The document outlines the steps taken by two work groups from Cairo University to model a propane refrigeration system using ASPEN HYSYS software. The groups added components, defined specifications for the evaporator, compressor, cooler and JT valve, imported data into a spreadsheet, and obtained results from the simulation.

1. Mahmoud Ahmed Mohamed Abd Raboh
Ehab Taha Mohamed Ismail
Yousuf Mohamed Abdulrahman Abo Ashour
Hossam Mohamed Eid Azzam
Mohamed Maher Mohamed Ahmed
Cairo University
ASPEN HYSYS
PROPANE REGRIGERATION
Work Group (2)
Ramadan Hasan Ibrahim
Saeed Atef Abo-Qara Amer
Ahmed Gamal Abdullah Abdo
Abdulrahman Abdul-Aziz Elsayed Abdul-Aziz
Mahmoud Shaaban Mahmoud Salem

2. Create NEW Case

3. Add components

4. Add Fluid Package

5. Add Steam

6. Define Composition

7. Define Evaporator/Heater

8. Define Evaporator/Heater Specs

9. Define Evaporator/Heater Specs

10. Define Evaporator/Heater Specs

11. Define Evaporator/Heater Specs

12. Define Evaporator/Heater Specs

13. Add Compressor

14. Define Compressor Specs

15. Define Compressor Specs

16. Define Compressor Specs

17. Add Cooler

18. Define cooler specs

19. Define cooler specs

20. Define cooler specs

21. Define cooler specs

22. Add JT valve

23. Define JT valve Specs

24. Define JT valve Specs

25. Add Spreadsheet

26. Add Spreadsheet

27. import data to the Spreadsheet

28. import data to the Spreadsheet

29. Results

30. THANK
YOU!