This document provides maintenance and repair information for LP3010/3020 series trucks. It includes sections on lubrication and adjustment, hydraulics, drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and electrical diagrams. The document contains overview diagrams of truck components, inspection and maintenance schedules, repair procedures, and wiring diagrams. Revisions provide corrections and additions to the text as well as changes to diagrams, tables, and descriptions.
This parts manual provides information to order replacement parts for a 220A (3.5T) forklift. It includes 6 sections covering general information, the engine, powertrain, hydraulics, electrical systems, and the frame and body. The manual was produced by Bell Equipment Company to assist with maintenance by providing illustrated part breakdowns and lists. It is important to note that parts and specifications may have changed since the manual was printed.
This manual provides guidelines for maintenance and operation of air compressor plants. It is divided into five chapters that cover definitions and responsibilities, positive displacement compressors, dynamic compressors, auxiliary equipment, and controls. The document contains detailed sections on startup, operation, preventative maintenance, and repairs for various compressor types and auxiliary equipment. The overall purpose is to establish standards for operators, mechanics, and supervisors to carry out operations and maintenance of air compressor plants.
This document provides instructions on how to use the troubleshooting and inspection sections of an automotive service manual. It begins with an overview of the typical diagnostic process, including gathering information, verifying symptoms, checking for diagnostic codes, and using inspection charts. It then explains different aspects of the troubleshooting sections, such as the diagnosis function, inspection procedures, and service data reference tables. The document emphasizes starting with connector and component inspections before checking harnesses and replacing control modules. It also provides guidance on measuring voltages, locating connectors in wiring diagrams, and inspecting for open and short circuits.
2001 mitsubishi pajero pinin service repair manualfjjfyjsekdmme
The document describes the workshop manual for servicing a vehicle. It includes sections on general information, troubleshooting, vehicle identification, specifications, safety precautions, and descriptions of the engine, drivetrain, suspension, brakes, steering, body, electrical systems, and supplemental restraint system. The manual provides procedures for inspection, maintenance, repair and installation of components.
2001 Mitsubishi Pajero Pinin Service Repair Manualhjjskemmdmm
This is the Highly Detailed factory service repair manual for the2001 MITSUBISHI PAJERO PININ, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2001 MITSUBISHI PAJERO PININ Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Engine Lubrication
Fuel
Engine Cooling
Intake and Exhaust
Engine Electrical
Engine and Emission Control
Clutch
Manual Transmission
Automatic Transmission
Front Axle
Rear Axle
Wheel and Tire
Power Plant Mount
Front Suspension
Rear Suspension
Service Brakes
Parking Brakes
Steering
Body
Exterior
Interior and Supplemental Restraint System
Chassis Electrical
Heater, Air Conditioning and Ventilation
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2001 MITSUBISHI PAJERO PININ Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Toro groundsmaster 220 d mower service repair manualfudfjjjskefkme
This service manual provides service technicians with maintenance, repair, and overhaul procedures for the TORO Groundsmaster 220-D/223-D mowers. It contains chapters covering the diesel engine, hydraulic and electrical systems, brakes, steering, cutting units, and seasonal storage. Safety instructions are provided to warn technicians of hazards involved in operating and servicing the mower. The manual should be used along with the operator's manual and engine manual for the specific model.
1994 Mitsubishi Galant Service Repair Manualfujdjfjskekmmd
This is the Highly Detailed factory service repair manual for the1994 MITSUBISHI GALANT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1994 MITSUBISHI GALANT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Engine Lubrication
Fuel
Engine Cooling
Intake and Exhaust
Engine Electrical
Engine and Emission Control
Clutch
Manual Transmission
Automatic Transmission
Front Axle
Rear Axle
Wheel and Tire
Power Plant Mount
Front Suspension
Rear Suspension
Service Brakes
Parking Brakes
Steering
Body
Exterior
Interior and Supplemental Restraint System
Chassis Electrical
Heater, Air Conditioning and Ventilation
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1994 MITSUBISHI GALANT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
1995 Mitsubishi Galant Service Repair Manualjfjjsefkkemmde
This is the Highly Detailed factory service repair manual for the1995 MITSUBISHI GALANT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1995 MITSUBISHI GALANT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Engine Lubrication
Fuel
Engine Cooling
Intake and Exhaust
Engine Electrical
Engine and Emission Control
Clutch
Manual Transmission
Automatic Transmission
Front Axle
Rear Axle
Wheel and Tire
Power Plant Mount
Front Suspension
Rear Suspension
Service Brakes
Parking Brakes
Steering
Body
Exterior
Interior and Supplemental Restraint System
Chassis Electrical
Heater, Air Conditioning and Ventilation
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1995 MITSUBISHI GALANT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
This parts manual provides information to order replacement parts for a 220A (3.5T) forklift. It includes 6 sections covering general information, the engine, powertrain, hydraulics, electrical systems, and the frame and body. The manual was produced by Bell Equipment Company to assist with maintenance by providing illustrated part breakdowns and lists. It is important to note that parts and specifications may have changed since the manual was printed.
This manual provides guidelines for maintenance and operation of air compressor plants. It is divided into five chapters that cover definitions and responsibilities, positive displacement compressors, dynamic compressors, auxiliary equipment, and controls. The document contains detailed sections on startup, operation, preventative maintenance, and repairs for various compressor types and auxiliary equipment. The overall purpose is to establish standards for operators, mechanics, and supervisors to carry out operations and maintenance of air compressor plants.
This document provides instructions on how to use the troubleshooting and inspection sections of an automotive service manual. It begins with an overview of the typical diagnostic process, including gathering information, verifying symptoms, checking for diagnostic codes, and using inspection charts. It then explains different aspects of the troubleshooting sections, such as the diagnosis function, inspection procedures, and service data reference tables. The document emphasizes starting with connector and component inspections before checking harnesses and replacing control modules. It also provides guidance on measuring voltages, locating connectors in wiring diagrams, and inspecting for open and short circuits.
2001 mitsubishi pajero pinin service repair manualfjjfyjsekdmme
The document describes the workshop manual for servicing a vehicle. It includes sections on general information, troubleshooting, vehicle identification, specifications, safety precautions, and descriptions of the engine, drivetrain, suspension, brakes, steering, body, electrical systems, and supplemental restraint system. The manual provides procedures for inspection, maintenance, repair and installation of components.
2001 Mitsubishi Pajero Pinin Service Repair Manualhjjskemmdmm
This is the Highly Detailed factory service repair manual for the2001 MITSUBISHI PAJERO PININ, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2001 MITSUBISHI PAJERO PININ Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Engine Lubrication
Fuel
Engine Cooling
Intake and Exhaust
Engine Electrical
Engine and Emission Control
Clutch
Manual Transmission
Automatic Transmission
Front Axle
Rear Axle
Wheel and Tire
Power Plant Mount
Front Suspension
Rear Suspension
Service Brakes
Parking Brakes
Steering
Body
Exterior
Interior and Supplemental Restraint System
Chassis Electrical
Heater, Air Conditioning and Ventilation
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2001 MITSUBISHI PAJERO PININ Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Toro groundsmaster 220 d mower service repair manualfudfjjjskefkme
This service manual provides service technicians with maintenance, repair, and overhaul procedures for the TORO Groundsmaster 220-D/223-D mowers. It contains chapters covering the diesel engine, hydraulic and electrical systems, brakes, steering, cutting units, and seasonal storage. Safety instructions are provided to warn technicians of hazards involved in operating and servicing the mower. The manual should be used along with the operator's manual and engine manual for the specific model.
