This document appears to be a site plan for a proposed DayCareCentre project. It includes information such as the project name, number, drawing number, scale, date, and sheets. The site plan drawing series is for construction and was created by a student for their lecturer as part of a project.
This document contains construction specifications and details for flooring, walls, roofs, and elevations of a building. It includes materials, dimensions, and installation order for floor finishes, wall assemblies, roofing systems, and notes room names and areas on the floor plans. Diagrams show wall sections, elevations, and construction details.
This document provides construction details for building elements including foundations, walls, roofs, and flooring materials. It includes sections, elevations, and schedules with information like dimensions, materials used, and floor finishes. Plan drawings are referenced that show the layout of rooms and spaces in the building. Construction methods are specified through descriptions of layers of materials like concrete, insulation, plasterboard and their order of installation.
The document contains a floor plan for a day care center with various rooms labeled including a reception area, family room, locker room, lounge/dining room, occupational therapy room, nurses room, doctors office, dispensary, equipment room, chiropody room, and physiotherapy room. The floor plan details the areas of each room in square meters and notes floor finishes and levels. It also includes designations for patient, staff, and walk areas along with the project name, number, scale, date, and attribution.
This document contains building plans and details including floor levels, materials, and dimensions. It lists floor levels such as ground floor, eaves, ceiling, window head and sill levels. It specifies materials like timber cladding, aluminum flashing, and double glazing windows. It provides dimensions for frames and downpipes. It also includes codes like window and door codes, material codes, and date codes.
This document contains construction drawings and details for a day care center project. It includes details for beam foundations, floor slabs, wall assemblies, roof structure, windows and other building elements. The drawings show material specifications and dimensions for structural elements like concrete foundations, insulation, framing and cladding systems. Dimensioned section cuts provide cross-sectional views of wall assemblies.
The document provides construction details for different areas of a building including foundations, floors, walls, roofs, and ceilings. It lists materials and specifications used for the raft foundation, concrete floors, timber and metal stud walls, metal deck roof, and suspended ceiling. Dimensions and thicknesses are provided for each material layer. Diagrams and drawings with labels are included to illustrate the building details.
This document appears to be a site plan for a proposed DayCareCentre project. It includes information such as the project name, number, drawing number, scale, date, and sheets. The site plan drawing series is for construction and was created by a student for their lecturer as part of a project.
This document contains construction specifications and details for flooring, walls, roofs, and elevations of a building. It includes materials, dimensions, and installation order for floor finishes, wall assemblies, roofing systems, and notes room names and areas on the floor plans. Diagrams show wall sections, elevations, and construction details.
This document provides construction details for building elements including foundations, walls, roofs, and flooring materials. It includes sections, elevations, and schedules with information like dimensions, materials used, and floor finishes. Plan drawings are referenced that show the layout of rooms and spaces in the building. Construction methods are specified through descriptions of layers of materials like concrete, insulation, plasterboard and their order of installation.
The document contains a floor plan for a day care center with various rooms labeled including a reception area, family room, locker room, lounge/dining room, occupational therapy room, nurses room, doctors office, dispensary, equipment room, chiropody room, and physiotherapy room. The floor plan details the areas of each room in square meters and notes floor finishes and levels. It also includes designations for patient, staff, and walk areas along with the project name, number, scale, date, and attribution.
This document contains building plans and details including floor levels, materials, and dimensions. It lists floor levels such as ground floor, eaves, ceiling, window head and sill levels. It specifies materials like timber cladding, aluminum flashing, and double glazing windows. It provides dimensions for frames and downpipes. It also includes codes like window and door codes, material codes, and date codes.
This document contains construction drawings and details for a day care center project. It includes details for beam foundations, floor slabs, wall assemblies, roof structure, windows and other building elements. The drawings show material specifications and dimensions for structural elements like concrete foundations, insulation, framing and cladding systems. Dimensioned section cuts provide cross-sectional views of wall assemblies.
The document provides construction details for different areas of a building including foundations, floors, walls, roofs, and ceilings. It lists materials and specifications used for the raft foundation, concrete floors, timber and metal stud walls, metal deck roof, and suspended ceiling. Dimensions and thicknesses are provided for each material layer. Diagrams and drawings with labels are included to illustrate the building details.
