This document is a service manual for a TH255C model forklift. It provides safety information and instructions, specifications, maintenance schedules and procedures for various components of the forklift including the boom, cab, axles, transmission, and other systems. The manual is intended to guide maintenance and repair of the forklift. It details the intended use, maintenance, and troubleshooting of each major component to ensure safe and proper operation.
New holland t8.320 continuously variable transmission (cvt) tractor service r...fujdwjjsekkemme
The document is a service manual that provides specifications and repair instructions for engines and other components of tractor models T8.320, T8.350, T8.380, T8.410, and T8.435. It contains sections on the engine and crankcase, cylinder heads, air/fuel systems, lubrication systems, cooling systems, and electrical systems. Repair procedures are listed by component and illustrated with diagrams.
Case ih magnum 340 powershift transmission (pst) tractor service repair manua...fusjfjskekme
This document is a service manual for Case IH Magnum tractors that provides information on engine systems, transmission, axles, hydraulics, electrical systems, and other components. It contains sections with part numbers, diagrams, and instructions for repair and maintenance. Safety messages are included throughout to prevent personal injury during operation or service of the machines.
This document is a service manual for CVT 6170, CVT 6185, CVT 6205, CVT 6215, and CVT 6230 tractors. It contains part numbers, links the tractors to their engine models, and provides a table of contents that lists the systems and components covered in each section of the manual, including the engine, transmission, axles, brakes, hydraulics, pneumatics, hitches, frames, steering, wheels, climate control, and electrical systems. The manual is intended to provide technical information and servicing instructions for mechanics.
New holland ts125 a tractor service repair manualujdjjkskkmdme
This document provides sections and page numbers for the repair manual for tractor models TS100A, TS110A, TS115A, TS125A, TS130A, TS135A and T6010, T6020, T6030, T6050, T6070. It lists 15 sections that are included in the repair manual, such as the engine, clutch, transmission, braking system, and electrical system. It also provides some notes for locating repair information for the new T6000 tractor models within the manual.
New holland boomer 40 rops compact tractor service repair manualfujsjefjkskemm
This document is a service manual for Boomer 40 and 50 compact tractors, providing technical information to properly service the models. The manual contains sections on the engine, clutch, transmission, front and rear axle systems, hydrostatic drive, power take-off, brakes, hydraulic systems, hitches/drawbars, steering, wheels, electrical systems, and platform/cab/bodywork. Safety notices indicate that only qualified dealership personnel should perform repairs, using the instructions and special tools provided.
Case ih magnum 235 tractor service repair manual (pin zbrd07000 and after)fujsjejfkskekem
This document provides instructions for removing the engine from a tractor. It describes disconnecting various engine components like hydraulic and cooling lines, electrical harnesses, and fuel lines. 26 steps are listed to fully remove and disconnect the engine from the tractor. Safety precautions and notes are also provided throughout the instructions.
Liebherr r964 c 1447 hydraulic excavator service repair manualfjjskekrtfsmem
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1377 hydraulic excavator service repair manualfjjskekrtfsmem
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
New holland t8.320 continuously variable transmission (cvt) tractor service r...fujdwjjsekkemme
The document is a service manual that provides specifications and repair instructions for engines and other components of tractor models T8.320, T8.350, T8.380, T8.410, and T8.435. It contains sections on the engine and crankcase, cylinder heads, air/fuel systems, lubrication systems, cooling systems, and electrical systems. Repair procedures are listed by component and illustrated with diagrams.
Case ih magnum 340 powershift transmission (pst) tractor service repair manua...fusjfjskekme
This document is a service manual for Case IH Magnum tractors that provides information on engine systems, transmission, axles, hydraulics, electrical systems, and other components. It contains sections with part numbers, diagrams, and instructions for repair and maintenance. Safety messages are included throughout to prevent personal injury during operation or service of the machines.
This document is a service manual for CVT 6170, CVT 6185, CVT 6205, CVT 6215, and CVT 6230 tractors. It contains part numbers, links the tractors to their engine models, and provides a table of contents that lists the systems and components covered in each section of the manual, including the engine, transmission, axles, brakes, hydraulics, pneumatics, hitches, frames, steering, wheels, climate control, and electrical systems. The manual is intended to provide technical information and servicing instructions for mechanics.
New holland ts125 a tractor service repair manualujdjjkskkmdme
This document provides sections and page numbers for the repair manual for tractor models TS100A, TS110A, TS115A, TS125A, TS130A, TS135A and T6010, T6020, T6030, T6050, T6070. It lists 15 sections that are included in the repair manual, such as the engine, clutch, transmission, braking system, and electrical system. It also provides some notes for locating repair information for the new T6000 tractor models within the manual.
New holland boomer 40 rops compact tractor service repair manualfujsjefjkskemm
This document is a service manual for Boomer 40 and 50 compact tractors, providing technical information to properly service the models. The manual contains sections on the engine, clutch, transmission, front and rear axle systems, hydrostatic drive, power take-off, brakes, hydraulic systems, hitches/drawbars, steering, wheels, electrical systems, and platform/cab/bodywork. Safety notices indicate that only qualified dealership personnel should perform repairs, using the instructions and special tools provided.
