DATA S60 C&W: Counting System with Built-in Load Cell
•
0 likes•267 views
The ground-breaking DATA S60 C&W combines counting and weighing in a single added-value solution when processing or packaging seeds in bulk. It is ideally suited for field crops such as Corn, Soybeans, Cotton, Beans, Sweet Corn and others that are sold by numbers of seeds but often handled according to TSW. HOW DOES IT WORK Seeds are poured/ directed into the DATA S60 C&W hopper. A sensor in the hopper automatically activates the seed counter, which starts vibrating. The counter stops when there are no seeds left in the machine. The counted seeds are weighed and the TSW is calculated. The TSW is displayed on the operator console and transmitted to the packing machine controller.
Report
Share
Report
Share
Download to read offline
Recommended
4. Catalogue Auto Weighing System
This document describes an automated bagging system for weighing and packaging materials. Some key points:
- It allows for highly accurate bagging of 300-400 bags per hour using only 3 laborers, reducing labor costs.
- The fully automated line integrates weighing, bagging, stitching and conveying materials directly to storage in one continuous process.
- It reduces wastage by precisely controlling the bagging process to minimize spillage and leakage.
- The controller allows for flexible settings of bag weight, recipes, timer parameters and calibration for different materials and conditions.
DATA count S-60 PLUS
DATA Count S -60 PLUS is primarily developed for seed manufacturers that need to quickly and accurately count huge quantities of seeds as small as 0.5 mm and up to 25 mm.
This counter is designed to count large quantities of seeds and is ideally suited for seed manufacturers, Breeder producers, seed traders and plant nurseries.
DATA Count S-60 PLUS is the new generation of bulk counters.
Integrative industrial s 260 brochure v-1.2013-spa-es
DATA's S-260 seed counter can integrate with existing packaging machines to upgrade seed processing. It replaces weight or volumetric filling systems with highly accurate seed counting, and can also be added to existing systems. The S-260 counter easily integrates via a simple protocol, creating a modern counting and packaging system. It rapidly counts seeds from 0.5 to 25 mm at speeds up to 15 bags of 1,000 tomato seeds per minute. The counter delivers nearly 100% accuracy, saves time and money over scale-based packaging, and controls stock through actual counts.
DATA count S25 PLUS new version
DATA Count S-25 PLUS is the new generation of bulk counters.
This Counter counts seeds with the sizes ranging between 0.5 mm and 18 mm quickly and accurately,
eliminates the imprecision of weighing solutions and saves you money.
S25 PLUS is designed to count large quantities of seeds. It is ideally suited for seed manufacturers, traders
and plant nurseries.
DATA Count S-25 PLUS
DATA Count S-25 PLUS is the new generation of bulk counters.
This Counter counts seeds with the sizes ranging between 0.5 mm and 18 mm quickly and accurately,
eliminates the imprecision of weighing solutions and saves you money.
S25 PLUS is designed to count large quantities of seeds. It is ideally suited for seed manufacturers, traders
and plant nurseries.
Data count s 460 industrial counting machine
The DATA S-460 counting machine can quickly and accurately count seeds from 0.5 to 25 mm in size. It is designed to count massive quantities of seeds for companies in the seed industry that package hundreds of millions of seed packages per season. The S-460 enables unprecedented counting speed while maintaining phenomenal accuracy, allowing users to pack seeds by preset numbers without losing production time.
Data count B 25 PLUS
DATA Count Bowl Feeder-25 PLUS is the new generation of bulk counting machines.
DATA B-25 Plus counts seeds and small object with the sizes ranging between 0.5 mm and 18 mm quickly and accurately, eliminates the imprecision of weighing solutions and saves you money.
B-25 PLUS is designed to count large quantities of objects.
Data count and Pack 260 flex
The DATA Count & Pack S-260 Flex contains a counting unit and a packaging system, combined in one revolutionary
solution which delivers unprecedented accuracy and speed.
The new & improved DATA Count & Pack S-260 Flex is integrated with Beckhoff’s new XTS linear transport system.
Beckhoff XTS system is a modular, energy efficient, fully integrated linear motor with power electronics & position
measurement in a single device and a mechanical guide rail. XTS enables individual unit transport with a continuous flow
of products.
Recommended
4. Catalogue Auto Weighing System
This document describes an automated bagging system for weighing and packaging materials. Some key points:
- It allows for highly accurate bagging of 300-400 bags per hour using only 3 laborers, reducing labor costs.
- The fully automated line integrates weighing, bagging, stitching and conveying materials directly to storage in one continuous process.
- It reduces wastage by precisely controlling the bagging process to minimize spillage and leakage.
- The controller allows for flexible settings of bag weight, recipes, timer parameters and calibration for different materials and conditions.
DATA count S-60 PLUS
DATA Count S -60 PLUS is primarily developed for seed manufacturers that need to quickly and accurately count huge quantities of seeds as small as 0.5 mm and up to 25 mm.
This counter is designed to count large quantities of seeds and is ideally suited for seed manufacturers, Breeder producers, seed traders and plant nurseries.
DATA Count S-60 PLUS is the new generation of bulk counters.