This document contains technical specifications for timber components used in the construction of a building project. It lists 6 different timber components labeled T1 through T6 along with their quantities, dimensions, and load specifications. It also provides notes about bracing requirements and limits based on wind zone. The document was generated by WolfPlan software for a project located at Ashwood Walk and specifies the timber will be supplied by Dempsey Timber Engineering.
This document contains technical specifications and design details for the roof structure of a building project including dimensions and spacing of roof members, load assumptions, project name and location, company names and contact details. It lists the members to be used for jack rafters, purlins, ceiling joists, and binders. It also includes notes about design responsibility and a disclaimer of liability.
The document provides technical specifications for a building project including truss specifications, bracing requirements, and load information. It lists 14 No. T6 trusses that are 9810 mm long and have a 25.0 kg/ply rating. The bracing limits specify the highest wind zone for wall plate heights less than 3.0 m is D, less than 5.7 m is D, and less than 8.4 m is C. The document also details the truss spacing, roof loads for tiles and snow, the project location, and was drawn by Patrick Higgins.
This document contains technical specifications and design plans for trusses to be used in a building project. It includes dimensions and weights for 16 different truss types (T1-T16). It also lists the quantities and types of connectors needed, including truss clips, framing anchors, truss shoes, and restraint straps. Accompanying diagrams show a truss layout, component labels, and bracing details.
This document contains technical building plans and specifications for a garage structure, including truss layout details, bracing requirements, wind zone limits, and load information. It also notes that the building designer is responsible for ensuring overall structural stability and that the information is supplied without liability.
This document contains specifications for 4 types of trusses - T1, T2, T3, and T4. It provides details on the number, dimensions, and load ratings of each truss type. It also includes notes on materials, project details, and engineering responsibilities.
This document contains details of timber truss designs and specifications for a construction project. It includes 14 different truss designs labeled T1 through T14 with details like number of plies, weight per ply, and connecting hardware. It also provides information like project name, drawings number, date, designer name, spacing and load specifications. The trusses are made of 35x122 T26 timber and connect to ceiling ties, wall plates, and rafters. This summary covers the key aspects and essential information contained in the document.
The document provides technical specifications for trusses used in a building project, including:
- Details on two truss designs, T1 and T2, with varying ply counts and weights.
- A list of fasteners and restraint straps required for installation, including quantities of each.
- Notes indicating the trusses will be installed at 600mm spacing and must withstand tile and snow loads.
- A truss layout diagram showing the arrangement and numbering of 17 T1 and 2 T2 trusses.
This document contains information about the design of a roof structure including specifications for 10 different truss types labeled T6 through T10. It lists the design loads of tiles and snow, provides dimensions and spacing for each truss, and notes the number and weight per ply of some of the trusses. It also contains information about the company that prepared the design, the date, drafter, and a note indicating the building designer is responsible for overall structural stability.
This document provides specifications for 20 timber tanks labeled T1 through T20. It details the dimensions and materials used for each tank, including the number of plywood layers and total weight. It also includes engineering drawings with labeling for roof and wall bracing components. The document is intended to ensure structural stability but notes that roof bracing is outside the scope of the given standard. It warns that an unsupported wall length exceeds 9 meters.
This document contains technical specifications and design plans for a truss system with 15 trusses spaced at 600mm. The trusses are made of T26 grade timber and include jack rafters, purlins, binders, and floor joists. Fastening components like truss clips, framing anchors, and restraint straps are specified. Dimensions, spacing, and loading information is provided along with notes indicating this is a preliminary design and the overall structure stability is the responsibility of the building designer.
This document contains design plans and specifications for a timber roof structure. It includes dimensions and material types for various roof truss components including jack rafters, ridgeboards, and hip boards. It lists 32 roof trusses divided into 3 types (T1, T2, T3) along with their quantities, spacing, and design loads. It provides bracing details and notes the responsibility of the building designer to ensure overall structural stability.
The document contains technical specifications for various engineered wood joists, including their dimensions, weight, number of plies, and other details. There are specifications provided for 21 different joist designs labeled J1 through J21. The joists range in length from 1063mm to 6362mm, thickness from 72mm to 147mm, and weight from 6.5kg to 60.3kg. Disclaimer text is also included stating that the stability of the overall structure is the responsibility of the building designer.
