4. To be a financially
successful corporation
with a global presence;
through investment in
systems, processes,
technology and human
assets to ensure high
levels of quality, service
efficiency, safety and
environmental
consciousness.
MISSION
HPL Additives Limited
AN ISO 9001 • ISO 14001 • OHSAS 18001 COMPANY
01
5. in industry for the year 2003
was presented to the company by
the Department of Scientific and
Industrial Research, Ministry of
Science & Technology, Government
of India, in recognition of Research
& Development in the Chemicals
and Allied industries sector.
ACHARYA P.C.RAY AWARDS
for development of Indigenous
Technology for the year 2005-2006
and again in year 2010 conferred by
Indian Chemical Council.
THE BEST RESEARCH AWARD
for the year 2009 (Polymer Science,
Technology and Engineering) for
commercializing ANTIOXIDANT
products by Plastindia Foundation.
FIRST GRADE AWARD
for its Export Performance during
year 2006-07 conferred by Basic
Chemicals, & Cosmetics Export
Promotion Council (CHEMEXCIL),
Mumbai, Ministry of Commerce &
Industry, Goverment of India.
NATIONAL AWARD FOR R&D EFFORTS
NATIONAL AWARDS
IMSPOLICY
To achieve its mission, HPL will demonstrate
continual improvement in its management
systems through:
Proactive upgradation of technology and
manufacturing facilities to meet future challenges.
Excellence in systems and processes to improve
throughput, efficiency and productivity.
Continuous product development and research to
cater to ever evolving customer needs.
Consistent quality, timely delivery and world class
service to meet the exacting expectations of all
customers.
Upgradation of knowledge, competence and skills
of empowered human assets.
Completely safe and healthy work conditions.
Conservation of natural resources.
Prevention of pollution and waste minimization.
Prevention of ill health for all under the control.
Compliance with statutory and regulatory provisions.
Communicating this policy to all persons working for,
or on behalf of organization and to make it available to
interested parties.
02
6. 03
was founded in 1964 as the first plant of its kind manufacturing Chemical
Blowing Agents in the country. Over the years it has vastly increased the
product range to include Antioxidants, UV-Light Stabilizers, Optical
Brighteners for plastics, Azo-Initiators (also used as
polymerization catalysts), Chain Extenders and Cross-Linking Agents for
polymers, Water Treatment Chemicals and Biocides, Specialty Chemicals
(used in the manufacture of pharma and agro intermediates), Hydrazine
hydrate and Hydrazine derivatives.
The company has four manufacturing sites : three in Faridabad (Haryana) and one in Derabassi (Punjab). All plants
are DCS/PLC controlled and equipped with state-of-the-art instruments ensuring reliable and safe processes. There
is a big focus on ensuring safe operating conditions and environment at all plants.
All technologies have been developed in-house and there are no technical know-how transfer agreements, joint
ventures or collaborations for any of the products manufactured by the company. The technology development starts
from the R&D and then progresses through the Technology Development group, the Projects and Engineering
Services group, the Manufacturing group, the Environment, Health and Safety (EHS) group before it is finalized and
blue-printed. Inter-departmental interface and ratification ensures safety, reliability, efficiency of processes,
excellent product quality due to stringent design inputs and reduces development and commercialization time.
The R&D cell is the fountainhead for all research. It is well equipped with state-of-the-art equipment and
instruments. It boasts of highly qualified scientists and chemists from leading academic institutions across the
country. The R&D cell at HPL is recognized by the Department of Scientific & Industrial Research, Ministry of
Science & Technology, Government of India.
There are scale up and Computer Aided Design (CAD) facilities. The validation of the process capabilities is self
sufficient from the product design to project commissioning.
HPL believes in systems and good manufacturing practices. It is an ISO 9001 certified company since 1997. The
QMS ensures job clarity, documented procedure and process control right from raw materials to finished products.
Today, HPL has less than 0.2% in-house and less than 0.1% customer non-conformance. Corrective and preventive
action systems are in place to continually improve the product, processes and practices.
The world of reality has its limits; the world of imagination is boundless.
JEAN-JACQUES ROUSSEAU
7. 04
HPL believes in sustainable and a socially responsible business and has installed an EMS, certified under ISO : 14001
in 2001 by DNV. As a step forward in its commitment to provide a safe and healthy work environment to all, HPL has
complied with and obtained OHSAS : 18001 certification in 2006. HPL owes its success to its people and believes that
human resource is an important input to its business process. Constant training, skill upgradation, motivation,
transparent policies, clarity of career path, rewards for excellence are some of the tools HPL uses to get the best out
of its people.
HPL has established its position in both domestic and international markets and has a growth rate of approximately
30% a year. Exports to the developed markets of Europe and USA account for almost 50% of the company’s turnover.
