CraigEmry_Resume_2015-1
•
0 likes•129 views
Craig Emry has over 20 years of experience as a welder and CNC operator at Modine Manufacturing Company in Washington, Iowa. He prepares and welds various heat exchange units using blueprints and fixtures. Emry is also responsible for setting up CNC machines and ensuring parts meet specifications. He has certifications in ASME, Cat blueprint reading, geometric tolerancing, and basic CNC programming. Emry has experience welding with MIG and TIG on materials like mild steel, stainless steel, nickel, and more. He has passed welding tests with no porosity on horizontal and double-pass stainless welds.
Report
Share
Report
Share
Download to read offline
Recommended
anthony david lee
Anthony Lee is a welder and fabricator from Edmonton, Alberta with over 15 years of experience. He has extensive skills in MIG, TIG, arc and flux core welding of materials like stainless steel, aluminum, and carbon steel. Lee has worked for various companies performing tasks like welding molds, structural beams, waste bins, and elevator platforms. He has certifications in welding and safety and can operate an array of welding and fabrication machines.
Wills CV 1
William Willis has over 15 years of experience as a welder/fabricator. He has worked in various roles requiring him to read engineering drawings, cut and mark steel, perform welding and fabrication, inspect quality, and work independently and as part of a team. He is currently working as a welder at Gestamp Talent, where he quality checks robot welds and repairs defects on car subframes moving down the production line.
Investigation on Properties of Structural Steel Joints using Arc and MIG Weld...
This document investigates the properties of structural steel joints welded using arc and MIG welding processes. Mild steel plates of varying thicknesses were welded using both processes. Samples from the welded joints underwent tensile testing, impact testing, hardness testing, and microscopic analysis to evaluate and compare the mechanical properties. The investigation found that MIG welding joints produced higher mechanical properties than arc welding joints when joining mild steel plates. V-shaped joints also performed better than square butt joints.
fazil resume
This document contains the resume of Mohamed Fazil, an engineering professional seeking a new position. It summarizes his contact information, work experience including roles as a site engineer and quality control specialist in the UAE and India, education as a mechanical engineer, and personal details. His experience includes fire safety system installation, maintenance, and supervision as well as welding inspection and non-destructive testing. He is looking for a new challenging engineering role.
Kenneth Blaxton resume
Kenneth Blaxton has over 30 years of experience as a welder, pipefitter, and supervisor in various industrial settings including nuclear power plants, paper mills, and food processing facilities. He is certified in MIG and TIG welding and has experience in pipe fabrication, blueprint reading, welding, and serving as a foreman and general foreman. Most recently, he worked as a pipefitter at PCL in Cleveland, TN from 2015-2017 where he helped fabricate and install pipe systems.
Ali Aghmad CV - February 2015[1]
The document provides details about Ali Aghmad Solomon's education and welding qualifications. It outlines his objective to become a professional welder. It details his secondary education from 2009 to 2013 and an incomplete computer science degree from 2014. It lists his current enrollment at Samson's School of Welding since 2015, where he is training in various welding techniques like manual metal arc, MIG, flux cored arc, and tungsten inert gas welding on metals like steel, stainless steel and aluminum. It covers welding certifications to ASME quality levels in structural positions and on pipes. It expresses Ali's motivation and enjoyment of welding and attention to detail.
mark cv
Mark Beer has over 30 years of experience in welding, inspection, and fabrication. He currently works as a Senior Welding Inspector at Fairwood Fabrications, where he supervises a team of NDT technicians to ensure compliance with welding standards. Previously, he worked as a Welding Engineer at Oil and Gas Services Ltd where he was responsible for welding activities and documentation on oil and gas pipelines. He holds several qualifications in welding inspection and non-destructive testing.
Pratham Enterprise, Rajko, Metal Products
Pratham Enterprise manufactures, trades, and distributes a wide range of products including perforated sheets, expanded metals, cable trays, weld mesh, and GI earthing strips. It sources high quality products from reputable vendors and offers them to customers. The company aims to understand customer requirements and sources products accordingly from trusted vendors.
