This document provides an overview and structure of a service manual for construction equipment. It includes 8 sections that cover general information, removal/installation procedures, power train, brake, steering, hydraulic, electrical, and mast systems. The sections explain the structure, operation, troubleshooting, and maintenance of each system. Safety symbols and page numbering conventions are also defined to help technicians properly use and understand the manual.
Hyster C177 (H2.50XL Europe) Forklift Service Repair Manual.pdfufjsjekmd8du
1) This document provides specifications for Hyster lift trucks models H2.00XL, H2.50XL, and H3.00XL, including engine, hydraulic, electrical, and transmission specifications as well as lift truck weights, speeds, and capacities.
2) It lists information on four engine models used across the trucks such as bore/stroke, displacement, compression ratio, oil pressure, and ignition timing.
3) Hydraulic specifications include pump type, flow rates, relief pressures, system capacities, and operating temperatures.
Hyster C177 (H2.00XL Europe) Forklift Service Repair Manual.pdfufjsjekmd8du
This document provides specifications for Hyster lift trucks models H2.00XL, H2.50XL, and H3.00XL, including:
1) Weights and dimensions of each model lift truck.
2) Engine specifications for various engine options, including displacement, compression ratio, oil pressure requirements.
3) Hydraulic system specifications like pump type, flow rates, relief pressures.
4) Additional specifications for items like transmission pressures, mast speeds, tire sizes, capacities, and travel speeds.
Hyundai R360LC-7A Crawler Excavator Service Repair Manual.pdfufjsjekmd8du
1) This document provides instructions for removing and installing a hydraulic pump. It describes disconnecting hydraulic lines and removing mounting bolts to pull the pump from its housing.
2) The document describes the structure of the pump including its gear pump, drive shafts, bearings, pistons, plates, seals and other components. It provides tightening torques for assembly.
3) The disassembly instructions describe removing mounting bolts, draining oil, and separating individual components like casings, plates, seals and shafts. Care is needed to avoid damage and cleanliness is important.
Hyundai R180LC-9 Crawler Excavator Service Repair Manual.pdfufjsjekmd8du
The document provides instructions for removing and installing a hydraulic pump. It describes:
1) Draining the oil from the hydraulic tank and disconnecting hoses and pipes before removing the pump.
2) Installing the pump by reversing the removal steps and bleeding any air from the system.
3) The structure and components of the main pump including cylinders, pistons, plates, seals and bolts. It provides diagrams and labels the parts.
4) Tools and torque specifications for disassembling and assembling the pump.
Hyundai R160LC-9 Crawler Excavator Service Repair Manual.pdfufjsjekmd8du
The document provides instructions for removing and installing a hydraulic pump. It describes:
1. Draining the oil from the hydraulic tank and disconnecting hoses and pipes before removing the pump.
2. Installing the pump by reversing the removal steps and bleeding any air from the system.
3. The structure and components of the main pump including cylinders, pistons, plates, seals and bolts. It also provides tightening torques for installation.
4. The disassembly and assembly steps for the pump components while taking care not to damage parts. Cleaning and applying lubricant to sliding surfaces is emphasized.
Hyundai R140LC-9 Crawler Excavator Service Repair Manual.pdfufjsjekmd8du
1) The document provides instructions for removing and installing a hydraulic pump. Key steps include draining the oil, disconnecting hoses and pipes, removing mounting bolts, and lifting out the pump assembly.
2) Reinstallation is the reverse of removal. It includes cleaning parts, replacing filters, bleeding air from the system, and checking for leaks after startup.
3) The document then details the structure and components of the main pump, providing a diagram and list. It also provides torque specifications for fasteners and lists recommended tools.
Hyundai HLF202530(C)-5 Forklift Truck Service Repair Manual.pdfufjsjekmd8du
This document contains sections on various vehicle systems including the power train, brake, steering, hydraulic, electrical, and mast systems. Each section includes groups covering the structure and operation, troubleshooting, tests and adjustments, and disassembly and assembly of that system.
The steering system section provides details on disassembling and assembling the steering unit, steering cylinder, and steering axle. The process for disassembling and inspecting components of the steering cylinder is described. Instructions are provided on installing new seals and assembling the cylinder components. Specifications for checking clearance and wear limits are also included.
Hyundai 180D-7E Forklift Truck Service Repair Manual.pdfufjsjekmd8du
This document provides instructions for disassembling and assembling a steering unit. It consists of 5 sections covering the structure, operation, checks, tests, and removal/installation of steering system components. Section 5 specifically focuses on the steering unit and includes detailed steps and diagrams for disassembling and assembling the unit. The disassembly process involves removing 17 individual parts in a specific sequence. The assembly section provides instructions for cleaning, inspecting, lubricating, and reinstalling the parts in the reverse order of disassembly.
Hyster C177 (H2.50XL Europe) Forklift Service Repair Manual.pdfufjsjekmd8du
1) This document provides specifications for Hyster lift trucks models H2.00XL, H2.50XL, and H3.00XL, including engine, hydraulic, electrical, and transmission specifications as well as lift truck weights, speeds, and capacities.
2) It lists information on four engine models used across the trucks such as bore/stroke, displacement, compression ratio, oil pressure, and ignition timing.