This document contains technical specifications and details for roof truss installation including dimensions, materials, bracing details, and load information. It specifies truss layout and bracing configurations using abbreviations like RL, RD, CL. It also notes this is a draft plan provided without liability and the builder is responsible for structural stability.
The document contains technical specifications for roof trusses including:
- Details on 3 different truss designs (T1, T2, T3) including dimensions and load ratings.
- A legend listing the number of each truss type.
- Disclaimers about design responsibility and bracing.
- A warning about an unsupported wall length exceeding 9m.
- Details on rafters, hip boards, and ceiling joists.
- Drawings showing a 3D view and section of the roof layout.
This document contains technical specifications and design plans for roof trusses of a building project. It includes dimensions and spacing for three different truss designs (T1, T2, T3) with varying weights, as well as legends explaining the components. Additionally, it notes the ceiling tie level, rafter level, roof load assumptions, manufacturer details, and has been checked by an engineer for structural stability.
This document contains a bill of materials for timber truss components used in a roofing project. It lists 18 trusses with details like piece count, weight, and fasteners required. It also includes diagrams of the truss design, layout, and structural components. Additional information is provided about design loads, site location, and limitations of liability.
This document contains technical specifications and drawings for roof truss design and construction including truss types, dimensions, spacing, loads, and bracing requirements. It provides guidance on standard bracing limits for different wall plate heights and wind zones. The drawings show a typical roof section and truss layout with notes on rafters, purlins, and ceiling joists.
This document contains technical specifications and design details for trusses to be used in a building project. It includes information on five different truss designs labeled T1 through T5, listing the number of each type, weight per piece, and dimensions. It also provides notes on truss components like rafters, ridgeboards, and purlins. The document was created by Wolf Systems for a project in Hollywood, Wicklow, and specifies loads, spacing, and has been checked by Dempsey Timber Engineering.
This document contains technical specifications and design plans for trusses and structural elements of a building. It includes dimensions, weights, and placement of 9 different truss types (T1-T9) along with rafters, ridgeboards, and ceiling joists. It also notes bracing details, design responsibilities, and attribution for the plans to Dempsey Timber Engineering and Wolf Systems Ltd.
This document contains technical specifications for timber components used in the construction of a building project. It lists 6 different timber components labeled T1 through T6 along with their quantities, dimensions, and load specifications. It also provides notes about bracing requirements and limits based on wind zone. The document was generated by WolfPlan software for a project located at Ashwood Walk and specifies the timber will be supplied by Dempsey Timber Engineering.
This document contains technical specifications and design details for the roof structure of a building project including dimensions and spacing of roof members, load assumptions, project name and location, company names and contact details. It lists the members to be used for jack rafters, purlins, ceiling joists, and binders. It also includes notes about design responsibility and a disclaimer of liability.
The document provides technical specifications for a building project including truss specifications, bracing requirements, and load information. It lists 14 No. T6 trusses that are 9810 mm long and have a 25.0 kg/ply rating. The bracing limits specify the highest wind zone for wall plate heights less than 3.0 m is D, less than 5.7 m is D, and less than 8.4 m is C. The document also details the truss spacing, roof loads for tiles and snow, the project location, and was drawn by Patrick Higgins.
This document contains technical specifications and design plans for trusses to be used in a building project. It includes dimensions and weights for 16 different truss types (T1-T16). It also lists the quantities and types of connectors needed, including truss clips, framing anchors, truss shoes, and restraint straps. Accompanying diagrams show a truss layout, component labels, and bracing details.
This document contains technical building plans and specifications for a garage structure, including truss layout details, bracing requirements, wind zone limits, and load information. It also notes that the building designer is responsible for ensuring overall structural stability and that the information is supplied without liability.
This document contains specifications for 4 types of trusses - T1, T2, T3, and T4. It provides details on the number, dimensions, and load ratings of each truss type. It also includes notes on materials, project details, and engineering responsibilities.
This document contains details of timber truss designs and specifications for a construction project. It includes 14 different truss designs labeled T1 through T14 with details like number of plies, weight per ply, and connecting hardware. It also provides information like project name, drawings number, date, designer name, spacing and load specifications. The trusses are made of 35x122 T26 timber and connect to ceiling ties, wall plates, and rafters. This summary covers the key aspects and essential information contained in the document.
