qty.: 1)
Special Tool: Injector Cap Kit (Qty.: 1)
3. Connect the test pipes to the leak off ports on the
four injectors.
4. Position the four plastic bottles as upright as
possible. Keep the test equipment clear of
components that get hot when the engine is
operated.
5. Connect a test pipe to the leak off ports on the
High Pressure valve outlet. Cap the open pipe.
6. Make sure it is safe to start the engine.
7. Use ServiceMaster to control the tests. Refer to
Fuel Injection - Check Operation (PIL 18-18).
7.1. Fuel System Diagnostic Test (Cranking
Only).
7.2. Fuel System Diagnostic Tests (Engine
Running).
8. Examine the fuel levels in the test bottles. If the
difference between any of the levels is more than
10 ml. this indicates that there are one or more
defective injectors.
9. Remove the test equipment and replace the
bleed off pipes. Refer to (PIL 18-96).
4. 18 - Fuel and Exhaust System
18 - Injection
03 - Injector
18 - 62 9813/7600-3 18 - 62
Figure 392.
A
A
A
A
B
A Injectors (x4)
B HP valve
Remove and Install
The following procedure is for one injector, the
procedures are identical for all injectors.
Note: The original injector calibration codes are
located on a label on the rocker cover.
Before Removal
1. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
2. Get access to the engine.
3. Remove the high pressure fuel pipes. Refer to
Fuel Pipes (PIL 18-96).
4. Remove the fuel bleed off fuel pipes. Refer to
Fuel Pipes (PIL 18-96).
5. Remove the rocker cover, refer to (PIL 15-42).
6. Record which injector is for which cylinder. The
injectors must be installed in the same positions.
Note: If a fuel injector is defective, it must be
replaced.
Remove
1. Remove the injector clamp retaining bolt and lift
the clamp away.
5. 18 - Fuel and Exhaust System
18 - Injection
03 - Injector
18 - 63 9813/7600-3 18 - 63
Figure 393.
X 14
3
2
1 Injector
2 Injector clamp
3 Retaining bolt
4 Injector sleeve
X Injector bleed-off port
2. Remove and discard the sealing washer. Label
the injector to make sure it is installed in its
original cylinder. Put a clean protective cap over
the nozzle of the injector.
3. Remove and discard the O-ring.
Figure 394.
5
7
6
5 Protective cap
6 Protective cap
7 Sealing washer
Install
Important: The fuel injectors are not interchangeable
between cylinders or other engines. Make sure you
install the injectors in the same positions. If a new
or different injector is installed, the engine electronic
control unit (ECU) must be re-programmed. Refer to
(PIL 33-45), Engine Electronic Control Unit, Vehicle
Set Up Data.
When new or different injectors are installed, record
the calibration code. Record which cylinder the
injector is installed into. Refer to (PIL 33-45), Engine
Electronic Control Unit, Vehicle Set Up Data.
6. 18 - Fuel and Exhaust System
18 - Injection
03 - Injector
18 - 64 9813/7600-3 18 - 64
Figure 395.
B
A
C
D
A Correction factor (20 characters)
B Manufacturers reference
C JCB part number
D Injector serial number
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Clean off any sludge or oil from the inner bore
of the injector sleeve. Make sure you do not
damage the surface of the bore. Any damage
or surface contamination will cause the injector
sealing O-ring to fail.
3. Install a new O-ring.
4. Install a new sealing washer.
5. Make sure that the injector is installed in the
correct orientation, with the bleed-off port facing
the right hand side (exhaust manifold) of the
engine. Make sure the injector is pushed fully into
the cylinder head.
6. Tighten the injector clamp bolt to the correct
torque value.
After Installation
1. Replace the rocker cover, refer to (PIL 15-42).
2. Renew the high pressure fuel pipes, Refer to Fuel
Pipes (PIL 18-96).
3. Replace the low pressure fuel pipes, Refer to
Fuel Pipes (PIL 18-96).
4. Start the engine and check for fuel leaks.
Table 171. Torque Values
Item Nm
3 28
4 39
7. 18 - Fuel and Exhaust System
18 - Injection
07 - Injector Seal
18 - 65 9813/7600-3 18 - 65
07 - Injector Seal
Remove and Install
Special Tools
Description Part No. Qty.
