The CWM7.5 is a 2-way in-wall speaker system containing a 130mm Kevlar bass/mid-range driver and a 25mm soft dome tweeter. It utilizes technologies like Flowport and features high quality components such as Mundorf capacitors. The speaker has a glass reinforced ABS baffle that provides clean sound reproduction.

1. Custom Installation
CWM7.5
See nothing, hear everything
The CWM7.5 contains a 130mm(5in) bass/mid-range Kevlar® driver set in a
die-cast chassis and a Nautilus™ tube loaded 25mm (1in) soft dome tweeter.
Utilising proven technologies such as Flowport™ the speaker also features
the best quality components such as having Mundorf components on the
crossover. It has a critically formed baffle constructed from glass reinforced
ABS and the extra-rigidity provides a much cleaner sound reproduction.
Technical Specifications
Description 2-way in-wall system
Drive units 1x ø25mm (1in) Nautilus™ tube loaded soft dome tweeter
1x ø130mm (5in) blue Kevlar® cone bass/midrange
Frequency Range (-6dB) 49Hz – 28kHz
Recommended Amp Power 25 – 150w
Sensitivity SPL (2.83V, 1m) 86dB
Impedance Nominal (min) 6Ω (5.2Ω)
Frame height 356mm (14in)
Frame width 212mm (8.5in)
Cut-out height 331mm (13in)
Cut-out width 187mm (7.4in)
Cut-out height w/PMK 336mm (13.2in)
Cut-out width w/PMK 192mm (7.6in)
Depth 102mm (4.02in)
Reservoir box height 181mm (7.1in)
Reservoir box width 385mm (15.2in)
Reservoir box depth 60mm (2.4in)
Protrusion 8mm (0.32in)
PMK 7.5W
www.bowers-wilkins.com
Nautilus, Flowport and FST are
trademarks of B&W Group Ltd.
Kevlar is a registered trademark of
DuPont. Copyright © B&W Group
Ltd. E&OE