The document describes an industrial high temperature fan series with F driving. It discusses the fan's purpose of handling high temperature gases up to 450°C, its standard models, rotation directions and outlet angles. It also summarizes the fan's main components, including the impeller, fan casing, inlet chamber, main shaft, bearings and accessories like the differential inlet vane gear.
Since they were developed over sixty years ago,
customers have come to trust the compact, heavy-duty
design of Flygt submersible pumps. The Flygt brand
was the first to provide a practical, heavy-duty electric
submersible pump that could withstand the severe
demands of construction site and mine dewatering
and yet still offer total portability
Volvo ec700 c l ec700cl excavator service repair manualfjjsekksekmm
The document contains information about the power transmission system and track gearbox of an excavator. It describes how mechanical power from the engine is converted to hydraulic power and then back to mechanical power to operate functions like travel, slewing and attachments. It provides descriptions, illustrations and maintenance procedures for the track gearbox, including removing, installing, troubleshooting, specifications and precautions for operation. Lubrication oil type and filling procedures are also outlined.
Hyster (k177) h50 xm forklift service repair manualfjskekfkemm
This document provides repair instructions for GM engines, including the 4-153, 4-181, 3.0L, and 6-250 engines. It describes the cylinder head and valve mechanism repair process. This involves removing and disassembling the cylinder head, cleaning and inspecting components, lapping valves and seats if needed, and reassembling the cylinder head. Precautions are outlined to prevent damage to parts. The document also provides specifications for valve guides, stems, springs, and seats.
Hyster (k177) h45 xm forklift service repair manualfjjkskekfsmem
This document provides instructions for servicing GM engines used in lift trucks from 1975-1990. It describes the removal and cleaning of the cylinder head and valve components. Key points:
- The engines covered include 4-cylinder and 6-cylinder models used in trucks from 2-7.5 tons.
- Cylinder head removal requires draining fluids, disconnecting components, and loosening bolts in steps.
- Valve disassembly uses a compressor tool to remove springs and retainers. Components are cleaned and inspected.
- Valve and valve guide clearances are checked, and lapping or reaming may be needed for correct clearance. Valve springs are also tested.
Hyster (K177) H45XM Forklift Service Repair Manualfjksekmdmm
This is the Highly Detailed factory service repair manual for theHYSTER (K177) H45XM FORKLIFT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.HYSTER (K177) H45XM FORKLIFT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Instruction for the engine Disassembly, Cleaning, Assembly, Specifications and Troubleshooting
Alternator with Regulator (Delco, Motorola, and Leece-Neville)
Frame
Cooling System (Description, Cooling System Checks, Radiator Cleaning, Troubleshooting)
LPG Fuel System (GM 2.2L and 3.0L Engines)
Single-Speed Powershift Transmission
The Steering Control Unit and Hydraulic System
Steering Axle and Hydraulic System
Brake System
Hydraulic System and the Gear Pump Assembly
Main Control Valve
Tilt Cylinder
Starter Repair
Electronic Engine Control (GM 2.2L) Troubleshooting and Repair
Steering Column
Microprocessor Spark Timing System
Electrical Systems used on the Mazda M4-2.0G Gasoline or LPG Engine
Electronic Engine Control
Lift Cylinders
Mast
Metric and Inch (SAE) Fasteners
Periodic Maintenance
Diagrams
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveHYSTER (K177) H45XM FORKLIFT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Hyster (k177) h55 xm forklift service repair manualfjjkefkksem
This document provides instructions for servicing GM engines used in lift trucks from 1975-1990. It describes the engine models, components and specifications. The summary is:
1) The document covers repair instructions for GM 4-cylinder and 6-cylinder engines used in lift trucks, including removal and installation of the cylinder head and valve mechanism.
2) It provides warnings about working with asbestos materials and cautions about electrical work.
3) The document describes the engine models, components like pistons and crankshaft, and specifications to use during repair. Removal and installation of the entire engine is not covered.