Injector Seal
Installation Tool
(Electronic Engine)
892/12346 1
Injector Sleeve
Installation/Removal
Tool
892/12348 1
Before Removal
1. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
2. Clean the engine. Refer to Engine- Clean (PIL
15-00).
Figure 396.
B
A
C
D
A Rocker cover B Bolts
C Gasket D Injector seals
8. 18 - Fuel and Exhaust System
18 - Injection
07 - Injector Seal
18 - 66 9813/7600-3 18 - 66
Remove
1. Get access to the engine.
2. Remove the high pressure fuel pipes. Refer to
Fuel Pipes (PIL 18-96).
3. Remove the rocker cover from the cylinder head.
Refer to (PIL 15-42).
4. Put wooden supports under the rocker cover and
tap out the injector seals using the special tool.
Discard the seals.
Special Tool: Injector Seal Installation Tool
(Electronic Engine) (Qty.: 1)
Figure 397.
EF
G
E Injector seal installation tool
F Injector seals
G Wooden supports
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Remove all oil and sludge contamination from
inside the valve chamber.
3. Renew the injector seals. Put supports under the
rocker cover and tap in the new seals using the
special tool.
Special Tool: Injector Seal Installation Tool
(Electronic Engine) (Qty.: 1)
Figure 398.
E
F
G
E Injector seal installation tool
F Injector seals
G Wooden supports
4. Renew the rocker cover gasket.
5. Prevent damage to the seals. Put sleeves/covers
on the injectors. Apply a rubber lubricant to the
seals.
Special Tool: Injector Sleeve Installation/
Removal Tool (Qty.: 1)
6. Install the rocker cover. Refer to (PIL 15-42).
After Installation
1. The high pressure fuel pipes must be replaced
with new parts. Refer to Fuel Pipes (PIL 18-96).
2. Start the engine and check for oil and fuel leaks.
9. 18 - Fuel and Exhaust System
18 - Injection
12 - Rail
18 - 67 9813/7600-3 18 - 67
12 - Rail
Introduction .................................................... 18-67
Remove and Install ....................................... 18-68
Introduction
The fuel rail also known as a common rail, is a
pipe resembling a rail that is used to deliver fuel
to individual fuel injectors on internal combustion
engines. It is designed to have an outlet for each
injector, an inlet for a fuel supply and an outlet for a
fuel bleed off.
The fuel rail also incorporates an attached fuel
pressure sensor and a fuel valve. DO NOT
remove the high pressure fuel valve or the fuel
pressure sensor from the rail. If these components
are defective replace the complete common rail
assembly.
Figure 399.
A
D
C
E
B
F
A Fuel pressure sensor
B Outlet
C Bleed off
D High pressure fuel valve
E Inlet
F Rail assembly
10. 18 - Fuel and Exhaust System
18 - Injection
12 - Rail
18 - 68 9813/7600-3 18 - 68
Remove and Install
Before Removal
1. Obey all fuel system health and safety
information. Refer to (PIL 18-00).
2. Make sure that the engine is safe to work on. The
engine must cool and pressure in the fuel system
must decay before you start work. If the engine
has been running, wait at least one hour before
you start work.
3. Clean the engine. Refer to Engine-Clean (PIL
15-00).
4. Remove the high pressure fuel pipes. Refer to
Fuel Pipes (high pressure) - Remove and Install
(PIL 18-96).
5. Remove the fuel bleed off pipe at the rail. Refer to
Fuel Pipes (low pressure) - Remove and Install
(PIL 18-96).
Remove
1. Disconnect the electrical connector at the high
pressure fuel valve.
2. Disconnect the electrical connector at the fuel
pressure sensor.
3. Remove the bolts and lift off the common rail
assembly.
Seal the common rail assembly inside a clean plastic
bag until it is ready for use. If the assembly is
defective discard it and get a new one.
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Tighten the bolts to the correct torque value.
