Enco HOTdeals July 2013 Catalog

01-72 CP 13-07 CustomerProspect Cover.indd 201-72 CP 13-07 CustomerProspect Cover.indd 2 6/19/13 10:05 AM6/19/13 10:05 AM

PHONE: 800-USE-ENCO (800-873-3626)
QUICK INDEX
IT’S IN STOCK AND READY TO SHIP!
• 99% In-Stock Inventory!
• All in-stock orders ship within one business day. Ask your
sales associate for details
SHIPPING DETAILS
Our primary shipping method for orders weighing less
than 125 lbs. is UPS Ground. Some items weighing less
than 125 lbs. must be shipped truck due to size or fragility. DOT
regulated items cannot be shipped via air. Alaska,
Hawaii and Puerto Rico customers - Air shipments only.
“Free Shipping” applies to select items that are identified
in a current Enco catalog. “Free Shipping” means standard
ground (small parcel or truck) shipment to a location within the
continental U.S. only. Lift gate and other non-standard
services will incur an additional charge; call for details.
Enco does not accept C.O.D. payment for any order. Residential
deliveries will incur a $1.15 surcharge. Rural deliveries will
incur a $1.75 surcharge.
RETURNS
You may return an item for credit within 30 days of shipment,
provided it is unused and in resalable condition, found to be
defective, or not specifically restricted from returns.
Call Enco at 800-USE-ENCO to obtain a Return Authorization (RA)
number. No returns will be accepted without an RA number.
Machinery will be repaired or replaced at Enco’s discretion
and according to our Machinery Warranty; ask for details before
purchasing.
All prices are subject to change without notice. Pricing,
photographic and typographical errors are subject to corrections.
For complete Terms of Sale, see the current Enco Master
Catalog, visit use-enco.com, or call 800-USE-ENCO.
OUR TERMS OF SALE
WE WILL BEAT ANY
ADVERTISED PRICE!
If you find a lower advertised price
on any item we sell, just send us a
copy of the ad and Enco will meet
it and beat it by 5%!*
*Some limitations apply.
Please call for details.
Abrasives............................52-55
Books & Reference....................63
Cutting Tools .......................26-41
Fluids ................................56-57
Hand & Power Tools...............68-71
Machine Tool Accessories ........ 4-14
Machinery...........................15-25
Material Handling & Storage ....60-62
Measuring Tools ...................42-51
Raw Materials......................58-59
Shop Supplies ......................64-67
FOR FREE UPS SHIPPING ON YOUR ORDER OF $99 OR MORE:
By Phone: Give the promo code to your friendly Enco Sales Associate.
Online: Enter the promo code on the shopping cart page and click apply.
HURRY! Expires July 31, 2013
*Valid only on orders shipped within the contiguous 48 United States. Offer only applies to Standard
UPS Ground Shipping Service. 125 lb. weight limit. Cannot be combined with any other offer.
We understand that you have many options in the marketplace, and are
pleased that you have made Enco your premier choice for Industrial Tools.
We want you to know that we truly value your business. Please enjoy
Free UPS Shipping on all orders of $99 or more!
USE PROMO CODE: PRSJUL
FREE UPS Shipping on
Orders of $99 or More!
Price Each
Case Model # LessThan Case
Size Qty. Fruit Punch Lemon-Lime Orange Glacier Freeze RipTide Rush Case Qty.
Instant Powder
8.5 oz. 40 RB890-7131 RB505-4175 RB505-4176 — RB319-5272 $1.99 $1.59
21 32 RB890-7133 RB505-4179 RB505-4180 RB319-5279 RB319-5280 4.26 3.39
51 14 RB890-7142 RB890-7140 RB890-7141 RB319-5282 RB319-5281 9.38 7.49
Wide-Mouth Bottles
20 24 RB319-5275 RB319-5277 RB319-5276 — — 1.72 1.39
Instant Thirst Quenchers
Provides Rapid Rehydration
Instant Powder Mixes
• 8.5 oz. yields 1 gallon
• 21 oz. yields 2.5 gallons
• 51 oz. yields 6 gallons
Instant Mixes
As Low As
$
159Each in
Case Qty.
• Rolls easily on two 5" wheels
• Head tilts 360° • 3-speed, rotary switch,
1-phase, 120v, 1⁄8 hp, sleeve-bearing,
permanently lubricated, totally enclosed
motor • 10' cord • 53" overall height
• Steel hub/spider and aluminum blades
• Double-locking, chrome-plated guards
• 1-year warranty
Roll-About Floor Fans
Blade cfm Wt. Reg. Sale
Size Hi/Med./Low Lbs. Model # Price Price
18" 5750/4700/3200 27 RB325-7337 $170.55 $109.00
24 6350/5200/3600 30 RB325-7357 219.93 155.00
Starting At
$
109
SAVEUP TO
36% FREE
PLUS
• Durable steel construction provides high-volume air
movement and powerful air delivery
• Sensitive cutoff protects from overheating • Easy to install
• Balanced blades for smooth, quiet operation • 120V
Blade Max. Low
Size HP CFM RPM Model # Price
20" 1⁄3 6,039 1,500 RB411-0119 $85.95
24 1⁄3 7,530 1,630 RB411-0118 125.95
30 1⁄4 6,145 1,050 RB411-0117 155.95
As Low As
$
8595
FREE
PLUS
Light-Duty 3-Speed Wall-Mounted Fans
Ideal for Industrial Use
Online: Enter the promo code on the shopping cart page and click apply.k
UPS Shipping on
Online: Enter the promo code on the shopping cart page and click apply.
FREE UPS Shipping on
02-03 CP 13-07 CustomerProspect.indd 102-03 CP 13-07 CustomerProspect.indd 1 6/19/13 10:14 AM6/19/13 10:14 AM

3INTERNET: use-enco.com FAX: 800-965-5857
Cool Savings On Hot Deals
Portable Water
Coolers
• OSHA compliant
• UV- and impact-resistant
HDPE exteriors
• FDA grade, stain-resistant,
easy cleaning liners
• Flow spout
Reg. Sale
Cap. Model # Price Price
2 gal. RB505-4183 $30.74 $26.95
3 RB505-4184 40.17 35.95
5 RB505-4185 46.04 40.95
10 RB505-4186 73.31 65.95
As Low As
$
2695
62 MAX Infrared Thermometer
• IP54 rated for dust and water resistance
• 3-meter (9.8') drop tested
• Large, backlit display
• Min./Max./Avg./Dif.
• Hi and Lo alarms
• Temperature range: -30˚ to 500˚C (-22˚ to 932˚F)
• Response time: <500 ms (95% of reading)
• Optical resolution: 10:1 (calculated at 90% energy)
• Display resolution: 0.1˚C (0.2˚F)
• Repeatability of readings
• Powered by a single AA battery
(10-hour life with laser
and backlight on)
Single Laser, 10:1 Spot
Low Price
Model # RB411-0124
$
9595
Commercial Light-Duty
Portable Blowers
• Steel housing with spiral-wire front
and rear guards
• 2-speed, 115V, 1 ph. motor
• Permanently lubricated, permanent split
capacitor
• 10' SJT-type, 3-conductor power cord
• Belt drive: 8" wheels; direct drive: 6" wheels
*Swivel model
Blade Low
Size HP Amps CFM Model # Price
Direct Drive
30" 1⁄2 3.3 9,100 RB411-0112* $295.95
36 2⁄3 4.5 11,200 RB411-0115 309.00
42 1 5.8 16,800 RB411-0113 395.00
Belt Drive
36 3⁄4 5 11,200 RB411-0110 395.00
42 1 6.5 17,600 RB411-0114 475.00
48 11⁄2 9 19,500 RB411-0111 575.00
Direct Drive
Swivel Model
Belt Drive Model
Starting At
$
29595
FREE
PLUS
Pivoting Floor & Table Fans
• 3 speeds
• 120V, 1 ph. motor
• Permanently lubricated
• ETL listed
• 7' cord length
• Table/Wall Fans: Base is
suitable for table, ﬂoor or
wall mount
Blade Mfr’s Low
Size CFM No Model # Price
OscillatingTable/Wall Fans
12" 930/780/620 3150G RB411-0120 $45.95
16 1392/1302/1142 3151G RB411-0121 50.00
Floor Fan
14 1650/1470/1180 9214GT RB411-0122* 85.95
*9' cord length
Floor Fan
Table Fan
Starting At
$
4595
FREE
PLUS
Industrial Floor Fans
• 3-speed, 1-phase, 120V motor
• 10' long, SJT-type, 3-conductor cord
• All-metal construction
• Chrome-plated, double-locking steel wire guards
• Fan rotates 360° for multi-directional use
Blade Low
Size HP CFM Model # Price
12" 1⁄12 1600/2200/2750 RB890-9977 $75.99
18 1⁄8 3200/4700/5750 RB890-9978 85.99
24 1⁄8 3600/5200/6350 RB890-9979 139.99
1-YEAR LIMITED
WARRANTYFREE
PLUS
Starting At
$
7599
02-03 CP 13-07 CustomerProspect.indd 202-03 CP 13-07 CustomerProspect.indd 2 6/19/13 10:14 AM6/19/13 10:14 AM

The RIGHT TOOL at the RIGHT PRICEThe RIGHT TOOL at the RIGHT PRICE4
Easy, Secure ShoppingVises & Clamps
Multi-Purpose Mechanic’s Vises
• Versatile, reversible front jaw • 360° swivel base with two lockdowns
• Replaceable, hardened steel top jaws —serrated and reversible to smooth
• Replaceable, hardened steel serrated pipe jaws are removable and
designed to securely grip pipe
Jaw Jaw Throat Pipe Wt. Low
Opening W Depth Capacity Lbs. Model # Price
6" 51⁄2" 33⁄4" 1⁄8-3" 50 RB404-1725 $118.95
11 61⁄2 4 1⁄8-31⁄2 53 RB404-1726 235.95
13 8 43⁄4 1⁄8-31⁄2 77 RB404-1727 335.95
As Low As
$
11895
• Designed for medium- to
high-volume CNC production
• Reversible jaws can be
changed from standard to step
• Anti-tilt mechanism eliminates lift of movable jaw
• Vise body is precision ground and the height
matched within +0
• Ductile cast-iron body, hardened upper guide
surface improves rigidity and wear resistance
• 6" jaw width • 4" jaw opening
• 5" OAH • 24" OAL • 11⁄2" jaw height
• Wt.: 110 lbs.
Double Direction
Precision Machine Vise
p
SAVE
40%
Sale Price
Model # RB327-5889
$
24995
Regular Price: $423.23
Swivel Base Vises
Bench Vise
• 51⁄4" jaw opening
• 5" jaw width
• 183⁄4" OAL
• 85⁄8" height
• 3⁄8" minimum pipe capacity
Mfr’s # 69999
Multi-Purpose Mechanic’s Vises
• Heavy duty – 30,000 psi rated
• Hardened steel top and pipe jaws
• Large anvil work surface
• Swivel bar rotates 360° and has double
lockdown for maximum stability
• Powder coat paint resists scratches
Jaw Jaw Throat Capacity Wt. Reg. Sale
Open. W Depth Min – Max. Lbs. Mfr’s # Model # Price Price
41⁄2" 4" 37⁄16" 1⁄4 – 2" 38 744 RB319-3258 $163.24 $105.95
51⁄4 5 33⁄4 1⁄4 – 21⁄2 52 745 RB319-3256 276.81 189.00
53⁄4 6 41⁄8 1⁄4 – 31⁄2 64 746 RB319-3259 327.10 245.95
6 51⁄2 33⁄4 1⁄8 – 3 50 14500 RB240-2993 181.53 169.00
81⁄4 8 43⁄4 1⁄4 – 31⁄2 89 748A RB319-3257 623.48 369.00
Industrial Vises
Jaw Jaw Capacity Wt. Reg. Sale
Open. W Min – Max. Lbs. Mfr’s # Model # Price Price
Utility
4" 41⁄2" 1⁄8 – 2" 16 674 RB240-2982 $85.41 $68.95
5 51⁄2 1⁄8 – 21⁄2 35 675 RB426-1020 119.92 85.95
51⁄2 61⁄2 1⁄8 – 21⁄2 44 676 RB426-1022 150.12 85.95
6 6 1⁄8 – 3 66 656HD RB426-1024 255.78 165.95
71⁄2 8 1⁄8 – 3 80 648HD RB426-1026 318.35 215.00
Tradesman
4 41⁄2 1⁄4 – 21⁄2 42 63199 RB426-1010 439.76 349.00
5 51⁄2 3⁄8 – 3 53 1755 RB426-1012 554.58 429.00
61⁄2 61⁄2 3⁄8 – 31⁄2 72 1765 RB426-1014 710.55 459.00
7 8 1⁄8 – 31⁄2 109 1780A RB240-2981 912.02 689.00
Utility
Tradesman
Sale Price
Model # RB405-0705
$
149Regular Price: $256.57
Starting At
$
10595
Starting At
$
6895Tradesman Vises
• 60,000 psi ductile iron body parts
• Hardened steel top and pipe jaws
• Round, lathe-turned slide bar
• Precision thrust bearing
Utility Workshop Vises
• Serrated steel replaceable top jaws
• Built-in pipe jaws
• Large anvil
• Finished in red enamel
Jaw Jaw Jaw Wt. Reg. Sale
W Open. Depth Ht. Lbs. Model # Price Price
3" 23⁄4" 1" 43⁄4" 12.6 RB404-1676 $74.19 $49.00
4 31⁄2 1.188 5 17.9 RB404-1677 84.22 62.00
5 55⁄16 15⁄16 55⁄16 23.8 RB404-1678 120.39 85.00
6 53⁄4 11⁄2 61⁄4 36.8 RB404-1679 151.90 112.00
• Used where quick and precise X and Y axis positioning is required
• Often used on a drill press to recreate lateral and cross travel of a
milling machine
• Suitable for clamping soft materials like wood, aluminum and copper
• Ball-crank handles
• Three bolt legs on each side of the base to match most table configurations
As Low As
$
49
Cross Slide Vises
Quick-Release
Welding Clamps
SAVEUP TO
30%
For quick clamping, without spinning. Ideal
for a wide range of welding and woodworking
applications, including inside clamping,
clamping of unparallel parts or holding round
or odd-shaped parts.
Import
• Material: Steel • Straight handle
• Non-marring pads and cushion handle grip
• Press button, slide clamp to desired position,
release button and turn handle to right to
tighten clamp jaws
• Load capacity: 200 lbs.
Gibraltar
• Material: Black oxide finish with copper-
plated spindle
• Resists welding splatter • T handle
• Lift release lever and pull handle to open jaws
• Push handle to desired position and flip
release lever down to tighten clamp jaws
• Load capacity: 1,000 lbs.
Open Closed
Max. Throat Throat Reg. Sale
Cap. OAL Depth Depth Model # Price Price
Import
5" 12" 21⁄2" 31⁄2" RB308-0336 $19.20 $15.95
61⁄2 131⁄2 21⁄2 4 RB308-0337 22.79 19.95
Gibraltar
5 10 21⁄4 3 RB327-0066 23.03 15.95
61⁄2 111⁄2 21⁄4 31⁄2 RB327-0067 27.38 21.49
T handleStraight handle
04-05 EH 13-07 V&C.indd 404-05 EH 13-07 V&C.indd 4 6/19/13 10:21 AM6/19/13 10:21 AM

PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.comPHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com 5
Online at use-enco.com Vises & Clamps
Reg. Sale
W JawW Ht. Model # Price Price
1" 3⁄8-3⁄4" .38" RB328-0106 $18.22 $10.95
11⁄2 1⁄2-7⁄8 .50 RB328-0107 18.22 10.95
Machine Vise
Work Stops
• Fits various brands of machine vises
• Steel body with 2 guide pins
• Spring-loaded work-stop
clamp for vises with a
minimum protrusion of 1⁄16"
Your Choice
$
1095
SAVE
39%
SAVEUP TO
32%
Milling Machine Vises
• 6" vise: bed height matched to size 2.875" ±.0005"
• 8" vise: bed height matched to size 3.310" ±.0005"
• Rigid main screw design allows for higher
torque loads and clamping force
• Repeatability within .001"
• Hardened vise bed
and jaw plate
• Limited lifetime warranty
Vise Jaw Jaw Jaw Max. Clamp. Wt. Mfr’s Sale
Size Width Ht. Opening W Ht. OAL Force Lbs. Model # List Price
6" 6" 1.75" 9" 83⁄4" 4.62" 17.2" 8200 lbs. 75 RB308-0101 $485.00 $395.00
8 8 2.20 11 111⁄2 5.51 21.81 12,000 210 RB328-0172 1,465.00 989.95
Starting At
$
395
SAVEUP TO
39%
Angle Vise
Precision Ground Drill
Press Vises
Can be used in four positions, horizontal,
left side, right side and on end. All sides
ground at 90˚ to adjacent side.
• Removable jaw inserts
• Jaws include horizontal and vertical
“V” grooves for holding rounds
• Holds irregularly shaped materials easily without
special ﬁxtures • Heavy cast construction
Throat Jaw Jaw Approx. Mfr’s Sale
Depth W Open. OAL Wt. Model # List Price
GroundVises
11⁄2" 21⁄2" 29⁄16" 7" 6 lbs. RB891-5993 $92.00 $55.95
13⁄4 3 31⁄8 8 10 RB891-5994 100.00 69.95
AngleVise
11⁄2 21⁄2 21⁄2 8 12 RB240-2902 100.00 75.95
Ground Vise
Starting At
$
5595
Deep Throat Forged
C-Clamps
With Perma Pads®
• Drop-forged steel frame
with extra-deep throat
for maximum clearance
• Acme roll-threaded screws
for maximum strength
Nom.
Throat Clamp. Screw Mfr’s Sale
Cap. D Pres. Dia. Model # List Price
0-21⁄8" 21⁄4" 3500 lbs. 9⁄16" RB337-1042 $18.00 $12.95
0-3 21⁄2 3500 9⁄16 RB337-1043 24.00 14.95
0-41⁄2 31⁄4 6200 3⁄4 RB240-0770 36.00 19.95
0-61⁄16 41⁄8 6600 3⁄4 RB240-0771 54.00 29.95
0-81⁄2 5 6900 3⁄4 RB240-0772 68.00 39.95
2-101⁄8 6 8000 3⁄4 RB337-1044 96.00 54.95
2-121⁄4 65⁄16 9300 7⁄8 RB337-1045 152.00 79.95
Starting At
$
1295
SAVEUP TO
47%
JointMaster
TM
Angle Joining Tools
Ideal for Quick Hold & Release on Wood, Metal or
Synthetic Materials
90° Fixed Angle
• Retractable plate for edge alignment
• V-grooves for securely holding round pieces
• Ideal for holding two pieces of different
thicknesses that require individual adjustments
90° Fixed Angle
30°-275°
Adjustable Angle
Throat Max. Reg. Sale
Depth Cap. Model # Price Price
90° Fixed Angle
2" 11⁄2" RB328-2124 $35.74 $26.95
3 3 RB328-2125 42.47 31.95
30°- 275° Angle
2 11⁄2 RB328-2122 38.55 28.95
3 3 RB328-2123 45.26 34.95
As Low As
$
2695
SAVEUP TO
24%30°-275° Adjustable Angle
• Simply adjust to the desired angle,
and “lock” into position using the handle
• Join round or ﬂat workpieces, or materials
with different thicknesses
Lock-Down
Design
Assures the
Movable Jaw
Won’t Lift!
FREE
PLUS
AngLock® Vises
D-688
Mfr’s # D-688
• Up to 7,968 lbs. clamping force
• Vise nut does not extend beyond the end of the vise body
• Hardened vise bed and jaw plates, and a semi-hard steel screw
• 80,000 psi ductile-iron body
Mfr’s # D-810
• Up to 11,596 lbs. clamping force
• Stationary jaw has a top-down, four-bolt design that reduces
vibration by 25%. Total disassembly of the vise allowed, without
having to remove the body from the machine table
D-810
Jaw Jaw Wt. Reg. Sale
W Opening OAL Lbs. Mfr’s # Model # Price Price
6" 8.8" 18.74" 78 D-688 RB990-1019 $567.94 $529.00
8 10 24.185 158 D-810 RB425-7682 1,541.84 1,439.00
Lifetime warranty against
manufacturer’s defects
Simply text Encotools and your
email address to 77053 to
sign up for Special Offers.
Msg & Data rates may apply. Email subscription only.
Text to Join
To: 77053
Encotools
your email address
04-05 EH 13-07 V&C.indd 504-05 EH 13-07 V&C.indd 5 6/19/13 10:21 AM6/19/13 10:21 AM

It’s IN STOCK andVises & Clamps
The strength of the castings, combined with the precision
round slide bar, gives this vise maximum clamping
power. Straight line design eliminates wear on the
spindle threads, and enclosed design keeps dirt and contaminants out.
• 60,000 psi stress parts
• Alloy steel slide bar
• Hardened steel jaw
inserts, replaceable
• Hardened milled
steel pipe jaws,
replaceable
Combination Pipe
& Bench Vises
*Truck Shipment
Jaw Max.Jaw Throat PipeCap. Wt. Mfr’s Sale
W Open. Depth Min. Max. Lbs. Mfr’s# Model# List Price
31⁄2" 5" 41⁄2" 1⁄8" 21⁄2" 52 C-0 RB404-2719 $880.00 $539.95
41⁄2 6 43⁄4 1⁄8 31⁄2 77 C-1 RB404-2720 1220.00 709.95
5 7 55⁄16 1⁄8 41⁄2 115 C-2 RB404-2721* 1,680.00 999.95
6 9 65⁄8 1⁄4 6 206 C-3 RB404-2722* 2,400.00 1,469.95
SAVEUP TO
40%
Cam Action Drill
Press Vises
• Applies variable clamping force depending
on the position of the cam locking lever
• Quick jaw positioning using slide bar handle
• Machined step jaws
• Four mounting locations
Jaw Jaw Throat Wt. Mfr’s Sale
W Opening D OAL Lbs. Model # List Price
3" 3" 11⁄4" 9" 10 RB240-2899 $200.00 $119.95
4 411⁄16 15⁄16 10 18 RB240-2900 220.00 145.95
6 63⁄16 113⁄16 12 34 RB240-2901 380.00 245.95
8 83⁄16 2 14 51 RB319-3058 480.00 309.95
Max. Max.
Jaw Cap. Mfr’s Sale
Mfr’s # Opening Lbs. Model # List Price
401 1" 350 RB505-4543 $11.79 $8.39
405 2 800 RB505-4544 14.27 10.99
407 21⁄2 700 RB505-4545* 15.70 11.79
410 3 1500 RB505-4546 20.38 15.99
415 41⁄2 1700 RB505-4547* 21.79 15.99
420 6 2000 RB505-4548 33.23 25.39
421 6 2000 RB505-4549* 36.25 26.99
430 9 2500 RB505-4550 96.25 69.99
435 10 3500 RB505-4551* 135.60 99.99
440 12 6000 RB505-4552 150.51 109.99
• Designed to eliminate
distortion and
prevent twisting
• High-tensile steel
• Built-in “V” blocks
• Floating jaws stay parallel
• Copper-plated handle, jaws,
and screw ideal for welding use
6 Pc. Set includes: 2 pieces each of the
21⁄2, 41⁄2 and 6" deep throat sizes.
T-Handle
Clamps
& Set
Sale Price
Model # RB505-6648
$
10995
6 Pc. Set
SAVEUP TO
28%
*Deep throat style
52 Pc. Combination
Steel Step Block &
Clamp Sets
Includes:
• 24 Studs: 4 pcs. each: 3, 4, 5, 6, 7 & 8" long
• 4 coupling nuts • 6 ﬂange nuts • 6 T-slot nuts
• 6 serrated end clamps • 6 step blocks
• 1 wall holder • step blocks 1" wide
Stud
Thread 1-Slot T-Slot Wt. Reg. Sale
Size Size NutW Lbs. Model # Price Price
3⁄8"-16 7⁄16" 11⁄16" 18 RB400-2438 $112.64 $65.95
3⁄8-16 1⁄2 7⁄8 23 RB400-2501 102.49 59.95
3⁄8-16 9⁄16 7⁄8 23 RB240-7207 115.69 65.95
1⁄2-13 9⁄16 7⁄8 23 RB400-2562 88.28 55.95
1⁄2-13 5⁄8 1 23 RB505-6544* 84.22 34.95
1⁄2-13 11⁄16 11⁄8 27 RB891-5756 97.42 55.95
5⁄8-11 11⁄16 11⁄8 29 RB400-2688 146.14 85.95
5⁄8-11 3⁄4 11⁄4 29 RB400-2751 147.15 79.95
SAVEUP TO
58%
*For Bridgeport -type milling machines
4-in-1 Clamping System
Includes Clamp, V-Pad & Extender Block
Clamp Clamping Reg. Sale
Size Pressure Model # Price Price
61⁄2" 1000 lbs. RB893-2203 $25.52 $19.99
81⁄2 1200 RB893-2151 30.67 21.99
121⁄2 1200 RB893-2152 36.76 28.99
101⁄2 2400 RB893-2153 49.18 37.99
121⁄2 2400 RB893-2154 73.05 57.99
1. Standard—The sliding
arm clamp is 10x
faster than a C-clamp!
2. Pipe—Add the
exclusive V-Pad to
create a pipe clamp!
3. Spreader—Slide the
clamp arm OFF and
reverse to create a
spreader clamp.
4. Step-Over—Add the
extender block to create
a step-over clamp.
• Push lever to slide clamping arm on and off
• Nickel/chrome-plated, heat-treated alloy steel
SAVEUP TO
28%
Starting At
$
1999
SAVEUP TO
38%
Max. Nominal Load
Stud Clamping Limit Reg. Sale
Size Range Length Lbs. Model # Price Price
Long for Longer Setups
3⁄8" 0-11⁄4" 31⁄2" 10,000 RB505-4639 $32.38 $23.95
1⁄2 0-21⁄2 53⁄4 12,800 RB505-4641 35.29 25.95
5⁄8 0-31⁄2 63⁄4 18,000 RB505-4643 42.82 28.95
3⁄4 0-5 9 24,000 RB505-4645 62.75 42.95
1 0-5 111⁄8 65,000 RB505-4646 103.11 62.95
Short for Closer Setups
3⁄8 0-1 3 14,000 RB505-4638 31.57 23.95
1⁄2 0-13⁄4 41⁄2 16,800 RB505-4640 34.32 25.95
5⁄8 0-23⁄4 51⁄2 24,000 RB505-4642 41.83 28.95
3⁄4 0-31⁄2 7 35,000 RB505-4644 61.75 42.95
Rite-Hite®
Hold-Down Clamps
• Instant adjustment up to 5" • Self-positioning
• For milling, drilling, stamping, etc.
• Use on any machine with a “T”-slot
As Low As
$
2395
06-07 EH 13-07 V&C_MTA.indd 606-07 EH 13-07 V&C_MTA.indd 6 6/19/13 10:22 AM6/19/13 10:22 AM

PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.comPHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com
Machine Tool Accessories
7
READY TO SHIP!
2-Piece Jaw
SAVE
21%On Chucks
3-Jaw Plain Back
Lathe Chucks
• Semi-steel body
• Self-centering .003" TIR
• Requires backplate (sold separately)
Chuck Thru Wt. Reg. Sale
Dia. Hole Lbs. Model # Price Price
1-Piece Jaw (Two Sets Included)
4" .860" 8 RB270-4072 $95.43 $81.95
5 1.180 12 RB270-4074 111.35 87.95
6 1.570 20 RB270-4076 133.18 103.95
2-Piece Jaw
10 3.150 55 RB270-4030 223.98 175.95
12 3.930 109 RB270-4035* 328.76 258.95
*Truck shipment
6" Chuck Dia. Backplate
1-Piece Jaw
As Low As
$
8195
Chuck Reg. Sale
Dia. Spindle Model # Price Price
6" D1-4 RB308-0123 $67.11 $54.95
8 D1-6 RB308-0125 131.84 109.95
10 D1-6 RB308-0126 169.25 133.95
10 D1-8 RB308-0127 179.69 142.95
12 D1-8 RB308-0128 217.58 156.95
Backplates (Some Machining Required)
SAVEOVER
15%• Lifting power 14 lbs.
(based on 1⁄2" steel)
• Trigger-release, hand-operated, 11⁄2" stroke plunger
• Handles hard-to-grip metal objects
• Easy-to-use, safe and practical time-saving device
• High-impact ABS plastic body
• Ceramic-type magnet in metal cup housing
(permanent power)
EZ Grip Magnet
Extended Length
Sale Price
Model # RB891-4092
$
2495
Can be mounted on any
flat machine surface or tool
crib for collet storage.
• Holder rotates with
finger touch for
easy selection
of sizes
• Collets are seated
firmly in angular
pockets without
loosening when
holder is rotated
• Molded of long-lasting A.B.S. plastic
• Contains 11 R8 collets: 1⁄8 to 3⁄4" by 16ths
SAVE
30%
R8 Collet Set with
Rotating Holder
Sale Price
Model # RB891-6076
$
6595
SAVEUP TO
37%
Tilting Tables
Set work at any angle.
• Machined T-slots
• Two screws to lock setting
• Heavy solid casting
• Graduated in degrees
• Sliding adjustment ±45° range
Overall Wt. Reg. Sale
W L Height Lbs. Model # Price Price
5" 7" 33⁄4" 20 RB418-4200 $127.68 $79.95
7 10 5 44 RB418-4202 192.92 129.95
10 15 61⁄2 92 RB418-4204 220.66 209.95
As Low As
$
7995
• 24-position hardened and ground index plate with six masking
plates for rapid indexing for divisions of 2, 3, 4, 6, 8 and 12
• 10-second vernier reading • Remove chuck to use as
horizontal/vertical rotary table • 360° graduation ring
• Includes scroll chuck with faceplate and 2 pc. reversible jaws
• Center ht.: 6.100" • Faceplate: 10" • Wt.: 166 lbs.
8" Super Spacer
Indexing Accuracy: 3 min.max.
Indexing Repeatability: 30 sec.
Squareness Base to Chuck: .0012" max.
Parall.of Chuck Face to Base: .0008"
Concent.of Mounting Flange: .0008"
Specifications Sale Price
Model # RB202-3030
$
84995
Regular Price: $1,166.67
R8 End Mill Holders
• Sizes 5⁄8" and up for single end mills only
• Hardened and groundReg. Sale
Bore Model # Price Price
3⁄16" RB210-0102 $26.11 $15.95
3⁄8 RB210-0104 26.11 15.95
1⁄2 RB210-0106 26.11 15.95
5⁄8 RB210-0108 27.11 16.95
3⁄4 RB210-0110 29.09 18.95
1 RB210-0114 31.14 18.95
11⁄4 RB210-0116 41.19 25.95
SAVEUP TO
39%
Starting At
$
1595
Specifications
Dialperrev.: .100" Travel: 8" longitudinal
T-slots: 5⁄8" 5" cross
Transverse: 5" Ht.: 41⁄2"
Base: 8x9"ovalw/U-slots Table: 51⁄2 x 12"
for up to 5⁄8" bolts Wt.: 36 lbs.
Compound
Slide Milling &
Drilling Table
• Heavy-duty
rugged slide for
positioning, milling,
drilling, microscope
viewing and staging
• Adjustable gibs for
heavy loads
Sale Price
Model # RB201-2826
$
SAVEOVER
40%
06-07 EH 13-07 V&C_MTA.indd 706-07 EH 13-07 V&C_MTA.indd 7 6/19/13 10:23 AM6/19/13 10:23 AM