Case ih magnum 235 tractor service repair manual (pin zbrd07000 and after)fujsjejfkskekem
This document provides instructions for removing the engine from a tractor. It describes disconnecting various engine components like hydraulic and cooling lines, electrical harnesses, and fuel lines. 26 steps are listed to fully remove and disconnect the engine from the tractor. Safety precautions and notes are also provided throughout the instructions.
Liebherr r964 c 1447 hydraulic excavator service repair manualfjjskekrtfsmem
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1377 hydraulic excavator service repair manualfjjskekrtfsmem
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r960 demolition 1787 hydraulic excavator service repair manualfjjskekrtfsmem
This document is a service manual that covers maintenance and repair for various systems of an industrial machine. It includes sections on technical data, maintenance procedures, drive systems, cooling systems, hydraulics, electrical systems, gearboxes, and other components. The manual provides instructions and specifications to service the machine.
Liebherr r920 compact hydraulic excavator service repair manualfjjskekrtfsmem
This document is a service manual for an MJFCIFSS machine. It contains sections covering technical data, maintenance instructions, and descriptions of the drive group, cooling system, hydraulics, electrical system, travel gearbox, steel parts, operator cab, lubrication system, slewing gearbox, and diagnosis procedures. The manual is copyrighted by MJFCIFSS.
Liebherr r918 compact hydraulic excavator service repair manualfjjskekrtfsmem
This document is a service manual for an MJFCIFSS machine. It contains sections covering technical data, maintenance instructions, and descriptions of the drive group, cooling system, hydraulics, electrical system, travel gearbox, steel parts, operator cab, lubrication system, slewing gearbox, and diagnosis procedures. The manual is copyrighted by MJFCIFSS.
Liebherr er 932 hydraulic excavator service repair manualfjjskekrtfsmem
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
Jcb js175 w wheeled excavator service repair manual (from 2143159 to 2143459;...fjjskekrtfsmem
This service manual section provides information about servicing the engine on JCB wheeled excavators. It includes identification of major engine components both internal and external. Safety precautions are outlined regarding working on hot components and ensuring proper PPE. Technical specifications of the engine such as cylinder arrangement, displacement, valve clearances and lubricating oil pressure parameters are provided.
Caterpillar cat th580 b telehandler operator and maintenance manual sn tbj001...fjjskekrtfsmem
This document is an operation and maintenance manual for a TH580B telehandler. It contains important safety information and instructions for operating, maintaining, and repairing the machine safely and properly. The manual instructs the operator to read it fully before operating the machine and warns that improper operation or maintenance can result in injury or death. It provides guidelines for safe practices, identifies hazard areas, and lists maintenance procedures and intervals to keep the machine in good working condition.
Jcb js160 w wheeled excavator service repair manual (from 2143159 to 2143459;...fjjskekrtfsmem
This document provides information about servicing JCB wheeled excavators. It contains sections on the machine, attachments, body, operator station, HVAC, engine, fuel/exhaust, cooling, brakes, steering, driveline, hydraulics, and electrical systems. The section on the engine provides details on health and safety, technical data, component identification, operation, maintenance procedures, and storage for the engine. It includes diagrams labeling external and internal engine parts and describes the four-stroke operating cycle.
Caterpillar cat th406 c telehandler operator and maintenance manualfjjskekrtfsmem
This document provides an operation and maintenance manual for several models of JLG telehandlers. It contains important safety information and instructions for pre-operation inspection, operation of controls and indicators, and maintenance procedures. The manual should be kept with the machine at all times. Operators must be trained and qualified, and follow all safety guidelines and procedures contained in this manual. Unauthorized modifications could affect safety compliance.
Caterpillar cat th360 b telehandler operator and maintenance manual sn tbh001...fjjskekrtfsmem
This operation and maintenance manual provides important safety information, operating instructions, maintenance instructions, and specifications for a TH360B Telehandler machine. The manual instructs operators on safe operation, daily inspection, machine controls, monitoring systems, engine starting, parking, transportation, and maintenance procedures on a periodic schedule. It identifies safety labels and messages throughout the machine and warns that unauthorized modifications can affect safety certifications.
Caterpillar cat th255 c telehandler service repair manual sn jk300150 to presentfjjskekrtfsmem
This document is a service manual for a TH255C model forklift. It provides safety information and instructions, specifications, maintenance schedules and procedures for various components of the forklift including the boom, cab, axles, transmission and more. The manual is intended to guide maintenance and repair of the forklift. Serial numbers indicated apply to the models covered.
Caterpillar cat m316 d wheeled excavator (prefix p6k) service repair manual (...fjjskekrtfsmem
This document provides disassembly instructions for the final drive carriers, hubs, and brakes of the front and rear axles of a M316D Wheeled Excavator. It lists the required tools and presents step-by-step instructions and illustrations for removing components such as carrier housings, planetary gears, pistons, discs, seals, bearings, and other parts. Safety notices are included to handle fluids and released spring forces properly during the disassembly process.