Today HPL has a sales and distribution network in 49 countries across the world. In the Indian market, HPL has over
75% market share for all the products it manufactures. It has been able to maintain this share in-spite of reduction in
import tariffs and in the face of global competition. This is due to company's focus on Quality, Delivery and Service.
To make its processes more efficient, HPL has put in place JDE / Edwards ERP platform for its all operations across
the company, capturing real time information for executive decision making.
HPL has also identified Collaborative and Contract Research as another driver for its growth, where its established
R&D skill-set shall be leveraged to offer a host of services to identify market niche'.
8. The world of reality has its limits; the world of imagination is boundless.
JEAN-JACQUES ROUSSEAU
value additives for over 49 years
The REACH process had started with the pre-registration of substances having dead line
December 1, 2008. There is transitional period to complete the registration process for
existing substances with phased-in deadlines of 2010, 2013 and 2018 depending on the
annual quantities imported in the Europe and the hazard of the substance.
As a responsible manufacturer of specialty chemicals, HPL has always been attentive
to the way chemical substances are used and continuously develop policies that aim to
improve the safety and health of people as well as the environment. This is why HPL
supports the principle of a more effective chemicals regulatory system in order to
deliver sustainable health and environmental safety benefits.
In order to ensure that HPL is well prepared for REACH, a special cell is formed to
ensure compliance with and implementation of the regulation. HPL has pre-registered
all of the eligible substances that it exports to EU and registered the substances due
for the registration.
Substances registered are:
®
KINOX -10
®
KINOX - 76
®
KINOX - 68
®
KINOX - 30
®
MIKROFINE - ADC
®
MIKROFINE - OBSH
For more information regarding a specific product/s, please send your request to
vijay.nagpal@hpladditives.com
is the new European Chemicals regulation (EC No. 1907/2006) on Registration,
Evaluation, Authorisation and Restriction of Chemicals entered into force in June 2007.
The REACH regulation requires substances manufactured or imported into the European
Union, including substances in preparation in quantities over one metric ton per year,
to be registered unless exempted. The main aims of REACH are to improve the protection
of human health and the environment from the risks that can be posed by chemicals.
REACH makes industry responsible for assessing and managing the risks posed by
chemicals and providing appropriate safety information to their users.
REACHBeing a non-EU manufacturer
HPL has appointed an Only
Representative (OR) in the
European Union:
REACHLaw Oy,
POLARIS Business Park,
Vänrikinkuja 3 JK 21,
FI-02600 Espoo,
Finland
Tel.: 358-(0) 9-4123055
e-mail: info@reachlaw.fi
05
9. ®
MIKROFINE Chemical Blowing Agents
06
Proprietary Activated Core Grades Of Azodicarbonamide In Powder Form
22 3± For the production of X-linked polyolefinic and rubber foams
PVC shoe soles, EVA slippers, PE extrusion, LDPE rotational moulding
and rubber foams
4 0.5±
230 5± 195 2±
230 5± 191 2±
Grade
MIKROFINE
Particle size
d 0.5 (microns)
Gas
(ml/gm) at STP
0
DT( C) Applications
20 3± For the production of low density X-linked polyolefinic foams225 5± 198 3±
11 1± Rigid PVC foamed sheets and pipes230 5± 191 2±
7 0.5±
5 0.5± Thicker artificial foamd PVC leather cloth (4 mm and above)230 5± 191 2±
Thicker artificial foamd PVC leather cloth (4 mm and above)230 5± 191 2±
2A22SS
ADC-3202M
ADC-H5
ADC-L5
ADC-F5
ADC-F3
22 3± For the expansion of chemically and physically X-linked extruded polyolefinic
foam for applications in thermo insulation and packing materials-eco friendly
replacements for polyurethane foams
230 5± 200 3±ADC-3222M
EXOTHERMIC CHEMICAL BLOWING AGENTS
Product & Chemical Name CAS No.