The RIGHT TOOL at the RIGHT PRICEThe RIGHT TOOL at the RIGHT PRICE
8
Over 90,000 PRODUCTS Available
Key Jacobs Key Low
Size Equivalent Model # Price
S2A — RB325-1538 $2.94
S8 K30 RB240-3049 3.07
S9 K32 RB240-3050 2.83
S10 K3 RB240-3053 3.95
S13 K4 RB240-3052 19.17
S14 KG RB325-1450 2.94
S19 KK RB240-3051 3.07
Drill Chuck Keys
• Jaw and bodies hardened
and ground
• One piece gear/scroll
ring eliminates loss of
clamping torque
“T” “A” “D1” “D2” “D3” “D4” “L” “L3”
Style Threads Angle Knob Neck Hole Pilot Flange Reg. Sale
Dwg. Dia.Pitch Red. Dia. Dia. Dia. Dia. OAL Thick. Model # Price Price
BT-30
B M12 x 1.75 45° .428" .271" — .490" 1.699" .19" RB240-3098 $25.74 $12.95
BT-40
A M16 x 2 45 .740 .490 — .669 1.853 .23 RB619-3236 31.05 12.95
B M16 x 2 45 .589 .391 — .669 2.362 .23 RB240-3099 27.26 13.95
CT-40
A 5⁄8"-11 45 .740 .490 .281" .635 1.624 .12 RB308-0525 25.58 12.95
B 5⁄8-11 90 .589 .391 — .635 2.250 .23 RB619-3241 25.99 12.95
B 5⁄8-11 45 .589 .392 — .635 2.250 .24 RB240-3096 25.58 12.95
B 5⁄8-11 45 .589 .392 .200 .635 2.250 .24 RB308-0526 29.36 13.95
B 5⁄8-11 45 .588 .392 — .635 2.450 .24 RB619-3238 27.28 12.95
B 5⁄8-11 45 .589 .391 .635 2.310 .13 RB240-3097 24.94 12.95
C 5⁄8-11 75 .746 .550 .281 .635 2.060 .18 RB308-0527 29.36 12.95
CT-50
A 1-8 45 1.140 .820 .468 1.026 2.540 .20 RB240-3105 21.90 13.95
CNC Toolholder Retention Knobs
Style A Style B
Retention Knob Safety
Retention knobs do not last forever.
Your safety program must include
retention knob inspections. Knobs
must be visually inspected for damage
and checked for tightness every time
the tool in the holder is changed.
SAVEUP TO
58%
Style C
3 Pc. Drill Drift Set
• Hardened forgings
• For removing taper shanks
from sleeves or spindles
• Morse taper # 1, 2, 3 Low Price
Model # RB405-1895
$
664
Spill Master™
Avoid Messy & Costly Spills
Color Model #
Red RB891-5999
White RB891-6000
Blue RB825-0000
• Unique design prevents
spills — even when
turned completely
upside down!
• Complete with
applicator brush
Your Choice
$
499
Each
Length Ht. Open End Reg. Sale Webbed Reg. Sale
W 1st Face 2nd Face Model # Price Price Model # Price Price
3" 21⁄2" 2" — RB418-4510 $13.85 $7.99
31⁄2 3 21⁄2 — RB418-4515 16.73 8.99
41⁄2 31⁄2 3 RB418-4720 $24.87 $13.99 RB418-4520 20.06 10.99
6 5 41⁄2 RB418-4725 40.00 22.99 RB418-4525 30.62 17.99
7 51⁄2 41⁄2 RB418-4730 51.24 29.99 RB418-4530 37.31 21.99
8 6 5 RB418-4735 62.23 35.99 RB418-4535 49.78 28.99
9 7 6 RB418-4740 85.25 49.99 RB418-4540 69.44 40.99
10 8 6 RB418-4745 95.59 55.99 RB418-4545 87.65 50.99
12 9 8 RB418-4750 123.58 72.99 RB418-4550 98.18 57.99
Slotted Angle Plates
For setting up jigs and ﬁxtures on milling machines, drill presses, planing machines and radial drilling machines.
• Machined both square and parallel • High-tensile, cast-iron construction seasoned against distortion
• Webbed end machined on edges and outside surfaces only
• Slots are arranged for maximum clamping versatility
Open EndWebbed
As Low As
$
799
3 Jaw Plain Back
Self-Centering Scroll Lathe Chucks
Semi-Steel Body
Models w/Hardened Solid Jaws include:
• Scroll and jaws hardened and ground • Hard top jaws and master jaws
• Chuck wrench • Set of mounting screws
Models w/Reversible Jaws include:
• 2 sets of hard solid jaws for internal and external holding
• Balanced scroll jaws made of ﬁne alloy steel
Chuck Adapter Required.
Chuck Runout Thru Approx. Low
Dia. Radial Axial Hole Wt.Lbs. Model # Price
Hardened Solid Jaws
3" .0012" .0012" .629" 4 RB328-0327 $180.00
4 .0012 .0012 .866 7 RB328-0408 196.00
5 .0012 .0012 1.181 11 RB328-0410 210.00
6 .0012 .0012 1.575 19 RB328-1316 229.00
8 .0016 .0016 2.559 34 RB328-0426 280.00
10 .0016 .0016 3.149 57 RB328-0427 393.00
Hardened Reversible Jaws
5 .0012 .0012 1.181 12 RB328-0326 252.00
61⁄4 .0012 .0012 1.575 20 RB328-0321 280.00
8 .0016 .0016 2.559 31 RB328-0322 337.00
10 .0016 .0016 3.149 51 RB328-0323 486.00
12 .0024 .0024 3.937 101 RB328-0325 716.00
Starting At
$
180
NEW
LOW
PRICES
08-09 EH 13-07 MTA.indd 808-09 EH 13-07 MTA.indd 8 6/19/13 10:30 AM6/19/13 10:30 AM

9
Online at use-enco.com
SAVEUP TO
17%• Direct power transmission
gear and scroll for accurate,
vibration-free work
• Hardened and precision-ground
bodies and jaws
Key-Type Drill
Chucks
Mount/
Thread Key Mfr’s Sale
Capacity Size Size Model # List Price
1⁄64-1⁄4" 1JT S8 RB325-1499 $29.50 $24.99
1⁄32-3⁄8 3⁄8"-24 S8 RB325-1500 34.00 28.99
1⁄16-1⁄2 1⁄2"-20 S9 RB325-1535 43.50 35.99
1⁄32-3⁄8 2JT S9 RB325-1501 40.00 33.99
1⁄16-1⁄2 6JT S9 RB325-1502 43.50 35.99
1⁄16-1⁄2 3⁄8"-24 S9 RB325-1503 43.50 35.99
1⁄16-1⁄2 33JT S9 RB325-1537 43.50 35.99
1⁄16-1⁄2 2JT S9 RB325-1536 42.00 34.99
1⁄32-5⁄8 3JT S10 RB325-1505 63.00 52.99
3⁄16-3⁄4 3JT S13 RB325-1506 102.00 85.99
Made in
Germany!
Starting At
$
2499
SAVEUP TO
25%
Power Reg. Sale
Feed Axis Model # Price Price
Table x RB404-3045 $399.98 $299.95
Cross Saddle y RB404-3046 455.98 349.95
Knee z RB404-3047 455.98 349.95
Speciﬁcations
Speed Range: 1-9"/min.
RapidTraverse: 40"/min.
Gearing: Helical
Super Power Feeds
For Bridgeport®
-Type
Milling Machines
• 150 lbs. torque
• 110v with manual reset
• Auto cutoff • Pilot light
Starting At
$
29995
SAVE
15%
Range Reg. Sale
hp Model # Price Price
Medium-Duty
1⁄3-3⁄4 RB297-3510 $125.75 $105.95
3⁄4-11⁄2 RB297-3520 137.17 115.95
1-3 RB297-3530 160.04 135.95
3-5 RB297-3540 182.90 154.95
4-8 RB297-3550 217.19 183.95
Heavy-Duty
1⁄3-3⁄4 RB297-3700 160.04 135.95
3⁄4-11⁄2 RB297-3705 182.90 154.95
1-3 RB297-3715 205.77 173.95
3-5 RB297-3725 262.92 222.95
4-8 RB297-3735 308.65 261.95
8-12 RB297-3745 422.96 358.95
12-18 RB297-3755 703.10 596.95
Static Phase Converters
Run 3-Phase Equipment
From Single-Phase Power
• Simple to hook up
• Runs at 2⁄3 rated hp
• These units are non-returnable.
Ask our technical
staff for assistance
before ordering
PHASE-A-MATIC™
As Low As
$
10595
Rating Reg. Sale
hp Model # Price Price
1 RB297-3801 $553.85 $525.95
2 RB297-3802 664.62 630.95
3 RB297-3803 775.39 735.95
5 RB297-3805 996.93 946.95
71⁄2 RB297-3807 1,329.24 1,261.95
10 RB297-3809 1,772.32 1,682.95
15 RB297-3811 2,436.94 2,314.95
20 RB297-3813 2,880.02 2,735.95
For Heavily Loaded Applications
• Recommended for lathes • Runs at full power
• Multi-speed and multi-motor applications
• These units are non-returnable; ask
our technical staff for assistance
before ordering
Run 3-Phase
Equipment from
Single-Phase Power
PHASE-A-MATIC™
Rotary Phase Converters
1-YEAR LIMITED
WARRANTY
Starting At
$
52595
SAVE
22%
5C Spin Indexer (Jig)
• Designed to extend the work capabilities of surface grinders,
drill presses and all types of milling machines
• Accepts 5C collets to 11⁄8" capacity
• Indexing plate with precise 36-hole pattern
• 10 vernier holes for 1° indexing
• Spindle travels 21⁄16" for ﬂute grinding
• Hardened and ground spindle with lock
• 2-year guarantee
Sale Price
Model # RB505-2280
$
8998
Dividing spindle concentricity .0004"
Cylindrical center bore (per 1") concentricity .0012
Spindle center line parallelism to base .0008
Tolerances
SAVEUP TO
15%Qty.: 2+
Enclosed
Nominal Avg. Reg. Sale Price
Type Width Ht. Pull Lbs. Model # Price 1 2+
Standard 33⁄8" 33⁄8" 55 RB625-0125 $8.96 $7.95 $6.75
Adjustable 61⁄8 33⁄8 110 RB891-4168 17.90 15.79 13.49
Standard HD 33⁄4 43⁄8 75 RB891-5768† 18.31 16.19 13.69
Enclosed 33⁄4 43⁄8 75 RB505-4657*† 21.50 18.99 16.09
Welder’s Magnetic Squares
Use for welding, brazing, soldering & assembly
• Holds components in position for fast, simple setups
• Provides instant 90° or 45° angles
• Standard & Adjustable magnets adjust to any angle
*Feature weld splatter cover over magnet.†No air shipment
• Can also be used in automatic lathes
• Overall length: 21⁄2" • Capacity: .010 to .100"
• Includes pin chuck with three interchangeable collets
Pin Chuck Set
Sale Price
Model # RB891-5498
$
995
SAVE
39%
Milling Machine
Vise Work Stops
Versatile and
quick-mounting
work stop
permits fast,
completely
accurate
positioning of
repetitive work.
Fits Reg. Sale
Vise Model # Price Price
3 & 4" RB319-9643 $36.52 $29.95
5 & 6 RB891-5935 36.52 32.95
8 RB319-2878 57.83 56.98
As Low As
$
2995
p
w Asss
SAVEUP TO
18%

