The document provides information on Honeywell's MICRO SWITCH LS series of general purpose limit switches. Key points include:
- The switches offer a compact design that allows installation in space-constrained applications while providing reliable performance.
- They are available with a variety of actuator options including side rotary, top pin plunger, and wobble coil spring to suit different applications.
- The switches feature rugged die-cast metal construction, IP67 and NEMA ratings, and double break contacts to provide dependable switching under demanding environmental conditions.
- Product specifications, features and benefits, potential applications, and order guides are provided to help users select the appropriate limit switch for their needs.
The Kinetrol Universal Limit Switch offers a wide range of signaling options in a zinc alloy fully enclosed corrosion
resistant case available for direct mounting onto Kinetrol rotary actuators, or discrete mounting via an industry standard VDI/VDE interface onto any make of rotary actuator. Easy to wire and set up with real industrial-quality robustness. - Internally fitted options include AS interface digital communication and a 4-20 mA 2-wire modulating angle retransmit circuit.
1) The PGV 1" valve is designed for smaller landscape applications and offers durability for residential and light commercial use.
2) It is available in four configurations - angle, globe, male x male, or male x barb - and can be purchased with or without flow control.
3) The PGV valve features easy servicing, with a jar-top design that allows quick twisting to access the inside, making it the fastest valve to service in the industry.
This document provides information on Hunter Industries' PGV 11⁄2" and 2" valves for large landscape irrigation applications. The valves are durable and reliable, built to handle flows over 100 GPM. They feature a rugged diaphragm and support to prevent stress failure. The valves are available in 11⁄2" and 2" globe and angle models with flow control.
The Explosion Proof Limit Switch Box offers a wide range of signaling options in a compact corrosion resistant aluminum alloy housing available for close - mounting onto Kinetrol actuators or discrete mounting via a Kinetrol 05 square or industry standard VDI/VDE interface onto any make of rotary actuator. Easy to wire and set up with true industrial robustness.
Internally fitted options include AS interface digital communication and a 4-20mA, 2-wire, modulating angle retransmit circuit. The range of switches and terminal arrangements includes 2 or 4 switches and extra connections - allowing single point termination of wiring for limit switches and solenoid valves. This product is available to mount on Kinetrol models 03 - 30.
A rugged, corrosion-resistant pneumatic vane actuator with only a single moving part, the Kinetrol vane actuator is warranted to operate trouble-free for four million cycles.
This is the Kinetrol Vane Actuator general product catalog, which includes pneumatic actuators, spring return units, positioners, indicators, limit switches, solenoid valves, and other valve actuation equipment.
This document provides specifications for Lowara e-SV series electric pumps. It describes the pumps' construction as vertical multistage centrifugal pumps with stainless steel liquid ends. It lists the pump sizes and their flow rates, pressure capabilities, and motor power ranges. It also provides details on pump components like motors, seals, and materials of construction.
The TorkWrench 10-100 iron roughneck provides up to 100,000 ft-lbs of torque for makeup and breakout jobs using a three-jaw gripping system and high-torque three-roller spinning system. It has an intelligent pneumatic control system and distributes load equally to reduce damage to tool joints. The unit is versatile and can be used on land or offshore as well as converted to a mobile bucking unit for offline assembly of tools.
The Kinetrol Universal Limit Switch offers a wide range of signaling options in a zinc alloy fully enclosed corrosion
resistant case available for direct mounting onto Kinetrol rotary actuators, or discrete mounting via an industry standard VDI/VDE interface onto any make of rotary actuator. Easy to wire and set up with real industrial-quality robustness. - Internally fitted options include AS interface digital communication and a 4-20 mA 2-wire modulating angle retransmit circuit.
1) The PGV 1" valve is designed for smaller landscape applications and offers durability for residential and light commercial use.
2) It is available in four configurations - angle, globe, male x male, or male x barb - and can be purchased with or without flow control.
3) The PGV valve features easy servicing, with a jar-top design that allows quick twisting to access the inside, making it the fastest valve to service in the industry.
This document provides information on Hunter Industries' PGV 11⁄2" and 2" valves for large landscape irrigation applications. The valves are durable and reliable, built to handle flows over 100 GPM. They feature a rugged diaphragm and support to prevent stress failure. The valves are available in 11⁄2" and 2" globe and angle models with flow control.
The Explosion Proof Limit Switch Box offers a wide range of signaling options in a compact corrosion resistant aluminum alloy housing available for close - mounting onto Kinetrol actuators or discrete mounting via a Kinetrol 05 square or industry standard VDI/VDE interface onto any make of rotary actuator. Easy to wire and set up with true industrial robustness.
Internally fitted options include AS interface digital communication and a 4-20mA, 2-wire, modulating angle retransmit circuit. The range of switches and terminal arrangements includes 2 or 4 switches and extra connections - allowing single point termination of wiring for limit switches and solenoid valves. This product is available to mount on Kinetrol models 03 - 30.
A rugged, corrosion-resistant pneumatic vane actuator with only a single moving part, the Kinetrol vane actuator is warranted to operate trouble-free for four million cycles.
This is the Kinetrol Vane Actuator general product catalog, which includes pneumatic actuators, spring return units, positioners, indicators, limit switches, solenoid valves, and other valve actuation equipment.
This document provides specifications for Lowara e-SV series electric pumps. It describes the pumps' construction as vertical multistage centrifugal pumps with stainless steel liquid ends. It lists the pump sizes and their flow rates, pressure capabilities, and motor power ranges. It also provides details on pump components like motors, seals, and materials of construction.
The TorkWrench 10-100 iron roughneck provides up to 100,000 ft-lbs of torque for makeup and breakout jobs using a three-jaw gripping system and high-torque three-roller spinning system. It has an intelligent pneumatic control system and distributes load equally to reduce damage to tool joints. The unit is versatile and can be used on land or offshore as well as converted to a mobile bucking unit for offline assembly of tools.
The document describes a heavy duty, weather sealed switch system called the Uni-Switch. It has over 50 switch and lens combinations, 6 rocker actuator sizes, and adapters for most vehicle dash panels. The Uni-Switch is tested for 50,000 cycles, has silver plated contacts, and white LED multi-voltage illumination. It provides a universal, plug-and-play switch solution for various vehicle applications.
This document provides information on the 20 and 25 Series Pressure SWICHGAGE®, which are combination indicating gauges and limit switches. They have a dial gauge to indicate pressure and built-in electrical switches that can trigger alarms or shut downs when the pressure reaches an adjustable limit. The gauges come in various pressure ranges and models with different switch configurations. They are designed to monitor systems like engine lubrication pressure to protect equipment.
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng Catalog báo mức loại xoay dòng NM, NL, FL của thương hiệu Kansai Automation. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
Perfect Engineers is an Indian company established in 1988 that manufactures quick-release couplings and valves. It provides products in materials like carbon steel, stainless steel, brass, and others. The document includes details on the company's product range, materials, specifications, dimensions, and applications for various quick connectors, ball valves, needle valves, and other components. It also provides guidelines for safe handling of hydraulic quick couplers.
This document provides an overview of flow control products from Worldwide Oilfield Machine (WOM), including plug valves, choke valves, flowback chokes, flowline equipment, hammer unions, pup joints, hose loops, swivel joints, and manifolds. It describes the specifications and features of these products, which are designed for applications in drilling, production, and pressure pumping and can withstand pressures up to 15,000 psi. WOM offers a full range of well service solutions and flow control equipment through its global manufacturing and distribution network.
This document is a flyer from a HVAC supply company promoting their products, services, and ongoing promotions. It provides details on compressor replacement kits, filters, motors, thermostats, and other HVAC parts. It encourages signing up for their rewards program to earn discounts and enter prize drawings in May and June. Contact information is provided for compressor pricing and more information.
Flowserve manufactures Automax Valve Automation Systems to provide full service valve and damper automation to the worldwide oil and gas, pulp and paper, chemical, processing and energy related industries.
The document discusses inductive position sensors from ifm electronic for providing feedback on valve positions. It describes several sensor models for different applications including rising stem valves, quarter-turn actuators, and dual sensors for open/closed detection. The sensors are designed to be robust, food-grade compatible, and provide ingress protection. Accessories like target pucks and mounting adapters allow the sensors to work with many valve types.
This document provides installation and maintenance instructions for Rotork's CVQ Series quarter-turn control valve actuators. It contains information on hazardous area approvals, health and safety, storage, operation, installation including mounting and cable connections, commissioning, and diagnostics. The actuators are self-contained electric actuators for remote operation of control valves in hazardous and non-hazardous areas.
2-JAW PARALLEL GRIPPER
Equipped with two parallel gripper fingers, RÖHM grippers are optimally suited for universal gripping of round and angular workpieces. Especially on robots or portals, the 2-jaw parallel grippers will convince you with their compact design, low own weight and high gripping force.