123-77-3
Chemical Structure
Azodicarbonamide
193 3± For low density cross-linked PE foams
22 3± 230 5± 200 3± For low density cross-linked PE foams
235 5± 200 3± For low density cross-linked PE foams
11 1± 235 5± 200 3± For production of foamed articles based on PVC/PP/HDPE/LDPE/ABS/rubber
235 5± 200 3± For injection moulded cross-linked EVA footwear in combination with
MIKROFINE A14D
7 0.5± 235 5± 200 3± PVC leather cloth by spread coating
5 0.5± 235 5± 200 3± PVC leather cloth by spread coating
For EPDM and Nitrile rubber pipe insulations and cellular plastics
7 0.5± 235 5± 200 3± Food grade chemical blowing agent used as an ageing, bleaching agent and
dough conditioner
Core Grades Of Azodicarbonamide In Powder Form
19 2±
10 0.5±
Grade
MIKROFINE
Particle size
d 0.5 (microns)
Gas
(ml/gm) at STP
0
DT( C) Applications
ADC-Z40 40 ± 2 230 5± 193 3± For low density cross-linked PE/PP foams
ADC-Z35 35 2± 230 5±
ADC-Z25
ADC-3202
5 0.5± 235 5± 200 3±
5 0.5± 235 5± 200 3± Artificial leather cloth and insulation products
4 0.5± 235 5± 200 3± Artificial leather cloth and insulation products
11 1±
ADC-H2
235 5± 200 3± For the expansion of chemically and physically X-linked polyolefinic sheets11.5 0.5±2A12SS
ADC-L2
ADC-F2
ADC-2A3M
ADC-3052M
ADC-F1
ADC-LFGD
235 5± 200 3± Food grade chemical blowing agent used as an ageing, bleaching agent and
dough conditioner
ADC-HFGD
235 5± 200 3± For production of foamed articles based on PVC/PP/HDPE/LDPE/ABS/
rubber, most suitable for PVC plastisol applications
9 0.5±AX9M
5A06
10. 07
191 3±
114 2±
155 5± 142 3±
8 0.5± 193 2±
182 3±
5.5 0.5±
Grade
MIKROFINE
Particle size
d 0.5 (microns)
Gas
(ml/gm) at STP
0
DT( C) Applications
ADC-130 5 ± 0.5 __ 130 2±
ADC-1300
ADC-RT 115
ADC-SE
ADC-3838
160 3±
For PP/HDPE extrusion and injection moulding. For gas assisted
injection moulding
PVC
ADC-21 For EPDM profiles with closed cell structure
ADC-RM1 For 2/3 layer LLDPE rotomoulded water tank
For 2/3 layer LLDPE rotomoulded water tank
For cross-linked injection molded EVA slippers, sandals in
with Mikrofine 5A06
combination
For production of X-linked injection moulded EVA slipper and sandals
For production of X-linked injection moulded EVA slipper and sandals
For production of foamed articles based on EVA co-polymers and
LDPE-rubber blends
Proprietary Modified Grades Of Azodicarbonamide In Powder Form
For low temperature plastisol applications like carpet back foams
__ For PVC injection moulding for increased density reduction
5 0.5± For textured wall finish__
One pack for leather cloth, ideal in chemically embossed foams
__
__
____
____
____ 176 3±
____ 142 3±
____
118 3±
____ 172 3±
__ 205 5± 182 3±
ADC-RM2
EXRP2
KS18
For injection molded X-linked EVA footwear
ADC-RT 125
FM
For textured wall finish5 0.5± __ 125 2±
ADC-VRNP 5 1± For Sn stabilized rigid PVC and sheetspipes/profiles__ 198 5±
SK3 For injection molded X-linked EVA footwear__ __ 185 3±
10 0.5± 235 ± 517A 200 3± For injection molded X-linked EVA footwear
17B __ __ 142 3±
7 0.5±
0
Useful in the processing temperature range of 150-175 C for foaming
rubber compounds particularly based on EPDM rubber
200 5± 156 3±
For artificial foamed PVC leather clothADC-F303 196 2±6 0.5± 235 ± 5
A14D
For production of PVC footwear, midsoles/ insoles, EVA copolymer
foamed PVC leather cloth
and____ 166 3±ADC-RE
7 0.5± For production of foamed articles based on rigid PVC pipes, profiles
sheets
and205 5± 190 2±HP360
5 0.5± For production of foamed articles based on rigid PVC pipes, profiles
sheets
and205 5± 189 3±HP 340
For the production of vinyl wall covering, floor covering and vinyl
cloth
leather5 0.5± __ 143 3±Z14A/
ND
Z14A
CT
HP754
__ 228 5± 191 2± For the production of light weight, cross-linked, extruded PE sheets in
combination with MIKROFINE ADC-1500
A15VM
