The document provides specifications for various window and door models from Integrity, including their dimensions and sizes. It lists measurements such as width, height, and clear opening area for double hung windows, egress windows, and outswing french doors ranging from smaller to larger sizes. Contact information is provided at the bottom for the Integrity dealer or website for more information.
2. The natural choice
for nature’s best.
Coastal homes have a reputation for severe weather. The location that gives you
fantastic views also magnifies the elements such as severe temperatures, sun, salt
and wind day in and day out, wearing down your home’s exterior faster. Impact
products from Integrity Windows and Doors sustain the structural quality of your
home because of Ultrex®
, a pultruded fiberglass material that is builttoperform.
Ultrex outlasts the competition under normal conditions, but on the coast it leaves
them in the dust. Other materials can corrode and vinyl can distort, crack and
fade in just a handful of years, but durable low-maintenance Ultrex weathers the
harsh coastal conditions and looks fantastic in the sun.
IntegrityIMPACTCasementOperator/Stationary
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.37 2.70 50 0.30 0.50 NC,SC,S
LowEII-Argon 0.32 3.13 54 0.30 0.50 N,NC,SC,S
LowEII-Air-SDL 0.37 2.70 50 0.27 0.45 NC,SC,S
LowEII-Argon-SDL 0.32 3.13 54 0.27 0.45 N,NC,SC,S
THERMAL PERFORMANCE
DESIGN PRESSURE ratings
A design pressure rating, as defined by AAMA/WDMA/CSA 101/
I.S.2/A440-05, 101/I.S.2/NAFS-02, and ANSI/AAMA/NWWDA
101/I.S.2-97, is an indication of the amount of wind load an individual
window or door is intended to withstand when closed and locked.
Please consult your local Integrity®
fromMarvinrepresentative
for more information.
Integrity products have gone through HUD’s materials release
process (Form No. 1280) which allows them to qualify under the
WDMA Hallmark Certification Program for compliance with HUD
use of materials bulletin requirements (Form No. 59b).
Casement Windows DP+55/-65
Casement Picture DP+55/-65
Awning Windows DP+55/-65
Double Hung Windows DP+55/-65
Direct Glazed Windows DP+55/-65
OutswingFrenchDoors
X and O Doors DP+55/-65
XX Doors DP+55/-55
wind/impact zones
IMPACT products from Integrity are impact certified as defined
by ASTM E1996-02, ASTM E1996-05 and ASTM E1996-06,
and built to withstand winds up to 140 mph. They are rated for
the IZ3 area, but also exceed codes for IZ2 areas:
The only area IMPACT products have not been rated for is IZ4
which includes the Dade County area of Florida.
impact zone 2
• Sustainswindsfrom120mph
upto129mph
• Designpressuresapproach
50psffornegativeloads
• Standsuptowind-bornedebris
test;4'long2x4studshot
at40'persecond
• Testedagainst4500positive
and4500negativepressurecycles
impact zone 3
• Sustainswindsfrom120mph
upto140mph
• Designpressuresapproach
65psffornegativeloads
• Standsuptowind-bornedebris
test;8'long2x4studshot
at50'persecond
• Testedagainst4500positive
and4500negativepressurecycles
IntegrityIMPACTAwningOperator/Stationary
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.37 2.70 49 0.30 0.50 NC,SC,S
LowEII-Argon 0.32 3.13 54 0.30 0.50 N,NC,SC,S
LowEII-Air-SDL 0.37 2.70 49 0.27 0.45 NC,SC,S
LowEII-Argon-SDL 0.32 3.13 54 0.27 0.45 N,NC,SC,S
26
IntegrityIMPACTDoubleHung
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.38 2.63 48 0.32 0.53 NC,SC,S
LowEII-Argon 0.33 3.03 51 0.31 0.53 N,NC,SC,S
LowEII-Air-SDL 0.38 2.63 48 0.28 0.47 NC,SC,S
LowEII-Argon-SDL 0.33 3.03 51 0.28 0.47 N,NC,SC,S
IntegrityIMPACTDirectGlazeTransom/Polygon
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.30 3.33 56 0.34 0.59 N,NC,SC,S
LowEII-Argon 0.27 3.70 59 0.34 0.59 N,NC,SC,S
LowEII-Air-SDL 0.30 3.33 56 0.31 0.53 N,NC,SC,S
LowEII-Argon-SDL 0.27 3.70 59 0.31 0.53 N,NC,SC,S
IntegrityIMPACTDoubleHungPicture
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.37 2.70 49 0.33 0.55 NC,SC,S
LowEII-Argon 0.32 3.13 53 0.33 0.55 N,NC,SC,S
LowEII-Air-SDL 0.37 2.70 49 0.30 0.49 NC,SC,S
LowEII-Argon-SDL 0.32 3.13 53 0.29 0.49 N,NC,SC,S
IntegrityIMPACTOutswingFrenchDoor
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.37 2.70 53 0.28 0.46 NC,SC,S
LowEII-Argon 0.33 3.03 58 0.27 0.46 N,NC,SC,S
LowEII-Air-SDL 0.37 2.70 53 0.24 0.39 N,NC,SC,S
LowEII-Argon-SDL 0.33 3.03 58 0.24 0.39 NC,SC,S
IntegrityIMPACTCasementPicture
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.36 2.78 50 0.34 0.57 NC,SC,S
LowEII-Argon 0.31 3.23 54 0.34 0.57 N,NC,SC,S
LowEII-Air-SDL 0.36 2.78 50 0.31 0.51 NC,SC,S
LowEII-Argon-SDL 0.31 3.23 54 0.30 0.51 N,NC,SC,S
IMPACTPRODUCTS
FROM INTEGRITY
WARRANTY
This limited warranty is extended to all end users of Integrity®
Windows and Doors. Your Integrity products are warranted to be free from defects
in manufacturing, materials and workmanship. If such a defect appears during the term of this warranty, Integrity will, at its option (1) repair the defective
product, (2) replace the defective materials or (3) refund your purchase price. If replacement is elected, Integrity will not be responsible for installation
or refinishing of replacement parts.