The document provides technical specifications for trusses used in a building project, including:
- Details on two truss designs, T1 and T2, with varying ply counts and weights.
- A list of fasteners and restraint straps required for installation, including quantities of each.
- Notes indicating the trusses will be installed at 600mm spacing and must withstand tile and snow loads.
- A truss layout diagram showing the arrangement and numbering of 17 T1 and 2 T2 trusses.
This document contains information about the design of a roof structure including specifications for 10 different truss types labeled T6 through T10. It lists the design loads of tiles and snow, provides dimensions and spacing for each truss, and notes the number and weight per ply of some of the trusses. It also contains information about the company that prepared the design, the date, drafter, and a note indicating the building designer is responsible for overall structural stability.
This document provides specifications for 20 timber tanks labeled T1 through T20. It details the dimensions and materials used for each tank, including the number of plywood layers and total weight. It also includes engineering drawings with labeling for roof and wall bracing components. The document is intended to ensure structural stability but notes that roof bracing is outside the scope of the given standard. It warns that an unsupported wall length exceeds 9 meters.
This document contains technical specifications and design plans for a truss system with 15 trusses spaced at 600mm. The trusses are made of T26 grade timber and include jack rafters, purlins, binders, and floor joists. Fastening components like truss clips, framing anchors, and restraint straps are specified. Dimensions, spacing, and loading information is provided along with notes indicating this is a preliminary design and the overall structure stability is the responsibility of the building designer.
This document contains design plans and specifications for a timber roof structure. It includes dimensions and material types for various roof truss components including jack rafters, ridgeboards, and hip boards. It lists 32 roof trusses divided into 3 types (T1, T2, T3) along with their quantities, spacing, and design loads. It provides bracing details and notes the responsibility of the building designer to ensure overall structural stability.
The document contains technical specifications for various engineered wood joists, including their dimensions, weight, number of plies, and other details. There are specifications provided for 21 different joist designs labeled J1 through J21. The joists range in length from 1063mm to 6362mm, thickness from 72mm to 147mm, and weight from 6.5kg to 60.3kg. Disclaimer text is also included stating that the stability of the overall structure is the responsibility of the building designer.
This document contains technical specifications and details for roof truss installation including dimensions, materials, bracing details, and load information. It specifies truss layout and bracing configurations using abbreviations like RL, RD, CL. It also notes this is a draft plan provided without liability and the builder is responsible for structural stability.
The document contains technical specifications for roof trusses including:
- Details on 3 different truss designs (T1, T2, T3) including dimensions and load ratings.
- A legend listing the number of each truss type.
- Disclaimers about design responsibility and bracing.
- A warning about an unsupported wall length exceeding 9m.
- Details on rafters, hip boards, and ceiling joists.
- Drawings showing a 3D view and section of the roof layout.
This document contains technical specifications and design plans for roof trusses of a building project. It includes dimensions and spacing for three different truss designs (T1, T2, T3) with varying weights, as well as legends explaining the components. Additionally, it notes the ceiling tie level, rafter level, roof load assumptions, manufacturer details, and has been checked by an engineer for structural stability.
This document contains a bill of materials for timber truss components used in a roofing project. It lists 18 trusses with details like piece count, weight, and fasteners required. It also includes diagrams of the truss design, layout, and structural components. Additional information is provided about design loads, site location, and limitations of liability.
This document contains technical specifications and drawings for roof truss design and construction including truss types, dimensions, spacing, loads, and bracing requirements. It provides guidance on standard bracing limits for different wall plate heights and wind zones. The drawings show a typical roof section and truss layout with notes on rafters, purlins, and ceiling joists.
This document contains technical specifications and design details for trusses to be used in a building project. It includes information on five different truss designs labeled T1 through T5, listing the number of each type, weight per piece, and dimensions. It also provides notes on truss components like rafters, ridgeboards, and purlins. The document was created by Wolf Systems for a project in Hollywood, Wicklow, and specifies loads, spacing, and has been checked by Dempsey Timber Engineering.
This document contains technical specifications and design plans for trusses and structural elements of a building. It includes dimensions, weights, and placement of 9 different truss types (T1-T9) along with rafters, ridgeboards, and ceiling joists. It also notes bracing details, design responsibilities, and attribution for the plans to Dempsey Timber Engineering and Wolf Systems Ltd.