10
The Lowest Prices in the
SAVEUP TO
52%
• Wedge-type tool posts
are precision engineered to
ensure repetitive accuracy
• Interchangeable with Aloris
• Oversized T-nut can be
machined to fit any size lathe
6 Pc. Sets include
1 tool post and 5 holders:
• Style 1: Boring and facing on piston type,
turning and facing on wedge type
• Style 2: Boring, turning and facing
• Style 4: Boring, heavy-duty
• Style 7: Universal parting blade
• Style 10: Knurling, facing and turning
6 Pc. Quick Change Tool Post Sets
WedgeType
Piston Type
As Low As
$
18595
Lathe PistonType Reg. Sale WedgeType Reg. Sale
Series Swing Model # Price Price Model # Price Price
100 9-12" RB505-2253 $309.50 $187.95 RB890-9636 $383.76 $185.95
200 10-15 RB505-2172 355.62 215.95 RB890-9637 452.39 215.95
300 13-18 RB505-6543 447.90 271.95 RB890-9638 594.51 295.95
400 14-20 — RB890-9639 761.37 425.95
SAVEUP TO
35%
Single-Leverage Type
• Heavy-duty construction
• Front/side gib adjustment
• Steel pinions and rams
• Four-position anvil
• Palmgren includes
punch set for
specialized pressing
Arbor Presses
Tons of Max. Wt. Reg. Sale
Pressure WorkHt. Lbs. Model # Price Price
Enco
1⁄2 41⁄2" 25 RB805-1005 $50.74 $32.95
1 51⁄4 40 RB805-1010 61.31 49.95
3 121⁄2 160 RB805-1030* 159.21 129.95
Palmgren
1⁄2 41⁄2 25 RB890-8802 62.78 49.95
1 51⁄2 32 RB890-8803 86.31 69.95
2 8 68 RB890-8804 172.62 139.95
3 121⁄2 160 RB890-8805* 255.00 203.95
4 153⁄4 225 RB890-8806* 551.19 454.95
*Truck Shipment
As Low As
$
3295
R8 Round
Collet Sets
• Hardened and
ground throughout
• 7⁄16"-20 drawbar thread
Reg. Sale
Set Sizes Model # Price Price
6 Pc. 1⁄8-3⁄4" x 8ths RB231-4606 $28.80 $23.95
13 Pc. 1⁄8-7⁄8 x 16ths RB505-5022 115.93 69.95
Starting At
$
2395
SAVEUP TO
39%
SAVEUP TO
24%
End Mill Gage
Shank Nose Line to Mfr’s Sale
Dia. Dia. NoseEnd Model # List Price
1⁄8" .69" 1.75" RB240-3014 $132.00 $104.99
1⁄8 .69 2.5 RB240-3015 132.00 104.99
1⁄8 1 3 RB240-3016 144.00 114.99
3⁄16 .69 1.75 RB240-3017 112.00 89.99
3⁄16 .69 2.5 RB240-3018 112.00 89.99
1⁄4 .88 1.75 RB240-3019 112.00 89.99
1⁄4 .88 2.5 RB890-9748 112.00 89.99
1⁄4 1 3 RB240-3020 113.00 89.99
5⁄16 1 2.5 RB240-3021 102.00 79.99
3⁄8 1 1.75 RB240-3022 102.00 79.99
3⁄8 1 2.5 RB307-0770 102.00 79.99
1⁄2 1.75 1.75 RB240-3025 102.00 79.99
1⁄2 1.25 2.62 RB890-9749 102.00 79.99
1⁄2 1.25 4 RB240-3026 112.00 84.99
1⁄2 1.25 6 RB307-3353 132.00 104.99
5⁄8 1.75 1.75 RB240-3027 102.00 79.99
5⁄8 1.5 2.75 RB307-1737 102.00 79.99
3⁄4 1.75 1.75 RB240-3028 102.00 79.99
3⁄4 1.75 3 RB240-3029 102.00 79.99
3⁄4 1.75 3.5 RB307-1738 102.00 79.99
3⁄4 1.75 6 RB307-3354 125.00 99.99
1 2 1.75 RB240-3030 113.00 89.99
1 2 3 RB240-3031 113.00 89.99
1 2 4 RB307-1739 105.00 89.99
11⁄4 2.50 4 RB307-1740 119.00 94.99
V-Flange End Mill Holders
Caterpillar #40
• Through-spindle coolant capability
• End mill socket TIR .0002" or better to
insure best possible cutting tool life
• Constructed of alloy steel for long,
durable service life
• HRC 52-56
• Bright taper with
black-oxide finish to
prevent corrosion
• Meets ANSI specifications
As Low As
$
7999
Lathe Packages with Radius Dia. Mode
Reg. Sale
Travel Model # Price Price
6 x 36" RB319-9604 $1,486.75 $1,189.00
8 x 40 RB319-9614 1,532.35 1,189.00
8 x 60 RB319-9621 1,890.50 1,469.00
8 x 80 RB319-9631 2,247.70 1,649.00
10 x 60 RB319-9622 1,916.15 1,469.00
10 x 80 RB319-9632 2,294.25 1,689.00
12 x 120 RB319-9638 3,225.25 2,289.00
Machine Table Reg. Sale
Travel Size Model # Price Price
12 x 24" 8 x 30" RB319-3319 $1,224.55 $979.00
12 x 30 9 x 42 RB319-3309 1,220.75 979.00
12 x 36 9 x 49 RB319-3310 1,220.75 979.00
14 x 32 9 x 42 RB319-3320 1,272.05 979.00
16 x 36 10 x 54 RB319-3313 1,323.35 979.00
18 x 40 11 x 58 RB319-3312 1,323.35 979.00
Digital Readout Systems
For Lathes & Mills
Packages include:
• 20iM digital readout
• All mounting hardware
• Two high-precision scales
• Installation assistance
Mill Packages with Bolthole Cycle
Features:
• Easy-to-read display
• Resolution: .0002/.0005"
• 20-tool offset
• Bolthole cycle
• Radius/Diameter mode
• Taper calculation
5-YEAR MFR'S
WARRANTY

11
Industry GUARANTEED!
• 60° included angle
• For use in a drill chuck or collet
• Hardened point is inserted into the center
of the tapping handle or tap center
• The stroke of the center will follow the tap as it threads
the hole, assuring straight and accurate hand-tapped
threads
• One size can be used for all standard tapping applications
• 1⁄2" shank • 3⁄8" spring travel distance
Spring Center
Sale Price
Model # RB328-1923
$
1698
Morse Taper Solid Dead Centers
Bearing Steel or Carbon Steel
With 60˚ Included Angle
• Precision hardened and ground to closest tolerance
As Low As
$
368
Carbon Steel Bearing
Morse Hardened & Ground Low Steel Low
Taper OAL Model # Price Model # Price
1 35⁄16" RB251-3061 $3.68 RB251-3041 $13.17
2 43⁄16 RB251-3062 5.37 RB251-3042 14.93
3 415⁄16 RB251-3063 6.27 RB251-3043 20.91
4 65⁄16 RB251-3064 9.06 RB251-3044 31.08
5 81⁄2 RB251-3065 22.07 RB251-3045* 56.47
* OAL is 77⁄8"
SAVEUP TO
31%
4 Pc. Pin Vise Sets
• For holding small rods, wire, drills,
taps and other small tools
• Tool steel collets are hardened and grip
firmly when screw chuck is tightened
• Nickel-plated handle is hollow to permit
holding of long rods or wire
• Meets Government specs
Reg. Sale
Brand Capacity Model # Price Price
Import India 0-.187" RB830-0320 $14.74 $9.95
Import England 0-.150 RB891-6886 29.41 19.95
General 0-.187 RB891-5435* 61.89 45.95
As Low As
$
995
* Includes vinyl pouch
• Five-axis adjustment moves the stop to any
position your job requires
• 1⁄4" stop rod can be modified, replaced or
extended with a longer piece of bar stock
• Locking lever can be positioned
at 360° to avoid interference
• T-nut to fit 5⁄8" table slots
5-Axis Milling Stop
Low Price
Model # RB337-9322
$
9295
5C Collet Rack
• Holds up to 30 collets
• 18 gage steel
• Blue-baked-enamel finish
• Can be hung on wall or
can be set on workbench
• 91⁄2 x 12", .048" thick., 51⁄2" high at one end
and 21⁄2" at other end
• Wt.: 3 lbs
Low Price
Model # RB239-9030
$
995
Precision Live Centers
• Dust-, chip- and oil-proof mechanism with labyrinth packing and special oil seal
• Seal has a running-in period of approximately 250 hours, during which time
heating may be noticed — this is not detrimental to the center and will not
occur when the seal has been run-in
• Center is fitted with pre-loaded taper roller bearings
CNC Triple Bearing Live Centers
• Hardened and ground to 61-65 Rockwell • Concentricity within .0002"
Morse Low
Taper Model # Price
2 RB328-0164 $100.70
3 RB328-0165 109.63
4 RB328-0166 146.72
5 RB328-0167 186.48
Starting At
$
5567
Morse Point Load Max. Low
Taper OD Dia. OAL Cap. rpm Model # Price
1 1.339" 0.669" 4.528" 200 lbs. 6700 RB328-0158 $55.67
2 1.457 0.866 4.921 600 6400 RB328-0159 80.02
3 1.850 1.181 6.417 900 5000 RB328-0160 100.52
4 2.165 1.378 7.598 1800 4100 RB328-0161 124.21
5 2.756 1.772 9.449 3000 3400 RB328-0162 176.95
6 3.544 2.362 12.598 7500 2700 RB328-0163 282.26
CNC
NEW
LOW
PRICES

12
FAST & FRIENDLY Customer
SAVEUP TO
22%On Qty.: 4+
Neoprene Mounts
Thick, non-skid, neoprene cushion provides friction
and resists oil. No bolting to ﬂoor required.
• Isolates impact and vibration
• Zinc-plated hardware
• Steel load transfer plate
• Cutoff stud ﬁts in blind base holes
• 1" leveling range • Locks to machine
Load Range Base Bolt Usable Sale Price Each
Per Mount Dia. Thick. Dia. Bolt L Model # 1-3 4+
50-250 lbs. 23⁄8" 3⁄4" 3⁄8"-16 3" RB325-6627 $8.53 $6.79
250-500 3 7⁄8 1⁄2-13 4 RB325-6629 11.95 9.29
500-1000 33⁄8 1 1⁄2-13 4 RB325-6615 13.95 10.99
1000-2000 5 11⁄4 5⁄8-11 5 RB325-6626 22.95 18.49
2000-4000 63⁄4 13⁄8 5⁄8-11 6 RB325-6628 52.95 42.29
As Low As
$
679Each
Qty.: 4+
SAVEUP TO
22%• Supplied with chuck key
Chucks
Taper Mounted
Thread Mounted
*Smooth sleeve
Medium-Duty Thread Mounted Chucks
Capacity Range Mount Mfr’s Sale
Mfr’s # Min./Max. Thread Key # Model # List Price
1B 3⁄8 .040/.250" 1/6.5mm 3⁄8"-24 K1 RB290-1404* $56.51 $45.00
2BA 3⁄8 .040/.375 1/10 3⁄8-24 K2 RB290-1400 75.83 59.00
41BA 3⁄8F .040/.375 1/10 3⁄8-24 K30 RB240-2825 67.02 52.00
33BA 1⁄2 .08/.500 2/13 1⁄2-20 K32 RB290-1408 78.15 61.00
33BA 3⁄8 .08/.500 2/13 3⁄8-24 K32 RB290-1406 81.56 63.00
33BA 5⁄8 .08/.500 2/13 5⁄8-16 K32 RB290-1412 81.45 63.00
• For extra heavy-duty drilling applications on production drilling machines,
radials, jig borers, mills and lathes • Supplied with a chuck key
• The world’s most accurate key-type chuck for close-tolerance drilling • The ball-thrust bearing
reduces friction in the closing mechanism, for greater tightening on the twist drill shank
Ball-Bearing Super Chucks
Capacity Range Tapered Mfr’s Sale
Mfr’s # Min./Max. Mount Key # Model # List Price
81⁄2N .040/.250" 2JTS K30 RB505-2191 $103.03 $80.00
16N .125/.625 3/16mm 3JT K4 RB505-8005 184.26 143.00
18N .125/.750 3/19 4JT K4v RB505-8006 277.12 216.00 Super Chuck
Starting At
$
45
Capacity Range Tapered Mfr’s Sale
Mfr’s # Min./Max. Mount Key # Model # List Price
Medium-Duty
33 .08/.500" 2/13mm 33JT K32 RB505-2189 $86.18 $67.00
Heavy-Duty
3A .125/.625 3/16 3JT K3 RB290-1320 124.81 97.00
34-02 .040/.500 1/13 2JT K3 RB290-1329 78.00 60.00
34-06 .040/.500 1/13 6JT K3 RB290-1330 104.09 81.00
Plain Bearing Taper-Mounted Drill Chucks
SAVEOVER
25%
3 Pc. 5C Collet Set
Includes:
• Adjustable Collet Stop with fully threaded
adjustment screw
• Collet Stop Wrench which mates perfectly
with collet and keyway of collet
• 3" Collet Stop Extension Tube. Two or more tubes
can be coupled for any length to stop desired
Sale Price
Model # RB328-0185
$
3595
Quill-Feed
Speed Handles
For Bridgeport-Type
Mills Only
• Spring pushes pin back from quill-feed
actuation up or down
• Heavy-duty construction
• 1" bore
SAVE
28%
Sale Price
Model # RB505-2171
$
2599
Low
Description Model # Price
Single Position RB337-9316 $10.89
Double Position RB337-9317 19.95
Quickie Vise Handles
• Fits all 6" vises with 3⁄4" hex
• Machined anodized aluminum
As Low As
$
1089
m
NEW
LOW
PRICE
Plastic CNC
Tool Racks
Holds 10 Tools
• 16L x 7W x 5"H
• Portable
Taper Size Model #
CAT-30 RB327-4083
CAT-40 RB327-4084
Your Choice
$
1995
SAVEOVER
35%

13
Service 800-USE-ENCO
SAVEUP TO
39%
• 4" table utilizes low-profile locks for added workspace
• 10-second vernier reading • Gear drive immersed in oil
• Extra-deep coolant channel • Dual positive-action locks
• Satin-chrome dials • 90:1 gear ratio • Low profile
Accessory
Table Reg. Sale
Dia. Model # Price Price
Tailstocks for Hor./Vert.Tables
8 & 10" RB200-1098 $218.13 $115.95
Rotary Tables
*ShipsTruck Freight
Table Ht.O/A Center Morse T-Slot Approx. Reg. Sale
Dia. Horiz. Vert. Taper W Wt.Lbs. Model # Price Price
Horizontal/Vertical RotaryTables
8" 3.94" 5.98" 3 .465" 95 RB200-1143 $455.61 $289.95
10 4.33 6.75 3 .465 137 RB200-1153* 594.12 359.95
Horizontal RotaryTables
6 3.2 — 2 .390 42 RB200-1076 311.97 209.95
8 4.1 — 3 .465 55 RB200-1078 386.37 279.95
10 4.5 — 3 .465 82 RB200-1080 436.80 299.95
12 5.3 — 4 .545 168 RB200-1082* 759.42 479.95
Specifications Max. Variation
Flatness of Clamping Surface (Concave): .0006"
Concentricity of Center Bore: .0008"
Parallelism of Clamping Surface to Angle Face: .0008"
SquarenessofAngleSurfacetoClampingSurface(Hor./Vert.only): .0004"
Squareness of Clamping Surface to Center Slot: .0008"
Accuracy:
4, 6 & 8"Table 1 min. 20 sec.
10, 12 & 16"Table 45 sec.
As Low As
$
20995
Toolholding Fixtures
• Change end mills, drills, collets and
retention knobs quickly and securely
• Made from 6061 anodized
aluminum with steel key
• 4 Counterbored screw holes on base for mounting
on workbench, toolbox or side of machine
• Can be assembled for horizontal
or vertical use
• Base length: 4"
• Adjustable handle can be lifted and
turned to any position
For CAT or BT Toolholders
Reg. Sale
Taper Model # Price Price
CAT40 & BT40 RB404-1522 $99.34 $75.95
CAT50 RB404-1524 103.53 85.95
SAVEUP TO
23%
Starting At
$
7595
SAVE
25%
Parallel Separator
• Spring-loaded parallel
separator holds parallels
securely in place
• Can be used on vises
up to 6" jaw width
Sale Price
Model # RB328-0100
$
3995
SAVEUP TO
29%
CAT V-Flange
Collet Chucks
ER Collet Series
• Constructed of alloy steel for long,
durable service life
• Hardened to RC 52-56 for long service life
• Shiny taper with black-oxide finish for the best
combination of accuracy and durability
• Through-spindle
coolant capability
Collet Collet Mfr’s Sale
Series Size Proj. Model # List Price
CAT 40
ER-16 .020-.433" 2.5" RB308-0276 $191.00 $133.99
ER-16 .020-.433 3 RB308-0277 180.00 126.99
ER-16 .020-.433 5 RB308-0278 201.00 141.99
ER-20 .039-.511 3 RB308-0279 184.00 130.99
ER-20 .039-.511 4 RB308-0280 188.00 132.99
ER-20 .039-.511 6 RB307-0777 204.00 143.99
ER-25 .039-.629 2 RB308-0282 184.00 130.99
ER-25 .039-.629 4 RB308-0283 193.00 135.99
ER-25 .039-.629 6 RB308-0284 221.00 156.99
ER-32 .078-.787 3 RB308-0285 191.00 133.99
ER-32 .078-.787 4 RB308-0286 193.00 135.99
ER-32 .078-.787 6 RB308-0287 210.00 148.99
ER-40 .118-1.181 4 RB308-0288 193.00 135.99
ER-40 .118-1.181 6 RB308-0289 221.00 156.99
CAT 50
ER-16 .020-.433 4 RB308-0290 203.00 145.99
ER-16 .020-.433 6 RB308-0291 215.00 154.99
ER-20 .039-.511 4 RB308-0292 217.00 156.99
ER-20 .039-.511 6 RB308-0293 235.00 168.99
ER-20 .039-.511 8 RB308-0294 261.00 187.99
ER-25 .039-.629 4 RB308-0295 221.00 158.99
ER-25 .039-.629 6 RB308-0296 238.00 171.99
ER-32 .078-.787 4 RB308-0297 224.00 159.99
ER-32 .078-.787 6 RB308-0298 240.00 172.99
ER-40 .118-1.181 4 RB308-0301 254.00 182.99
ER-40 .118-1.181 6 RB308-0300 280.00 201.99
Starting At
$
12699
SAVE
25%
Avg.Pull Reg. Sale
Dia. Lbs. Model # Price Price
113⁄64" 7 RB891-8105 $4.00 $2.99
17⁄16 11 RB890-9756 4.00 2.99
21⁄32 19 RB325-6892 4.00 2.99
• Does not mark or tear paper
• Magnetic strength holds through
many layers of print
• Ideal for holding papers, prints and charts
against partitions, machinery and metal desks
Round Magnetic
Print Holders Your Choice
$
299