Recommended
anthony david lee
Anthony Lee is a welder and fabricator from Edmonton, Alberta with over 15 years of experience. He has extensive skills in MIG, TIG, arc and flux core welding of materials like stainless steel, aluminum, and carbon steel. Lee has worked for various companies performing tasks like welding molds, structural beams, waste bins, and elevator platforms. He has certifications in welding and safety and can operate an array of welding and fabrication machines.
Wills CV 1
William Willis has over 15 years of experience as a welder/fabricator. He has worked in various roles requiring him to read engineering drawings, cut and mark steel, perform welding and fabrication, inspect quality, and work independently and as part of a team. He is currently working as a welder at Gestamp Talent, where he quality checks robot welds and repairs defects on car subframes moving down the production line.
Investigation on Properties of Structural Steel Joints using Arc and MIG Weld...
This document investigates the properties of structural steel joints welded using arc and MIG welding processes. Mild steel plates of varying thicknesses were welded using both processes. Samples from the welded joints underwent tensile testing, impact testing, hardness testing, and microscopic analysis to evaluate and compare the mechanical properties. The investigation found that MIG welding joints produced higher mechanical properties than arc welding joints when joining mild steel plates. V-shaped joints also performed better than square butt joints.
fazil resume
This document contains the resume of Mohamed Fazil, an engineering professional seeking a new position. It summarizes his contact information, work experience including roles as a site engineer and quality control specialist in the UAE and India, education as a mechanical engineer, and personal details. His experience includes fire safety system installation, maintenance, and supervision as well as welding inspection and non-destructive testing. He is looking for a new challenging engineering role.
Kenneth Blaxton resume
Kenneth Blaxton has over 30 years of experience as a welder, pipefitter, and supervisor in various industrial settings including nuclear power plants, paper mills, and food processing facilities. He is certified in MIG and TIG welding and has experience in pipe fabrication, blueprint reading, welding, and serving as a foreman and general foreman. Most recently, he worked as a pipefitter at PCL in Cleveland, TN from 2015-2017 where he helped fabricate and install pipe systems.
Ali Aghmad CV - February 2015[1]
The document provides details about Ali Aghmad Solomon's education and welding qualifications. It outlines his objective to become a professional welder. It details his secondary education from 2009 to 2013 and an incomplete computer science degree from 2014. It lists his current enrollment at Samson's School of Welding since 2015, where he is training in various welding techniques like manual metal arc, MIG, flux cored arc, and tungsten inert gas welding on metals like steel, stainless steel and aluminum. It covers welding certifications to ASME quality levels in structural positions and on pipes. It expresses Ali's motivation and enjoyment of welding and attention to detail.
mark cv
Mark Beer has over 30 years of experience in welding, inspection, and fabrication. He currently works as a Senior Welding Inspector at Fairwood Fabrications, where he supervises a team of NDT technicians to ensure compliance with welding standards. Previously, he worked as a Welding Engineer at Oil and Gas Services Ltd where he was responsible for welding activities and documentation on oil and gas pipelines. He holds several qualifications in welding inspection and non-destructive testing.
Pratham Enterprise, Rajko, Metal Products
Pratham Enterprise manufactures, trades, and distributes a wide range of products including perforated sheets, expanded metals, cable trays, weld mesh, and GI earthing strips. It sources high quality products from reputable vendors and offers them to customers. The company aims to understand customer requirements and sources products accordingly from trusted vendors.
Dylan Foster
Dylan Foster is a welder from Lincoln, NE with experience in customer service and welding. He completed a combination structural and pipe welding program at Hobart Institute of Welding Technology from 2015-2016 and holds several AWS welding certifications including D1.1 for shielded metal arc welding on 8-inch pipe and flux cored arc welding on 1-inch plate. His previous work experience includes customer service representative roles where he assisted customers and salespeople.
tyrone draft 2 NEW
Tyrone Lloyd Wiggan is a multi-skilled welder with over 15 years of experience welding and fabricating stainless steel and other metals both on and offshore. He has extensive experience working with specialist welding machines and tools and has an excellent safety record. Wiggan is currently looking for new opportunities to further develop his skills. His professional experience includes roles installing wind turbine components, mechanical fitting, welding, rigging, and bolting at various companies. He has qualifications in welding, confined space training, working at heights, and first aid.
