Inverter

1. D700 Series VFD Presentation
D700 Series Micro Inverter
High Performance and Reliability
High Performance and Reliability
at an Economical Price
at an Economical Price

2. D700 Series VFD Presentation
• North & South American release November 1st
, 2008
• Replaces S500E Series
• New models: 7.5HP & 10HP for 240V & 480V
– 480V 3Ø Input/Output
• 1/2HP to 10HP
– 240V 3Ø Input/Output
• 1/8HP to 10HP
– 240V 1Ø Input / 240V 3Ø Output
• 1/8HP to 3HP
– 120V 1Ø Input / 240V 3Ø Output
• 1/8HP to 1HP
D700 Series Micro Inverter

3. D700 Series VFD Presentation
D700 Series Micro Inverter
Safety Stop input
Embedded LED display
M-dial for easy parameter
configuration & speed command
Mode status indicators
RJ45 Connector (RS485 serial port)
• Mitsubishi VFD protocol and
Modbus RTU protocol
• Panel mount keypad/display
• Setup software
• Human Machine Interface
• Battery powered keypad (future)
External brake resistor
Connection (FR-ABR-**K)
Push button control & access
Selectable 0~10V or 4~20mA
analog input switch
0~10V analog output
Sink/Source selectable I/O
Same mounting holes as S500E
Spring clamp terminals
for control wiring

4. D700 Series VFD Presentation
D700 – Features & Functions
• Safety stop function
EN954-1 Category 3
IEC60204-1 Stop Category 0
D700 complies with the following safety
standards.
CPU IM
S1
S2
D700
Safety
Switches
Cutoff path 1
Cutoff path 2
SD
SD
SF1
SF2
(Approved by TUV)
IGBTs
Gate drivers

5. D700 Series VFD Presentation
D700 – Features & Functions
• Password function
-Reading and writing parameters are locked by setting
a password (four digit figures)
-Selectable 6 levels
① Read possible, write protected (all)
② Read possible, write protected (by PU)
③ Read possible, write protected (by net)
④ Read and write protected (all)
⑤ Read and write protected (by PU)
⑥ Read and write protected (by net)
※If you forget the password, you can release the password
lock by Pr All clear.

6. D700 Series VFD Presentation
D700 – Features & Functions
Best performance
High torque with flux vector control
Flux vector control with automatic tuning.
High torque, same as E500
-150% at 1Hz / 200% at 3Hz
Automatic tuning
-R1 tuning
Torque
Speed
(rpm)

7. D700 Series VFD Presentation
D700 – Features & Functions
High reliability
Long life components, life time diagnostics and
easy maintenance.
Long life components
Life time diagnosis and breakdown detection.
Easy maintenance
Electrolytic aluminum capacitors and cooling fans
are designed for 10 year life-time.
Easy to change the cooling fan,
because of being located on
the top of drives,
Life diagnosis function for main capacitor,
monitoring rotation speed of cooling fan and
monitoring temperature of In-rush current
suppression resistor.

8. D700 Series VFD Presentation
D700 – Features & Functions
High reliability
Screw less terminal (control signal terminals)
No more re-tightening of screws
(ex. Automotive manufacturing line)
No loosing connection due to vibration
(ex. Railway interior wiring)
No wiring tool and eliminates human error
( direct plug-in )
maintenance
free
high
reliability
Quickly
setting

9. D700 Series VFD Presentation
D700 – Features & Functions
Built-in Brake Chopper circuit in 1/2HP and above allow
connection of external brake resistor. Useful for reducing
deceleration time on machines with large inertias such as a
fan or lifting applications that have overhauling loads.

10. D700 Series VFD Presentation
D700 – Features & Functions
Regeneration avoidance function automatically increases
output frequency on applications where overhauling loads or
external factors cause motor regeneration. Possibly negating
the necessity of an external brake option.

11. D700 Series VFD Presentation
D700 – Features & Functions
Optimum excitation control automatically improves motor
efficiency when the motor is lightly loaded meaning increased
energy savings for fan and pump applications.

12. D700 Series VFD Presentation
D700 – Features & Functions
Dancer control function allows PID to control tension based on
dancer feedback.

13. D700 Series VFD Presentation
D700 – Features & Functions
Power failure deceleration to a stop function allows the motor to
be automatically controlled to a stop when power is interrupted
or a “brown out” has occurred.

14. D700 Series VFD Presentation
• Others
– Modbus RTU communications via the RJ45 allow easy
communications with third party master controllers
– Frequency search function allows the inverter to catch a
spinning load
– Remote I/O allows the serial network master to monitor
the D700’s digital inputs and control the digital and relay
outputs
– Automatic carrier frequency switchover adjusts the carrier
frequency based on motor load, allowing quite operation
under idle conditions
D700 – Features & Functions

15. D700 Series VFD Presentation
• VFD Micro Demo
– Demo includes D700 and E700 Series Micro Inverters
– Designed to be used with VFD-MOTOR-DEMO
D700 – Sales Tools

16. D700 Series VFD Presentation
D700 Brochure
• Global Catalog
– Much more technical and global information

17. D700 Series VFD Presentation
D700 - Pocket Reference Guide

18. D700 Series VFD Presentation
• D700 & E700 Video CD
• D700 Mini Screw Driver
• D700 Poster
D700 – Promotional Items

19. D700 Series VFD Presentation