Integrative industrial s 260 brochure v-1.2013-spa-es
DATA's S-260 seed counter can integrate with existing packaging machines to upgrade seed processing. It replaces weight or volumetric filling systems with highly accurate seed counting, and can also be added to existing systems. The S-260 counter easily integrates via a simple protocol, creating a modern counting and packaging system. It rapidly counts seeds from 0.5 to 25 mm at speeds up to 15 bags of 1,000 tomato seeds per minute. The counter delivers nearly 100% accuracy, saves time and money over scale-based packaging, and controls stock through actual counts.
DATA count S25 PLUS new version
DATA Count S-25 PLUS is the new generation of bulk counters.
This Counter counts seeds with the sizes ranging between 0.5 mm and 18 mm quickly and accurately,
eliminates the imprecision of weighing solutions and saves you money.
S25 PLUS is designed to count large quantities of seeds. It is ideally suited for seed manufacturers, traders
and plant nurseries.
DATA Count S-25 PLUS
DATA Count S-25 PLUS is the new generation of bulk counters.
This Counter counts seeds with the sizes ranging between 0.5 mm and 18 mm quickly and accurately,
eliminates the imprecision of weighing solutions and saves you money.
S25 PLUS is designed to count large quantities of seeds. It is ideally suited for seed manufacturers, traders
and plant nurseries.
Data count s 460 industrial counting machine
The DATA S-460 counting machine can quickly and accurately count seeds from 0.5 to 25 mm in size. It is designed to count massive quantities of seeds for companies in the seed industry that package hundreds of millions of seed packages per season. The S-460 enables unprecedented counting speed while maintaining phenomenal accuracy, allowing users to pack seeds by preset numbers without losing production time.
Data count B 25 PLUS
DATA Count Bowl Feeder-25 PLUS is the new generation of bulk counting machines.
DATA B-25 Plus counts seeds and small object with the sizes ranging between 0.5 mm and 18 mm quickly and accurately, eliminates the imprecision of weighing solutions and saves you money.
B-25 PLUS is designed to count large quantities of objects.
Data count and Pack 260 flex
The DATA Count & Pack S-260 Flex contains a counting unit and a packaging system, combined in one revolutionary
solution which delivers unprecedented accuracy and speed.
The new & improved DATA Count & Pack S-260 Flex is integrated with Beckhoff’s new XTS linear transport system.
Beckhoff XTS system is a modular, energy efficient, fully integrated linear motor with power electronics & position
measurement in a single device and a mechanical guide rail. XTS enables individual unit transport with a continuous flow
of products.
Data Count & pack S 260
The document describes the DATA Count & Pack S-260, a fully automatic seed counting and packaging machine. It can count seeds from 1mm to 25mm in size and rapidly pack large quantities, such as 12 bags of 1,000 tomato seeds per minute. The machine delivers nearly 100% accurate counts while saving time and being more profitable than scale-based packaging. It has user-friendly controls and can be customized for different bag sizes.
STEPS INVOLVED IN AUTOMATED FEED MILL
The document describes the steps involved in automating a feed mill. It discusses the various control systems used like host computers, distributed control systems, industrial computers, and personal computer-based systems. It then provides details on the functions of these systems and how they control and monitor the different processes in the feed mill like batching, receiving, milling, mixing, pelletizing, cooling, and shipping. The automation improves operations by making them more accurate, efficient and helps detect any faults.
AUTOMATED FEED MILL.pptx
This document discusses the automation of feed mill processes through a programmable logic control system. It describes the main components of an automated feed mill including material receiving, grinding, mixing, pelletizing, cooling and bagging. The automation provides benefits like increased efficiency and consistency while reducing costs. However, automated systems also require technical skills for maintenance and come with higher initial and maintenance costs compared to manual systems.
Data Bulk Tablet Counting Machines ICU Series
The document describes the ICU Series bulk tablet counting machines from DATA Detection Technologies. The ICU 2-80 machine can count tablets at a rate of up to 90 bottles per minute with 100% counting accuracy. It has a vision-based counting system, broken tablet detection, and a small footprint. The machine dimensions are 1281mm x 604mm x 1853mm.
twist grain.pdf
Farmpoint Grain Moisture Meter For Farmers and Traders
The original Supertech moisture meter for grain and seeds
The Farmpoint moisture meter is the original Supertech product designed to measure the moisture level of grain and seeds. It provides essential assistance in the field when determining the best time for harvesting and is also used for regular moisture measurement during the drying process and in storage.
If grain is harvested wetter than necessary, the consequences are not only extra drying costs but also a significantly increased risk of quality loss and spoilage.
Quick and accurate moisture measurement
Handy, robust and easy to operate
Reliable results
Automatic temperature compensation
Automatic calculation of average value
High measuring range
Adjustment of calibrations
High quality – low price
Two year warranty
Designed and produced in Denmark
Thank you for allowing Accurate Weighing Scales (U) Ltd the privilege to serve you in advance.
For inquiries on deliveries contact us
Office +256 (0) 705 577 823, +256 (0) 775 259 917
Address: Wandegeya KCCA Market South Wing, 2nd Floor Room SSF 036
Email: weighingscales@countrywinggroup.com
Multi Head counting series
DATA's multi head seed counters use multiple detection systems to provide unparalleled counting rates at high accuracy levels through specialized counting software. The counters can replace or augment weight or volumetric packaging systems, integrating easily with existing packaging machines to create modern counting and packaging systems. DATA has installed over 50 multi head systems worldwide since 2010 to meet the needs of medium and large seed companies with high packaging demands.