APEX'S FAB ENGG(1)
Apex's Fab Engineering is an Indian fabrication and manufacturing company that specializes in producing pressure vessels, heat exchangers, reactors, and other process equipment for industries like chemicals, oil and gas, and power. The company aims to provide quality products on time while maintaining high standards for safety, quality control, and environmental protection. It has manufacturing facilities in Vadodara and Ahmedabad, Gujarat with over 10,000 square feet of workspace and equipment like welding machines, lathes, and an EOT crane. Apex's Fab Engineering serves clients across Gujarat in industries like concrete, mining, and construction.
Ayam Weldmesh
We are leading manufacturers of G.I. & M.S. Welded Wire Mesh, Chain Link Fencing, Concertina & RBT Coil.
tbuckresume1
Thomas O. Buck Jr. is seeking a challenging position utilizing his 14 years of experience in EDM and NDT calibration, 30 years of manual machining experience, and 20 years of management and supervisory experience. He has worked in various roles involving CNC machining, diamond bit fabrication, instrumentation, design engineering, welding, and sheet metal work. His objective is to obtain a position that allows growth within a growing company.
Dave Hopson CV
David Hopson is a highly skilled and experienced welder with over 15 years of experience in welding carbon steel, stainless steel, and other alloys in various industries. He has extensive fabrication and fitting experience and qualifications in TIG, MIG, MMA, and FCAW welding. He is coded to international standards for welding pipework and vessels to stringent quality standards. He has a strong work ethic and takes pride in his precision and ability to meet deadlines.
Malabou Brochure december 2015
Malabou Limited is an engineering solutions company that provides manufacturing and testing capabilities. They work with customers to understand their requirements and ensure quality standards are met. Malabou has facilities for metal injection moulding, forging, casting, machining, heavy fabrication, heat treatment, and surface engineering. They also have in-house testing labs for mechanical testing, metal chemistry analysis, metallography, heat treatment testing, non-destructive testing, and geometric verification to ensure product quality. Malabou aims to deliver high quality products at globally competitive prices.
Christopher_Collins_Resume__2016
Christopher Collins is an Airfield Operations Officer with over 11 years of experience in the US Air Force. He has 8 years of managerial experience leading teams of up to 130 people. He has extensive technical expertise in avionics systems maintenance and air traffic control. Currently pursuing his MBA with a 4.0 GPA, he also has a BS in Professional Aeronautics and an AS in Avionics Systems Technology.
Ed Rapp New Resume Revised July 2016
Ed Rapp is seeking a position in building facilities/maintenance/management with over 30 years of experience. He has extensive skills in electrical, plumbing, carpentry, and hazardous waste handling. His most recent role was as Building Facilities Maintenance Manager for the Napa Valley Opera House for 8 years. He is proficient in maintenance, repairs, inspections, and coordinating contractors. Rapp has a high school diploma and some college education, along with various trade school training.
Elizabeth Hill- admin 161017
This document is a resume for Elizabeth Hill that outlines her objective, qualifications, education, affiliations, recent work experience, and previous professional experience. She has a Bachelor's degree in Architecture from UC Berkeley and an Associate's degree in Landscape Design and Horticulture. Her qualifications include skills in design software, customer service experience since 2009, and project management experience in an urban design studio setting. Her recent work includes temporary positions as a receptionist and administrative assistant, as well as retail experience at Orchard Supply Hardware. Previous professional experience includes being a landscape consultant, urban designer, and landscape designer/project manager.
Christy M Lindros - resume
Christy Lindros is seeking an entry-level paralegal position with skills in client relations, operations, and as a recent graduate with an Associate's degree in Paralegal Studies. She has experience in customer service, billing, account investigations, and legal research from her current role as a Call Center Associate and her education. Lindros also has experience working with children as a teacher's aide and crossing guard.
Christine erdman resume ov3
Dedicated educator committed to creating a classroom atmosphere that is stimulating, productive and supportive for all students. Fostering the three R’s in students: Respect,
Responsibility and Resourcefulness.
Creación de un consejo que regule los planes de desarrollo del Distrito Feder...
