Geodesic dome with bamboo and lashings
•
5 likes•7,901 views
This document describes how to construct a geodesic dome using bamboo and lashings. The dome is made from 10 hexagonal frames and 5 half-hexagonal frames that are combined into a simple structure. A diagram shows the dome structure with blue faces for full hexagons and purple faces for half hexagons.
Report
Share
Report
Share
Recommended
HEAT TRANSFER THROUGH FENESTRATION SYSTEM (M.TECH THESIS)-2015
In India 35% of total energy being consumed for buildings and it is growing 8% annually. The growing energy demand for buildings leads from traditional biomass to commercial fuels, this results in increasing carbon emissions and aggravates power shortages in India. Fenestration system are the largest elements for energy loss in buildings. Accurate and exact evaluation of transfer performance is critical in determining overall use of energy in building. Hence, two dimensional (2-D) heat transfer analysis transfer can be used to determine thermal performance
as three dimensional (3-D) may be complex one as compared to 2-D. All two dimensional results can be analyzed using WINDOW and THERM software while, practical experiment can be analyzed using hot box method but it is too expensive for each product. Results were obtained for broad range of products in market with frame materials, spacers, insulated glass units (IGU). All 2-D results were obtained with THERM6/WINDOW6. All three modes of heat transfer mechanism were incorporated in heat transfer modeling. For energy transfer we have to determine U factor i.e. heat transfer coefficient which tells about heat transfer Results shows that different material had great impact on the performance of heat transfer while, the
spacer systems did not have much impact on the 2-D results as it only focus on reducing moisture content of building fenestration and prevent from mold development. It can be concluded that if we concentrate on different material and varies boundary conditions we get different results which can be great help in reducing global warming and heat transfer that is contrast reducing energy loss
WINDOWS.pdf
The document discusses windows, including their history, components, styles, classifications, and materials. Some key points:
- Windows originated as openings but now usually include glass or plastic. They allow light and air into buildings.
- Early windows had small openings that were later filled with materials like stone, wood, glass or paper. Modern windows are usually large glass rectangles.
- Windows can be classified by their use, forms/shapes, and operational system. Common types include casement, double-hung sash, bay, and fixed windows.
- Materials used in glazing have advanced from single to double or triple glazing using gases like argon between panes for improved insulation. New technologies also
Wall finishes
Wall finishes provide decorative coverings for walls that conceal structural elements and enhance the interior or exterior appearance of a building. They come in various materials like wood, stone, tiles, gypsum boards and more. Good wall finishes are durable, straight, and can take paints or wallpaper easily. The type of wall finish used depends on factors like the rooms' functions and resistance to damage from water or fire.
Climatic zones of india
The document discusses building design considerations for warm and humid climates. Warm and humid climates are characterized by high relative humidity between 70-90%, temperatures between 25-35°C in summer and 20-30°C in winter, and around 1200mm of annual precipitation. Passive dessicant cooling systems are recommended, which remove moisture from air by passing it through a desiccant material. This decreases humidity and the desiccant is then regenerated using solar heat. Building design should also focus on reducing heat gain through shading, maximizing cross ventilation to promote heat loss, and dissipating humidity to improve comfort.
Gold Coast Convention & Exhibition Centre
The document suggests using Halls 1 and 2 as the space for a Family Fun Day event. It also lists other rooms at the venue, such as Meeting Rooms 5-8, Foyer F, Central Rooms, Arena 2 for a Charity Ball, Halls 2 and 3 for a Gala Dinner, and Hall 1 for a car launch event. Several photos show past events that were held in Halls 1 and 2, including a winter wonderland theme that attracted 1,200 guests.
Client Brief OF INTERIOR DESIGNER
Farooq is a 30-year-old engineer who lives in an apartment in the city and is looking to furnish his contemporary home in an Art Deco style. He works occasionally from home and needs living/dining rooms, a separate kitchen, and a bedroom with bath, with warm and cool colors and fabrics including silk and cotton to suit his hobbies of using the computer and internet as well as entertaining formal dinners and displaying his book collection.
Green Walls Technology: Benefits and Design
Green Walls Technology: Benefits and Design
`
For more information, Please see websites below:
`
Organic Edible Schoolyards & Gardening with Children =
http://scribd.com/doc/239851214 ~
`
Double Food Production from your School Garden with Organic Tech =
http://scribd.com/doc/239851079 ~
`
Free School Gardening Art Posters =
http://scribd.com/doc/239851159 ~
`
Increase Food Production with Companion Planting in your School Garden =
http://scribd.com/doc/239851159 ~
`
Healthy Foods Dramatically Improves Student Academic Success =
http://scribd.com/doc/239851348 ~
`
City Chickens for your Organic School Garden =
http://scribd.com/doc/239850440 ~
`
Simple Square Foot Gardening for Schools - Teacher Guide =
http://scribd.com/doc/239851110 ~
A presentation on green roofs and green walls
A total idea of Green Roof and Green Walls construction and the different types of plants we can grow.