Advantages
- High gripping force with low own weight and compact design
- Maximum flexibility thanks to versatile connection and fastening options
- Long service life and high reliability thanks to specially ground base jaws in proven T-slot guide
3-JAW CENTRIC GRIPPER
Equipped with three centrically arranged gripper fingers, RÖHM RZP grippers are optimally suited for universal and self-centering gripping of round workpieces. Especially on robots or portals, the 3-jaw centric grippers will convince you with their compact design, low dead weight and high gripping force.
Advantages
-High gripping force with low dead weight and compact design
-Maximum flexibility thanks to versatile connection and fastening options
-Long service life and high reliability thanks to specially ground base jaws in proven
T-slot guide
2-JAW LONG STROKE GRIPPER
The 2-jaw long stroke gripper allows for large jaw strokes, thanks to its design, and is therefore optimally suited for handling large parts and a high part diversity. Due to the sealed guide, it is often used in rough environments. The centric clamping is realized via the synchronization of the two toothed racks with a gear wheel.
Advantages
-High gripping force with simultaneously high jaw stroke by means of double-acting pressure pistons
-High torque support for using long gripper fingers by means of robust flat guide
-Sealed for rough ambient conditions with quad-ring seal and highly precise intermediate jaws
http://eshop.roehm.biz/roehm_de_de/online-shop/automatisierungstechnik.html
Tolomatic erd electric rod style actuator brochureElectromate
The document provides information about the ERD electric rod-style actuator from Tolomatic. The ERD is an economical electric actuator that can replace pneumatic cylinders. It is available in various sizes and configurations, including all stainless steel options for wash-down environments. The document includes specifications, dimensions, performance data, and application examples for the ERD actuator.
The document discusses hazardous location solutions from ASCO, including solenoid-operated valves. ASCO offers valves that are approved by global regulatory agencies and certified for use in hazardous environments worldwide. The valves are available in various models and constructions for applications such as oil, gas, chemical processing and more. ASCO provides expertise to help customers select the appropriate valves and solve application problems.
Shakers are used to simulate predetermined mechanical vibration environments. They transform an input signal into motion and are used for shock and vibration studies, endurance testing and modal testing. Dewesoft shakers are compact, lightweight and powerful general-purpose shakers which can be used for modal and vibration testing.
This document provides information on various door hardware products from International Door Closers including:
- Overhead concealed door closer models 200, 200SA, 300, and 500.
- Surface mounted door closer models 44CI, 5000, 800, and 1800.
- Pedestrian gate closer model Swinger 300.
- Deadlocks, deadlatches, cylinder guards, dummy cylinders, and rim cylinders.
The document describes the features, functions, and specifications of these hardware items. It also lists available finishes, cylinder backsets, and compliance standards. Product images and diagrams are provided.
Dayton AC axial fans are described and instructions are provided. The document provides specifications and performance details for various Dayton axial fan models. It describes the fans' construction and materials. Safety information is presented and instructions are given for installation, operation, and maintenance. A limited warranty from Dayton Electric Mfg. Co. is also detailed.
The document is a product selection guide from ServoTek Products that includes information about their tachometers, encoders, and transducers. It describes ServoTek as a manufacturer of instrument-grade DC tachometers and encoders for aerospace, automotive, industrial, and other applications. It provides specifications for their various tachometer models, which are grouped by series based on armature length and output voltage. Mounting dimensions and technical specifications are also included to help customers select the appropriate product for their needs.
Kansai catalogkansainmnlflseries dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The AP pneumatic positioner from Kinetrol combines smooth and accurate mechanical positioning technology with convenient design features. It uses a proportional spool valve and force balance mechanism to precisely control actuators. The positioner is robust and adaptable, with options for high flow valves, housing styles, position monitoring, and I/P converters. It provides reliable, industrial-grade performance for process control applications.
GE Oil & Gas offers, under their Becker brand name, segmented valve rotary control valves known throughout the world for quality and durability. Becker valves have a proven track record, installed in a variety of process industries and applications. Segmented ball rotary valves offer dependability and a unique combination of high capacity and turndown capability.
Catalog đèn báo nút nhấn công tắc IDEC (Nhật Bản) - dòng TWCTY TNHH HẠO PHƯƠNG
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng Catalog về đèn báo, nút nhấn, công tắc xoay Idec (Nhật Bản) phi 22 dòng TW. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
Điểm đặc biệt của đèn báo IDEC phi 22 là có thể dễ dàng chuyển đổi từ phi 22 sang phi 25, điều mà hiếm có sản phẩm nào trên thị trường có thể làm được.
This document summarizes support stands and accessories for pilot-scale reactors from 10L to 150L sold by Ace Glass. The stands have an open frame design for maximum access and can support cylindrical or round-bottom flasks from 10L to 150L. The stands come with motor mounts or flange clamps and the materials are stainless steel or powder coated aluminum. Additional accessories include safety shields, shelves, and different sized clamps. The document also lists motor options for mounting to the stands including air motors, hazardous duty motors and controllers, and brushless DC motors.
The document provides an overview of rotary switches and mechanical encoders made by Grayhill Inc. It describes different types of single-deck and multi-deck rotary switches, including key lock versions, and their applications. It also outlines various mechanical encoder types and accessories available from Grayhill.
The document describes a heavy duty, weather sealed switch system called the Uni-Switch. It has over 50 switch and lens combinations, 6 rocker actuator sizes, and adapters for most vehicle dash panels. The Uni-Switch is tested for 50,000 cycles, has silver plated contacts, and white LED multi-voltage illumination. It provides a universal, plug-and-play switch solution for various vehicle applications.
This document provides information on the 20 and 25 Series Pressure SWICHGAGE®, which are combination indicating gauges and limit switches. They have a dial gauge to indicate pressure and built-in electrical switches that can trigger alarms or shut downs when the pressure reaches an adjustable limit. The gauges come in various pressure ranges and models with different switch configurations. They are designed to monitor systems like engine lubrication pressure to protect equipment.
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng Catalog báo mức loại xoay dòng NM, NL, FL của thương hiệu Kansai Automation. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
Perfect Engineers is an Indian company established in 1988 that manufactures quick-release couplings and valves. It provides products in materials like carbon steel, stainless steel, brass, and others. The document includes details on the company's product range, materials, specifications, dimensions, and applications for various quick connectors, ball valves, needle valves, and other components. It also provides guidelines for safe handling of hydraulic quick couplers.
This document provides an overview of flow control products from Worldwide Oilfield Machine (WOM), including plug valves, choke valves, flowback chokes, flowline equipment, hammer unions, pup joints, hose loops, swivel joints, and manifolds. It describes the specifications and features of these products, which are designed for applications in drilling, production, and pressure pumping and can withstand pressures up to 15,000 psi. WOM offers a full range of well service solutions and flow control equipment through its global manufacturing and distribution network.
This document is a flyer from a HVAC supply company promoting their products, services, and ongoing promotions. It provides details on compressor replacement kits, filters, motors, thermostats, and other HVAC parts. It encourages signing up for their rewards program to earn discounts and enter prize drawings in May and June. Contact information is provided for compressor pricing and more information.
Flowserve manufactures Automax Valve Automation Systems to provide full service valve and damper automation to the worldwide oil and gas, pulp and paper, chemical, processing and energy related industries.
The document discusses inductive position sensors from ifm electronic for providing feedback on valve positions. It describes several sensor models for different applications including rising stem valves, quarter-turn actuators, and dual sensors for open/closed detection. The sensors are designed to be robust, food-grade compatible, and provide ingress protection. Accessories like target pucks and mounting adapters allow the sensors to work with many valve types.
This document provides installation and maintenance instructions for Rotork's CVQ Series quarter-turn control valve actuators. It contains information on hazardous area approvals, health and safety, storage, operation, installation including mounting and cable connections, commissioning, and diagnostics. The actuators are self-contained electric actuators for remote operation of control valves in hazardous and non-hazardous areas.
2-JAW PARALLEL GRIPPER
Equipped with two parallel gripper fingers, RÖHM grippers are optimally suited for universal gripping of round and angular workpieces. Especially on robots or portals, the 2-jaw parallel grippers will convince you with their compact design, low own weight and high gripping force.
Advantages
- High gripping force with low own weight and compact design
- Maximum flexibility thanks to versatile connection and fastening options
- Long service life and high reliability thanks to specially ground base jaws in proven T-slot guide
3-JAW CENTRIC GRIPPER
Equipped with three centrically arranged gripper fingers, RÖHM RZP grippers are optimally suited for universal and self-centering gripping of round workpieces. Especially on robots or portals, the 3-jaw centric grippers will convince you with their compact design, low dead weight and high gripping force.
