NA

1. Stainless Steel
(Low Temperature
Rise Grade)
Interface
With Capacitor
Alloy Resistance
Wire, wound on Thermally
Efficient Ceramic Core
Flame Retardant
Silicone Coating
WIRE WOUND RESISTORS
HSR/HSRC
SERIES
SYMMERTY WIRE WOUND RESISTORS
High Power Capacitor
Discharge Resistors
• 8.25W to 25W
• 10K to 120K
e : info@htr-india.com
www.htr-india.com
Rev Date : 22/05/2019
AEC-Q200Qualified

2. PHYSICAL CONFIGURATION (Coated Style) - HSR Series
HTR TYPE POWER RATING
D
±1.0
P
±1.0
DIMENSIONS (mm) RESISTANCE RANGE TYPICAL
WEIGHT
PER PC
(gms)
min max
P1
(max)
* Resistance value lower than the above are possible on request
at 70°C at 25°C
TEMP. AT FULL
POWER ON BODY T(a) &
ON INTERFACE WITH
CAPACITOR T(b)
[AMB TEMP 30°C]
SR8 8.25W 10W 9.65 22.30 38.0 260°C 57°C 10K 75K 8.0
SR11 11W 13W 9.65 31.85 49.0 264°C 59°C 10K 110K 8.75
SR20 20W 25W 9.65 48.85 66.0 300°C 65°C 10K 120K 13.00
HTR TYPE POWER RATING RESISTANCE RANGE TYPICAL
WEIGHT
PER PC
(gms)
min max
at 70°C at 25°C
TEMPERATURE AT FULL POWER ON BODY T(a) & ON
INTERFACE WITH
CAPACITOR T(b) [AMB TEMP 30°C]
SRC11 11W 13W 258°C 50°C 10K 110K 27
SRC20 20W 22W 264 °C 52°C 10K 110K 27
SRC25 25W 27W 278°C 52°C 10K 110K 27
PHYSICAL CONFIGURATION (Ceramic Encased Style) - HSRC Series
T(b)
T(a)
T(b)
T(a)
WIRE WOUND
RESISTORS
HSR/
HSRC
e : info@htr-india.com
www.htr-india.com
15.50 MM (MAX)
66.0 MM (MAX)
14.75 MM (MAX)
Rev Date : 22/05/2019

3. ELECTRICAL & ENVIRONMENTAL CHARACTERISTICS / DATA
Power Rating (Rated Ambient Temperature) Full Power dissipation at 70°C and linearly derated
to zero at 350°C (Refer Derating Curve above)
Resistance Tolerances Available ±10% (K); ±5% (J); ±3% (H); ±2% (G); ±1% (F)
Temperature Range -55°C to +350°C with suitable derating
as per derating curve
Voltage Rating / Limiting Voltage / Max. Working Voltage V= PxR
Voltage Proof / Dielectric Withstanding Voltage ∆R ± [1% + R05]
(based on limiting voltage x 2 or 500V whichever is applicable)
Temperature Co-efficient of Resistance ± 90 or ± 30 ppm/°C depending on wire selected
Short Time Overload (10 x Rated Power for 5 secs) ∆R ± [2% + R05]
Insulation Resistance (Test Method no. 302 of MIL 202F) >1000M (Dry)
>100M (Wet)
Endurance - Load life ∆R ± [≤5% + R05]
(70°C with limiting voltage - 1.5 hours on / 0.5 hours off for 1000 hours)
Solvent Resistance (IPA for 60 secs ± 10 secs) No effect on coating / marking or case filling
Vibration Test (As per IEC 60571-1) No effect
PARAMETER/PERFORMANCE TEST & TEST METHOD PERFORMANCE REQUIREMENTS
For RoHS version - SR11* / SRC25*
TYPICAL APPLICATIONS
• These high power wire wound resistors have low temperature rise stainless steel mounting lugs fitted to them at a pitch which is ideally
suitable to mount on capacitors and are used mainly for voltage balancing of aluminium electrolytic capacitors connected in series.
• These resistors are also used in safety applications; wherein they have been found suitable for capacitor voltage discharge applications
in high voltage circuits.
Note:
The ceramic cases used may be steatite ceramic or corderite ceramic or high alumina ceramic. Hence, the ceramic cases may be offwhite
or variations of brown and variations of grey; colours which are inherent to these ceramic materials.
ORDERING INFORMATION
Series Type Packing Resistance Value Tolerance
HSR / SR8/SR8* Bulk SR8/SR8*
HSRC SRC25/SRC25* Bulk SRC25/SRC25*
15K J
WIRE WOUND
RESISTORS
HSR/
HSRC
e : info@htr-india.com
www.htr-india.com
Rev Date : 22/05/2019