DSD-NL 2014 - Geo Klantendag - 5. NGGS - MPM - Large deformations and soil-wa...Deltares
The document discusses the material point method (MPM) for modeling large soil deformations and soil-water interaction. MPM is presented as an advancement over FEM by allowing for large deformations without mesh distortion. It works by tracking the state variables of material through Lagrangian points that move through a fixed Eulerian mesh. Examples are given of MPM simulations of slope failures, pile installation, and soil-water problems that match well with experiments. MPM is proposed as a promising tool for further developing coupled analysis of soil, water, and structures.
DSD-NL 2014 - EU Data Landscape - 1. emo dnet jercio june 2014Deltares
The European Marine Observation and Data Network (EMODnet) aims to unlock fragmented marine data across Europe by making it freely accessible and interoperable. EMODnet brings together over 110 organizations to assemble marine data, metadata, and data products from diverse sources in a uniform way. The network produces data products of common interest like map layers and quality indicators to stimulate innovation, improve marine planning, and reduce uncertainty about sea conditions.
DSD-NL 2014 - iMOD Symposium - 9. iPEST - iMOD parameter estimation, Peter Ve...Deltares
iPEST is a software package that performs automated parameter estimation of groundwater models. It works by minimizing the summed differences between measured and calculated values, such as groundwater levels and flows, by adjusting model parameters such as hydraulic conductivities and storage coefficients. It uses the Levenberg-Marquardt method to minimize the objective function through successive iterations, using gradient-based and Gauss-Newton approaches to guide the parameter adjustments toward the minimum summed difference. The document provides details on iPEST's parameter estimation methodology and capabilities.
DSD-NL 2014 - Geo Klantendag - 5. NGGS - MPM - Large deformations and soil-wa...Deltares
The document discusses the material point method (MPM) for modeling large soil deformations and soil-water interaction. MPM is presented as an advancement over FEM by allowing for large deformations without mesh distortion. It works by tracking the state variables of material through Lagrangian points that move through a fixed Eulerian mesh. Examples are given of MPM simulations of slope failures, pile installation, and soil-water problems that match well with experiments. MPM is proposed as a promising tool for further developing coupled analysis of soil, water, and structures.
DSD-NL 2014 - EU Data Landscape - 1. emo dnet jercio june 2014Deltares
The European Marine Observation and Data Network (EMODnet) aims to unlock fragmented marine data across Europe by making it freely accessible and interoperable. EMODnet brings together over 110 organizations to assemble marine data, metadata, and data products from diverse sources in a uniform way. The network produces data products of common interest like map layers and quality indicators to stimulate innovation, improve marine planning, and reduce uncertainty about sea conditions.
DSD-NL 2014 - iMOD Symposium - 9. iPEST - iMOD parameter estimation, Peter Ve...Deltares
iPEST is a software package that performs automated parameter estimation of groundwater models. It works by minimizing the summed differences between measured and calculated values, such as groundwater levels and flows, by adjusting model parameters such as hydraulic conductivities and storage coefficients. It uses the Levenberg-Marquardt method to minimize the objective function through successive iterations, using gradient-based and Gauss-Newton approaches to guide the parameter adjustments toward the minimum summed difference. The document provides details on iPEST's parameter estimation methodology and capabilities.
DSD-NL 2014 - NGHS SOBEK 3 - Introductie SOBEK 3 voor de Nederlandse watersec...Deltares
This document summarizes the new features and capabilities of SOBEK 3.2, an integrated water modeling software package from Deltares.
The key updates in SOBEK 3.2 include improved modules for 1D hydrodynamic modeling (D-Flow 1D), real-time control (D-Real Time Control), rainfall-runoff modeling (D-Rainfall Runoff), and water quality modeling (D-Water Quality). The document outlines test cases that demonstrate these new modules.
Support and training services are also available from Deltares to assist users in obtaining, setting up, and applying the new version of SOBEK for their modeling needs.
The document discusses applying next generation modeling techniques to the Venice Lagoon using D-Flow Flexible Mesh (FM) and DELWAQ models. It summarizes the setup of new D-Flow FM and DELWAQ models of the lagoon, running test simulations, and comparing results to measurements and existing 3D-Flow models. Performance improvements were found with the new models allowing longer term simulations.