Advantages
-High gripping force with low dead weight and compact design
-Maximum flexibility thanks to versatile connection and fastening options
-Long service life and high reliability thanks to specially ground base jaws in proven
T-slot guide
2-JAW LONG STROKE GRIPPER
The 2-jaw long stroke gripper allows for large jaw strokes, thanks to its design, and is therefore optimally suited for handling large parts and a high part diversity. Due to the sealed guide, it is often used in rough environments. The centric clamping is realized via the synchronization of the two toothed racks with a gear wheel.
Advantages
-High gripping force with simultaneously high jaw stroke by means of double-acting pressure pistons
-High torque support for using long gripper fingers by means of robust flat guide
-Sealed for rough ambient conditions with quad-ring seal and highly precise intermediate jaws
http://eshop.roehm.biz/roehm_de_de/online-shop/automatisierungstechnik.html
Tolomatic erd electric rod style actuator brochureElectromate
The document provides information about the ERD electric rod-style actuator from Tolomatic. The ERD is an economical electric actuator that can replace pneumatic cylinders. It is available in various sizes and configurations, including all stainless steel options for wash-down environments. The document includes specifications, dimensions, performance data, and application examples for the ERD actuator.
The document discusses hazardous location solutions from ASCO, including solenoid-operated valves. ASCO offers valves that are approved by global regulatory agencies and certified for use in hazardous environments worldwide. The valves are available in various models and constructions for applications such as oil, gas, chemical processing and more. ASCO provides expertise to help customers select the appropriate valves and solve application problems.
Shakers are used to simulate predetermined mechanical vibration environments. They transform an input signal into motion and are used for shock and vibration studies, endurance testing and modal testing. Dewesoft shakers are compact, lightweight and powerful general-purpose shakers which can be used for modal and vibration testing.
This document provides information on various door hardware products from International Door Closers including:
- Overhead concealed door closer models 200, 200SA, 300, and 500.
- Surface mounted door closer models 44CI, 5000, 800, and 1800.
- Pedestrian gate closer model Swinger 300.
- Deadlocks, deadlatches, cylinder guards, dummy cylinders, and rim cylinders.
The document describes the features, functions, and specifications of these hardware items. It also lists available finishes, cylinder backsets, and compliance standards. Product images and diagrams are provided.
Dayton AC axial fans are described and instructions are provided. The document provides specifications and performance details for various Dayton axial fan models. It describes the fans' construction and materials. Safety information is presented and instructions are given for installation, operation, and maintenance. A limited warranty from Dayton Electric Mfg. Co. is also detailed.
The document is a product selection guide from ServoTek Products that includes information about their tachometers, encoders, and transducers. It describes ServoTek as a manufacturer of instrument-grade DC tachometers and encoders for aerospace, automotive, industrial, and other applications. It provides specifications for their various tachometer models, which are grouped by series based on armature length and output voltage. Mounting dimensions and technical specifications are also included to help customers select the appropriate product for their needs.
Kansai catalogkansainmnlflseries dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The AP pneumatic positioner from Kinetrol combines smooth and accurate mechanical positioning technology with convenient design features. It uses a proportional spool valve and force balance mechanism to precisely control actuators. The positioner is robust and adaptable, with options for high flow valves, housing styles, position monitoring, and I/P converters. It provides reliable, industrial-grade performance for process control applications.
GE Oil & Gas offers, under their Becker brand name, segmented valve rotary control valves known throughout the world for quality and durability. Becker valves have a proven track record, installed in a variety of process industries and applications. Segmented ball rotary valves offer dependability and a unique combination of high capacity and turndown capability.
Catalog đèn báo nút nhấn công tắc IDEC (Nhật Bản) - dòng TWCTY TNHH HẠO PHƯƠNG
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng Catalog về đèn báo, nút nhấn, công tắc xoay Idec (Nhật Bản) phi 22 dòng TW. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
Điểm đặc biệt của đèn báo IDEC phi 22 là có thể dễ dàng chuyển đổi từ phi 22 sang phi 25, điều mà hiếm có sản phẩm nào trên thị trường có thể làm được.
This document summarizes support stands and accessories for pilot-scale reactors from 10L to 150L sold by Ace Glass. The stands have an open frame design for maximum access and can support cylindrical or round-bottom flasks from 10L to 150L. The stands come with motor mounts or flange clamps and the materials are stainless steel or powder coated aluminum. Additional accessories include safety shields, shelves, and different sized clamps. The document also lists motor options for mounting to the stands including air motors, hazardous duty motors and controllers, and brushless DC motors.
The document provides an overview of rotary switches and mechanical encoders made by Grayhill Inc. It describes different types of single-deck and multi-deck rotary switches, including key lock versions, and their applications. It also outlines various mechanical encoder types and accessories available from Grayhill.
GEMS offers a choice of pressure switches, from compact cylindrical
models for OEM use, to larger, enclosed units for rugged process
applications. These switches are ideal for the filtering process of
coolants in the machine tool industry, use in transmissions of
off-highway vehicles and as redundant systems with existing monitors
such as transducers.
Manufacturer of all Electric Control Gears for EOT CraneAnand Control
We take this opportunity to introduce ourselves “ANAND SYSTEMS ENGINEERING PVT. LTD.” As leading manufacturer of electrical control gears suitable for different types of EOT cranes in India. We are renowned both for the quality of the products as well as strategy of our after sales services.
Catalog thiết bị đóng cắt Fuji Electric - 03 - Control Relays & Timer
*********************************************************************
CTY TNHH HẠO PHƯƠNG - Nhà phân phối chính thức các thiết bị điện công nghiệp và tự động hóa của hãng FUJI ELECTRIC JAPAN tại Việt Nam
Xem chi tiết các sản phẩm Fuji Electric tại
http://haophuong.com/b1033533/fuji-electric
Presentation of CKD Corporation in pneumatic division.
You can find those products in Brazil by Italpneumatica Automação. www.italpneumatica.com (11) 4177-1010
Catalog đèn báo nút nhấn Fuji Electric Nhật bảnBeeteco
Catalog đèn báo nút nhấn Fuji Electric Nhật bản
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Địa chỉ : Số 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương
FB: www.facebook.com/beeteco
Email: contact@beeteco.com
Tel: 0650 3617 012
Hotline: 0909.41.61.43
This document summarizes the Warren Controls ILEA series of industrial linear electric actuators. It describes the small, medium, and large frame sizes available, with thrust forces ranging from 450 to 5,600 pounds. The actuators can withstand temperatures up to 158 degrees Fahrenheit and have IP65 and IP67 enclosure ratings. The document provides specifications for the ILEA-F small frame and ILEA-A/B medium frame actuators.
Wraparound is a Honeywell's widely trusted brand of modular switches. Completely modular in design, it gives maximum flexibility in choosing any combination of switches, sockets and accessories to suit specific user requirements. To suit varied interiors, it is available in a variety of modules.
Visit - https://www.honeywellsmarthomes.com/electrical-products
The document provides information about the Wraparound range of modular switches and accessories from Honeywell MK. It describes the Wraparound, Wraparound Plus, and Antiquity product lines which offer flexibility through modular design and come in various colors. Product features include modularity, quality materials, safety aspects, and convenience features. Accessories like switches, sockets, data jacks, and support items are also detailed. Technical specifications and dimensions are provided for sample infills.
Honeywell offers a wide range of Wraparound electric modular switches, light switch online for home in India at reasonable prices. You can find these smart electrical switches at Honeywell.
Most Trusted Brand of Modular Switches and Sockets – Honeywell WraparoundNeha Goyal
Wraparound is Honeywell MK’s widely trusted brand of modular switches. Completely modular in design, it gives maximum flexibility in choosing any combination of switches, sockets and accessories to suit specific user requirements. To suit varied interiors, it is available in a variety of modules. Visit to know more about Honeywell Modular switch and sockets visit: https://www.honeywellsmarthomes.com/electrical-products/
This document provides information about jacketed reactors and motor options from Ace Glass. It describes their universal stand design that allows vessels from 10L to 50L and different motor mounting configurations. It lists the components included with 30L and 50L base systems. Finally, it discusses additional motor options like air motors, hazardous duty motors, and brushless motors of various speeds and torques that can be used with their reactor systems.
This document provides technical data for ABB's OT series of switch-disconnectors ranging from 16A to 3150A, including information on:
- Rated voltage, insulation, breaking capacity, and short circuit ratings
- Rated operational and breaking currents for AC and DC applications
- Power loss and mechanical endurance specifications
- Dimensional and connection details
The switch-disconnectors can be used in motor control centers, switchboards, and industrial equipment. The technical data follows IEC standards and allows selection of the appropriate switch-disconnector for an application based on required ratings.