1994 Mitsubishi Galant Service Repair Manualfujdjfjskekmmd
This is the Highly Detailed factory service repair manual for the1994 MITSUBISHI GALANT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1994 MITSUBISHI GALANT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Engine Lubrication
Fuel
Engine Cooling
Intake and Exhaust
Engine Electrical
Engine and Emission Control
Clutch
Manual Transmission
Automatic Transmission
Front Axle
Rear Axle
Wheel and Tire
Power Plant Mount
Front Suspension
Rear Suspension
Service Brakes
Parking Brakes
Steering
Body
Exterior
Interior and Supplemental Restraint System
Chassis Electrical
Heater, Air Conditioning and Ventilation
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1994 MITSUBISHI GALANT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
1995 Mitsubishi Galant Service Repair Manualjfjjsefkkemmde
This is the Highly Detailed factory service repair manual for the1995 MITSUBISHI GALANT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.1995 MITSUBISHI GALANT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Engine Lubrication
Fuel
Engine Cooling
Intake and Exhaust
Engine Electrical
Engine and Emission Control
Clutch
Manual Transmission
Automatic Transmission
Front Axle
Rear Axle
Wheel and Tire
Power Plant Mount
Front Suspension
Rear Suspension
Service Brakes
Parking Brakes
Steering
Body
Exterior
Interior and Supplemental Restraint System
Chassis Electrical
Heater, Air Conditioning and Ventilation
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1995 MITSUBISHI GALANT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Crown LP3020 Lift Truck Service Repair Manual.pdfpingdun24363384
The document is a maintenance manual for LP3010/3020 Series trucks. It provides an overview of revisions made to the manual, a table of contents listing maintenance and repair procedures for various systems, and safety information to follow when working on the trucks. Lubrication points, hydraulic and electrical components, the drive unit, and inspection schedules are described over several sections.
Crown LP3010 Lift Truck Service Repair Manual.pdfpingdun24363384
The document is a maintenance manual for LP3010/3020 Series trucks. It provides an overview of revisions made to the manual, a table of contents listing maintenance and repair procedures for various systems, and safety information to follow when working on the trucks. Procedures are organized by section and include lubrication and adjustments, hydraulics, drive unit, and electrical components.
Crown LP3010 Lift Truck Service Repair Manual.pdfxuxun185936
The document provides maintenance instructions for LP3010/3020 series trucks. It includes sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and other systems. Revision notes indicate changes made to torque specifications, diagrams, component names, and other details. Proper maintenance is important to ensure safe and reliable operation of the trucks.
Crown LP3020 Lift Truck Service Repair Manual.pdfxuxun185936
The document provides maintenance instructions for LP3010/3020 series trucks. It includes overview diagrams of the truck components, schedules for inspection and maintenance, instructions for repairing and replacing parts like the hydraulic pump, drive unit, electrical components, brake, steering system, lifting mechanism, cylinders, and more. Revision notes list corrections and additions made between document versions.
Crown LP3010 Lift Truck Service Repair Manual.pdfkfv43907349
The document provides maintenance instructions for LP3010/3020 series trucks. It includes sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and other systems. Revision notes indicate changes made to torque specifications, diagrams, component names, and other details. The manual aims to guide maintenance personnel in properly servicing the trucks.
Crown LP3020 Lift Truck Service Repair Manual.pdfkfv43907349
The document provides maintenance instructions for LP3010/3020 series trucks. It includes sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and other systems. Revision notes indicate changes made to torque specifications, diagrams, component names, and other details. Proper maintenance is important to ensure safe and reliable operation of the trucks.
2002 Mitsubishi Space Star Service Repair Manual.pdff7usedjkddm
This document is a workshop manual for chassis components. It provides service and repair procedures for technicians. The manual covers various vehicle systems including the engine, fuel system, brakes, suspension, steering, and electrical components. It includes safety warnings and provides an overview of how to use the manual, vehicle identification numbers, specifications, lifting and jacking points, and a standard torque table. Technicians should thoroughly review the manual before working on any vehicle components.
2003 Mitsubishi Space Star Service Repair Manual.pdff7usedjkddm
This document is a workshop manual for chassis components. It provides repair and maintenance procedures for technicians. The manual covers various vehicle systems including the engine, fuel system, brakes, suspension, electrical components, and more. Safety warnings are provided for working on supplemental restraint systems and airbags. The manual also outlines how to identify vehicle models and locate lifting and jacking points when working underneath the vehicle.
2001 Mitsubishi Space Star Service Repair Manual.pdff7usedjkddm
This document is a workshop manual for chassis components. It provides repair and maintenance procedures for technicians. The manual covers various vehicle systems including the engine, fuel system, brakes, suspension, electrical components, and more. Safety warnings are provided for working on supplemental restraint systems and airbags. The manual also outlines how to identify vehicle models and locate lifting and jacking points when working underneath the vehicle.
2000 Mitsubishi Space Star Service Repair Manual.pdff7usedjkddm
This document is a workshop manual for chassis components. It provides repair and maintenance procedures for technicians. The manual covers topics like the engine, fuel system, brakes, suspension, electrical components, and more. Technicians are warned to only perform supplemental restraint system and airbag work at authorized dealers due to safety risks. The manual instructs technicians on how to identify vehicle models and locate lifting and jacking points. It provides general information on specifications, precautions, and torque specifications to aid technicians in repair work.
1999 Mitsubishi Space Star Service Repair Manual.pdff7usedjkddm
This document is a workshop manual for chassis components. It provides repair and maintenance procedures for technicians. The manual covers various vehicle systems including the engine, fuel system, brakes, suspension, electrical components, and more. Safety warnings are provided for working on supplemental restraint systems and airbags. The manual also outlines how to identify vehicle models and locate lifting and jacking points when servicing vehicles.
Komatsu wa250 6 wheel loader service repair manual sn75001 and upfjskekdmmem
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA250-6 and WA250PZ-6.
- Specifications for the engines, cooling systems, power trains, steering systems, brake systems, undercarriages, hydraulic systems, work equipment, and electrical systems are provided.
- Standard values, testing and adjusting procedures, and troubleshooting information for various components are included.
- Failure codes, fuse locations, and troubleshooting tips and procedures are listed to assist with repairs.
Komatsu d31 pl 20 dozer bulldozer service repair manualfjskekdmmem
1. The document provides instructions for servicing Komatsu bulldozers, including disassembly, assembly, maintenance, and safety procedures.
2. Safety precautions are emphasized, including wearing protective equipment, blocking equipment, and ensuring all pressure is released before disassembling components.