This limited warranty is valid for ten (10) years from the date your Integrity product was originally purchased and is subject to the further Conditions
and Exclusions set forth below. The warranty of replacement products (including upgrades thereto) furnished pursuant to this warranty will be limited
to the remainder of the warranty period of the original product.
Twenty(20)YearInsulatingGlassLimitedWarranty
The insulating glass in your Integrity products is warranted against visible obstruction thru the glass caused by a failure of the insulating glass air seal
for a period of twenty (20) years from the date of original purchase. In the event visible obstruction occurs within the twenty (20) years, Integrity will,
at its option, provide replacement insulating glass with or without associated sash. Integrity will not be responsible for installation or refinishing of these
replacement parts.*
*Stress cracks are warranted against manufacturing defects for 10 years from original purchase date.
CLAIMS UNDER THESE WARRANTIES MUST BE MADE WITHIN 60 DAYS OF THE APPEARANCE OF A DEFECT.
ConditionsandExclusions
Integrity builds its windows and doors to be durable and long lasting. There are certain conditions or applications, however, over which Integrity has
no control. Defects or problems as a result of such conditions or applications are not the responsibility of Integrity and are not covered by this warranty.
They include:
YOUR EXCLUSIVE REMEDY WITH RESPECT TO ANY AND ALL LOSSES OR DAMAGES RESULTING FROM ANY CAUSE
WHATSOEVER SHALL BE AS SPECIFIED ABOVE. WE SHALL IN NO EVENT BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES OF ANY KIND, HOWEVER OCCASIONED, WHETHER BY NEGLIGENCE OR OTHERWISE. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES EXPRESS OR IMPLIED, AND NO PERSON (INCLUDING ANY AGENT, EMPLOYEE, DEALER, DISTRIBUTOR OR OTHER
REPRESENTATIVE) IS AUTHORIZED TO MAKE ANY OTHER REPRESENTATION OR WARRANTY CONCERNING THIS PRODUCT.
THIS WARRANTY IS NOT A WARRANTY OF FUTURE PERFORMANCE BUT ONLY A WARRANTY TO REPAIR/REPLACE OR REFUND.
IfYouHaveaWarrantyClaim
Your local Integrity distributor and dealer is equipped to handle your warranty claim quickly and efficiently. Because they are located near you, and
familiar with your purchase and/or project, your local Integrity dealer or distributor can best expedite the solution to your claim. If you have a warranty
claim with your Integrity window or door, call the dealer or distributor from whom the products were purchased. If you don’t know the name of the
dealer or distributor, call 1-800-346-5128 to locate the one nearest you. If, after 5 days, your local Integrity dealer or distributor has not responded
to your complaint, send a written complaint to Marvin Windows and Doors, P.O. Box 100, Warroad, Minnesota 56763, Attn: Warranty Department.
Include the following information in your letter: date you purchased your product; the dealer or distributor from whom your product was purchased;
description of product; specific definition of problem or defect; action that you’ve taken or contacts you’ve made with your local dealer or distributor;
and your name, address and phone number. Once we’ve received your letter, we’ll respond to your claim within 2 working days.
1/04
TenYearLimitedWarranty
• THIS LIMITED WARRANTY DOES NOT APPLY TO INTEGRITY
WINDOWS AND DOORS INSTALLED IN STRUCTURES THAT
DO NOT ALLOW FOR PROPER MANAGEMENT/ DRAINAGE
OF MOISTURE. FOR EXAMPLE, EXTERIOR INSULATION
AND FINISH SYSTEMS (“EIFS”), ALSO KNOWN AS
“SYNTHETIC STUCCO,” WITHOUT AN ENGINEERED
DRAINAGE SYSTEM.
• Improper installation, field finishing or maintenance.
• Any misuse, modification or alteration.
• Application of paint to any Integrity factory prefinish.
• Corrosion, wear or failure of hardware in seacoast applications.
• Normal wear or discoloration of finishes, including the tarnishing of brass.
• Variations in the color and grain of natural wood parts.
• Environmental conditions or use exceeding design standards.
• Warpage of 1/4 (6) or less of door stiles and rails.
• Minor glass imperfections that do not affect normal vision or product
performance, including curvature of glass due to atmospheric conditions.
• Condensation or frost on exposed surfaces of your Integrity windows
or doors. Condensation or frost is not a defect in the product, but a result
of excessive humidity. For more information about condensation and what
you can do to keep it to a minimum, write to:
Marvin Windows and Doors, P.O. Box 100, Warroad, Minnesota 56763.
27
4. 2
Coastal homes are some of the most aesthetically beautiful properties in the country, and the strongest—they have to be.