3) Hydraulic specifications include pump type, flow rates, relief pressures, system capacities, and operating temperatures.
Hyster C177 (H2.00XL Europe) Forklift Service Repair Manual.pdfufjsjekmd8du
This document provides specifications for Hyster lift trucks models H2.00XL, H2.50XL, and H3.00XL, including:
1) Weights and dimensions of each model lift truck.
2) Engine specifications for various engine options, including displacement, compression ratio, oil pressure requirements.
3) Hydraulic system specifications like pump type, flow rates, relief pressures.
4) Additional specifications for items like transmission pressures, mast speeds, tire sizes, capacities, and travel speeds.
Hyundai R360LC-7A Crawler Excavator Service Repair Manual.pdfufjsjekmd8du
1) This document provides instructions for removing and installing a hydraulic pump. It describes disconnecting hydraulic lines and removing mounting bolts to pull the pump from its housing.
2) The document describes the structure of the pump including its gear pump, drive shafts, bearings, pistons, plates, seals and other components. It provides tightening torques for assembly.
3) The disassembly instructions describe removing mounting bolts, draining oil, and separating individual components like casings, plates, seals and shafts. Care is needed to avoid damage and cleanliness is important.
Hyundai R180LC-9 Crawler Excavator Service Repair Manual.pdfufjsjekmd8du
The document provides instructions for removing and installing a hydraulic pump. It describes:
1) Draining the oil from the hydraulic tank and disconnecting hoses and pipes before removing the pump.
2) Installing the pump by reversing the removal steps and bleeding any air from the system.
3) The structure and components of the main pump including cylinders, pistons, plates, seals and bolts. It provides diagrams and labels the parts.
4) Tools and torque specifications for disassembling and assembling the pump.
Hyundai R160LC-9 Crawler Excavator Service Repair Manual.pdfufjsjekmd8du
The document provides instructions for removing and installing a hydraulic pump. It describes:
1. Draining the oil from the hydraulic tank and disconnecting hoses and pipes before removing the pump.
2. Installing the pump by reversing the removal steps and bleeding any air from the system.
3. The structure and components of the main pump including cylinders, pistons, plates, seals and bolts. It also provides tightening torques for installation.
4. The disassembly and assembly steps for the pump components while taking care not to damage parts. Cleaning and applying lubricant to sliding surfaces is emphasized.
Hyundai R140LC-9 Crawler Excavator Service Repair Manual.pdfufjsjekmd8du
1) The document provides instructions for removing and installing a hydraulic pump. Key steps include draining the oil, disconnecting hoses and pipes, removing mounting bolts, and lifting out the pump assembly.
2) Reinstallation is the reverse of removal. It includes cleaning parts, replacing filters, bleeding air from the system, and checking for leaks after startup.
3) The document then details the structure and components of the main pump, providing a diagram and list. It also provides torque specifications for fasteners and lists recommended tools.
Hyundai HLF202530(C)-5 Forklift Truck Service Repair Manual.pdfufjsjekmd8du
This document contains sections on various vehicle systems including the power train, brake, steering, hydraulic, electrical, and mast systems. Each section includes groups covering the structure and operation, troubleshooting, tests and adjustments, and disassembly and assembly of that system.
The steering system section provides details on disassembling and assembling the steering unit, steering cylinder, and steering axle. The process for disassembling and inspecting components of the steering cylinder is described. Instructions are provided on installing new seals and assembling the cylinder components. Specifications for checking clearance and wear limits are also included.
Hyundai 180D-7E Forklift Truck Service Repair Manual.pdfufjsjekmd8du
This document provides instructions for disassembling and assembling a steering unit. It consists of 5 sections covering the structure, operation, checks, tests, and removal/installation of steering system components. Section 5 specifically focuses on the steering unit and includes detailed steps and diagrams for disassembling and assembling the unit. The disassembly process involves removing 17 individual parts in a specific sequence. The assembly section provides instructions for cleaning, inspecting, lubricating, and reinstalling the parts in the reverse order of disassembly.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
What Is Recruitment Processing Outsourcing (RPO) Services?Impeccable HR
Impeccable HR provides a wide range of RPO services for your bulk hiring needs within a stipulated period. They meticulously build RPO solutions to improve your recruitment process. RPO services are great for budget-conscious recruiters who want high-quality personnel.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2024 State of Marketing Report – by HubspotMarius Sescu
https://www.hubspot.com/state-of-marketing
· Scaling relationships and proving ROI
· Social media is the place for search, sales, and service
· Authentic influencer partnerships fuel brand growth
· The strongest connections happen via call, click, chat, and camera.
· Time saved with AI leads to more creative work
· Seeking: A single source of truth
· TLDR; Get on social, try AI, and align your systems.
· More human marketing, powered by robots
ChatGPT is a revolutionary addition to the world since its introduction in 2022. A big shift in the sector of information gathering and processing happened because of this chatbot. What is the story of ChatGPT? How is the bot responding to prompts and generating contents? Swipe through these slides prepared by Expeed Software, a web development company regarding the development and technical intricacies of ChatGPT!
