The document provides instructions for installing and activating Autodesk Autocad Civil 3D 2012 using a serial number and product key, along with options to disable the online serial check or use a keygen to generate an activation code. It notes the user should run the keygen as administrator with UAC off on Windows Vista or 7, and have up-to-date DX and .NET Framework.

1. 1.Install Autodesk Autocad Civil 3D 2012
2.Use as Serial 666-69696969, 667-98989898, 400-45454545 .. or anything matching
those templates
3.Use as Product Key 237D1
4.Finish the installation & restart Autodesk Product
5.Before clicking on Activate
You have 2 options :
- a) Disable Your network Card, pull the network cable out or block with
firewall
(this is just to disable online serial check)
OR
- b) Click on Activate and it will tell you that your serial is wrong, simply
click
on close et click on activate again.
Choose option a or b.
6. Select I have an activation code from Autodesk
7.Once at the activation screen:
start Keygen 32bits version if you are installing a 32bits application and
64bits if you are installing a 64bits application.
8.Click on Mem Patch (you should see successfully patched)
9.Copy the request code into the keygen and press generate
10.Now copy the activation code back to the activation screen and click Next
You have a fully registered autodesk product
NB:
1.Make sure you are running the Keygen as administrator and with UAC off on
Vista or Windows7
but you have to anyway to install Adesk products.
2.You need DX and Net Framework up to date