The document provides safety information and warnings for operating an excavator. It outlines the location of safety labels on the machine and summaries key safety precautions, including: never getting under a raised machine, ensuring all people are clear before operating, and turning off the engine and removing the key before leaving the operator's seat. It also warns of hazards such as high voltage lines, hot fluids that can cause burns, and rotating equipment that can cause injury.
Daewoo doosan dx140 w, dx160w excavator operation and maintenance manualudfjjjsekekkem
1. Check the load chart for the rated capacity of the excavator
at the load radius. Do not exceed the rated capacity.
2. Check the ground conditions under the load and path of
travel. Make sure the ground is firm and level.
3. Check the load for secure rigging and balance. The load
should be balanced and rigged to prevent swinging.
4. Check the path of travel for overhead obstructions and
ground obstructions. Plan the path before lifting.
5. Check the load chart for the rated capacity at the maximum
lift height. Do not exceed the rated capacity.
6. Lift the load slowly and smoothly. Avoid sudden stops and
This operation and maintenance manual provides instructions for the DOOSAN DX480LC and DX520LC excavators. It covers safety procedures, operational controls, operation techniques, maintenance schedules, troubleshooting, specifications, and other important information. DOOSAN reserves the right to improve its products and recommends periodically checking for updated documentation. Illustrations are representative and may vary from actual equipment.
Daewoo doosan dx140 w wheel excavator operator and maintenance manualfjskkksmemm
This document is an operation and maintenance manual for a Doosan excavator. It provides information on safety precautions, component locations, operational controls, maintenance procedures, troubleshooting, and specifications. Consumers are advised to periodically check with distributors for updated documentation on purchased equipment, as improvements are continuously being made to products. Illustrations used in the manual are representational and may vary from actual components. The manual contains detailed sections on starting and operating the excavator safely, as well as inspection and maintenance schedules.
Daewoo doosan solar 160 w v wheel excavator operator and maintenance manualfksjksmmde
The document provides safety information and instructions for operating and maintaining a Daewoo excavator. It includes locations of safety labels on the machine, precautions for lifting loads, unauthorized modifications, hazards, starting and operating the machine, maintenance, batteries, towing, shipping and lift capacity tables. Operators must read the manual thoroughly before use to safely handle, operate and service the excavator.
Daewoo doosan dx300 lc excavator operation and maintenance manualudfjjjskekmdm
This document provides operation and maintenance instructions for a Doosan excavator model DX300LC. It contains information on safety procedures, component locations, operational controls, operating instructions, inspection, maintenance, troubleshooting, specifications, and an index. Safety labels and precautions are outlined for lifting, unauthorized modifications, hazards, starting the engine, machine operation, maintenance, batteries, towing, and transportation.
Daewoo doosan dx140 w, dx160w excavator operation and maintenance manualjjksekfksmem
This document is an operation and maintenance manual for a Doosan excavator. It provides information on safety precautions, component locations, operational controls, maintenance procedures, troubleshooting, and specifications. Consumers are advised to periodically check with distributors for updated documentation on purchased equipment, as improvements are continuously being made to products. Illustrations used in the manual are representational and may vary from actual components. The manual contains detailed sections on starting and operating the excavator safely, as well as inspection and maintenance schedules.
Daewoo doosan dx140 w, dx160w excavator operation and maintenance manualfujsjejfkskekm
1. Check the load chart for the rated capacity of the excavator.
2. Check the weight of the load to be lifted. Do not exceed the
rated capacity.
3. Check the load chart for the rated capacity at the load's
radius from the center of rotation. Do not exceed the rated
capacity.
4. Check the load chart for the rated capacity at the load's
lifting height. Do not exceed the rated capacity.
5. Check the load chart for the rated capacity in the current
configuration of the excavator (e.g. with or without
attachments). Do not exceed the rated capacity.
6. Check that the load is balanced and stable
Daewoo doosan dx140 w, dx160w excavator operation and maintenance manualfjskkmemem
1. Check the load chart for the rated capacity of the excavator
at the load radius. Do not exceed the rated capacity.
2. Check the ground conditions under the load and path of
travel. Make sure the ground is firm and level.
3. Check the load for secure rigging and balance. Make sure
the load is properly rigged and balanced before lifting.
4. Check the swing area and overhead obstructions. Make sure
the swing area is clear and there are no overhead power lines
or other obstructions.
5. Check the load radius. The load radius affects the rated
capacity. Keep the load as close to the excavator as possible.
6
Daewoo doosan dx140 w, dx160w excavator operation and maintenance manualudfjjjsekekkem
1. Check the load chart for the rated capacity of the excavator
at the load radius. Do not exceed the rated capacity.
2. Check the ground conditions under the load and path of
travel. Make sure the ground is firm and level.
3. Check the load for secure rigging and balance. The load
should be balanced and rigged to prevent swinging.
4. Check the path of travel for overhead obstructions and
ground obstructions. Plan the path before lifting.
5. Check the load chart for the rated capacity at the maximum
lift height. Do not exceed the rated capacity.
6. Lift the load slowly and smoothly. Avoid sudden stops and
This operation and maintenance manual provides instructions for the DOOSAN DX480LC and DX520LC excavators. It covers safety procedures, operational controls, operation techniques, maintenance schedules, troubleshooting, specifications, and other important information. DOOSAN reserves the right to improve its products and recommends periodically checking for updated documentation. Illustrations are representative and may vary from actual equipment.
Daewoo doosan dx140 w wheel excavator operator and maintenance manualfjskkksmemm
This document is an operation and maintenance manual for a Doosan excavator. It provides information on safety precautions, component locations, operational controls, maintenance procedures, troubleshooting, and specifications. Consumers are advised to periodically check with distributors for updated documentation on purchased equipment, as improvements are continuously being made to products. Illustrations used in the manual are representational and may vary from actual components. The manual contains detailed sections on starting and operating the excavator safely, as well as inspection and maintenance schedules.