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
What Is Recruitment Processing Outsourcing (RPO) Services?Impeccable HR
Impeccable HR provides a wide range of RPO services for your bulk hiring needs within a stipulated period. They meticulously build RPO solutions to improve your recruitment process. RPO services are great for budget-conscious recruiters who want high-quality personnel.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2024 State of Marketing Report – by HubspotMarius Sescu
https://www.hubspot.com/state-of-marketing
· Scaling relationships and proving ROI
· Social media is the place for search, sales, and service
· Authentic influencer partnerships fuel brand growth
· The strongest connections happen via call, click, chat, and camera.
· Time saved with AI leads to more creative work
· Seeking: A single source of truth
· TLDR; Get on social, try AI, and align your systems.
· More human marketing, powered by robots
ChatGPT is a revolutionary addition to the world since its introduction in 2022. A big shift in the sector of information gathering and processing happened because of this chatbot. What is the story of ChatGPT? How is the bot responding to prompts and generating contents? Swipe through these slides prepared by Expeed Software, a web development company regarding the development and technical intricacies of ChatGPT!
Product Design Trends in 2024 | Teenage EngineeringsPixeldarts
The realm of product design is a constantly changing environment where technology and style intersect. Every year introduces fresh challenges and exciting trends that mold the future of this captivating art form. In this piece, we delve into the significant trends set to influence the look and functionality of product design in the year 2024.
How Race, Age and Gender Shape Attitudes Towards Mental HealthThinkNow
Mental health has been in the news quite a bit lately. Dozens of U.S. states are currently suing Meta for contributing to the youth mental health crisis by inserting addictive features into their products, while the U.S. Surgeon General is touring the nation to bring awareness to the growing epidemic of loneliness and isolation. The country has endured periods of low national morale, such as in the 1970s when high inflation and the energy crisis worsened public sentiment following the Vietnam War. The current mood, however, feels different. Gallup recently reported that national mental health is at an all-time low, with few bright spots to lift spirits.
To better understand how Americans are feeling and their attitudes towards mental health in general, ThinkNow conducted a nationally representative quantitative survey of 1,500 respondents and found some interesting differences among ethnic, age and gender groups.
Technology
For example, 52% agree that technology and social media have a negative impact on mental health, but when broken out by race, 61% of Whites felt technology had a negative effect, and only 48% of Hispanics thought it did.
While technology has helped us keep in touch with friends and family in faraway places, it appears to have degraded our ability to connect in person. Staying connected online is a double-edged sword since the same news feed that brings us pictures of the grandkids and fluffy kittens also feeds us news about the wars in Israel and Ukraine, the dysfunction in Washington, the latest mass shooting and the climate crisis.
Hispanics may have a built-in defense against the isolation technology breeds, owing to their large, multigenerational households, strong social support systems, and tendency to use social media to stay connected with relatives abroad.
Age and Gender
When asked how individuals rate their mental health, men rate it higher than women by 11 percentage points, and Baby Boomers rank it highest at 83%, saying it’s good or excellent vs. 57% of Gen Z saying the same.
Gen Z spends the most amount of time on social media, so the notion that social media negatively affects mental health appears to be correlated. Unfortunately, Gen Z is also the generation that’s least comfortable discussing mental health concerns with healthcare professionals. Only 40% of them state they’re comfortable discussing their issues with a professional compared to 60% of Millennials and 65% of Boomers.
Race Affects Attitudes
As seen in previous research conducted by ThinkNow, Asian Americans lag other groups when it comes to awareness of mental health issues. Twenty-four percent of Asian Americans believe that having a mental health issue is a sign of weakness compared to the 16% average for all groups. Asians are also considerably less likely to be aware of mental health services in their communities (42% vs. 55%) and most likely to seek out information on social media (51% vs. 35%).
AI Trends in Creative Operations 2024 by Artwork Flow.pdfmarketingartwork
Creative operations teams expect increased AI use in 2024. Currently, over half of tasks are not AI-enabled, but this is expected to decrease in the coming year. ChatGPT is the most popular AI tool currently. Business leaders are more actively exploring AI benefits than individual contributors. Most respondents do not believe AI will impact workforce size in 2024. However, some inhibitions still exist around AI accuracy and lack of understanding. Creatives primarily want to use AI to save time on mundane tasks and boost productivity.
Organizational culture includes values, norms, systems, symbols, language, assumptions, beliefs, and habits that influence employee behaviors and how people interpret those behaviors. It is important because culture can help or hinder a company's success. Some key aspects of Netflix's culture that help it achieve results include hiring smartly so every position has stars, focusing on attitude over just aptitude, and having a strict policy against peacocks, whiners, and jerks.
PEPSICO Presentation to CAGNY Conference Feb 2024Neil Kimberley
PepsiCo provided a safe harbor statement noting that any forward-looking statements are based on currently available information and are subject to risks and uncertainties. It also provided information on non-GAAP measures and directing readers to its website for disclosure and reconciliation. The document then discussed PepsiCo's business overview, including that it is a global beverage and convenient food company with iconic brands, $91 billion in net revenue in 2023, and nearly $14 billion in core operating profit. It operates through a divisional structure with a focus on local consumers.