The document discusses the development of a Meteo Dashboard decision support system for planning offshore wind farm operations and maintenance. It includes forecasts of waves, currents and water levels from a hydrodynamic model. The dashboard collects and presents measured and forecasted meteorological and hydrodynamic data to support decision making. It has been piloted for RWE's offshore wind farms and includes databases, interfaces for measurements, forecasts from models, and tools to determine weather windows and validate data. The system integrates forecasts from hydraulic models with real-time and historical measurement data from met masts and buoys to provide visualized support for maintenance planning.
TYPO3 Congres 2012 - Aan de slag met TYPO3 Extbase en FluidTYPO3 Nederland
Met de lancering van de nieuwste TYPO3 CMS versies wordt het belang van werken met Extbase en Fluid steeds groter. Wanneer je nog extensies ontwikkelt op basis van pi_base of je wilt graag extensies gaan ontwikkelen maar je vindt de drempel is hoog, in deze sessie leer je de basics van een extase / fluid extensie en zie je hoe eenvoudig het is om extensies te ontwikkelen.
Henjo Hoeksma
Na enkele jaren als hobby met TYPO3 gewerkt te hebben, heeft Henjo zijn beroep gemaakt van het ontwikkelen van websites en webapplicaties op basis van het TYPO3 framework. Na een korte periode gewerkt te hebben als ontwikkelaar bij alterNET en een internationaal bedrijf in LED verlichting is hij als freelancer aan de slag gegaan.
Met een passie voor nieuwe technieken, kwalitatieve oplossingen & code en de TYPO3 producten & community ondersteunt hij vanuit zijn bedrijf Stylence zowel grote als minder grote organisaties in de ontwikkeling van websites en maatwerk oplossingen.
DSD-NL 2014 - NGHS SOBEK 3 - Introductie SOBEK 3 voor de Nederlandse watersec...Deltares
This document summarizes the new features and capabilities of SOBEK 3.2, an integrated water modeling software package from Deltares.
The key updates in SOBEK 3.2 include improved modules for 1D hydrodynamic modeling (D-Flow 1D), real-time control (D-Real Time Control), rainfall-runoff modeling (D-Rainfall Runoff), and water quality modeling (D-Water Quality). The document outlines test cases that demonstrate these new modules.
Support and training services are also available from Deltares to assist users in obtaining, setting up, and applying the new version of SOBEK for their modeling needs.
The document discusses applying next generation modeling techniques to the Venice Lagoon using D-Flow Flexible Mesh (FM) and DELWAQ models. It summarizes the setup of new D-Flow FM and DELWAQ models of the lagoon, running test simulations, and comparing results to measurements and existing 3D-Flow models. Performance improvements were found with the new models allowing longer term simulations.
The document discusses the development of a Meteo Dashboard decision support system for planning offshore wind farm operations and maintenance. It includes forecasts of waves, currents and water levels from a hydrodynamic model. The dashboard collects and presents measured and forecasted meteorological and hydrodynamic data to support decision making. It has been piloted for RWE's offshore wind farms and includes databases, interfaces for measurements, forecasts from models, and tools to determine weather windows and validate data. The system integrates forecasts from hydraulic models with real-time and historical measurement data from met masts and buoys to provide visualized support for maintenance planning.
TYPO3 Congres 2012 - Aan de slag met TYPO3 Extbase en FluidTYPO3 Nederland
Met de lancering van de nieuwste TYPO3 CMS versies wordt het belang van werken met Extbase en Fluid steeds groter. Wanneer je nog extensies ontwikkelt op basis van pi_base of je wilt graag extensies gaan ontwikkelen maar je vindt de drempel is hoog, in deze sessie leer je de basics van een extase / fluid extensie en zie je hoe eenvoudig het is om extensies te ontwikkelen.
Henjo Hoeksma
Na enkele jaren als hobby met TYPO3 gewerkt te hebben, heeft Henjo zijn beroep gemaakt van het ontwikkelen van websites en webapplicaties op basis van het TYPO3 framework. Na een korte periode gewerkt te hebben als ontwikkelaar bij alterNET en een internationaal bedrijf in LED verlichting is hij als freelancer aan de slag gegaan.
Met een passie voor nieuwe technieken, kwalitatieve oplossingen & code en de TYPO3 producten & community ondersteunt hij vanuit zijn bedrijf Stylence zowel grote als minder grote organisaties in de ontwikkeling van websites en maatwerk oplossingen.