Daewoo doosan solar 160 w v wheel excavator operator and maintenance manualfksjksmmde
The document provides safety information and instructions for operating and maintaining a Daewoo excavator. It includes locations of safety labels on the machine, precautions for lifting loads, unauthorized modifications, hazards, starting and operating the machine, maintenance, batteries, towing, shipping and lift capacity tables. Operators must read the manual thoroughly before use to safely handle, operate and service the excavator.
Daewoo doosan dx300 lc excavator operation and maintenance manualudfjjjskekmdm
This document provides operation and maintenance instructions for a Doosan excavator model DX300LC. It contains information on safety procedures, component locations, operational controls, operating instructions, inspection, maintenance, troubleshooting, specifications, and an index. Safety labels and precautions are outlined for lifting, unauthorized modifications, hazards, starting the engine, machine operation, maintenance, batteries, towing, and transportation.
Daewoo doosan dx140 w, dx160w excavator operation and maintenance manualjjksekfksmem
This document is an operation and maintenance manual for a Doosan excavator. It provides information on safety precautions, component locations, operational controls, maintenance procedures, troubleshooting, and specifications. Consumers are advised to periodically check with distributors for updated documentation on purchased equipment, as improvements are continuously being made to products. Illustrations used in the manual are representational and may vary from actual components. The manual contains detailed sections on starting and operating the excavator safely, as well as inspection and maintenance schedules.
Daewoo doosan dx140 w, dx160w excavator operation and maintenance manualfujsjejfkskekm
1. Check the load chart for the rated capacity of the excavator.
2. Check the weight of the load to be lifted. Do not exceed the
rated capacity.
3. Check the load chart for the rated capacity at the load's
radius from the center of rotation. Do not exceed the rated
capacity.
4. Check the load chart for the rated capacity at the load's
lifting height. Do not exceed the rated capacity.
5. Check the load chart for the rated capacity in the current
configuration of the excavator (e.g. with or without
attachments). Do not exceed the rated capacity.
6. Check that the load is balanced and stable
Daewoo doosan dx140 w, dx160w excavator operation and maintenance manualfjskkmemem
1. Check the load chart for the rated capacity of the excavator
at the load radius. Do not exceed the rated capacity.
2. Check the ground conditions under the load and path of
travel. Make sure the ground is firm and level.
3. Check the load for secure rigging and balance. Make sure
the load is properly rigged and balanced before lifting.
4. Check the swing area and overhead obstructions. Make sure
the swing area is clear and there are no overhead power lines
or other obstructions.
5. Check the load radius. The load radius affects the rated
capacity. Keep the load as close to the excavator as possible.
6
Daewoo doosan dx160 w wheel excavator operator and maintenance manualfjskkksmemm
1. The document provides safety information and warnings for operating and maintaining an excavator. It outlines hazards related to high voltage power lines, hot fluids, rotating parts, and proper procedures for tasks like refueling or battery maintenance.
2. Operators must read all safety instructions before operating the excavator. The manufacturer reserves the right to improve products over time but is not obligated to update older models.
3. Safety labels on the excavator identify specific hazards and precautions. Operators and maintenance personnel must familiarize themselves with all warning signs and replace any that are missing or damaged.
The document provides safety information and warnings for operating and maintaining an excavator. It lists the location of safety labels on the excavator and describes each label's warning. The safety information is organized into sections covering safety labels, lifting precautions, unauthorized modifications, hazards, starting the engine, machine operation, maintenance, batteries, towing, transportation, and lift capacity tables. Operators and maintenance personnel are instructed to read this manual thoroughly before operating or servicing the excavator.
Daewoo Doosan DX480LC Excavator Operation and Maintenance manual (Serial Numb...ufjjfdjjskekmem
The document provides safety information and warnings for operating and maintaining an excavator. It includes locations of safety labels on the excavator and describes various hazards related to starting the engine, machine operation, maintenance, batteries, towing, shipping, and lifting capacity. Safety precautions are provided to prevent injuries from electrocution, high pressure components, hot fluids, rotating parts, and leaving the operator's seat unattended.
Daewoo Doosan DX520LC Excavator Operation and Maintenance manual (Serial Numb...fuusuefjjsekmm
This is the most complete Operation and Maintenance Manual for the DAEWOO DOOSAN DX520LC EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your DAEWOO DOOSAN DX520LC EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of DAEWOO DOOSAN DX520LC EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Operating Controls
Operation
Inspection, Maintenance and Adjustment
Transportation
Troubleshooting
Specifications
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Daewoo Doosan DX480LC Excavator Operation and Maintenance manual (Serial Numb...fujsjfjjkekmm
This is the most complete Operation and Maintenance Manual for the DAEWOO DOOSAN DX480LC EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your DAEWOO DOOSAN DX480LC EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of DAEWOO DOOSAN DX480LC EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Operating Controls
Operation
Inspection, Maintenance and Adjustment
Transportation
Troubleshooting
Specifications
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Daewoo Doosan DX520LC Excavator Operation and Maintenance manual (Serial Numb...ufsjjjkekmmdd
This is the most complete Operation and Maintenance Manual for the DAEWOO DOOSAN DX520LC EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your DAEWOO DOOSAN DX520LC EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of DAEWOO DOOSAN DX520LC EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Operating Controls
Operation
Inspection, Maintenance and Adjustment
Transportation
Troubleshooting
Specifications
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Daewoo Doosan DX520LC Excavator Operation and Maintenance manual (Serial Numb...fusjejfjksaekmm
This is the most complete Operation and Maintenance Manual for the DAEWOO DOOSAN DX520LC EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your DAEWOO DOOSAN DX520LC EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of DAEWOO DOOSAN DX520LC EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Operating Controls
Operation
Inspection, Maintenance and Adjustment
Transportation
Troubleshooting
Specifications
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
1. The document provides safety information and warnings for operating and maintaining an excavator. It identifies the location of safety labels on the excavator and explains their meanings.
