The starter solenoid is designed to energize the starter motor. Failure of such an important component can make it difficult for you to start the engine. So, if you are noticing symptoms of a bad starter solenoid in your Volkswagen, then take it to the nearest car repair shop to get the solenoid replaced.

1. How To Diagnose A
Bad Starter
Solenoid In Your
Volkswagen?

3. It’s an electromagnet
that connects the
ignition module with
the starter motor.

4. When you push the
ignition button, it
activates the starter
solenoid which in turn
energizes the starter
motor.

5. Having a faulty starter
solenoid can put your
Volkswagen’s ignition
system in jeopardy.

7. Listed below are some
of the most common
reasons behind starter
solenoid failure;
• Extreme heat
• Disconnected terminals
• Bad wiring
• Moisture and contaminants
• Mechanical issues

10. The job of a starter
motor is to turn the
engine over during the
ignition process.

11. By doing so, it helps
the engine to sip the
required amount of air
and fuel.

12. However, a faulty
solenoid can impair
the starter motor.

13. As a result of which,
the engine won’t
crank.

15. The starter motor is
supposed to disengage
automatically, once the
engine has started.

16. However, a defective
solenoid would not kill
power to the starter
motor.

17. As a consequence of
this, the starter motor
remains on.

19. A defective solenoid
makes the starter
motor run rough and
generate scary noises.

20. So, if you’re hearing
clicking or whining
noise, then check if the
starter solenoid is
working or not.

21. If it has some issues,
consider installing a
new one.

23. A faulty solenoid can
put your Volkswagen’s
ignition system in
jeopardy.

24. So, consider installing
a new solenoid to keep
the starter motor
operational.

25. https://woodinvillesportscars.com/
https://www.facebook.com/woodinville
sportscars
https://www.youtube.com/user/Woodinvillesc
THANK
YOU