3. The document outlines the removal and installation steps for starting motors, alternators, and engine oil cooler cores on various Komatsu bulldozer models. Precise tightening torques are specified.
Komatsu d31 p 20a dozer bulldozer service repair manualfjskekdmmem
1. The document provides instructions for servicing Komatsu bulldozers, including disassembly, assembly, maintenance, and safety procedures.
2. Safety precautions are emphasized, including wearing protective equipment, blocking equipment, and ensuring all pressure is released before disassembling components.
3. The document outlines the removal and installation steps for starting motors, alternators, and engine oil cooler cores on various Komatsu bulldozer models. Precise tightening torques are specified.
Komatsu d31 p 20 dozer bulldozer service repair manualfjskekdmmem
1. The document provides instructions for servicing Komatsu bulldozers, including disassembly, assembly, maintenance, and safety procedures.
2. Safety precautions are emphasized, including wearing protective equipment, blocking equipment, and ensuring all pressure is released before disassembling components.
3. The document outlines the removal and installation steps for starting motors, alternators, and engine oil cooler cores on various Komatsu bulldozer models. Precise tightening torques are specified.
Komatsu d31 e 20 dozer bulldozer service repair manualfjskekdmmem
1. The document provides instructions for servicing Komatsu bulldozers, including disassembly, assembly, maintenance, and safety procedures.
2. Safety precautions are emphasized, including wearing protective equipment, blocking equipment, and ensuring all pressure is released before disassembling components.
3. The document outlines the removal and installation steps for starting motors, alternators, and engine oil cooler cores on various Komatsu bulldozer models. Precise tightening torques are specified.
Komatsu d21 a,p 8 dozer bulldozer service repair manual (sn 83001 and up)fjskekdmmem
This shop manual provides instructions for servicing a Komatsu D21A-8 bulldozer. It contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. The manual describes removing and installing components such as the fuel injection pump, radiator guard, and engine. Safety precautions are outlined and technicians are instructed to mark parts for alignment during reinstallation. Proper oil and coolant refilling is emphasized after component replacement.
Komatsu 12 v170 1 diesel engine service repair manualfjskekdmmem
This document provides specifications for a Komatsu diesel engine model SA12V170-1, including:
- It has 12 cylinders, a bore of 170mm and a stroke of 170mm, for a total displacement of 46.3 liters.
- Key specifications include a flywheel horsepower of 784kW at 1,800rpm, a maximum torque of 5,000Nm at 1,300rpm, and a dry weight of 6,210kg.
- Additional information is provided on the fuel system, lubrication system, cooling system, alternator, starter, and other engine components. Specifications are also listed for variations of this engine used in different machine models.
John deere 500 trail buck utility atv service repair manual (tm2160)fjskekdmmem
This document provides repair instructions for the front drive shaft, drive shaft boot, and front differential of an ATV. It describes how to remove and install these components and includes inspection steps. Key details include checking boots for damage, verifying smooth rotation of differential gears, adjusting differential backlash through shim positioning on the ring gear carrier, and recentering parts if the ring gear carrier, pinion gear, or housing are changed. Torque specifications and precautions are provided throughout.
John deere 500 buck utility atv service repair manual (tm2153)fjskekdmmem
The document provides technical information for servicing the front drive components of a Buck Utility ATV. It describes removal and installation procedures for the front drive shaft, drive shaft boot, and front differential. It also provides instructions for inspecting these components and adjusting the backlash of the front differential. Key steps include supporting the vehicle securely, using the correct tools and fastener torques, and replacing any damaged parts like O-rings, boots, or cotter pins.
John deere 315 d side shift loader service repair technical manual (tm1497)fjskekdmmem
This document provides instructions for assembling the input shaft and forward clutch of a backhoe loader reverser. The steps include installing bearings, packings, snap rings, pressure plates, disks, springs, and sealing rings. Clearances and thicknesses are specified. Proper alignment of keys and splines is important. Lubrication with petroleum jelly is noted to prevent damage to sealing rings during assembly.
John deere 314 f walk behind tillers service repair manual (tm1687)fjskekdmmem
This technical manual provides specifications and safety information for John Deere walk-behind tillers models 314F, 518R, and 820R. It contains sections on specifications, safety procedures, maintenance, troubleshooting, and repair. The manual aims to equip technicians with essential information and ensure safe and proper operation of the equipment. Safety is emphasized, including proper handling of fluids, protective equipment, and avoiding rotating tines during operation.
More Related Content
Similar to Crown lp3020 lift truck service repair manual
Crown LP3020 Lift Truck Service Repair Manual.pdfpingdun24363384
The document is a maintenance manual for LP3010/3020 Series trucks. It provides an overview of revisions made to the manual, a table of contents listing maintenance and repair procedures for various systems, and safety information to follow when working on the trucks. Lubrication points, hydraulic and electrical components, the drive unit, and inspection schedules are described over several sections.
Crown LP3010 Lift Truck Service Repair Manual.pdfpingdun24363384
The document is a maintenance manual for LP3010/3020 Series trucks. It provides an overview of revisions made to the manual, a table of contents listing maintenance and repair procedures for various systems, and safety information to follow when working on the trucks. Procedures are organized by section and include lubrication and adjustments, hydraulics, drive unit, and electrical components.
Crown LP3010 Lift Truck Service Repair Manual.pdfxuxun185936
The document provides maintenance instructions for LP3010/3020 series trucks. It includes sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and other systems. Revision notes indicate changes made to torque specifications, diagrams, component names, and other details. Proper maintenance is important to ensure safe and reliable operation of the trucks.
Crown LP3020 Lift Truck Service Repair Manual.pdfxuxun185936
The document provides maintenance instructions for LP3010/3020 series trucks. It includes overview diagrams of the truck components, schedules for inspection and maintenance, instructions for repairing and replacing parts like the hydraulic pump, drive unit, electrical components, brake, steering system, lifting mechanism, cylinders, and more. Revision notes list corrections and additions made between document versions.
Crown LP3010 Lift Truck Service Repair Manual.pdfkfv43907349
The document provides maintenance instructions for LP3010/3020 series trucks. It includes sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and other systems. Revision notes indicate changes made to torque specifications, diagrams, component names, and other details. The manual aims to guide maintenance personnel in properly servicing the trucks.
Crown LP3020 Lift Truck Service Repair Manual.pdfkfv43907349
The document provides maintenance instructions for LP3010/3020 series trucks. It includes sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and other systems. Revision notes indicate changes made to torque specifications, diagrams, component names, and other details. Proper maintenance is important to ensure safe and reliable operation of the trucks.
2002 Mitsubishi Space Star Service Repair Manual.pdff7usedjkddm
This document is a workshop manual for chassis components. It provides service and repair procedures for technicians. The manual covers various vehicle systems including the engine, fuel system, brakes, suspension, steering, and electrical components. It includes safety warnings and provides an overview of how to use the manual, vehicle identification numbers, specifications, lifting and jacking points, and a standard torque table. Technicians should thoroughly review the manual before working on any vehicle components.