When renewing the rail assembly make sure to
replace all of the high pressure fuel pipes. Refer to
(PIL 18-96).
Figure 400.
A
D
C
B
FE
E
A Fuel pressure sensor
B High pressure fuel pipe
C Fuel bleed off pipe
D High pressure fuel valve
E Bolts
F Rail assembly
Table 172. Torque Values
Item Nm
C 24
11. 18 - Fuel and Exhaust System
18 - Injection
15 - Pump
18 - 70 9813/7600-3 18 - 70
Component Identification
Figure 401.
12
7
1
8 2 10
3
9
13
4 2
5
6
11
1 Fuel injection pump
2 Pump fixing nuts (x3)
3 Injection pump gear cover
4 Inlet metering valve electrical connector
5 Fuel temperature sensor electrical connector
6 Fuel pipe connector (inlet)
7 Fuel bleed-off connector
8 Fuel bleed-off connector, injector bleed off
9 Drive shaft nut
10 Drive gear
11 Injection pump O-ring oil seal
12 High pressure fuel outlet port
13 Gear cover O-ring oil seal
Operation
The high pressure fuel injection pump is driven via a
gear on the engine and rotates at half engine speed.
The pump comprises of two sections, the transfer
pump and the high pressure pump.
Although the pump does not control fuel injection
timing, it is still timed in relation to engine phasing.
By timing the pump pressure pulses, the load on the
engine timing gears is reduced together with reduced
mechanical noise.
Transfer Pump Operation
The integral transfer pump is a vane type. An
engine driven rotor houses four vanes in slots.
The rotor rotates inside an eccentric liner. The
vanes are held in contact with the liner by springs.
Fuel is drawn into the pump chamber at port X,
pressurised by the decreasing volume inside the
chamber and expelled at port Y. Fuel pressure
generated by the transfer pump is limited to a
specified pressure by an integral pressure regulating
valve. This pressure is maintained regardless of
engine speed.6bar (87.0psi)
Figure 402.
A
D
C
B
X Y
E
A Rotor
B Vanes (x4)
C Eccentric liner
D Springs
E Regulating valve
X Port X
Y Port Y
High Pressure Pump Operation
Fuel passes to the high pressure pump via the IMV
(Inlet Metering Valve). The ECM (Engine Control
12. 18 - Fuel and Exhaust System
18 - Injection
15 - Pump
18 - 71 9813/7600-3 18 - 71
Module) controlled IMV determines the amount of
fuel transferred to the high pressure pump. The
plunger actuator block is located on the engine driven
eccentric shaft. When the shaft rotates the actuator
block operates the two plungers. As one plunger is
pushed up its chamber the other is pushed down by
its spring.
State 1 - Charging
Note: The description is for one plunger. The
opposite plunger operates in an identical way. The
inlet and delivery ports from each plunger are
connected by internal galleries.
When the eccentric shaft is in the position shown
force from spring moves the plunger down its
chamber. Pressure in the chamber falls below the
rail pressure and the delivery valve closes. Transfer
pressure is now sufficient to force inlet valve off its
seat and allow the fuel to fill the chamber.
Figure 403.
A
B
E
C
F
D
A Eccentric shaft
B Actuator block
C Plunger
D Inlet valve
E Delivery valve
F Spring
State 2 - Pumping
Note: The description is for one plunger. The
opposite plunger operates in an identical way. The
inlet and delivery ports from each plunger are
connected by internal galleries.
When the eccentric shaft is in the position shown the
actuator block moves the plunger up its chamber.
Fuel pressure in the chamber rises and forces the
inlet valve on to its seat. As the plunger is pushed
further up its chamber the fuel pressure exceeds that
of the rail pressure and the delivery valve is forced off
its seat. Fuel is forced into the rail at high pressure.
Figure 404.
A
B
E
C
D
A Eccentric shaft
B Actuator block
C Plunger
D Inlet valve
E Delivery valve
13. 18 - Fuel and Exhaust System
18 - Injection
15 - Pump
18 - 72 9813/7600-3 18 - 72
Remove and Install
Special Tools
Description Part No. Qty.