Jcb js145 w wheeled excavator service repair manual (from 2143159 to 2143459;...fjjskekrtfsmem
This service manual section contains information about the JCB ecoMax engine, including its basic description, identification of main internal components, technical data, health and safety considerations, and procedures for draining/filling, cleaning, checking, removing/installing, and storing/recommissioning the engine. The manual provides diagrams and descriptions to aid in servicing the engine.
Jcb js115 excavator service repair manual sn 2397465 and upfjjskekrtfsmem
The document provides a service manual for excavator tracks. It includes sections on track components, measuring wear using technical data tables, adjusting tracks, removing and installing tracks, and storing tracks. Procedures are provided for measuring wear of links, pins, bushes and pitch to determine wear percentages and necessary maintenance. Track tension should be checked regularly and adjusted according to specifications to maximize service life.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...fjjskekrtfsmem
The document provides instructions for servicing a D6H track-type tractor. It begins by stating that the tractor must be on level, hard ground before separating the track roller frames. It then provides detailed steps for removing and installing the track roller frames and idlers. The removal process involves using various tools to support the frame and separate components. Reinstallation follows the reverse process.
Jcb 540 200 telescopic handler service repair manual sn from 2460601 onwardsfjjskekrtfsmem
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine body and framework, operator station, engine, fuel and exhaust, cooling, brake, steering, hydraulic and electrical systems. The engine section provides technical data and instructions for servicing parts like the valves, connecting rods, pistons, and more. Proper safety procedures and use of specialized tools are emphasized throughout.
Jcb 540 170 telescopic handler service repair manual sn from 2902000 onwardsfjjskekrtfsmem
This service manual provides instructions for servicing the loadall rough terrain variable reach truck. It contains sections on the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The section summarized focuses on servicing the engine valves and connecting rod big-end bearings. It provides removal and installation instructions, component identification diagrams, and technical specifications for the valves and instructions to check the big-end bearings for wear. Safety information is also provided to ensure the work is performed correctly.
Jcb 536 60 tier 4 telescopic handler service repair manual sn from 2336575 on...fjjskekrtfsmem
This document provides service and repair instructions for fuel injectors in JCB Loadall vehicles. It describes injector components and identification, includes a check procedure using diagnostic tools, and outlines removal and installation steps. Special tools are required for tasks like leak testing and installing injector seals. Torque specifications are provided for tightening injector clamps and sleeves.
Jcb 535 95 tier 4 telescopic handler service repair manual sn from 2902000 on...fjjskekrtfsmem
This document provides service and repair instructions for fuel injectors in JCB Loadall vehicles. It describes injector components and identification, includes a check procedure using diagnostic tools, and outlines removal and installation steps. Special tools are required for tasks like leak testing and installing injector seals. Torque specifications are provided for tightening injector clamps and sleeves.
Jcb 411 ht, 413s, 417ht wheel loader service repair manual from 2094871 to 20...fjjskekrtfsmem
This service manual provides instructions and technical specifications for JCB machines 411HT, 413S, and 417HT. It contains sections covering the machine, attachments, body, operator station, HVAC, engine, fuel/exhaust systems, cooling, brakes, steering, driveline, hydraulics, and electrical systems. The document reviewed the exhaust system components, including the inlet manifold, outlet manifold, turbocharger, and provided removal and installation instructions as well as checks for condition and proper operation. Safety warnings were provided throughout regarding exhaust gases, sparks, hot components, and hazardous atmospheres.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Liebherr r960 demolition 1787 hydraulic excavator service repair manualfjjskekrtfsmem
This document is a service manual that covers maintenance and repair for various systems of an industrial machine. It includes sections on technical data, maintenance procedures, drive systems, cooling systems, hydraulics, electrical systems, gearboxes, and other components. The manual provides instructions and specifications to service the machine.
Liebherr r920 compact hydraulic excavator service repair manualfjjskekrtfsmem
This document is a service manual for an MJFCIFSS machine. It contains sections covering technical data, maintenance instructions, and descriptions of the drive group, cooling system, hydraulics, electrical system, travel gearbox, steel parts, operator cab, lubrication system, slewing gearbox, and diagnosis procedures. The manual is copyrighted by MJFCIFSS.
Liebherr r918 compact hydraulic excavator service repair manualfjjskekrtfsmem
This document is a service manual for an MJFCIFSS machine. It contains sections covering technical data, maintenance instructions, and descriptions of the drive group, cooling system, hydraulics, electrical system, travel gearbox, steel parts, operator cab, lubrication system, slewing gearbox, and diagnosis procedures. The manual is copyrighted by MJFCIFSS.
Liebherr er 932 hydraulic excavator service repair manualfjjskekrtfsmem
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
Jcb js175 w wheeled excavator service repair manual (from 2143159 to 2143459;...fjjskekrtfsmem
This service manual section provides information about servicing the engine on JCB wheeled excavators. It includes identification of major engine components both internal and external. Safety precautions are outlined regarding working on hot components and ensuring proper PPE. Technical specifications of the engine such as cylinder arrangement, displacement, valve clearances and lubricating oil pressure parameters are provided.