2003 Mitsubishi Space Star Service Repair Manual.pdff7usedjkddm
This document is a workshop manual for chassis components. It provides repair and maintenance procedures for technicians. The manual covers various vehicle systems including the engine, fuel system, brakes, suspension, electrical components, and more. Safety warnings are provided for working on supplemental restraint systems and airbags. The manual also outlines how to identify vehicle models and locate lifting and jacking points when working underneath the vehicle.
2001 Mitsubishi Space Star Service Repair Manual.pdff7usedjkddm
This document is a workshop manual for chassis components. It provides repair and maintenance procedures for technicians. The manual covers various vehicle systems including the engine, fuel system, brakes, suspension, electrical components, and more. Safety warnings are provided for working on supplemental restraint systems and airbags. The manual also outlines how to identify vehicle models and locate lifting and jacking points when working underneath the vehicle.
2000 Mitsubishi Space Star Service Repair Manual.pdff7usedjkddm
This document is a workshop manual for chassis components. It provides repair and maintenance procedures for technicians. The manual covers topics like the engine, fuel system, brakes, suspension, electrical components, and more. Technicians are warned to only perform supplemental restraint system and airbag work at authorized dealers due to safety risks. The manual instructs technicians on how to identify vehicle models and locate lifting and jacking points. It provides general information on specifications, precautions, and torque specifications to aid technicians in repair work.
1999 Mitsubishi Space Star Service Repair Manual.pdff7usedjkddm
This document is a workshop manual for chassis components. It provides repair and maintenance procedures for technicians. The manual covers various vehicle systems including the engine, fuel system, brakes, suspension, electrical components, and more. Safety warnings are provided for working on supplemental restraint systems and airbags. The manual also outlines how to identify vehicle models and locate lifting and jacking points when servicing vehicles.
Similar to Crown lp3020 lift truck service repair manual (11)
Komatsu wa250 6 wheel loader service repair manual sn75001 and upfjskekdmmem
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA250-6 and WA250PZ-6.
- Specifications for the engines, cooling systems, power trains, steering systems, brake systems, undercarriages, hydraulic systems, work equipment, and electrical systems are provided.
- Standard values, testing and adjusting procedures, and troubleshooting information for various components are included.
- Failure codes, fuse locations, and troubleshooting tips and procedures are listed to assist with repairs.
Komatsu d31 pl 20 dozer bulldozer service repair manualfjskekdmmem
1. The document provides instructions for servicing Komatsu bulldozers, including disassembly, assembly, maintenance, and safety procedures.
2. Safety precautions are emphasized, including wearing protective equipment, blocking equipment, and ensuring all pressure is released before disassembling components.
3. The document outlines the removal and installation steps for starting motors, alternators, and engine oil cooler cores on various Komatsu bulldozer models. Precise tightening torques are specified.
Komatsu d31 p 20a dozer bulldozer service repair manualfjskekdmmem
1. The document provides instructions for servicing Komatsu bulldozers, including disassembly, assembly, maintenance, and safety procedures.
2. Safety precautions are emphasized, including wearing protective equipment, blocking equipment, and ensuring all pressure is released before disassembling components.
3. The document outlines the removal and installation steps for starting motors, alternators, and engine oil cooler cores on various Komatsu bulldozer models. Precise tightening torques are specified.
Komatsu d31 p 20 dozer bulldozer service repair manualfjskekdmmem
1. The document provides instructions for servicing Komatsu bulldozers, including disassembly, assembly, maintenance, and safety procedures.
2. Safety precautions are emphasized, including wearing protective equipment, blocking equipment, and ensuring all pressure is released before disassembling components.
3. The document outlines the removal and installation steps for starting motors, alternators, and engine oil cooler cores on various Komatsu bulldozer models. Precise tightening torques are specified.
Komatsu d31 e 20 dozer bulldozer service repair manualfjskekdmmem
1. The document provides instructions for servicing Komatsu bulldozers, including disassembly, assembly, maintenance, and safety procedures.
2. Safety precautions are emphasized, including wearing protective equipment, blocking equipment, and ensuring all pressure is released before disassembling components.
3. The document outlines the removal and installation steps for starting motors, alternators, and engine oil cooler cores on various Komatsu bulldozer models. Precise tightening torques are specified.
Komatsu d21 a,p 8 dozer bulldozer service repair manual (sn 83001 and up)fjskekdmmem
This shop manual provides instructions for servicing a Komatsu D21A-8 bulldozer. It contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. The manual describes removing and installing components such as the fuel injection pump, radiator guard, and engine. Safety precautions are outlined and technicians are instructed to mark parts for alignment during reinstallation. Proper oil and coolant refilling is emphasized after component replacement.
Komatsu 12 v170 1 diesel engine service repair manualfjskekdmmem
This document provides specifications for a Komatsu diesel engine model SA12V170-1, including:
- It has 12 cylinders, a bore of 170mm and a stroke of 170mm, for a total displacement of 46.3 liters.
- Key specifications include a flywheel horsepower of 784kW at 1,800rpm, a maximum torque of 5,000Nm at 1,300rpm, and a dry weight of 6,210kg.
- Additional information is provided on the fuel system, lubrication system, cooling system, alternator, starter, and other engine components. Specifications are also listed for variations of this engine used in different machine models.
John deere 500 trail buck utility atv service repair manual (tm2160)fjskekdmmem
This document provides repair instructions for the front drive shaft, drive shaft boot, and front differential of an ATV. It describes how to remove and install these components and includes inspection steps. Key details include checking boots for damage, verifying smooth rotation of differential gears, adjusting differential backlash through shim positioning on the ring gear carrier, and recentering parts if the ring gear carrier, pinion gear, or housing are changed. Torque specifications and precautions are provided throughout.
John deere 500 buck utility atv service repair manual (tm2153)fjskekdmmem
The document provides technical information for servicing the front drive components of a Buck Utility ATV. It describes removal and installation procedures for the front drive shaft, drive shaft boot, and front differential. It also provides instructions for inspecting these components and adjusting the backlash of the front differential. Key steps include supporting the vehicle securely, using the correct tools and fastener torques, and replacing any damaged parts like O-rings, boots, or cotter pins.
John deere 315 d side shift loader service repair technical manual (tm1497)fjskekdmmem
This document provides instructions for assembling the input shaft and forward clutch of a backhoe loader reverser. The steps include installing bearings, packings, snap rings, pressure plates, disks, springs, and sealing rings. Clearances and thicknesses are specified. Proper alignment of keys and splines is important. Lubrication with petroleum jelly is noted to prevent damage to sealing rings during assembly.
John deere 314 f walk behind tillers service repair manual (tm1687)fjskekdmmem
This technical manual provides specifications and safety information for John Deere walk-behind tillers models 314F, 518R, and 820R. It contains sections on specifications, safety procedures, maintenance, troubleshooting, and repair. The manual aims to equip technicians with essential information and ensure safe and proper operation of the equipment. Safety is emphasized, including proper handling of fluids, protective equipment, and avoiding rotating tines during operation.