View Online Catalogs Of Dairy Equipments | NETCO | www.milkanalyser.com
View Online Catalogs Of Dairy Equipments | NETCO | www.milkanalyser.comNETCO-New Dairy Engineering & Trading Company Pvt. Ltd.
Automatic Milk Collection & Testing Systems ,Dairy Consumables & Handling Accessories ,Laboratory Equipments ,Cream Separators ,Milk & Ghee Clarifier,Butter Churners & Accessories ,Packing & Sealing Machines ,Milk Pumps & Pasteurizers & Sterilizers ,Bulk Milk Cooling Systems ,Milk Chilling Units ,Cheese & Paneer Processing ,Mini Dairies , Milking Machines ,Khoa Machine ,Automatic Milk Vending Machines ,Weighing Scales For More Information Please Log On www.milkanalyser.comAutoration 3.0
The document describes the Autoration 3.0 system, a collaboration between Valmetal and Contrôle A-Tech Drummond. The system allows farms that cannot use belt feeders to regulate cow diets, lower costs, and improve management. It can manage up to 14 ingredients, recipes in various units, 20 unload groups, and wireless data transfer. The system aims to save time and labor while improving accuracy, inventory control, and data sharing with nutritionists. It provides detailed reports and remote access via free software. The Autoration 3.0 costs an average of $5,000 less than traditional systems and offers personalized automation.
Smartfarmingreview2 161130035655
This document provides an overview of smart farming techniques, including the purpose of smart farms to automate and optimize agriculture. It describes various sensors used in smart farming to measure soil moisture, temperature, and other variables. It also outlines the components used in a smart farming prototype, including an Arduino board, moisture sensor, pump, LCD display, and relay module. Finally, it discusses recent technologies applied to smart farming, such as precision agriculture robots and wireless sensor networks.
Smart farming using ARDUINO (Nirma University)
this is to giude those who wants to learnf about automation in the field of agriculture and green harvesting.
my presentation.pptx
This document discusses the automation of a sugar mill house. It begins with an introduction to mill house operations and the purpose of automation, which is to improve safety, prevent issues like jams, and optimize processes like maintaining consistent loads. It then describes the cane feeding and milling control strategies, including using variables frequency drives on motors. The system architecture uses a distributed control system with redundant components. Automation provides advantages like continuous feeding to reduce downtime, eliminating chokes, maintaining optimal mill speeds and loads, and reducing wear while increasing capacity and extraction efficiency.
Process Selection and Facility layout.ppt
This document discusses operations management processes including process selection, facility layout, and line balancing. There are five basic process types - job shop, batch, repetitive, continuous, and project - determined by required volume and variety. Facility layout objectives include efficient workflow and minimizing costs. Basic layout types are product, process, and combination. Line balancing aims to evenly distribute work tasks among stations to minimize idle time and maximize output. Key considerations for process design and layout include required output, standardization, automation, and worker specialization.
Feed weighing systems
The design of a premix, compound feed or petfood production facility has one main goal: how to get all the raw materials into the end product(s); of course in an accurate, time- and cost-efficient and flexible fashion with the desired capacity and footprint, while respecting any contamination groups. And last but not least, within budget.
Maquinas embotelladoras
Operating and maintaining automatic packaging machines requires human involvement for proper setup, monitoring and maintenance. When first installed, an operator must level the machines and position them correctly on the production line. The operator also assists with initial setup and adjustments when changing between different products and packages. Once running, the operator monitors the line for issues and makes periodic adjustments, cleanings and inspections to ensure optimal performance and prevent breakdowns. While the machines automate much of the packaging process, the operator plays an important ongoing role in support of the equipment.
Analizador de Humedad en granos SUNCUE modelo Ctr 500es
The CTR-500ES single kernel moisture tester measures the moisture of individual kernels precisely. It displays the results in a bar graph that clearly shows the deviation in moisture content. The tester is easy to use with an automatic one-touch testing function and can test a large volume of samples. It has a wide test range for moisture content, allowing it to measure both high moisture before drying and low moisture after drying.
Aloevera processing line - Equipment for Aloe Vera Plant
The Brief of Aloe Vera Processing Line from the raw material receiving until the aseptic bulk bag filling process.
Contact us at candy@muninmax.co.th for further information or visit us our website www.muninmax.co.th
How Electronic Burettes help to perform highly precise and accurate titrations.
Electronic Burettes are an innovative product that help perform precise and accurate titrations. They eliminate manual weheel operation by using a motorized piston movement.
miniproject
The document describes an automatic irrigation system that uses a soil moisture sensor and microcontroller to minimize water waste and manual labor in agriculture. The system monitors soil moisture levels and automatically turns a motor on to start irrigation when the soil is dry and off when the soil is wet. An owner can also control the motor remotely via text messages to a GSM modem. The system aims to save water, energy, and labor costs while precisely meeting crops' watering needs. It could help farmers in India where seasonal rainfall means manual pumping is currently required.
Production - Reducing Machine Setup Time - IEM
The document discusses machine performance and how to improve it. It describes key ratios to understand like the ratio of operating time to setup time. It also discusses performance indicators like machine performance as a percentage. Graphs of performance over time are shown and statistical techniques are presented for monitoring setup times, like finding the average, maximum and minimum. The goal is to understand a machine's capacity to plan ahead and identify opportunities to increase operating hours and performance.
