60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules: Emmvee India
60 Monocrystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
5. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
72 Cell Modules and 60 cell modules (multi-crystalline)Emmvee India
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
60 Multi-crystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
- Insulation Resistance up to 1TΩ
- Short-Circuit Current up to 1.5mA
- Wide Test Voltage from 250V to 5000V
- Diagnosis Function of PI and DAR
- Newly-designed alligator clip
- It comes with a tough hard case
- Filter function reduces noise interference for obtaining stable measurement
- Large display with Bar Graph indication and backlight
Live voltage warning
- Safety standard IEC 61010-1 CAT IV 300V / CAT III 600V
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
Leakage Clamp Meter
• Least affected by external stray magnetic field.
• 20mA AC max. in proximity to a 15mm-dia conductor carrying 100A AC
• Frequency Selector Switch to eliminate the effect of harmonics.
• Resolution 0.1mA.
Inc. Accessories: 9097 Carrying Case, R03 × 2, Instruction Manual
Nominal voltages 50 V, 100 V, 250 V, 500 V and 1000 V
This instrument is suited for measurement of insulation resistance
at voltage-free devices and systems with nominal voltages of up
to 1000 V, and for the insulation testing of earth conductors, protective conductors and bonding conductors, including junctions
and connections.
60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules: Emmvee India
60 Monocrystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
5. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
72 Cell Modules and 60 cell modules (multi-crystalline)Emmvee India
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
60 Multi-crystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
- Insulation Resistance up to 1TΩ
- Short-Circuit Current up to 1.5mA
- Wide Test Voltage from 250V to 5000V
- Diagnosis Function of PI and DAR
- Newly-designed alligator clip
- It comes with a tough hard case
- Filter function reduces noise interference for obtaining stable measurement
- Large display with Bar Graph indication and backlight
Live voltage warning
- Safety standard IEC 61010-1 CAT IV 300V / CAT III 600V
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
Leakage Clamp Meter
• Least affected by external stray magnetic field.
• 20mA AC max. in proximity to a 15mm-dia conductor carrying 100A AC
• Frequency Selector Switch to eliminate the effect of harmonics.
• Resolution 0.1mA.
Inc. Accessories: 9097 Carrying Case, R03 × 2, Instruction Manual
Nominal voltages 50 V, 100 V, 250 V, 500 V and 1000 V
This instrument is suited for measurement of insulation resistance
at voltage-free devices and systems with nominal voltages of up
to 1000 V, and for the insulation testing of earth conductors, protective conductors and bonding conductors, including junctions
and connections.
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
Electrical test and measurement range of products from Josts ensures performance & reliability in power generation, transmission & distribution equipments
Megger designs and manufactures portable electric test equipment. Megger products help install, improve efficiency, reduce cost and extend the life of electrical assets. The Megger brand is so well known these days that some maintenance professionals incorrectly use it as a verb when they refer to doing an insulation test.
High Voltage Insulating mats are thin mats compared to traditional Rubber Matting but are highly dielectric in nature.
[ http://insulationmat.in/electrical-insulating-mats/ ]
Water Hardness Meter
Model: PWH-303
Lutron – Taiwan
Key Futures:
* Separate Pt glass electrode, high performance for pure water low conductivity measurement.
* Measurement water conductivity : 0 to 1999 uS .
* Measurement water hardness : 0 to 1000 ppm.
* Separate Meter with the probe, easy operation.
* Hold , Record ( max., min.).
* DC 1.5V battery ( UM-4/AAA ) x 4.
* Water conditioning , aquarium , food processing, photography , school ,laboratory, industrial and quality control.
For more information, please contact us
ROnex International | 47/2, Fazli Rabbi Road, Motijheel, Dhaka-1000. Bangladesh | Cell: +880 1811155717 | E-mail: ronexbd@gmail.com | Webs: https://ronexbd.wixsite.com/ronexbd | Skype: ronexbd | https://facebook.com/RonexInternational
Hioki Resistance Meter for Ultra-low and Low Shunt Resistance
A resistance tester that can measure super-low resistance values and shunt resistors
The Resistance Meter RM3543 can measure low shunt resistance values and other DC resistance values at a high accuracy of ±0.16% for 0.1 mΩ and at the high resolution* of 0.01 μΩ.