KB Electric may bien ap kho Ls nhap khau KoreaKB ELECTRIC
This document provides information on LS Cast Resin transformers ranging from 50kVA to 15,000kVA. It discusses the construction of the transformers, which uses a vacuum casting process to fully embed the windings in epoxy resin. Tables provide the technical specifications and performance data for the transformers according to IEC standards. The document also outlines the manufacturing process and quality assurance testing performed on the transformers.
Máy biến áp do tập đoàn LS sản xuất cũng thuộc nhóm sản phẩm cao cấp của thế giới, hiện đang được bán đại trà cho Mỹ, Nhật, Canada, Trung đông, Asia. Các tập đoàn công nghệ hàng đầu như Mitsubishi, Hitachi, Fuji, Siemens,….cũng đang là khách hàng của sản phẩm này trên phạm vi toàn cầu. Hiện LS cũng là một trong những nhà cung cấp Biến thế khô chính của Việt nam với các công trình tiêu biểu như :Royal City, Time City, Nam Á Bank, Air Cargo, Việt Thuận Thành Tower, Lim Tower, Thảo Điền Pearl, Petrovietnam Power Landmark, Petroland Quận 2, Diamond Island, The Era, Royal City, Cresent Mall, Petroland Tower tại Phú Mỹ Hưng, Dragon Hill Residence, Belleza, Khách sạn Continential, Khách sạn Rex, Khách sạn 5 sao Le Meriden, Phú Quốc Airport, Saigon Airport Plaza, Times City, Star City...
Similar to Honeywell sensing-micro-switch-ls-product-sheet-00-1222003 (20)
Google Calendar is a versatile tool that allows users to manage their schedules and events effectively. With Google Calendar, you can create and organize calendars, set reminders for important events, and share your calendars with others. It also provides features like creating events, inviting attendees, and accessing your calendar from mobile devices. Additionally, Google Calendar allows you to embed calendars in websites or platforms like SlideShare, making it easier for others to view and interact with your schedules.
2. 2 sensing.honeywell.com
What makes our switches better?
Small size and universal mounting footprint may allow for use in
constricted spaces
IP67 and NEMA 1, 3, 4, 6 and 13 ratings available provide a
dependable solution in most demanding environmental conditions
Rugged die-cast metal construction with a wide variety of heads
and actuators provides long life across numerous applications
MICRO SWITCH™ legacy and expertise - over 55 years of
engineering excellence and experience with industrial limit
switches
MICRO SWITCH™ LS
General Purpose Limit Switches
The Honeywell MICRO SWITCH™ Compact LS Limit Switch Series offers products that have a long record of successful
performance in a diverse range of industrial applications. Under severe conditions, its durable and dependable design provides
longevity, precision, and consistent repeatability over millions of operations.
The compact size and adjustable features propel the LS Series to flourish in a variety of settings under space constraint without
sacrificing reliability. Its construction is oil-tight, water-tight and dust tight, and includes die-cast housing, heads and actuators.
An assortment of heads and actuators provides a solution for a variety of applications.
QUALITY, RELIABLE
RUGGED, GLOBAL
Rugged, metal housing
packaged for industrial indoor
and outdoor applications
3. 3sensing.honeywell.com
Features
and Benefits
Features
and Benefits
ENHANCED PERFORMANCE COMPACT DESIGN
Along with industry standard mounting dimensions, the LS Series compact design
allows installation in applications under space constraint while still providing reliable
switching performance
TWO CIRCUIT DOUBLE BREAK CONTACTS
With an AC15, A300 or 10 A electrical rating, the LS Series provides dependable
and consistent switching, giving the end users control of two circuits in one switch
ACTUATORS FOR YOUR APPLICATION
With many actuators available such as side rotary, plunger, wobble stick and roller
plunger, the LS Series is adaptable and has the ability to be applied in a variety of
applications
SEALED CONSTRUCTION
In demanding environmental conditions, IP67 or NEMA 1, 3, 4, 6, and 13 sealing
protects against oil, dust and water making the LS Series a dependable solution in
a variety of conditions for both indoor and outdoor applications
One switch controls two circuits!
MACHINE TOOL EQUIPMENT
Part presence, machine slide/table position, panel and door presence
MATERIAL HANDLING
Sensing in overhead doors, door interlock, dock locks, conveyance, storage
retrieval, carousels, conveyors, and assembly lines
VALVE ACTUATION
Position sensing of electric valves for waste water treatment plants, power plants,
refineries, and pipelines
FOOD AND BEVERAGE
Sensing during bottling, canning, and packaging
SPECIAL MACHINERY
Assembly, packaging and testing applications
Potential Applications
4. 4 sensing.honeywell.com
LS Series
MICRO SWITCH™ LS SERIES PRODUCT NOMENCLATURE
Switch body
Compact
SPDT
SPDT
Plug-
in less
base
Switch style
Prod-
uct
family
Actuator
code
Actuator description
Modifications
(may be applied to most
configurations)
1 201
side rotary
(momentary)
CW and CCW
actuation. Field
adjustable for CW
and CCW
LS
1
standard with 38,1 mm fixed length lever
with steel roller
(blank)
0.5-14 NPT conduit
-L
UL/CSA certified with 0.5-14
NPT conduit
-4C
CE with 20 mm conduit
-4PG
CE with PG 13,5 mm conduit
19
low pretravel with 38,1 mm fixed length
lever with steel roller
6
low operating torque with 38,1 mm fixed
length lever with steel roller
131
low pretravel, low operating torque with
38,1 mm fixed length lever with steel roller
3
standard with adjustable length lever,
38 mm to 89 mm with nylon roller
10
standard with adjustable 127 mm
aluminum rod
2 standard, no lever
9 low pretravel with no lever
23 low operating torque with no lever
56
low pretravel, low operating torque with
no lever
2
202 top pin plunger
LS
1 standard
n/a top pin plunger 111 plunger boot seal
3 203 side roller plunger LS 1 standard
4 204 side pin plunger LS 1 standard
5
205 top roller plunger
LS
1 standard
n/a top roller plunger 8 plunger boot seal
6 206
two position side
rotary (maintained)
LS
1
standard with 38,1 mm fixed length fork
lever with roller
2 no lever
7 n/a
side rotary enclo-
sure mount
LS 1
standard with 38,1 mm fixed length lever
with steel roller
8
208 wobble actuator
LS
1 steel coil spring, 141 mm
208 wobble actuator 3 aluminum rod, 141 mm
208 wobble actuator 125 cat whisker, 191 mm
208 wobble actuator 152
stainless steel coil spring,
141 mm
Not all combinations are available. Please contact your Honeywell provider/representative for assistance.
5. 5sensing.honeywell.com
MICRO SWITCH™ General Purpose Limit Switches
Table 1. Specifications
Characteristic North America EMEA (Europe)
Product type
Honeywell general purpose LS limit switch,
compact and plug-in
Honeywell general purpose LS-4 limit switch,
compact and plug-in
Acutators
side rotary, side rotary (maintained) top pin plunger, top roller plunger, wobble coil spring,
wobble aluminum rod, wobble cat whisker, wobble sst coil spring
Circuitry single pole double throw (SPDT) double break, single pole double throw (SPDT) double break
Electrical 10 A (see Table 2) AC 15, A300; DC 13, P300
Housing material
compact: epoxy coated zinc die cast
plug-in: epoxy coated aluminum die cast
epoxy coated aluminum die cast
Conduit 0.5 – 14 NPT 20 mm or PG13,5
Housing seal rating NEMA 1,3,4, 6 and 13 IP67, NEMA 1,4 and 13
Operating temperature
standard: -29 °C to 71 °C [-20 °F to 160 °F]
high temp.: -29 °C to 120 °C [-20 °F to 248 °F]
standard: -30 °C to 70 °C [-22 °F to 158 °F]
high temp.: -30 °C to 120 °C [-22 °F to 248 °F]
Agency certifications Compact with –L suffix UL file 12252, CSA file 57325 CE, EN60947-5-41, IEC60947-5-4
Table 2. Electrical Ratings
Electrical
Code
Electrical Ratings
A 10 A, 120, 240 or 480 Vac; 1/3 hp 120 Vac; 3/4 hp 240 Vac; 0.8 amp, 115 Vdc;
0.4 amp, 230 Vdc; 0.1 amp, 550 Vdc, Pilot Duty, 600 Vac max.
B 10 A, 120, 240 or 480 Vac; 1/4 hp 120 Vac; 1/2 hp 240 Vac; Pilot Duty, 600 Vac max.
C 10 A, 1/3 hp 120 Vac
D 10 A, 120, 240 or 480 Vac; 1/4 hp 120 Vac; 1/2 hp 240 Vac; 0.8 amp, 115 Vdc; 0.4 amp, 230 Vdc;
0.1 amp, 550 Vdc, Pilot Duty, 600 Vac max.
