The Filtek 1000 hour oil and fuel filtration solution consists of two canisters housing unique filter elements that enable companies to save over 50% on operating costs of remote generator sites. It extends generator service life to 1000 hours and reduces fuel consumption by 5-13% per year, resulting in a 45 day return on investment. The system can be installed on existing generators in about 20 minutes without highly skilled labor.
Filtek Filtration is one of the leading manufacturers of Centrifugal Oil Filters, with more than 1000 Installation throughout the Globe. Filtek since its inception has history of working with top-tier players in the Machinery Ecosystem.
CONTACT US @
Email : ninad@filtekindia.com
Mob : +91 9422046080
Website : www.filtekfiltration.com
Filtek offers a tried, tested and proven solution whereby savings in excess of 60% on annual DG maintenance costs are realised.
This is achieved by extending service intervals on DG’s from the current 250hrs to 1,000hrs.
Oil as such does NOT breakdown at 250hrs but rather becomes contaminated to a degree where engine wear becomes a concern.
The 30micron OEM spin-on filter is no longer able to effectively cope with contaminates and an oil change is recommended
In a Series-A funding, a DalinYebo's group company, Cobelec (Pty) Ltd, wishes to raise R10m to complete the BFS, in exchange for 20-25% share holding in the uThukela GreenEnergyPark™ SPV.
The investor will have a first right of refusal to participate in the Series-B finance, during which we shall raise R80 million, about R24million in equity and R56million in project loan (30:70 gearing). R18 million of working capital would either be funded with a short term loan, but may not be necessary as there is and immediate an strong cash-flow.
For additional information, visit:
- www.dalinyebo.com/presentation/uthukela-greenenergypark
- www.dalinyebo.com/greenenergypark
- www.greenenergypark.co.za
Filtek Filtration is one of the leading manufacturers of Centrifugal Oil Filters, with more than 1000 Installation throughout the Globe. Filtek since its inception has history of working with top-tier players in the Machinery Ecosystem.
CONTACT US @
Email : ninad@filtekindia.com
Mob : +91 9422046080
Website : www.filtekfiltration.com
Filtek offers a tried, tested and proven solution whereby savings in excess of 60% on annual DG maintenance costs are realised.
This is achieved by extending service intervals on DG’s from the current 250hrs to 1,000hrs.
Oil as such does NOT breakdown at 250hrs but rather becomes contaminated to a degree where engine wear becomes a concern.
The 30micron OEM spin-on filter is no longer able to effectively cope with contaminates and an oil change is recommended
In a Series-A funding, a DalinYebo's group company, Cobelec (Pty) Ltd, wishes to raise R10m to complete the BFS, in exchange for 20-25% share holding in the uThukela GreenEnergyPark™ SPV.
The investor will have a first right of refusal to participate in the Series-B finance, during which we shall raise R80 million, about R24million in equity and R56million in project loan (30:70 gearing). R18 million of working capital would either be funded with a short term loan, but may not be necessary as there is and immediate an strong cash-flow.
For additional information, visit:
- www.dalinyebo.com/presentation/uthukela-greenenergypark
- www.dalinyebo.com/greenenergypark
- www.greenenergypark.co.za
1. 1,000 hour
oil and fuel filtration solution What is
the Filtek 1,000 hour solution?
The Filtek System consist of two canisters, each housing a unique oil
and fuel filter element.
Implementing the system enables companies
Reduce service costs
to save +50%
Reduce fuel and oil consumption on the operating cost of remote gen. set sites.
Carbon tax reductions
Installation on existing generators Filtek 1000 series - A typical system, including canisters and elements
Part number Item
A 45 day return on investment OC-1000
FC-1000
1 x Oil Canister
1 x Fuel Canister
RE-1000 2 x Filter element Filtek Industries Limited,
Business Development Africa & Middle East
Installation accessories Tel : +234 1 270 3301
Part number Item
1/4"JIC (90) *1/4"JIC (90) *2000 1 x High pressures hose - 2m Mobile : +234-816-332-7568 (Nigeria)
1/4"JIC (90)*1/4"JIC (180)*1700 1 x High pressures hose -1.7m Mobile: +27 72 059 9363 (South Africa)
1/4"JIC (90) * None * 1000 2 x Low pressure fuel hose - 1m
3/8" NPT * 1/4"JIC 1 x Hose adaptor
1/4"NPT * 1/4"JIC 3 x Hose adaptor Ebène House, 3rd Floor, 33 Cybercity, Ebène,
1/8"NPT * 1/8"NPT * 1/8"NPT 1 x T-piece
1/8"NPT * 1/4"JIC 2 x Hose adaptor Mauritius
1/8"NPT*1/8"NPT 1 x Hose adaptor
6mm Hose clamp 2 x Hose clamps (low pressure)