John deere 310 d backhoe loaders service repair technical manual (tm1497)fjskekdmmem
This document provides instructions for assembling the input shaft and forward clutch of a backhoe loader reverser. The steps include installing bearings, packings, snap rings, pressure plates, disks, springs, and sealing rings. Clearances and thicknesses are specified. Proper alignment of keys and splines is important. Lubrication with petroleum jelly is noted to prevent damage to sealing rings during assembly.
John deere 35 g (sn. from k270001) compact excavator service repair technical...fjskekdmmem
The document provides instructions for removing and installing a sprocket, front idler, track adjuster, and recoil spring on an excavator. It describes removing fasteners and components, inspecting and replacing parts as needed, applying threadlocker and lubricant, and reinstalling components while following safety precautions for heavy lifting. Special tools are required to compress the recoil spring for disassembly and assembly.
John deere 4x2 and 4x6 gator utility vehicle service repair manual (tm1518)fjskekdmmem
This document provides specifications and information related to the power train and gear system for John Deere Gator utility vehicles. It includes specifications such as drive belt width, clutch engagement speeds, secondary clutch spring torque specifications, chain tension for 6x4 models, chain size and length for 6x4 models, and torque specifications for secondary clutch mounting cap screws. The document is intended as a technical reference for experienced technicians working on these vehicle systems.
New holland t4.75 n tractor service repair manualfjskekdmmem
This document is a service manual for tractor models T4.75N/T4.85N/T4.95N/T4.105N and T4.65V/T4.75V/T4.85V/T4.95V/T4.105V. It contains information on engine service, clutches, transmissions, differentials, front and rear axle systems, power take-off systems, brakes, hydraulic systems, hitches and couplings, steering, wheels, cab climate control, electrical systems, and the platform, cab, bodywork and decals. The manual provides maintenance and repair instructions for technicians, listed by system and component.
New holland t3.75 f tractor service repair manualfjskekdmmem
This document is a service manual that provides information for servicing and repairing T3.50F, T3.55F, T3.65F, and T3.75F tractors. It contains sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, hydrostatic drive, power take-off, brakes and controls, hydraulic systems, steering, wheels, electrical systems, and the operator platform. Safety guidelines are provided at the beginning, advising technicians to follow procedures carefully, use protective equipment, and take precautions such as disabling the engine before working.
New holland l220 tier 4 b (final) skid steer loader service repair manual pin...fjskekdmmem
This document is a service manual for CNH Industrial's L218 and L220 Tier 4B (final) 200 Series Skid Steer Loaders. It contains introductory information and sections covering the engine, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, cab climate control, electrical systems, front loader and bucket, and the platform, cab, bodywork and decals. Safety rules are provided regarding personal safety when servicing the equipment. The document contains detailed component-level information for servicing and repair.
New holland l216 tier 4 b (final) skid steer loader service repair manual pin...fjskekdmmem
This document is a service manual for CNH Industrial L213 Tier 3 and L216 Tier 4B 200 Series Skid Steer Loaders that:
- Contains sections on the engine, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, cab climate control, electrical systems, front loader and bucket, and platform, cab, bodywork, and decals.
- Warns that all repair and maintenance work listed must only be done by qualified dealership personnel strictly following the instructions and using special tools, and anyone performing unauthorized work will be responsible for damages.
- Provides general specifications, capacities, product identification information, torque
New holland l216 tier 4 b (final) skid steer loader service repair manual pin...fjskekdmmem
This document is a service manual for the L213 and L216 200 Series Skid Steer Loaders with Tier 4B engines. It provides information on engine systems, front and rear axle systems, hydrostatic drive systems, brakes and controls, hydraulic systems, frames and ballasting, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork and decals. The manual contains part numbers, replacement part numbers, and sections for various components with instructions. Safety rules are provided regarding personal safety and machine safety.
New holland e55 b mini excavator service repair manualfjskekdmmem
This service manual provides maintenance and repair instructions for the E45B SR, E50B SR, and E55B mini excavators. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blades, and the platform, cab, bodywork and decals. Safety information is provided to ensure personal safety during maintenance and repair.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
2. M1.0-0000-000AA
REVISION
MS-LP31010/3020-GB 09/02 • Rev. A • Printed in Germany MS-REV-3010
Overview of Revisions:
Page 3 Rev.1 04/00 General corrections and additions to the text.
Reference to authorised service personnel added.
Page 85 Rev.1 09/02 In table E-09 battery supply changed from 48 V to 24 V.
Page 78 Rev.1 09/02 In table E-02: emergency disconnect switch test description changed.
Page 96 Rev.1 09/02 Programmer / menu structure for the steering controller corrected,
missing tables (alarms etc.) inserted on the following pages.
Page 102 Rev.1 09/02 Remote control for platform: diagram and photo added to clarify application and
connection.Text corrected.
Page 114 Rev.1 09/02 Diagram and description of brake corrected, as only a single stage brake is used.
Page 115 Rev.1 09/02 Diagram of brake corrected, as only a single stage brake is used.
Page 169 Rev.1 09/02 Crown abbreviations added to the wiring diagram in brackets.
Page 173 ff. Rev. 2 09/02 Explanations in table Hyd_Dia-1-GB corrected.
Hydraulic diagram references to truck types and variants corrected.
4. III
TABLE OF CONTENT
MS-LP3010/3020-GB 09/02 • Rev. A • Printed in Germany
Table of Content
ITD – INTRODUCTION PAGE SER-NR. CUT REV.
Safety Symbols used in the Manual ................................... 3 ................................................................ Rev.1 04/00
General Maintenance and Repair Safety Notes................... 3
Maintenance and Repair.................................................... 3 ................................................................ Rev.1 04/00
Before Leaving the Truck ................................................... 4
Before Carrying out Work on the Truck .............................. 4
Before Operating the Truck ................................................ 4
Warnings and Labels on theTruck ...................................... 4
General ................................................................................. 7
Operating Instructions ....................................................... 7
ServiceTraining................................................................. 7
Ordering Spare Parts ........................................................ 7
Using the Manual .............................................................. 7
Model-Number ...................................................................... 8
M1 – LUBRICATION AND ADJUSTMENT PAGE SER-NR. CUT REV.
Jacking up the Truck ......................................................... 11
Lifting the Vehicle with a Crane ......................................... 12
Lifting the Vehicle with a Fork-Lift Truck ....................... 12
Towing the vehicle away .............................................. 12
Access to Components................................................ 13
LP3010 Overview .............................................................. 13
LP3020 Overview .............................................................. 14
LP 3010 Overview – High Version ................................ 15
Access to Components................................................ 17
Access to Drive Unit, Hydraulic
System and Electrical Components .................................. 18
Maintenance ......................................................................... 19
Operator Involvement........................................................ 19
Daily Maintenance Record ................................................ 19
Inspection and Maintenance
Schedule........................................................................... 19
Scheduled Replacement of High Pressure Hoses ............. 22
Monthly or Every 100 Operating Hours.............................. 23
Every 3 Months or 250 Operating Hours ........................... 25
Every 6 Months or 500 Operating Hours ........................... 27
Annually or Every 1,000 Operating Hours.......................... 29
Recommended Lubricants................................................. 31
Lubrication Points, Overview ............................................. 33
Torques ................................................................................. 34
M2 – HYDRAULICS PAGE SER-NR. CUT REV.