E 10 A, 120, 240 or 480 Vac; 1/3 hp 120 Vac; 3/4 hp 240 Vac; Pilot Duty, 600 Vac max.
F 5 A, 6 V; 1 A, 24 V; 0.4 A, 220 V
G UL & CSA; 10 A, 125, 250 or 480 Vac; 1/3 hp 125 Vac; 3/4 hp 250 Vac; 0.8 amp, 115 Vdc; 0.4 amp, 230 Vdc
H UL & CSA; 10 A, 125, 250 or 480 Vac; 1/4 hp 125 Vac; 1/2 hp 250 Vac; 0.8 amp, 115 Vdc; 0.4 amp, 230 Vdc
J
EN60947-5-1, IEC 60947-5-1
Designation &
Category
Thermal Current,
It(Amps)
Rated Operational
Voltage, Ue
Rated Operational
Amps, Ie
VA rating Make VA rating Break
ac
AC15, A300 10 120 6 7200 720
AC15, A300 10 240 3 7200 720
dc
DC13, P300 5 125 1.1 138 138
DC13, P300 5 250 0.55 138 138
6. 6 sensing.honeywell.com
LS Series
MICRO SWITCH™ LS SERIES ORDER GUIDE/RECOMMENDED LISTINGS (FOR NORTH AMERICA)
For listings not shown, contact your Honeywell representative.
Table 3. Side Rotary (Momentary), Standard Roller Lever
Compact, SPDT
w 0.5-14 NPT
conduit
Plug-in less
base*
Description
Electrical
Rating
(Table 2)
1LS1 201LS1 side rotary w/ 38,1mm [1.5 in] fixed lever, steel roller A
1LS1-L – side rotary w/ 38,1mm [1.5 in] fixed lever, steel roller G
1LS2 – side rotary, no lever A
1LS2-L – side rotary, no lever G
1LS243 201LS242 side rotary w/ 38,1mm [1.5 in] fixed lever, steel roller A
1LS6 201LS6 side rotary w/ 38,1 mm [1.5 in] fixed lever, steel roller A
1LS6-L – side rotary w/ 38,1 mm [1.5 in] fixed lever, steel roller G
1LS23 201LS23 side rotary, no lever A
1LS501 201LS501 side rotary w/ 38,1mm [1.5 in] fixed lever, steel roller C
1LS19 201LS19 side rotary w/ 38,1mm [1.5 in] fixed lever, steel roller B
1LS9 201SL9 side rotary, no lever B
1LS131 – side rotary w/ 38,1 mm [1.5 in] fixed lever, steel roller B
1LS56 201LS56 side rotary, no lever B
1
Contact closed n; Contact open o. *Requires an 18PA1 Terminal Block (base receptacle) which must be ordered separately. 18PA1 terminal block has 0.5-14 NPT conduit threads.
Table 4. Side Rotary (Maintained), Standard Fork Roller Lever
Compact, SPDT
w 0.5-14 NPT
conduit
Plug-in less base* Description
Electrical
Rating
(Table 2)
6LS1 206LS1
side rotary maintained w/ 38,1mm [1.5 in] fork lever, steel rollers,
opposite side
A
6LS2 206LS2 side rotary maintained, no lever A
6LS2-L – side rotary maintained, no lever G
6LS3 –
side rotary maintained w/ 38,1mm [1.5 in] fork lever, nylon rollers,
same side
A
1
Contact closed n; Contact open o. *Requires an 18PA1 Terminal Block (base receptacle) which must be ordered separately. 18PA1 terminal block has 0.5-14 NPT conduit threads.
8. 8 sensing.honeywell.com
LS Series
Table 5. Side Rotary, Adjustable Roller Lever
Compact, SPDT
w 0.5-14 NPT
conduit
Plug-in less base* Description
Electrical
Rating
(Table 2)
1LS3 201LS3
side rotary w/ 38,1 mm to 88,9mm [1.5 in to 3.5 in]
adjustable lever, nylon roller
A
1LS3-L –
side rotary w/ 38,1 mm to 88,9mm [1.5 in to 3.5 in]
adjustable lever, nylon roller
G
1LS58 –
side rotary w/ 38,1 mm to 88,9mm [1.5 in to 3.5 in]
adjustable lever, nylon roller
B
1LS59 –
side rotary w/ 38,1 mm to 88,9mm [1.5 in to 3.5 in]
adjustable lever, nylon roller
B
1
Contact closed n; Contact open o. *Requires an 18PA1 Terminal Block (base receptacle) which must be ordered separately. 18PA1 terminal block has 0.5-14 NPT conduit threads.
Table 6. Side Rotary, Adjustable Rod Lever
Compact, SPDT
w 0.5-14 NPT
conduit
Plug-in less base* Description
Electrical
Rating
(Table 2)
1LS10 201LS10 side rotary w/ 140 mm [5.5 in] max. adjustable aluminum rod A
1LS10-L – side rotary w/ 140 mm [5.5 in] max. adjustable aluminum rod G
1LS47 201LS47 side rotary w/ 140 mm [5.5 in] max. adjustable aluminum rod B
1LS53 201LS51 side rotary w/ 140 mm [5.5 in] max. adjustable aluminum rod B
1
Contact closed n; Contact open o. *Requires an 18PA1 Terminal Block (base receptacle) which must be ordered separately. 18PA1 terminal block has 0.5-14 NPT conduit threads.
MICRO SWITCH™ LS SERIES ORDER GUIDE/RECOMMENDED LISTINGS (FOR NORTH AMERICA)
For listings not shown, contact your Honeywell representative.
10. 10 sensing.honeywell.com
LS Series
Table 7. Top Pin Plunger
Compact, SPDT
w 0.5-14 NPT
conduit
Plug-in less base* Description
Electrical
Rating
(Table 2)
Operating
Torque or
Force
2LS1 202LS1 Top pin plunger (hardened SST) A
31,1 N
[7.0 lb]
2LS1-L – Top pin plunger (hardened SST) G
31,1 N
[7.0 lb]
2LS111 202LS111
Top pin plunger (hardened SST)
with boot seal
E
10,0 N
[2.2 lb]
1
Contact closed n; Contact open o. NOTE: Bar chart measurements are in millimeters.
*Requires an 18PA1 Terminal Block (base receptacle) which must be ordered separately. 18PA1 terminal block has 0.5-14 NPT conduit threads.
Table 8. Top Roller Plunger
Compact, SPDT
w 0.5-14 NPT
conduit
Plug-in less base* Description
Electrical
Rating
(Table 2)
Operating
Torque or
Force
5LS1 205LS1 Top roller plunger (hardened steel roller) A
31,1 N
[7.0 lb]
5LS1-L – Top roller plunger (hardened steel roller) G
31,1 N
[7.0 lb]
5LS8 –
Top roller plunger (hardened steel roller)
with boot seal
15,57 N
[3.5 lb]
1
Contact closed n; Contact open o. NOTE: Bar chart measurements are in millimeters.
*Requires an 18PA1 Terminal Block (base receptacle) which must be ordered separately. 18PA1 terminal block has 0.5-14 NPT conduit threads.
Table 9. Side Pin Plunger
Compact, SPDT
w 0.5-14 NPT
conduit
Plug-in less base* Description
Electrical
Rating
(Table 2)
Operating
Torque or
Force
4LS1 204LS1 Side pin plunger (SST) A
40,0 N
[9.0 lb]
1
Contact closed n; Contact open o. NOTE: Bar chart measurements are in millimeters.
*Requires an 18PA1 Terminal Block (base receptacle) which must be ordered separately. 18PA1 terminal block has 0.5-14 NPT conduit threads.
Table 10. Side Roller Plunger
Compact, SPDT
w 0.5-14 NPT
conduit
Plug-in less base* Description
Electrical
Rating
(Table 2)
Operating
Torque or
Force
3LS1 203LS1 Side roller plunger (hardened steel roller) A
40,0 N
[9.0 lb]
MICRO SWITCH™ LS SERIES ORDER GUIDE/RECOMMENDED LISTINGS (FOR NORTH AMERICA)
For listings not shown, contact your Honeywell representative.
11. 11sensing.honeywell.com
MICRO SWITCH™ General Purpose Limit Switches O.T. • Operating torque
O.F. • Operating force
R.P. • Release point
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
Bar Chart1
Free
Position
(nom.)
Operate Point
Pretravel
(max.)
Overtravel
(min.)
Differen-
tial Travel
(max.)