2. Operators are instructed to read the entire safety section and understand all warnings before operating the excavator to avoid serious injuries. Unauthorized modifications to the excavator are prohibited.
3. Specific safety hazards that are highlighted include coming into contact with high voltage power lines, being struck by falling or closing windows, adjusting track tension improperly, and leaving the operator's seat without following proper safety procedures.
1. The document provides safety information and warnings for operating and maintaining an excavator. It identifies the location of safety labels on the excavator and explains their meanings.
2. Operators must read and understand the safety information before operating the excavator to avoid serious injuries. Specific hazards are highlighted for high voltages, high-pressure cylinders, batteries, hot fluids, and rotating parts.
3. Warnings indicate that unauthorized modifications are prohibited and that all personnel must be clear of the area before starting the excavator. The excavator must be parked properly when unattended.
1. The document provides safety information and warnings for operating and maintaining an excavator. It identifies the location of safety labels on the excavator and explains their meanings.
2. Operators must read and understand the safety information before operating the excavator to avoid serious injuries. Specific hazards are highlighted for high voltages, high-pressure cylinders, batteries, hot fluids, and rotating parts.
3. Proper procedures are outlined for tasks like adjusting track tension, opening windows, and leaving the operator's seat to prevent accidents. Operators are instructed to follow the maintenance guidelines to safely handle issues like hydraulic or electrical systems.
This operation and maintenance manual provides instructions for the DOOSAN DX480LC and DX520LC excavators. It covers safety procedures, operational controls, operation techniques, maintenance schedules, troubleshooting, specifications, and other important information. DOOSAN reserves the right to improve its products and recommends contacting distributors for updated documentation. Illustrations are representative and may vary from actual equipment.
This operation and maintenance manual provides instructions for the DOOSAN DX480LC and DX520LC excavators. It covers safety procedures, operational controls, operation techniques, maintenance schedules, troubleshooting, specifications, and other important information. DOOSAN reserves the right to improve its products and recommends contacting distributors for updated documentation. Illustrations are representative and may vary from actual equipment.
1. The document provides safety information and warnings for operating and maintaining an excavator. It identifies the location of safety labels on the excavator and describes various hazards.
2. Operators must read and understand the safety information before operating the excavator to avoid serious injury or death. Unauthorized modifications to the excavator are prohibited.
3. Specific hazards that are highlighted include high voltage electrical lines, high pressure components, hot fluids, rotating parts, and improper maintenance procedures. The safety lever must be in the locked position and key removed before leaving the operator's seat.
Kubota m5500 dt tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and part listings for a parts book. It defines the column headings used on part number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included to indicate part differences by country. The summary lists the main document sections and provides an example part listing for a crankcase.
Kubota m5040 hdc tractor parts catalogue manualdfjjsjkemmm
The document provides parts information for an engine, including:
- Descriptions of column headings for part number pages like part number, name, quantity, etc.
- Parts lists organized by component (e.g. crankcase, oil pan, cylinder head) with part numbers, names, quantities, and other details.
- Notes on country codes used for parts that may differ between countries.
Kubota l4610 dt hst tractor parts catalogue manualdfjjsjkemmm
This document provides part numbers and descriptions for a crankcase, including the crankcase itself along with various plugs, caps, pins, and other component parts. Key information includes the part number, description, quantity used, applicable serial number range, interchangeability, and remarks.
Kubota l4400 h tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages, including reference number, part number, part name, quantity, serial number range, and remarks. It notes country codes that may be included and what they indicate. Sample pages from the parts book are then provided that list part numbers, descriptions, quantities and other details for specific assembly items like the crankcase, oil pan, cylinder head, gear case and more.
Kubota l4310 dt gst-chst-c tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and definitions for parts books. It explains that the parts book headings will match the picture pages. It defines the column headings for part number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included to indicate part differences by country.
Kubota l3410 hst tractor parts catalogue manualdfjjsjkemmm
This document provides instructions and definitions for parts books. It explains the column headings used on parts number pages, including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. Country codes that may be included are also defined. An example page from the parts book is then shown listing specific part numbers, descriptions, and the book they can be found in.
Kubota l3410 gst tractor parts catalogue manualdfjjsjkemmm
This document provides instructions and definitions for parts books. It explains the column headings used on parts number pages, including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. Country codes that may be included are also defined. An example page from the parts book is then shown listing specific part numbers, descriptions, and the book they can be found in.
Kubota l3410 dt tractor parts catalogue manualdfjjsjkemmm
This document provides instructions and definitions for parts books. It explains the column headings used on parts number pages, including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. Country codes that may be included are also defined. An example page from the parts book is then shown listing specific part numbers, descriptions, and the book they can be found in.
Kubota l3300 dt gst tractor parts catalogue manualdfjjsjkemmm
This document provides instructions for parts books. It explains the column headings used on parts pages including reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included to indicate part differences between countries. The document then provides an example page from a parts book listing parts for an engine crankcase.
More Related Content
Similar to Daewoo doosan dx140 w wheel excavator operator and maintenance manual
Daewoo doosan dx160 w wheel excavator operator and maintenance manualfjskkksmemm
1. The document provides safety information and warnings for operating and maintaining an excavator. It outlines hazards related to high voltage power lines, hot fluids, rotating parts, and proper procedures for tasks like refueling or battery maintenance.
2. Operators must read all safety instructions before operating the excavator. The manufacturer reserves the right to improve products over time but is not obligated to update older models.