Recommended
HEAT TRANSFER THROUGH FENESTRATION SYSTEM (M.TECH THESIS)-2015
In India 35% of total energy being consumed for buildings and it is growing 8% annually. The growing energy demand for buildings leads from traditional biomass to commercial fuels, this results in increasing carbon emissions and aggravates power shortages in India. Fenestration system are the largest elements for energy loss in buildings. Accurate and exact evaluation of transfer performance is critical in determining overall use of energy in building. Hence, two dimensional (2-D) heat transfer analysis transfer can be used to determine thermal performance
as three dimensional (3-D) may be complex one as compared to 2-D. All two dimensional results can be analyzed using WINDOW and THERM software while, practical experiment can be analyzed using hot box method but it is too expensive for each product. Results were obtained for broad range of products in market with frame materials, spacers, insulated glass units (IGU). All 2-D results were obtained with THERM6/WINDOW6. All three modes of heat transfer mechanism were incorporated in heat transfer modeling. For energy transfer we have to determine U factor i.e. heat transfer coefficient which tells about heat transfer Results shows that different material had great impact on the performance of heat transfer while, the
spacer systems did not have much impact on the 2-D results as it only focus on reducing moisture content of building fenestration and prevent from mold development. It can be concluded that if we concentrate on different material and varies boundary conditions we get different results which can be great help in reducing global warming and heat transfer that is contrast reducing energy loss
WINDOWS.pdf
The document discusses windows, including their history, components, styles, classifications, and materials. Some key points:
- Windows originated as openings but now usually include glass or plastic. They allow light and air into buildings.
- Early windows had small openings that were later filled with materials like stone, wood, glass or paper. Modern windows are usually large glass rectangles.
- Windows can be classified by their use, forms/shapes, and operational system. Common types include casement, double-hung sash, bay, and fixed windows.
- Materials used in glazing have advanced from single to double or triple glazing using gases like argon between panes for improved insulation. New technologies also
Wall finishes
Wall finishes provide decorative coverings for walls that conceal structural elements and enhance the interior or exterior appearance of a building. They come in various materials like wood, stone, tiles, gypsum boards and more. Good wall finishes are durable, straight, and can take paints or wallpaper easily. The type of wall finish used depends on factors like the rooms' functions and resistance to damage from water or fire.
Climatic zones of india
The document discusses building design considerations for warm and humid climates. Warm and humid climates are characterized by high relative humidity between 70-90%, temperatures between 25-35°C in summer and 20-30°C in winter, and around 1200mm of annual precipitation. Passive dessicant cooling systems are recommended, which remove moisture from air by passing it through a desiccant material. This decreases humidity and the desiccant is then regenerated using solar heat. Building design should also focus on reducing heat gain through shading, maximizing cross ventilation to promote heat loss, and dissipating humidity to improve comfort.
Gold Coast Convention & Exhibition Centre
The document suggests using Halls 1 and 2 as the space for a Family Fun Day event. It also lists other rooms at the venue, such as Meeting Rooms 5-8, Foyer F, Central Rooms, Arena 2 for a Charity Ball, Halls 2 and 3 for a Gala Dinner, and Hall 1 for a car launch event. Several photos show past events that were held in Halls 1 and 2, including a winter wonderland theme that attracted 1,200 guests.
Client Brief OF INTERIOR DESIGNER
Farooq is a 30-year-old engineer who lives in an apartment in the city and is looking to furnish his contemporary home in an Art Deco style. He works occasionally from home and needs living/dining rooms, a separate kitchen, and a bedroom with bath, with warm and cool colors and fabrics including silk and cotton to suit his hobbies of using the computer and internet as well as entertaining formal dinners and displaying his book collection.
