2. Tooling Set Includes :
 H8.811 - Clamping Block: List Price: $2,260
 H5.50.66/2 –Surface Finder with Ball 2mm List Price: $1,160
 H5.50.8 – Aligning Rule List Price: $1,060
 H5.50.9 – Aligning Gauge List Price: $1,080
 H5.51.11 – Minifix Pallet (set of 30) List Price: $ 300
 H5.51.15 – Minifx F Holder List Price: $ 460
 H5.51.16 – Minifix V Holder List Price: $ 460
 H5.50 – x 2 E Pallet (50 sq.) List Price: $ 280
 H8.11.10 – Pneumatic Tool Clamper List Price: $4,260
 H5.51.1 x 2– Minifix Stainless Pallet Holder List Price: $ 820
 H5.62.25 x 2 – Magazine Fork List Price: $ 410
---------------------------------------------------------------------------------------------
Total List Price :$14,060
40% Package Deal Discount - $5,624
---------------------------------------------------------------------------------------------
Total Selling Price: $8,436

3. H 5.50.8 -Test Bar
For aligning and checking the axis and radial position of the mounted
tool clampers, and for concentricity and system checks

4. H 5.50.9 Aligning Gauge
For aligning and checking the tool and pallet clampers in the X/Y – direction,
and for checking the quill/pallet clamper in the center direction.

5. H5.51.11 Minifix Pallet (Set of 30-Rust Proof)
Aluminum, x 20 mm (0.787”), with reference point, for electrodes of copper and graphite.
For attachment on the electrode blank by single-package system (glue), e.g. H 50 K. A
fastening thread M 6 with a length of approx. 12 mm (0.472”) is drilled into the electrode through
the central hole. The pallet glued to the electrode is fastened
to the holder precisely and frictionally by means of the central
screw, under consideration of the reference points.
Transmission of the current by the central screw

6. H 5.51.1 Minifix Stainless Pallet Holder - Short
r precise and angular fixing of the MINIFIX and MINIFIXplus electrodes, pallets and holder
dexing in precision-ground centering Vee blocks. With internal flushing and external flushin
The central draw spindle has a continuous flushing hole. Repetitive accuracy of the pallet
same holder) l 0.005 mm (0.0002”) Changing accuracy (holder-holder) ± 0.005 mm (0.0002”
Same length for all holders ± 0.005 mm (0.0002”)

7. H 5.50.66/2 Ball-type Surface Finder
For determining the position of the work piece.
125 mm (4.920”) long, with hardened steel ball,
diameter 2+0.0 – 0.0/02 - 05 mm (0.078”).

8. H 5.50 Pallet
For copper electrodes up to x l 75 mm (2.952”)
for graphite electrodes up to x l 100 mm (3.937”),
milled on H 8.811. Inductively hardened centering Vee blocks and Z-supports.
Internal flushing through the clamping journal and external flushing connection.
Weight 0.5 kg (1.1 lbs)
The pallet is supplied without clamping journal.

9. H 5.51.15 F-Holder
tainless steel, nitrided with reference point. For fixturing of small flat electrodes as e.g. sma
sheet metal or rod electrodes up to 5 x 12 mm (0.196” x 0.472”).
H 5.51.16 V-Holder
Stainless steel, nitrided with reference point. For fixturing of
small electrodes up to x l10 mm (0.393”).

10. H 8.11.10 Tool Clamper (without MINIFIXplus)
Compressed air and dielectric are supplied from above.The rear of the clamper is ground as an
alignment surface parallel to the centering Vee block
Positioning and repetitive accuracy 0.002 mm (0.00008”) / Clamping force (clamper without
MINIFIXplus) 2500 N
Clamping force (clamper with MINIFIXplus) 1500 N / Permissible electrode weight 100 kg (220.5
lbs)

11. Magazine Fork

12. H 8.811 Pallet Clamper
With four precision-ground contact surfaces, also used for the alignment on the
machine (the dimension from the center to the contact surface is engraved). Positive
clamping.
Positioning accuracy 0.002 mm (0.00008”)