Content Methodology: A Best Practices Report (Webinar)contently
This document provides an overview of content methodology best practices. It defines content methodology as establishing objectives, KPIs, and a culture of continuous learning and iteration. An effective methodology focuses on connecting with audiences, creating optimal content, and optimizing processes. It also discusses why a methodology is needed due to the competitive landscape, proliferation of channels, and opportunities for improvement. Components of an effective methodology include defining objectives and KPIs, audience analysis, identifying opportunities, and evaluating resources. The document concludes with recommendations around creating a content plan, testing and optimizing content over 90 days.
How to Prepare For a Successful Job Search for 2024Albert Qian
The document provides guidance on preparing a job search for 2024. It discusses the state of the job market, focusing on growth in AI and healthcare but also continued layoffs. It recommends figuring out what you want to do by researching interests and skills, then conducting informational interviews. The job search should involve building a personal brand on LinkedIn, actively applying to jobs, tailoring resumes and interviews, maintaining job hunting as a habit, and continuing self-improvement. Once hired, the document advises setting new goals and keeping skills and networking active in case of future opportunities.
A report by thenetworkone and Kurio.
The contributing experts and agencies are (in an alphabetical order): Sylwia Rytel, Social Media Supervisor, 180heartbeats + JUNG v MATT (PL), Sharlene Jenner, Vice President - Director of Engagement Strategy, Abelson Taylor (USA), Alex Casanovas, Digital Director, Atrevia (ES), Dora Beilin, Senior Social Strategist, Barrett Hoffher (USA), Min Seo, Campaign Director, Brand New Agency (KR), Deshé M. Gully, Associate Strategist, Day One Agency (USA), Francesca Trevisan, Strategist, Different (IT), Trevor Crossman, CX and Digital Transformation Director; Olivia Hussey, Strategic Planner; Simi Srinarula, Social Media Manager, The Hallway (AUS), James Hebbert, Managing Director, Hylink (CN / UK), Mundy Álvarez, Planning Director; Pedro Rojas, Social Media Manager; Pancho González, CCO, Inbrax (CH), Oana Oprea, Head of Digital Planning, Jam Session Agency (RO), Amy Bottrill, Social Account Director, Launch (UK), Gaby Arriaga, Founder, Leonardo1452 (MX), Shantesh S Row, Creative Director, Liwa (UAE), Rajesh Mehta, Chief Strategy Officer; Dhruv Gaur, Digital Planning Lead; Leonie Mergulhao, Account Supervisor - Social Media & PR, Medulla (IN), Aurelija Plioplytė, Head of Digital & Social, Not Perfect (LI), Daiana Khaidargaliyeva, Account Manager, Osaka Labs (UK / USA), Stefanie Söhnchen, Vice President Digital, PIABO Communications (DE), Elisabeth Winiartati, Managing Consultant, Head of Global Integrated Communications; Lydia Aprina, Account Manager, Integrated Marketing and Communications; Nita Prabowo, Account Manager, Integrated Marketing and Communications; Okhi, Web Developer, PNTR Group (ID), Kei Obusan, Insights Director; Daffi Ranandi, Insights Manager, Radarr (SG), Gautam Reghunath, Co-founder & CEO, Talented (IN), Donagh Humphreys, Head of Social and Digital Innovation, THINKHOUSE (IRE), Sarah Yim, Strategy Director, Zulu Alpha Kilo (CA).
Trends In Paid Search: Navigating The Digital Landscape In 2024Search Engine Journal
The search marketing landscape is evolving rapidly with new technologies, and professionals, like you, rely on innovative paid search strategies to meet changing demands.
It’s important that you’re ready to implement new strategies in 2024.
Check this out and learn the top trends in paid search advertising that are expected to gain traction, so you can drive higher ROI more efficiently in 2024.
You’ll learn:
- The latest trends in AI and automation, and what this means for an evolving paid search ecosystem.
- New developments in privacy and data regulation.
- Emerging ad formats that are expected to make an impact next year.
Watch Sreekant Lanka from iQuanti and Irina Klein from OneMain Financial as they dive into the future of paid search and explore the trends, strategies, and technologies that will shape the search marketing landscape.
If you’re looking to assess your paid search strategy and design an industry-aligned plan for 2024, then this webinar is for you.
5 Public speaking tips from TED - Visualized summarySpeakerHub
From their humble beginnings in 1984, TED has grown into the world’s most powerful amplifier for speakers and thought-leaders to share their ideas. They have over 2,400 filmed talks (not including the 30,000+ TEDx videos) freely available online, and have hosted over 17,500 events around the world.
With over one billion views in a year, it’s no wonder that so many speakers are looking to TED for ideas on how to share their message more effectively.
The article “5 Public-Speaking Tips TED Gives Its Speakers”, by Carmine Gallo for Forbes, gives speakers five practical ways to connect with their audience, and effectively share their ideas on stage.
Whether you are gearing up to get on a TED stage yourself, or just want to master the skills that so many of their speakers possess, these tips and quotes from Chris Anderson, the TED Talks Curator, will encourage you to make the most impactful impression on your audience.