SUNECO GOVERNANCE MODEL
Het Suneco Governance Model is de oplossing voor organisaties met meerdere websites op hun Sitecore systeem. Een platform met een website is eenvoudig beheersbaar, maar zodra er meer(dere) sites op het platform komen zal de beheersbaarheid evenredig afnemen. En veel bedrijven staan er niet bij stil dat de verschillende Sitecore partners allemaal hun eigen manier van werken hebben. Deze complexe situatie is niet erg zolang de status quo bestaat, maar deze bestaat in de huidige website lifecycle nooit lang. En als die status quo wordt aangetast wordt de complexiteit pas echt duidelijk. Het Suneco Governance Model ondersteunt bedrijven die op hun Sitecore instantie meerdere websites hebben draaien.
Meer op http://www.suneco.nl/governance
DSD-NL 2019 WAQUA-productieberekeningen en sommengenerator bij het SSC-Campus...Deltares
Presentatie door Koen Overmars, RWS-WVL, op de Simona Gebruikersmiddag, tijdens de Deltares Software Dagen - Editie 2019. Donderdag, 20 juni 2019, Delft.
DSD-NL 2023 Hoogwatertoetsingen met D-HYDRO Suite 1D2D - BoschDeltares
Presentatie door Siebe Bosch (Hydroconsult), op de D-HYDRO Gebruikersdag, tijdens de Deltares Software Dagen - Editie 2023. Woensdag, 7 juni 2023, Delft.
DSD-NL 2023 Hydraulisch Modelinstrumentarium Aa en Maas - de KeijzerDeltares
Presentatie door Steffie van Beek-de Keijzer (Waterschap Aa en Maas), op de D-HYDRO Gebruikersdag, tijdens de Deltares Software Dagen - Editie 2023. Woensdag, 7 juni 2023, Delft.
DSD-NL 2022 D-GEO Gebruikersdag - van der MeijDeltares
Presentatie door Raymond van der Meij (Deltares), op de D-GEO Gebruikersdag, tijdens de Deltares Software Dagen - Editie 2022. Woensdag, 29 juni 2022, Delft.
DSD-NL 2022 Keuzes - een workshop voor modelbouwers - Wesselius - MelsenDeltares
Presentatie door Carine Wesselius (Deltares) en Lieke Melsen (Wageningen Universiteit), op de D-HYDRO Gebruikersdag, tijdens de Deltares Software Dagen - Editie 2022. Woensdag, 22 juni 2022, Delft.
DSD-NL 2022 D-HYDRO modelgeneratie in Limburg - de Graaff2Deltares
Presentatie door Bertus de Graaff (HKV Lijn in Water), op de D-HYDRO Gebruikersdag, tijdens de Deltares Software Dagen - Editie 2022. Woensdag, 22 juni 2022, Delft.
DSD-NL 2022 Waterkwaliteitsmodellering met D-HYDRO Suite 1D2D - MeijersDeltares
Presentatie door Erwin Meijers (Deltares), op de D-HYDRO Gebruikersdag, tijdens de Deltares Software Dagen - Editie 2022. Woensdag, 22 juni 2022, Delft.
DSD-NL 2022 D-HYDRO Suite 1D2D, stand van zaken en vooruitblik - Verhoeven - ...Deltares
Presentatie door Edward Melger (Deltares), op de D-HYDRO Gebruikersdag, tijdens de Deltares Software Dagen - Editie 2022. Woensdag, 22 juni 2022, Delft.
DSD-NL 2022 Highlights van de zesde-generatie RWS modelschematisaties - SpruytDeltares
Presentatie door Aukje Spruyt (Deltares), op de D-HYDRO Gebruikersdag, tijdens de Deltares Software Dagen - Editie 2022. Woensdag, 22 juni 2022, Delft.
DSD-NL 2022 Proactief watermanagement systeem van Bangkok - HuttenDeltares
The document describes the development of a flood early warning system for Bangkok using 1D2D hydraulic models in D-HYDRO Suite. The models were built automatically using scripts and integrated into Delft-FEWS. The system runs forecasts every 3 hours for a 6 hour horizon. Challenges included the large size, rapid simulations needed, and limited data availability. Ongoing work includes improving the GIS database and implementing real-time control of flood gates.