Caterpillar cat th580 b telehandler operator and maintenance manual sn tbj001...fjjskekrtfsmem
This document is an operation and maintenance manual for a TH580B telehandler. It contains important safety information and instructions for operating, maintaining, and repairing the machine safely and properly. The manual instructs the operator to read it fully before operating the machine and warns that improper operation or maintenance can result in injury or death. It provides guidelines for safe practices, identifies hazard areas, and lists maintenance procedures and intervals to keep the machine in good working condition.
Jcb js160 w wheeled excavator service repair manual (from 2143159 to 2143459;...fjjskekrtfsmem
This document provides information about servicing JCB wheeled excavators. It contains sections on the machine, attachments, body, operator station, HVAC, engine, fuel/exhaust, cooling, brakes, steering, driveline, hydraulics, and electrical systems. The section on the engine provides details on health and safety, technical data, component identification, operation, maintenance procedures, and storage for the engine. It includes diagrams labeling external and internal engine parts and describes the four-stroke operating cycle.
Caterpillar cat th406 c telehandler operator and maintenance manualfjjskekrtfsmem
This document provides an operation and maintenance manual for several models of JLG telehandlers. It contains important safety information and instructions for pre-operation inspection, operation of controls and indicators, and maintenance procedures. The manual should be kept with the machine at all times. Operators must be trained and qualified, and follow all safety guidelines and procedures contained in this manual. Unauthorized modifications could affect safety compliance.
Caterpillar cat th360 b telehandler operator and maintenance manual sn tbh001...fjjskekrtfsmem
This operation and maintenance manual provides important safety information, operating instructions, maintenance instructions, and specifications for a TH360B Telehandler machine. The manual instructs operators on safe operation, daily inspection, machine controls, monitoring systems, engine starting, parking, transportation, and maintenance procedures on a periodic schedule. It identifies safety labels and messages throughout the machine and warns that unauthorized modifications can affect safety certifications.
Caterpillar cat th255 c telehandler service repair manual sn jk300150 to presentfjjskekrtfsmem
This document is a service manual for a TH255C model forklift. It provides safety information and instructions, specifications, maintenance schedules and procedures for various components of the forklift including the boom, cab, axles, transmission and more. The manual is intended to guide maintenance and repair of the forklift. Serial numbers indicated apply to the models covered.
Caterpillar cat m316 d wheeled excavator (prefix p6k) service repair manual (...fjjskekrtfsmem
This document provides disassembly instructions for the final drive carriers, hubs, and brakes of the front and rear axles of a M316D Wheeled Excavator. It lists the required tools and presents step-by-step instructions and illustrations for removing components such as carrier housings, planetary gears, pistons, discs, seals, bearings, and other parts. Safety notices are included to handle fluids and released spring forces properly during the disassembly process.
Jcb js145 w wheeled excavator service repair manual (from 2143159 to 2143459;...fjjskekrtfsmem
This service manual section contains information about the JCB ecoMax engine, including its basic description, identification of main internal components, technical data, health and safety considerations, and procedures for draining/filling, cleaning, checking, removing/installing, and storing/recommissioning the engine. The manual provides diagrams and descriptions to aid in servicing the engine.
Jcb js115 excavator service repair manual sn 2397465 and upfjjskekrtfsmem
The document provides a service manual for excavator tracks. It includes sections on track components, measuring wear using technical data tables, adjusting tracks, removing and installing tracks, and storing tracks. Procedures are provided for measuring wear of links, pins, bushes and pitch to determine wear percentages and necessary maintenance. Track tension should be checked regularly and adjusted according to specifications to maximize service life.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...fjjskekrtfsmem
The document provides instructions for servicing a D6H track-type tractor. It begins by stating that the tractor must be on level, hard ground before separating the track roller frames. It then provides detailed steps for removing and installing the track roller frames and idlers. The removal process involves using various tools to support the frame and separate components. Reinstallation follows the reverse process.
Jcb 540 200 telescopic handler service repair manual sn from 2460601 onwardsfjjskekrtfsmem
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine body and framework, operator station, engine, fuel and exhaust, cooling, brake, steering, hydraulic and electrical systems. The engine section provides technical data and instructions for servicing parts like the valves, connecting rods, pistons, and more. Proper safety procedures and use of specialized tools are emphasized throughout.
Jcb 540 170 telescopic handler service repair manual sn from 2902000 onwardsfjjskekrtfsmem
This service manual provides instructions for servicing the loadall rough terrain variable reach truck. It contains sections on the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The section summarized focuses on servicing the engine valves and connecting rod big-end bearings. It provides removal and installation instructions, component identification diagrams, and technical specifications for the valves and instructions to check the big-end bearings for wear. Safety information is also provided to ensure the work is performed correctly.
Jcb 536 60 tier 4 telescopic handler service repair manual sn from 2336575 on...fjjskekrtfsmem
This document provides service and repair instructions for fuel injectors in JCB Loadall vehicles. It describes injector components and identification, includes a check procedure using diagnostic tools, and outlines removal and installation steps. Special tools are required for tasks like leak testing and installing injector seals. Torque specifications are provided for tightening injector clamps and sleeves.