Changing Hydraulic Oil ....................................................... 37
Hydraulic Pipes and Accessories ....................................... 37
Removing the Hydraulic Unit ............................................. 38
Replacing the Hydraulic Pump .......................................... 39
Removal ...................................................................... 39
Installation ................................................................... 39
Commissioning ............................................................ 39
Pump Motor ...................................................................... 40
Replacing the Hydraulic Filter ........................................... 40
Oil Change ........................................................................ 41
Valve Block ........................................................................... 42
Pressure Relief Valves ...................................................... 42
Operation .......................................................................... 42
5. IV
TABLE OF CONTENT
MS-LP3010/3020-GB 09/02 • Rev. A • Printed in Germany
M2 – HYDRAULICS PAGE SER-NR. CUT REV.
Platform Lift Pressure Relief Valve Setting................... 42
Aux. Lift Pressure Relief Valve Setting ......................... 43
Non-ReturnValve .............................................................. 43
Functional Test:............................................................ 43
CompensationValve ......................................................... 43
Functional Test:............................................................ 43
Line Break Safety Device ................................................. 44
Tools Required: ............................................................ 44
Line Break Safety Device Functional Test .................... 44
Emergency LoweringValve ............................................... 45
Tools Required: ............................................................ 45
Emergency Lowering Valve Functional Test .................. 45
M3 – DRIVE UNIT PAGE SER-NR. CUT REV.
Drive Unit .............................................................................. 49
Preparation ....................................................................... 49
Drive Unit Removal ........................................................... 49
Gear Unit Repair ............................................................... 51
General ........................................................................ 51
Drive Unit Removal ...................................................... 51
Gear Unit Assembly.......................................................... 53
Installing the Drive Unit ..................................................... 54
M4 – ELECTRICS PAGE SER-NR. CUT REV.
Electrical Components ........................................................ 57
AV
Alarm ................................................................................ 57
CX
Horn .................................................................................. 57
F1, F2, FA,FA4
Fuses ............................................................................... 57
F3, FA3
Fuses ............................................................................... 57
OPTION
F01
Aisle Recognition Sensor .................................................. 57
OPTION
F02
Aisle Recognition Sensor .................................................. 57
FE
Brake ................................................................................ 57
HN3
Alarm ................................................................................ 57
K1, K2
Travel Direction Contactors ............................................... 57
K4
Main Contactor ................................................................. 57
K6
Steering Contactor ............................................................ 58
M1
Traction Motor ................................................................... 58
M2
Pump Motor ...................................................................... 58
M3
Steering Motor .................................................................. 58
MAC
Chain Slack Switch ........................................................... 58
MBC ................................................................................. 58
MF
Steering Limit Switch ........................................................ 58
7. VI
TABLE OF CONTENT
MS-LP3010/3020-GB 09/02 • Rev. A • Printed in Germany
M4 – ELECTRICS PAGE SER-NR. CUT REV.
MK3N Lift Controller ............................................................ 64
General ............................................................................. 64
Precautionary Measures .............................................. 64
Maintenance ..................................................................... 64
Replacing the Lift Controller .............................................. 64
Settings after Replacing the Lift Controller ................... 65
EPS-DC Steering Controller ................................................ 66
General ............................................................................. 66
Precautionary Measures .............................................. 66
Maintenance ..................................................................... 66
Replacing theTraction Controller ....................................... 66
Settings after Replacing the Steering Controller ........... 67
Replacing Fuses .......................................................... 67
Graphic Display.................................................................... 68
General ............................................................................. 68
Precautionary Measures .............................................. 68
Maintenance ..................................................................... 68
Replacing the Graphic Display .......................................... 69
Settings after Replacing the Graphic Display ............... 69
Programmer ......................................................................... 71
General ............................................................................. 71
Connecting the programmer and the adapter ..................... 72
Data Connection to the Pump Controller: ..................... 72
Data connection to the Traction Controller: ................... 72
Data Connection to the Graphical Display .................... 73
Operating Menu ................................................................ 74
General ........................................................................ 74
Menu Functions ........................................................... 74
Graphic Display, Menu Structure.................................. 75
Graphic Display; Parameter Change Menu ......................... 76
Maximum Speed Setting ................................................... 77
Graphic Display
TESTER Menu ................................................................. 78 ............................................................. Rev. 1 09/02
Graphic Display
SAVE PARAMETER Menu ............................................... 79
Graphic Display
ALARMS Menu ................................................................. 80
Graphic Display
Language Reference List for the ALARM Menu................ 84
Graphic Display
SET OPTIONS Menu........................................................ 85
Graphic Display
ADJUSTMENTS Menu ..................................................... 86
Traction Control System, Menu Structure ..................... 87
Traction Control System, PARAMETER CHANGE Menu .... 88
Traction Control System,
TESTER Menu ...................................................................... 89
Traction Control System,
ALARMS Menu ..................................................................... 90
Traction Control System,
SET MODEL Menu ............................................................... 91
Lift Control System, Menu Structure................................... 92
Lift Control System,
PARAMETER CHANGE Menu .............................................. 93
Lift Control System,
TESTER Menu ...................................................................... 94
Lift Control System,
ALARMS Menu ..................................................................... 95
8. VII
TABLE OF CONTENT
MS-LP3010/3020-GB 09/02 • Rev. A • Printed in Germany
M4 – ELECTRICS PAGE SER-NR. CUT REV.
Steering Control System, Menu Structure .......................... 96 ............................................................. Rev. 1 09/02
Steering Control System,
PARAMETER CHANGE Menu .............................................. 97
Steering Control System,
TESTER menu ...................................................................... 98
Steering Control System,
SET OPTIONS menu ............................................................ 99
Steering Control System,
ADJUSTMENTS menu.......................................................... 100
Steering Control System, ALARM ....................................... 101
Audible Alarm ................................................................... 101
Programmer, ALARMS menu ............................................ 101
Remote Control for Platform ............................................... 102
Traction Control System SafetyTest ................................... 103
Electric Motors ..................................................................... 105
General Maintenance Instructions ..................................... 105
Preparation .................................................................. 105
Important Maintenance Instructions ................................... 105
Drive Motor Maintenance ..................................................... 106
Access to Brushes ........................................................... 106
Maintenance ..................................................................... 106
Armature ...................................................................... 106
Bearings ...................................................................... 106
Pump Motor Maintenance ................................................. 107
Access to Brushes ...................................................... 107
Maintenance ................................................................ 107
Armature ...................................................................... 107
Bearings ...................................................................... 107
Steering Motor Maintenance ............................................... 108
Access to Brushes ........................................................... 108
Maintenance ..................................................................... 108
Battery .............................................................................. 109
General ............................................................................. 109
Operation .......................................................................... 109
Replacing the Battery........................................................ 109
M-5 – BRAKE PAGE SER-NR. CUT REV.