3. Safety labels on the excavator identify specific hazards and precautions. Operators and maintenance personnel must familiarize themselves with all warning signs and replace any that are missing or damaged.
The document provides safety information and warnings for operating and maintaining an excavator. It lists the location of safety labels on the excavator and describes each label's warning. The safety information is organized into sections covering safety labels, lifting precautions, unauthorized modifications, hazards, starting the engine, machine operation, maintenance, batteries, towing, transportation, and lift capacity tables. Operators and maintenance personnel are instructed to read this manual thoroughly before operating or servicing the excavator.
Daewoo Doosan DX480LC Excavator Operation and Maintenance manual (Serial Numb...ufjjfdjjskekmem
The document provides safety information and warnings for operating and maintaining an excavator. It includes locations of safety labels on the excavator and describes various hazards related to starting the engine, machine operation, maintenance, batteries, towing, shipping, and lifting capacity. Safety precautions are provided to prevent injuries from electrocution, high pressure components, hot fluids, rotating parts, and leaving the operator's seat unattended.
Daewoo Doosan DX520LC Excavator Operation and Maintenance manual (Serial Numb...fuusuefjjsekmm
This is the most complete Operation and Maintenance Manual for the DAEWOO DOOSAN DX520LC EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your DAEWOO DOOSAN DX520LC EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of DAEWOO DOOSAN DX520LC EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Operating Controls
Operation
Inspection, Maintenance and Adjustment
Transportation
Troubleshooting
Specifications
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Daewoo Doosan DX480LC Excavator Operation and Maintenance manual (Serial Numb...fujsjfjjkekmm
This is the most complete Operation and Maintenance Manual for the DAEWOO DOOSAN DX480LC EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your DAEWOO DOOSAN DX480LC EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of DAEWOO DOOSAN DX480LC EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Operating Controls
Operation
Inspection, Maintenance and Adjustment
Transportation
Troubleshooting
Specifications
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Daewoo Doosan DX520LC Excavator Operation and Maintenance manual (Serial Numb...ufsjjjkekmmdd
This is the most complete Operation and Maintenance Manual for the DAEWOO DOOSAN DX520LC EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your DAEWOO DOOSAN DX520LC EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of DAEWOO DOOSAN DX520LC EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Operating Controls
Operation
Inspection, Maintenance and Adjustment
Transportation
Troubleshooting
Specifications
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Daewoo Doosan DX520LC Excavator Operation and Maintenance manual (Serial Numb...fusjejfjksaekmm
This is the most complete Operation and Maintenance Manual for the DAEWOO DOOSAN DX520LC EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your DAEWOO DOOSAN DX520LC EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of DAEWOO DOOSAN DX520LC EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Operating Controls
Operation
Inspection, Maintenance and Adjustment
Transportation
Troubleshooting
Specifications
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
1. The document provides safety information and warnings for operating and maintaining an excavator. It identifies the location of safety labels on the excavator and explains their meanings.
2. Operators are instructed to read the entire safety section and understand all warnings before operating the excavator to avoid serious injuries. Unauthorized modifications to the excavator are prohibited.
3. Specific safety hazards that are highlighted include coming into contact with high voltage power lines, being struck by falling or closing windows, adjusting track tension improperly, and leaving the operator's seat without following proper safety procedures.
1. The document provides safety information and warnings for operating and maintaining an excavator. It identifies the location of safety labels on the excavator and explains their meanings.
2. Operators must read and understand the safety information before operating the excavator to avoid serious injuries. Specific hazards are highlighted for high voltages, high-pressure cylinders, batteries, hot fluids, and rotating parts.
3. Warnings indicate that unauthorized modifications are prohibited and that all personnel must be clear of the area before starting the excavator. The excavator must be parked properly when unattended.
1. The document provides safety information and warnings for operating and maintaining an excavator. It identifies the location of safety labels on the excavator and explains their meanings.
2. Operators must read and understand the safety information before operating the excavator to avoid serious injuries. Specific hazards are highlighted for high voltages, high-pressure cylinders, batteries, hot fluids, and rotating parts.
3. Proper procedures are outlined for tasks like adjusting track tension, opening windows, and leaving the operator's seat to prevent accidents. Operators are instructed to follow the maintenance guidelines to safely handle issues like hydraulic or electrical systems.
This operation and maintenance manual provides instructions for the DOOSAN DX480LC and DX520LC excavators. It covers safety procedures, operational controls, operation techniques, maintenance schedules, troubleshooting, specifications, and other important information. DOOSAN reserves the right to improve its products and recommends contacting distributors for updated documentation. Illustrations are representative and may vary from actual equipment.
This operation and maintenance manual provides instructions for the DOOSAN DX480LC and DX520LC excavators. It covers safety procedures, operational controls, operation techniques, maintenance schedules, troubleshooting, specifications, and other important information. DOOSAN reserves the right to improve its products and recommends contacting distributors for updated documentation. Illustrations are representative and may vary from actual equipment.
1. The document provides safety information and warnings for operating and maintaining an excavator. It identifies the location of safety labels on the excavator and describes various hazards.
2. Operators must read and understand the safety information before operating the excavator to avoid serious injury or death. Unauthorized modifications to the excavator are prohibited.
3. Specific hazards that are highlighted include high voltage electrical lines, high pressure components, hot fluids, rotating parts, and improper maintenance procedures. The safety lever must be in the locked position and key removed before leaving the operator's seat.
Similar to Daewoo doosan dx140 w wheel excavator operator and maintenance manual (13)
Kubota m5500 dt tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and part listings for a parts book. It defines the column headings used on part number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included to indicate part differences by country. The summary lists the main document sections and provides an example part listing for a crankcase.
Kubota m5040 hdc tractor parts catalogue manualdfjjsjkemmm
The document provides parts information for an engine, including:
- Descriptions of column headings for part number pages like part number, name, quantity, etc.