DSD-NL 2022 Toetsing op wateroverlast voor de Barneveldse en Lunterse Beek - ...Deltares
The document summarizes a study assessing flood risk in the Barneveldse Beek and Lunterse Beek waterways for the Vallei en Veluwe water board. The study used the D-HYDRO model to simulate flood events, calibrating it using summer and winter storms in 2021-2022. The model was run automatically 55 times on 109 years of storm data to generate flood statistics. The results showed D-HYDRO is suitable for assessing these waterways according to Netherlands water management requirements, though some structures need updated dimensions. In conclusion, D-HYDRO provided a good automated tool for the assessment when used with Hydrologic's D-HyDAMO and Hydrolib software
DSD-NL 2022 Overstromingsberekeningen met D-HYDRO Suite 1D2D - de LangeDeltares
Presentatie door Robbert de Lange (Arcadis Nederland B.V.), op de D-HYDRO Gebruikersdag, tijdens de Deltares Software Dagen - Editie 2022. Woensdag, 22 juni 2022, Delft.
DSD-NL 2022 D-HYDRO modelgeneratie in Limburg - de GraaffDeltares
Presentatie door Bertus de Graaff (HKV Lijn in Water), op de D-HYDRO Gebruikersdag, tijdens de Deltares Software Dagen - Editie 2022. Woensdag, 22 juni 2022, Delft.
DSD-NL 2022 D-HYDRO Gebruikersdag - Programma - MelgerDeltares
This document contains the program for a D-HYDRO user day event focused on the theme of "City and Country". The program includes presentations on topics like D-HYDRO modeling in Limburg, flood calculations using D-HYDRO Suite 1D2D, and waterlogging assessments for streams in Barneveld. There will also be breakout sessions on tools for circular modeling, visualization tools for D-HYDRO results, water quality and sustainability, and a workshop for model builders on modeling choices. The event aims to bring together D-HYDRO users to share experiences and knowledge.
Presentatie door Geerten Horn (HKV Lijn in Water) en Frank Weerts (Waterschap Rivierenland), op de D-HYDRO Gebruikersdag, tijdens de Deltares Software Dagen - Editie 2021. Woensdag, 30 juni 2021, Delft.
DSD-NL 2021 D-HyDAMO import en verificatie met D-HYDRO SuiteDeltares
Presentatie door Siebe Bosch (Hydroconsult), Daniel Tollenaar (D2HYDRO) en Vincent de Looij (Waterschap Noorderzijlvest), op de D-HYDRO Gebruikersdag, tijdens de Deltares Software Dagen - Editie 2021. Woensdag, 30 juni 2021, Delft.
DSD-NL 2021 Toepassing (semi-)gedistribueerde hydrologie met D-HYDRO Suite - ...Deltares
Presentatie door Sam de Roover en Marcel Alderlieste (HydroLogic BV), op de D-HYDRO Gebruikersdag, tijdens de Deltares Software Dagen - Editie 2021. Woensdag, 30 juni 2021, Delft.
DSD-NL 2021 Omzetten boezemmodel WS Hunze en Aa’s van SOBEK 2 naar D-HYDRO Su...Deltares
Presentatie door Riekje Rusticus (SWECO), op de D-HYDRO Gebruikersdag, tijdens de Deltares Software Dagen - Editie 2021. Woensdag, 30 juni 2021, Delft.
DSD-NL 2021 Casus Stellendam Goeree-Overflakkee - Stigter, CosterDeltares
Presentatie door Lennard Stigter (Waterfeit Adviseurs bv) en Daniëlle Coster (Waterfeit Adviseurs bv / Hogeschool Zeeland), op de D-HYDRO Gebruikersdag, tijdens de Deltares Software Dagen - Editie 2021. Woensdag, 30 juni 2021, Delft.
DSD-NL 2021 Casus Leiderdorp - de Waard, VlaarDeltares
Presentatie door Johan de Waard (Wareco Ingenieurs) en Sander Vlaar (Hogeschool Inholland Alkmaar), op de D-HYDRO Gebruikersdag, tijdens de Deltares Software Dagen - Editie 2021. Woensdag, 30 juni 2021, Delft.