IMPACT products from Integrity Windows and Doors offer the designs that fit your vision with the performance that stands
up to severe weather conditions including hurricanes. High winds can cause flying debris that can penetrate typical glass.
IMPACT windows and doors are engineered to resist impact and meet the required building and regulatory codes
for virtually all coastal areas. The exterior is Ultrex®
, a pultruded fiberglass material that outperforms vinyl, vinyl clad,
and roll form aluminum. While all this technology works for you behind the scenes, you’ll only see the carefully selected
and handcrafted wood interior that is within every IMPACT product.
Make it IMPACT.
Make it last.
IMPACTPRODUCTS
FROM INTEGRITY
POLYVINYLBUTYRAL(PVB)or
DUPONT™ SENTRYGLAS®
PLUS(SGP)INTERLAYER
energyefficient
airspaceframed
by metalspacerbar
glass
IMPACT ZONE THREE
+ ProductsmeetInternationalBuildingCodesformany
EastCoastStates,fromRhodeIslandtoFloridatoTexas
+ Designpressuresapproach65psffornegativeloads
+ Standsuptowind-bornedebristest
8'long2x4studshotat50'persecond
+ Extensive+/-pressuretesting(9000cycles)
+ Sustainswindsupto140mph
FormoreinformationonDesignPressure
RatingsandWind/ImpactZonesseepage26.
6. 4
The Ultrex®
Advantage.
Stay ahead of the weather.
IMPACT products from Integrity offer the highest level of
performance because they’re made of Ultrex—a pultruded
fiberglass material with a patented coating process that is weather
resistant, strong, energy-efficient, stable, and long-lasting.
Under normal conditions vinyl can spot, streak or crack; and other materials can
corrode—just imagine what will happen under severe coastal conditions. Don’t even
think about painting vinyl to mask the problem, it will just make it worse by becoming
brittle; whereas Ultrex stays true, looks beautiful and performs flawlessly. Available in
several impermeable factory finish colors, Ultrex looks great with all styles of homes.
The only coastal window and door material that can stand up to life on the coast—Ultrex.
IMPACTPRODUCTS
FROM INTEGRITY
Coastalconditionsmagnifytheeffectsofthe
weatheronyourhome.Whileotherproducts
scratchfromuse,distortfromheatandfadeover
time;ImpactproductswithUltrexwilllook
beautifulandofferamazingperformance.
+ UVresistantfinishestowithstandthesun
+ Noncorrosivematerialsthatwon’trust
inthesaltair
+ Heatdeflectionsowindowsanddoorswon’t
compromiseperformanceoraesthetics
+ Ultrexresistsdistortioneven
attemperaturesupto350˚F
+ Expands/contracts833%
lessthanvinyl
+ DarkcolorslikeBronze
fade28%lessthanvinyl
+ OnesquareinchofUltrex
canholdtheweightof20cars—
totally60,000pounds
11. 9
IMPACT Casement and Awning windows are
engineered to remain airtight, watertight and secure
even during driving rains and heavy winds. Clean sight
lines and generous proportions enhance any coastal
view while the folding handles and rich wood interiors
are impressive inside the storm. Standard sizing
and matching transoms and picture units enable
multiple configurations.
Casement and Awning
Stands up to two forces
of nature: coastal storms and you.
+ StandardfoldinghandleinWhiteorAlmondFrost.
+ Interiorwoodispre-treatedandreadyforstainorpaint.
Ororderwithwhiteinteriorfinish.
+ Reliablehardwarepreventssaggingandallows
foreasycleaning.
+ StainlessSteelhardwarepackageforcorrosion
resistanceavailable.
+ Stationary,operatingandtransompictureunitsavailable.
IMPACTPRODUCTS
FROM INTEGRITY
12. 10
Same Double Hung look with a stronger design
you’ll never even notice. Between you and the view
are thicker checkrails, higher sill dam and reinforced
tilt latches to protect your home in IZ3 areas.
Add ergonomic hardware, a dramatic sloped sill and
wood to the interior and your windows are equally
as attractive as the views.
+ Low-profilesashlocksprovidesmoothoperation.
+ Apositivedetentreinforceswhenthewindowislocked.
+ Bothsasheasilytiltandremove.
+ Robustsillnoseand13.5degreeslopedsillalsoensure
properwatermanagement.
+ Furnituregradeinterior.Richwoodinterioroffers
asurroundofpinemilledtoasatinsmoothness.
double hung
Beautiful in the sun.
Strong behind the scenes.
IMPACTPRODUCTS
FROM INTEGRITY
14. 12
Big views beg for big
windows. IMPACT
polygons are available
with lengths of 96
and overall dimension
of 48 square feet.*
polygons
* Polygonsmaximumsizeis72x96.Whenthelongestlegexceeds72theshortestlegcannotexceed72.
15. 13
polygons
A new angle on protection
from the elements.
Your coastal view shapes up beautifully
with IMPACT Polygons that weather
the elements season after season, for years
to come. Eight shapes include rectangles,
triangles, pentagons, and octagons. Use them
as sidelights, transoms, and flankers for picture
windows or create unique configurations.
Finally, a standard line of windows that look
anything but standard.
IMPACTPRODUCTS
FROM INTEGRITY
16. The IMPACT Outswing French Door is ideal to walk
out and enjoy the setting sun, even for rooms with
limited interior space. The 8' height and wide stile and
rails create dramatic detail to the home inside and out.