- Parts lists organized by component (e.g. crankcase, oil pan, cylinder head) with part numbers, names, quantities, and other details.
- Notes on country codes used for parts that may differ between countries.
Kubota l4610 dt hst tractor parts catalogue manualdfjjsjkemmm
This document provides part numbers and descriptions for a crankcase, including the crankcase itself along with various plugs, caps, pins, and other component parts. Key information includes the part number, description, quantity used, applicable serial number range, interchangeability, and remarks.
Kubota l4400 h tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages, including reference number, part number, part name, quantity, serial number range, and remarks. It notes country codes that may be included and what they indicate. Sample pages from the parts book are then provided that list part numbers, descriptions, quantities and other details for specific assembly items like the crankcase, oil pan, cylinder head, gear case and more.
Kubota l4310 dt gst-chst-c tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and definitions for parts books. It explains that the parts book headings will match the picture pages. It defines the column headings for part number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included to indicate part differences by country.
Kubota l3410 hst tractor parts catalogue manualdfjjsjkemmm
This document provides instructions and definitions for parts books. It explains the column headings used on parts number pages, including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. Country codes that may be included are also defined. An example page from the parts book is then shown listing specific part numbers, descriptions, and the book they can be found in.
Kubota l3410 gst tractor parts catalogue manualdfjjsjkemmm
This document provides instructions and definitions for parts books. It explains the column headings used on parts number pages, including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. Country codes that may be included are also defined. An example page from the parts book is then shown listing specific part numbers, descriptions, and the book they can be found in.
Kubota l3410 dt tractor parts catalogue manualdfjjsjkemmm
This document provides instructions and definitions for parts books. It explains the column headings used on parts number pages, including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. Country codes that may be included are also defined. An example page from the parts book is then shown listing specific part numbers, descriptions, and the book they can be found in.
Kubota l3300 dt gst tractor parts catalogue manualdfjjsjkemmm
This document provides instructions for parts books. It explains the column headings used on parts pages including reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included to indicate part differences between countries. The document then provides an example page from a parts book listing parts for an engine crankcase.
Kubota l3130 hst tractor parts catalogue manualdfjjsjkemmm
The document provides instructions for parts books, including definitions of column headings in parts number pages such as reference number, part number, description, quantity, serial number range. It also notes country codes that may be included for parts that differ by country, such as parts working in all countries except France. The document then provides an index of parts for a tractor model broken down by system such as engine, fuel, electrical, transmission, hydraulics, with part numbers and references to parts books.
Kubota l3130 gst tractor parts catalogue manualdfjjsjkemmm
The document provides instructions for parts books, including definitions of column headings in parts number pages such as Reference Number, Part Number, Description, Quantity, Serial Number range, Interchangeability, and Remarks. It also notes country codes that may be included, such as exceptions for parts in other countries like France (FR). Diagrams of product parts are indexed for locating specific components.
Kubota l3130 dt tractor parts catalogue manualdfjjsjkemmm
The document provides instructions for parts books, including definitions of column headings in parts number pages such as reference number, part number, description, quantity, serial number range. It also notes country codes that may be included for parts that differ by country, such as parts working in all countries except France. The document then provides an index of parts for a tractor model broken down by system such as engine, fuel, electrical, transmission, hydraulics, with part numbers and references to parts books.
Kubota l2900 f tractor parts catalogue manualdfjjsjkemmm
This document provides an index and part listings for an L2900F product. It includes sections for the engine, fuel system, cooling water system, electrical system, clutch, transmission, rear axle, brake, front axle, steering, hydraulic system, hood, labels, and accessories. Each section lists the relevant part numbers, descriptions, quantities, and other specifications for the individual components.
Kubota l2900 dt tractor parts catalogue manualdfjjsjkemmm
The crankcase parts list includes over 230 individual parts that make up the crankcase assembly. It lists each part number, description, quantity used, applicable serial number range, interchangeability, remarks, and weight. Key details included are the total weight of the assembled crankcase (48.5kg/106.7lbs) and that most common individual parts like plugs and seals weigh only a few grams.
Kubota l2800 hst tractor parts catalogue manualdfjjsjkemmm
This document provides instructions for using a parts book for a tractor model. It defines the column headings used on parts number pages, including the part reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included to indicate if a part is different for other countries. The document then provides an index of parts for the tractor model with the part number and relevant parts book for each item.
Kubota l2800 dt tractor parts catalogue manualdfjjsjkemmm
This document provides instructions for using parts books and describes the column headings used on parts number pages. It explains that country codes may be included to indicate if a part is different for other countries. Finally, it lists frequently used parts for a L2800DT/HST tractor, including the part number, description, and reference book for each part.
Kubota l2600 dt tractor parts catalogue manualdfjjsjkemmm
This document provides part numbers and descriptions for a cylinder head. It includes a list of 170 parts with information on the part number, description, quantity used, applicable serial number range, interchangeability, and remarks. It notes country codes that may be relevant for part interchangeability between countries like the US, Canada, France, etc. The total weight of the cylinder head component is provided at the end.
Kubota l2500 f tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and part numbers for a parts book. It lists the column headings used on parts pages including the reference number, part number, description, quantity, serial number range and other details. It then provides an example page from the parts book with over 250 individual part numbers listed for the crankcase component.
Kubota l2500 dt tractor parts catalogue manualdfjjsjkemmm
The document provides instructions for parts books. It defines the column headings used on parts number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. Country codes are also explained, with symbols indicating the country each part is for (e.g. A for USA, CA for Canada, FR for France). An example page from a parts book is then shown listing parts for an engine crankcase, with the corresponding information for each part.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at Multifamily Properties by Kevin Donnelly
Daewoo doosan dx140 w wheel excavator operator and maintenance manual
1. Copyright Doosan 2006
K1024898E Operation and Maintenance Manual
DOOSAN reserves the right to improve our products in a continuing process to provide the best possible product
to the market place. These improvements can be implemented at any time with no obligation to change materials
on previously sold products. It is recommended that consumers periodically contact their distributors for recent
documentation on purchased equipment.