Creación de un consejo que regule los planes de desarrollo del Distrito Feder...Academia de Ingeniería de México
El documento propone la creación de un Consejo que regule los planes de desarrollo del Distrito Federal y su Zona Conurbada para coordinar de manera integral las diferentes entidades gubernamentales y regular el crecimiento de la Ciudad de México de acuerdo a sus recursos naturales. Actualmente, la ciudad creció de manera desordenada sin un plan integral y esto generó diversos problemas relacionados con el abastecimiento, la basura y la falta de planeación vial. La creación de este Consejo, con autoridad delegada y apoyado por profesionalesCurrent_Resume_Mathew_Hoole_171016
Mathew Hoole provides his resume detailing work experience, education, and qualifications. He has over 10 years of experience in computer retail and technical support. Most recently, he worked in payroll and administrative roles for the Australian Electoral Commission, a building company, and Telstra dealerships performing tasks like data entry, invoice processing, training, and financial reporting. He holds an Advanced Diploma in Accounting and other certificates in customer service, workplace safety, and Telstra solutions. References are provided from various employers.
Clees Luke -HR Resume
Lukas Clees is seeking a position as a Human Resources Generalist. He has experience as a Medical Assistant and 10 years of active military service in the Navy. Clees has strong communication, problem-solving, and administrative skills. He is completing his Bachelor's degree in Human Resources at Trine University.
ChristopherParrishResume
The document is a resume for Christopher Stephen Parrish. It summarizes his experience as a strategic and motivated technical expert in the US Navy, where he held several roles overseeing maintenance and managing teams. His responsibilities included supervising work centers, managing preventative and corrective maintenance, mentoring sailors, and improving calibration standards. He is seeking a new opportunity utilizing his skills in technical expertise, leadership, and problem solving.
Cmf resume 1.docx (6)
Christine Fraser has over 20 years of experience managing commercial real estate portfolios totaling over 2 million square feet. She has expertise in transaction management, project management, property management, facilities management, workplace strategies, client relationship management, and lease administration. Fraser has held property management roles at US Bank, Wells Fargo Bank, Construction Support Services, Fuller & Company, and Travelers Insurance Company. She is skilled in budgeting, contract management, and resolving issues for landlords and tenants.
cbyrne cv welder
Ciaran Byrne is applying for a position and provides his curriculum vitae. He has over 5 years of experience as a fabricator welder, working on structural and offshore projects. He lists his work history and qualifications, which include welding certifications and an engineering technology diploma from Northern Regional College.
Indeed Resume 2016
Richard Estrella has over 7 years of experience as a millwright, pipefitter, and welder. He has expertise in industrial process piping and maintenance in the oil and gas industry. He is knowledgeable in welding, pipefitting, machinery repair, and precision measurement. Richard is willing to relocate for work and has experience in California.
Design & developement of swing frame testing fixture of Bandsaw Machine.
The document describes the design and development of a testing fixture for the swing frame of a bandsaw machine. Key details include:
- The fixture was created to reduce inspection time and improve accuracy by properly aligning and drilling holes in the swing frame.
- Materials like mild steel, EN24 and EN8 were selected for different fixture components based on properties like strength, machinability and wear resistance.
- The design of the fixture was tested and different plates were allocated to wing positions to locate and securely hold the swing frame for drilling operations.
- The fixture allows for reduced manufacturing cycle time and increased precision, reliability and productivity when inspecting the swing frame.
CAWI resumee
This document is a resume for Micah Marcella, a certified CAWI welder and boilermaker with over 10 years of experience welding various metals using techniques like GTAW, SMAW, and FCAW. Marcella has worked on projects for companies in industries like nuclear, coal, natural gas, and more. Marcella holds many certifications and safety training certificates and is looking to gain new employment in the inspection industry.
CV
Jacob Stone is a welder and fabricator with over 10 years of experience welding steel, aluminum, and stainless steel using various techniques. He has worked in shipbuilding and on various fabrication projects. He has qualifications in welding, health and safety, crane operation, and first aid. He is skilled in MIG, TIG, MMA welding and fabrication. He is looking for new opportunities as a welder and fabricator where he can apply his skills and experience.