Choose the best fit with the X and XX configurations.
Even after hundreds of sunsets, this door never gets old.
+ Traditionallystyledleverandescutcheonhandle
setavailableinWhite,AlmondFrost,BrassPVD,
SatinNickelPVDandOilRubbedBronzePVD.
+ AdjustablehingesavailableinWhite,PebbleGray,
Cashmere,Bronze,Evergreen,CoastalBrass
andCoastalSatinNickel.
+ Stainlesssteelmulti-pointlockingsystemseals
thedoorinfourlocations—head,sill,deadbolt,
andkeyedcylinder—forstabilityandsecurity.
+ Anoaksilllinercanbepaintedorstained
tomatchthesolidwoodinterior.
outswing french door
This door lets you
welcome the breeze.
And shut out the wind.
IMPACTPRODUCTS
FROM INTEGRITY
14
24. 22
POLYGON
How to Specify
When ordering a Trapezoid, Triangle, or Rectangle window,
provide a sketch of the unit as viewed from the exterior,
also include key Rough Opening dimensions.
Example: To order a window of a Trapezoid opening
provide the measurements of A, B, and C as indicated.
For other shapes, give the dimensions shown.
To ensure the proper unit for field mulling applications,
specify CA/AWN or DH/DR frame type.
Construction Details
1/4
[6] 1/2
[13]
MasonryOpening
FrameSize
RoughOpening
CasementPolygon
HeadJambandSill
1/4
[6] 1/2
[13]
RoughOpening
FrameSize
MasonryOpening
DoubleHung/DoorPolygon
HeadJambandSill
OptionalwoodinteriorGrillesandSDLsareavailableonDirectGlaze
Rectanglesonly.Litecutpatternsdependentonunitsizing.Contactyour
localIntegrityfromMarvinretailerfordetails.
AllspecialshapesandrectanglesareStandardTempered.
Specification Notes:
Maximumroughopening:48sq.ft.(44,593sq.cm.)
Maximum97(2464mm)roughopeningwidth.
Maximum961/2(2451mm)roughopeningheight.
Minimum137/8(352mm)roughopeningwidthrectangular;
P3-1,P3-2,P3-5,P4-5,P4-6,P5-1units.
Minimum133/8(340mm)roughopeningheightrectangular;
P3-1,P3-2,P3-5,P4-5,P4-6,P5-1units.
Minimum191/8(486mm)roughopeningwidthheight
P8-1units
Minimum8(203mm)roughopeningforshortestleg—
P3-1,P3-2,P3-5,P4-5,P4-6,P5-1,andP8-1units
25. 23
7-113/4(2432)6-101/4(2089)6-73/4(2026)
8-0(2438)6-101/2(2096)6-8(2032)
7-111/2(2426)6-10(2083)6-71/2(2019)
849/32(2141)7025/32(1798)689/32(1734)
OUTSWING FRENCH DOOR
Mas. Opg. (mm) 2-6 13/16 (783) 3-0 13/16 (935) 4-11 1/2 (1511) 5-11 1/2 (1816)
Rgh. Opg. (mm) 2-7 5/16 (796) 3-1 5/16 (948) 5-0 (1524) 6-0 (1829)
Frame Size (mm) 2-6 5/16 (770) 3-0 5/16 (923) 4-11 (1499) 5-11 (1803)
Glass Size (mm) 22 19/32 (574) 28 19/32 (726) 22 19/32 (574) 28 19/32 (726)
IOFD2665T O IOFD2665T XL IOFD2665T XR IOFD3065T O IOFD3065T XL IOFD3065T XR IOFD5065T XXL** IOFD6065T XXL**
Outswing French Doors (Also available in 6-5 and 8-0 heights)
IOFD2668T O IOFD2668T XL IOFD2668T XR IOFD3068T O IOFD3068T XL IOFD3068T XR IOFD5068T XXL** IOFD6068T XXL**
IOFD2680T O IOFD2680T XL IOFD2680T XR IOFD3080T O IOFD3080T XL IOFD3080T XR IOFD5080T XXL** IOFD6080T XXL**
IMPACTPRODUCTS
FROM INTEGRITY
1-4(406)
1-41/4(413)
1-33/4(400)
1215/16(329)
Mas. Opg. (mm) 3-0 13/16 (935) 5-11 1/2 (1816) 8-11 13/16 (2738)
Rgh. Opg. (mm) 3-1 5/16 (948) 6-0 (1829) 9-0 5/16 (2751)
Frame Size (mm) 3-0 5/16 (923) 5-11 (1803) 8-11 5/16 (2726)
Glass Size (mm) 33 1/2 (851) 68 3/16 (1732) 104 1/2 (2654)
IOFDG3616T IOFDG7216T IOFDG10816T
Outswing French Door Direct Glaze Transoms
Outswing Door Operation
X signifies an operating door panel, O means stationary. Listing the panels in a door starts from
the left to the right, looking from the exterior.
X-R X-L XX-R XX-L
Outswing Door Outswing Door Outswing Door Outswing Door
FrameSize
RoughOpening
MasonryOpening
1/4
[6] 1/2
[13]
1/4
[6]
1/4
[6]
1/2
[13]
1/2
[13]
RoughOpening
FrameSize
MasonryOpening
Construction Details
HeadJambandSill
Jamb–XXROperator
DetailsandElevationsnottoscale.