This documentation may include attachments and optional equipment that is not available in your machine's
package. Please call your distributor for additional items that you may require.
Illustrations used throughout this manual are used only as a representation of the actual piece of equipment, and
may vary from the actual item.
Operation and Maintenance Manual
K1024898E
Serial Number 5001 and Up
September 2006
DX140W/DX160W
2. K1024898E
I
Table of Contents
Table of Contents
Safety..........................................................................................1-1
To the Operator of a DOOSAN Daewoo Excavator ........................... 1-1
Location of Safety Labels................................................................... 1-5
Summary of Safety Precautions for Lifting in Digging Mode............ 1-13
Unauthorized Modifications.............................................................. 1-14
General Hazard Information............................................................. 1-14
Before Starting Engine..................................................................... 1-23
Machine Operation........................................................................... 1-27
Maintenance .................................................................................... 1-33
Battery ............................................................................................. 1-41
Towing.............................................................................................. 1-43
Shipping and Transportation ............................................................ 1-44
Excavator Rated Lift Capacity Tables............................................... 1-45
Operating Controls....................................................................2-1
Component Locations........................................................................ 2-4
Operator's Area.................................................................................. 2-6
Operational Controls and Panels ....................................................... 2-8
Instrument Panel.............................................................................. 2-26
Multifunction Gauge and Graphic Information ................................. 2-32
Mode Selector Buttons..................................................................... 2-38
Setting Main Menu........................................................................... 2-40
Flow Control..................................................................................... 2-49
Operation Selection Display............................................................. 2-51
Heater and Air Conditioner Control Panel........................................ 2-53
Stereo .............................................................................................. 2-60
Miscellaneous Electrical Devices..................................................... 2-62
Seat Adjustment............................................................................... 2-64
3. K1024898E
Table of Contents
II
Ceiling Cover ................................................................................... 2-68
Front Windows ................................................................................. 2-69
Door Side Latch ............................................................................... 2-71
Cabin Storage Compartments ......................................................... 2-72
Ashtray............................................................................................. 2-72
Sun Visor.......................................................................................... 2-73
Hanger ............................................................................................. 2-73
Cup Holder....................................................................................... 2-74
Door Window Holder........................................................................ 2-74
Emergency Glass Breaking Tool...................................................... 2-74
Miscellaneous Access Covers and Doors........................................ 2-75
Swing Lock Pin and Mechanism...................................................... 2-77
Wheel Chocks.................................................................................. 2-77
Operation....................................................................................3-1
To Handle a New Excavator............................................................... 3-1
Starting and Stopping the Engine...................................................... 3-2
Safety Lever ..................................................................................... 3-14
Travel................................................................................................ 3-15
Operating Instructions...................................................................... 3-23
Operating Precautions ..................................................................... 3-31
Parking Excavator............................................................................ 3-36
Towing Procedure ............................................................................ 3-37
Hydraulic Breaker ............................................................................ 3-39
Adjusting the Pump Flow ................................................................. 3-44
Operating Techniques ...................................................................... 3-47
Operation Under Unusual Conditions .............................................. 3-49
Inspection, Maintenance and Adjustment...............................4-1
Preventive Maintenance..................................................................... 4-1
Preliminary Work Machine Setup for Maintenance............................ 4-4
Table of Recommended Lubricants ................................................... 4-6
Fluid Capacities ................................................................................. 4-8
4. K1024898E
III
Table of Contents
Lubrication and Service Chart ........................................................... 4-8
Maintenance Intervals...................................................................... 4-13
10 Hour / Daily Service .................................................................... 4-16
50 Hour / Weekly Service ................................................................ 4-26
250 Hour Service............................................................................. 4-30
500 Hour / 3 Month Service............................................................. 4-35
1,000 Hour / 6 Month Service.......................................................... 4-46
2,000 Hour / Yearly Service.............................................................. 4-53
4,000 Hour / Biennial Service .......................................................... 4-62
12,000 Hour / Six Year Service ........................................................ 4-63
Air-Conditioning System .................................................................. 4-64
Inspection of Bolt And Nut Tightening Elements.............................. 4-65
Bucket .............................................................................................. 4-72
Electrical System ............................................................................. 4-75
Engine Cooling System.................................................................... 4-79
Fuel Transfer Pump (Optional) ......................................................... 4-81
Handling of Accumulator.................................................................. 4-84
Tires and Wheels ............................................................................. 4-86
Venting and Priming Hydraulic System............................................ 4-91
Maintenance in Special Conditions.................................................. 4-94
Long Term Storage........................................................................... 4-95
Transportation............................................................................5-1
Short Distance Self-powered Travel................................................... 5-2
Trailer Loading/Unloading Procedures............................................... 5-3
Troubleshooting.........................................................................6-1
Engine................................................................................................ 6-1
Hydraulic System............................................................................... 6-3
Swing System .................................................................................... 6-4
Electrical System ............................................................................... 6-4
Travel System..................................................................................... 6-5
Steering ............................................................................................. 6-6
5. K1024898E
Table of Contents
IV
Brakes................................................................................................ 6-7
Specification ..............................................................................7-1
Specification....................................................................................... 7-1
Overall Dimensions............................................................................ 7-4
Working Range .................................................................................. 7-7
Index ...........................................................................................8-1
6. OP000421
1-1
Safety
OP000421
1Safety
TO THE OPERATOR OF A
DOOSAN DAEWOO EXCAVATOR
Please respect the importance of taking responsibility for your
own safety, and that of other people who may be affected by
your actions.