See the full article and more summaries like this on SpeakerHub here: https://speakerhub.com/blog/5-presentation-tips-ted-gives-its-speakers
See the original article on Forbes here:
http://www.forbes.com/forbes/welcome/?toURL=http://www.forbes.com/sites/carminegallo/2016/05/06/5-public-speaking-tips-ted-gives-its-speakers/&refURL=&referrer=#5c07a8221d9b
ChatGPT and the Future of Work - Clark Boyd Clark Boyd
Everyone is in agreement that ChatGPT (and other generative AI tools) will shape the future of work. Yet there is little consensus on exactly how, when, and to what extent this technology will change our world.
Businesses that extract maximum value from ChatGPT will use it as a collaborative tool for everything from brainstorming to technical maintenance.
For individuals, now is the time to pinpoint the skills the future professional will need to thrive in the AI age.
Check out this presentation to understand what ChatGPT is, how it will shape the future of work, and how you can prepare to take advantage.
The document provides career advice for getting into the tech field, including:
- Doing projects and internships in college to build a portfolio.
- Learning about different roles and technologies through industry research.
- Contributing to open source projects to build experience and network.
- Developing a personal brand through a website and social media presence.
- Networking through events, communities, and finding a mentor.
- Practicing interviews through mock interviews and whiteboarding coding questions.
Google's Just Not That Into You: Understanding Core Updates & Search IntentLily Ray
1. Core updates from Google periodically change how its algorithms assess and rank websites and pages. This can impact rankings through shifts in user intent, site quality issues being caught up to, world events influencing queries, and overhauls to search like the E-A-T framework.
2. There are many possible user intents beyond just transactional, navigational and informational. Identifying intent shifts is important during core updates. Sites may need to optimize for new intents through different content types and sections.
3. Responding effectively to core updates requires analyzing "before and after" data to understand changes, identifying new intents or page types, and ensuring content matches appropriate intents across video, images, knowledge graphs and more.
A brief introduction to DataScience with explaining of the concepts, algorithms, machine learning, supervised and unsupervised learning, clustering, statistics, data preprocessing, real-world applications etc.
It's part of a Data Science Corner Campaign where I will be discussing the fundamentals of DataScience, AIML, Statistics etc.
Time Management & Productivity - Best PracticesVit Horky
Here's my presentation on by proven best practices how to manage your work time effectively and how to improve your productivity. It includes practical tips and how to use tools such as Slack, Google Apps, Hubspot, Google Calendar, Gmail and others.
The six step guide to practical project managementMindGenius
The six step guide to practical project management
If you think managing projects is too difficult, think again.
We’ve stripped back project management processes to the
basics – to make it quicker and easier, without sacrificing
the vital ingredients for success.
“If you’re looking for some real-world guidance, then The Six Step Guide to Practical Project Management will help.”
Dr Andrew Makar, Tactical Project Management
Beginners Guide to TikTok for Search - Rachel Pearson - We are Tilt __ Bright...
Hyundai BRJ SERIES Forklift Truck Service Repair Manual.pdf
1. CONTENTS
SECTION 1 GENERAL
Group 1 Safety hints ---------------------------------------------------------------------------------------------------- 1-1
Group 2 Specifications ------------------------------------------------------------------------------------------------ 1-5
Group 3 Periodic replacement ------------------------------------------------------------------------------------- 1-16
SECTION 2 REMOVAL & INSTALLATION
Group 1 Structure -------------------------------------------------------------------------------------------------------- 2-1
Group 2 Removal and Installation of Unit ------------------------------------------------------------------- 2-2
SECTION 3 POWER TRAIN SYSTEM
Group 1 Structure and operation --------------------------------------------------------------------------------- 3-1
Group 2 Troubleshooting --------------------------------------------------------------------------------------------- 3-4
Group 3 Disassembly and assembly -------------------------------------------------------------------------- 3-6
SECTION 4 BRAKE SYSTEM
Group 1 Structure and function ----------------------------------------------------------------------------------- 4-1
SECTION 5 STEERING SYSTEM
Group 1 Structure and function ----------------------------------------------------------------------------------- 5-1
SECTION 6 HYDRAULIC SYSTEM
Group 1 Structure and function ----------------------------------------------------------------------------------- 6-1
Group 2 Operational checks and troubleshooting ------------------------------------------------------- 6-20
Group 3 Disassembly and assembly --------------------------------------------------------------------------- 6-24
SECTION 7 ELECTRICAL SYSTEM
Group 1 Component location -------------------------------------------------------------------------------------- 7-1
Group 2 Electrical circuit ---------------------------------------------------------------------------------------------- 7-2
Group 3 Electric components -------------------------------------------------------------------------------------- 7-3
SECTION 8 MAST
Group 1 Structure -------------------------------------------------------------------------------------------------------- 8-1
Group 2 Operational checks and troubleshooting ------------------------------------------------------- 8-3
Group 3 Adjustment ----------------------------------------------------------------------------------------------------- 8-6
Group 4 Removal and installation -------------------------------------------------------------------------------- 8-9
2. 0-1
FOREWORD
1. STRUCTURE
This service manual has been prepared as an aid to improve the quality of repairs by giving the
serviceman an accurate understanding of the product and by showing him the correct way to perform
repairs and make judgements. Make sure you understand the contents of this manual and use it to
full effect at every opportunity.
This service manual mainly contains the necessary technical information for operations performed in
a service workshop.
For ease of understanding, the manual is divided into the following sections.