T=StandardTempered
O=Stationary X=Operator
L=LeftHandPanel R=RightHandPanel
OptionalwoodinteriorGrillesavailableinstandardrectangularlitecutshown.
OptionalSDLlitecutsavailableinseveralpopularconfigurations,contactyourlocalIntegrityfromMarvin
retailerfordetails.
**2and3panelXXconfigurationsalsoavailableinXXR.
Transomunitshavea2jambextensionfor6-9/16jambsora2-1/4jambextensionfor6-13/16jambs.
Whenordering6-9/16or6-13/16jambs,add1/4towidthand1/8toheightofFrameSize(FS),
RoughOpening(RO),orMasonryOpening(MO).
28. The natural choice
for nature’s best.
Coastal homes have a reputation for severe weather. The location that gives you
fantastic views also magnifies the elements such as severe temperatures, sun, salt
and wind day in and day out, wearing down your home’s exterior faster. Impact
products from Integrity Windows and Doors sustain the structural quality of your
home because of Ultrex®
, a pultruded fiberglass material that is builttoperform.
Ultrex outlasts the competition under normal conditions, but on the coast it leaves
them in the dust. Other materials can corrode and vinyl can distort, crack and
fade in just a handful of years, but durable low-maintenance Ultrex weathers the
harsh coastal conditions and looks fantastic in the sun.
IntegrityIMPACTCasementOperator/Stationary
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.37 2.70 50 0.30 0.50 NC,SC,S
LowEII-Argon 0.32 3.13 54 0.30 0.50 N,NC,SC,S
LowEII-Air-SDL 0.37 2.70 50 0.27 0.45 NC,SC,S
LowEII-Argon-SDL 0.32 3.13 54 0.27 0.45 N,NC,SC,S
THERMAL PERFORMANCE
DESIGN PRESSURE ratings
A design pressure rating, as defined by AAMA/WDMA/CSA 101/
I.S.2/A440-05, 101/I.S.2/NAFS-02, and ANSI/AAMA/NWWDA
101/I.S.2-97, is an indication of the amount of wind load an individual
window or door is intended to withstand when closed and locked.
Please consult your local Integrity®
fromMarvinrepresentative
for more information.
Integrity products have gone through HUD’s materials release
process (Form No. 1280) which allows them to qualify under the
WDMA Hallmark Certification Program for compliance with HUD
use of materials bulletin requirements (Form No. 59b).
Casement Windows DP+55/-65
Casement Picture DP+55/-65
Awning Windows DP+55/-65
Double Hung Windows DP+55/-65
Direct Glazed Windows DP+55/-65
OutswingFrenchDoors
X and O Doors DP+55/-65
XX Doors DP+55/-55
wind/impact zones
IMPACT products from Integrity are impact certified as defined
by ASTM E1996-02, ASTM E1996-05 and ASTM E1996-06,
and built to withstand winds up to 140 mph. They are rated for
the IZ3 area, but also exceed codes for IZ2 areas:
The only area IMPACT products have not been rated for is IZ4
which includes the Dade County area of Florida.
impact zone 2
• Sustainswindsfrom120mph
upto129mph
• Designpressuresapproach
50psffornegativeloads
• Standsuptowind-bornedebris
test;4'long2x4studshot
at40'persecond
• Testedagainst4500positive
and4500negativepressurecycles
impact zone 3
• Sustainswindsfrom120mph
upto140mph
• Designpressuresapproach
65psffornegativeloads
• Standsuptowind-bornedebris
test;8'long2x4studshot
at50'persecond
• Testedagainst4500positive
and4500negativepressurecycles
IntegrityIMPACTAwningOperator/Stationary
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.37 2.70 49 0.30 0.50 NC,SC,S
LowEII-Argon 0.32 3.13 54 0.30 0.50 N,NC,SC,S
LowEII-Air-SDL 0.37 2.70 49 0.27 0.45 NC,SC,S
LowEII-Argon-SDL 0.32 3.13 54 0.27 0.45 N,NC,SC,S
26
IntegrityIMPACTDoubleHung
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.38 2.63 48 0.32 0.53 NC,SC,S
LowEII-Argon 0.33 3.03 51 0.31 0.53 N,NC,SC,S
LowEII-Air-SDL 0.38 2.63 48 0.28 0.47 NC,SC,S
LowEII-Argon-SDL 0.33 3.03 51 0.28 0.47 N,NC,SC,S
IntegrityIMPACTDirectGlazeTransom/Polygon
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.30 3.33 56 0.34 0.59 N,NC,SC,S
LowEII-Argon 0.27 3.70 59 0.34 0.59 N,NC,SC,S
LowEII-Air-SDL 0.30 3.33 56 0.31 0.53 N,NC,SC,S
LowEII-Argon-SDL 0.27 3.70 59 0.31 0.53 N,NC,SC,S
IntegrityIMPACTDoubleHungPicture
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.37 2.70 49 0.33 0.55 NC,SC,S
LowEII-Argon 0.32 3.13 53 0.33 0.55 N,NC,SC,S
LowEII-Air-SDL 0.37 2.70 49 0.30 0.49 NC,SC,S
LowEII-Argon-SDL 0.32 3.13 53 0.29 0.49 N,NC,SC,S
IntegrityIMPACTOutswingFrenchDoor
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.37 2.70 53 0.28 0.46 NC,SC,S
LowEII-Argon 0.33 3.03 58 0.27 0.46 N,NC,SC,S
LowEII-Air-SDL 0.37 2.70 53 0.24 0.39 N,NC,SC,S
LowEII-Argon-SDL 0.33 3.03 58 0.24 0.39 NC,SC,S
IntegrityIMPACTCasementPicture
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.36 2.78 50 0.34 0.57 NC,SC,S
LowEII-Argon 0.31 3.23 54 0.34 0.57 N,NC,SC,S
LowEII-Air-SDL 0.36 2.78 50 0.31 0.51 NC,SC,S
LowEII-Argon-SDL 0.31 3.23 54 0.30 0.51 N,NC,SC,S
IMPACTPRODUCTS
FROM INTEGRITY
WARRANTY
This limited warranty is extended to all end users of Integrity®
Windows and Doors. Your Integrity products are warranted to be free from defects
in manufacturing, materials and workmanship. If such a defect appears during the term of this warranty, Integrity will, at its option (1) repair the defective
product, (2) replace the defective materials or (3) refund your purchase price. If replacement is elected, Integrity will not be responsible for installation
or refinishing of replacement parts.
