2. WATER HEATER PARTS
A dip tube for cold water to enter the tank
A spout for hot water to come out of the tank
Electric heating elements or gas burners
A drain valve to flush the tank when replacing items
A thermostat to control water temperature inside the tank
Pressure or temperature relief valve that prevents the tank from
exploding
A sacrificial anode to prevent the steel tank from rusting
Gas piping when it comes to gas water heaters.
Electric wiring when it comes to electric heaters
Most residential heater tanks have a capacity of 40 to 60 gallons and
can withstand the average pressure of a residential water system
(typically 50 to 100 psi). Steel tanks are pressure tested to 300 psi and
have a fiberglass liner that prevents rust from reaching the water and
insulation. Other parts of a water heater include:
Galería de arte de Aurora | 2020
3. If your home has a forced-air HVAC and a gas water heater,
you must consider the interaction between both systems.
Indeed, adequate water heater and HVAC maintenance can
directly affect utility bills. And HVAC systems and water
heater units are part of your heating system.
4. INTERACTIONS BETWEEN HVAC AND WATER HEATERS
Also, it is essential to consider that HVAC
systems include appliances designed to cool
and heat your home, while water heaters are
part of your plumbing system. In this context,
the HVAC system is not associated with the
hot water supplying your faucets, showers,
dishwasher, and washing machine.
Otherwise, combi boilers can heat water, but
they are designed to provide heat for your
home (not just hot water), and they are part
of the HVAC category.
Galería de arte de Aurora | 2020
5. The best way to preserve your energy efficiency and safe
environment in your home is by keeping HVAC Systems
and Water Heater Systems well-installed and set.
PROPER INSTALLATION
6. THE RISKS OF PLACING ITEMS NEAR A
WATER HEATER
Water heaters involve a safety risk if they are not kept well
maintained. Also, when living in reduced homes, apartments,
or condos, some homeowners try to solve the lack the extra
storage space they need by cluttering critical areas such as
the water heater location. However, this measure can be a
potential hazard because it can increase the appliance’s
temperatures and hinder ventilation. Also, if you store
combustible materials and flammable, they could catch fire.
7. When the thermostat is damaged, the water can continue to boil
the water and pressure will build up and likely burst and burst the
pipes, creating a high-risk situation.
Another cause that could cause an explosion is a corroded
accessory. In this case, a leak will spread, generating small
explosions, so it is very important to act quickly and cut off the gas
supply.