Green Walls Technology: Benefits and Design
Green Walls Technology: Benefits and Design
`
For more information, Please see websites below:
`
Organic Edible Schoolyards & Gardening with Children =
http://scribd.com/doc/239851214 ~
`
Double Food Production from your School Garden with Organic Tech =
http://scribd.com/doc/239851079 ~
`
Free School Gardening Art Posters =
http://scribd.com/doc/239851159 ~
`
Increase Food Production with Companion Planting in your School Garden =
http://scribd.com/doc/239851159 ~
`
Healthy Foods Dramatically Improves Student Academic Success =
http://scribd.com/doc/239851348 ~
`
City Chickens for your Organic School Garden =
http://scribd.com/doc/239850440 ~
`
Simple Square Foot Gardening for Schools - Teacher Guide =
http://scribd.com/doc/239851110 ~
A presentation on green roofs and green walls
A total idea of Green Roof and Green Walls construction and the different types of plants we can grow.
GreenStudio - Chapter 4 2 3 Toplighting
Top lighting is a daylighting strategy that uses openings located at the roof plane to admit surrounding daylight into buildings. There are different types of top lighting such as skylights, clerestories, sawtooth lighting, light scoops, and roof monitors. Top lighting allows for greater design flexibility, adds depth to lighting, and is easily coordinated with electric lighting systems. However, direct sunlight can cause visual discomfort and top lighting does not provide views to the outside like side lighting. When designing top lighting, the appropriate type must be selected based on building orientation, sky conditions, and target daylight factors.
Shanghai Tower.pdf
The report talks about the tower, its make and architectural advancements that make this building world famous.
Sun Shading Devices
Presentation on uses, types, importance and examples of sun shading devices. Presented by Students of Bachelors of Architecture at Kathmandu Engineering College in Building Science I class . Course Lecturer: Ar. Pranita Sharma Pandey
Designing for the Visually Impaired
This document discusses designing assistive technologies for the visually impaired. It proposes a digital impression board and haptic pen that work together to allow users to feel textures and routes on a map. The digital board would use magnets to change textures under the pen tip, while the pen contains buttons, a microphone and vibration to provide feedback. It also suggests expanding these ideas to develop an assistive jacket with integrated GPS and texture detection to guide navigation without maps. The goal is to mirror human abilities and transfer tasks to natural actions through biomimicry and intuitive, memorable interfaces.
Designing with plants
This document discusses considerations for designing with plants in landscape and site planning. It covers plant classifications, design considerations, plant materials, and functional aspects of planting design. Key points include:
- Plants are an important component of landscape design and different plant types serve different functions. Successful planting design requires knowledge of ecology, botany, aesthetics, and environmental functions.
- Choosing appropriate plant materials depends on their physical characteristics, growth requirements, and the context/site where they will be used. Factors like climate, soil, water needs, sunlight, and maintenance requirements must align between plants and their planned location.
- Plant forms, foliage, flowering, and other traits impact the aesthetic and functional roles of different
Modern styles
The document provides an overview of 10 popular interior design styles: Modern, Contemporary, Minimalist, Mid-Century Modern, Industrial, Bohemian, Rustic, Hollywood Glam, Coastal, and Victorian. Each style is described in 1-2 paragraphs highlighting its defining characteristics, popular elements, and types of homes it works well in. The styles range from sleek and minimalist to ornate and dramatic.
Passive cooling-techniques
Passive cooling techniques are least expensive means of cooling a home which maximizes the efficiency of the building envelope without mechanical devices.
For more information on energy conversation concepts and green architecture, follow us at - www.archistudent.net
Streetcars in Portland, Maine
Streetcars in Portland, Maine is a presentation created by David A. Marshall. The slideshow as first presented in September 2012 at the event, "Green Evolution: Streetcars in the 21st Century in Maine" at the Maine Irish Heritage Center. Marshall a City Councilor in Portland, Maine and the Chair of the Transportation, Sustainability, and Energy
Cork Case Study pdf
Cork is a sustainable material that is harvested from cork oak trees without killing the trees. Cork trees can be harvested every 9-12 years and each tree can be harvested up to 16 times over its 170-250 year lifespan. Cork has properties that make it suitable for flooring, including thermal insulation, impermeability, resilience, slip resistance, and design flexibility. Cork flooring is comfortable, durable, natural, and easy to maintain while providing environmental benefits.
Tiles and pavers outdoors
This document provides an overview of tiles and pavers used outdoors. It discusses the manufacturing process for concrete pavers including raw materials and basic production steps. It also describes different types of tiles and pavers categorized by material (e.g. concrete, brick), shape (e.g. interlocking, non-interlocking), and application in areas like walkways, driveways, and patios. Advantages and disadvantages of various tile and paver materials are mentioned.
Waterproofing
The document discusses different types of waterproofing for buildings. It describes below grade waterproofing systems like cementitious coatings and liquid applied membranes. It also covers above grade waterproofing and roof waterproofing systems. Specific products are mentioned for different applications along with their properties and coverage rates. Key steps in the waterproofing application process include surface preparation through cleaning and repair, followed by installation of the waterproofing and providing protection.
