The document discusses reasons why a Volvo XC60's check engine light may come on and how to reset it. Common causes for the check engine light include a faulty gas cap, problematic catalytic converter, failing ignition system, disproportionate air-fuel ratio, and faulty sensors. To reset the check engine light, one can use an OBD-II scanner to retrieve error codes and diagnose issues, or disconnect the car battery for a moment to erase error codes and turn off the light.

1. How To Reset Your
Volvo XC60 Check
Engine Light?

2. Lit-up check engine light
(CEL) warns you that
something is wrong with
your car.

3. Below, we’ve rounded up some
reasons why your Volvo XC60 CEL
may come on.

4. Is your Volvo
XC60 check
engine light on?-
Here’s why

5. Gas Cap Is Faulty

6. One of the prime
reason why your CEL
may come on is- a
faulty gas cap.

7. Gas cap is designed to
prevent unwanted loss of
fuel vapors from the gas
tank.

8. Faulty gas cap in your
Volvo XC60 can set off
the ‘check engine
light’.

9. Problematic Catalytic
Converter

10. Another major issue that
can set off your CEL is- a
faulty catalytic converter.

11. Therefore, if your
Volvo’s CEL is on, the
first thing you should
do is to check its
catalytic converter.

12. Failing Ignition System

13. Sparks generated by the
ignition system ignites
the air-fuel mixture
within the cylinder.

14. Improper spark plug
firing due to flaws in
the system can trigger
the CEL in your car.

15. Disproportionate Air-
Fuel Ratio

16. Rough engine performance
due to imbalanced air-fuel
ratio can also prompt your
car computer to set off the
CEL.

17. Issue With The Sensors

18. The ECU relies on a
series of sensors to
control the engine
operation.

19. Faulty sensors may
interfere with the engine
operation, causing the CEL
light to come on.

20. Volvo XC60 check
engine light- How
to reset it?

21. It’s very simple. Here’s how you
can do that:-
Use an OBD-II scanner to retrieve the
error code stored in the computer.
Then, take suitable measures to
diagnose the issue further.

22. You can also erase the
error code to reset the
CEL light in your car.

23. And to do that, you just
have to disconnect your car
battery for a moment.

24. You can also erase the
error code with the
help of an OBD-II
scanner.

25. Endnote

26. The check engine light in
your car may come on due
to a variety of reasons.

27. You can use an OBD-II
scanner to diagnose
and fix the problem.

28. DELL’S
SERVICE CENTER
https://dellsservicecenter.com/
/DellsServiceCenter/