*In the 10 mΩ range, at SLOW measurement speed, and with 16 averaging iterations.
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
Electrical test and measurement range of products from Josts ensures performance & reliability in power generation, transmission & distribution equipments
Megger designs and manufactures portable electric test equipment. Megger products help install, improve efficiency, reduce cost and extend the life of electrical assets. The Megger brand is so well known these days that some maintenance professionals incorrectly use it as a verb when they refer to doing an insulation test.
High Voltage Insulating mats are thin mats compared to traditional Rubber Matting but are highly dielectric in nature.
[ http://insulationmat.in/electrical-insulating-mats/ ]
Water Hardness Meter
Model: PWH-303
Lutron – Taiwan
Key Futures:
* Separate Pt glass electrode, high performance for pure water low conductivity measurement.
* Measurement water conductivity : 0 to 1999 uS .
* Measurement water hardness : 0 to 1000 ppm.
* Separate Meter with the probe, easy operation.
* Hold , Record ( max., min.).
* DC 1.5V battery ( UM-4/AAA ) x 4.
* Water conditioning , aquarium , food processing, photography , school ,laboratory, industrial and quality control.
For more information, please contact us
ROnex International | 47/2, Fazli Rabbi Road, Motijheel, Dhaka-1000. Bangladesh | Cell: +880 1811155717 | E-mail: ronexbd@gmail.com | Webs: https://ronexbd.wixsite.com/ronexbd | Skype: ronexbd | https://facebook.com/RonexInternational
Hioki Resistance Meter for Ultra-low and Low Shunt Resistance
A resistance tester that can measure super-low resistance values and shunt resistors
The Resistance Meter RM3543 can measure low shunt resistance values and other DC resistance values at a high accuracy of ±0.16% for 0.1 mΩ and at the high resolution* of 0.01 μΩ.
*In the 10 mΩ range, at SLOW measurement speed, and with 16 averaging iterations.
Portable Conductivity Meter provides precise and steady measurements with various intelligent functions and with a strong structure. It is equipped with conductivity sensor to measure electrical conductance in the solution in a range 0 μS/cm to 100 mS/cm, TDS, the concentration of salt which is Salinity, Resistivity, and temperature. It comprises manual temperature compensation according to desired sample.Used widely at the remote area to check the integrity of drinking water and around the industries for measuring the ionic concentration and various laboratories for the researches and drug manufacture processes. In addition, it is used in agriculture to measure the salinity levels of surface water and soil samples and also measure the quality of water in a wastewater treatment facility.
Ultrasonic Level Indicator are suitable for measuring the Level if fluid in the tank by non contcat method.
The Instrument works on Sound Waves and the out put from the same ( 4 to 20 mA) is given to a Digital Level Indicator.
The instrument is suitable for Foam Free and fumes Free material only.
Types : 2-Wire Ultrasonic Level Transmitter & Self Compensating (3/4 Wire) Ultrasonic Level Transmitter
The salient features and specifications are as follow:
Simple push-button calibration (Accurate)
Output 4-20 mA / 20-4 mA
(Isolated on 4 Wire Model's only)
Built-in temperature compensation
Optional RS232 Or RS485 communications with calibration, diagnostics and data
logging software
PLC compatible
Three or Four Wire Operation
Self Cleaning operation of sensor face
APPLICATIONS
Solids (Models 25 U, 45U & 52U Below)
Solids Range Approx. ½ of liquid
C = Communication 4 for 485 or 2 for 232, Blank = no Communications
XX = Operating Frequency, U = Ultrasonic 400 = AC Power, 300 = DC Power
Kyoritsu 3125A Digital High Voltage Insulation Tester 5kVROnex International
Digital High Voltage Insulation Tester 5kV
Model: 3125A
Kyoritsu - Japan
Product Review
• Insulation Resistance up to 1TΩ
• Short-Circuit Current up to 1.5mA
• Wide Test Voltage from 250V to 5000V (250/500/1000/2500/5000V)
• Diagnosis function of polarization index (PI) and dielectric absorption ratio (DAR)
• Newly-designed alligator clip
• Supplied in hard carry case
For more information, please contact us
ROnex International | 47/2, Fazli Rabbi Road, Motijheel, Dhaka-1000. Bangladesh | Cell: +880 1811155717 | E-mail: ronexbd@gmail.com | Webs: https://ronexbd.wixsite.com/ronexbd | Skype: ronexbd | https://facebook.com/RonexInternational
Hioki FT6031-03 Earth Tester, Ground Resistance Tester, Dustproof and Waterpr...ROnex International
Earth Tester, Ground Resistance Tester, Dustproof and Waterproof
Model: FT6031-03
Hioki - Japan
Product Features:
• IP67 protected
• Test all ground types from Class A to Class D with a single meter
• Wide 0 to 2000ohm measurement range
• Minimize cabling time with innovative earthing rods and cable winder
For more information, please contact us
ROnex International | 47/2, Fazli Rabbi Road, Motijheel, Dhaka-1000. Bangladesh | Cell: +880 1811155717 | E-mail: ronexbd@gmail.com | Webs: https://ronexbd.wixsite.com/ronexbd | Skype: ronexbd | https://facebook.com/RonexInternational
Kyoritsu 4105A Digital Earth Tester
• Dust and drip-proof. (designed to IEC 529 IP54)
• In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories.