Green Walls Technology: Benefits and Design
This document provides an introduction to green walls, also known as vertical gardens. It discusses the history and evolution of green wall technology. Green walls are divided into two categories: green facades, which use climbing plants on supporting structures, and living walls, which use pre-vegetated modular panels. The document outlines the environmental, social, and economic benefits of green walls, as well as factors for successful design and maintenance. It concludes by presenting several case studies of innovative green wall installations.
Low cost construction
1. The document summarizes various low-cost construction techniques for building housing, including using natural materials like stone, mud bricks, compressed earth blocks, and bamboo.
2. It describes construction methods like rat-trap bond, corbel arches, and filler slabs that reduce costs compared to standard practices.
3. The document provides details on over 15 different low-cost materials and building techniques that can be used to help provide quality, affordable housing.
Sustainable Architecture PPT
This powerpoint was prepared by Kris Wilson of DesignHomes NZ, for his talk to the students of Room 18, FFIS, Hamilton, NZ.
Milli Jain- School Furniture (Chair Design)
This Project Report On School Furniture Has Been Created, Developed And Designed By Me, During My Study Of Product Designing, Confirming To NSQF Level 6 Of NSDC.
In This Project I Have Discussed About Product Design And Amongst Various Products I Have Made An Elaborated Discussion Of Furniture Design, Its Timeline And Various Types. Classification Of Furniture, Functional Requirement Of A Furniture And Its Characteristics Has Also Been Discussed. After Their Study I Have Learned To Make A Furniture Ergonomically Sound. This Made Me Clear The Basic Level And Then I Moved Down On Developing Engineering Design Of Furniture I.E. Specifying The Construction Of Furniture Through Detail Drawings.
I Have Also Discussed About The Various Furniture Joints And Their Application In My Design.
I Request You To Kindly Go Through My Project Pages. As A Novice In This Field I Have Tried My Level Best To Bring Out The Best Of My Knowledge Gained At Dezyne E’cole College.
Turenscape
The document summarizes the Tianjin Qiaoyuan Park project in Tianjin, China. A former shooting range and garbage dump was regenerated into a low-maintenance urban park through landscape design that introduced natural processes. 21 ponds of varying sizes were dug to create diverse habitats and initiate plant adaptation. Native vegetation was allowed to establish, transforming the site into a park that provides stormwater management, soil improvement, and environmental education opportunities for the surrounding community. Within two years, the park achieved its goals and attracts thousands of daily visitors to experience the evolving landscape.
Green Building: Sustainable Architecture | Redlands, CA - McNaughton Architec...
Green Building: Sustainable Architecture | Redlands, CA - McNaughton Architec...McNaughton Architectural Inc.
Green Building: Sustainable Architecture
Environmentally responsible and resource efficient building design. Architecture that minimizes the negative environmental impact of buildings by efficiency in the use of materials and energy. Goal: to effectively reduce the overall impact of the built environment on human health and the natural environment and increase comfort and livability. Consistent with AIA sponsored Architecture Challenge 2030.
McNaughton Architectural Inc. | http://mna-p.com
300 E State St Suite 360, Redlands, CA 92373
(909) 583-1806
Green buildings
This ppt is more useful for Civil Engineering students.
I have prepared this ppt during my college days as a part of semester evaluation . Hope this will help to current civil students for their ppt presentations and in many more activities as a part of their semester assessments.
I have prepared this ppt as per the syllabus concerned in the particular topic of the subject, so one can directly use it just by editing their names.
Report on flooring
The document discusses various types of flooring materials including hard flooring like wood, stone and tile as well as soft flooring like carpet and resilient flooring. It provides details on different material options for flooring like concrete, wood, bamboo, laminate, linoleum and vinyl. It also discusses flooring installation and maintenance considerations as well as factors that influence material selection like cost, durability and moisture levels.
Apartamento na Vila Olimpia - São Paulo
Friends,
advert for sale / rent this apartment of 40m2 at Rua Professor Vahia de Abreu, 63 - Vila Olímpia - São Paulo, SP.
01 bedroom, living room, bathroom, kitchen and laundry area + 1 parking space and superior terrace.
It is equipped with a stove, refrigerator and washing machine. New electrical installations.
Close to the subway and Shopping Ibiraquera, train and Shopping Vila Olímpia (radius of 1 and 1.5 km) and bus line 100m away, on Avenida Santo Amaro.
2km from Ibirapuera Park, access by bike paths in Moema and Avenida Helio Pellegrino (10min by bike).