Crankshaft Turning Tool
(95.25mm PCD)- JCB
4 Cylinder Ecomax and
Dieselmax
892/01147 1
Crankshaft /
Camshaft Timing Pin
(444/448/672 Engine)
892/01148 1
Tamper proof Cover
Removal Tool
892/01154 1
Pump Gear Removal
Tool
892/01155 1
C-Shaped Ring
Spanner
892/01179 1
Torque Wrench
(10-100Nm)
993/70111 1
Important: The following procedures include removal
and replacement of fuel system components. Before
starting the procedures the engine assembly must be
cleaned. Clean the engine. Refer to Engine- Clean
(PIL 15-00).
Important: Service procedures on the high pressure
fuel pump can only be carried out by specialist
personnel with the relevant training and equipment.
Before Removal
1. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
2. Get access to the engine.
3. Remove the high pressure fuel pipe at port 12,
refer to Fuel Pipes- Remove and Install. Cap all
open ports and pipes, refer to (PIL 18-96).
4. To improve access to the pump, remove the fuel
filter, refer to (PIL 18-09).
Important: When removing components dirt and
debris may become exposed or dislodged. Stop the
removal procedures and clean away the exposed
deposits. Refer to Engine- Clean (PIL 15-00).
Figure 405.
12
7
1
8 2 10
3
9
13
4 2
5
6
11
1 Fuel injection pump
2 Pump fixing nuts (x3)
3 Injection pump gear cover
4 IMV (Inlet Metering Valve) electrical connector
5 Fuel temperature sensor electrical connector
6 Fuel pipe connector (inlet)
7 Fuel bleed-off connector
8 Fuel bleed-off connector, injector bleed off
9 Drive shaft nut
10 Drive gear
11 Injection pump O-ring oil seal
12 High pressure fuel outlet port
13 Gear cover O-ring oil seal
Remove
1. Release the fuel pipe couplings at the inlet
connection 6 and bleed-off connections 7 and 8
on the pump. Cap all open ports and pipes.
2. Uncouple the electrical connectors at the IMV
and the fuel temperature sensor.
3. Remove the bedplate plug.
14. 18 - Fuel and Exhaust System
18 - Injection
15 - Pump
18 - 73 9813/7600-3 18 - 73
Figure 406.
A
C
1
1 Bedplate plug
A Crankshaft / Camshaft timing pin
C Crankshaft turning tool
4. Use the crankshaft turning tool to turn the
crankshaft until the timing pin engages in the
crankshaft timing hole.
Special Tool: Crankshaft Turning Tool (95.25mm
PCD)- JCB 4 Cylinder Ecomax and Dieselmax
(Qty.: 1)
Special Tool: Crankshaft / Camshaft Timing Pin
(444/448/672 Engine) (Qty.: 1)
5. Use the gear removal tool and a suitable ratchet
drive to remove the fuel injection pump gear
cover.
Special Tool: Pump Gear Removal Tool (Qty.: 1)
6. Remove the drive shaft nut.
Figure 407.
B
3
11
F G
H
E
3 Gear cover
11 Drive shaft nut
B Gear removal tool
E Pump gear removal tool, comprises:
F Pump gear removal tool (Reaction cap)
G Pump gear removal tool (Body)
H Pump gear removal tool (Bolt)
7. Remove the nuts. Use the special C shaped
ring spanner to remove the nut closest to the
crankcase. Make sure you remove all nuts (X3).
8. Install the reaction cap over the pump shaft.
Screw the body to the housing. Use a suitable
ratchet drive and socket to screw the bolt in until
you feel a slight resistance.
Special Tool: C-Shaped Ring Spanner (Qty.: 1)
Special Tool: Pump Gear Removal Tool (Qty.: 1)
15. 18 - Fuel and Exhaust System
18 - Injection
15 - Pump
18 - 74 9813/7600-3 18 - 74
Figure 408.
2
H
G
F
10
2 Fixing nuts
10 Injection pump drive gear
F Pump gear removal tool (Reaction cap)
G Pump gear removal tool (Body)
H Pump gear removal tool (Bolt)
9. The injection pump drive gear is located on a
taper on the pump drive shaft. To remove the
pump the taper lock must be broken. Support
the fuel pump. Tap the end of the bolt H with a
soft faced hammer. When the taper breaks there
will be an audible sound. Note: The pump drive
gear connects to the injection pump drive shaft by
means of taper lock alone, there is no mechanical
locking key.