Jcb 535 95 tier 4 telescopic handler service repair manual sn from 2902000 on...fjjskekrtfsmem
This document provides service and repair instructions for fuel injectors in JCB Loadall vehicles. It describes injector components and identification, includes a check procedure using diagnostic tools, and outlines removal and installation steps. Special tools are required for tasks like leak testing and installing injector seals. Torque specifications are provided for tightening injector clamps and sleeves.
Jcb 411 ht, 413s, 417ht wheel loader service repair manual from 2094871 to 20...fjjskekrtfsmem
This service manual provides instructions and technical specifications for JCB machines 411HT, 413S, and 417HT. It contains sections covering the machine, attachments, body, operator station, HVAC, engine, fuel/exhaust systems, cooling, brakes, steering, driveline, hydraulics, and electrical systems. The document reviewed the exhaust system components, including the inlet manifold, outlet manifold, turbocharger, and provided removal and installation instructions as well as checks for condition and proper operation. Safety warnings were provided throughout regarding exhaust gases, sparks, hot components, and hazardous atmospheres.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
6. Safety Practices
1-2 31200927 TH255C
1.1 INTRODUCTION
This service manual provides general directions for
accomplishing service and repair procedures. Following the
procedures in this manual will help assure safety and
equipment reliability.
Read, understand and follow the information in this manual,
and obey all locally approved safety practices, procedures,
rules, codes, regulations and laws.
These instructions cannot cover all details or variations in the
equipment, procedures, or processes described, nor provide
directions for meeting every possible contingency during
operation, maintenance, or testing. When additional
information is desired consult the local Caterpillar Dealer.
Many factors contribute to unsafe conditions: carelessness,
fatigue, overload, inattentiveness, unfamiliarity, even drugs
and alcohol, among others. For optimal safety, encourage
everyone to think, and to act, safely.
Appropriate service methods and proper repair procedures
are essential for the safety of the individual doing the work,
for the safety of the operator, and for the safe, reliable
operation of the machine. All references to the right side, left
side, front and rear are given from the operator’s seat looking
in a forward direction.
Supplementary information is available on SIS Web.
1.2 DISCLAIMER
All information in this manual is based on the latest product
information available at the time of publication. The
Manufacturer reserves the right to make changes and
improvements to its products, and to discontinue the
manufacture of any product, at its discretion at any time
without public notice or obligation.
1.3 OPERATION & MAINTENANCE MANUAL
The mechanic must not operate the machine until the
Operation & Maintenance Manual has been read and
understood, training has been accomplished and operation
of the machine has been completed under the supervision of
an experienced and qualified operator.
An Operation & Maintenance Manual is supplied with each
machine and must be kept in the manual holder located in
the cab. In the event that the Operation & Maintenance
Manual is missing, consult the local Service Dealer before
proceeding.
1.4 DO NOT OPERATE TAGS
Place Do Not OperateTags onthe ignition key switch and the
steering wheel before attempting to perform any service or
maintenance. Remove key and disconnect battery leads.
1.5 SAFETY INFORMATION
To avoid possible death or injury, carefully read, understand
and comply with all safety messages.
In the event of an accident, know where to obtain medical
assistance and how to use a first-aid kit and fire extinguisher/
fire suppression system. Keep emergency telephone
numbers (fire department, ambulance, rescue
squad/paramedics, police department, etc.) nearby. If
working alone, check with another person routinely to help
assure personal safety.
1.5.1 Safety Alert System and Signal Words
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNINGindicates a potentiallyhazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
DANGER
WARNING
CAUTION
7. 1-3
Safety Practices
TH255C 31200927
1.6 SAFETY INSTRUCTIONS
Following are general safety statements to consider BEFORE
performing maintenance procedures on the telehandler.
Additional statements related to specific tasks and
procedures are located throughout this manual and are
listed prior to any work instructions to provide safety
information before the potential of a hazard occurs.
Forallsafetymessages,carefullyread,understandandfollow
the instructions BEFORE proceeding.
1.6.1 Personal Hazards
PERSONAL SAFETY GEAR: Wear all the protective clothing
and personal safety gear necessary to perform the job safely.
This might include heavy gloves, safety glasses or goggles,
filter mask or respirator, safety shoes or a hard hat.
LIFTING: NEVER lift a heavy object without the help of at
least one assistant or a suitable sling and hoist.
1.6.2 Equipment Hazards
LIFTING OF EQUIPMENT: Before using any lifting equipment
(chains, slings, brackets, hooks, etc.), verify that it is of the
proper capacity, in good working order, and is properly
attached.
NEVER stand or otherwise become positioned under a
suspended load or under raised equipment. The load or
equipment could fall or tip.
DO NOT use a hoist, jack or jack stands only to support
equipment. Always support equipment with the proper
capacity blocks or stands properly rated for the load.
HAND TOOLS: Always use the proper tool for the job; keep
tools clean and in good working order, and use special
service tools only as recommended.