SECTION 1 GENERAL
This section gives the general information of the machine and explains the safety hints for
maintenance.
SECTION 2 REMOVAL & INSTALLATION OF UNIT
This section explains the procedures and techniques of removal and installation of each component.
SECTION 3 POWER TRAIN SYSTEM
This section explains the structure of the transmission as well as control valve and drive axle.
SECTION 4 BRAKE SYSTEM
This section explains the brake piping, each component and operation.
SECTION 5 STEERING SYSTEM
This section explains the structure of the steering unit, priority valve, trail axle as well as steering
circuit and operation.
SECTION 6 HYDRAULIC SYSTEM
This section explains the structure of the gear pump, main control valve as well as work equipment
circuit, each component and operation.
SECTION 7 ELECTRICAL SYSTEM
This section explains the electrical circuit and each component.
It serves not only to give an understanding electrical system, but also serves as reference material for
troubleshooting.
SECTION 8 MAST
This section explains the structure of mast, carriage, backrest and forks.
The specifications contained in this service manual are subject to change at any time and without any
advance notice. Contact your HYUNDAI distributor for the latest information.
3. 0-2
Revised edition mark(①②③…)
When a manual is revised, an edition mark is
recorded on the bottom outside corner of the
pages.
R
Revisions
Revised pages are shown at the list of revised
pages on the between the contents page and
section 1 page.
Symbols
So that the shop manual can be of ample
practical use, important places for safety and
quality are marked with the following symbols.
2. HOW TO READ THE SERVICE MANUAL
Distribution and updating
Any additions, amendments or other changes will
be sent to HYUNDAI distributors.
Get the most up-to-date information before you
start any work.
Filing method
See the page number on the bottom of the
page.
File the pages in correct order.
Following examples shows how to read the
page number.
Example 1
2 - 3
Item number(2. Structure and
Function)
Consecutive page number for
each item.
Additional pages : Additional pages are
indicated by a hyphen(-) and number after the
page number. File as in the example.
1.
2.
3.
Symbol Item Remarks
Special safety precautions are
necessary when performing the
work.
Extra special safety precautions
are necessary when performing
the work because it is under
internal pressure.
Special technical precautions or
other precautions for preserving
standards are necessary when
performing the work.
Safety
Caution
※
10 - 4
10 - 4 - 1
10 - 4 - 2
10 - 5
Added pages
4. 0-3
3. CONVERSION TABLE
Method of using the Conversion Table
The Conversion Table in this section is provided to enable simple conversion of figures. For details of
the method of using the Conversion Table, see the example given below.
Example
Method of using the Conversion Table to convert from millimeters to inches
Convert 55mm into inches.
Locate the number 50in the vertical column at the left side, take this as ⓐ, then draw a
horizontal line from ⓐ.
Locate the number 5in the row across the top, take this as ⓑ, then draw a perpendicular line
down from ⓑ.
Take the point where the two lines cross as ⓒ. This point ⓒ gives the value when converting
from millimeters to inches. Therefore, 55mm = 2.165 inches.
Convert 550mm into inches.
The number 550 does not appear in the table, so divide by 10(Move the decimal point one place
to the left) to convert it to 55mm.
Carry out the same procedure as above to convert 55mm to 2.165 inches.
The original value(550mm) was divided by 10, so multiply 2.165 inches by 10(Move the decimal
point one place to the right) to return to the original value.
This gives 550mm = 21.65 inches.
1.
2.
(1)
(2)
(3)
(1)
(2)
(3)
Millimeters to inches 1mm = 0.03937 in
ⓑ
ⓐ
0 1 2 3 4 5 6 7 8 9
0 0.039 0.079 0.118 0.157 0.197 0.236 0.276 0.315 0.354
10 0.394 0.433 0.472 0.512 0.551 0.591 0.630 0.669 0.709 0.748
20 0.787 0.827 0.866 0.906 0.945 0.984 1.024 1.063 1.102 1.142
30 1.181 1.220 1.260 1.299 1.339 1.378 1.417 1.457 1.496 1.536
40 1.575 1.614 1.654 1.693 1.732 1.772 1.811 1.850 1.890 1.929
50 1.969 2.008 2.047 2.087 2.126 2.165 2.205 2.244 2.283 2.323
60 2.362 2.402 2.441 2.480 2.520 2.559 2.598 2.638 2.677 2.717
70 2.756 2.795 2.835 2.874 2.913 2.953 2.992 3.032 3.071 3.110
80 3.150 3.189 3.228 3.268 3.307 3.346 3.386 3.425 3.465 3.504
90 3.543 3.583 3.622 3.661 3.701 3.740 3.780 3.819 3.858 3.898
ⓒ
9. TEMPERATURE
Fahrenheit-Centigrade Conversion.
A simple way to convert a fahrenheit temperature reading into a centigrade temperature reading or vice verse
is to enter the accompanying table in the center or boldface column of figures.
These figures refer to the temperature in either Fahrenheit or Centigrade degrees.
If it is desired to convert from Fahrenheit to Centigrade degrees, consider the center column as a table of
Fahrenheit temperatures and read the corresponding Centigrade temperature in the column at the left.