More Related Content
What's hot
Dylan Foster
Dylan Foster is a welder from Lincoln, NE with experience in customer service and welding. He completed a combination structural and pipe welding program at Hobart Institute of Welding Technology from 2015-2016 and holds several AWS welding certifications including D1.1 for shielded metal arc welding on 8-inch pipe and flux cored arc welding on 1-inch plate. His previous work experience includes customer service representative roles where he assisted customers and salespeople.
tyrone draft 2 NEW
Tyrone Lloyd Wiggan is a multi-skilled welder with over 15 years of experience welding and fabricating stainless steel and other metals both on and offshore. He has extensive experience working with specialist welding machines and tools and has an excellent safety record. Wiggan is currently looking for new opportunities to further develop his skills. His professional experience includes roles installing wind turbine components, mechanical fitting, welding, rigging, and bolting at various companies. He has qualifications in welding, confined space training, working at heights, and first aid.
APEX'S FAB ENGG(1)
Apex's Fab Engineering is an Indian fabrication and manufacturing company that specializes in producing pressure vessels, heat exchangers, reactors, and other process equipment for industries like chemicals, oil and gas, and power. The company aims to provide quality products on time while maintaining high standards for safety, quality control, and environmental protection. It has manufacturing facilities in Vadodara and Ahmedabad, Gujarat with over 10,000 square feet of workspace and equipment like welding machines, lathes, and an EOT crane. Apex's Fab Engineering serves clients across Gujarat in industries like concrete, mining, and construction.
Ayam Weldmesh
We are leading manufacturers of G.I. & M.S. Welded Wire Mesh, Chain Link Fencing, Concertina & RBT Coil.
tbuckresume1
Thomas O. Buck Jr. is seeking a challenging position utilizing his 14 years of experience in EDM and NDT calibration, 30 years of manual machining experience, and 20 years of management and supervisory experience. He has worked in various roles involving CNC machining, diamond bit fabrication, instrumentation, design engineering, welding, and sheet metal work. His objective is to obtain a position that allows growth within a growing company.
Dave Hopson CV
David Hopson is a highly skilled and experienced welder with over 15 years of experience in welding carbon steel, stainless steel, and other alloys in various industries. He has extensive fabrication and fitting experience and qualifications in TIG, MIG, MMA, and FCAW welding. He is coded to international standards for welding pipework and vessels to stringent quality standards. He has a strong work ethic and takes pride in his precision and ability to meet deadlines.
Malabou Brochure december 2015
Malabou Limited is an engineering solutions company that provides manufacturing and testing capabilities. They work with customers to understand their requirements and ensure quality standards are met. Malabou has facilities for metal injection moulding, forging, casting, machining, heavy fabrication, heat treatment, and surface engineering. They also have in-house testing labs for mechanical testing, metal chemistry analysis, metallography, heat treatment testing, non-destructive testing, and geometric verification to ensure product quality. Malabou aims to deliver high quality products at globally competitive prices.
What's hot (7)
Viewers also liked
Christopher_Collins_Resume__2016
Christopher Collins is an Airfield Operations Officer with over 11 years of experience in the US Air Force. He has 8 years of managerial experience leading teams of up to 130 people. He has extensive technical expertise in avionics systems maintenance and air traffic control. Currently pursuing his MBA with a 4.0 GPA, he also has a BS in Professional Aeronautics and an AS in Avionics Systems Technology.
Ed Rapp New Resume Revised July 2016
Ed Rapp is seeking a position in building facilities/maintenance/management with over 30 years of experience. He has extensive skills in electrical, plumbing, carpentry, and hazardous waste handling. His most recent role was as Building Facilities Maintenance Manager for the Napa Valley Opera House for 8 years. He is proficient in maintenance, repairs, inspections, and coordinating contractors. Rapp has a high school diploma and some college education, along with various trade school training.
Elizabeth Hill- admin 161017
This document is a resume for Elizabeth Hill that outlines her objective, qualifications, education, affiliations, recent work experience, and previous professional experience. She has a Bachelor's degree in Architecture from UC Berkeley and an Associate's degree in Landscape Design and Horticulture. Her qualifications include skills in design software, customer service experience since 2009, and project management experience in an urban design studio setting. Her recent work includes temporary positions as a receptionist and administrative assistant, as well as retail experience at Orchard Supply Hardware. Previous professional experience includes being a landscape consultant, urban designer, and landscape designer/project manager.
