- The document provides safety information and instructions for operating and maintaining a Doosan wheel loader.
- It identifies the location of safety labels on the machine and warns that unauthorized modifications can create safety hazards.
- General safety rules include using safety features properly, operating only if feeling well, and being aware of hazards inside the operator's cabin.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
Daewoo doosan dl200 tc wheel loader operator and maintenance manual
1. Copyright Doosan 2006
K1024537E Operation and Maintenance Manual
DOOSAN reserves the right to improve its products continuously, delivering the best possible product to the
marketplace. These improvements can be implemented at any time with no obligation to change materials
previously sold. It is recommended that consumers periodically contact their distributors for most recent
documentation on purchased equipment.
This documentation may include attachments and optional equipment not available in your machine's package.
Please call your distributor for additional items that you may require.
Illustrations used throughout this manual are used only as a representation of the actual piece of equipment, and
may vary from the actual item.
Operation and Maintenance Manual
K1024537E
Serial Number 5001 and Up
November 2006
DL200
DL200TC
2. K1024537E
I
Table of Contents
Table of Contents
Safety..........................................................................................1-1
To the Operator of a DOOSAN Wheel Loader................................... 1-1
General Safety Essentials.................................................................. 1-4
Location of Safety Labels................................................................... 1-4
Unauthorized Modifications.............................................................. 1-13
General Hazard Information............................................................. 1-13
Before Starting Engine..................................................................... 1-22
Machine Operation........................................................................... 1-26
Maintenance .................................................................................... 1-34
Battery ............................................................................................. 1-46
Towing.............................................................................................. 1-48
Shipping and Transportation ............................................................ 1-49
Operating Controls ....................................................................2-1
Component Locations........................................................................ 2-2
Operator's Area.................................................................................. 2-6
Steering Console and Pedals ............................................................ 2-7
Front Instrument Panel..................................................................... 2-16
Right Side Switch Panel................................................................... 2-27
Various Cabin Locations .................................................................. 2-42
Heater and Air Conditioner Operation.............................................. 2-46
Stereo / CD Player (Optional) .......................................................... 2-51
Seat Adjustment............................................................................... 2-53
Seat Belt .......................................................................................... 2-55
Door Side Latch ............................................................................... 2-56
Arm Rest.......................................................................................... 2-57
Fuse Box/Relay/Engine Emergency Stop Switch ............................ 2-58
3. K1024537E
II
Table of Contents
Operation....................................................................................3-1
Instrument Panel Control Functions................................................... 3-1
New Machine Break-in Procedures ................................................... 3-1
Engine Start and Stop........................................................................ 3-2
Machine Travel................................................................................. 3-11
Machine Shut Down......................................................................... 3-14
F/R (Forward/Reverse) Travel Control System (Optional)................ 3-16
Additional Braking............................................................................ 3-17
Boom Raise Kick-out........................................................................ 3-18
Bucket Angle Indicator ..................................................................... 3-18
Boom Lower Kick-out (Optional) ...................................................... 3-19
Adjustment of Bucket Position Switch.............................................. 3-19
Towing Machine ............................................................................... 3-20
If Engine Stalls While Traveling........................................................ 3-21
Allowable Water Depth..................................................................... 3-22
Inspection, Maintenance and Adjustment...............................4-1
Basic Preventive Maintenance........................................................... 4-1
Safety When Servicing....................................................................... 4-4
Preventive Maintenance................................................................... 4-12
Table of Recommended Lubricants ................................................. 4-14
Fluid Capacities ............................................................................... 4-16
Lubrication and Service Chart ......................................................... 4-17
Maintenance Intervals...................................................................... 4-21
10 Hour / Daily Service .................................................................... 4-23
50 Hour / Weekly Service ................................................................ 4-33
250 Hour / Monthly Service ............................................................. 4-43
500 Hour / 3 Month Service ............................................................. 4-48
1,000 Hour / 6 Month Service .......................................................... 4-55
1,500 Hour / 9 Month Service .......................................................... 4-63
2,000 Hour / Yearly Service ............................................................. 4-65
12,000 Hour / Six Year Service........................................................ 4-71
Bolt Torque Chart............................................................................. 4-72
4. K1024537E
III
Table of Contents
Electrical System ............................................................................. 4-73
Engine Cooling System.................................................................... 4-75
Handling of Accumulator.................................................................. 4-77
Hydraulic Pressure Checks.............................................................. 4-78
Long Term Storage .......................................................................... 4-83
Parking Brake Adjustment................................................................ 4-84
Severe Conditions Maintenance ...................................................... 4-85
Tires................................................................................................. 4-86
Transmission Recalibration .............................................................. 4-89
Transportation............................................................................5-1
Loading and Unloading...................................................................... 5-1
Summary of Safety Precautions for Lifting......................................... 5-2
Troubleshooting.........................................................................6-1
Engine................................................................................................ 6-1
Hydraulic System............................................................................... 6-3
Travel System..................................................................................... 6-4
Steering ............................................................................................. 6-5
Braking............................................................................................... 6-6
Electrical System ............................................................................... 6-6
Specification ..............................................................................7-1
General Specifications....................................................................... 7-1
Working Range and Dimensions ....................................................... 7-4
Working Capacities............................................................................ 7-8
Approximate Weight of Workload Materials....................................... 7-8
Index ...........................................................................................8-1
Publication Request for Proposed Revision...........................9-1
5. OP000506
1-1
Safety
OP000506
1Safety
TO THE OPERATOR OF A
DOOSAN WHEEL LOADER
Please respect the importance of taking responsibility for your
own safety and that of other people who may be affected by your
actions.