Farmpoint Moisture Meter is an Essential tool in Grain Quality Management.pdf
Farmpoint Moisture Meter is an Essential tool in Grain Quality Management.pdfAccurate Weighing Scales (U) Limited
Calculations are, of course, adapted for higher or lower levels of moisture content, but farmers will have estimated the value of their crop by weight and current market conditions, so that fluctuations can have a significant negative financial impact. It is not surprising then that they rely heavily on the accuracy of the technology used to determine the actual moisture content of their crop.
Thank you for allowing Accurate Weighing Scales (U) Ltd the privilege to serve you in advance.
For inquiries on deliveries contact us
Office +256 (0) 705 577 823, +256 (0) 775 259 917
Address: Wandegeya KCCA Market South Wing, 2nd Floor Room SSF 036
Email: weighingscales@countrywinggroup.com
Why data counting solutions
DATA Technologies solutions offer today wide range of counting solutions from standalone counters to fully automatic counting solutions. Besides over thousand customers in the diamond and seed industry, DATA also have many units in use with customer counting O ring, small screws and other metal parts, capacitors, small wooden parts, connectors, contactors, LED and others.
Bulk Counting Technology for Medical Components
Medical component manufacturers are often looking for the latest product developments to improve their processes.
When it comes to production, assembly, testing, inventory management or packaging, DATA’s innovative technology goes
a long way to improve operational processes.
With DAtA’s systems, products do not need to be separated over separate lines, nor do they need to be fed one by one or
paced at specific intervals, as is often the case in conventional counting systems. counting rates of up to 25,000 objects per
minute can be achieved for different shaped objects as small as 0.5mm, while the systems’ advanced mathematical algorithms ensures nearly 100% accuracy.
DATA’s bulk counting technology is based on a ‘free-fall’ concept, in which objects pass vertically through the detection unit, while maintaining a continuous uniform falling rate.
More Related Content
Similar to DATA S60 C&W: Counting System with Built-in Load Cell
Data Count & pack S 260
The document describes the DATA Count & Pack S-260, a fully automatic seed counting and packaging machine. It can count seeds from 1mm to 25mm in size and rapidly pack large quantities, such as 12 bags of 1,000 tomato seeds per minute. The machine delivers nearly 100% accurate counts while saving time and being more profitable than scale-based packaging. It has user-friendly controls and can be customized for different bag sizes.
STEPS INVOLVED IN AUTOMATED FEED MILL
The document describes the steps involved in automating a feed mill. It discusses the various control systems used like host computers, distributed control systems, industrial computers, and personal computer-based systems. It then provides details on the functions of these systems and how they control and monitor the different processes in the feed mill like batching, receiving, milling, mixing, pelletizing, cooling, and shipping. The automation improves operations by making them more accurate, efficient and helps detect any faults.
AUTOMATED FEED MILL.pptx
This document discusses the automation of feed mill processes through a programmable logic control system. It describes the main components of an automated feed mill including material receiving, grinding, mixing, pelletizing, cooling and bagging. The automation provides benefits like increased efficiency and consistency while reducing costs. However, automated systems also require technical skills for maintenance and come with higher initial and maintenance costs compared to manual systems.
Data Bulk Tablet Counting Machines ICU Series
The document describes the ICU Series bulk tablet counting machines from DATA Detection Technologies. The ICU 2-80 machine can count tablets at a rate of up to 90 bottles per minute with 100% counting accuracy. It has a vision-based counting system, broken tablet detection, and a small footprint. The machine dimensions are 1281mm x 604mm x 1853mm.
twist grain.pdf
Farmpoint Grain Moisture Meter For Farmers and Traders
The original Supertech moisture meter for grain and seeds
The Farmpoint moisture meter is the original Supertech product designed to measure the moisture level of grain and seeds. It provides essential assistance in the field when determining the best time for harvesting and is also used for regular moisture measurement during the drying process and in storage.
If grain is harvested wetter than necessary, the consequences are not only extra drying costs but also a significantly increased risk of quality loss and spoilage.
Quick and accurate moisture measurement
Handy, robust and easy to operate
Reliable results
Automatic temperature compensation
Automatic calculation of average value
High measuring range
Adjustment of calibrations
High quality – low price
Two year warranty
Designed and produced in Denmark
Thank you for allowing Accurate Weighing Scales (U) Ltd the privilege to serve you in advance.
For inquiries on deliveries contact us
Office +256 (0) 705 577 823, +256 (0) 775 259 917
Address: Wandegeya KCCA Market South Wing, 2nd Floor Room SSF 036
Email: weighingscales@countrywinggroup.com
Multi Head counting series
DATA's multi head seed counters use multiple detection systems to provide unparalleled counting rates at high accuracy levels through specialized counting software. The counters can replace or augment weight or volumetric packaging systems, integrating easily with existing packaging machines to create modern counting and packaging systems. DATA has installed over 50 multi head systems worldwide since 2010 to meet the needs of medium and large seed companies with high packaging demands.
View Online Catalogs Of Dairy Equipments | NETCO | www.milkanalyser.com
View Online Catalogs Of Dairy Equipments | NETCO | www.milkanalyser.comNETCO-New Dairy Engineering & Trading Company Pvt. Ltd.