The safety information on the following pages is organized into
the following sections:
1. “Location of Safety Labels” on page 1-5
2. “Summary of Safety Precautions for Lifting in Digging
Mode” on page 1-13
3. “Unauthorized Modifications” on page 1-14
4. “General Hazard Information” on page 1-14
5. “Before Starting Engine” on page 1-23
6. “Machine Operation” on page 1-27
7. “Maintenance” on page 1-33
8. “Battery” on page 1-41
9. “Towing” on page 1-43
10. “Shipping and Transportation” on page 1-44
11. “Excavator Rated Lift Capacity Tables” on page 1-45
DANGER!
Unsafe use of the excavator could lead to serious injury or
death. Operating procedures, maintenance and equipment
practices or traveling or shipping methods that do not
follow the safety guidelines on the following pages could
cause serious, potentially fatal injuries or extensive damage
to the machine or nearby property.
7. OP000421
Safety
1-2
WARNING!
Improper operation and maintenance of this machine can
be hazardous and could result in serious injury or death.
Operator and maintenance personnel should read this
manual thoroughly before beginning operation or
maintenance.
Keep this manual in the storage compartment to the rear of
the operator's seat, and have all personnel involved in
working on the machine read the manual periodically.
Some actions involved in operation and maintenance of the
machine can cause a serious accident, if they are not done
in a manner described in this manual.
The procedures and precautions given in this manual apply
only to intended uses of the machine.
If you use your machine for any unintended uses that are
not specifically prohibited, you must be sure that it is safe
for any others. In no event should you or others engage in
prohibited uses or actions as described in this manual.
DOOSAN delivers machines that comply with all applicable
regulations and standards of the country to which it has
been shipped. If this machine has been purchased in
another country or purchased from someone in another
country, it may lack certain safety devices and
specifications that are necessary for use in your country. If
there is any question about whether your product complies
with the applicable standards and regulations of your
country, consult DOOSAN or your DOOSAN distributor
before operating the machine.
8. OP000421
1-3
Safety
Learn the Signal Words Used with the
Safety Alert Symbol
The words "CAUTION," "WARNING," and "DANGER" used
throughout this manual and on decals on the machine indicate
degree of risk of hazards or unsafe practices. All three degrees
of risk indicate that safety is involved. Observe precautions
indicated whenever you see the Safety Alert "Triangle," no
matter which signal word appears next to the "Exclamation
Point" symbol.
SAFETY ALERT SYMBOL
Be Prepared - Get to Know All Operating and Safety
Instructions.
This is the Safety Alert Symbol. Wherever it appears in this
manual or on safety signs on the machine you should be
alert to the potential for personal injury or accidents.
Always observe safety precautions and follow
recommended procedures.
CAUTION!
This word is used on safety messages and safety labels and
indicates potential of a hazardous situation that, if not
avoided, could result in minor or moderate injury. It may
also be used to alert against a generally unsafe practice.
WARNING!
This word is used on safety messages and safety labels and
indicates potential of a hazardous situation that, if not
avoided, could result in serious injury or death. It may also
be used to alert against a highly unsafe practice.
DANGER!
This word is used on safety messages and safety labels and
indicates an imminent hazard of a situation that, if not
avoided, is very likely to cause death or extremely serious
injury. It may also be used to alert against equipment that
may explode or detonate if handled or treated carelessly.
9. OP000421
Safety
1-4
Safety precautions are described in SAFETY from page 1-5 on.
DOOSAN cannot predict every circumstance that might involve
a potential hazard in operation and maintenance. Therefore the
safety messages in this manual and on the machine may not
include all possible safety precautions. If any procedures or
actions not specifically recommended or allowed in this manual
are used, you must be sure that you and others can do such
procedures and actions safely and without damaging the
machine. If you are unsure about the safety of some procedures,
contact a DOOSAN distributor.
10. OP000421
1-5
Safety
LOCATION OF SAFETY LABELS
There are several specific warning signs on this machine. The
exact location of hazards and the description of the hazards are
reviewed in this section.
Please become familiarized with all warning signs.
Make sure that all of the warning signs are legible. Clean the
warning signs or replace the warning signs if you cannot read
the words. Replace the illustrations if the illustrations are not
visible. When you clean the warning signs, use a cloth, water
and soap. Do not use solvent, gasoline, or other harsh
chemicals to clean the safety signs.
Solvents, gasoline, or other harsh chemicals could loosen the
adhesive that secures the warning sign. Loose adhesive will
allow the warning sign to fall off.
Replace any safety sign that is damaged, or missing. If a safety
sign is attached to a part that is replaced, install a safety sign on
the replacement part.
3 4 2
1
10
9
9 7
8
11
6
13
14
5
12
FG006118
Figure 1
11. OP000421
Safety
1-6
1. Warnings for Operation, Inspection
and Maintenance (190-00742,
190-00092)
2. Warnings for High Voltage (190-00689,
190-00096)
AVOID DEATH OR SERIOUS INJURY. - READ AND UNDERSTAND
OPERATION MANUAL AND SAFETY LABELS prior to operating
this machine.
190-00688
190-00092
Never get in under the machine while it is being jacked up
with boom and arm.
Sound the horn to alert the people nearby before operating,
and make sure that all persons are clear of area.
Controls may be changed for attachments or operator
preference. Try control pattern before operating.
ARO1080L
ARO1090L
DANGER
SERIOUS INJURY OR DEATH BY
ELECTROCTION can occur if
machine or attachments are
not a safe distance from electrical
power lines.