FLT-1000 1 x Thread sealant - small tube 20ml
PO Box 65053, Erasmusrand, 0165
www.filtek.co
sales@filtek.co
2. We have offices in South Africa & Nigeria.
Generator Generator service Reduce fuel Potential to earn
We have been manufacturing filters for 32 years.
optimisation life is extended up consumption Carbon Credits or now producing over 60 000 units per year.
to 1000 hours carbon tax
Numerous industry awards
The benefits of clean oil and Water, bacteria and sludge are reductions
fuel are irrefutable in the Current service intervals at 250 the main issues causing higher
reduction in consumption and hours and 33 times per year for than average fuel consump- Telecommunications have the capabil-
sites running only on genera-
machine life. Africa has over
600 million mobile subscrip- tors, by using our system your
tion. Contaminated diesel
results in the engine missing,
ity to deliver societal solutions which
can contribute to a global carbon lean
9001:2000
tions making it the fastest generators are serviced every reduced fuel efficiency, lack of economy. A typical diesel generator
growing telecoms market in 1000 hours or only 8 times per power, excessive exhaust, produces about 30 pounds of NOx per
the world. Of the 300_000 sites year. engine knocking, hard start- hour. NOx from diesel emissions are
built in the last 5 years, ing, Water in the diesel also carcinogenic and can cause of up to 70
approximately 80_000 of these increases acid and sludge percent of atmospheric induced
sites have no utility power build up. Cleaning the fuel cancers.
access. Generators remain by results in vastly improved Filtek does not increase Waste Hydro-
75 % saving on services
some margin the most cost combustion and ultimately carbon usage due to the increased
effective power solution per every year vastly improved consumption. drainage intervals. Equates to 66% less
1Kw/h generated. Depending on the condition oil.
of the diesel fuel and engine
Proven between 5% & 13% age the consumption Exceeds new emission standards
saving in fuel per year improvements have been
+ Complies with environmental laws Meets industry
from 5% to 13% saving in fuel
Low upfront CAPEX per year. Filter excedes new specifications
emission standards and
complies with environmental
laws.
No excess oil is Installation on Immediate return Significant Filter size counts
used causing a oil existing on investment Without Filtek aincrease visits
site needs 33 in
Removing particles between 1 and 3µ
saving of 66% generators machine life + removal of emulsified sludge and moisture
Other systems may increase
the sump size of the engine The system can be factory Alternative power solutions Keeping oil and fuel clean The standard paper oil and
fitted or field installed to such as wind, solar and hybrid extends the overall generator fuel filters are about 2mm
and therefore cannot be
existing generators The system power sources require in life; OEM filters neither have thick and filter down to about
retrofit. Filtek only requires
does NOT required highly most cases several years to the capacity or fine filtration 10-30 microns in particle size.
500ml of additional oil per skilled personal to install. A provide a ‘return on invest- capabilities (+10 micron) to Filtek oil filtration systems
1,000 hrs. Existing genera- complete installation takes ment’. provide adequate filtration have several hundred times
tors that are long in their life about 20 minutes. The system beyond 250 hrs. Filtek removes the surface area and density
cycle may require a Filtek Oil is delivered as a complete kit Once fitted, a Filtek solution contaminants down to 1 conventional spin-on filters.
Top-up Unit. with all components required will commence paying for micron and keeps the harmful Filtek filters the oil and fuel
to complete an installation. itself after just 250 hrs. particles out of the engine and down to 1 micron in size
The “ease of installation” extending the overall life cycle. thereby protecting the engine.
design is one of the systems Depending on the service Removes particulate
benefits in a market where cost per country the Filtek between1 and 3μ including
time and resources come at a system will pay for itself in emulsified sludge and mois-
premium. just 3-5 months. ture (water).
Re-deployable
Deploy on any Genset Size
The Filtek system does not rely on any oil reservoirs or other components normally incorporated
within the generator canopy or sound proofing. As such the system can be transferred to a new
or existing generator making it a fully transferable asset.