Automatic Milk Collection & Testing Systems ,Dairy Consumables & Handling Accessories ,Laboratory Equipments ,Cream Separators ,Milk & Ghee Clarifier,Butter Churners & Accessories ,Packing & Sealing Machines ,Milk Pumps & Pasteurizers & Sterilizers ,Bulk Milk Cooling Systems ,Milk Chilling Units ,Cheese & Paneer Processing ,Mini Dairies , Milking Machines ,Khoa Machine ,Automatic Milk Vending Machines ,Weighing Scales For More Information Please Log On www.milkanalyser.comAutoration 3.0
The document describes the Autoration 3.0 system, a collaboration between Valmetal and Contrôle A-Tech Drummond. The system allows farms that cannot use belt feeders to regulate cow diets, lower costs, and improve management. It can manage up to 14 ingredients, recipes in various units, 20 unload groups, and wireless data transfer. The system aims to save time and labor while improving accuracy, inventory control, and data sharing with nutritionists. It provides detailed reports and remote access via free software. The Autoration 3.0 costs an average of $5,000 less than traditional systems and offers personalized automation.
Smartfarmingreview2 161130035655
This document provides an overview of smart farming techniques, including the purpose of smart farms to automate and optimize agriculture. It describes various sensors used in smart farming to measure soil moisture, temperature, and other variables. It also outlines the components used in a smart farming prototype, including an Arduino board, moisture sensor, pump, LCD display, and relay module. Finally, it discusses recent technologies applied to smart farming, such as precision agriculture robots and wireless sensor networks.
Smart farming using ARDUINO (Nirma University)
this is to giude those who wants to learnf about automation in the field of agriculture and green harvesting.
my presentation.pptx
This document discusses the automation of a sugar mill house. It begins with an introduction to mill house operations and the purpose of automation, which is to improve safety, prevent issues like jams, and optimize processes like maintaining consistent loads. It then describes the cane feeding and milling control strategies, including using variables frequency drives on motors. The system architecture uses a distributed control system with redundant components. Automation provides advantages like continuous feeding to reduce downtime, eliminating chokes, maintaining optimal mill speeds and loads, and reducing wear while increasing capacity and extraction efficiency.
Process Selection and Facility layout.ppt
This document discusses operations management processes including process selection, facility layout, and line balancing. There are five basic process types - job shop, batch, repetitive, continuous, and project - determined by required volume and variety. Facility layout objectives include efficient workflow and minimizing costs. Basic layout types are product, process, and combination. Line balancing aims to evenly distribute work tasks among stations to minimize idle time and maximize output. Key considerations for process design and layout include required output, standardization, automation, and worker specialization.
Feed weighing systems
The design of a premix, compound feed or petfood production facility has one main goal: how to get all the raw materials into the end product(s); of course in an accurate, time- and cost-efficient and flexible fashion with the desired capacity and footprint, while respecting any contamination groups. And last but not least, within budget.
Maquinas embotelladoras
Operating and maintaining automatic packaging machines requires human involvement for proper setup, monitoring and maintenance. When first installed, an operator must level the machines and position them correctly on the production line. The operator also assists with initial setup and adjustments when changing between different products and packages. Once running, the operator monitors the line for issues and makes periodic adjustments, cleanings and inspections to ensure optimal performance and prevent breakdowns. While the machines automate much of the packaging process, the operator plays an important ongoing role in support of the equipment.
Analizador de Humedad en granos SUNCUE modelo Ctr 500es
The CTR-500ES single kernel moisture tester measures the moisture of individual kernels precisely. It displays the results in a bar graph that clearly shows the deviation in moisture content. The tester is easy to use with an automatic one-touch testing function and can test a large volume of samples. It has a wide test range for moisture content, allowing it to measure both high moisture before drying and low moisture after drying.
Aloevera processing line - Equipment for Aloe Vera Plant
The Brief of Aloe Vera Processing Line from the raw material receiving until the aseptic bulk bag filling process.
Contact us at candy@muninmax.co.th for further information or visit us our website www.muninmax.co.th
How Electronic Burettes help to perform highly precise and accurate titrations.
Electronic Burettes are an innovative product that help perform precise and accurate titrations. They eliminate manual weheel operation by using a motorized piston movement.
miniproject
The document describes an automatic irrigation system that uses a soil moisture sensor and microcontroller to minimize water waste and manual labor in agriculture. The system monitors soil moisture levels and automatically turns a motor on to start irrigation when the soil is dry and off when the soil is wet. An owner can also control the motor remotely via text messages to a GSM modem. The system aims to save water, energy, and labor costs while precisely meeting crops' watering needs. It could help farmers in India where seasonal rainfall means manual pumping is currently required.
Production - Reducing Machine Setup Time - IEM
The document discusses machine performance and how to improve it. It describes key ratios to understand like the ratio of operating time to setup time. It also discusses performance indicators like machine performance as a percentage. Graphs of performance over time are shown and statistical techniques are presented for monitoring setup times, like finding the average, maximum and minimum. The goal is to understand a machine's capacity to plan ahead and identify opportunities to increase operating hours and performance.