__ 181 3±195 5± For the production of light weight, cross-linked, extruded PE sheets in
combination with MIKROFINE A15VM
ADC-1500
11. 08
Sulfonyl Hydrazides For Rubber And Other Applications
1576 35 8– – 108 2± — 110 5±
105–108 110 5±
(Base
Material)
Product
MIKROFINE TSH
p-Toluene sulfonyl hydrazide
Gas
(ml/gm)
at STP
CAS No. DT (°C) Particle size
d 0.5
(microns)
Chemical Structure
Chemical Name
&
MIKROFINE TSH ND —
80 51 3– – 153 ± 3 — 120 ± 5MIKROFINE OBSH
4,4’-Oxybis(benzenesulfonyl
hydrazide)
MIKROFINE OBSH-R 153 3± 12.0–14.0 120 5±
MIKROFINE OBSH ND 152 2± — 100 5±
MIKROFINE OBSH-M 300 153 3± 9.5-13.5 120 5±
MIKROFINE OBSH-M 150 153 3± 9.0-11.0 120 5±
MIKROFINE OBSH-F 155 3± 5.0-9.0 125 5±
MIKROFINE OBSH-NE 150 3± 7.0-11.0 105 5±
Semicarbazides For High Temperature Processing
10396–10-8 222 3± 5 7– 135 5±
Product Gas
(ml/gm)
at STP
CAS No. DT (°C) Particle size
d 0.5
(microns)
Chemical Structure
Chemical Name
&
MIKROFINE TSSC
p-Toluene sulfonyl
semicarbazide
For thermoplastic resins such as EVA co-polymers,
PE and 1,2-polybutadiene rubber
119 3±
Grade
MIKROFINE
Particle size
d 0.5 (microns)
Gas
(ml/gm) at STP
0
DT( C) Applications
Proprietary Cross Blends Of Blowing Agents In Powder Form
PT For thicker compression moulded EVA /LDPE foamed articles__ __
For cellular rubber products__ __
CHT
ADC-EV
For cellular products based on thermoplastic resins such as
EVA co-polymers, PE and 1,2-polybutadiene rubber118 3±
SSS-I/II/III
__ __
195 5±
__ __
118 3±
—
—
—
—
—
—
—
12. 09
Grade Particle size
d 0.5 (microns)
Gas
(ml/gm) at STP
0
DT( C) Applications
ENDOTHERMIC CHEMICAL BLOWING AGENTS
For foaming of thermoplastic resins by injection moulding and extrusion
For crown cork Roto-moulded productsliners, co-axial cables and
MIKROFINE106 — Starts from 140 For crown cork liners, co-axial cables and roto-moulded products
MIKROFINE1013 — Starts from 150
MIKROFINE1026
7 2±
7 2±
7 2± — > 180
For epoxy foams, rubber cloth laminates, sponge rubber and slipper soles
Non dusty version of MIKROFINE TSH
Activator for azodicarbonamide thus helping production of foamed articles at lower temperature
For thick section PVC foams and low temperature processing of silicone rubber
For Injection moulded PS, PPO, HIPS, ABS, PP, HDPE and rigid PVC
For Co-axial cables, EPDM profiles, light colour PVC footwear, and micro-cellular rubbers
ApplicationsProduct Name
MIKROFINE TSH
MIKROFINE TSH ND
MIKROFINE ZBS
POLYAZO AZDN (FF)
MIKROFINE TSSC
For Co-axial cables, EPDM profiles, light colour PVC footwear, and micro-cellular rubbers
Non dusty version of MIKROFINE OBSH
EPDM profile, PVC plastisol applications
Light colour PVC application; micro cellular applications which require viscosity control
Synthetic/natural rubber, rotational moulding of LLDPE
Non explosive variant of OBSH
MIKROFINE OBSH - R
MIKROFINE OBSH
MIKROFINE OBSH - ND
MIKROFINE OBSH - M 300
MIKROFINE OBSH - M 150
MIKROFINE OBSH - F
MIKROFINE OBSH - NE
218 3± —
Product &
Chemical Name
Gas
(ml/gm)
at STP
CAS No. DT (°C) Particle size
d 0.5
(microns)
Chemical Structure
MIKROFINE ZBS
Zinc (dibenzene sulfinate)
dihydrate
—24308-84-7
Activator
’2,2 -Azobis (isobutyronitrile)
Product &
Chemical Name
Gas
(ml/gm)
at STP
CAS No. DT (°C) Particle size
d 0.5
(microns)
Chemical Structure
POLYAZO AZDN (FF)
2,2’-Azobis(isobutyronitrile)
78–67–1 101 2± — 125 5±
13. 10
Curing agent for epoxy heat curable resins, suitable for encapsulating electronic components
Chain extender and cross-linking agent
Stabiliser for fibre grade synthetic resin
ApplicationsProduct Name
HICHEM ADH
®
HICHEM Hydrazine Derivative
STEPHEN R.COVEY
“Every human has four endowments-
self awareness, conscience, independent will and creative imagination.
These give us the ultimate human freedom...
the power to choose, to respond, to change.”