10. Remove the service tools. Withdraw the pump
from the flywheel housing.
Install
1. Make sure that the taper surfaces on the injection
pump drive shaft and gear are clean and free
from oil and damage.
Figure 409.
9
2
2 12
10
2 Fixing nuts
9 Gear pump nut
10 Drive gear
12 Drive shaft
2. Make sure that the oil seal is correctly located on
the pump mounting face.
Figure 410.
16
16 Oil seal
3. Locate the pump on to the mounting studs.
Locate the drive gear over the pump drive shaft.
4. Install the fixing nuts and tighten to the correct
torque value.
5. Install the gear pump nut and tighten to the
correct torque value. Note: If a washer is supplied
with a replacement pump, Do not install the
washer. Secure the gear with the gear pump nut
only.
6. Use the tamperproof cover removal tool to install
the gear cover. Make sure its sealing O-ring is
correctly installed. Tighten the gear cover to the
correct torque value.
Special Tool: Torque Wrench (10-100Nm) (Qty.:
1)
Special Tool: Tamper proof Cover Removal Tool
(Qty.: 1)
16. 18 - Fuel and Exhaust System
18 - Injection
15 - Pump
18 - 75 9813/7600-3 18 - 75
Figure 411.
B
3
3 Gear cover
B Tamperproof cover removal tool
After Installation
1. Remove the crankshaft turning tool.
2. Remove the crankshaft timing pin and install the
bedplate plug.
3. Reconnect the fuel pipe couplings at the inlet
connection, reconnect the bleed-off connections
on the pump.
4. Install a new high pressure fuel pipe, remove
the protective caps from the ports, refer to Fuel
Pipes- Remove and Install, refer to (PIL 18-96).
5. Connect the electrical connectors at the IMV and
the fuel temperature sensor.
6. Replace the fuel filter, refer to (PIL 18-09).
7. Start the engine and check for fuel leaks.
Figure 412.
12
7 8
4
5
6
4 IMV electrical connector
5 Fuel temperature sensor electrical connector
6 Fuel pipe connector (inlet)
7 Fuel pump bleed-off connection
8 Fuel pump bleed-off connection
12 High pressure fuel outlet port
Table 173. Torque Values
Item Nm
2 24
3 70
9 65
17. 18 - Fuel and Exhaust System
18 - Injection
27 - High Pressure Rail Valve
18 - 76 9813/7600-3 18 - 76
27 - High Pressure Rail Valve
Introduction .................................................... 18-76
Operation ....................................................... 18-77
Check (Operation) ......................................... 18-77
Remove and Install ....................................... 18-78
Introduction
The HPV (High Pressure Valve) is an integral part
of the common fuel rail assembly, If the valve
is defective replace the complete common rail
assembly. (Refer to PIL 18-18).
Figure 413. High pressure valve location
Figure 414.
A
B
A HPV
B Solenoid coil
18. 18 - Fuel and Exhaust System
18 - Injection
27 - High Pressure Rail Valve
18 - 77 9813/7600-3 18 - 77
Operation
In certain operating conditions, the HPV (High
Pressure Valve) controls the fuel pressure inside the
common rail.
When the valve opens, fuel is bled from the rail back
to the fuel tank, reducing the fuel pressure inside the
fuel rail. The valve is actuated by a solenoid coil and
features proportional control. The fuel flow through
the valve is proportional to the current supplied to
the coil. The current value is controlled by the ECM
(Engine Control Module) using PWM (Pulse Width
Modulation).
During normal engine operation, the fuel pressure is
controlled solely by the IMV (Inlet Metering Valve),
refer to (PIL 18-18).
In some operating circumstances, the IMV is unable
to alter the fuel pressure in the common rail quickly
enough. At these times, the ECM activates the HPV.
Typically the valve is used in the following conditions:
• Extreme transients, for example if the operator
goes from full throttle to no throttle quickly.