5 blocks from Anhembi Morumbi and Insper University.
Ideal for those who work or study in the region.
interested, please send me messages.
*
Amigos,
anuncio en venta / alquiler de este apartamento de 40m2 en Rua Professor Vahia de Abreu, 63 - Vila Olímpia - São Paulo, SP.
01 recámara, sala, baño, cocina y área de lavado + 1 estacionamiento y terraza superior.
Está equipado con una estufa, refrigerador y lavadora. Nuevas instalaciones eléctricas.
Cerca del metro y Shopping Ibiraquera, tren y Shopping Vila Olímpia (radio de 1 y 1,5 km) y línea de autobús a 100m, en la Avenida Santo Amaro.
A 2km del Parque Ibirapuera, acceso por carriles bici en Moema y Avenida Helio Pellegrino (10min en bici).
A 5 cuadras de Anhembi Morumbi e Insper University.
Ideal para quienes trabajan o estudian en la región.
interesado, por favor envíeme mensajes.
*
Amigos,
Estamos vendendo/ alugando este apartamento de 40m2 na Rua Professor Vahia de Abreu, 63 - Vila Olímpia - São Paulo, SP.
01 dormitório, sala, banheiro, cozinha e área de serviço + 1 vaga na garagem.
Está equipado com fogão, geladeira e máquina de lavar roupas. Instalações elétricas novas.
Próximo ao metrô e Shopping Ibiraquera, trem e Shopping Vila Olímpia (raio de 1 e 1,5km) e linha de ônibus a 100m, na Avenida Santo Amaro.
2km do parque do Ibirapuera, acesso por ciclofaixas em Moema e Avenida Helio Pellegrino (10min de bike).
5 quarteirões da Universidade Anhembi Morumbi e Insper.
Ideal para quem trabalha ou estuda na região.
interessados por favor me mandem mensagens.
Banhos Suítes
Estilo e combinação de Piso + Pedra:
01)
* Piso Portobello linha Ecollection
http://www.portobello.com.br/linhas/ecollection
(sugestão DECK EUCALIPTO AUTOCLAVADO PÁTINA 60X60 EXT BOLD)
* Pedra - Mármore Branco carrara ou Carrarinha
http://www.santorinimarmores.com.br/marmores/index.html
02)
* Piso Portobello linha Broadway ou Marmi
http://www.portobello.com.br/linhas/broadway
(sugestão LIME)
http://www.portobello.com.br/linhas/marmi-classico
Com filetes em detalhes http://www.portobello.com.br/produtos/atelier/mos-bianco-mix-sl-30X30-pol-1
* Pedra - Marmore Branco Piguês
More Related Content
What's hot
GreenStudio - Chapter 4 2 3 Toplighting
Top lighting is a daylighting strategy that uses openings located at the roof plane to admit surrounding daylight into buildings. There are different types of top lighting such as skylights, clerestories, sawtooth lighting, light scoops, and roof monitors. Top lighting allows for greater design flexibility, adds depth to lighting, and is easily coordinated with electric lighting systems. However, direct sunlight can cause visual discomfort and top lighting does not provide views to the outside like side lighting. When designing top lighting, the appropriate type must be selected based on building orientation, sky conditions, and target daylight factors.
Shanghai Tower.pdf
The report talks about the tower, its make and architectural advancements that make this building world famous.
Sun Shading Devices
Presentation on uses, types, importance and examples of sun shading devices. Presented by Students of Bachelors of Architecture at Kathmandu Engineering College in Building Science I class . Course Lecturer: Ar. Pranita Sharma Pandey
Designing for the Visually Impaired
This document discusses designing assistive technologies for the visually impaired. It proposes a digital impression board and haptic pen that work together to allow users to feel textures and routes on a map. The digital board would use magnets to change textures under the pen tip, while the pen contains buttons, a microphone and vibration to provide feedback. It also suggests expanding these ideas to develop an assistive jacket with integrated GPS and texture detection to guide navigation without maps. The goal is to mirror human abilities and transfer tasks to natural actions through biomimicry and intuitive, memorable interfaces.
Designing with plants
This document discusses considerations for designing with plants in landscape and site planning. It covers plant classifications, design considerations, plant materials, and functional aspects of planting design. Key points include:
- Plants are an important component of landscape design and different plant types serve different functions. Successful planting design requires knowledge of ecology, botany, aesthetics, and environmental functions.
- Choosing appropriate plant materials depends on their physical characteristics, growth requirements, and the context/site where they will be used. Factors like climate, soil, water needs, sunlight, and maintenance requirements must align between plants and their planned location.