If it is desired to convert from Centigrade to Fahrenheit degrees, consider the center column as a table of
Centigrade values, and read the corresponding Fahrenheit temperature on the right.
0-8
。
C 。
F 。
C 。
F 。
C 。
F 。
C 。
F
-40.4 -40 -40.0 -11.7 11 51.8 7.8 46 114.8 27.2 81 117.8
-37.2 -35 -31.0 -11.1 12 53.6 8.3 47 116.6 27.8 82 179.6
-34.4 -30 -22.0 -10.6 13 55.4 8.9 48 118.4 28.3 83 181.4
-31.7 -25 -13.0 -10.0 14 57.2 9.4 49 120.2 28.9 84 183.2
-28.9 -20 -4.0 -9.4 15 59.0 10.0 50 122.0 29.4 85 185.0
-28.3 -19 -2.2 -8.9 16 60.8 10.6 51 123.8 30.0 86 186.8
-27.8 -18 -0.4 -8.3 17 62.6 11.1 52 125.6 30.6 87 188.6
-27.2 -17 1.4 -7.8 18 64.4 11.7 53 127.4 31.1 88 190.4
-26.7 -16 3.2 -6.7 20 68.0 12.8 55 131.0 32.2 90 194.0
-26.1 -15 5.0 -6.7 20 68.0 12.8 55 131.0 32.2 90 194.0
-25.6 -14 6.8 -6.1 21 69.8 13.3 56 132.8 32.8 91 195.8
-25.0 -13 8.6 -5.6 22 71.6 13.9 57 134.6 33.3 92 197.6
-24.4 -12 10.4 -5.0 23 73.4 14.4 58 136.4 33.9 93 199.4
-23.9 -11 12.2 -4.4 24 75.2 15.0 59 138.2 34.4 94 201.2
-23.3 -10 14.0 -3.9 25 77.0 15.6 60 140.0 35.0 95 203.0
-22.8 -9 15.8 -3.3 26 78.8 16.1 61 141.8 35.6 96 204.8
-22.2 -8 17.6 -2.8 27 80.6 16.7 62 143.6 36.1 97 206.6
-21.7 -7 19.4 -2.2 28 82.4 17.2 63 145.4 36.7 98 208.4
-21.1 -6 21.2 -1.7 29 84.2 17.8 64 147.2 37.2 99 210.2
-20.6 -5 23.0 -1.1 35 95.0 21.1 70 158.0 51.7 125 257.0
-20.0 -4 24.8 -0.6 31 87.8 18.9 66 150.8 40.6 105 221.0
-19.4 -3 26.6 0 32 89.6 19.4 67 152.6 43.3 110 230.0
-18.9 -2 28.4 0.6 33 91.4 20.0 68 154.4 46.1 115 239.0
-18.3 -1 30.2 1.1 34 93.2 20.6 69 156.2 48.9 120 248.0
-17.8 0 32.0 1.7 35 95.0 21.1 70 158.0 51.7 125 257.0
-17.2 1 33.8 2.2 36 96.8 21.7 71 159.8 54.4 130 266.0
-16.7 2 35.6 2.8 37 98.6 22.2 72 161.6 57.2 135 275.0
-16.1 3 37.4 3.3 38 100.4 22.8 73 163.4 60.0 140 284.0
-15.6 4 39.2 3.9 39 102.2 23.3 74 165.2 62.7 145 293.0
-15.0 5 41.0 4.4 40 104.0 23.9 75 167.0 65.6 150 302.0
-14.4 6 42.8 5.0 41 105.8 24.4 76 168.8 68.3 155 311.0
-13.9 7 44.6 5.6 42 107.6 25.0 77 170.6 71.1 160 320.0
-13.3 8 46.4 6.1 43 109.4 25.6 78 172.4 73.9 165 329.0
-12.8 9 48.2 6.7 44 111.2 26.1 79 174.2 76.7 170 338.0
-12.2 10 50.0 7.2 45 113.0 26.7 80 176.0 79.4 172 347.0
10. SECTION 6 HYDRAULIC SYSTEM
Group 1 Structure and function ------------------------------------------------------------------------------------ 6-1
Group 2 Operational checks and troubleshooting -------------------------------------------------------- 6-20
Group 3 Disassembly and assembly --------------------------------------------------------------------------- 6-24
11. 6-1
GROUP 1 STRUCTURE AND FUNCTION
SECTION 6 HYDRAULIC SYSTEM
1. HYDRAULIC CIRCUIT (14/16BRJ-7)
4
3
5
2
6
8
M
1
7
9
BRJ7HS01
1 Hydraulic pump
2 Main control valve
3 Lift cylinder
4 Down safety valve
5 Tilt cylinder
6 Reach cylinder
7 Return filter
8 Suction strainer
9 Hydraulic tank
13. 6-3
m5
m6
emergency
lowering DW3
DW2
m2
m1
m4
m3
130bar
m7
m8
130bar
4
3
5
2
6
8
M
1
7
9
BRJ7HS02
WHEN THE LIFT CONTROL LEVER IS IN THE LIFT POSITION (14/16BRJ-7)
1)
When the lift control lever is pulled back, the m1 valve on the lift block is moves to open position.
The oil from hydraulic gear pump(1) flows into main control valve(2) and then goes to the large
chamber of lift cylinder(3).