Notes
TT
1-2
3-4
35,5 33,78 27,43
3-4
1-2
OPFP
DT = 0,50
34,29
35,5 mm
[1.40 in]
33,78 mm ±0,78 mm
[1.33 in ±0.03 in]
1,65 mm
[0.065 in]
6,35 mm
[0.25 in]
0,51 mm
[0.02 in]
–
35,5 mm
[1.40 in]
33,78 mm ±0,78 mm
[1.33 in ±0.03 in]
1,65 mm
[0.065 in]
6,35 mm
[0.25 in]
0,51 mm
[0.02 in]
UL & CSA
TT
1-2
3-4
35,5 33,78 28,23
3-4
1-2
OPFP
DT = 0,23
28,46
35,5 mm
[1.40 in]
33,78 mm ±0,78 mm
[1.33 in ±0.03 in]
1,65 mm
[0.065 in]
5,6 mm
[0.22 in]
0,23 mm
[0.009 in]
lower operating force
Bar Chart1
Operate Point
Pretravel
(max.)
Overtravel
(min.)
Differen-
tial Travel
(max.)
Notes
TT
1-2
3-4
45,6 43,95 38,35
3-4
1-2
OPFP
DT = 0,51
44,46
45,6 mm
[1.80 in]
43,95 mm ±0,78 mm
[1.73 in ±0.03 in]
1,65 mm
[0.065 in]
5,6 mm
[0.22 in]
0,51 mm
[0.02 in]
–
45,6 mm
[1.80 in]
43,95 mm ±0,78 mm
[1.73 in ±0.03 in]
1,65 mm
[0.065 in]
5,6 mm
[0.22 in]
0,51 mm
[0.02 in]
UL & CSA
45,6 mm
[1.80 in]
43,95 mm ±0,78 mm
[1.73 in ±0.03 in]
1,65 mm
[0.065 in]
5,6 mm
[0.22 in]
0,51 mm
[0.02 in]
lower operating force
Bar Chart1
Free
Position
(nom.)
Operate Point
Pretravel
(max.)
Overtravel
(min.)
Differen-
tial Travel
(max.)
Notes
TT
1-2
3-4
56,4 54,10 47,75
3-4
1-2
OPFP
DT = 1,02
55,12
56,4 mm
[2.22 in]
54,10 mm ±0,78 mm
[2.13 in ±0.03 in]
2,77 mm
[0.11 in]
6,35 mm
[0.25 in]
1,02 mm
[0.04 in]
–
Bar Chart1
Free
Position
(nom.)
Operate Point
Pretravel
(max.)
Overtravel
(min.)
Differen-
tial Travel
(max.)
Notes
TT
1-2
3-4
70,35 67,56 61,21
3-4
1-2
OPFP
DT = 1,02
68,58
70,35 mm
[2.77 in]
67,56 mm ±0,78 mm
[2.66 in ±0.03 in]
2,79 mm
[0.11 in]
6,35 mm
[0.25 in]
1,02 mm
[0.04 in]
Roller plunger may be
locked in any position
through 360°
12. 12 sensing.honeywell.com
LS Series
MICRO SWITCH™ LS SERIES ORDER GUIDE/RECOMMENDED LISTINGS (FOR NORTH AMERICA)
For listings not shown, contact your Honeywell representative.
1
Contact closed n; Contact open o. NOTE: Bar chart measurements are in millimeters.
*Requires an 18PA1 Terminal Block (base receptacle) which must be ordered separately. 18PA1 terminal block has 0.5-14 NPT conduit threads.
Table 11. Side Rotary with Face Plate
Compact, SPDT
w 0.5-14 NPT
conduit
Plug-in less base Description
Electrical
Rating
(Table 2)
7LS1 –
Face plate with 1LS1 for enclosure installation with 38,1 mm [1.5 in] fixed
lever, steel roller
A
1
Contact closed n; Contact open o.
Table 12. Wobble, Coil Spring
Compact, SPDT
w 0.5-14 NPT
conduit
Plug-in less base* Description
Electrical
Rating
(Table 2)
8LS1 208LS1
Wobble actuated, random motion 141 mm [5.55 in] tin plated, coil spring
steel
D
8LS1-L –
Wobble actuated, random motion 141 mm [5.55 in] tin plated, coil spring
steel
H
8LS3 208LS3 Wobble actuated, random motion 141 mm [5.55 in] aluminum rod D
8LS125 208LS125
Wobble actuated, random motion 191 mm [7.53 in] stainless steel cat whis-
ker
D
8LS152 208LS152 Wobble actuated, random motion 141 mm [5.55 in] stainless steel coil spring D
1
Contact closed n; Contact open o. NOTE: Bar chart measurements are in millimeters.
*Requires an 18PA1 Terminal Block (base receptacle) which must be ordered separately. 18PA1 terminal block has 0.5-14 NPT conduit threads.
2
Operating position in any direction except pull.
13. 13sensing.honeywell.com
MICRO SWITCH™ General Purpose Limit Switches O.T. • Operating torque
O.F. • Operating force
R.P. • Release point
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
Operating
Torque or
Force
Bar Chart1
Operate Point
Pretravel
(max.)
Overtravel
(min.)
Differen-
tial Travel
(max.)
Notes
0,51 Nm [4.5
in-lb]
TT
1-2
3-4
0° 20° 50°
3-4
1-2
OPFP
DT = 12°
8°
– 20° 30° 12° –
Operating
Torque or
Force
Bar Chart1
Operate Point2
(max.)
Pretravel
(max.)
Overtravel
(nom.)
Differen-
tial Travel
(max.)
Notes
1,39 N
[5.0 oz]
TT
1-2
3-4
0 28,6
59,3
3-4
1-2
OPFP
(nom.)
RP
28,6 mm
[1.125 in]
28,6 mm
[1.125 in]
30,7 mm
[1.21 in]
– –
1,39 N
[5.0 oz]
28,6 mm
[1.125 in]
28,6 mm
[1.125 in]
30,7 mm
[1.21 in]
– UL & CSA
1,39 N
[5.0 oz]
28,6 mm
[1.125 in]
28,6 mm
[1.125 in]
30,7 mm
[1.21 in]
– –
0,28 N
[1.0 oz]
TT
1-2
3-4
0 63,5
127
3-4
1-2
OPFP
(nom.)
RP
63,5 mm
[2.5 in]
63,5 mm
[2.5 in]
63,5 mm
[2.5 in]
– –
1,39 N
[5.0 oz]
TT
1-2
3-4
0 28,6
59,3
3-4
1-2
OPFP
(nom.)
RP
28,6 mm
[1.125 in]
28,6 mm
[1.125 in]
30,7 mm
[1.21 in]
– –
14. 14 sensing.honeywell.com
LS Series
MICRO SWITCH™ LS SERIES ORDER GUIDE/RECOMMENDED LISTINGS (FOR EMEA/EUROPE)
For listings not shown, contact your Honeywell representative.
Table 13. Side Rotary (Momentary), Standard Roller Lever
Compact
20 mm
conduit
Compact
PG 13,5
conduit
Plug-in less
base*
Description
Electrical
Rating
(Table 2)
1LS1-4C 1LS1-4PG 201LS1-4 Side rotary, with 38,1 mm [1.5 in] fixed lever, steel roller J
1LS2-4C 1LS2-4PG 201LS2-4 Side rotary, no lever J
1LS243-4C 1LS243-4PG – Side rotary, with 38,1 mm [1.5 in] fixed lever, steel roller J
1LS244-4C 1LS244-4PG – Side rotary, with 38,1 mm [1.5 in] fixed lever, steel roller J
1LS19-4C 1LS19-4PG 201LS1-4 Side rotary, with 38,1 mm [1.5 in] fixed lever, steel roller J
1LS56-4C 1LS56-4PG 201LS56-4 Side rotary, lever J
1
Contact closed n; Contact open o. * Requires an 18PA1-4C Terminal Block (20 mm conduit threads) or 18PA1-4PG Terminal Block (PG13,5 conduit threads) ordered separately.
Terminal block is base receptacle.
Table 14. Side Rotary (Maintained), Fork Roller Lever
Compact
20 mm
conduit
Compact
PG 13,5
conduit
Plug-in less
base*
Description
Electrical
Rating
(Table 2)
6LS1-4C 6LS1-4PG 206LS1-4
Side rotary maintained with 38,1 mm fork lever with
steel rollers, opp. side
J
6LS3-4C 6LS3-4PG –
Side rotary maintained with 38,1 mm fork lever with
nylon rollers, same side
J
6LS2-4C 6LS2-4PG – Side rotary maintained, no lever J
1
Contact closed n; Contact open o. * Requires an 18PA1-4C Terminal Block (20 mm conduit threads) or 18PA1-4PG Terminal Block (PG13,5 conduit threads) ordered separately.
Terminal block is base receptacle.