Christy M Lindros - resume
Christy Lindros is seeking an entry-level paralegal position with skills in client relations, operations, and as a recent graduate with an Associate's degree in Paralegal Studies. She has experience in customer service, billing, account investigations, and legal research from her current role as a Call Center Associate and her education. Lindros also has experience working with children as a teacher's aide and crossing guard.
Christine erdman resume ov3
Dedicated educator committed to creating a classroom atmosphere that is stimulating, productive and supportive for all students. Fostering the three R’s in students: Respect,
Responsibility and Resourcefulness.
Creación de un consejo que regule los planes de desarrollo del Distrito Feder...
Creación de un consejo que regule los planes de desarrollo del Distrito Feder...Academia de Ingeniería de México
El documento propone la creación de un Consejo que regule los planes de desarrollo del Distrito Federal y su Zona Conurbada para coordinar de manera integral las diferentes entidades gubernamentales y regular el crecimiento de la Ciudad de México de acuerdo a sus recursos naturales. Actualmente, la ciudad creció de manera desordenada sin un plan integral y esto generó diversos problemas relacionados con el abastecimiento, la basura y la falta de planeación vial. La creación de este Consejo, con autoridad delegada y apoyado por profesionalesCurrent_Resume_Mathew_Hoole_171016
Mathew Hoole provides his resume detailing work experience, education, and qualifications. He has over 10 years of experience in computer retail and technical support. Most recently, he worked in payroll and administrative roles for the Australian Electoral Commission, a building company, and Telstra dealerships performing tasks like data entry, invoice processing, training, and financial reporting. He holds an Advanced Diploma in Accounting and other certificates in customer service, workplace safety, and Telstra solutions. References are provided from various employers.
Clees Luke -HR Resume
Lukas Clees is seeking a position as a Human Resources Generalist. He has experience as a Medical Assistant and 10 years of active military service in the Navy. Clees has strong communication, problem-solving, and administrative skills. He is completing his Bachelor's degree in Human Resources at Trine University.
ChristopherParrishResume
The document is a resume for Christopher Stephen Parrish. It summarizes his experience as a strategic and motivated technical expert in the US Navy, where he held several roles overseeing maintenance and managing teams. His responsibilities included supervising work centers, managing preventative and corrective maintenance, mentoring sailors, and improving calibration standards. He is seeking a new opportunity utilizing his skills in technical expertise, leadership, and problem solving.
Cmf resume 1.docx (6)
Christine Fraser has over 20 years of experience managing commercial real estate portfolios totaling over 2 million square feet. She has expertise in transaction management, project management, property management, facilities management, workplace strategies, client relationship management, and lease administration. Fraser has held property management roles at US Bank, Wells Fargo Bank, Construction Support Services, Fuller & Company, and Travelers Insurance Company. She is skilled in budgeting, contract management, and resolving issues for landlords and tenants.
Viewers also liked (10)
Creación de un consejo que regule los planes de desarrollo del Distrito Feder...
Creación de un consejo que regule los planes de desarrollo del Distrito Feder...
Similar to CraigEmry_Resume_2015-1
cbyrne cv welder
Ciaran Byrne is applying for a position and provides his curriculum vitae. He has over 5 years of experience as a fabricator welder, working on structural and offshore projects. He lists his work history and qualifications, which include welding certifications and an engineering technology diploma from Northern Regional College.
Indeed Resume 2016
Richard Estrella has over 7 years of experience as a millwright, pipefitter, and welder. He has expertise in industrial process piping and maintenance in the oil and gas industry. He is knowledgeable in welding, pipefitting, machinery repair, and precision measurement. Richard is willing to relocate for work and has experience in California.
Design & developement of swing frame testing fixture of Bandsaw Machine.
The document describes the design and development of a testing fixture for the swing frame of a bandsaw machine. Key details include:
- The fixture was created to reduce inspection time and improve accuracy by properly aligning and drilling holes in the swing frame.
- Materials like mild steel, EN24 and EN8 were selected for different fixture components based on properties like strength, machinability and wear resistance.
- The design of the fixture was tested and different plates were allocated to wing positions to locate and securely hold the swing frame for drilling operations.