General Functional Description ......................................... 113
Removal ........................................................................... 113 ........................................................... Rev. 1 09/02
Assembly ......................................................................... 114 ........................................................... Rev. 1 09/02
Air Gap Setting ................................................................. 114 ........................................................... Rev. 1 09/02
Brake Moment Setting ...................................................... 114 ........................................................... Rev. 1 09/02
Brake Test......................................................................... 114 ........................................................... Rev. 1 09/02
M6 – STEERING PAGE SER-NR. CUT REV.
Steering ................................................................................ 119
Operation .......................................................................... 119
Steering Chain Adjustment ............................................... 119
Steering Pod Removal / Installation .................................. 120
Steering Motor Removal / Assembly ................................. 120
SteeringTransmission
Removal / Assembly......................................................... 121
Potentiometer (PTR) Installation ....................................... 122
FunctionalTest............................................................. 122
Steering Limit Switch (MF) ................................................ 122
Replacing the Steering Limit Switches ......................... 122
Limit Switch Test .......................................................... 123
Limit Switch Adjustment .............................................. 123
9. VIII
TABLE OF CONTENT
MS-LP3010/3020-GB 09/02 • Rev. A • Printed in Germany
M7 – LIFTING MECHANISM PAGE SER-NR. CUT REV.
Torques ............................................................................. 127
Fork Settings .................................................................... 127
Mast Control
(Fitted) .............................................................................. 127
Flaking .............................................................................. 127
Mast Stop Buffer .............................................................. 127
Fork Carriage Stop Screws ............................................... 127
Removing the Platform without Aux. Lift
(1200 mm lift height) ......................................................... 128
Removing the Platform with Aux. Lift
(1200 mm lift height) ......................................................... 130
Removing Platform without Aux. Lift
(1800 mm lift height) ......................................................... 133
Removing Platform with Aux. Lift
(1800 mm lift height) ......................................................... 136
Mast Rollers ......................................................................... 139
Removing the Mast Rollers ............................................... 139
Fitting the Mast Rollers ..................................................... 139
Guide Rollers ....................................................................... 139
Guide Roller Removal ....................................................... 139
Guide Roller Installation .................................................... 140
Platform Installation (all variants) ...................................... 141
Fork Carriage (Aux. Lift Only) ............................................ 142
Fork Carriage Removal ................................................ 142
Removing the Fork Carriage Rollers ............................. 143
Fork Carriage Roller Installation ................................... 143
Fork Carriage Installation ............................................. 144
Tensioning the Lift Chain .............................................. 144
Lift Chains ............................................................................ 146
General ............................................................................. 146
INSPECTION.................................................................... 146
Cleaning....................................................................... 146
Wear ............................................................................ 146
Chain Dimensions: ....................................................... 146
Freedom of Movement ................................................. 147
Chain Anchor and Pulleys ............................................ 147
Worn or Missing Plates ................................................ 147
Protruding or Turned Chain Pins ................................... 147
Corrosion ..................................................................... 148
Chain LateralWear ....................................................... 148
Misalignment of Lift Components ................................. 148
LIFT CHAIN LUBRICATION .............................................. 149
Fork Tine Test ................................................................... 150
General ........................................................................ 150
Fork Identification ........................................................ 150
Repairs ........................................................................ 150
Crack Inspection .......................................................... 150
Fork BladeWarping ...................................................... 151
Verticality Test ............................................................. 151
Measuring the Fork Tip Width ....................................... 152
ForkTine Height Difference.......................................... 152
Fork Stop ..................................................................... 152
Wear ............................................................................ 153
12. 33
MP/MS-0000-MA
SAFETY
MS/MP-LP3010/3020-GB 09/02 • Rev. A • Printed in Germany
REV. 1 4/00
OPTION
Safety Symbols used in the
Manual
To help guide you through the manual and to highlight
particular danger areas, we have used graphic illustra-
tions:
DANGER
This symbol indicates life-threatening risks
● Failure to comply with this notice may
result in severe or fatal injuries to yourself
or other people.
WARNING
This symbol indicates the risk of serious
injury and/or serious material damage.
● Failure to comply with this notice may
result in severe injuries to yourself or other
people and/or serious material damage.
CAUTION
This symbol indicates the risk of minor
injury and/or minor material damage.
● Failure to comply with this notice may
result in minor injuries to yourself or other
people and/or minor material damage.
INFORMATION
Contains additional information with
supplementary notes and hints.
OPTION
These items relate to optional features not
supplied with the standard version.
General Maintenance and Repair
Safety Notes
DANGER
Read the safety notices in the truck Mainte-
nance and Operator's Manuals.
● Failure to do so could result in severe or
fatal injuries to maintenance personnel
and/or other persons.
Motorised vehicles can be dangerous if maintenance
and service are neglected. For this reason maintenance
and inspections must be carried out at regular short
intervals by trained personnel working to approved
company guidelines.
DANGER
Follow all national/local safety regulations
applicable for maintenance work, e.g. for
work on higher levels.
● Failure to do so could result in severe or
fatal injuries to maintenance personnel
and/or other persons.
Maintenance and Repair
1. Maintenance work must only be carried out in
accordance with the test and maintenance pro-
gram contained in the present Maintenance
Manual and any applicable service notices.
2. Only qualified and authorised personnel may
carry out work on the truck.
3. Always keep fire extinguishers in good working
condition. Do not approach fluid levels or leaks
with a naked flame.
4. To clean, use a non flammable, non combustible
cleaning solution which is groundwater-neutral.
Only carry out cleaning with an oil separator.
Protect the electrical system from dampness.
5. Keep the service area clean, dry and well-venti-
lated.
6. Do not allow oil to penetrate the ground or enter
the draining system. Used oil must be recycled.
Oil filters and desiccants must be treated as
special waste products. Relevant applicable
regulations must be followed.
7. Neutralise and thoroughly rinse any spilled
battery fluid immediately.
13. 44
MP/MS-0000-MA
SAFETY
MS/MP-LP3010/3020-GB 09/02 • Rev. A • Printed in Germany
REV. 1 4/00
8. Keep the truck clean. This will facilitate the loca-
tion of loose or faulty components.
9. Make sure that capacity and data plates, warn-
ings and labels are legible at all times.
10. Alterations or modifications by the owner or
operator are not permitted without the express
written authorisation from Crown.
11. Only use original Crown spare parts to ensure the
reliability, safety and suitability of the Crown truck.
Before Leaving the Truck
● Stop the truck.
● Lower the fork carriage fully.
● Apply the parking brake.
● Turn off the truck and remove the key.
● Block all wheels when parking on an uneven
surface.
Before Carrying out Work on the Truck
● Raise the truck to free the drive wheel. Press the
emergency Stop button and disconnect the
battery.
● Prevent the truck from rolling away.
● Before carrying out work on the hoist frame, the
lift mast or on the fork carriage: Block these parts
according to maintenance instructions in order to
prevent them from dropping.
● Only carry out operational testing when there is
sufficient room to manoeuvre, to avoid the risk of
injury to yourself and others.
Before Operating the Truck
● Check the safety devices.