1.6.3 General Hazards
SOLVENTS: Only use approved solvents that are known to be
safe for use.
HOUSEKEEPING: Keep the work area and operator’s cab
clean, and remove all hazards (debris, oil, tools, etc.).
FIRST AID: Immediately clean, dress and report all injuries
(cuts, abrasions, burns, etc.), no matter how minor the injury
may seem. Know the location of a First Aid Kit, and know how
to use it.
CLEANLINESS: Wear eye protection and clean all
components with a high-pressure or steam cleaner before
attempting service.
When removing hydraulic components, plug hose ends and
connections to prevent excess leakage and contamination.
Place a suitable catch basin beneath the machine to capture
fluid run-off.
It is good practice to avoid pressure-washing electrical/
electronic components. In the event pressure-washing the
machine is needed, ensure machine is shut down before
pressure-washing. Should pressure-washing be utilized to
wash areas containing electrical/electronic components, it is
recommended a maximum pressure of 750 psi (52 bar) at a
minimum distance of 12 in (30,5 cm) away from these
components. If electrical/electronic components are
sprayed, spraying must not be direct and for brief time
periods to avoid heavy saturation, Check and obey all
Federal, State and/or Local regulations regarding waste
storage, disposal and recycling.
8. Safety Practices
1-4 31200927 TH255C
1.6.4 Operational Hazards
ENGINE: Stop the engine before performing any service
unless specifically instructed otherwise.
VENTILATION: Avoid prolonged engine operation in
enclosed areas without adequate ventilation.
SOFT SURFACES AND SLOPES: NEVER work on a machine
thatis parked on a soft surface orslope.Themachinemust be
on a hard level surface, with the wheels blocked before
performing any service.
FLUID TEMPERATURE: NEVER work on a machine when
engine, cooling or hydraulic systems are hot. Hot
components and fluids can cause severe burns. Allow
systems to cool before proceeding.
FLUID PRESSURE: Before loosening any hydraulic or diesel
fuel component, hose or tube, turn the engine OFF. Wear
heavy, protective gloves and eye protection. NEVER check
for leaks using any part of your body; use a piece of
cardboard or wood instead. If injured, seek medical attention
immediately. Diesel fluid leaking under pressure can
explode. Hydraulic fluid and diesel fuel leaking under
pressure can penetrate the skin, cause infection, gangrene
and other serious personal injury.
Engine fuel lines are pressurized. DO NOT attempt repairs
unless specific training has been completed. Refer to the
engine manufacturers’ manual for specific details
concerning the fuel system.
Relieve all pressure before disconnecting any component,
part, line or hose. Slowly loosen parts and allow release of
residual pressure before removing any part or component.
Before starting the engine or applying pressure, use
components, parts, hoses and pipes that are in good
condition, connected properly and are tightened to the
proper torque. Capture fluid in an appropriate container and
dispose of in accordance with prevailing environmental
regulations.
COOLANT SYSTEM CAP: The cooling system is under
pressure, and escaping coolant can cause severe burns and
eye injury. To prevent personal injury, NEVER remove the
coolant system cap while the cooling system is hot. Wear
safety glasses. Turn the coolant system cap to allow pressure
to escape before removing the cap completely. Failure to
follow the safety practices could result in death or serious
injury.
FLUID FLAMABILTITY: DO NOT service the fuel or hydraulic
systems near an open flame, sparks or smoking materials.
Properly disconnect battery prior to servicing the fuel or
hydraulic systems.
NEVER drain or store fluids in an open container. Engine fuel
and hydraulic fluid are flammable and can cause a fire and/or
explosion.
DO NOT mix gasoline or alcohol with diesel fuel. The mixture
can cause an explosion.
PRESSURE TESTING: When conducting any test, only use test
equipment that is correctly calibrated and in good condition.
Use the correct equipment in the proper manner, and make
changes or repairs as indicated by the test procedure to
achieve the desired result.
LEAVING MACHINE: Lower the forks or attachment to the
ground before leaving the machine.
TIRES: Always keep tires inflated to the proper pressure to
help prevent tipover. DO NOT over-inflate tires.
NEVER use mismatched tire types, sizes or ply ratings.
Always use matched sets according to machine
specifications.
MAJORCOMPONENTS:Neveralter,remove,orsubstituteany
items such as counterweights, tires, batteries or other items
that may reduce or affect the overall weight or stability of the
machine.
BATTERY: DO NOT charge a frozen battery. Charging a frozen
battery may cause it to explode. Allow the battery to thaw
before jump-starting or connecting a battery charger.
1.7 SAFETY DECALS
Check that all safety decals are present and readable on the
machine. Refer to the Operation & Safety Manual supplied
with machine for information.
11. General Information and Specifications
TH255C 31200927 2-3
2.1 REPLACEMENT PARTS AND WARRANTY
INFORMATION
Before ordering parts or initiating service inquiries, make
note of the machine serial number. The machine serial
number plate (1) is located as indicated in the figure.