14
Ask the Enco Tech Team to help
SAVEOVER
20%
Keyless Drill Chucks with
Integral Shank
• Integral shank design is more
compact than a combined drill
chuck and arbor, resulting in
greater accuracy and rigidity
• Self-tightening
(clockwise rotation only)
• Max. rpm: 7000
• Cap.: 1⁄32-1⁄2"
• Diameter: 2"
• Precision balanced
Chuck Shank Mfr’s Sale
Model Type Model # List Price
CP130-5⁄8 5⁄8" SS RB890-9230 $339.00 $259.95
CP130-R8 R8 RB890-9226 374.00 287.95
CP130-2MT 2MT RB890-9227 340.00 259.95
CP130-3MT 3MT RB890-9228 342.00 263.95
CP130-4MT 4MT RB890-9229 361.00 278.95
As Low As
$
25995
Wt. Reg. Sale
Description L Ht. W Lbs. Model # Price Price
Hand-held
Demagnetizer/magnetizer 9" 1" — 3 RB285-2520 $69.00 $39.95
Demagnetizer 63⁄4 31⁄2 41⁄4" 11 RB285-2505 69.00 39.95
Demagnetizers
Quickly Demagnetize Tools
by Drawing Across Surface
• 110 volt, on/off switch
Your Choice
$
3995
SAVEOVER
40%
Reg. Sale
Size Model # Price Price
30 & R8 RB240-3152 $107.57 $82.95
40 & 5C RB240-3153 127.87 94.49
50 RB240-3154 218.20 159.95
Spindle Socket Cleaning Tool Sets
For Milling/Drilling/Boring/Grinding Machines
• Cleans socket with a twist of the wrist while spindle is stationary
• Quickly removes chips and foreign matter
• Prevents malfunctioning of automatic tool changers when
dirt and varnish build-up inhibit tool release
• Special compounded blade cleans like a “squeegee”
for improved spindle performance
• Compressed air, rags not required
Includes: Holder, set of ST-Black and set of VR-Yellow replacement blades.
Starting At
$
8295
nary
ment blades
SAVEUP TO
25%
SAVEOVER
20%
Classic Keyless Drill Chucks
Heavy-Duty Taper Mounted
• “The World’s Most Accurate Keyless Drill Chuck”
• Widely used today on the finest precision
drilling machinery where close tolerance
drilling is essential
• Hardened alloy steel working parts
• Use on high-accuracy drill presses, jig borers,
milling machines and production drilling equipment
• Model 15J0 keyless drill chuck is especially designed for
holding small diameter twist drills and has a micrometer
graduation to change the smallest drills
Jacobs Mfr’s Sale
Mfr’s # Capacity Taper rpm Model # List Price
15J0 0-1⁄16" 0 50,000 RB290-1230 $277.00 $213.99
30J0 0-1⁄8 0 35,000 RB290-1235 225.00 172.95
30J1 0-1⁄8 1 35,000 RB290-1240 225.00 172.95
50J1 0-3⁄16 1 25,000 RB505-2198 227.00 175.00
65J1 0-1⁄4 1 20,000 RB290-1250 244.00 189.00
100J33 0-3⁄8 33 12,000 RB290-1255 277.00 214.00
100J2 0-3⁄8 2 12,000 RB290-1260 277.00 214.00
130J33 1⁄32-1⁄2 33 7000 RB290-1265 307.00 237.95
130J2 1⁄32-1⁄2 2 7000 RB290-1270 307.00 237.95
130J6 1⁄32-1⁄2 6 7000 RB290-1275 307.00 237.95
160J6 1⁄8-5⁄8 6 4000 RB290-1280 347.00 267.95
As Low As
$
17295
R8 13 Pc. Collet Set & Tool Tray
• Sturdy aluminum casting does not scratch
• 2 rows with holes under 1"
• Attaches to any milling machine by
2 screws (included)
• Design of tray permits dirt and chips to fall through
• Dimensions: approximately 14W x 9"D
• Includes 1⁄8 to 7⁄8" by 16ths collets • Tray holds 15 collets
Sale Price
Model # RB240-3180
$
6595
Sale Price
Model # RB411-0092
$
1395
Quick and Easy—Just stop, lock, remove
and you’re ready to machine!
• For CNC or manual lathes whether manually
pulling a bar through a collet/chuck or using a
bar puller (first pull for each bar)
• Gage lengths up to 51⁄2" long
• Can be used on all stock shapes up to 3" round
• Self-centering, unobstructed viewing
• Change dull drills (up to 3⁄4" dia.) in your turret
• Mill both sides of your
stock without a stop
in the way
• Also a ruler for
visual reference
C Collet/Chuck Stop
Lathe & Mill Vise Tool
SAVE
43%
Boring Head with
R8 Shank
• Rugged construction for smooth, chatter-free operation
• Precision boring head with integrated R8 shank
• 21⁄2" head with 3⁄4" offset travel
• 1⁄2" diameter vertical
and cross holes
• Black-oxide finish
• .001" direct reading
micrometer dial
Sale Price
Model # RB328-0184
$
7595
RB285-2520
RB285-2505
14-15 EH 13-07 MTA_DP.indd 1414-15 EH 13-07 MTA_DP.indd 14 6/19/13 11:15 AM6/19/13 11:15 AM

you select the Right Machine! Drill Presses
Specifications
Swing: 20"
Capacity: 11⁄4" Mild Steel
SpindleTravel: 61⁄2"
Spindle to Base: 483⁄8" Max.
Table Size: 22 x 19"
Column Dia.: 4"
Quill Dia.: 3"
Horsepower: 11⁄2
Overall Height: 741⁄2"
OverallWidth: 22"
Overall Depth: 36"
• 300 - 2000 RPM, 61⁄2" spindle travel • Heavy base with ground surface
• 3 MT with drawbar (can accept 3 MT tang tooling) • 5⁄8" Table T-Slots
• Quick speed changes, easy table adjustment • Positive depth control
20" Infinitely Variable Speed Drill Presses
*Quill feeds:0.004,0.006,0.008" per Rev. †Spindle travel:41⁄4"
Reg. Low
Description Wt. Model # Price Price
11⁄2 HP, 220V, 1Ph. 750 lbs. RB126-2655 $2,533.42 $2,400.00
11⁄2 HP, 220V, 3Ph. 750 RB126-2665 2,533.42 2,189.95
11⁄2 HP, 220V, 3 Ph.with Auto Quill Feed 750 RB126-2675*† 2,955.66 2,659.95
As Low As
$
2,18995
SAVEUP TO
13%
1 year limited warranty!
Specifications
Swing: 45⁄16"
Drilling Capacity: 1⁄4"
Speeds (No.) Range: (3) 5000, 6500, & 8500 rpm
SpindleTaper: JT1
Chuck Capacity: 1⁄4"
Overall Height: 153⁄4"
Base Size (L xW): 93⁄8" x 611⁄16"
Voltage: 115
ShipWt.: 10 lbs.
• Great for circuit board work
• For use with drills under 1⁄4"
Miniature Drill Press
Sale Price
Model # RB328-6573
$
14998
SAVEOVER
10%
Drill Presses
Bench & Floor Models
• All models include drill chuck plus drill chuck arbor
on floor models
• Motor and electrics: 1⁄2 HP, 115/230V, 1 ph.
(1 HP, 120V, 1 ph. on 211⁄8" model)
• Table T-slots: 1⁄2" (3⁄4" on 211⁄8" model)
• Table tilt: 45° (40° on 211⁄8" model)
Bench Model
Floor Model
Specifications Bench Models Floor Models
Swing: 10" 13" 133⁄4" 17" 211⁄8"
Drilling capacity: 1⁄2" 5⁄8" 5⁄8" 3⁄4" 1"
Spindle taper: 33JT 2 MT 2 MT 2 MT 3 MT
Quill travel: 23⁄8" 31⁄8" 31⁄8" 31⁄4" 413⁄16"
Chuck capacity: 1⁄2" 5⁄8" 5⁄8" 5⁄8" 5⁄8”
No.of speeds/RPM range: 5/680-3160 16/250-3000 16/210-3600 16/240-3380 12/180-4200
Overall height: 295⁄16" 393⁄8" 621⁄2" 64" 70"
Table size: 77⁄8 x 77⁄8" 117⁄16" Dia. 9 x 9" 111⁄2 x 111⁄2" 185⁄8 x 161⁄8"
Column diameter: 23⁄8" 27⁄8" 27⁄8" 31⁄8" 35⁄8"
Base size: 131⁄8 x 8" 175⁄16 x 97⁄8" 173⁄4 x 101⁄2" 195⁄8 x 117⁄8" 221⁄2 x 191⁄2"
Approx.wt.: 73 lbs. 89 lbs. 121 lbs. 187 lbs. 324 lbs.
Order # RB327-5882 RB308-0056 RB308-0058 RB308-0059 RB308-0060
Reg.Price $329.76 $439.23 $516.98 $659.98 $1,011.98
Sale Price $259.95 $339.95 $329.95 $459.95 $869.95
As Low As
$
25995 SAVEUP TO
36%
14-15 EH 13-07 MTA_DP.indd 1514-15 EH 13-07 MTA_DP.indd 15 6/19/13 11:15 AM6/19/13 11:15 AM

Machinery ManualsMetal Fabricating
SAVEUP TO
41%
Hydraulic Presses
Cap. Base Wt. Reg. Sale
Description Tons Stroke W Height Lbs. Model # Price Price
Bench Model 12 6" 20" 37" 155 RB240-7754 $326.95 $219.00
Floor Model 12 6 24 613⁄4 190 RB890-0829 587.95 349.00
Floor Model 20 7 32 67 265 RB890-0830 713.95 425.00
Floor Model 50 63⁄4 38 73 600 RB890-0831 2,374.95 1,399.00
• All welded-steel construction
• Heavy-duty return springs for fast ram retraction
• Includes bed plates and bearing punch
• 50 ton unit is used to press,
straighten, bend or remove
and install gears and bearings
Starting At
$
219
SAVEUP TO
18%Blade Handle Wt. Reg. Sale
L L Lbs. Model # Price Price
6" 28" 40 RB130-5710 $85.76 $69.95
12 39.5 100 RB130-5700 133.66 119.95
Speciﬁcations
Blade L: Cap.Round: Flat Bar: Plates:
6" 3⁄8" 23⁄4 x 1⁄4" 3⁄32"
12 7⁄16 23⁄4 x 1⁄4 1⁄8
• Compound leverage
for easy operation
• Long handle provides plenty
of shearing torque
• Tool steel blades for long life
• Mounts directly to
your workbench
Bench Top Shears
Cuts Sheet Steel, Bars & Rods
As Low As
$
6995
SAVEUP TO
19%
Dia.of Min. Wt. Reg. Sale
Description Rolls Radius Lbs. Model # Price Price
24" x 20 Gauge 2" 1" 195 RB130-4501 $439.09 $395.95
36" x 22 Gauge 2 1 273 RB130-4511 483.80 409.95
50" x 16 Gauge 3 11⁄2 528 RB130-5501 997.43 799.95
• Maximum gauge capacity is
applicable when using mild steel
• Using galvanized steel lowers
maximum gauge capacity
Shown with Stand,
sold separately.
Slip Rolls
Starting At
$
39595
1-YEAR LIMITED
WARRANTY
Reg. Sale
Description Model # Price Price
Stand (56" x 17" x 24") RB130-5075 $219.98 $179.95
Stand for 50" x 16 Gauge Slip Roll
40 Ton Ironworkers Fabrication Machine
SAVE$
511
Features:
• Punches, shears, notches, bends and forms
• 110v AC, 1 ph.
• All guarding complies with ANSI B11-5 standards
• Meets American National Safety standards for ironworkers
Standard Equipment:
• 2" die holder • Punch retaining nut and stripper
• Power cavity includes 3-in-1 shear
Mfr’s # MP4000
Accessories
Reg. Sale
Description Dimensions Mfr’s # Model # Price Price
Brake for MP4000 8" MP4110 RB890-0444 $746.27 $579.00
Notcher - Heavy-Duty 2 x 13⁄4" MP4120 RB890-0445 746.27 579.00
5 Pc.Round Punch Starter Set 1⁄4, 3⁄8, 1⁄2, 5⁄8, 3⁄4" MP4140 RB890-0447 209.20 159.00
Speciﬁcations
Rated on 65,000 psiTensile
Speed:
spm Approx.4-6
Motor: 3⁄4 hp, 110v, 1 ph.
Throat Depth: 33⁄4"
Punch Capacity: 40Tons
Pipe Notchers: 1⁄2, 3⁄4, 1, 11⁄2, 2"
Shear:
Flat Bar: 3⁄8" x 4" and 1⁄4" x 6"
Angle: 1⁄4" x 3" x 3"
Rod: 3⁄4"
Square: 5⁄8"
Hydraulics: 2500 psi
Oil Capacity: 1 US Gallon
Dimensions: 24W x 551⁄4H x 30"L
Weight: 410 lbs.
Sale Price
Model # RB890-0442
$
2,595Regular Price: $3,106.77
1-YEAR LIMITED
WARRANTY
1-YEAR LIMITED
WARRANTY
Starting At
$
3,14995
SAVEUP TO
$
743
52" Hydraulic &
Pneumatic Shears
16 Gauge Capacity (mild steel)
• Guarded foot switch
• 3 hp, 220v
• Cap. back gauge—27"
• Cap. front gauge—26"
Wt. Reg. Sale
Description spm Lbs. Model # Price Price
Pneumatic 25 1,155 RB130-5355 $3,707.98 $3,149.95
Hydraulic 60 1,350 RB130-5345 4,943.98 4,200.00
16-17 EH 13-07 MetFab.indd 1616-17 EH 13-07 MetFab.indd 16 6/19/13 11:16 AM6/19/13 11:16 AM