- The fixture allows for reduced manufacturing cycle time and increased precision, reliability and productivity when inspecting the swing frame.
CAWI resumee
This document is a resume for Micah Marcella, a certified CAWI welder and boilermaker with over 10 years of experience welding various metals using techniques like GTAW, SMAW, and FCAW. Marcella has worked on projects for companies in industries like nuclear, coal, natural gas, and more. Marcella holds many certifications and safety training certificates and is looking to gain new employment in the inspection industry.
CV
Jacob Stone is a welder and fabricator with over 10 years of experience welding steel, aluminum, and stainless steel using various techniques. He has worked in shipbuilding and on various fabrication projects. He has qualifications in welding, health and safety, crane operation, and first aid. He is skilled in MIG, TIG, MMA welding and fabrication. He is looking for new opportunities as a welder and fabricator where he can apply his skills and experience.
Jonathan Buckley's resume
Jonathan Ivy Buckley is seeking a long-term position as a welder that utilizes teamwork. He has an education in welding and fabrication technology from Central Louisiana Technical Community College. His skills include MIG welding, pipe fitting, structural welding, shaping and cutting. His work experience includes welding tank cars at UTLX where he fabricated parts from blueprints and ensured measurements met specifications. He also has experience removing dents and painting exteriors of cars as a body shop technician.
Challenges in Heavy Manufacturing
This document discusses challenges in heavy manufacturing, specifically predicting and controlling weld distortion. It outlines the consequences of weld distortion such as additional fitting costs, increased weld time, and compromised structural integrity. It then describes various types of distortion and explains that mitigating distortion can be expensive and time-consuming. Methods for predicting distortion include thermal elastic-plastic finite element analysis, inherent strain methods, and plasticity-based analysis. Software tools like WeldFEA, Q-Weld, and WeldPredictor can evaluate fixture issues, select welding parameters, optimize sequences, and determine pre-bending needs. The document provides an example of savings from controlling buckling during shipbuilding.
P&r group ppt
This company was founded in 1986 and specializes in steel structure engineering, thermal plant structures, and civil engineering projects. It has 500 permanent employees and works on various projects sites with 5,000 locally employed staff. The company has received ISO certification and is approved by RDSO for fabrication and supply of steel bridge girders. It is currently ranked 38th among India's fast growing mid-size companies. The document then provides details about a specific project to fabricate and erect steel plate girders for a road over bridge, including the scope of work and specifications of the company's workshop where fabrication will occur.
LinkedIn Profile template
This LinkedIn profile belongs to Kevin Dixon, who works as a welder and fabricator in Yorkshire, England. Kevin has over 15 years of experience in welding, fabrication, and engineering maintenance roles. He is skilled in various welding techniques including MMA, MIG, and TIG welding. Kevin is also highly organized, a strong team player, and dedicated to providing excellent customer service.
Thomas Martin Resume (1)
Thomas Martin has over 30 years of experience in welding, fabrication, and construction. He is skilled in MIG, TIG, stick welding, and flux core welding. He is AWS certified and has extensive experience designing and fabricating structures like machine guarding, trailers, hoists, and more for customers like Pinnacle Foods. He has worked as an owner/operator of his own fabrication business since 2012 and has held roles in excavating, ground operations for Southwest Airlines, and as a grade checker and equipment operator for Kiewitt Construction.
Lectures Note 3. Fabrication.pptx
The document discusses fabrication processes including welding technology and supervision. Fabrication can occur at shops or on-site, with shops providing better quality control but posing transportation challenges. Various welding types are outlined including manual metal arc welding and gas metal arc welding. Regular inspection of welds includes visual examination of dimensions, penetration, and surface defects to ensure quality. Non-destructive testing methods like dye-penetration, magnetic particle testing, radiography, and ultrasonics are also used.
Presentation on Air Heater Inspection
Presentation on Air Heater Inspection Summit Power International https://summitpowerinternational.com/
The document summarizes the inspection of heat exchangers conducted by engineers from the Multinational Fertilizer Company and GEA at GEA's facility in Wingles, France. Key points from the inspection include: pressure testing and dimensional checking of the heat exchangers; reviewing material certifications and weld documentation; and inspecting the packaging and crating of the units. The inspection concluded with both parties signing off on the required documentation.Framech product brochure 2019
This document summarizes Framech Industries, a manufacturer of precision engineered components from various metals. It produces parts for industries using casting, forging, machining and other processes. It aims to provide quality products to customers globally on time and with 24/7 support. The company manufactures a wide range of parts for pneumatic, hydraulic and electrical applications from materials like brass and stainless steel.
