This document provides instructions for building a cornhole game set. It includes dimensions for the cornhole boards which should be 24" by 48" rectangles with a 6" diameter hole located 6" from the wide side and 9" from the long side. It also specifies that the base and reinforcements should have the board height at 3" and stand height at 9" at an obtuse angle. A list of required materials includes plywood, 2x4 boards, bolts, washers, nuts, screws and paint. Tools needed are saws, measuring tape, drill, sandpaper, compass and jigsaw. Directions outline cutting the holes, frames and legs, assembling the frames and taping off any designs before