- Plant forms, foliage, flowering, and other traits impact the aesthetic and functional roles of different
Modern styles
The document provides an overview of 10 popular interior design styles: Modern, Contemporary, Minimalist, Mid-Century Modern, Industrial, Bohemian, Rustic, Hollywood Glam, Coastal, and Victorian. Each style is described in 1-2 paragraphs highlighting its defining characteristics, popular elements, and types of homes it works well in. The styles range from sleek and minimalist to ornate and dramatic.
Passive cooling-techniques
Passive cooling techniques are least expensive means of cooling a home which maximizes the efficiency of the building envelope without mechanical devices.
For more information on energy conversation concepts and green architecture, follow us at - www.archistudent.net
Streetcars in Portland, Maine
Streetcars in Portland, Maine is a presentation created by David A. Marshall. The slideshow as first presented in September 2012 at the event, "Green Evolution: Streetcars in the 21st Century in Maine" at the Maine Irish Heritage Center. Marshall a City Councilor in Portland, Maine and the Chair of the Transportation, Sustainability, and Energy
Cork Case Study pdf
Cork is a sustainable material that is harvested from cork oak trees without killing the trees. Cork trees can be harvested every 9-12 years and each tree can be harvested up to 16 times over its 170-250 year lifespan. Cork has properties that make it suitable for flooring, including thermal insulation, impermeability, resilience, slip resistance, and design flexibility. Cork flooring is comfortable, durable, natural, and easy to maintain while providing environmental benefits.
Tiles and pavers outdoors
This document provides an overview of tiles and pavers used outdoors. It discusses the manufacturing process for concrete pavers including raw materials and basic production steps. It also describes different types of tiles and pavers categorized by material (e.g. concrete, brick), shape (e.g. interlocking, non-interlocking), and application in areas like walkways, driveways, and patios. Advantages and disadvantages of various tile and paver materials are mentioned.
Waterproofing
The document discusses different types of waterproofing for buildings. It describes below grade waterproofing systems like cementitious coatings and liquid applied membranes. It also covers above grade waterproofing and roof waterproofing systems. Specific products are mentioned for different applications along with their properties and coverage rates. Key steps in the waterproofing application process include surface preparation through cleaning and repair, followed by installation of the waterproofing and providing protection.
Green Walls Technology: Benefits and Design
This document provides an introduction to green walls, also known as vertical gardens. It discusses the history and evolution of green wall technology. Green walls are divided into two categories: green facades, which use climbing plants on supporting structures, and living walls, which use pre-vegetated modular panels. The document outlines the environmental, social, and economic benefits of green walls, as well as factors for successful design and maintenance. It concludes by presenting several case studies of innovative green wall installations.
Low cost construction
1. The document summarizes various low-cost construction techniques for building housing, including using natural materials like stone, mud bricks, compressed earth blocks, and bamboo.
2. It describes construction methods like rat-trap bond, corbel arches, and filler slabs that reduce costs compared to standard practices.
3. The document provides details on over 15 different low-cost materials and building techniques that can be used to help provide quality, affordable housing.
Sustainable Architecture PPT
This powerpoint was prepared by Kris Wilson of DesignHomes NZ, for his talk to the students of Room 18, FFIS, Hamilton, NZ.
Milli Jain- School Furniture (Chair Design)
This Project Report On School Furniture Has Been Created, Developed And Designed By Me, During My Study Of Product Designing, Confirming To NSQF Level 6 Of NSDC.
In This Project I Have Discussed About Product Design And Amongst Various Products I Have Made An Elaborated Discussion Of Furniture Design, Its Timeline And Various Types. Classification Of Furniture, Functional Requirement Of A Furniture And Its Characteristics Has Also Been Discussed. After Their Study I Have Learned To Make A Furniture Ergonomically Sound. This Made Me Clear The Basic Level And Then I Moved Down On Developing Engineering Design Of Furniture I.E. Specifying The Construction Of Furniture Through Detail Drawings.
I Have Also Discussed About The Various Furniture Joints And Their Application In My Design.
I Request You To Kindly Go Through My Project Pages. As A Novice In This Field I Have Tried My Level Best To Bring Out The Best Of My Knowledge Gained At Dezyne E’cole College.
Turenscape
The document summarizes the Tianjin Qiaoyuan Park project in Tianjin, China. A former shooting range and garbage dump was regenerated into a low-maintenance urban park through landscape design that introduced natural processes. 21 ponds of varying sizes were dug to create diverse habitats and initiate plant adaptation. Native vegetation was allowed to establish, transforming the site into a park that provides stormwater management, soil improvement, and environmental education opportunities for the surrounding community. Within two years, the park achieved its goals and attracts thousands of daily visitors to experience the evolving landscape.