Note: The replacement of any part on this machine with any
other than factory authorized replacement parts can adversely
affect the performance, durability, or safety of the machine,
and will void the warranty. Caterpillar disclaims liability for
any claims or damages, whether regarding property damage,
personal injury or death arising out of the use of unauthorized
replacement parts.
A warranty registration form must be filled out by the
Caterpillar Dealer.
Registration activates the warranty period and helps to
assure that warranty claims are promptly processed to
guarantee full warranty service.
MY8351
1
12. General Information and Specifications
31200927 TH255C2-4
2.2 SPECIFICATIONS
2.2.1 Travel Speed
2.2.2 Hydraulic Cylinder Performance Specifications
Note: Machine with no load, engine at full throttle, hydraulic oil above 15.6° C (60° F) minimum, engine at operating temperature.
2.2.3 Electrical System
Note: Refer to Section 9.3, “Fuses and Relays”, for more information.
2.2.4 Steering Angle Specification
Tires Approximate Speed
12–16.50 (305/70D16.5) 15 mph (24 km/h)
14–17.50 (355/70D17.5) 17 mph (27 km/h)
10.5–18 17 mph (27 km/h)
Function
Approximate Times (sec.)
ANSI CE & AUS
Boom Extend (Boom Level) 6.7 6.7
Boom Retract 3.8 3.5
Boom Lift 6.8 6.6
Boom Lower 4.6 8.2
Quick Attach—UP 2.0 1.8
Quick Attach—DOWN 2.5 2.3
Battery
Type, Rating 12 BCI, Negative (-) Ground, Maintenance Free
Cold Cranking Amps @ 0° F (-18° C) 950
Cranking Amps @ 32° F (-18° C) 1190
Reserve Capacity Minutes @ 25 Amps 185
Group/Series Group 31
Alternator 14V, 95 Amps
Model Angle (in Degrees)
TH255C 37
13. General Information and Specifications
TH255C 31200927 2-5
2.2.5 Engine Performance Specifications
2.2.6 Tires
Note: Standard wheel lug nut torque is 220 lb-ft (300 Nm).
Note: Pressures for Foam filled tires are for initial fill ONLY.
Description
Engine Make/Model CAT TD L4
Displacement 177 in³ (2.9 L)
Low Idle 975 - 1075 rpm
High Idle 2300 - 2400 rpm
Horsepower 74 HP (55 kW) @ 2300 rpm
Peak Torque 192 lb-ft (260 Nm) @ 1800 rpm
Fuel Delivery Fuel Injection
Air Cleaner Dry Type, Replaceable Primary and Safety Elements
Size Tire Type
Minimum Ply/
Star Rating
Fill Type Pressure
12–16.50 (305/70D16.5)
Duraforce
DT
Bias 12 Ply
Pneumatic 80 psi (5,5 bar)
Foam - Approximately 220 lb (100 kg)
14–17.50 (355/70D17.5) Outrigger Bias 14 Ply
Pneumatic 70 psi (4,8 bar)
Foam - Approximately 220 lb (100 kg)
10.5–18 MPT-01 TL Bias 16 Ply Pneumatic 87 psi (6,0 bar)
33x12–20 Non–Marking (White)
14. General Information and Specifications
31200927 TH255C2-6
2.3 FLUIDS, LUBRICANTS AND CAPACITIES
2.3.1 Fluids
a. Prior to SN JK201000
Compartment or
System
Type and Classification Viscosities
Ambient Temperature Range
°F °C
Min Max Min Max
Engine Crankcase
CAT DEO-ULS
API CJ-4 Plus
SAE 0W-20 -40 50 -40 10
SAE 0W-30 -40 86 -40 30
SAE 0W-40 -40 104 -40 40
SAE 5W-30 -22 86 -30 30
SAE 5W-40 -22 122 -30 50
SAE 10W-30 0 104 -18 40
SAE 10W-40 0 122 -18 50
SAE 15W-40 15 122 -9.5 50
Axle Differential
and
Wheel End
CAT Synthetic Gear Oil (GO)* SAE 75W-140 -22 113 -30 45
CAT Gear Oil (GO)* SAE 80W-90 -10 120 -23 49
CAT Gear Oil (GO)* SAE 85W-140 10 120 -12 59
CAT TDTO-TMS* Cat TDTO-TMS -4 122 -20 50
API GL4 with LS Additives
or
API GL5 with LS Additives
SAE90
SAE90LS
32 115 0 46
80W-90 -4 115 -20 46
75W-90 -40 115 -40 46
75W -40 50 -40 10
Hydraulic
and
Brake
Systems
CAT TDTO
CAT TDTO-TMS
CAT Arctic TDTO SYN
commercial TO-4
SAE 0W-20 -40 104 -40 40
SAE 0W-30 -40 104 -40 40
SAE 5W-30 -22 104 -30 40
SAE 5W-40 -22 104 -30 40
SAE 10W -4 104 -20 40
SAE 30 50 122 10 50
SAE 10W-30 -4 104 -20 40
SAE 15W-40 5 122 -15 50
Cat TDTO-TMS -4 122 -20 50
Boom Wear Pad
Grease
CAT Advanced 3Moly NLGI Grade 2 -4 104 -20 40
15. General Information and Specifications
TH255C 31200927 2-7
Note: Friction Modifier (197-0017) required for axle differentials, refer to Section 2.3.2, “Capacities”.