CHAIN EXTENDER AND CROSSLINKING AGENT
1071-93-8 174 180-83
Product &
Chemical Name
CAS No. Chemical Structure
HICHEM ADH
Adipic dihydrazide
White
crystalline
powder
Physical
form
Mol. Wt.
g/mol
Melting
point
(°C)
Chemical blowing agent for PVC and TPE in the
temperature range of 160-170°C
processing
For rigid PVC profiles, board and foamed sheets
For rigid PVC profiles, board and foamed sheets
Grade Particle size
d 0.5 (microns)
Gas
(ml/gm) at STP
0
DT( C) Applications
ENDEX CHEMICAL BLOWING AGENTS
— Starts from
150
—
MIKROFINE
5145 / 50
—
—
— > 140
> 140—
To be used in combination with MIKROFINE 5145MIKROFINE
HP 1028
—— 196 2±
MIKROFINE
7500
—— > 140 To be used in combination with MIKROFINE 5145 and MIKROFINE
5200 for the above applications
MIKROFINE
5200
MIKROFINE
5145
14. 11
®
POLYAZO Polymerization Catalysts
2997-92-4
27776-21-2
White to
off-white
WATER SOLUBLE
White to
off-white
163-67
(with dec.)
187-191
271
Product &
Chemical Name
Melting
point
CAS No. Physical
form
Mol. Wt.
g/mol
Chemical Structure
powder
(°C)
323
powder
POLYAZO AZIM
2,2’-Azobis [2-(2- imidazolin-2-yl)
propane] dihydrochloride
POLYAZO AZPH
2,2’-Azobis (2- amidinopropane)
dihydrochloride
78-67-1 Crystalline
white
SOLVENT SOLUBLE
101-103
(with dec.)
164
Product &
Chemical Name
CAS No. Physical
form
Mol. Wt.
g/mol
Chemical Structure
powder
Melting
point
(°C)
POLYAZO AZDN (FF/CP/CRP)
2,2’-Azobis(isobutyronitrile)
For polymerisation of acrylamide, acrylonitrile and acrylic acid with high molecular
weight and with minimum branching.
For polymerisation of acrylamide, acrylonitrile and acrylic acid. It finds use in polymers
meant for use as flocculants.
Applications
POLYAZO AZPH
POLYAZO AZIM
Product Name
POLYAZO AZDN (FF/CP/CRP) For the polymerisation of styrene, MMA, HEMA, BMA and vinyl acetate. Also for the
co-polymerisation of ethylene-vinyl acetate and ethylene-divinyl benzene. Source of
free radicals for selective halogenation.
15. 12
®
KINOX Antioxidants
PHENOLICS
6683-19-8 110-125White to
slightly
yellowish
powder /
granules
310 1%
355 10%
1178
Product &
Chemical Name
Melting
point
CAS No. Physical
form
Mol. Wt.
g/mol
Chemical Structure
(°C)
TGA
KINOX-10
Pentaerythrityl tetrakis[3-
(3,5-di- butyl-4-tert.
hydroxyphenyl)propionate]
2082-79-3 531 50-55KINOX-76
Octadecyl-3-
(3,5-di- butyl-4-tert.
hydroxyphenyl)propionate
1709-70-2 775 240-245
White
powder/
granules
230 1%
290 10%
KINOX-30
1,3,5-Trimethyl-
2,4,6-tris(3,5-di-tert.butyl-
4-hydroxybenzyl) benzene
27676-62-6 784 218-223
290 1%
340 10%
White
crystalline
powder /
granules
KINOX-34
1,3,5-Tris(3,5-di-tert.
butyl-4-hydroxybenzyl)-
1,3,5-triazine-2,4,6-
(1H,3H,5H)-trione
280 1%
330 10%
White
crystalline
powder /
granules
(°C, % mass loss)
16. 13
PHENOLICS
Product &
Chemical Name
Melting
point
CAS No. Physical
form
Mol. Wt.
g/mol
Chemical Structure
(°C)
TGA
(°C, % mass loss)
96-69-5 White
crystalline
powder
358.5 158-164
23128-74-7 White to
off-white
crystalline
powder /
granules
637 156-161
White
powder
358.5 81-86
36411-52-6 White to
off-white
powder
—
KINOX-98
N,N'-Hexamethylene-bis
[3-(3,5-di-tert.butyl-4-
hydroxyphenyl)
propionamide]
90-66-4
204 315 min.
KINOX-6
4,4'-Thiobis
(5-methyl-2-
tert.butylphenol)
280 1%
340 10%
214 5%
227 10%
KINOX-9
2,2'-Thiobis(4-methyl-6-
tert.butylphenol)
186 5%
199 10%
KINOX-DA
3-Salicyloylamino-
1,2-4-triazole-
31570-04-4
PHOSPHITE
Product &
Chemical Name
Melting
point
CAS No. Physical
form
Mol. Wt.
g/mol
Chemical Structure
(°C)
TGA
(°C, % mass loss)
647 180-187 230 1%
260 10%
KINOX-68
Tris(2,4-di-tert.butylphenyl)
phosphite
White,
free
flowing
crystalline
powder/
granules
METAL DEACTIVATOR
32687-78-8 White to
slightly
yellowish
crystalline
powder /
granules
224-230
Product &
Chemical Name
Melting
point
CAS No. Physical
form
Mol. Wt.