Green Building: Sustainable Architecture | Redlands, CA - McNaughton Architec...
Green Building: Sustainable Architecture | Redlands, CA - McNaughton Architec...McNaughton Architectural Inc.
Green Building: Sustainable Architecture
Environmentally responsible and resource efficient building design. Architecture that minimizes the negative environmental impact of buildings by efficiency in the use of materials and energy. Goal: to effectively reduce the overall impact of the built environment on human health and the natural environment and increase comfort and livability. Consistent with AIA sponsored Architecture Challenge 2030.
McNaughton Architectural Inc. | http://mna-p.com
300 E State St Suite 360, Redlands, CA 92373
(909) 583-1806
Green buildings
This ppt is more useful for Civil Engineering students.
I have prepared this ppt during my college days as a part of semester evaluation . Hope this will help to current civil students for their ppt presentations and in many more activities as a part of their semester assessments.
I have prepared this ppt as per the syllabus concerned in the particular topic of the subject, so one can directly use it just by editing their names.
Report on flooring
The document discusses various types of flooring materials including hard flooring like wood, stone and tile as well as soft flooring like carpet and resilient flooring. It provides details on different material options for flooring like concrete, wood, bamboo, laminate, linoleum and vinyl. It also discusses flooring installation and maintenance considerations as well as factors that influence material selection like cost, durability and moisture levels.
What's hot (20)
Green Building: Sustainable Architecture | Redlands, CA - McNaughton Architec...
Green Building: Sustainable Architecture | Redlands, CA - McNaughton Architec...
More from Fernanda Aiex * ATENA arquitetura
Apartamento na Vila Olimpia - São Paulo
Friends,
advert for sale / rent this apartment of 40m2 at Rua Professor Vahia de Abreu, 63 - Vila Olímpia - São Paulo, SP.
01 bedroom, living room, bathroom, kitchen and laundry area + 1 parking space and superior terrace.
It is equipped with a stove, refrigerator and washing machine. New electrical installations.
Close to the subway and Shopping Ibiraquera, train and Shopping Vila Olímpia (radius of 1 and 1.5 km) and bus line 100m away, on Avenida Santo Amaro.
2km from Ibirapuera Park, access by bike paths in Moema and Avenida Helio Pellegrino (10min by bike).
5 blocks from Anhembi Morumbi and Insper University.
Ideal for those who work or study in the region.
interested, please send me messages.
*
Amigos,
anuncio en venta / alquiler de este apartamento de 40m2 en Rua Professor Vahia de Abreu, 63 - Vila Olímpia - São Paulo, SP.
01 recámara, sala, baño, cocina y área de lavado + 1 estacionamiento y terraza superior.
Está equipado con una estufa, refrigerador y lavadora. Nuevas instalaciones eléctricas.
Cerca del metro y Shopping Ibiraquera, tren y Shopping Vila Olímpia (radio de 1 y 1,5 km) y línea de autobús a 100m, en la Avenida Santo Amaro.
A 2km del Parque Ibirapuera, acceso por carriles bici en Moema y Avenida Helio Pellegrino (10min en bici).
A 5 cuadras de Anhembi Morumbi e Insper University.
Ideal para quienes trabajan o estudian en la región.
interesado, por favor envíeme mensajes.
*
Amigos,
Estamos vendendo/ alugando este apartamento de 40m2 na Rua Professor Vahia de Abreu, 63 - Vila Olímpia - São Paulo, SP.
01 dormitório, sala, banheiro, cozinha e área de serviço + 1 vaga na garagem.
Está equipado com fogão, geladeira e máquina de lavar roupas. Instalações elétricas novas.
Próximo ao metrô e Shopping Ibiraquera, trem e Shopping Vila Olímpia (raio de 1 e 1,5km) e linha de ônibus a 100m, na Avenida Santo Amaro.
2km do parque do Ibirapuera, acesso por ciclofaixas em Moema e Avenida Helio Pellegrino (10min de bike).
5 quarteirões da Universidade Anhembi Morumbi e Insper.
Ideal para quem trabalha ou estuda na região.
interessados por favor me mandem mensagens.