The oil from the small chamber of lift cylinder(3) returns to hydraulic oil tank(9) at the same time.
When this happens, the forks go up.
14. 6-4
4
3
5
2
6
8
M
1
7
9
BRJ7HS08
WHEN THE LIFT CONTROL LEVER IS IN THE LIFT POSITION (20/25BRJ-7)
When the lift control lever is pulled back, the m1 valve on the lift block is moves to open position.
The oil from hydraulic gear pump(1) flows into main control valve(2) and then goes to the large
chamber of lift cylinder(3).
17. 6-7
m5
m6
emergency
lowering DW3
DW2
m2
m1
130bar
m7
m8
130bar
4
3
5
2
6
8
M
1
7
9
m4
m3
BRJ7HS04
WHEN THE TILT CONTROL LEVER IS IN THE BACKWARD POSITION
3)
When the tilt control lever is pulled backward, the spool on the second block is moved to tilt
backward position.
The oil from hydraulic gear pump(1) flows into main control valve(2) and then goes to the large
chamber of tilt cylinder(5).
The oil at the small chamber of tilt cylinder(5) returns to hydraulic tank(9) at the same time.
18. 6-8
m5
m6
G10
emergency
lowering DW3
DW2
m2
m1
H
P
R
MP
LS
DBV
G16
m4
m3
130bar
A B
m7
m8
G25
A B
A B
T
190 bar
130bar
(at 40lpm)
4
3
5
2
6
8
14/16BRJ ONLY
M
1
7
9
BRJ7HS05
WHEN THE TILT CONTROL LEVER IS IN THE FORWARD POSITION
4)
When the tilt control lever is pushed forward, the spool on the second block is moved to tilt forward
position.
The oil from hydraulic gear pump(1) flows into main control valve(2) and then goes to the small
chamber of tilt cylinder(5).
The oil at the large chamber of tilt cylinder(5) returns to hydraulic tank(9) at the same time.
19. 6-9
m5
m6
G10
emergency
lowering DW3
DW2
m2
m1
H
P
R
MP
LS
DBV
G16
m4
m3
130bar
A B
m7
m8
G25
A B
A B
T
190 bar
130bar
(at 40lpm)
4
3
5
2
6
8
14/16BRJ ONLY
M
1
7
9
BRJ7HS06
WHEN THE REACH CONTROL LEVER IS IN THE FORWARD (REACH OUT) POSITION
5)
When the reach control lever is pushed forward, the spool on the third block is moved to reach out
position.
The oil from hydraulic gear pump(1) flows into main control valve(2) and then goes to the large
chamber of reach cylinder(6).
The oil at the small chamber of reach cylinder(6) returns to hydraulic tank(9) at the same time.
When this happens, the mast reaches out.
20. 6-10
4
3
5
2
6
8
M
1
7
9
BRJ7HS07
WHEN THE REACH CONTROL LEVER IS IN THE BACKWARD (REACH IN) POSITION
6)
When the reach control lever is pulled backward, the spool on the third block is moved to reach in
position.
The oil from hydraulic gear pump(1) flows into main control valve(2) and then goes to the small
chamber of reach cylinder(6).
The oil at the large chamber of reach cylinder(6) returns to hydraulic tank(9) at the same time.
When this happens, the mast reaches in.
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. 6-11
2. HYDRAULIC GEAR PUMP
STRUCTURE
1
10
12
3 14
13
7
8
2
5
4
6
9
11
9
6
8
7
11
BRJ7HS19
1 Mounting frange
2 End cover
3 Gear housing
4 Drive gear
5 Idler shaft
6 Bearing block
7 Backup ring
8 Seal
9 O-ring
10 Shaft seal
11 Dowel pin
12 Start ring
13 Socket head bolt
14 Spring washer
1)
OPERATION
This pump comprises of an rear cover, a body, bushings and a housing bolted together with bolts.
The gear journals are supported in side plate within pressure balanced bushings to give high
volumetric and mechanical efficiencies.
2)
23. 6-12
3. MAIN CONTROL VALVE
STRUCTURE (3 Spool)
1)
6
7
2
6
12
17
19
5
10
19
17
17
4
4
4
4-2
4-3
4-5
4-1
4-4
2-3
2-2
2-5
2-1
2-5
2-4
2
4
4
3
8
19
18
18
18
19
1
2
15
16
14
14
15
16
13
H R
P
A
B
A
B
BRJ7HS12A
1 Main block
2 Solenoid valve (Lift)
2-1 EVI coil
2-2 Washer
2-3 Lock washer
2-4 Black plug
2-5 O-ring
3 Tilt block
4 Solenoid valve
4-1 Coil
4-2 Disc
4-3 Circlip
4-4 Black plug
4-5 O-ring
5 Roll pin
6 Adapter
7 Head screw
8 Reach block
10 Roll pin
Port name
Inlet port
Outlet port
Work port
Work port
Size
1 1/16-12UN
1 1/16-12UN
1 1/16-12UN
9/16-18 UNF
Port
P
R
H
A, B
11 Adapter
12 Head screw
13 End block
14 Tension rod
15 Shape washer
16 Hexagon nut
17 O-ring
18 O-ring
19 O-ring