This limited warranty is valid for ten (10) years from the date your Integrity product was originally purchased and is subject to the further Conditions
and Exclusions set forth below. The warranty of replacement products (including upgrades thereto) furnished pursuant to this warranty will be limited
to the remainder of the warranty period of the original product.
Twenty(20)YearInsulatingGlassLimitedWarranty
The insulating glass in your Integrity products is warranted against visible obstruction thru the glass caused by a failure of the insulating glass air seal
for a period of twenty (20) years from the date of original purchase. In the event visible obstruction occurs within the twenty (20) years, Integrity will,
at its option, provide replacement insulating glass with or without associated sash. Integrity will not be responsible for installation or refinishing of these
replacement parts.*
*Stress cracks are warranted against manufacturing defects for 10 years from original purchase date.
CLAIMS UNDER THESE WARRANTIES MUST BE MADE WITHIN 60 DAYS OF THE APPEARANCE OF A DEFECT.
ConditionsandExclusions
Integrity builds its windows and doors to be durable and long lasting. There are certain conditions or applications, however, over which Integrity has
no control. Defects or problems as a result of such conditions or applications are not the responsibility of Integrity and are not covered by this warranty.
They include:
YOUR EXCLUSIVE REMEDY WITH RESPECT TO ANY AND ALL LOSSES OR DAMAGES RESULTING FROM ANY CAUSE
WHATSOEVER SHALL BE AS SPECIFIED ABOVE. WE SHALL IN NO EVENT BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES OF ANY KIND, HOWEVER OCCASIONED, WHETHER BY NEGLIGENCE OR OTHERWISE. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES EXPRESS OR IMPLIED, AND NO PERSON (INCLUDING ANY AGENT, EMPLOYEE, DEALER, DISTRIBUTOR OR OTHER
REPRESENTATIVE) IS AUTHORIZED TO MAKE ANY OTHER REPRESENTATION OR WARRANTY CONCERNING THIS PRODUCT.
THIS WARRANTY IS NOT A WARRANTY OF FUTURE PERFORMANCE BUT ONLY A WARRANTY TO REPAIR/REPLACE OR REFUND.
IfYouHaveaWarrantyClaim
Your local Integrity distributor and dealer is equipped to handle your warranty claim quickly and efficiently. Because they are located near you, and
familiar with your purchase and/or project, your local Integrity dealer or distributor can best expedite the solution to your claim. If you have a warranty
claim with your Integrity window or door, call the dealer or distributor from whom the products were purchased. If you don’t know the name of the
dealer or distributor, call 1-800-346-5128 to locate the one nearest you. If, after 5 days, your local Integrity dealer or distributor has not responded
to your complaint, send a written complaint to Marvin Windows and Doors, P.O. Box 100, Warroad, Minnesota 56763, Attn: Warranty Department.
Include the following information in your letter: date you purchased your product; the dealer or distributor from whom your product was purchased;
description of product; specific definition of problem or defect; action that you’ve taken or contacts you’ve made with your local dealer or distributor;
and your name, address and phone number. Once we’ve received your letter, we’ll respond to your claim within 2 working days.
1/04
TenYearLimitedWarranty
• THIS LIMITED WARRANTY DOES NOT APPLY TO INTEGRITY
WINDOWS AND DOORS INSTALLED IN STRUCTURES THAT
DO NOT ALLOW FOR PROPER MANAGEMENT/ DRAINAGE
OF MOISTURE. FOR EXAMPLE, EXTERIOR INSULATION
AND FINISH SYSTEMS (“EIFS”), ALSO KNOWN AS
“SYNTHETIC STUCCO,” WITHOUT AN ENGINEERED
DRAINAGE SYSTEM.
• Improper installation, field finishing or maintenance.
• Any misuse, modification or alteration.
• Application of paint to any Integrity factory prefinish.
• Corrosion, wear or failure of hardware in seacoast applications.
• Normal wear or discoloration of finishes, including the tarnishing of brass.
• Variations in the color and grain of natural wood parts.
• Environmental conditions or use exceeding design standards.
• Warpage of 1/4 (6) or less of door stiles and rails.
• Minor glass imperfections that do not affect normal vision or product
performance, including curvature of glass due to atmospheric conditions.