Farmpoint Moisture Meter is an Essential tool in Grain Quality Management.pdf
Farmpoint Moisture Meter is an Essential tool in Grain Quality Management.pdfAccurate Weighing Scales (U) Limited
Calculations are, of course, adapted for higher or lower levels of moisture content, but farmers will have estimated the value of their crop by weight and current market conditions, so that fluctuations can have a significant negative financial impact. It is not surprising then that they rely heavily on the accuracy of the technology used to determine the actual moisture content of their crop.
Thank you for allowing Accurate Weighing Scales (U) Ltd the privilege to serve you in advance.
For inquiries on deliveries contact us
Office +256 (0) 705 577 823, +256 (0) 775 259 917
Address: Wandegeya KCCA Market South Wing, 2nd Floor Room SSF 036
Email: weighingscales@countrywinggroup.com
Similar to DATA S60 C&W: Counting System with Built-in Load Cell (20)
View Online Catalogs Of Dairy Equipments | NETCO | www.milkanalyser.com
View Online Catalogs Of Dairy Equipments | NETCO | www.milkanalyser.com
Analizador de Humedad en granos SUNCUE modelo Ctr 500es
Analizador de Humedad en granos SUNCUE modelo Ctr 500es
Aloevera processing line - Equipment for Aloe Vera Plant
Aloevera processing line - Equipment for Aloe Vera Plant
How Electronic Burettes help to perform highly precise and accurate titrations.
How Electronic Burettes help to perform highly precise and accurate titrations.
Farmpoint Moisture Meter is an Essential tool in Grain Quality Management.pdf
Farmpoint Moisture Meter is an Essential tool in Grain Quality Management.pdf
More from DATA Detection Technologies LTD.
Why data counting solutions
DATA Technologies solutions offer today wide range of counting solutions from standalone counters to fully automatic counting solutions. Besides over thousand customers in the diamond and seed industry, DATA also have many units in use with customer counting O ring, small screws and other metal parts, capacitors, small wooden parts, connectors, contactors, LED and others.
Bulk Counting Technology for Medical Components
Medical component manufacturers are often looking for the latest product developments to improve their processes.
When it comes to production, assembly, testing, inventory management or packaging, DATA’s innovative technology goes
a long way to improve operational processes.
With DAtA’s systems, products do not need to be separated over separate lines, nor do they need to be fed one by one or
paced at specific intervals, as is often the case in conventional counting systems. counting rates of up to 25,000 objects per
minute can be achieved for different shaped objects as small as 0.5mm, while the systems’ advanced mathematical algorithms ensures nearly 100% accuracy.
DATA’s bulk counting technology is based on a ‘free-fall’ concept, in which objects pass vertically through the detection unit, while maintaining a continuous uniform falling rate.
Related parts for trial research counting systems
Optional devices that can be integrated with DATA research counting systems, DATA Count R-25 Plus and DATA Count R-60 Plus
Small parts counting rates - DATA counters
DATA develops, manufactures, and markets advanced bulk counting solutions using real-time image processing technology. This enables fast, accurate, and reliable counting of a wide variety of small items up to 25,000 objects per minute. DATA's proprietary systems are used by over 1,300 customers worldwide in industries like seeds, diamonds, pharmaceuticals, and small parts.
DATA Standalone counters
DATA’s Tabletop Counters are designed for a wide range of industries, such as: Electrical Components, Medical Devices, , Plastic and Mouldings, Hardware and DIY, Watches & Glasses, dental parts and many other small objects.
APPLICATIONS
• Tabletop counters
• Semi-Automatic counters
• Inegration counting kit for industrial Packaging
• Integraiton counting head for inline integration
DATA Bulk Counting Technology for Small parts
DATA provides bulk counting and packaging systems for industries such as seeds, diamonds, pharmaceuticals, and small parts. Its core technology uses real-time image processing to count a variety of small items in bulk at speeds up to 25,000 per minute. DATA's systems do not require separating or pacing items and can count items as small as 0.5mm with nearly 100% accuracy. The technology is based on objects freely falling through a detection unit and maintains a continuous falling rate.
New integrated solution from Automated Packaging Systems
The document describes an integrated counting and packaging solution from Automated Packaging Systems and DATA Detection Technologies. The system uses a DATA Count U-162 SF&R counting head that can count small products in bulk at speeds up to 25,000 objects per minute. The counted objects are then fed into a pre-opened bag on an Autobag PS 125 bagging machine for sealing and packaging. The combined solution can accurately count and package a variety of small objects.
Yuval Lichi Intreview
Data Detection Technologies develops and manufactures equipment for counting, filling, and packaging small objects like seeds, diamonds, and pharmaceuticals. The company was founded in 2002 to address problems in bulk counting of diamonds, and developed an innovative solution using image processing to count thousands of small objects quickly and accurately. This breakthrough led the company to focus on the vegetable seed industry, where it now leads the market with products integrated into seed production lines. Data Detection is continuing research to develop universal counting solutions for other industries requiring speed and accuracy like pharmaceuticals.
Data count b 25 plus-1
DATA Count B-25 PLUS is the new generation of Bulk counters. This Counter counts almost any object ranging between 0.5 mm and 18 mm quickly and accurately, though eliminates the imprecision of weighing solutions and saves you money.
B-25 PLUS is designed to count large quantities of objects. It is ideally suited for any company which counts large quantities of objects as part of their daily process especially those who are dealing with problematic objects which cannot be counted with other counting solutions.