The safety information on the following pages is organized into
the following sections:
1. “General Safety Essentials” on page 1-4
2. “Location of Safety Labels” on page 1-4
3. “Unauthorized Modifications” on page 1-13
4. “General Hazard Information” on page 1-13
5. “Before Starting Engine” on page 1-22
6. “Machine Operation” on page 1-26
7. “Maintenance” on page 1-34
8. “Battery” on page 1-46
9. “Towing” on page 1-48
10. “Shipping and Transportation” on page 1-49
DANGER!
Improper use of wheel loader could cause serious injury or
death. Before operating wheel loader, or performing
maintenance, operator or technician must read and
understand entire Operation and Maintenance Manual.
Any operation, maintenance, traveling or shipping methods
that do not follow safety guidelines printed in this manual
could cause serious injury or death.
6. OP000506
Safety
1-2
Learn Signal Words Used With Safety Alert
Symbol
The words "CAUTION," "WARNING," and "DANGER" used
throughout this manual and on decals on the machine indicate
degree of risk of hazards or unsafe practices. All three degrees
of risk indicate that safety is involved. Observe precautions
indicated whenever you see the Safety Alert "Triangle," no
matter which signal word appears next to the "Exclamation
Point" symbol.
SAFETY ALERT SYMBOL
Be Prepared – Get to Know All Operating and Safety
Instructions.
This is the Safety Alert Symbol. Wherever it appears – in
this manual or on safety signs on the machine – you must
be alert to potential threat of personal injury or accident.
Always observe safety precautions and follow
recommended procedures.
CAUTION!
This word is used on safety messages and safety labels and
indicates potential threat of a hazardous situation that, if
not avoided, could result in minor or moderate injury. It may
also be used to alert against a generally unsafe practice.
WARNING!
This word is used on safety messages and safety labels and
indicates potential threat of a hazardous situation that, if
not avoided, could result in serious injury or death. It may
also be used to alert against highly unsafe practice.
DANGER!
This word is used on safety messages and safety labels and
indicates an imminent hazard of a situation that, if not
avoided, is very likely to cause death or extremely serious
injury. It may also be used to alert against equipment that
may detonate or explode if handled or treated carelessly.
7. OP000506
1-3
Safety
Safety precautions are described in SAFETY from page 1-4 on.
DOOSAN cannot predict every circumstance that might involve a
potential hazard in operation and maintenance. Therefore the
safety messages in this manual and on the machine may not
include all possible safety precautions. If any procedures or
actions not specifically recommended or allowed in this manual
are used, you must be sure that you and others can do such
procedures and actions safely and without damaging the
machine. If you are unsure about the safety of any procedures,
contact a DOOSAN distributor.
8. OP000506
Safety
1-4
GENERAL SAFETY ESSENTIALS
Accessory Applications
The wheel loader has been designed primarily for moving earth
with a bucket. For use as a grapple or for other object handling,
contact DOOSAN. Lifting-work applications are permitted in
approved lift configuration, to rated capacity only, with no
side-loading (unless prohibited by local regulation). Do not use
machine for activities for which it was not intended. Do not use
bucket for lifting work, unless lift slings are used in approved
configuration.
LOCATION OF SAFETY LABELS
The operator should know and pay attention to the information
and warning plates/decals which are positioned on the machine.
There are several specific warning signs on this machine. The
exact location of hazards and the description of the hazards are
reviewed in this section.
Please become familiarized with all warning signs.