Line voltage Safe Distance
6.6 kv
66.6 kv
275.0 kv
At least 3m(10ft)
At least 5m(16ft)
At least 10m(33ft)
190-00689
190-00096
12. OP000421
1-7
Safety
3. Warnings When Opening a Front
Window (2190-3388, 190-00093)
4. Warnings for Leaving Operator's Seat
(190-00693, 190-00094)
FG000665
When raising window,
lock it in place with lock
pins on both sides.
Falling window can cause
injury.
2190-3388
190-00093
ARO1140L
190-00094
Sudden and unwanted machine
movement can cause serious
injury or death.
Always make sure when leaving
operator's seat to :
Lower equipment to the ground.
Move safety lever to LOCK position.
Turn key switch OFF. Remove key
from switch.
190-00693
13. OP000421
Safety
1-8
5. Warnings for Batteries Maintenance
(2190-2533A, 190-00100)
6. Warnings for High Temperature
Hydraulic Oil (190-00691, 190-00097)
ARO1150L
190-00100
Battery fumes can explode. Keep sparks and flames away
from batteries.
Always avoid storing metals like tools or flammable
materials around or on the batteries. Explosion or fire
can be caused by shortcircuiting batteries.
Surfuric acid in battery is poisonous. It is strong enough
burn skin, eat holes in clothing, and cause blindness
if splashed eyes.
If you spill acid on yourself;
1. Flush your skin with water.
2. Apply baking soda or lime to help neutralize the acid.
3. Flush your eyes with water for 10-15 minutes.
Get medical attention immediately.
2190-2533A
ARO1160L
HOT OIL CAN CAUSE INJURY OR
BLINDNESS.
To prevent hot oil from spurting out:
Turn engine off
Allow oil to cool
Slowly loosen cap to relieve
pressure
190-00691
190-00097
14. OP000421
1-9
Safety
7. Warnings for Hot Coolant (190-00692,
190-00097)
8. Warnings for Handling an Accumulator
(190-00703, 190-00099)
ARO1170L
190-00097
HOT COOLANT CAN CAUSE INJURY
OR BLINDNESS.
Never loosen or open radiator cap
when coolant is hot and under
pressure.
To open cap, stop engine, wait until
radiator is cool. Then loosen cap
slowly to relieve the pressure.
190-00692
EXPLOSIONHAZARD
Keep away from flame.
Do not weld on, or drill
into the accumulator.
190-00703
190-00099
ARO1180L
15. OP000421
Safety
1-10
9. Warnings for Rotating Parts
(190-00694, 190-00095, 190-00557)
10. Warning Tag - Used When Inspection
and Maintenance (190-00695,
190-00098)
ARO1190L
Rotating parts can cause
personal injury.
Keep away from fan and
belt when engine is run-
ning. Stop engine before
servicing.
190-00694
190-00095
190-00557
190-00098
ARO1200L
WARNING
DO NOT OPERATE
when performing inspection
or maintenance
190-00695
17. OP000421
Safety
1-12
13. Keep Out of the Swing Area
(2190-3379, K1008571)
14. Warnings for Front Attachments
(190-00652)
FG000180
2190-3379
K1008571
ARO1230L
190-00652
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. OP000421
1-13
Safety
SUMMARY OF SAFETY
PRECAUTIONS FOR LIFTING IN
DIGGING MODE
To lift safely while in Digging Mode, the following items must be
evaluated by the operator and the work site crew.
• Condition of ground support.
• Excavator configuration and attachments.
• Weight, lifting height and lifting radius.
• Safe rigging of the load.
• Proper handling of the suspended load.
Tag lines on opposite sides of the load can be very helpful in
keeping a suspended load secure, if they are anchored safely to
control points on the ground.
Always engage the "Digging Mode" control on the Instrument
Panel before using the excavator for lifting work.
DANGER!
Unsafe use of the excavator while making rated lifts could
cause serious, potentially fatal injuries or extensive damage
to the machine or nearby property. Do not let anyone
operate the machine unless they've been properly trained
and understand the information in the Operation and
Maintenance Manual.
WARNING!
NEVER wrap a tag line around your hands or body.
NEVER rely on tag lines or make rated lifts when wind gusts
are more than 48.3 km/h (30 MPH). Be prepared for any type
of wind gust when working with loads that have a large
surface area.
WARNING!
If you need more information or have any questions or
concerns about safe operating procedures or working the
excavator correctly in a particular application or in the
specific conditions of your individual operating
environment, please consult your local DOOSAN
representative.
20. OP000421
Safety
1-14
UNAUTHORIZED
MODIFICATIONS
Any modification made without authorization or written approval
from DOOSAN can create a safety hazard, for which the
machine owner must be held responsible.
For safety's sake, replace all OEM parts with the correct
authorized or genuine DOOSAN part. For example, not taking
the time to replace fasteners, bolts or nuts with the correct
replacement parts could lead to a condition in which the safety
of critical assemblies is dangerously compromised.
GENERAL HAZARD
INFORMATION
Safety Rules
Only trained and authorized personnel can operate and maintain
the machine.
Follow all safety rules, precautions and instructions when
operating or performing maintenance on the machine.
Do not operate the machine if you are not feeling well, if you are
taking medication that makes you feel sleepy, if you have been
drinking, or if you are suffering from emotional problems. These
problems will interfere with your sense of judgement in
emergencies and may cause accidents.
When working with another operator or with a person on work
site traffic duty, be sure that all personnel know the nature of the
work and understand all hand signals that are to be used.
Always observe strictly any other rules related to safety.
Safety Features
Be sure that all guards and covers are installed in their proper
position. Have guards and covers repaired immediately if
damaged.
Be sure that you understand the method of use of safety
features such as safety lock lever and the seat belt, and use
them properly.
Never remove any safety features. Always keep them in good
operating condition.
Failure to use safety features according to the instructions in the
Operation and Maintenance Manual could result in serious
bodily injury.