Cswip welding inspection notes and questions
The document discusses the duties of a welding inspector, including visual inspection of welds to identify defects and ensure they meet acceptance criteria. It describes tools that can aid inspection like magnification lenses. It outlines a code of practice for an inspection department, including checking documents, materials, equipment and welder qualifications before welding, monitoring the welding process and variables during welding, and inspecting the final weld for defects, dimensions and heat treatment after welding. Repairs should follow an authorized procedure and be re-inspected upon completion.
Twi cswip welding inspection notes and questions
The document discusses the duties of a welding inspector, including visual inspection of welds to identify defects and ensure they meet acceptance criteria. It describes tools that can aid inspection like magnification lenses. It outlines a code of practice for an inspection department, including checking documents, materials, equipment and welder qualifications before welding, monitoring the welding process and variables during welding, and inspecting the final weld for defects, dimensions and heat treatment after welding. Repairs should follow an authorized procedure and be re-inspected upon completion.
Cswip welding-inspection-notes-and-questions-1
This document provides an overview of welding inspection for steels. It defines key terminology related to welding and discusses the duties of a welding inspector, including visual inspection, use of aids, and following inspection codes and standards. It also covers welding procedures, essential variables, joint preparation, weld sizes, defects, testing methods, and more. The goal is to provide comprehensive guidance on properly inspecting welded steel structures.
Ch23
The document discusses cutting tool technology, including tool materials, geometry, and failure modes. It describes how tool life is influenced by cutting speed and material properties. Common tool materials include high-speed steel, cemented carbides, ceramics, and coatings. Tool geometry depends on the operation, with single-point and multiple-point tools discussed. Twist drills are a type of multiple-point tool used for hole making.
Resume welder
Janelle Lydic is seeking a welding position and has over 10 years of experience as a contracted welder working with various materials like pipe, stainless steel, titanium, and nickel. She is certified to weld on submarine pressure hulls and has experience in areas like aerospace, shipbuilding, and general contracting. She has an educational background that includes welding certifications, CAD training, and drafting.
res1
Cameron Jones is seeking employment as a welder where he can utilize his welding skills. He graduated in 2015 with a Structural Welding Diploma from Calumet Welding Center and is AWS certified in SMAW and FCAW. His previous welding experience includes working as a welder at Aerotek performing FCAW and SAW on thick steel and at Brennan Equipment assembling products using GMAW from instructions and blueprints.
Similar to CraigEmry_Resume_2015-1 (20)
Design & developement of swing frame testing fixture of Bandsaw Machine.
Design & developement of swing frame testing fixture of Bandsaw Machine.
CraigEmry_Resume_2015-1
- 1. CRAIG EMRY Welder & CNC Operator 201 E. Madison Street, Brighton IA, 52540 cmemry178@gmail.com 641.451.7781 WORK EXPERIENCE 1997 - Current Welder Modine Manufacturing Company Washington, IA By the use of blueprints and fixturing gather parts and prep parts tack weld and finish weld and assemble various heat exchange units for large industrial equipment. Was responsible for setting up CNC's with appropriate fixtures and tooling and making sure parts we're within nominal specifications, from piece parts to finished units. Experience with digital calipers, height gauges, snap gauges, bore gauges, pin guages, thread gauges, unified and pipe threads, and edge finders. COURSES & CERTIFICATIONS ASME Certification Caterpillar Blueprint Reading Geometric Tolerancing Basic CNC Programming Weld Symbol Training SKILLS MIG Weld Experience Mild steel stainless steel and nickel .035 wire. TIG Weld Experience Mild steel, ER 312 stainless, Cuper nickel, Ernie 1, silicon bronze, aluminum bronze, Hastelloy. General Welding Tests Passed four horizonal Mig and TIG test no porosity. Passed three other double-pass stainless TIG weld tank to bar tests one for Detroit Diesel two for caterpillar.