Table 15. Side Rotary, Adjustable Roller Lever
Compact
20 mm
conduit
Compact
PG 13,5
conduit
Plug-in less
base*
Description
Electrical
Rating
(Table 2)
1LS3-4C 1LS3-4PG 201LS3-4
Side rotary, with 25 mm to 89 mm [1.0 in to 3.5 in] adjustable
lever, nylon roller
J
1
Contact closed n; Contact open o. * Requires an 18PA1-4C Terminal Block (20 mm conduit threads) or 18PA1-4PG Terminal Block (PG13,5 conduit threads) ordered separately.
Terminal block is base receptacle.
16. 16 sensing.honeywell.com
LS Series
MICRO SWITCH™ LS SERIES ORDER GUIDE/RECOMMENDED LISTINGS (FOR EMEA/EUROPE)
For listings not shown, contact your Honeywell representative.
Table 16. Side Rotary, Adjustable Rod Lever
Compact
20 mm
conduit
Compact
PG 13,5
conduit
Plug-in less
base*
Description
Electrical
Rating
(Table 2)
1LS10-4C 1LS10-4PG 201LS10-4 Side rotary with 140 mm [5.5 in] max. adjustable aluminum rod J
1LS47-4PG – – Side rotary with 140 mm [5.5 in] max. adjustable alumnum rod J
1
Contact closed n; Contact open o. * Requires an 18PA1-4C Terminal Block (20 mm conduit threads) or 18PA1-4PG Terminal Block (PG13,5 conduit threads) ordered separately.
Terminal block is base receptacle.
Table 17. Top Pin Plunger
Compact
20 mm
conduit
Compact
PG 13,5
conduit
Plug-in less
base*
Description
Electrical
Rating
(Table 2)
Operating
Torque or
Force
2LS1-4C 2LS1-4PG 202LS1-4 Top pin plunger (SST) J
31,4 N
[7.06 lb]
– 2LS1-4GPG – Top pin plunger (SST) F
31,4 N
[7.06 lb]
2LS1-4CN151 – – Top pin plunger (SST) J
31,4 N
[7.06 lb]
1
Contact closed n; Contact open o. NOTE: Bar chart measurements are in millimeters.
* Requires an 18PA1-4C Terminal Block (20 mm conduit threads) or 18PA1-4PG Terminal Block (PG13,5 conduit threads) ordered separately. Terminal block is base receptacle.
Table 18. Top Roller Plunger
Compact
20 mm
conduit
Compact
PG 13,5
conduit
Plug-in less
base*
Description
Electrical
Rating
(Table 2)
Operating
Torque or
Force
5LS1-4C 5LS1-4PG 205LS1-4 Top roller plunger (SST) J
31,4 N
[7.06 lb]
–
5LS1-G-
4PG
– Top roller plunger (SST) F
31,4 N
[7.06 lb]
5LS1-4CN152 – – Top roller plunger (SST) J
31,4 N
[7.06 lb]
1
Contact closed n; Contact open o. NOTE: Bar chart measurements are in millimeters.
* Requires an 18PA1-4C Terminal Block (20 mm conduit threads) or 18PA1-4PG Terminal Block (PG13,5 conduit threads) ordered separately. Terminal block is base receptacle.
17. 17sensing.honeywell.com
MICRO SWITCH™ General Purpose Limit Switches O.T. • Operating torque
O.F. • Operating force
R.P. • Release point
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
Operating Torque or
Force
Bar Chart1
Operate Point
Pretravel
(max.)
Overtravel
(min.)
Differen-
tial Travel
(max.)
Notes
0,51 N m [4.5 in-lb] TT
1-2
3-4
0° 20° 50°
3-4
1-2
OPFP
DT = 12°
8°
– 20° 30° 12°
0,51 N m [4.5 in-lb] TT
1-2
3-4
0° 5° 35°
3-4
1-2
OPFP
DT = 4°
1°
– 5° 30° 4° Low pretravel
Bar Chart1
Free
Position
(nom.)
Operate Point
Pretravel
(max.)
Overtravel
(min.)
Differen-
tial Travel
(max.)
Notes
TT
1-2
3-4
35,5 33,8 27,43
3-4
1-2
OPFP
DT = 0,50
34,29
35,5 mm
[1.40 in]
33,8 mm ±0,7 mm
[1.33 in ±0.03 in]
1,70 mm
[0.067 in]
6,40 mm
[0.252 in]
0,50 mm
[0.02 in]
35,5 mm
[1.40 in]
33,8 mm ±0,7 mm
[1.33 in ±0.03 in]
1,70 mm
[0.067 in]
6,40 mm
[0.252 in]
0,50 mm
[0.02 in]
Gold-plated contacts,
low-energy loads
35,5 mm
[1.40 in]
33,8 mm ±0,7 mm
[1.33 in ±0.03 in]
1,70 mm
[0.067 in]
6,40 mm
[0.252 in]
0,50 mm
[0.02 in
High temperature,
150 °C [302 °F]
Bar Chart1
Free
Position
(nom.)
Operate Point
Pretravel
(max.)
Overtravel
(min.)
Differen-
tial Travel
(max.)
Notes
TT
1-2
3-4
45,7 44,0 38,35
3-4
1-2
OPFP
DT = 0,51
44,46
45,7 mm
[1.80 in]
44,0 mm ±0,7 mm
[1.73 in ±0.03 in]
1,70 mm
[0.067 in]
5,56 mm
[0.219 in]
0,50 mm
[0.02 in]
45,7 mm
[1.80 in]
44,0 mm ±0,7 mm
[1.73 in ±0.03 in]
1,70 mm
[0.067 in]
5,56 mm
[0.219 in]
0,50 mm
[0.02 in]
Gold-plated contacts,
low-energy loads
45,7 mm
[1.80 in]
44,0 mm ±0,7 mm
[1.73 in ±0.03 in]
1,70 mm
[0.067 in]
5,56 mm
[0.219 in]
0,50 mm
[0.02 in]
High temperature,
150 °C [302 °F]
18. 18 sensing.honeywell.com
LS Series
Table 19. Side Plunger
Compact
20 mm
conduit
Compact
PG 13,5
conduit
Plug-in less
base*
Description
Electrical
Rating
(Table 2)
Operating
Torque or
Force
4LS1-4C 4LS1-4PG 204LS1-4 Side pin plunger (SST) J
40,1 N
[9.01 lb]
3LS1-4C 3LS1-4PG 203LS1-4 Side roller plunger (SST) J
40,1 N
[9.01 lb]
1
Contact closed n; Contact open o. NOTE: Bar chart measurements are in millimeters.
* Requires an 18PA1-4C Terminal Block (20 mm conduit threads) or 18PA1-4PG Terminal Block (PG13,5 conduit threads) ordered separately. Terminal block is base receptacle.
Table 20. Wobble, Coil Spring
Compact
20 mm
conduit
Compact
PG 13,5
conduit
Plug-in less
base*
Description
Electrical
Rating
(Table 2)
8LS1-4C 8LS1-4PG 208LS1-4
Wobble, random motion 141 mm [5.55 in]
stranded steel cable
J
8LS3-4C 8LS3-4PG 208LS3-4
Wobble actuated, random motion 141 mm [5.55 in]
aluminum rod
J
8LS125-4C 8LS125-4PG 208LS125-4
Wobble actuated, random motion 191 mm [7.53 in]
stainless steel cat whisker
J
8LS152-4C 8LS152-4PG 208LS152-4
Wobble actuated, random motion 141 mm [5.55 in]
stainless steel coil spring
J
1
Contact closed n; Contact open o. NOTE: Bar chart measurements are in millimeters.
*Requires an 18PA1 Terminal Block (base receptacle) which must be ordered separately. 18PA1 terminal block has 0.5-14 NPT conduit threads.
2
Operating position in any direction except pull.
MICRO SWITCH™ LS SERIES ORDER GUIDE/RECOMMENDED LISTINGS (FOR EMEA/EUROPE)
For listings not shown, contact your Honeywell representative.
19. 19sensing.honeywell.com
MICRO SWITCH™ General Purpose Limit Switches O.T. • Operating torque
O.F. • Operating force
R.P. • Release point
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
Bar Chart1
Free
Position
(nom.)
Operate Point
Pretravel
(max.)
Overtravel
(min.)
Differen-
tial Travel
(max.)
Notes
TT
1-2
3-4
57,27 54,5 48,94
3-4
1-2
OPFP
DT = 1,0
55,5
57,27 mm
54,5 mm ±1,2 mm
[2.15 in ±0.047 in]
2,77 mm
[0.109 in]
5,56 mm
[0.219 in]
1,0 mm
[0.039 in]
–
TT
1-2
3-4
70,37 67,6 62,04
3-4
1-2
OPFP
DT = 1,0
68,6
70,37 mm
67,6 mm ±1,2 mm
[2.66 in ±0.047 in]
2,77 mm
[0.109 in]
5,56 mm
[0.219 in]
1,0 mm
[0.039 in]
Roller plunger may be locked in a
position through 360°
Operating Torque or
Force
Bar Chart1
Operate Point2
Pretravel
(max.)