(unit can be hung from the neck for simplified measurement)
• Designed to meet IEC 61010-1 safety standard.
• Capable of measuring earth voltage.
• Automatic warning when the resistance of auxiliary earth spikes is in excess of tolerance.
• Small and lightweight. Shock resistant new case material.
• 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.
Hioki FT6031-03 Earth Tester, Ground Resistance Tester Dustproof and Waterproof ROnex International
Hioki FT6031-03 Earth Tester, Ground Resistance Tester, Dustproof and Waterproof in Bangladesh
Product Features:
IP67 protected
Test all ground types from Class A to Class D with a single meter
Wide 0 to 2000ohm measurement range
Minimize cabling time with innovative earthing rods and cable winder
1. 2 mS/20 mS/200 mS
CONDUCTIVITY METER
Model : CD-4301 ISO-9001, CE, IEC1010
LUTRON ELECTRONIC
2. CONDUCTIVITY METER
Model : CD-4301
FEATURES
* The portable conductivity meter provides fast, accurate readings, with
digital readability and the convenience of a remote probe separately.
* Multi-measuring ranges: 199.9 uS, 1.999 mS, 19.99 mS.
* DATA HOLD function for stored the desired value on display.
* Large LCD display for low power consumption & clear read-out
even in bright ambient light condition.
* Used the durable, long-lasting components, including a strong,
light weight ABS-plastic housing case.
* Compact size, designed for easy carry out & operation.
* Built-in low battery indicator.
* Wide applications: water contioning, aquariums, beverage, fish hatcheries,
food processing, photography, laboratory, paper industry, plating industry,
quality control, school & college, water conditioning.
GENERAL SPECIFICATIONS
Display 18 mm (0.7") LCD, 3 1/2 digits.,
3 1/2 digits, max. display 1999.
Measurement & 199.9 uS, 1.999 mS, 19.99 mS, Data Hold.
Range * Build in 199.9 mS range, it only for reference,
not specify the accuracy.
Resolution 0.1 uS for 199.9 uS range.
0.001 mS for 1.999 mS range.
0.01 mS for 19.99 mS range.
* uS : micro Simens, mS : milli-Simens
Accuracy ± ( 2% F.S. + 1 d )
( 23 5 蚓 ) * F. S. - Full scale
Over Range Display shows '1'.
Indicator
Sampling Time Approx. 0.4 second.
Temp. Automatic, 0 to 50 (32 to 122 ).
℃ ℉
Compensation
Operating Temp. 0 to 50 ( 32 to 122 ).
℃ ℉
Operating Max. 80% RH.
Humidity
Power Supply 006P DC 9V battery(heavy duty type).
Power Current Approx. DC 5 mA.
Weight 340 g/0.75 LB(w/battery & electrode).
Dimension 168 x 80 x 35mm (6.6 x 3.2 x 1.2 inch).
Electrode Size Round, 22 mm Dia. x 120 mm length.
Accessories Instruction Manual............................. 1 PC.
Included Conductivity electrode........................ 1 PC.
Carrying Case.................................... 1 PC.
Calibrtaion Solution Optional, 1.413 mS calibration solution, CD-14.
* Appearance and specifications listed in this brochure are subject to change without notice. 0702-CD4301