1. 24 June 2015
Python scripting binnen Delta Shell
David Rodríguez Aguilera
Hidde Elzinga
2. 24 June 2015
Doelen van deze workshop
• Waarom zou ik scripting willen gebruiken?
• Wat kan (beter) met scripting?
• Welke tools zijn tot mijn beschikking om te scripten?
• Waarom ben ik nog niet begonnen met scripting?
3. Hoe?
Inleiding:
• DS + Plugins
• Doel scripting (voordelen)
Wat kan je met scripting?
Hoe moeilijk is scripting en hoe kan je werk beter en
makkelijker met scripting?
Command line scripting
Overzicht workshopsoefeningen:
• Sobek 3
• Delft 3D Flexible Mesh
Scripting editor
Aan de slag…
24 June 2015
4. Delta Shell
24 June 2015
Stat
• SOBEK
• DFlow – FM
• WAVE
• MorphAn
• KRW– Verkenner
• Habitat
• XBeach
11. Waar kan je scripting voor gebruiken?
24 June 2015
Eenvoudige (echter zeer belangrijke!) terugkerende taken
Aanmaken van nieuwe complexe functionaliteiten
13. 24 June 2015
Scripten kan ook vanaf command line
Geen GUI commands
kunnen gedraaid worden
vanaf command line
14. • Within Delta Shell GUI by using the run script button,
with the advantage of having all Delta Shell plugin
functionality at your disposal (such as plot functionality)
• From console using the
DeltaShell.Console.exe --run-file=‘script.py’
command
• Within Delta Shell in interactive mode (start using
DeltaShell.Console.exe –i
command from console) useful for debugging your
script
Run/test your script!
6 November, 2013
15. • SOBEK model aanmaken:
• SOBEK 3 flow model aanmaken
• Takken importeren
• Dwarsprofielen importeren
• Bruggen importeren
• Laterale bronnen importeren
• Weirs importeren
• Achtergrondkaart zetten
• Randvoorwaarden en laterale bronnen aanpassen
• Ruwheid aanpassen
• Initiële voorwaarden zetten
• Ruimtelijke en tijdelijke discretisatie
Optie 1: SOBEK 3
24 June 2015
• SOBEK model aanmaken:
• SOBEK 2.1x model importeren
• SOBEK model runnen
• Meetgegevens importeren
• Resultaten inlezen
• Grafiek maken van
resultaten vs meetgegevens
• Grafieken bijwerken/verbeteren
• Objecten gebruiken bij
het ijken van een model
• Model geautomatiseerd ijken
• Grafiek met resultaten van het ijken
• Beste combinatie parameters bij het ijken
• Resultaten opslaan als data (spreadsheets) of
grafieken (plaatjes)
16. Optie 1: SOBEK 3
24 June 2015
2.12 model
importeren
IJking
Model vanaf nul
opzetten
IJking
2.12 model
importeren
Model vanaf
nul opzetten
Model draaien
Model wijzigen
Model draaien
Model wijzigen
Model draaien
Model wijzigen
Model draaien
Model wijzigen
spoor 1 spoor 2 spoor 3 spoor 4
NabewerkingNabewerkingNabewerkingNabewerking
17. • Delft3D Flexible Mesh model aanmaken
• Modelgrid aanmaken
• Batimetrie (uit server) ophalen en grid afknippen
• Observatiepunten en Randen toevoegen
• Randvoorwaarden (uit server) ophalen en toekennen
• Ruimtelijk gedistribueerde initiële voorwaarden en
modelparameters toekennen
• Model draaien
• Output inlezen en weergeven
Optie 2: Delft3D Flexible Mesh
24 June 2015
19. Let’s get it started... in here!
24 June 2015
OPTIE 2
OPTIE 1
Delft3D
Flexible Mesh
SOBEK 3
SOBEK 3
Delft3D
Flexible Mesh
WORKSHOP: -> search : DeltaShell.Gui.exe
https://publicwiki.deltares.nl/display/TOOLS/Scripting+tutorials
Autocomplete: CTRL + SPACE
Selectie draaien: CTRL + ENTER
Regio draaien: CTRL + SHIFT + ENTER
Lokale variabelen wissen / weergeven
Intypen is NIET draaien
Watches toevoegen
Code netjes gesorteerd met regio’s
Wij ontvangen HEEL GRAAG zo veel mogelijk FEEDBACK!!