Online at use-enco.com Metal Fabricating
SAVEOVER
10%On Notcher
4 Ton
Hand Notcher
Notch Any Shearable Material
• Heavy-duty blades
Specifications
Mild Steel Cap.: 16 Gauge Max.Notch: 6" x 6" x 90°
Stroke: 3⁄4"
Stainless Cap.: 20 Gauge Table Size: 171⁄2 x 12"
Stand sold separately
Stand
Model # RB130-5115
Low Price:$199.99
Sale Price
Model # RB130-5110
$
SAVE
23%
50" x 16 Gauge Power Roll
Specifications
Motor: 220v*, 3 ph., 3⁄4 hp Roll Speed: 22 rpm
Capacity: 16 gauge Min.Radius: 1.5"
Roll Dia.: 3" Weight: 880 lbs.
*Can be rewired to 440v
1-YEAR
LIMITED
WARRANTY
Sale Price
Model # RB130-5510
$
2,200Regular Price: $2,857.78
SAVEUP TO
35%
Work Wt. Press Reg. Sale
Ton Range Lbs. Style Model # Price Price
6 0-8" 68.2 H RB307-0121 $167.12 $119.95
30 0-34 286 HYC RB307-0126 929.06 599.95
45 0-31 693 HYC RB307-0125 1,119.40 849.95
Style HYC
• Use for aligning jobs, such as straightening
crankshaft and connecting rod
• Great for press fit, such as pressing in
and out of shaft pin, gear and bushing
• Use for die press and punch press processing
Hydraulic
Shop Presses
Style H
Starting At
$
11995
Sheet Metal Pan
& Box Brakes
Wt. Reg. Sale
Model Gauge Lbs. Model # Price Price
Bench 22 280 RB130-5051 $529.13 $449.00
Bench 16 309 RB130-5061 716.54 609.00
Floor 12 1525 RB130-5234 1,998.98 1,799.00
Stand 64 RB130-5075 219.98 179.95
• Steel fingers can be removed or
repositioned for custom metal work
• Model #RB130-5061 includes counterbalance
RB130-5051
As Low As
$
449
Specifications RB130-5051 RB130-5061 RB130-5234
Mild Steel Cap.: 22 Gauge 16 Gauge 12 Gauge
Stainless Cap.: 26 Gauge 20 Gauge 16 Gauge
Max.Beam Lift: 7⁄8" 11⁄4" 11⁄2"
Max.Bend L: 481⁄4" 481⁄4" 481⁄4"
Min.Reverse Bend: 5⁄16" 5⁄16" 1⁄2"
FingerWidth: 2, 3, 4" 2, 3, 4" 3, 4, 5"
No.of Fingers: 16 16 10
Max.Box Depth: 3" 3" 4"
Beam Adjustment: 0-1⁄8" 0-1⁄2" 0-1⁄2"
SAVEUP TO
18%
Pipe Bender
12 Tons of Hydraulic Power
• Easy, lower cost way to bend pipe,
conduit, tubing, I-beam and channel steel
• Bends up to 2" schedule 40 pipe or 4" I-beam
• 110v AC, plugs into standard 20 amp outlet
• 2500 psi • Wt.: 250 lbs.
Sale Price
Model # RB890-0434
$
1,79999
SAVEOVER
$
260On 6 Pc. Set
Accessories
Individual Pipe Dies
Bend Reg. Sale
Size Radius Model # Price Price
1⁄2" 2.94" RB890-0435 $151.39 $105.00
3⁄4 3.68 RB890-0436 173.04 119.00
1 4.55 RB890-0437 216.28 148.00
11⁄4 5.81 RB890-0438 251.71 179.00
11⁄2 6.65 RB890-0439 307.76 209.00
2 8.31 RB890-0440 373.13 255.00
6 Pc.90° Pipe Die Set
• Precision machined, cold drawn,
1018 steel for long life
• Sizes 1⁄2-2"
Model # RB890-0441
Reg.Price:$1,182.88
Sale Price:$929.00SAVEOVER
10%
1-YEAR
MANUFACTURER’S
WARRANTY
16-17 EH 13-07 MetFab.indd 1716-17 EH 13-07 MetFab.indd 17 6/19/13 11:17 AM6/19/13 11:17 AM

Conserve Your Cash! Ask us aboutSanding & Finishing
SAVEUP TO
37%
• Extended shafts
for buffing and polishing
odd-shaped pieces
• Bearings lubricated for long life
• 3450 rpm
• Cast-iron housing
• Buffing wheels not included
Electric Buffers
Buffing Shaft Reg. Sale
hp Wheel Dia. Dia. Model # Price Price
1⁄3 6" 1⁄2" RB619-2890 $168.76 $109.95
1⁄2 8 3⁄4 RB619-2891 242.68 169.95
1 10 1 RB619-2892 470.60 295.95
As Low As
$
10995
SAVE
22%On Dust
Collector
Portable Dust Collector
Specifications
Motor & Electrics: 1 hp, 110v, 1 ph.
Blower Capacity: 750 cfm
Bag Connections: 1
Connector Diameter: 4"
• Portable - easily moved from job to job
• 4" intake handles large chips and sawdust
easily and effectively
• Heavy-duty carrying frame
• Ball bearing casters
for easy rolling
• Wt.: 45 lbs.
Sale Price
Model # RB150-3025
$
20995
Low
Description Wt. Model # Price
Replacement Dust Bag 1 lb. RB150-3027 $12.82
Accessory
SAVE
10%
Combination 1" x 42" Belt
& 8" Disc Sander
• Belt table tilt: 45° out • Disc table size: 4 x 10"
• Disc table tilt: 45° out
• Dust collection outlet: 11⁄2" dia.
• Overall dimensions: 22 x 21 x 14"
• Belt table size: 61⁄8 x 71⁄8"
• 3000 sfm belt speed
• 1725 rpm disc speed
• 1⁄3 hp, 115v, 1 ph.,
60 Hz motor
• Approx. wt.: 62 lbs.
Mfr’s # J-4002
Sale Price
Model # RB328-1052
$
449Mfr’s List $499.00
6" x 89" Belt Edge Sander
With Heavy-Duty Stand
• Table can be tilted for horizontal/vertical sanding
• Belt tension can be easily adjusted • 32" table length
• 2 hp, 60 Hz motor, 110/220v
• 3900 fpm • Approx. wt.: 240 lbs. Low Price
Model # RB163-6089
$
69898
SAVE
22%
6" x 48" Belt & 9" Disc Sander
With Stand
• Quick belt adjustment
• Belt locks at any angle from
horizontal to vertical
• Tilting table with miter gage
• 3⁄4 hp, 115v, 1-phase motor
• 1350 sfpm • 45° table tilt
• Approx. wt.: 130 lbs.
Sale Price
Model # RB163-4900
$
27995
SAVE
20%
12" Disc Sander
Specifications
Disc Diameter: 12"
Spindle Speed: 3470 rpm
Table Size: 8" x 171⁄2"
Approx.Wt.: 70 lbs.
• Excellent for both wood and metal
• Great for deburring
• Uses low cost PSA discs
• Complete with miter gage
Sale Price
Model # RB163-4805
$
6" x 48" Belt &
10" Disc Sander
• Belt operates in horizontal
or vertical position
• Two cast-iron tilt tables
• Miter gage standard
• 1 hp, 115v, 1-phase motor
• 1650 sfpm belt
speed/1750 rpm
disc speed
• Wt.: 170 lbs.
MFR'S 1-YEAR
LIMITED WARRANTY
Sale Price
Model # RB328-1056
$
1,17900
Mfr’s List: $1,199.00
FREE
PLUS
BONUS MAIL-IN REBATE
JET Tool Box with Purchase
*Visit www.use-enco.com for mail-in redemption
form. Requires proof of purchase. Cannot be
combined with any other offer. Offer Valid 7/1/13 -
8/31/13. Void where prohibited. While supplies last.
$
170
Value
Vi i f il i d
18-19 EH 13-07 S&F.indd 1818-19 EH 13-07 S&F.indd 18 6/19/13 11:18 AM6/19/13 11:18 AM

our Lease Payment Plans today! Sanding & Finishing
SAVE
31%On Grinder
Replacement Wheels
Reg. Sale
5" Dry ReplacementWheel RB328-1959 $38.77 $27.29
Wet-Dry Grinder
8"/5"
• 8" wet grinder wheel for fine finishing
• 5" dry wheel for removing deep nicks
and scratches without damaging
• Blade holder for easy sharpening
• 1⁄4 hp • Water tank for cooling
• 3450 maximum rpm
• 1" wheel width • 1" spindle
• Wt.: 30 lbs.
Sale Price
Model # RB328-1961
$
19995
Belt Sanders
1" x 42" Sander—1⁄3 hp, 1-phase Motor
• 1800 sfpm • Contact wheel • Tilt table • 1725 rpm
2" x 48" Sander—1⁄2 hp, 1-phase, 115v Motor
• Contact wheel • Tilt table • Removable platen
• Fully hinged guard • Vertical or horizontal
• 4500 sfpm • 3450 rpm
4" x 36" Sander—1⁄2 hp,
TEFC 1-phase, 115v Motor
• Direct drive • 3450 rpm
• Full OSHA safety guard
• Easy opening side door
for belt change
1 x 42" Sander
Belt Wt. Reg. Sale
Size Lbs. Model # Price Price
1 x 42" 29 RB505-1371 $286.11 $259.00
2 x 48 48 RB505-1370 452.43 409.00
4 x 36 50 RB240-3857 674.19 609.00
As Low As
$
259
SAVEUP TO
50%
Stand
(optional)
• 3450 rpm
• 115v/60 Hz
Includes:
• A bright, flexible worklight
(bulb sold separately)
• Two grinding wheels:
Coarse 36 grit and
medium 60 grit
• Protective spark guard on
each wheel with adjustable
eye shield
• Durable cast-iron base with
mounting holes and rubber
feet for easy mounting
Bench Grinder Stand
• 27" height
• Sturdy base with
pre-drilled holes for
mounting on floors
• Base mounting area
for bench grinders:
101⁄2 x 71⁄2"
Bench Grinders
8" Bench Grinder
Starting At
$
8595
Spindle Wt. Reg. Sale
Description Size hp Amps Lbs. Model# Price Price
6" Grinder 1⁄2" 1⁄2 3.5 23 RB890-0832 $169.95 $85.95
8" Grinder 5⁄8 3⁄4 5.0 31 RB890-0833* 189.95 89.95
Stand 20 RB890-0834 98.95 59.95
* 6' power cord
SAVE
15%on Sander
Specifications
Belt Size: 1W x 30"L
Disc Size: 5"
Motor & Electrics: 1⁄4 hp, 110v, 1 ph.
TableTilt: 0° to 45°
Approx.Wt.: 12.75 lbs.
Combination 1" x 30" Belt & 5" Disc Sander
Use for Grinding, Sharpening, Sanding
& Polishing Wood & Metal
5" Aluminum Oxide PSA Discs
Reg. Sale
Grit Model # Price/100 Price/100
36 RB391-3161 $70.01 $48.29
40 RB391-3162 63.92 44.43
50 RB391-3163 60.88 42.49
60 RB391-3165 58.85 40.57
80 RB391-3164 55.80 38.70
Sale Price
Model # RB163-4832
$
10995
SAVE
26%
6" Carbide/
HSS Grinder
• Supplied with 2 medium grit
silicon carbide (green) wheels
Specifications:
• Two 113⁄4 x 41⁄8" tool
tables tilt 45° up
or down
• 1⁄2 hp motor,
single phase, 115v
• 3400 rpm
• Wt.: 110 lbs.
Sale Price
Model # RB891-8106
$
24995
Specifications
Belt Size: 4 x 36"
Table Size: 5" x 71⁄2"
Disc Size: 6"
Main Motor: 110v, 1⁄4 hp, 60 hz, 1 ph.
Speed: 1720 rpm
Machine Dimensions: 20 x 16 x 12"
ApproximateWt.: 38.64 lbs.
• Disc angle and bevel sanding • Finish edging
• Sanding arm locks and can be used in any
position from horizontal to vertical
Combination
4" x 36" Belt &
6" Disc Sander
Sale Price
Model # RB163-4850
$
18-19 EH 13-07 S&F.indd 1918-19 EH 13-07 S&F.indd 19 6/19/13 11:18 AM6/19/13 11:18 AM

We stock over 20,000 ReplacementBandsaws
SAVEUP TO
$
370
Cutting Reg. Sale
Width Model # Price Price
14" RB135-1545 $2,978.88 $2,769.95
18 RB135-1551 3,351.68 2,979.95
14" & 18" Vertical Bandsaws
Infinitely Variable Speed
• Cuts steel, aluminum alloys, cast iron, brass, plastic or plexiglass
• Table inclination 15° front and back, 15° right and left
1-YEAR LIMITED
WARRANTY
• Large cap. built-in welder and grinder
• 1⁄8" to 5⁄8" width cap.
• Grinding wheel and built-in light
• Blade cutter
Standard Equipment
Starting At
$
2,76995
Specifications 14" 18"
Cap.Thickness: 91⁄4" Max. 10" Max.
Table Size: 193⁄4 x 193⁄4" 231⁄2 x 191⁄2"
Blade Length: 114.7" 136"
BladeWidth: 3⁄32 to 5⁄8" 3⁄32 to 5⁄8"
BladeThickness: .025" .025"
Speeds: 65 to 265 sfpm 80 to 320 sfpm
Floor toTable Ht.: 391⁄4" 381⁄4"
Overall Height: 68" 79"
Welder: 1.2 kva 2.4 kva
Motor & Electrics: 1 hp, 220v, 1 ph. 1 hp, 220v, 3 ph.
Wt.: 760 lbs. 770 lbs.
SAVEUP TO
50%
Bi-Metal Bandsaw Blades
Welded to Length
• Cobalt high-speed steel cutting edge
• Designed for long life in a wide variety of utility and contour
cutting operations • Thickness: .035" • Variable tooth
Each
Qty.: 5+
As Low As
$
2395
Blade Mfr’s Sale Price Each
L W tpi Model # List 1-4 5+
7' 9" 3⁄4" 6-10 RB371-0410 $46.26 $32.95 $23.95
7' 9 3⁄4 10-14 RB371-0412 46.26 32.95 23.95
10' 3⁄4 6-10 RB240-4965 55.07 30.95 25.95
10' 3⁄4 10-14 RB240-4966 55.07 30.95 25.95
10' 1 10-14 RB240-4967 63.01 30.95 25.95
11' 6" 1 5-8 RB240-4831 70.80 42.95 35.95
11' 6" 1 10-14 RB371-0446 70.80 44.95 37.95
5" x 6"
Horizontal/Vertical
Bandsaw
3 Speeds
• Vise swivels 45° left
• 1⁄3 hp, 110/220v motor
• Speed changes 80, 120, 200 sfpm
• Automatic cut-off safety switch
• Mitering vise & blade guard
• Wt.: 125 lbs.
Specifications
Max.WorkpieceWidth: 6"
Throat Depth: 41⁄8"
Horizontal Cap.Round: 5"
Blade Size: 641⁄2 x 1⁄2 x .025"
Wheel Dia.: 73⁄8"
Vertical Saw Height: 56"
Horizontal Saw Height: 38"
Machine Dim.: 38L x 12"D
1-YEAR LIMITED
WARRANTY
Sale Price
Model # RB505-6840
$
26995
al
sfpm
SAVEOVER
10%
Replacement Blade
Flexback 6 tpi
• 135 x 1 x .035"
Model # RB990-4073
Sale Price $19.95 1 year limited warranty!
Reg. Sale
10" x 16" Bandsaw RB136-2810 $4,899.98 $4,409.95
10" x 17" Bandsaw RB136-2800 3,579.98 2,995.95
10" x 16" Swivel Frame &
10" x 17" Horizontal Bandsaws
• Heavy-duty, cast-iron frame
• Blade chip brush • Safety guards
• Automatic stop • Coolant system
• RB136-2810 features swivel frame and
90-45° quick-acting vise
• RB136-2800 features 90-60° quick-acting vise
10 x 16"
model shown
Specifications 10" x 16" Swivel Frame 10" x 17" Horizontal Frame
Motor & Electrics: 2 hp, 220/440v, 3 ph., 60 Hz, 1750 rpm 2 hp, 220/440v, 3 ph., 60 Hz, 1750 rpm
4 Blade Speeds: 82, 131, 167 & 232 sfpm 82, 131, 167, 246 sfpm
Cutting Cap.90°: 10 x 16" 10 x 17"
Cutting Cap.45°: 9 x 10" 10 x 10"
Blade Size: 135 x 1 x .035" 135 x 1 x .035"
Machine Dim.: 67L x 22"D 75L x 28"W
Approx.Wt.: 1068 lbs. 792 lbs.
Starting At
$
2,99595
SAVEUP TO
$
584
20-21 EH 13-07 Bandsaws.indd 2020-21 EH 13-07 Bandsaws.indd 20 6/19/13 11:29 AM6/19/13 11:29 AM