Overtravel
(min.)
Differen-
tial Travel
(max.)
Notes
1,39 N [5.0 oz]
TT
1-2
3-4
0 28,6
59,3
3-4
1-2
OPFP
(nom.)
RP
28,6 mm
[1.125 in]
28,6 mm
[1.125 in]
30,7 mm
[1.21 in]
– –
1,39 N [5.0 oz]
28,6 mm
[1.125 in]
28,6 mm
[1.125 in]
30,7 mm
[1.21 in]
– –
0,28 N [1.0 oz] TT
1-2
3-4
0 63,5
127
3-4
1-2
OPFP
(nom.)
RP
63,5 mm
[2.5 in]
63,5 mm
[2.5 in]
63,5 mm
[2.5 in]
– –
1,39 N [5.0 oz] TT
1-2
3-4
0 28,6
59,3
3-4
1-2
OPFP
(nom.)
RP
28,6 mm
[1.125 in]
28,6 mm
[1.125 in]
30,7 mm
[1.21 in]
– –
20. 20 sensing.honeywell.com
LS Series
Table 21. Terminal Block, Base Receptacle
Plug-in less
base*
Description
18PA1 Terminal block (base receptacle) with 0.5-14 NPT conduit thread. For use with 200LS Series
18PA1-4C Terminal block (base receptacle) with 20 mm conduit threads. For use with 200LS-4 Series
18PA1-4PG Terminal block (base receptacle) with PG13,5 conduit threads. For use with 200LS-4 Series
Table 22. Replacement Levers for Side Rotary Switches
Catalog Listing
(North America)
Catalot Listing
(EMEA/Europe)
Description
LSZ51D 6PA78-4 Replacement lever for most 1LS switches with fixed length 38,1 mm lever with Ø19 mm steel roller
LSZ52C 6PA44-4 Replacement lever for most 1LS switches w adj. length 38 mm to 90 mm lever with Ø19 mm nylon roller
LSZ54M 6PA43-4 Replacement aluminum rod lever for most 1LS switches w adj. rod with max. length 140 mm
6PA80 6PA80-4 Replacement fork lever for 6LS switches w steel rollers on opposite side
6PA102 6PA102-4 Replacement fork lever for 6LS switches w nylon rollers on same side
6PA82 Fork lever for 6LS switches w steel rollers on same side
LSZ52D Adjustable length lever 38 mm to 90 mm w Ø19 mm steel roller
LSZ52J Adjustable length lever 38 mm to 90 mm w Ø25,4 mm nylon roller
LSZ52K Adjustable length lever 38 mm to 90 mm w Ø38,1 mm nylon roller
LSZ52M Adjustable length lever 38 mm to 90 mm w Ø50,8 mm rubber roller
LSZ52Y Adjustable length lever 38 mm to 90 mm w Ø50,8 mm nylon roller
6PA71 Fixed length lever, 38,1 mm length w Ø19 mm nylon roller
6PA121 Fixed length lever, 38,1 mm length w Ø19 mm steel roller
LSZ51L Fixed length lever, 38,1 mm length w Ø19 mm ball bearing steel roller
6PA144 Fixed length lever, 38,1 mm length w Ø19 mm ball bearing steel roller
6PA63 Adjustable stainless steel rod lever, 330 mm max. length
6PA69 Adjustable stainless steel spring rod lever, 127 mm to 190 mm
6PA57 Manually operated Ø38,1mm aluminum button on a 68,1 mm metal lever
21. 21sensing.honeywell.com
MICRO SWITCH™ General Purpose Limit Switches
Table 23. Replacement Parts (North America Products)
Contact
Block
Contact
Block
Catalog
Listing
Compact Plug-in
Operating
Head
Actuator/
Lever
1LS1-L 2MN1-L – 9PA15 LSZ51D
1LS1
201LS1
2MN1 2MN6 9PA15 LSZ51D
1LS2-L 2MN1-L – 9PA16* Note 1
1LS2
201LS2
2MN1 2MN6 9PA16* Note 1
1LS3-L 2MN1-L – – –
1LS3
201LS3
2MN1 2MN6 9PA16* LSZ52C
1LS6
201LS6
2MN1 2MN6 – LSZ51D
1LS9
201LS9
2MN8 2MN13 9PA16* Note 1
1LS10-L 2MN1-L – – LSZ54M
1LS10
201LS10
2MN1 2MN6 – LSZ54M
1LS19
201LS19
2MN8 2MN13 9PA15 LSZ51D
1LS23
201LS23
2MN1 2MN6 9PA68* Note 2
1LS47
201LS47
2MN8 2MN13 – LSZ54M
1LS53
201LS51
2MN8 2MN13 – LSZ54M
1LS56
201LS56
2MN8 2MN13 9PA74* Note 2
1LS58 2MN8 – 9PA16* LSZ52C
1LS59 2MN8 – 9PA74* LSZ52C
1LS131 2MN8 – 9PA74* 6PA121
1LS501
201LS501
2MN1 2MN14 9PA15 LSZ51D
* Furnished without actuator
¹ Any auxiliary lever listed can be used
² LSZ54M, 6PA63, 6PA71 or 6PA121 levers only recommended for
these catalog listings
Table 24. Replacement Parts (North America Products)
Contact
Block
Contact
Block
Catalog
Listing
Compact Plug-in
Operating
Head
Actuator/
Lever
2LS1-L 2MN1-L – 9PA32 Included w
operating
head
2LS1
201LS1
2MN1 2MN6 9PA32
2LS111
201LS111
2MN3 2MN7 – –
3LS1
203LS1
2MN11 2MN9 9PA45
Included w
operating
head
4LS1
204LS1
2MN11 2MN9 9PA44
5LS1-L 2MN1-L – 9PA33
5LS1
205LS1
2MN1 2MN6 9PA33
6LS1
206LS1
2MN1 2MN6 9PA47* 6PA80
6LS2-L 2MN1-L – 9PA47* Note 3
6LS2
206LS2
2MN1 2MN6 9PA47* Note 3
6LS3 2MN1 – 9PA47* 6PA102
7LS1 2MN1 – 9PA15 LSZ51D
8LS1-L 2MN11-L – 9PA58
Included w
operating
head
8LS1
208LS1
2MN11 2MN9 9PA58
8LS3
208LS3
2MN1 2MN6 9PA49
8LS125
208LS125
2MN11 2MN9 9PA54
8LS152
208LS152
2MN1 2MN6 9PA42
* Furnished without actuator
3
Fork lever actuators recommended for two position side rotary main-
tained
22. 22 sensing.honeywell.com
LS Series
Table 25. Replacement Parts (European Products)
Contact
Block
Catalog
Listing
LS
Catalog
Listing
200 LS
Basic
Switch
(com-
pact
only)
Operating
Head
Actuator/
Lever
1LS1-4C 201LS1-4 2MN1-M 9PA15-4 6PA78-4
1LS2-4C 201LS2-4 2MN1-M 9PA16-4 –
1LS3-4C 201LS3-4 2MN1-M 9PA16-4 6PA44-4
1LS10-4C 201LS10-4 2MN1-M 9PA40-4 6PA43-4
1LS19-4C 201LS19-4 – 9PA15-4 6PA78-4
1LS23-4C – 2MN1-M – –
1LS47-4C – – 9PA40-4 6PA43-4
1LS56-4C 201LS56-4 – 9PA74- *
1LS243-4C – – 914PA15 6PA78-4
1LS244-4C – – 914PA15 6PA78-4
2LS1-4C 202LS1-4 2MN1-M 9PA32-4 Included
with
operating
head
3LS1-4C 203LS1-4 – 9PA45-4
4LS1-4C 204LS1-4 – 9PA44-4
5LS1-4C 205LS1-4 2MN1-M 9PA33-4
6LS1-4C 206LS1-4 2MN1-M 9PA46-4 6PA80-4
6LS2-4C 206LS2-4 2MN1-M 9PA47-4 –
6LS3-4C – 2MN1-M 9PA47-4 6PA102-4
8LS1-4C 208LS1-4 2MN1-M 9PA58-4 Included
with
operating
head
8LS3-4C 208LS3-4 2MN1-M 9PA49-4
8LS125-4C 208LS125-4 2MN1-M 9PA54-4
8LS152-4C 208LS152-4 2MN1-M 9PA42-4
Note: Operating head includes lever where appropriate and internal
plunger.
* Because of low operating force, 6PA43-4, 6PA71-4, or 6PA78-4 auxil-
iary actuators only are recommended for these listings.