g/mol
Chemical Structure
(°C)
TGA
(°C, % mass loss)
552 240 1%
280 10%
Benzene propanoic acid,
3,5-bis(1,1-dimethylethyl)-
4-hydroxy-2-[3-{3,5-bis(1,1
-dimethylethyl)-4-hydroxy
phenyl}-1-oxopropyl]-
hydrazide
KINOX-24
®
KINOX Antioxidants
17. Long term stabiliser for polyolefins, olefinic copolymer, polyacetal, polyamide and
synthetic adhesives
Nylon, PU & engineering plastics like polyacetal
HDPE and LDPE for tubes, water and gas pipes, connectors, high voltage cables and
greenhouse films. Also used as a polymerisation and processing stabiliser for - PP,
ABS, PVC, EPDM and polybutadienes
Thermal stabiliser for cross-linked polyethylene wire and cable
Copper deactivator for polyolefins insulation
ApplicationsProduct Name
KINOX-10
Basic stabiliser for polyethylene, styrenics and copolymer, PVC, EPDM, synthetic adhesives
Stabiliser for polypropylene film and tape application requiring low water carry over
KINOX-76
KINOX-30
PHENOLICS
KINOX-98
KINOX-6
KINOX-9
KINOX-DA
PHOSPHITE
METAL DEACTIVATOR
KINOX-24 Stabiliser for polyolefins specially in copper cable applications
KINOX-68 For good processing stability
CompositionProduct Name
BINARY BLENDS
33% of KINOX-10 and 67% of KINOX-68
25% of KINOX-10 and 75% of KINOX-68
20% of KINOX-10 and 80% of KINOX-68
50% of KINOX-76 and 50% of KINOX-68
33% of KINOX-76 and 67% of KINOX-68
20% of KINOX-76 and 80% of KINOX-68
10% of KINOX-76 and 90% of KINOX-68
50% of KINOX-30 and 50% of KINOX-68
33% of KINOX-30 and 67% of KINOX-68
50% of KINOX-34 and 50% of KINOX-68
33% of KINOX-34 and 67% of KINOX-68
50% of KINOX-10 and 50% of KINOX-24
50% of KINOX-98 and 50% of KINOX-68
50% of KINOX-10 and 50% of KINOX-68
KINOX-B15
KINOX-B25
KINOX-B20
KINOX-B61
KINOX-B11
KINOX-B12
KINOX-B14
KINOX-B19
KINOX-B31
KINOX-B32
KINOX-B41
KINOX-B42
KINOX-B124
KINOX-B88
For long term stabilisation of polypropylene fibre, molding grades and mineral/glass
filled systems
KINOX-34
14
18. ApplicationsProduct Name
When good balance between processing and long term heat stability is required
KINOX-B25 When long term heat stability is the main consideration
For improved processing stability of PP, HDPE
For superior processing stability of PP, HDPE, LLDPE
Balance of long term thermal & processing stability of HDPE, LLDPE
For good balance of long term thermal & processing stability of HDPE, LLDPE
For superior processing stability of HDPE, LLDPE
For most superior processing stability of HDPE, LLDPE
For long term thermal stability of PP - mainly films and tapes
For good balance of long term thermal & processing stability of PP -mainly films and tapes
Filled PP and PP fibre
For processing stability of filled PP and PP fibre
For long term thermal stability and insulation of PL cables
For processing stability and long term ageing of polyamides
KINOX-B20
KINOX-B61
KINOX-B11
KINOX-B12
KINOX-B14
KINOX-B19
KINOX-B31
KINOX-B32
KINOX-B41
KINOX-B42
KINOX-B124
KINOX-B88
KINOX-B15
BINARY BLENDS
15
19. ®
HILITE Light Stabiliser
ApplicationsProduct Name
HITEX-OB
OPTICAL BRIGHTENERS
HITEX-OB1 Especially polyester and polyamide fibres as well as polycarbonates, acrylics, styrene-homo
and copolymers including ABS, polyolefins and EVA
Particularly useful for engineering plastics including polyesters, polycarbonates, polyamides
and acrylics, thermoplastic polyurethanes, PVC, polystyrene and copolymers, polyolefins,
adhesives and many other organic substrates
®
HITEX Optical Brighteners
300 0.2%
350 2%
7128-64-5 Greenish -
yellow
powder
430.6 196-202
1533-45-5 Yellowish
crystalline
powder
414.4 354-364
Product &
Chemical Name
Melting
point
CAS No. Physical
form
Mol. Wt.