Grease Fittings Extreme Pressure Grease
NLGI Grade 2 EP
or
NLGI Grade 3 EP
with Moly Additive
5 122 -15 50
Engine Coolant
CAT Extended Life Coolant
(ELC)
50/50 Mix
Fuel
EN 590
ASTM D 975 Grade 1-D
ASTM D 975 Grade 2-D
(Maximum B5 Biodiesel)
Ultra Low Sulfur
(S ≤ 15 mg/kg)
Air Conditioning Refrigerant R-134-a Tetrafluoroethane
Compartment or
System
Type and Classification Viscosities
Ambient Temperature Range
°F °C
Min Max Min Max
16. General Information and Specifications
31200927 TH255C2-8
b. SN JK300150 to Present
Compartment or
System
Type and Classification Viscosities
Ambient Temperature Range
°F °C
Min Max Min Max
Engine Crankcase
CAT DEO
API CI-4 Plus
SAE 0W-20 -40 50 -40 10
SAE 0W-30 -40 86 -40 30
SAE 0W-40 -40 104 -40 40
SAE 5W-30 -22 86 -30 30
SAE 5W-40 -22 122 -30 50
SAE 10W-30 0 104 -18 40
SAE 10W-40 0 122 -18 50
SAE 15W-40 15 122 -9.5 50
Axle Differential
and
Wheel End
CAT Synthetic Gear Oil (GO)* SAE 75W-140 -22 113 -30 45
CAT Gear Oil (GO)* SAE 80W-90 -10 120 -23 49
CAT Gear Oil (GO)* SAE 85W-140 10 120 -12 59
CAT TDTO-TMS* Cat TDTO-TMS -4 122 -20 50
API GL4 with LS Additives
or
API GL5 with LS Additives
SAE90
SAE90LS
32 115 0 46
80W-90 -4 115 -20 46
75W-90 -40 115 -40 46
75W -40 50 -40 10
Hydraulic
and
Brake
Systems
CAT TDTO
CAT TDTO-TMS
CAT Arctic TDTO SYN
commercial TO-4
SAE 0W-20 -40 104 -40 40
SAE 0W-30 -40 104 -40 40
SAE 5W-30 -22 104 -30 40
SAE 5W-40 -22 104 -30 40
SAE 10W -4 104 -20 40
SAE 30 50 122 10 50
SAE 10W-30 -4 104 -20 40
SAE 15W-40 5 122 -15 50
Cat TDTO-TMS -4 122 -20 50
Boom Wear Pad
Grease
CAT Advanced 3Moly NLGI Grade 2 -4 104 -20 40
Grease Fittings Extreme Pressure Grease
NLGI Grade 2 EP
or
NLGI Grade 3 EP
with Moly Additive
5 122 -15 50
Engine Coolant CAT Extended Life Coolant (ELC) 50/50 Mix
17. General Information and Specifications
TH255C 31200927 2-9
Note: Friction Modifier (197-0017) required for axle differentials, refer to Section 2.3.2, “Capacities”.
Fuel
EN 590
ASTM D 975 Grade 1-D
ASTM D 975 Grade 2-D
(Maximum B5 Biodiesel)
Low Sulfur
(S ≤ 500 mg/)kg
Air Conditioning Refrigerant R-134-a Tetrafluoroethane
Compartment or
System
Type and Classification Viscosities
Ambient Temperature Range
°F °C
Min Max Min Max
18. General Information and Specifications
31200927 TH255C2-10
2.3.2 Capacities
Engine Crankcase Oil
Capacity w/Filter Change 7.5 qt (7,1 L)
Fuel Tank
Capacity
Prior to SN JK2010000, Prior to SN JK301000 24 gal (91 L)
SN JK201000 to Present, SN JK301000 to Present 20 gal (76 L)
Cooling System
System Capacity 14 qt (13,2 L)
Hydraulic System
System Capacity
Prior to SN JK2010000, Prior to SN JK301000 24 gal (91 L)
SN JK201000 to Present, SN JK301000 to Present 27 gal (103 L)
Reservoir Capacity to Full Mark
Prior to SN JK2010000, Prior to SN JK301000 16 gal (61 L)
SN JK201000 to Present, SN JK301000 to Present 19 gal (73 L)
Auxiliary Hydraulic Circuit Max Flow 18.7 gpm (71 lpm)
Brake System
System Capacity 0.7 qt (0,7 L)
Axles
Differential Housing Capacity 3.5 qt (3,3 L)
Friction Modifier (197-0017) - Required for front axle differential
(Must be premixed with axle fluid)
Not to exceed 5.4 oz (160 ml)
Wheel End Capacity 24 oz (0,7 L)
Front Axle Drop Box 21 oz (0,6 L)
Air Conditioning System (if equipped)
System Capacity 2.5 lb (1134 g)
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.