DATA Count Pharma JR (PH-JR)
DATA Count PH-JR, pellets counter, quickly and accurately counts pharmaceutical pellets and mini tablets as small as 0.2mm providing for the first time a much needed tool to drug developers and manufacturers that produces capsules containing pellets.
Capable of counting small pellets, pharmaceutical developers and manufacturers can now better control pellet production processes through both counting and weighing, thus measuring pellets homogeneity in terms of active and non-active material content.
DATA Count JR-PH - counting pharmaceutical pellets & mini tablets
DATA Count PH JR is a high-tech table-top counting machine that uses innovative electro optic technology to quickly and accurately count pharmaceutical pellets and mini tablets as small as 0.25mm. It provides drug developers and manufacturers a tool to better control pellet production processes through counting and weighing to measure pellet homogeneity. The machine counts at speeds up to 30,000 pellets per minute and assists manufacturers in attaining consistency, a valuable property for any drug.
Tabletop DATA Counter U-60B PLUS- Counting Small Parts
DATA U-60 counter, is the new generation of bulk counters with superior resolution for critical
parts in a wide range of industries, such as: Automotive, Aerospace, Electrical, Electronics,
Medical Devices, Manufacturing and DIY.
This counter can count objects of different shapes and sizes, quickly and accurately,
eliminating the imprecision of weighing solutions and significantly saving money
DATA Universal Counting - Counting Critical Parts
DATA presents the new generation of bulk counters with superior resolution for critical parts in a wide range of industries, such as: Electronics, Electrical, Health Care, Manufacturing, DIY etc.
The counters can count different shapes and sizes, quickly and accurately, eliminating the imprecision of weighing solutions and significantly saving money.
Invitation cipm 2013
DATA will present it's bulk counting technology at the 46th China International Pharmaceutical Machinery Exposition.
Invitation: Hong Kong show 2013
DATA Detection Technologies Ltd. is inviting the recipient to attend the Hong Kong Jewelry & Gem Fair from September 11-15, 2013 at Asia World Expo Hall 11 Booth S27. The invitation notes that DATA will be cooperating with Rubin & Son H.K. at the event and provides contact information for further details about DATA's gem and jewelry detection technologies that offer speed, precision and simplicity.
More from DATA Detection Technologies LTD. (20)
New integrated solution from Automated Packaging Systems
New integrated solution from Automated Packaging Systems
DATA Count JR-PH - counting pharmaceutical pellets & mini tablets
DATA Count JR-PH - counting pharmaceutical pellets & mini tablets
Tabletop DATA Counter U-60B PLUS- Counting Small Parts
Tabletop DATA Counter U-60B PLUS- Counting Small Parts
Integrative industrial s 260 brochure v-1.2013-kor
Integrative industrial s 260 brochure v-1.2013-kor
Integrative industrial s 260 brochure v-1.2013-jpn
Integrative industrial s 260 brochure v-1.2013-jpn
Recently uploaded
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
Astute Business Solutions | Oracle Cloud Partner |
Your goto partner for Oracle Cloud, PeopleSoft, E-Business Suite, and Ellucian Banner. We are a firm specialized in managed services and consulting.
What is an RPA CoE? Session 2 – CoE Roles
In this session, we will review the players involved in the CoE and how each role impacts opportunities.
Topics covered:
• What roles are essential?
• What place in the automation journey does each role play?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Day 2 - Intro to UiPath Studio Fundamentals
In our second session, we shall learn all about the main features and fundamentals of UiPath Studio that enable us to use the building blocks for any automation project.
📕 Detailed agenda:
Variables and Datatypes
Workflow Layouts
Arguments
Control Flows and Loops
Conditional Statements
💻 Extra training through UiPath Academy:
Variables, Constants, and Arguments in Studio
Control Flow in Studio
Leveraging the Graph for Clinical Trials and Standards
Katja Glaß
OpenStudyBuilder Community Manager - Katja Glaß Consulting
Marius Conjeaud
Principal Consultant - Neo4j
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
This LF Energy webinar took place June 20, 2024. It featured:
-Alex Thornton, LF Energy
-Hallie Cramer, Google
-Daniel Roesler, UtilityAPI
-Henry Richardson, WattTime
In response to the urgency and scale required to effectively address climate change, open source solutions offer significant potential for driving innovation and progress. Currently, there is a growing demand for standardization and interoperability in energy data and modeling. Open source standards and specifications within the energy sector can also alleviate challenges associated with data fragmentation, transparency, and accessibility. At the same time, it is crucial to consider privacy and security concerns throughout the development of open source platforms.
This webinar will delve into the motivations behind establishing LF Energy’s Carbon Data Specification Consortium. It will provide an overview of the draft specifications and the ongoing progress made by the respective working groups.
Three primary specifications will be discussed:
-Discovery and client registration, emphasizing transparent processes and secure and private access
-Customer data, centering around customer tariffs, bills, energy usage, and full consumption disclosure
-Power systems data, focusing on grid data, inclusive of transmission and distribution networks, generation, intergrid power flows, and market settlement data
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...Pitangent Analytics & Technology Solutions Pvt. Ltd
Discover top-tier mobile app development services, offering innovative solutions for iOS and Android. Enhance your business with custom, user-friendly mobile applications.Session 1 - Intro to Robotic Process Automation.pdf
👉 Check out our full 'Africa Series - Automation Student Developers (EN)' page to register for the full program:
https://bit.ly/Automation_Student_Kickstart
In this session, we shall introduce you to the world of automation, the UiPath Platform, and guide you on how to install and setup UiPath Studio on your Windows PC.