parts for the Machines We Sell! Bandsaws
SAVEOVER
$
100
Hard Edge Flex Back Blade – 7'9"L x 3⁄4"W
Specifications
Motor & Electrics: 1 hp, 110v, 60 Hz, 1725 rpm
4 Blade Speeds: 90, 135, 195, 255 sfpm
Blade Size: 93 x 3⁄4 x .032"
Cutting Cap.: 7 x 12"
Approx.Wt.: 314 lbs.
Replacement Blades
7" x 12" Horizontal/Vertical Bandsaw
Hydraulic Feed & Coolant Pump
• Portable on four 5" casters
• Heavy cast-iron base with quick-lock vise,
vertical table saw
• Hardened and ground worm gears
• Auto shut-off
Includes:
10 x 10" vertical table
and 45° swivel vise.
1-YEAR LIMITED
WARRANTY
Sale Price
Model # RB137-3175
$
Reg. Sale
tpi Model # Price Price
Carbon—.032"Thick
8 RB371-3164 $12.94 $9.99
14 RB371-3165 12.94 9.99
SAVE$
240
Specifications
Motor & Electrics: 1 hp, 220v, 60 Hz,
1 ph., 1720 rpm
3 Blade Speeds : 127, 216, 268 sfpm
Cutting Capacity 90°: 7 x 101⁄2", 7" round
Cutting Capacity 45°: 4 x 41⁄2", 4" round
Blade Size: 93 x 3⁄4 x .032"
Machine Dimensions: 50L x 221⁄2"D
ApproxWt.: 400 lbs.
7" x 101⁄2"
Horizontal/Vertical Bandsaw
Geared Swivel Head for
Quick Speed Changes
Sale Price
Model # RB137-3200
$
1,52995
• Heavy cast-iron base with
quick-lock vise
• Hydraulic feed and coolant system
• Hardened and ground worm gear,
vertical table saw
SAVE
20%
Specifications:
Motor & Electrics: 1.5 hp, 110v, 1 ph.
Blade Speed (No.) Range sfpm:
RB337-9149: (4) 114, 196, 288, 377
RB337-9150: (Variable) 95-402
Capacity:
Round: 9"
Rectangle @ 90°: 5" x 16"
Rectangle @ 45°: 8" x 91⁄2"
Blade Size: 1149⁄16" x 1" x 0.035"
Machine Dimensions: 62"L x 22"D x 481⁄2"H
9" x 16" Horizontal Bandsaws
Step Pulley & Variable Speed Models
Features:
• High efficiency gear drive system
(RF-916S: Step Pulley, RF-916SV:
Variable Speed)
• Fully adjustable hydraulic downfeed
• 0 to 45° cutting angle
• Carbide bearing blade guide enhances
cutting stability and extends blade life
• Coolant system for wet cutting
• Stand with integral chip/water pan
Includes: Bi-metal blade, chip brush and
length stop set.
Wt. Reg. Sale
Description Mfr’s # Lbs. Model # Price Price
Step Pulley RF-916S 640 RB337-9149 $2,968.22 $2,395.00
Variable Speed RF-916SV 640 RB337-9150 3,310.70 2,595.95
• Heavy cast-iron base with quick swivel lock vise and
vertical saw table
• Adjustable hydraulic downfeed and coolant system
• Safety automatic shutoff and adjustable material stop
• Worm gears are hardened and ground
• Roller cabinet has built-in chip pan
• Motor & electrics: 1 hp, 220v, 1 ph., 1720 rpm
• Model # RB137-3190 includes blade guards,
chip brush, adjustable roller blade guides
• Model # RB137-3195 has a geared head
for quick speed changes
7" x 12" Horizontal/Vertical Bandsaws
Specifications RB137-3190 RB137-3195
Blade Speeds: (4) 85, 130, 180, 285 sfpm (3) 127, 216, 268 sfpm
Blade Size: 93 x 3⁄4 x .032" 93 x 3⁄4 x .032"
Cutting Cap.90˚: 7 x 12", 7" Round 7 x 12", 7" Round
Cutting Cap.45˚: 41⁄2 x 7"
Approx.Wt.: 350 lbs. 350 lbs.
Reg. Sale
Horiz./Vert.Bandsaw RB137-3190 $1,099.98 $989.95
Geared Head Horiz./Vert.Bandsaw RB137-3195 1,299.98 1,039.95
RB137-3190
Bi-Metal Blade
• 10-14 tpi
• 93L x 3⁄4W x .035" thick
Model # RB371-0412
Sale Price 1-4 $32.95; 5+ $23.95
Replacement Blades
stop
SAVEUP TO
20%
Starting At
$
98995
20-21 EH 13-07 Bandsaws.indd 2120-21 EH 13-07 Bandsaws.indd 21 6/19/13 11:29 AM6/19/13 11:29 AM

Ask the Enco Tech Team to helpMills
SAVEUP TO
$
1,937
9" x 49" & 10" x 54" Variable Speed Vertical Mills
• Certified Meehanite casting stress relieved to
provide a rigid machine structure
• Way covers for knee and crossfeed
• Precision-hardened and ground table and ways
• Dynamically balanced head for quiet,
trouble-free operation
• One-shot lubrication and solid quill feed
• Head tilts 90° R/L, 45° forward/back
• U.S. patented ram locking system
• Turret swivels 360°
• Hand-scraped turret column ways
• Dovetail ways (9" x 49"); Square ways (10" x 54")
• Upper and lower surface of saddle
laminated with Turcite-B for smooth,
accurate and wear-resistant surfaces
• 3-year warranty on DRO
Wt. Reg. Sale
Description Lbs. Model # Price Price
Mill Only
9 x 49" 2,227 RB307-3678 $8,356.98 $7,100.00
10 x 54" 3,400 RB890-9988 9,986.98 8,359.00
Mill with PowerTable Feed and Anilam®
2-Axis DRO
9 x 49" 2,246 RB307-3689 10,338.98 8,779.95
10 x 54" 3,440 RB307-3691 11,968.98 10,169.95
3-Axis (Quill) DRO
9 x 49" 2,251 RB307-3690 10,806.98 9,179.95
10 x 54" 3,445 RB307-3692 12,436.98 10,569.95
3-Axis (Knee) DRO
9 x 49" 2,251 RB619-2896 10,906.98 9,269.95
10 x 54" 3,445 RB619-2895 12,536.98 10,599.95
Specifications 9" x 49" 10" x 54"
Variable Speed: 70-4200 rpm 70-4200 rpm
LongitudinalTravel: 35" w/o Power Feed 39" w/o Power Feed
3T-Slots: 5⁄8" x 11⁄4 5⁄8" x 11⁄4
Saddle CrossTravel: 12" 16.5"
KneeTravel: 161⁄2" 173⁄4"
Spindle/QuillTravel: 5" 5"
SpindleTaper: R8 R8
Spindle Diameter: 3.375" 3.375"
3 Spindle Feeds (Inch/Rev.): .0015, .003, .006" .0015, .003, .006"
Spindle toTable: 0-18 5⁄16" 0-20"
Spindle to Column: 5-20" 7-26"
Head Swivel, w/Locks RH/LH: 90°/90° 90°/90°
HeadTilt-Forward & Back: 45°/45° 45°/45°
RamTurret Swivel: 360° 360°
RamTravel: 12" 18"
Motor & Electrics: 3 hp, 220/440v, 3 ph. 3 hp, 220/440v, 3 ph.
Machine Dimensions: 85H x 59W x 55"L 88H x 72W x 66"L
Machine Base Dimensions: 371⁄2 x 24" 43 x 24"
Floor Space Required (Max.): 140W x 70"D 150W x 94"D
Starting At
$
7,100
SAVEUP TO
$
1,764 RB890-9198 shown
9" x 42", 9" x 49" & 10" x 54"
Variable Speed Vertical Mills
• Head tilts 90° right/left, 45° forward/back • Precision Y-axis, leadscrew-bearing hub with a
maximum .005" deviation to Y-axis centerline, giving fluid in/out motion to the saddle
• Precision squareness of table surface to the guideway; .00078"/12" travel
• Turret swivels 360° • Parallelism of table surface to longitudinal movement;
.00078"/12" travel • R8 spindle taper • 3 T-slots: 5⁄8" • 3.375" spindle dia.
• 3 spindle feeds: .0015, .003, .006" • 0-18" spindle to table
• Backlash adjustment • One-shot lubrication to table and saddle;
gravity feed lubricator for spindle • Drawbar and tool kit
Wt. Reg. Sale
Size Lbs. Model # Price Price
Mill Only
9 x 42" Step Pulley 2,400 RB100-1527 $6,859.98 $5,829.95
9 x 49"Variable Speed 2,650 RB100-1599 7,558.98 6,575.00
All Packages Include Installed Enco 150 In./Lb.
Torque PowerTable FeedVertical Mill Packages
9 x 42" Step Pulley 2,415 RB505-6781 7,159.98 5,995.95
Mill with Enco 150 in./lbs.Torque PowerTable Feed
and ACU-RITE®
VUE 2-Axis DRO System Installed
9 x 42" Step Pulley 2,435 RB890-9181 8,359.98 6,595.95
and ACU-RITE®
VUE 3-Axis (Quill) DRO System Installed
9 x 42" Step Pulley 2,440 RB890-9182 8,759.98 7,139.95
and ACU-RITE®
VUE 3-Axis (Knee) DRO System
9 x 42" Step Pulley 2,440 RB890-9183 8,809.98 7,395.95
Starting At
$
5,82995
1-YEAR
LIMITED
WARRANTY
Specifications 9" x 42"/9" x 49" 10" x 54"
Speeds: 80-4800 rpm - Step Pulley 78-4200 rpm
LongitudinalTravel: 30" - Step Pulley 38.5"
Saddle CrossTravel: 13.5" 17"
KneeTravel: 16" 17.5"
Spindle/QuillTravel: 5" 5.1"
Spindle to Column: 5.5-20" 4.5-20"
RamTravel: 14.5" 19"
Motor & Electrics: 2 hp, 220v, 3 ph. 3 hp, 220/400v, 3 ph.
Machine Dimensions: 85 x 71 x 74" 841⁄2 x 72 x 75"
22-23 EH 13-07 M&MD.indd 2222-23 EH 13-07 M&MD.indd 22 6/19/13 11:30 AM6/19/13 11:30 AM

you select the Right Machine! Mill/Drills
RB404-0079 shown
20" Square Column Mill/Drills
Starting At
$
1,99595
Specifications
Table Size: 91⁄2 x 311⁄2"
6 Spindle Speeds: 120, 210, 345, 670, 1180, 1970 rpm
Capacity:
Drilling Steel: 19⁄16"
Drilling Cast Iron: 13⁄4"
End Mill: 11⁄4"
Face Mill: 31⁄8"
TableTravel (Longitudinal): 22"
CrossTableTravel: 8"
4T-Slots: 1⁄2"W
Spindle QuillTravel: 43⁄4"
SpindleTaper: R8
Spindle/Quill Dia.: 3"
Spindle toTable (Max): 183⁄4"
HeadTilt: 90° L, 90° R
Prewired: 220v, 1 ph.
Machine Dimensions: 421⁄2W x 28D x 57"H
Max.floor space req.: 771⁄8W x 311⁄2"D
1-YEAR LIMITED
WARRANTY
Wt. Reg. Sale
Mill/Drill Only 662 RB404-0045 $2,419.98 $1,995.95
Mill/Drill with Stand 810 RB404-0077 2,718.98 2,195.95
Mill/Drill with Stand and Installed Enco PowerTable Feed 841 RB404-0078 3,118.98 2,595.95
Mill/Drill with Stand, Installed Enco PowerTable Feed
and ACU-RITEVUE®
2-Axis DRO 845 RB404-0079 4,318.98 3,595.95
• Head tilts left and right
• 6-speed geared head
• Dovetail column ways
• Quick spindle changes with quick select
gearshift, no belts to change
SAVEUP TO
$
723
• Face Mill with Arbor
• Drill Chuck Arbor
• Drill Chuck & Key
Standard Equipment
SAVEUP TO
$
904
• Forward and reversing switch for tapping
• 360° head swivel
163⁄8" Mill/Drills
• Drill Chuck with Key
• Drill Chuck Arbor
• 52 Pc. Clamping Kit
• Shell Mill Arbor
• Angle Drill Press Vise
• Face Mill
Standard Equipment
Specifications
Speeds: 150-3000 rpm
Swing: 163⁄8"
Long.TableTravel: 17"
TableWork Surface Area: 81⁄4 x 281⁄2"
CrossTableTravel: 71⁄4"
Capacity:
Drilling Steel: 11⁄4"
Drilling Cast Iron: 11⁄2"
End Mill/Face Mill: 3⁄4"/3"
4T-Slots: 5⁄8"
Spindle/QuillTravel: 5"*
SpindleTaper: R8
Spindle toTable (Max.): 18"
Spindle to Column (Max.): 65⁄8"
Spindle/Quill Dia.: 3"
Motor & Electrics: 11⁄2 hp, 110/220v, 1 ph.
Machine Dimensions: 431⁄2H x 38W x 36"D
Floor Space (Max.): 62W x 50"D
* 4" with power downfeed
1-YEAR LIMITED
WARRANTY
Starting At
$
1,99595
With Power Downfeed
Wt. Reg. Sale
Mill/Drill Only
w/Power Downfeed 690 RB105-1300 $2,322.30 $1,995.95
Mill/Drill with Cabinet Stand with Chip Pan
w/Power Downfeed 775 RB105-1298 2,509.98 2,249.95
Mill/Drill with 2-Axis ACU-RITE®
VUE DRO, Enco PowerTable Feed,
Cabinet Stand
Mill/Drill with 3-Axis ACU-RITE®
VUE DRO, Enco PowerTable Feed
and Cabinet Stand with Chip Pan
22-23 EH 13-07 M&MD.indd 2322-23 EH 13-07 M&MD.indd 23 6/19/13 11:31 AM6/19/13 11:31 AM

