The slide that explains how to make circuits that connected to Raspberry PI GPIO and several sensors.
This slides show how to program using Python language.
강의할 기회가 없어지는 아쉬움에 강의시 사용한 라즈베리파이 강의 자료를 업로드 합니다.
SBC 인 Raspberry Pi 에 OS 설치, 원격 개발 환경 구성 및 개발 환경까지 완료 할 수 있고 기본 전기전자 소자와 GPIO Header pin을 통한 연결까지 다룹니다.
Softbox Raspberry pi education kit development environment setting
이글은 라즈베리 파이에 입문하여 처음 사용하려는 사용자를 위해 작성하였다.
보통 개발을 하든, 무엇인가 하려고 할때 환경을 구축하는것은 까다롭고 힘든 일이다. 그 과정이 단순하고, 쉬울 경우 작업 속도와 성과는 잘 나올 수 있다. 처음 라즈베리 파이를 구입하여 개발환경을 구축하기까지 약간은 번거롭고 힘이 든 과정을 알기 쉽게 설명하려 한다. 문의사항이나 잘 안되는 것은 언제든 답글에 남겨주기 바란다. This article was written for users who want to start using raspberry pi.
It is difficult and difficult to build an environment when you are usually developing or trying to do something. If the process is simple and easy, the speed and performance of the work can be good. I will try to explain the process of purchasing raspberry pie for the first time and building a development environment. If you have any questions or comments, please leave them in a reply.
http://www.oss.kr/index.php?mid=oss_information6&category=1371&document_srl=1392
제 1회 공개SW역량프라자 정기기술세미나(6월24일) 발표자료를 올립니다.
세션1 : 리눅스 시스템을 위한 성능 분석
(강사) 국민대학교 이남승 연구원
세션2 : 우분투 환경에서의 임베디드 개발환경 구축 및 애플리케이션 개발
(강사)우분투코리아 강분도 대표
아젠텍 이호민 전임연구원
다음회차에는 더 좋은 주제로 찾아뵙겠습니다.
감사합니다.
오픈소스 모니터링 알아보기(Learn about opensource monitoring)SeungYong Baek
오픈소스 모니터링 알아보기
Learn about opensource monitoring
Grafana, Prometheus, Graphite
넷앱 스토리지 성능 모니터링
NetApp storage performance monitoring with grafana and graphite
ONTAP performance monitoring with grafana and graphite
The slide that explains how to make circuits that connected to Raspberry PI GPIO and several sensors.
This slides show how to program using Python language.
강의할 기회가 없어지는 아쉬움에 강의시 사용한 라즈베리파이 강의 자료를 업로드 합니다.
SBC 인 Raspberry Pi 에 OS 설치, 원격 개발 환경 구성 및 개발 환경까지 완료 할 수 있고 기본 전기전자 소자와 GPIO Header pin을 통한 연결까지 다룹니다.
Softbox Raspberry pi education kit development environment setting
이글은 라즈베리 파이에 입문하여 처음 사용하려는 사용자를 위해 작성하였다.
보통 개발을 하든, 무엇인가 하려고 할때 환경을 구축하는것은 까다롭고 힘든 일이다. 그 과정이 단순하고, 쉬울 경우 작업 속도와 성과는 잘 나올 수 있다. 처음 라즈베리 파이를 구입하여 개발환경을 구축하기까지 약간은 번거롭고 힘이 든 과정을 알기 쉽게 설명하려 한다. 문의사항이나 잘 안되는 것은 언제든 답글에 남겨주기 바란다. This article was written for users who want to start using raspberry pi.
It is difficult and difficult to build an environment when you are usually developing or trying to do something. If the process is simple and easy, the speed and performance of the work can be good. I will try to explain the process of purchasing raspberry pie for the first time and building a development environment. If you have any questions or comments, please leave them in a reply.
http://www.oss.kr/index.php?mid=oss_information6&category=1371&document_srl=1392
제 1회 공개SW역량프라자 정기기술세미나(6월24일) 발표자료를 올립니다.
세션1 : 리눅스 시스템을 위한 성능 분석
(강사) 국민대학교 이남승 연구원
세션2 : 우분투 환경에서의 임베디드 개발환경 구축 및 애플리케이션 개발
(강사)우분투코리아 강분도 대표
아젠텍 이호민 전임연구원
다음회차에는 더 좋은 주제로 찾아뵙겠습니다.
감사합니다.
오픈소스 모니터링 알아보기(Learn about opensource monitoring)SeungYong Baek
오픈소스 모니터링 알아보기
Learn about opensource monitoring
Grafana, Prometheus, Graphite
넷앱 스토리지 성능 모니터링
NetApp storage performance monitoring with grafana and graphite
ONTAP performance monitoring with grafana and graphite
2. Driver 설치
• 설치
pi@raspberrypi ~ $ sudo -s
pi@raspberrypi ~ # apt-get update
pi@raspberrypi ~ # apt-get upgrade
pi@raspberrypi ~ # rpi-update
pi@raspberrypi ~ # cd /usr/src
pi@raspberrypi ~ # git clone https://github.com/raspberrypi/linux.git
pi@raspberrypi ~ # ln -s /usr/src/linux /lib/modules/`uname -r`/build
pi@raspberrypi ~ # cd linux
pi@raspberrypi ~ # make mrproper
pi@raspberrypi ~ # zcat /proc/config.gz > .config
pi@raspberrypi ~ # cp .config .config.org
pi@raspberrypi ~ # make modules_prepare
pi@raspberrypi ~ # wget https://raw.github.com/raspberrypi/firmware/master/extra/Module.symvers
pi@raspberrypi ~ # cd ~
pi@raspberrypi ~ # wget http://groenholdt.net/Computers/RaspberryPi/MediaTek-MT7601-USB-WIFI-on-
the-Raspberry-Pi/DPO_MT7601U_LinuxSTA_3.0.0.4_20130913.tar.bz2
pi@raspberrypi ~ # tar -xvjpf DPO_MT7601U_LinuxSTA_3.0.0.4_20130913.tar.bz2
pi@raspberrypi ~ # cd DPO*
3. 기존 드라이버 비활성화
• os/linux/rt_linux.c 수정
pi@raspberrypi ~ # nano os/linux/rt_linux.c
rt_linux.c 에서 아래의 내용을 찾은 후
ULONG RTDebugLevel = RT_DEBUG_TRACE;
아래와 같이 바꿔준다
ULONG RTDebugLevel = 0; // RT_DEBUG_TRACE;
4. Driver 설치
• 설치
pi@raspberrypi ~ # cd ~
pi@raspberrypi ~ # cd DPO*
pi@raspberrypi ~ # make
pi@raspberrypi ~ # make install
5. 라즈비안 설정
• 설정
pi@raspberrypi ~ # nano /etc/network/interfaces
글 맨 아래에 다음 내용을 추가
auto ra0
allow-hotplug ra0
iface ra0 inet dhcp
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
iface default inet dhcp
• 접속할 ap설정
pi@raspberrypi ~ # nano /etc/wpa_supplicant/wpa_supplicant.conf
다음과 같이 작성한다. “ “ 사이에는 공유기 이름과 비밀번호를 해당하는 줄에 각각 입력한다.
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
ssid="YOURWIFINAME“ ex) Y
key_mgmt=WPA-PSK
psk="YOURPASSWORD“ ex) 12345678abcd
}
저장한다.
pi@raspberrypi ~ # ifup ra0
입력후 재부팅 연결이 제대로 되는지 ifconfig를 쳐서 ra0에 아이피가 잡혔는지 확인한다.