g/mol
Chemical Structure
(°C)
TGA
(°C, % mass loss)
HITEX-OB
2,5-Thiophenediyl-bis-
(5-tert.butyl-1,3-
benzoxazole)
280 1%
310 2%
HITEX-OB1
4,4'-Bis(benzoxazol-2-yl)
stilbene
HINDERED AMINE LIGHT STABILISER
80-86White to
off-white
powder/
granules
52829-07-9
Product &
Chemical Name
Melting
point
CAS No. Physical
form
Mol. Wt.
g/mol
Chemical Structure
(°C)
TGA
(°C, % mass loss)
481HILITE-77
Bis(2,2,6,6-tetramethyl-4-
piperidyl) sebacate
200 1%
260 10%
Useful for polymers like PP, PE, HDPE & ABS. Also used in coatings, adhesives & rubber
ApplicationsProduct Name
HILITE-77
HALS
16
20. 17
KINOX-01L provides superior thermal stability over conventional antioxidants. Permits
reduced antioxidant losses under high temperature operating conditions.KINOX-01L exhibits
good resistance to discoloration to synthetic lubricants & waxes.
ApplicationsProduct Name
KINOX-01L
KINOX-07L provides superior thermal stability over conventional antioxidants. Permits
reduced antioxidant losses under high temperature operating conditions. KINOX-07L
demonstrates good deposit control performance in engine oils.
KINOX-07L
®
KINOX Antioxidants For Lubricants
50-55White
powder
2082-79-3 531KINOX-07L
Octadecyl-3-
(3,5-di-tert.butyl-4-
hydroxyphenyl)
propionate
230 1%
290 10%
Product &
Chemical Name
Melting
point
CAS No. Physical
form
Mol. Wt.
g/mol
Chemical Structure
(°C)
TGA
(°C, % mass loss)
110-125White to
slightly
yellowish
powder
6683-19-8 1178KINOX-01L
Pentaerythritol tetrakis
[3-(3,5-di-tert-butyl-4-
hydroxyphenyl)propionate]
310 1%
355 10%
HICLEAR Clarifying Agent
®
Is a high performance sorbitol based clarifying agent for PP. Particularly useful for
polypropylene applications for food packaging , medical syringes, and high-clarity household
and cosmetic containers. It also improves surface smoothness of polypropylene.
ApplicationsProduct Name
HICLEAR-301
135861-
56-2
250white
powder
Product &
Chemical Name
Melting
point
CAS No. Physical
form
Mol. Wt.
g/mol
Chemical Structure
(°C)
TGA
(°C, % mass loss)
414 200 1%
290 10%
HICLEAR-301
1,3:2,4 Bis
(3,4-dimethylbenzylidene)
sorbitol
min.
21. HPL Additives Limited
AN ISO 9001 • ISO 14001 • OHSAS 18001 COMPANY
Manufacturing
Sites
Site1
Plot No. 6-8, Sector- 25,
Ballabgarh, Faridabad-121004
Haryana, India
Site2
Village Dudhaula,
Prithla- Dhatir Road,
Palwal - 121102,
Haryana, India
Site3
Derabassi – Barwala Road
Village Bhagwanpur , Derabassi
District S.A.S Nagar, Mohali -140507
Punjab, India
Site4
Plot No.72, Sector- 25,
Ballabgarh, Faridabad-121004
Haryana, India
international
offices
HPL USA
HPL Additives, Inc.
21, Sagamore Lane, Dix Hills,
NY 11746, USA
Tel: +1 631 643 5714
Mobile: +1 516 884 7095
e-mail: amar.singh@hpladditives.com
HPL China
HPL Additives (China)
RM 403, Block 26, Diecuiyuan,
HuaNan Country Garden
Panyu District 511442
Guangzhou City, Guangdong, China
Mobile: +86 135 014 76339
e-mail: china@hpladditives.com
HPL Additives Limited
5th Floor, Block A, Vatika Mindscapes,
12/3, Main Mathura Road,
Faridabad – 121003. Haryana, India
Tel : +91 129-2251300
Fax : +91 129-2251304/05
e-mail: hpla@hpladditives.com
Website: www.hpladditives.com
Corporate
Headquarter
22. MEXICO
Macropol S.A. de C.V
Camino A Lago De Guadalupe # 74
Col # San Miguel Xochimanga
C.P. 52927 Mexico
Tel: +5525 1083 5822
E-mail: comprasmacro@macropol.com.mx
COLOMBIA
Scalpel Ltda,
Carrera 27 No 74A-16
Bogota D.C. - Colombia
Tel: + 571 240 4320
E-mail: rsanchez@scalpel.com.co
Europe
AMERICAS
NORTH AMERICA
Harwick Standard Distribution Corporation
60 South Seiberling Street
Akron, OHIO 44305, USA
Tel: +1 330/798-9300 , Fax: +1 330/798-9328
BLOWING AGENTS
BLOWING AGENTS & ANTIOXIDANTS
PAN EUROPEAN
Innochem N.V.
