The Neosens FS-1000 is a cost effective solution for continuously monitoring organic and inorganic fouling deposits in industrial processes in real-time. It consists of a probe that monitors fouling thickness within the process, enabling optimization of treatment and confirmation of effectiveness. Benefits include reduced operating costs, decreased chemical use, and extended equipment life by enabling early preventative monitoring.
This instrument is designed based on the IS0 14616 international standard. It is applicable to the precisely quantitative determination of the shrinking force, contracting force and shrinkage ratio for heatshrinkable plastic films during the thermal shrinkage process.
This instrument is based on the humidity sensor method, and is professionally applicable to the water vapor transmission rate test of film specimens. It is equipped with three individual test dishes, and the testing process is completely automatic and conforms to international standards.
This instrument is designed based on the IS0 14616 international standard. It is applicable to the precisely quantitative determination of the shrinking force, contracting force and shrinkage ratio for heatshrinkable plastic films during the thermal shrinkage process.
This instrument is based on the humidity sensor method, and is professionally applicable to the water vapor transmission rate test of film specimens. It is equipped with three individual test dishes, and the testing process is completely automatic and conforms to international standards.
CHY-CA Thickness Tester is designed based on the mechanical contacting method, which effectively ensures standard and accurate test data and applicable to thickness test of plastic films, sheets, diaphragms, paper, foils, silicon wafers and other materials within specified range.
Fast response times are a characteristic feature of the new Pt100 probe sensors of ifm electronic. They can be used for highly precise temperature measurements in industrial applications.
CHY-CA Thickness Tester is designed based on the mechanical contacting method, which effectively ensures standard and accurate test data and applicable to thickness test of plastic films, sheets, diaphragms, paper, foils, silicon wafers and other materials within specified range.
Fast response times are a characteristic feature of the new Pt100 probe sensors of ifm electronic. They can be used for highly precise temperature measurements in industrial applications.
We provide you Project Temperature Sensors – Types.You can choose the best of your choice and interest from the list of topics we suggested. All new project ideas that are appearing focuses to improve the knowledge of Engineering students.
https://www.elprocus.com
Visit our page to get more ideas on Project Report Format for Final Year Engineering Students these ideas developed by professionals.
Elprocus provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
Portable Turbidity meter with microprocessor controlled system, utilizes 90° scattered light principle to measure water turbidity in nephelometric
turbidity unit i.e. NTU. The formazine standard solution of turbidity mentioned in ISO 7027 is used for turbidity analysis. Portable meter, used in field
and lab scale analysis, delivers highly accurate results as per the GLP standards.
Bench top turbidity meter with microprocessor controlled system, works on 90° scattered light principle to measure water turbidity in nephelometric
turbidity unit i.e. NTU. The formazine standard solution of turbidity mentioned in ISO 7027 is used for turbidity analysis. This turbidity meter delivers
highly accurate results with better numerical calculations to meet GLP standards.
Datasheet Fluke Infrared Calibrator. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
This instrument is based on the combination of differential pressure method and chromatography analysis technology. It is the only instrument in the market so far that provides the quantitative and qualitative analysis of organic gas permeability of various films and sheeting materials.
Similar to Fouling sensor for Industrial Process (20)
1. Neosens FS-1000 INDUSTRIAL PROCESS
Unique and cost effective solution for monitoring
the presence of organic and non-organic deposits
in industrial process applications
Fouling is a multibillion dollar problem,
Applications reducing energy efficiency, increasing
maintenance costs and creating health risks.
Food industry
Beverage
Our approach consists in early, preventative,
Pulp & Paper online monitoring with a standard output
Oil & gas signal going either to controller or directly to
supervision room.
The sensor continuously monitors the
thickness of fouling within the process
Benefits enabling the optimization of treatment and
Real-time, continuous confirmation of treatments effectiveness.
& in-situ monitoring of
fouling in industrial
Example of probe model for Food & Beverage
processes
Resistant to harsh
environments
No maintenance
Features
Reduced operating
costs
Decreased chemical
discharge
Extended life of
industrial equipment
2. NEOSENS FS-1000 / General characteristics for industrial process applications
GENERAL
Probe dimensions 15mm (0.6 in) x L 130mm (5.1 in)
Fittings & Connection ½’’BSP, ½’’NPT, SMS25, CLAMP 2’’ or VARINLINE
Configuration In-line or by-pass
Approvals CE, EHEDG, ATEX
Wetted material 316L SS
Protection class IP65 or IP68
2 active analog outputs 4…20mA (max. 250
Outputs 1 analog output for thickness monitoring (configurable range)
1 analog output for temperature measurement (fixed range)
Power supply 0…12Vdc @ 60mA
Misc. Factory calibration
SPECIFICATIONS
Configurable monitoring ranges Accuracy
Fouling thickness monitoring 0…1mm (0…0.039 in)
or 1% Full Scale
0…5mm (0…0.197 in)
Response time <1mn @ 90%
Fixed range Accuracy
Temperature measurement
0…160°C (32…320°F) ±0.05°C (±0.1°F)
Temperature (stability) Pressure
Running conditions 0…160°C max (<1°C/min) 30 bars max.
0…320°F max (<1.8°F/min) 435 psi max.
Contact our sales-engineer team in order to define the probe model that best fulfills your
requirements and to discover all other great available features…
Photos: Neosens SA - Non-contractual document
Neosens S.A.
About Neosens
Diapason – Bat B Founded in 2001, and located outside Toulouse, France, Neosens develops and markets a new generation of sensor solutions to
Rue Jean Bart monitor and control the quality of any liquids in the environment and the industry to optimize industrial processes, to protect our
BP 57490 environment, and to extend life of equipment.
31674 Labège Cedex
France With expertise in electro-chemical fluid monitoring and microelectronics processes, Neosens has created a series of innovative
Tel +33 (0)5 61 75 62 47 sensors based on Micro-Electro-Mechanical Systems (MEMS) technology, which enables to reduce the size of the sensors, while
Fax +33 (0)5 61 75 63 08 increasing their precision and reliability in harsh environments. Neosens’ advanced solutions monitor water quality continuously,
sales@neo-sens.com in-situ and real-time for applications such as cooling systems, pulp & paper, food & beverage processing, and more.
www.neo-sens.com