3. DEEOVAN MOWATT
Projects
Skills
Exceptional Sketching And Rendering Skills
Proficient in the use of Photo-Shop, Sketch-Book-Pro
and Illustrator
Excellent Visual Model making Skills and Exposure to
Clay modeling.
Other Skills Include SolidWorks, Alias, Z-Sketch.
Profile
KARAKTAR
3-WHEELER
SPEED-FORM
About Me
I am an International Student from Jamaica currently enrolled in the Industrial Design Degree pro-
gram at Humber College. My passion for design started through my love for Formula 1 and who so could be
so functional yet so beautiful. I believe that great design isn’t just about beauty and form following function
but for following emotion, experience and after the product is no longer in use.
6. KARAKTAR
The objective for the chair project was to design a chair for a modern living environment, which was influenced by Scandinavian
Design. The twist was that the chair had to utilize no more than 10 fasteners and made from plywood and cord. Some consider-
ations for this project were, bending wood, designing the chair be flat packable, use a little material as possible, use as little adhesive
as possible.
The Karaktar is a Scandinavian style dining room chair. It is made from 1” thick boltic-burch plywood, Paper cord (twisted paper)
and 8 screws. Karaktar is also flat-packable.
7. KARAKTAR
The objective for the chair project was to design a
chair for a modern living environment, which was influenced by
Scandinavian Design. The twist was that the chair had to utilize no more
than 10 fasteners and made from plywood and cord. Some considerations for this
project were, bending wood, designing the chair be flat packable, use a little
material as possible, use as little adhesive as possible. The Karaaktar is a Scandina-
vian style dining room chair. It is made from 1” thick boltic-burch plywood, Paper
cord (twisted paper) and 8 screws. Karaktar is also flat-packable.
12. SPEED-FORM
The objective for this project was to design a form that appeared to be fast. The
form had to be aerodynamic in nature yet modern and its appearance
was to show a clear association with SPEED.
15. 3-WHEELER
The aim of this project was to design a 1+1
comunter vehicle for the year 2020 that utelized 3
wheels and took up 1/4 the space of a Ford F150. This project
was heavily focused on ergonomics being that the vehicle’s footprint
limit was so small. Considerations were also made for its power source/
sourses and driving system.
16. Much of the insperation behind the design of this vehicle came from organic shapes combind with strong sharp lines. My aim for the exterior of
the vehicle was to creat a form that appeared to sculpted by the air. To achieve this I incorporated very sharp creased lines that flowed gently
down the sides and around the car to give it an instincktively aerodynamic yet beautiful form.