B. Adriaensenlaan 66
PO BOX 39, B-2450 Meerhout, Belgium
Tel: +32 14 369087
E-mail: innochem@innochem.be
jan.smeets@innochem.be
geert.de.ridder@innochem.be
CHAIN EXTENDERS AND
CROSS LINKING AGENTS
PAN EUROPEAN
Synazo e.k.
Fürther Strasse 42 A
D - 90429 Nürnberg, Germany
Tel: + 49 911 52 85 11 62
E-mail: info@synazo.biz
AZO-INITIATORS
GERMANY
HR-Chemservice GmbH
Pressburger Strasse 67
81377 Munich, Germany
Tel: +49 8972 49 36 55
e-mail: rhobohm@t-online.de
GERMANY
European Additives GmbH
Rodderweg 44, 50999 Köln, Germany
Tel.: +49 (0) 2236 59 92 39
E-mail: j.wittler@european-additives.com
BENELUX
Safic Alcan Benelux
Neringstraat 11 - 1840 Londerzeel – Belgium
Tel : 0032 (0)52 30 36 42
Fax : 0032 (0)52 30 93 27 -
E-mail :
Emmanuel.WOESTELANDT@safic-alcan.be
BENELUX
Advanced Plastics Benelux BV
Jupiterweg 41A
3893GC Zeewolde, The Netherlands
Tel.: +31 36 530 9060
E-mail: r.vanesch@advancedplastics.nl
ANTIOXIDANTS
GERMANY
NGS Elastomer GmbH
Rosenweg 7
23898 Sandesneben Germany
Tel/Fax: +49 4536 89 99 92 / 98
E-mail: k.holst@ngs-elastomer.de
BLOWING AGENTS
Distribution and KAM Network
23. ( The above is the current network at the time of printing of this document and could change without any prior notice.)
FRANCE
Safic Alcan
3 Rue Bellini, 92806 PUTEAUX
Tel. :+ 33 1 46 92 64 64
Fax : + 33 1 46 67 04 42
Email: claire.charlot@safic-alcan.fr
ITALY
Azelis Italia
Via Leonardo Da Vinci, 43
20090 Trezzano S/N Milan, Italy,
Tel: +39 02 4847 239
E-mail: marco.gerosa@azelis.it
POLAND
Safic-Alcan Polska
Ul. Bokserska 66, 02-690 Warszawa; Poland
Tel: +48 22 375 17 10
Fax: +48 22 375 17 13
Email: anna.sobczak@safic-alcan.pl
Email: Karolina.gdyk@safic-alcan.pl
ROMANIA
Safic Alcan Romania,
Bdul.regina Maria No. 32, Sector 4,
040125 , Bucharest , Romania
Tel. : +40-374-089-724
Fax : + 40- 21-405-13-02
Email: roberta.ilie@safic-alcan.ro
AUSTRIA & SWITZERLAND
Safic-Alcan Deutschland GmbH
Wolfsheimer Straße 1
55543 Bad Kreuznach
Tel: +49 (0) 671 79 46 13 25
Fax: +49 (0) 671 48 34 524
E-mail: torsten.heller@safic-alcan.de
BLOWING AGENTS & ANTIOXIDANTS SPAIN
Safic Alcan
C/Rocafort, 241 08029
Barcelona, Spain
Tel.: 933220453 Fax.- 934106978
E-mail: nheras@safic-alcan.es
TURKEY
Azelis TR
Giz 2000 Plaza K:13 D:49-50 Maslak
34398 Istanbul, Turkey
Tel :+902122906680
E-mail: zeynep.balaban@azelis.com.tr
U.K
Safic-Alcan UK Limited
812 Fountain Court, Birchwood Boulevard
Warrington, Cheshire, WA3 7QZ
United Kingdom
Tel.: +44 (0) 1925 848135
Fax : +44 (0) 1925 848119
Email : graham.heyes@safic-alcan.co.uk
MiddleEast
Taurus Comtrade Fzco
PO Box 262643,
JAFZ Dubai, United Arab Emirates
Tel.: +971 50 456 7422
Email: :tauruscomtrade.jafza@gmail.com
ANTIOXIDANTS
24. The information given in this document is only a recommendation, believed to be
reliable and is given in good faith but without warranty. Our advice does not release
users from the obligation of checking its validity. The user should test the product
to ascertain the suitability for the intended use. These properties or the whole
document is subject to change without any prior notice, at our sole discretion. We
are under no obligation to recall earlier issued documents.
HPLA/MKT/BROC/CP/00Z:0709/13