📕 Detailed agenda:
What is RPA? Benefits of RPA?
RPA Applications
The UiPath End-to-End Automation Platform
UiPath Studio CE Installation and Setup
💻 Extra training through UiPath Academy:
Introduction to Automation
UiPath Business Automation Platform
Explore automation development with UiPath Studio
👉 Register here for our upcoming Session 2 on June 20: Introduction to UiPath Studio Fundamentals: https://community.uipath.com/events/details/uipath-lagos-presents-session-2-introduction-to-uipath-studio-fundamentals/
Apps Break Data
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
"NATO Hackathon Winner: AI-Powered Drug Search", Taras Kloba
This is a session that details how PostgreSQL's features and Azure AI Services can be effectively used to significantly enhance the search functionality in any application.
In this session, we'll share insights on how we used PostgreSQL to facilitate precise searches across multiple fields in our mobile application. The techniques include using LIKE and ILIKE operators and integrating a trigram-based search to handle potential misspellings, thereby increasing the search accuracy.
We'll also discuss how the azure_ai extension on PostgreSQL databases in Azure and Azure AI Services were utilized to create vectors from user input, a feature beneficial when users wish to find specific items based on text prompts. While our application's case study involves a drug search, the techniques and principles shared in this session can be adapted to improve search functionality in a wide range of applications. Join us to learn how PostgreSQL and Azure AI can be harnessed to enhance your application's search capability.
Mutation Testing for Task-Oriented Chatbots
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
How we managed to grow and scale a RAG application from zero to thousands of users in 7 months. Lessons from technical challenges around managing high load for LLMs, RAGs and Vector databases.
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
Direct losses from downtime in 1 minute = $5-$10 thousand dollars. Reputation is priceless.
As part of the talk, we will consider the architectural strategies necessary for the development of highly loaded fintech solutions. We will focus on using queues and streaming to efficiently work and manage large amounts of data in real-time and to minimize latency.
We will focus special attention on the architectural patterns used in the design of the fintech system, microservices and event-driven architecture, which ensure scalability, fault tolerance, and consistency of the entire system.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
"Choosing proper type of scaling", Olena Syrota
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
Recently uploaded (20)
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Leveraging the Graph for Clinical Trials and Standards
Leveraging the Graph for Clinical Trials and Standards
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Session 1 - Intro to Robotic Process Automation.pdf
Session 1 - Intro to Robotic Process Automation.pdf
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
"NATO Hackathon Winner: AI-Powered Drug Search", Taras Kloba
"NATO Hackathon Winner: AI-Powered Drug Search", Taras Kloba
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
DATA S60 C&W: Counting System with Built-in Load Cell
- 1. MAIN ADVANTAGES • Automates the usually manual TSW calculation process, reducing labor costs • No minimal sampling interval • Bulk counting: Supports rapid counting of large samples • Reduces overfilling: Real-time TSW/TKW communication to the packing system means that weight set-points can be auto- adjusted frequently • High accuracy: Reduces weight variations and provides 100% packing accuracy even with large seed volumes • Automatic calibration: No need for manual intervention. • Adaptable operation: Can be used on different packing lines with no mechanical changes required. • Scalable seed size: Accommodates counting of seeds from 0.5mm to 25 mm. FEATURES • 100% counting accuracy • Real-time feeder adjustments for optimal accuracy • Rapid counting rates • User-friendly interface • Manual and automatic calibration modes • Multi-language user interface • Touch panel PC control • Count rates of more than 4000 corn seeds per minute TECHNICAL REQUIREMENTS • Compressed dry air • Voltage: 115/230 VAC, 1-phase • Frequency: 50/60 Hz • Power consumption: 120 W • Circuit breaker rate: Minimum 10 A slow blow DATA Detection Technologies Ltd. Topaz street, Park Tzora Industrial Area, Kibbutz Tzora, 9980300, Israel Tel: 972-73-2204444 | Fax: 972-73-2204466 | www.data-technologies.com HOW DOES IT WORK? • Seeds are poured/ directed into the DATA S60 C&W hopper. • A sensor in the hopper automatically activates the seed counter, which starts vibrating. • The counter stops when there are no seeds left in the machine. • The counted seeds are weighed and the TSW is calculated. • The TSW is displayed on the operator console and transmitted to the packing machine controller. DATA S60 C&W Counting System with Built-in Load Cell During seed processing and packing it is mandatory to have an accurate TSW/TKW (thousand seed/kernel weight). Typically, TSW is calculated at infrequent intervals, offline, on a relatively small sample by manually counting and weighing seeds. The DATA S60 C&W is equipped with an inline load cell that automatically calculates an accurate TSW for counted seeds. The TSW is displayed on the DATA S60 C&W console and transmitted to the packing system controller. The ground-breaking DATA S60 C&W combines counting and weighing in a single added-value solution when processing or packaging seeds in bulk. It is ideally suited for field crops such as Corn, Soybeans, Cotton, Beans, Sweet Corn and others that are sold by numbers of seeds but often handled according to TSW.