Hyster (k177) h60 xm forklift service repair manualfjskefkksem
This document provides repair instructions for GM engines, including the 4-153, 4-181, 3.0L, and 6-250 engines. It describes the cylinder head and valve mechanism repair process. This involves removing and disassembling the cylinder head, cleaning and inspecting components, lapping valves and seats if needed, and reassembling the cylinder head. Precautions are outlined to prevent damage to parts during the repair process.
Volvo ec700 c ld ec700cld excavator service repair manualfjjsekksekmm
The document contains information about the power transmission system and track gearbox of an excavator. It describes how mechanical power from the engine is converted to hydraulic power which powers the travel motors, slew motor, and hydraulic cylinders. It also provides descriptions, illustrations and removal/installation instructions for the track gearbox, along with maintenance standards, troubleshooting tips, and precautions for operation.
Since they were developed over sixty years ago,
customers have come to trust the compact, heavy-duty
design of Flygt submersible pumps. The Flygt brand
was the first to provide a practical, heavy-duty electric
submersible pump that could withstand the severe
demands of construction site and mine dewatering
and yet still offer total portability
Volvo ec700 c l ec700cl excavator service repair manualfjjsekksekmm
The document contains information about the power transmission system and track gearbox of an excavator. It describes how mechanical power from the engine is converted to hydraulic power and then back to mechanical power to operate functions like travel, slewing and attachments. It provides descriptions, illustrations and maintenance procedures for the track gearbox, including removing, installing, troubleshooting, specifications and precautions for operation. Lubrication oil type and filling procedures are also outlined.
Hyster (k177) h50 xm forklift service repair manualfjskekfkemm
This document provides repair instructions for GM engines, including the 4-153, 4-181, 3.0L, and 6-250 engines. It describes the cylinder head and valve mechanism repair process. This involves removing and disassembling the cylinder head, cleaning and inspecting components, lapping valves and seats if needed, and reassembling the cylinder head. Precautions are outlined to prevent damage to parts. The document also provides specifications for valve guides, stems, springs, and seats.
Hyster (k177) h45 xm forklift service repair manualfjjkskekfsmem
This document provides instructions for servicing GM engines used in lift trucks from 1975-1990. It describes the removal and cleaning of the cylinder head and valve components. Key points:
- The engines covered include 4-cylinder and 6-cylinder models used in trucks from 2-7.5 tons.
- Cylinder head removal requires draining fluids, disconnecting components, and loosening bolts in steps.
- Valve disassembly uses a compressor tool to remove springs and retainers. Components are cleaned and inspected.
- Valve and valve guide clearances are checked, and lapping or reaming may be needed for correct clearance. Valve springs are also tested.
Hyster (K177) H45XM Forklift Service Repair Manualfjksekmdmm
This is the Highly Detailed factory service repair manual for theHYSTER (K177) H45XM FORKLIFT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.HYSTER (K177) H45XM FORKLIFT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Instruction for the engine Disassembly, Cleaning, Assembly, Specifications and Troubleshooting
Alternator with Regulator (Delco, Motorola, and Leece-Neville)
Frame
Cooling System (Description, Cooling System Checks, Radiator Cleaning, Troubleshooting)
LPG Fuel System (GM 2.2L and 3.0L Engines)
Single-Speed Powershift Transmission
The Steering Control Unit and Hydraulic System
Steering Axle and Hydraulic System
Brake System
Hydraulic System and the Gear Pump Assembly
Main Control Valve
Tilt Cylinder
Starter Repair
Electronic Engine Control (GM 2.2L) Troubleshooting and Repair
Steering Column
Microprocessor Spark Timing System
Electrical Systems used on the Mazda M4-2.0G Gasoline or LPG Engine
Electronic Engine Control
Lift Cylinders
Mast
Metric and Inch (SAE) Fasteners
Periodic Maintenance
Diagrams
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveHYSTER (K177) H45XM FORKLIFT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Hyster (k177) h55 xm forklift service repair manualfjjkefkksem
This document provides instructions for servicing GM engines used in lift trucks from 1975-1990. It describes the engine models, components and specifications. The summary is:
1) The document covers repair instructions for GM 4-cylinder and 6-cylinder engines used in lift trucks, including removal and installation of the cylinder head and valve mechanism.