• When the fuel is cold.
In the event of an IMV failure, the ECM compensates
by altering the control of the HPV to ensure the
engine performance is sufficient to limp home.
Check (Operation)
For the full inspection and testing procedure, refer to
the help files in ServiceMaster.
19. 18 - Fuel and Exhaust System
18 - Injection
27 - High Pressure Rail Valve
18 - 78 9813/7600-3 18 - 78
Remove and Install
This part is a non-serviceable component, if it
is defective, replace the complete common rail
assembly. Refer to: PIL 18-18-12.
20. 18 - Fuel and Exhaust System
24 - Exhaust
03 - Inlet Manifold
18 - 90 9813/7600-3 18 - 90
Component Identification
Figure 418.
1
1 Inlet Manifold
Check (Condition)
1. Check the manifold mating faces for signs of
damage and distortion.
2. Check the manifold casting for signs of cracks.
3. Renew the manifold if there are any signs of
defect.
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. 18 - Fuel and Exhaust System
24 - Exhaust
03 - Inlet Manifold
18 - 91 9813/7600-3 18 - 91
Remove and Install
Before Removal
1. This procedure requires service parts. Make
sure you have obtained the correct service parts
before you start, refer to Parts Catalogue.
2. Make sure that the engine is safe to work on. If
the engine has been running, let it cool before
you start the service work.
3. Get access to the engine.
4. Remove the fuel rail assembly. Refer to (PIL
18-18).
Figure 419.
2
3
3
4
5
12
8
9
11 10
6
7
13
1
1 Inlet manifold 2 Manifold gasket
3 Flanged hexagon bolt (x8) 4 Fuel rail mount
5 Screw (x4) 6 EGR (Exhaust Gas Recirculation) mixer tube
7 EGR Plug 8 Inlet manifold adaptor / throttle valve (not
shown)
9 Throttle O-ring 10 Flanged hexagon bolt (x4)
11 Inlet manifold bracket 12 Bolt M6 x 16mm (x1)
13 Bolt M8 x 25mm (x1)
Remove
1. Disconnect the TMAP (Temperature Manifold Air
Pressure) sensor electrical connector.
2. Disconnect the air inlet hose.
3. Remove the bolts 3 and lift the inlet manifold from
the cylinder head. Discard the gasket.
4. Cap the inlet ports with blanking caps to prevent
ingress of dirt.
5. Inspect the manifold, refer to Check Condition
(PIL 18-24).
23. 18 - Fuel and Exhaust System
24 - Exhaust
03 - Inlet Manifold
18 - 92 9813/7600-3 18 - 92
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
steps.
2. Renew the manifold gasket.
3. Loosely assemble the manifold, together with the
new inlet gasket to the cylinder head, use the two
bolts (one at each end).
4. With the manifold and gasket in position, install
the remaining six bolts.
5. Tighten the bolts to the correct torque value.
Table 177. Torque Values
Item Nm
3 43
24. 18 - Fuel and Exhaust System
24 - Exhaust
04 - Outlet Manifold
18 - 93 9813/7600-3 18 - 93
04 - Outlet Manifold
Introduction .................................................... 18-93
Component Identification ............................... 18-94
Check (Condition) .......................................... 18-94
Remove and Install ....................................... 18-95
Introduction
For: JCB T4F 4.4 over 55kw Electronic
Dieselmax Turbocharged Aftercooled
Engine, JCB Tier 4F Engine 4 Cyl, JCB Tier
4i /T4F <55kW Engine 4 Cyl ...... Page 18-93
Otherwise .................................. Page 18-93
(For: JCB T4F 4.4 over 55kw Electronic
Dieselmax Turbocharged Aftercooled
Engine, JCB Tier 4F Engine 4 Cyl, JCB
Tier 4i /T4F <55kW Engine 4 Cyl)
Figure 420.
A B
A Exhaust manifold
B Manifold gasket and heat shield
(Otherwise)
The exhaust outlet manifold collects the exhaust
gases from the multiple cylinders and delivers it to
the turbocharger or the exhaust pipe.