● Get into the driver's seat.
● Check the operation of the lifting device, travel
direction switch, speed control, steering, warning
devices and brakes.
Warnings and Labels on the Truck
During regular maintenance check that the warnings
and labels on the truck are complete and legible.
● Clean any illegible labels.
● Replace any faulty or missing labels.
The order and meaning of the warnings and labels on
the truck are described in section 10.9 of the parts
manual.
15. 7M1.0-0000-00077
INTRODUCTION
MS-LP3010/3020-GB 09/02 • Rev. A • Printed in Germany MS-ITD-3010
General
The present manual is designed for Customer Service
engineers who wish to familiarise themselves with the
maintenance work required for the various truck compo-
nents.
It also contains troubleshooting sections which can be
used to identify and remedy truck faults.
INFORMATION
This book is not an operating manual. It is
designed solely for specialist personnel
who have been trained and authorised to
carry out the work described in the manual.
This manual therefore contains fewer and less detailed
warnings than the Operator's Manual, as the latter is aimed
at persons who have very little or no prior experience at
all.
Operating Instructions
This manual contains no operating instructions. An
operating instructions manual is supplied with the vehicle.
Additional copies can be ordered as required.
With the help of this manual you and your personnel will
be able to ensure the long service life, operational safety
and error free functioning of your CROWN vehicle.
Service Training
CROWN offers the appropriate vehicle related training for
service personnel. Details on this training can be obtained
from CROWN on request.
Ordering Spare Parts
The maintenance manual does not cover spare parts.The-
se are listed in a separate manual.
Spare parts can be ordered by quoting:
● The truck specification number
● The truck model number
● The truck serial number
This information can be found on the truck's data plate.
Only if this information is provided can the order be
processed quickly, correctly and reliably.
Please refer to the Technical Specifications Sheet for the
utilisable loads, technical data and dimensions for
thisseries. Brochures can be obtained from your CROWN
dealer or from the following address:
CROWN Gabelstapler GmbH
Moosacher Str. 52
80809 Munich
GERMANY
Tel.: +49 (0)89 / 93 002 -0
Fax: +49 (0)89 / 93 002 -175 oder 133
Using the Manual
The manual is divided into sections. The following table
shows how the manual is structured.
A01M-gb
ecnanetniaMsnoitceS
noitceS noitpircseD
XDI tnetnoCfoelbaT
AM ytefaS
DTI noitcudortnI
1M tnemtsujdAdnanoitacirbuL
2M sciluardyH
3M tinUevirD
4M lacirtcelE
5M ekarB
6M gnireetS
7M msinahceMgnitfiL/tsaM
8M rednilyC
AID smargaiDlacirtcelE
DYH citamehcSciluardyH
16. 8M1.0-0000-00088
MS-LP3010/3020-GB 09/02 • Rev. A • Printed in Germany
INTRODUCTION
MS-ITD-3010
Model-Number
This manual describes the maintenance and repairs for the following truck versions:
Model-Number
Modeldescription
Mid Level Order Picker with 1.000 kg capacity
LP3010
Modeldescription
Mid Level Order Picker with 1.000 kg capacity
(incl. auxiliary lift)
LP3020
18. 1111
LUBRICATION AND ADJUSTMENT
MS-LP3010/3020-GB 09/02 • Rev. A • Printed in Germany MS-1.0-3010
Jacking up the Truck
To jack up the truck, proceed as follows:
The platform must be lowered (see illustration).
DANGER
Always support the raised truck on square
blocks or other appropriate material to
relieve the trolley. Never put your hands or
other parts of the body underneath a non-
supported truck.
● Improper handling of the truck or the
auxiliary equipment can result in fatal
accidents.
● Secure both loadwheels with a wedge (1).
● Apply a jack with sufficient capacity
(for LP without battery: > 1100 kg, with max.
battery: > 1400 kg) at the middle of the chassis
frame (2) and raise the truck (max. 20 mm).
● Place sufficiently sized wooden blocks (hard
wood) on both sides underneath the chassis and
lower the truck onto the blocks (3).
● Apply the jack to one of the outriggers.
Raise the outrigger until the loadwheel clears the
floor.
Maximum loadwheel distance off the floor 20 mm.
● Place a wooden block underneath the outrigger
and lower the outrigger onto the block (4).
● Jack up the outrigger on the other side and lower
it onto a block (5).
1
2
34
5 3
M1907
Jacking Points
19. 1212
LUBRICATION AND ADJUSTMENT
MS-LP3010/3020-GB 09/02 • Rev. A • Printed in GermanyMS-1.0-3010
Lifting the Vehicle with a Crane
Attach the chains or lifting straps as shown in Figs.
M1908 and 1909.
DANGER!
Check that both the crane/lift truck and lifting
equipment have sufficient lifting capacity.
● A toppling crane or fork-lift truck or a falling
load can cause fatal injuries.
Lifting the Vehicle with a Fork-Lift
Truck
The LP 3010 / 3020 can be raised using a fork-lift truck.
Required capacity:
for the LP without battery, 1500 kg.
● The drive wheel must be pointing straight ahead;
the platform must be fully lowered.
● Position the fork of the lifting vehicle as shown in
the diagram.
● Secure the LP firmly to the forks of the lifting
vehicle (e.g. with transport straps).
M1911
500700
1200
Towing the vehicle away
If the vehicle is de-energised the drive-wheel brake is
active. The vehicle can be lifted and towed with a mini-
mum 1400 kg capacity fork-lift truck. The load wheels
remain on the floor.
● Position the forks under the chassis as shown in
the diagram.
● Raise the vehicle (at the front end) approximately
20 mm off the ground.
WARNING!
The drive wheel must no longer touch the
ground.
● Otherwise you will damage the vehicle.
● Tow the vehicle slowly forwards and only in a
straight line (black arrow).
M1908 M1909
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. 1313
LUBRICATION AND ADJUSTMENT
MS-LP3010/3020-GB 09/02 • Rev. A • Printed in Germany MS-1.0-3010
M1963
Access to Components
Components are accessed either by unscrewing covers
or by unlocking and lifting the motor hood.
WARNING!
The battery connector must always be
pulled out before any maintenance work.
This is particularly important if plugs and
sockets have to be disconnected.
LP3010 Overview
Battery
Compartment
Load Wheels
Control Panel
Outrigger
Drive Wheel
(central)
Horn
Operator
Platform with
Fork
Strobe Light
Dead Man
Switch
Motor
Panel
OPTION
Side Casters (2x2)
Mast
22. 1414
LUBRICATION AND ADJUSTMENT
MS-LP3010/3020-GB 09/02 • Rev. A • Printed in Germany
M1958
OPTION
MS-1.0-3010
OPTION
Access to Components
LP3020 Overview
Aux. Lift Cylinder
Lift Chain
Battery
Compartment
Load
Wheels
Basic Control Panel
Outrigger
Horn
Operator Platform
Strobe Light
Dead Man
Switch
Control Panel –
Fork side
Fork
Side Casters (2x2)
Motor Panel
Drive Wheel
(central)
Mast