Machinery ManualsLathes
• Headstock with tapered roller bearings
• Hardened and ground ways
• Reversing switch
• Inch dials
• Reinforced cross ribs
Wt. Reg. Sale
Lbs. Model # Price Price
Bench Lathe Only
250 RB893-1273 $1,295.98 $1,165.00
Bench Lathe with Cabinet Stand
328 RB308-0338 1,497.98 1,365.00
*Lathe is prewired for 110v,but can be wired for 220v
Speciﬁcations
Swing Over Bed: 9" Swing Over Cross Slide: 51⁄4"
Distance Between Centers: 20" CarriageTravel: 16" longitudinal, 41⁄2" cross
2 Longitudinal Feeds: .005, .007" 27 InchThreads: 8-56 tpi
11 MetricThreads: .5-3mm Tailstock SpindleTravel: 1.57" (40mm)
CompoundTravel: 2" TailstockTaper: 2 MT
SpindleTaper: 3 MT Spindle Bore Dia.: .787" (20mm)
Motor & Electrics: 3⁄4 hp, 110v*, 1 ph. 6 Spindle Speeds: 130-2000 rpm
Machine Dimensions: 38L x 181⁄2W x 16"H Spindle Nose Mounting: 11⁄2-8"
Quick-change gearbox for easier threading
9" x 20" Bench Lathes
SAVEUP TO
10%
1-YEAR LIMITED
WARRANTY
Starting At
$
1,165
• 4" 3-Jaw Chuck • 7" 4-Jaw Chuck • Steady Rest
• Follow Rest • Metric Change Gears • 7" Faceplate
• 2 MT Dead Center • Threading Dial • Toolbox with Tools
• 1⁄2" Capacity, 4-Way Tool Post
Standard Equipment
• Hardened and ground bed with reinforced cross ribs
• Headstock with tapered roller bearings
• Thread chasing dial
• Easy speed changes
• Splash lubrication in headstock
• Removable gap block
Wt. Reg. Sale
Lbs. Model # Price Price
Lathe ONLY
1,100 RB510-2585 $4,176.98 $3,759.00
Lathe with Cabinet Stand
1,345 RB510-2591 4,496.98 4,059.00
Lathe with Cabinet Stand with ACU-RITE®
VUE 2-Axis DRO Installed
1,355 RB510-2592 5,876.98 5,189.00
Standard Equipment
• 6" 3-Jaw Chuck
• 7" 4-Jaw Chuck
• Steady Rest
• Follow Rest
• 10" Faceplate
• Chip Pan
• 3 MT Dead Center
• 11⁄16" Capacity
• 4-Way Tool Post
• Metric Change Gears
• Threading Dial
• Toolbox with Tools
Speciﬁcations
Swing Over Bed: 13" Cross-Slide Feed Range (Inch./Rev.): .0004-.0105"
TableWork Surface Area: 13 x 40" CompoundTravel: 211⁄16"
Swing Over Gap: 183⁄4" Tailstock SpindleTravel: 33⁄4"
Length of Gap: 9" TailstockTaper: 3 MT
Swing Over Cross Slide: 8" Spindle Nose Mounting: D1-4
Swing Over Compound: 3" Spindle Bore Dia.: 11⁄2"
Distance Between Centers: 391⁄3" SpindleTaper: 5 MT
CarriageTravel: 34" SpindleTaper with Sleeve: 3 MT
Long.Feed Range (Inch./Rev.): .0011-.0311" 18 Spindle Speeds: 60-1500 rpm
40 InchThreads: 4-112 tpi Motor & Electrics: 11⁄2 hp, 220v, 1 ph.
29 MetricThreads: .25-4.5mm Machine Dimensions (w/o stand): 67L x 26W x 25"H
Floor Space Required (Max.): 72L x 34"W
13" x 40" Geared Head
Gap Bed Bench Lathes
18 Speeds, 60 to 1500 rpm
SAVEUP TO
$
688
Starting At
$
3,759 1-YEAR
LIMITED WARRANTY
24-25 EH 13-07 Lathes.indd 2424-25 EH 13-07 Lathes.indd 24 6/19/13 11:31 AM6/19/13 11:31 AM

Online at use-enco.com Lathes
Speciﬁcations 13" x 40" 14" x 40"
Swing Over Bed: 13" 14"
Swing Over Gap: 19" 20"
Length of Gap: 93⁄8" 93⁄8"
Swing Over Cross Slide: 7" 81⁄2"
Swing Over Compound: 31⁄2" 31⁄2"
CarriageTravel: 371⁄2" 371⁄4"
Long.Feed Range
(In./Rev.): .0012-.0294" .0012-.0294"
40 InchThreads: 4-112 tpi 4-112 tpi
22 MetricThreads: .45-7.5mm .45-7.5mm
Cross-SlideTravel: 6" 6"
Cross-Slide Feed Range: .0003-.0100" .0003-.0100"
CompoundTravel: 31⁄2" 31⁄2"
Tailstock SpindleTravel: 43⁄4" 43⁄4"
TailstockTaper: 3 MT 3 MT
Spindle Nose Mounting: D1-4 D1-4
Spindle Bore Dia.: 17⁄16" 17⁄16"
SpindleTaper: 5 MT 5 MT
Motor & Electrics: 3 hp, 220v 3 hp, 220v, 3 ph.
Machine Dimensions: 713⁄4L x 31W x 455⁄8"H 713⁄4L x 31W x 491⁄8"H
13" x 40" & 14" x 40" Geared
Head Gap Bed Engine Lathes
8 Speeds, 90 to 1800 rpm
• Jog button for easy gear engagement
and spindle inching
• Quick speed changes
• Splash lubrication in headstock
• Totally enclosed gearbox
• Hardened and ground bedways
• Spindle with tapered roller bearings
Shown with DRO
Wt. Reg. Sale
Engine Lathe ONLY
13" x 40" 1,940 RB319-9733 $5,998.98 $5,699.00
14" x 40" 1,940 RB308-0232 6,598.98 5,939.00
Engine Lathe with ACU-RITE®
VUE
2-Axis DRO Installed
13" x 40" 1,976 RB319-9734 7,498.98 6,749.00
14" x 40" 1,976 RB308-0235 8,098.98 7,289.00
1-YEAR LIMITED
WARRANTY
SAVEUP TO
$
809
Starting At
$
5,699
• 4-Way Tool Post
• Backplate
• Steady and Follow Rests
• Chip Pan
• 12" Faceplate
• Coolant System
• Live and Dead Centers
• Foot Brake
• Splashguard
• 6" 3-Jaw and 8" 4-Jaw Chucks
Standard Equipment
SAVEUP TO
$
901
Wt. Reg. Sale
Bench Lathe Only 1,100 RB328-6153 $5,610.25 $5,049.95
Bench Lathe with Cabinet Stand 1,270 RB328-6135 6,096.98 5,495.95
Bench Lathe with ACU-RITE®
VUE 2-Axis
DRO System Installed and Cabinet Stand 1,320 RB328-6134 7,496.98 6,595.95
• 6" 3-Jaw Chuck
• 8" 4-Jaw Chuck
• 10" Faceplate
• Steady Rest
• Follow Rest
• 3 MT Dead Center
• 4-Way Tool Post
• Chip Pan
• Toolbox
• Threading Dial
Standard Equipment
14" x 40" Geared Head Gap Bed Bench Lathes
Features:
• Full-length splashguard
• 2 hp, 220v, 1-ph. motor
• Bed is hardened and ground
with reinforced cross ribs
• D1-4 camlock spindle
Speciﬁcations
Swing Over Bed: 14"
Swing Over Cross Slide: 8"
Distance Between Centers: 40"
Swing Over Gap: 20"
Spindle BoreTaper: 5 MT
CenterTaper: 3 MT
18 Spindle Speeds: 70-1500 rpm
Longitudinal Feeds: .002-.024"
Cross Feeds: .001-.012"
40 InchThreads: 4-112 tpi
22 MetricThreads: .25-6mm
Cross-SlideTravel: 6"
Tailstock
SpindleTravel: 4"
CenterTaper: 3 MT
BedWidth: 71⁄8"
GapWidth: 8"
1yearlimitedwarranty!
As Low As
$
5,04995
24-25 EH 13-07 Lathes.indd 2524-25 EH 13-07 Lathes.indd 25 6/19/13 11:32 AM6/19/13 11:32 AM

Shop the 2013 Enco Master CatalogEnd Mills
Surface Treatment:
TiN (Titanium Nitride)
• General-purpose use • Extends tool life
• Used for aggressive machining of steels
• Requires increase of 25 to 30% in machining speeds vs. HSS
Regular Length - 30° Helix
2 Flute HSS TiN Coated Single End Mills
Mill Shank Flute Low
Dia. Dia. Length OAL Model # Price
1⁄8" 3⁄8" 3⁄8" 25⁄16" RB337-5060 $8.24
3⁄16 3⁄8 7⁄16 25⁄16 RB337-5061 8.24
1⁄4 3⁄8 1⁄2 27⁄16 RB337-5062 8.24
5⁄16 3⁄8 9⁄16 25⁄16 RB337-5063 8.24
3⁄8 3⁄8 9⁄16 25⁄16 RB337-5064 8.24
7⁄16 3⁄8 13⁄16 21⁄2 RB337-5065 11.57
1⁄2 1⁄2 1 3 RB337-5067 11.98
9⁄16 1⁄2 11⁄8 31⁄8 RB337-5068 14.39
5⁄8 1⁄2 11⁄8 31⁄8 RB337-5069 16.13
5⁄8 5⁄8 15⁄16 37⁄16 RB337-5070 16.79
11⁄16 1⁄2 15⁄16 35⁄16 RB337-5071 17.11
3⁄4 1⁄2 15⁄16 35⁄16 RB337-5072 18.97
3⁄4 3⁄4 15⁄16 39⁄16 RB337-5074 18.97
13⁄16 3⁄4 11⁄2 33⁄4 RB337-5075 27.50
7⁄8 5⁄8 11⁄2 35⁄8 RB337-5076 27.01
7⁄8 7⁄8 11⁄2 33⁄4 RB337-5078 23.84
15⁄16 5⁄8 11⁄2 35⁄8 RB337-5079 24.09
1 5⁄8 11⁄2 35⁄8 RB337-5080 31.43
1 3⁄4 11⁄2 33⁄4 RB337-5081 31.43
1 1 15⁄8 41⁄8 RB337-5082 36.75
11⁄8 3⁄4 11⁄2 33⁄4 RB337-5083 40.48
Starting At
$
824
• General-purpose use
• 30° Helix
• Used for aggressive machining of steels
• Requires increase of 25 to 30% in machining
speeds vs. HSS
Surface Treatment:
TiN (Titanium Nitride)
Regular Length
2 Flute HSS TiN Coated Double End Mills
Mill Shank Flute Interstate Reg. Sale Hertel Low
Dia. Dia. Length OAL Model # Price Price Model # Price
1⁄8" 3⁄8" 3⁄8" 31⁄8" — RB337-5280 $11.48
5⁄32 3⁄8 7⁄16 31⁄8 RB328-0798 $10.23 $8.95 —
3⁄16 3⁄8 7⁄16 31⁄8 RB326-0858 9.67 7.95 RB337-5282 11.48
7⁄32 3⁄8 1⁄2 31⁄8 RB328-0799 10.23 8.95 RB337-5283 12.14
1⁄4 3⁄8 1⁄2 31⁄8 RB326-0859 9.80 7.95 RB337-5284 11.64
9⁄32 3⁄8 9⁄16 31⁄8 — RB337-5285 12.23
5⁄16 3⁄8 9⁄16 31⁄8 RB326-0860 9.67 7.95 RB337-5286 11.48
11⁄32 3⁄8 9⁄16 31⁄8 RB319-2292 10.23 8.95 —
11⁄32 1⁄2 9⁄16 31⁄8 — RB337-5287 12.14
3⁄8 3⁄8 9⁄16 31⁄8 RB326-0861 9.80 7.95 RB337-5288 11.64
13⁄32 1⁄2 13⁄16 33⁄4 — RB337-5289 18.46
7⁄16 1⁄2 13⁄16 33⁄4 RB326-0862 14.78 12.95 RB337-5290 17.54
1⁄2 1⁄2 13⁄16 33⁄4 RB326-0863 14.78 12.95 RB337-9144 17.54
9⁄16 5⁄8 11⁄8 41⁄2 RB326-0864 20.94 17.95 RB337-5293 24.86
5⁄8 5⁄8 11⁄8 41⁄2 RB326-0865 20.45 17.95 RB337-5294 24.29
3⁄4 3⁄4 15⁄16 5 RB326-0866 25.85 22.95 —
7⁄8 7⁄8 19⁄16 51⁄2 RB328-0800 32.51 27.95 RB337-5296 38.59
1 1 15⁄8 57⁄8 RB328-0801 40.00 34.95 RB337-5297 47.48
SAVEUP TO
20%
Starting At
$
795
As Low As
$
377
SAVE
30%On 12+
Carbide-Tipped
Tool Bits
Ind. AL AR Sale Price Ea.
Size No. Model # Model # 1-11 12+
C2
1⁄4" 4 RB383-7140 RB383-7100 $5.39 $3.77
5⁄16 5 RB383-7144 RB383-7104 5.90 4.13
3⁄8 6 RB383-7148 RB383-7108 5.90 4.13
1⁄2 8 RB383-7156 RB383-7116 6.63 4.64
5⁄8 10 RB383-7160 RB383-7120 11.04 7.62
3⁄4 12 RB383-7164 RB383-7124 13.56 9.49
C5
1⁄4 4 RB383-7142 RB383-7102 5.39 3.77
5⁄16 5 RB383-7146 RB383-7106 5.90 4.13
3⁄8 6 RB383-7150 RB383-7110 5.90 4.13
1⁄2 8 RB383-7158 RB383-7118 6.63 4.64
5⁄8 10 RB383-7162 RB383-7122 10.88 7.62
3⁄4 12 RB383-7166 RB383-7126 13.56 9.49
• C2 grade for cast iron and nonferrous materials
• C5 grade for steel and steel alloys
Style AL
• Cuts from left to right
• Left hand for turning to a square shoulder
Style AR
• Cuts from right to left
• Right hand for turning to a square shoulder
Each
Qty.: 12+
Simply text Encotools and your
email address to 77053 to
sign up for Special Offers.
Msg & Data rates may apply. Email subscription only.
Text to Join
To: 77053
Encotools
your email address
26-27 EH 13-07 EM.indd 2626-27 EH 13-07 EM.indd 26 6/19/13 11:33 AM6/19/13 11:33 AM

Enco HOTdeals July 2013 Catalog

Enco HOTdeals July 2013 Catalog

Recommended

Recommended

More Related Content

Similar to Enco HOTdeals July 2013 Catalog

Similar to Enco HOTdeals July 2013 Catalog (20)

Recently uploaded

Recently uploaded (20)

Enco HOTdeals July 2013 Catalog