Make sure that all the warning signs are legible. Clean the
warning signs or replace the warning signs if you cannot read
the words. Replace the illustrations if the illustrations are not
visible. When you clean the warning signs, use a cloth, water
and soap. Do not use solvent, gasoline, or other harsh
chemicals to clean the safety signs. Solvents, gasoline, or other
harsh chemicals could loosen the adhesive that secures the
warning sign. Loose adhesive will allow the warning sign to fall
off.
Replace any safety sign that is damaged, or missing. If a safety
sign is attached to a part that is replaced, install a safety sign on
the replacement part.
10. OP000506
Safety
1-6
1. Warnings for Operation, Inspection
and Maintenance (4190-2545A,
190-00092)
2. Warnings for Cooling Fan (2190-3315,
190-00557)
CAUTION!
• Read manual and labels before
operation and maintenance. Follow
instructions and warnings in manual
and on labels on machine.
• Sound horn to alert people nearby
before operating and make sure all
persons are clear of area.
• Always make sure when leaving
operator's seat to:
• Lower bucket or other working
tools to ground.
• "LOCK" transmission selector in
"NEUTRAL."
• Set park brake.
• Turn starter switch "OFF." Remove key from switch.
• If hydraulic components and units are ABNORMAL, consult nearest DOOSAN dealer or
authorized service shop. Do not attempt to make an overhaul.
ACO1360L
WARNING!
Keep your hands away from the fan during
operation. Entanglement in the fan can cause
serious injury.
AMO0390L
11. OP000506
1-7
Safety
3. Warnings When Opening Engine Hood
(190-00095)
4. Warnings for Using Wheel Block
(4190-2547A, 190-00207)
WARNING!
Before opening hood, shut down engine.
ACO1420L
WARNING!
Block wheels to prevent machine movement
before disengaging park brake.
AMO0400L
12. OP000506
Safety
1-8
5. Warnings for Handling Accumulator
(190-00703, 190-00099)
Accumulator
The wheel loader pilot control system is equipped with an
accumulator. The accumulator will store a pressure charge that
may enable hydraulic controls to be activated for a brief period of
time after engine has been shut down. Activation of any controls
may enable selected function to operate under force of gravity.
When shutting machine down, lower front attachment to ground.
After engine has been shut down, turn key to "ON" position and
move joystick controls to release pressure in accumulator.
Remove key.
WARNING!
Explosion hazard:
• Keep away from flame.
• Do not weld or drill.
ACO1480L
CAUTION!
Any raised attachment will lower to ground if an
accumulator is holding a charge.
IMPORTANT
Refer to Shop Manual for service procedures. Do not
release any pilot lines until pressure within accumulator
has been released.
13. OP000506
1-9
Safety
6. Keep Out of Steering Turn Area
(4190-1992A, 190-00120)
7. Warnings for High Temperature
Hydraulic Oil (190-00691, 190-00097)
DANGER!
Keep out of steering turn area.
AMO0410L
WARNING!
HYDRAULIC OIL
To prevent hot oil from spurting out:
• Turn engine off.
• Allow oil to cool.
• Slowly loosen cap to relieve pressure
before removing.
ACO1410L
14. OP000506
Safety
1-10
8. Warnings for High Temperature
Coolant (190-00692, 190-00097)
9. Warnings for Battery Maintenance
(2190-2533A, 190-00100)
WARNING!
To prevent hot water from spurting out:
• Turn engine "OFF."
• Allow water to cool.
• Slowly loosen cap to relieve pressure
before removing.
ACO1410L
DANGER!
• Battery fumes can explode. Keep
sparks and flames away from
batteries.
• Always avoid storing metals like tools
or inflammable materials around or on
batteries. Explosion or fire can be
caused by short-circuiting batteries.
• Sulfuric acid in battery is poisonous. It
is strong enough to burn skin, eat
holes in clothing and cause blindness
if splashed in eyes.
If you spill acid on yourself:
1. Flush your skin with water.
2. Apply baking soda or lime to help
neutralize acid.
3. Flush your eyes with water for 10 - 15
minutes.
Get medical attention immediately.
ACO1400L
15. OP000506
1-11
Safety
10. Warnings for Performing Maintenance
On Front Attachment (4190-2546A,
190-00105)
11. Warnings to Use Safety Lock
(4190-1993, 190-00121)
DANGER!
To avoid injury, securely brace lift arm before
disassembly of valve or piping.
AMO0430L
WARNING!
Safety lock must be in "LOCK" position when
servicing pivot area or transporting machine.