2) It provides warnings about working with asbestos materials and cautions about electrical work.
3) The document describes the engine models, components like pistons and crankshaft, and specifications to use during repair. Removal and installation of the entire engine is not covered.
Hyster (k177) h60 xm forklift service repair manualfjskefkksem
This document provides repair instructions for GM engines, including the 4-153, 4-181, 3.0L, and 6-250 engines. It describes the cylinder head and valve mechanism repair process. This involves removing and disassembling the cylinder head, cleaning and inspecting components, lapping valves and seats if needed, and reassembling the cylinder head. Precautions are outlined to prevent damage to parts during the repair process.
Volvo ec700 c ld ec700cld excavator service repair manualfjjsekksekmm
The document contains information about the power transmission system and track gearbox of an excavator. It describes how mechanical power from the engine is converted to hydraulic power which powers the travel motors, slew motor, and hydraulic cylinders. It also provides descriptions, illustrations and removal/installation instructions for the track gearbox, along with maintenance standards, troubleshooting tips, and precautions for operation.
Energy saving, retrofit and optimizing introduction作家 谢
- Chongqing General Industry Group is a large state-owned enterprise that produces industrial fans and other machinery. It has decades of experience designing fans for the steel and cement industries.
- Currently, many fans in China operate at low efficiency due to design mismatches with actual operating conditions and oversizing of fans. CQGI has expertise in analyzing fan and piping systems and optimizing fans through techniques like CFD analysis to improve efficiency.
- Examples are provided of CQGI improving fan efficiency by 18% in a sintering plant fan and 75% in a cement mill fan through rotor replacements informed by their technical analysis, saving hundreds of thousands of dollars annually in energy costs.
This report provides an overview of the cement products market in China, including key statistics and trends. It discusses the size of the Chinese cement market and identifies hot areas. It also analyzes the industry structure and market share, identifying the top 10 companies. The report examines import/export data and provides standards information. It aims to present a comprehensive picture of the current state and development of China's cement products industry.
Understand the fundamentals of external rotor motor design and use. We explain the advantages over traditional motors and explore applications and product lines that utilise external rotor motors. Contact Axair Fans on 01782 349 430 for more information.
Marathon Electric manufactures large induction motors from 125 to 5,000 horsepower that are suitable for demanding industrial applications. Their motors feature robust enclosures for outdoor use and hazardous environments, along with standard features like anti-friction bearings, corrosion protection, and form wound stator coils vacuum pressure impregnated with epoxy resin. Marathon Electric can modify motors and provide accessories to meet specific application needs.
This document discusses valves and cooling valves in internal combustion engines. It describes the different types of valves based on their location, such as overhead valves and valves in the cylinder block. The parts of a valve like the stem, head, and seat are identified. Various valve materials and coatings used to protect against corrosion are outlined. The document also explains valve temperature zones and cooling methods like sodium-filled stems. Finally, it provides an overview of overhead camshafts and double overhead camshaft engines.
This document summarizes the details of two unused stainless steel evaporative condensers. Each unit is rated at 827 tons and was manufactured by Evapco with model ATW-207C. The units feature stainless steel construction, enclosed fan motors, quick connect piping, sloped access ladders, and elliptical coil designs. Additional details are provided on optional accessories and each unit's dimensions and electrical specifications.
The document discusses Pacific Wedgeplug valves, including:
1) Key features of Wedgeplug valves like simple construction, metal sealing surfaces, and bi-directional sealing capability.