• Condensation or frost on exposed surfaces of your Integrity windows
or doors. Condensation or frost is not a defect in the product, but a result
of excessive humidity. For more information about condensation and what
you can do to keep it to a minimum, write to:
Marvin Windows and Doors, P.O. Box 100, Warroad, Minnesota 56763.
27
29. The natural choice
for nature’s best.
Coastal homes have a reputation for severe weather. The location that gives you
fantastic views also magnifies the elements such as severe temperatures, sun, salt
and wind day in and day out, wearing down your home’s exterior faster. Impact
products from Integrity Windows and Doors sustain the structural quality of your
home because of Ultrex®
, a pultruded fiberglass material that is builttoperform.
Ultrex outlasts the competition under normal conditions, but on the coast it leaves
them in the dust. Other materials can corrode and vinyl can distort, crack and
fade in just a handful of years, but durable low-maintenance Ultrex weathers the
harsh coastal conditions and looks fantastic in the sun.
IntegrityIMPACTCasementOperator/Stationary
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.37 2.70 50 0.30 0.50 NC,SC,S
LowEII-Argon 0.32 3.13 54 0.30 0.50 N,NC,SC,S
LowEII-Air-SDL 0.37 2.70 50 0.27 0.45 NC,SC,S
LowEII-Argon-SDL 0.32 3.13 54 0.27 0.45 N,NC,SC,S
THERMAL PERFORMANCE
DESIGN PRESSURE ratings
A design pressure rating, as defined by AAMA/WDMA/CSA 101/
I.S.2/A440-05, 101/I.S.2/NAFS-02, and ANSI/AAMA/NWWDA
101/I.S.2-97, is an indication of the amount of wind load an individual
window or door is intended to withstand when closed and locked.
Please consult your local Integrity®
fromMarvinrepresentative
for more information.
Integrity products have gone through HUD’s materials release
process (Form No. 1280) which allows them to qualify under the
WDMA Hallmark Certification Program for compliance with HUD
use of materials bulletin requirements (Form No. 59b).
Casement Windows DP+55/-65
Casement Picture DP+55/-65
Awning Windows DP+55/-65
Double Hung Windows DP+55/-65
Direct Glazed Windows DP+55/-65
OutswingFrenchDoors
X and O Doors DP+55/-65
XX Doors DP+55/-55
wind/impact zones
IMPACT products from Integrity are impact certified as defined
by ASTM E1996-02, ASTM E1996-05 and ASTM E1996-06,
and built to withstand winds up to 140 mph. They are rated for
the IZ3 area, but also exceed codes for IZ2 areas:
The only area IMPACT products have not been rated for is IZ4
which includes the Dade County area of Florida.
impact zone 2
• Sustainswindsfrom120mph
upto129mph
• Designpressuresapproach
50psffornegativeloads
• Standsuptowind-bornedebris
test;4'long2x4studshot
at40'persecond
• Testedagainst4500positive
and4500negativepressurecycles
impact zone 3
• Sustainswindsfrom120mph
upto140mph
• Designpressuresapproach
65psffornegativeloads
• Standsuptowind-bornedebris
test;8'long2x4studshot
at50'persecond
• Testedagainst4500positive
and4500negativepressurecycles
IntegrityIMPACTAwningOperator/Stationary
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.37 2.70 49 0.30 0.50 NC,SC,S
LowEII-Argon 0.32 3.13 54 0.30 0.50 N,NC,SC,S
LowEII-Air-SDL 0.37 2.70 49 0.27 0.45 NC,SC,S
LowEII-Argon-SDL 0.32 3.13 54 0.27 0.45 N,NC,SC,S
26
IntegrityIMPACTDoubleHung
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.38 2.63 48 0.32 0.53 NC,SC,S
LowEII-Argon 0.33 3.03 51 0.31 0.53 N,NC,SC,S
LowEII-Air-SDL 0.38 2.63 48 0.28 0.47 NC,SC,S
LowEII-Argon-SDL 0.33 3.03 51 0.28 0.47 N,NC,SC,S
IntegrityIMPACTDirectGlazeTransom/Polygon
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.30 3.33 56 0.34 0.59 N,NC,SC,S
LowEII-Argon 0.27 3.70 59 0.34 0.59 N,NC,SC,S
LowEII-Air-SDL 0.30 3.33 56 0.31 0.53 N,NC,SC,S
LowEII-Argon-SDL 0.27 3.70 59 0.31 0.53 N,NC,SC,S
IntegrityIMPACTDoubleHungPicture
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.37 2.70 49 0.33 0.55 NC,SC,S
LowEII-Argon 0.32 3.13 53 0.33 0.55 N,NC,SC,S
LowEII-Air-SDL 0.37 2.70 49 0.30 0.49 NC,SC,S
LowEII-Argon-SDL 0.32 3.13 53 0.29 0.49 N,NC,SC,S
IntegrityIMPACTOutswingFrenchDoor
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.37 2.70 53 0.28 0.46 NC,SC,S
LowEII-Argon 0.33 3.03 58 0.27 0.46 N,NC,SC,S
LowEII-Air-SDL 0.37 2.70 53 0.24 0.39 N,NC,SC,S
LowEII-Argon-SDL 0.33 3.03 58 0.24 0.39 NC,SC,S
IntegrityIMPACTCasementPicture
ENERGY DATA U-Value R-Value CR SHGC VT ENERGY STAR
LowEII-Air 0.36 2.78 50 0.34 0.57 NC,SC,S
LowEII-Argon 0.31 3.23 54 0.34 0.57 N,NC,SC,S
LowEII-Air-SDL 0.36 2.78 50 0.31 0.51 NC,SC,S
LowEII-Argon-SDL 0.31 3.23 54 0.30 0.51 N,NC,SC,S
IMPACTPRODUCTS
FROM INTEGRITY
WARRANTY
This limited warranty is extended to all end users of Integrity®
Windows and Doors. Your Integrity products are warranted to be free from defects
in manufacturing, materials and workmanship. If such a defect appears during the term of this warranty, Integrity will, at its option (1) repair the defective
product, (2) replace the defective materials or (3) refund your purchase price. If replacement is elected, Integrity will not be responsible for installation
or refinishing of replacement parts.