AMO0440L
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. OP000506
1-13
Safety
UNAUTHORIZED
MODIFICATIONS
Any modification made without authorization or written approval
from DOOSAN can create a safety hazard, for which the
machine owner will be held responsible.
For safety's sake, replace all OEM parts with the correct
authorized or genuine DOOSAN part. For example, not taking
the time to replace fasteners, bolts or nuts with the correct
replacement parts could lead to a condition where the safety of
critical assemblies are dangerously compromised.
GENERAL HAZARD
INFORMATION
Safety Rules
Only trained and authorized personnel can operate and maintain
the machine.
Follow all safety rules, precautions and instructions when
operating or performing maintenance on the machine.
Do not operate the machine if you are not feeling well, if you are
taking medication that makes you feel sleepy, if you have been
drinking, or if you are suffering from emotional problems. These
problems will interfere with your sense of judgment in
emergencies and may cause accidents.
When working with another operator or with a person on work
site traffic duty, be sure that all personnel know the nature of the
work and understand all hand signals that are to be used.
Always observe strictly any other rules related to safety.
Safety Features
Be sure that all guards and covers are installed in their proper
position. Have guards and covers repaired immediately if
damaged.
Be sure that you understand the method of use of safety
features such as making sure you are knowledgeable of proper
use of the following: transmission lever neutral lock and the seat
belt.
Never remove any safety features. Always keep them in good
operating condition.
Failure to use safety features according to the instructions in the
Operation and Maintenance Manual could result in serious
bodily injury.
19. OP000506
Safety
1-14
Inside Operator's Cabin
When entering the operator's cabin, always remove all mud and
oil from the soles of your shoes. If you operate the accelerator
and brake pedals with mud or oil stuck to your shoes, your foot
may slip and this may cause a serious accident.
Clean grease and dirt from pedals and controls. This contributes
to safe operation. Cleaning also provides an opportunity to
inspect equipment. Minor damage can be repaired or corrected
before major problems result.
Keep cabin floor and consoles free of tools and personal items.
Do not stick suction pads to the window glass. Suction pads act
as a lens and may cause fire.
Do not leave lighters laying around the operator's cabin. If the
temperature inside the operator's cabin becomes high, there is a
danger that the lighter may explode.
Do not use cellular telephones inside the operator's cabin when
driving or operating the machine. There is a danger that this may
lead to an unexpected accident.
Never bring any dangerous objects such as flammable or
explosive items into the operator's cabin.
To ensure safety, do not use the radio or music headphones
when operating the machine. There is a danger that this may
lead to a serious accident.
When operating the machine, do not put your hands or head out
of the window.
When standing up from the operator's seat, always place
transmission neutral lock lever in the "LOCK" position and set
pilot cutoff switch to "O" (OFF) position. If you accidentally touch
the work equipment levers when they are not locked, the
machine may suddenly move and cause serious injury or
damage.
When leaving the machine, lower the work equipment
completely to the ground, set transmission neutral lock lever in
the "LOCK" position, set pilot cutoff switch to "O" (OFF) position,
"APPLY" parking brake and shut down engine. Use the key to
lock all the equipment. Always remove the key and take it with
you.
20. OP000506
1-15
Safety
Clothing and Personal Protective Items
Secure long hair and avoid loose clothing and jewelry. These
items have the tendency to catch on controls or protrude into
parts and cause serious injury or death.
Do not wear oily clothes. They are flammable.
Full eye protection, a hard hat, safety shoes and gloves may be
required at the work site.
While working on the machine, never use inadequate tools. They
could break or slip, causing injury, or they may not adequately
perform intended functions.
Breathing Masks, Ear Protection May Be
Required
Do not forget that some risks to your health may not be
immediately apparent. Exhaust gases and noise pollution may
not be visible, but these hazards can cause disabling or
permanent injuries.
NOTE: The equivalent continuous A-weighted sound
pressure level at the workstation for this machine is
76 dB (A).
Measurement is obtained on a dynamic machine
following the procedures and cabin conditions as
described in ISO 6396.
NOTE: The guaranteed sound power level emitted by the
machinery for this machine is 104 dB (A).
Measurement is obtained on a dynamic machine with
the procedures as described in 2000/14/EC.
Vibration Level Information
Hands/Arms: The weighted root mean square acceleration to
which the hands/arms are subjected, is less than 2.5 m/s2
.
Whole body: The weighted root mean square acceleration to
which the whole body is subjected, is less than 0.5 m/s2
.
Measurements are obtained on a representative machine, using
measuring procedures as described in the following standard:
ISO 2631/1. ISO 5349 and SAE J1166.
HAOA020L
Figure 2