Banhos Suítes
Estilo e combinação de Piso + Pedra:
01)
* Piso Portobello linha Ecollection
http://www.portobello.com.br/linhas/ecollection
(sugestão DECK EUCALIPTO AUTOCLAVADO PÁTINA 60X60 EXT BOLD)
* Pedra - Mármore Branco carrara ou Carrarinha
http://www.santorinimarmores.com.br/marmores/index.html
02)
* Piso Portobello linha Broadway ou Marmi
http://www.portobello.com.br/linhas/broadway
(sugestão LIME)
http://www.portobello.com.br/linhas/marmi-classico
Com filetes em detalhes http://www.portobello.com.br/produtos/atelier/mos-bianco-mix-sl-30X30-pol-1
* Pedra - Marmore Branco Piguês
ante-projeto PU
A União Europeia está preocupada com o aumento da desinformação online e propôs novas regras para combater as notícias falsas. As novas regras exigiriam que as plataformas de mídia social monitorassem o conteúdo ativamente e removessem rapidamente qualquer conteúdo considerado falso ou enganoso que possa prejudicar a saúde pública ou a segurança. Algumas organizações expressaram preocupações sobre como as novas regras podem afetar a liberdade de expressão.
Lojas
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Estudos Preliminares
A empresa de tecnologia anunciou um novo smartphone com câmera aprimorada, maior tela e bateria de longa duração. O dispositivo também possui processador mais rápido e armazenamento expansível. O novo modelo será lançado em outubro por um preço inicial de US$799.
Estudo Preliminar _ R00
A empresa de tecnologia anunciou um novo smartphone com câmera aprimorada, maior tela e bateria de longa duração. O dispositivo também possui processador mais rápido e armazenamento expansível. O lançamento está programado para o final do ano com preço inicial sugerido de US$799.
Lei 14223 26.09.2006_paisagens_urbanas
Esta lei estabelece normas para ordenar os elementos que compõem a paisagem urbana visível em logradouros públicos em São Paulo, definindo objetivos como o bem-estar estético e ambiental da população. A lei define termos como anúncio, área de exposição e fachada e estabelece diretrizes e estratégias para a implantação da política da paisagem urbana de forma a promover a melhoria da qualidade de vida urbana.
Cartilha _ lei Calçada
O documento fornece informações sobre as regras para construção e manutenção de calçadas na cidade de São Paulo, de acordo com o novo decreto municipal. As principais informações são:
1) As calçadas devem ser divididas em três faixas: de serviço, livre para pedestres e de acesso;
2) A faixa livre deve ter no mínimo 1,20m de largura e superfície plana e antiderrapante;
3) Nas esquinas, o mobiliário urbano deve ficar a pelo menos 5m do eixo da esqu
Casa do Ator
A empresa de tecnologia anunciou um novo smartphone com câmera aprimorada, maior tela e bateria de longa duração. O dispositivo também possui processador mais rápido e armazenamento expansível. O lançamento está programado para o próximo mês com preço inicial sugerido de US$799.
HI_ possibilidades
A empresa de tecnologia anunciou um novo produto, um smartphone com câmera avançada e bateria de longa duração. O aparelho custará menos de US$ 500 e estará disponível em lojas a partir de outubro, esperando competir com outros fabricantes de smartphones populares.
Paraiso _ loja Belas Artes
A União Europeia está preocupada com o impacto da inteligência artificial no mercado de trabalho. Estudos mostram que muitos empregos serão automatizados nos próximos anos, mas também que novos empregos serão criados. A UE quer garantir que os trabalhadores recebam treinamento para as novas profissões emergentes e sejam protegidos contra os efeitos da automação.
Fotos 31 janeiro 2015
A empresa está enfrentando desafios financeiros devido à queda nas vendas e precisa cortar custos. O departamento de marketing será reestruturado e alguns funcionários serão demitidos, enquanto outros serão transferidos para novas funções. Uma consulta externa foi contratada para ajudar a redesenhar o departamento de marketing para melhorar a eficiência e reduzir gastos.
Fotos obra 27jan2015
La pandemia de COVID-19 ha tenido un impacto significativo en la economía mundial. Muchos países experimentaron fuertes caídas en el PIB y aumentos en el desempleo en 2020 debido a los bloqueos y otras medidas de contención. A medida que se implementan las vacunas, se espera que la actividad económica se recupere en 2021 aunque el panorama sigue siendo incierto.
More from Fernanda Aiex * ATENA arquitetura (20)
Geodesic dome with bamboo and lashings
- 1. Geodesic dome with bamboo and lashings The concept of this dome is very simple: it is made from 2 different types of frame: a hexagon and a half hexagon- you will need 10 hexagons and 5 half hexagons. These are combined into a structure very simply!
- 2. in the picture below, each blue face is a whole hexagon, each purple face is a half hexagon: EASY GOING