This limited warranty is valid for ten (10) years from the date your Integrity product was originally purchased and is subject to the further Conditions
and Exclusions set forth below. The warranty of replacement products (including upgrades thereto) furnished pursuant to this warranty will be limited
to the remainder of the warranty period of the original product.
Twenty(20)YearInsulatingGlassLimitedWarranty
The insulating glass in your Integrity products is warranted against visible obstruction thru the glass caused by a failure of the insulating glass air seal
for a period of twenty (20) years from the date of original purchase. In the event visible obstruction occurs within the twenty (20) years, Integrity will,
at its option, provide replacement insulating glass with or without associated sash. Integrity will not be responsible for installation or refinishing of these
replacement parts.*
*Stress cracks are warranted against manufacturing defects for 10 years from original purchase date.
CLAIMS UNDER THESE WARRANTIES MUST BE MADE WITHIN 60 DAYS OF THE APPEARANCE OF A DEFECT.
ConditionsandExclusions
Integrity builds its windows and doors to be durable and long lasting. There are certain conditions or applications, however, over which Integrity has
no control. Defects or problems as a result of such conditions or applications are not the responsibility of Integrity and are not covered by this warranty.
They include:
YOUR EXCLUSIVE REMEDY WITH RESPECT TO ANY AND ALL LOSSES OR DAMAGES RESULTING FROM ANY CAUSE
WHATSOEVER SHALL BE AS SPECIFIED ABOVE. WE SHALL IN NO EVENT BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES OF ANY KIND, HOWEVER OCCASIONED, WHETHER BY NEGLIGENCE OR OTHERWISE. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES EXPRESS OR IMPLIED, AND NO PERSON (INCLUDING ANY AGENT, EMPLOYEE, DEALER, DISTRIBUTOR OR OTHER
REPRESENTATIVE) IS AUTHORIZED TO MAKE ANY OTHER REPRESENTATION OR WARRANTY CONCERNING THIS PRODUCT.
THIS WARRANTY IS NOT A WARRANTY OF FUTURE PERFORMANCE BUT ONLY A WARRANTY TO REPAIR/REPLACE OR REFUND.
IfYouHaveaWarrantyClaim
Your local Integrity distributor and dealer is equipped to handle your warranty claim quickly and efficiently. Because they are located near you, and
familiar with your purchase and/or project, your local Integrity dealer or distributor can best expedite the solution to your claim. If you have a warranty
claim with your Integrity window or door, call the dealer or distributor from whom the products were purchased. If you don’t know the name of the
dealer or distributor, call 1-800-346-5128 to locate the one nearest you. If, after 5 days, your local Integrity dealer or distributor has not responded
to your complaint, send a written complaint to Marvin Windows and Doors, P.O. Box 100, Warroad, Minnesota 56763, Attn: Warranty Department.
Include the following information in your letter: date you purchased your product; the dealer or distributor from whom your product was purchased;
description of product; specific definition of problem or defect; action that you’ve taken or contacts you’ve made with your local dealer or distributor;
and your name, address and phone number. Once we’ve received your letter, we’ll respond to your claim within 2 working days.
1/04
TenYearLimitedWarranty
• THIS LIMITED WARRANTY DOES NOT APPLY TO INTEGRITY
WINDOWS AND DOORS INSTALLED IN STRUCTURES THAT
DO NOT ALLOW FOR PROPER MANAGEMENT/ DRAINAGE
OF MOISTURE. FOR EXAMPLE, EXTERIOR INSULATION
AND FINISH SYSTEMS (“EIFS”), ALSO KNOWN AS
“SYNTHETIC STUCCO,” WITHOUT AN ENGINEERED
DRAINAGE SYSTEM.
• Improper installation, field finishing or maintenance.
• Any misuse, modification or alteration.
• Application of paint to any Integrity factory prefinish.
• Corrosion, wear or failure of hardware in seacoast applications.
• Normal wear or discoloration of finishes, including the tarnishing of brass.
• Variations in the color and grain of natural wood parts.
• Environmental conditions or use exceeding design standards.
• Warpage of 1/4 (6) or less of door stiles and rails.
• Minor glass imperfections that do not affect normal vision or product
performance, including curvature of glass due to atmospheric conditions.
• Condensation or frost on exposed surfaces of your Integrity windows
or doors. Condensation or frost is not a defect in the product, but a result
of excessive humidity. For more information about condensation and what
you can do to keep it to a minimum, write to:
Marvin Windows and Doors, P.O. Box 100, Warroad, Minnesota 56763.
27