Deburring is the process of smoothing the rough edges or ridges on a machined part.
At George Braswell's Command Tech deburring is done on aluminum, steel, plastics and other materials. There is a certain finesse that a good deburrer acquires.
4. Materials
At Command Tech deburring is done on
aluminum, steel, plastics and other materials.
Deburring can also be done on additional types
of metals, wood, cardboard and more materials
for other uses.
Any piece or part that is made by machining can
benefit from deburring.
5. Examples
If you have ever nicked yourself when drinking
from a plastic cup that had a rough edge, felt a
rough edge on a toy or felt the rough edge of a
freshly clipped fingernail you can understand
why sharp edges and ridges should be removed.
Sharp edges on a machined part cause the same
effect.
6. Dangers
Additionally these pieces have the potential to
fall off when the part is in use.
When critical machined parts are in use these
sharp pieces can fall off and short out
electronics that control aircraft, helicopters or
missiles if not removed.
7. Deburring Department
The deburring department use files, sharpened
files, deburring tools, sand paper, Dremel tools,
and tumbling.
Some deburring can be done on the CNC
machines.
8. Deburring Department Employees
Employees must be properly trained to handle
sharp parts in order to avoid injury while
deburring.
They must learn the difference between
deburring properly and destroying a part.
Improper deburring leads to parts that must be
scrapped and can not be sold which is very
costly for the company.
9. Specs
All manufacturing parts have a specific finish
call out on the blueprints.
Deburring must be able to debur a part without
damaging the finish on the part.
There is a certain finesse that a good deburrer
acquires.