2) Typical applications in refineries and petrochemical plants, including isolation valves in various units.
3) Design details like the plug, body, seats, bonnet, and Wedgetorque operator. Purging and flushing processes are described to enhance performance.
1. The document discusses industrial fans and draft systems for combustion. It describes natural draft produced by chimneys and mechanical draft produced using fans.
2. The main types of mechanical draft systems are induced draft, forced draft, and balanced draft. Induced draft uses a fan to draw exhaust gases into the chimney. Forced draft uses a fan to push air into the furnace.
3. The document provides details on fan construction, types of fans including axial and centrifugal, installation procedures, and maintenance best practices like lubrication and vibration checking.
The document describes the AT-HD Heavy Duty Actuator Series from Air Torque. The series provides higher torque actuators for heavy duty applications based on a scotch yoke design. The actuators can be customized with options like travel stops, power modules, temperature ranges, materials, coatings, and manual overrides. Air Torque tests all actuators in-house to ensure quality and reliability.
The document summarizes Flygt N-pump series self-cleaning pumps. It describes their patented self-cleaning impeller technology which allows solids to pass through the pump without reducing efficiency over time. This sustained high efficiency lowers energy costs compared to conventional pumps. The pumps have a broad capacity range from 2.2 to 870 horsepower and can handle various applications like wastewater, stormwater, and industrial processes. Key features highlighted include modular components, durable seals and bearings, compliance with industry standards, and different installation methods.
This document provides an overview of Johnson Controls YK centrifugal chillers ranging from 250 to 3000 tons. It describes key features such as matched components that maximize efficiency, open-drive design that eliminates risk of refrigerant contamination, and precision control of compressor oil pressure. It also summarizes approvals, nomenclature, contents, dimensions, weights, specifications, and metric conversions.
This document discusses the need for flexible turbine design to meet changing power demands. It outlines several key design features of modern steam turbines that improve flexibility and efficiency. These include axially split casings to reduce stresses during transients, shrink ring casings for leak-free operation under varying conditions, welded rotors for improved material selection and stress reduction, internal casing cooling to reduce component thickness and stresses, blade cooling to reduce thermal stresses, and single bearing designs with sliding casings to integrate expansion and reduce vibration. These features allow for higher ramp rates, shorter startups, more frequent cycling, and extended equipment life under flexible plant operation.
Large AC motors are defined as having a power rating greater than specified NEMA limits, a stator winding constructed by hand, or operating at voltages over 2300V. They use large enclosures to protect internal components from environmental conditions. Key components include stators constructed from laminated steel and copper windings, and rotors made from cast aluminum or copper bars. Large bearings and accessories like space heaters are also required due to the motor size. Proper enclosure selection and component sizing are important to ensure reliable operation of large AC motors in various applications.
GWC produces a wide variety of Cast Steel Pressure
Seal Gate, Globe and Check valves. Other available
pressure seal designs include Tilting Disc, Piston
Type and Stop Check valves.
The document provides instructions for repairing and maintaining Walinga Chrome Blowers models 510 and 614. It discusses lubrication requirements, describes how to retime the blowers by adjusting impeller clearances, and provides step-by-step instructions for disassembling and reassembling the blowers. Key maintenance tasks include checking oil levels regularly, draining and refilling the gear case every 100 hours, and retiming the blowers if knocking occurs to reset the impeller clearances.
CABERO produces industrial evaporators made of stainless steel tubes. Their product lines include models for ammonia applications. Key features include improved air throw through their CABERO ESS technology, powder coated casings for improved hygiene, and removable inspection sheets. CABERO focuses on quality, environmental awareness, durability, and ease of handling and maintenance through thoughtful design.
1 8 ratio gearbox,1 to 1 ration gearbox,1:10 ratio planetary gearboxLance Shi NER GROUP
NER GROUP LIMITED is a professional manufacturer and exporter of gear reducers, geared motors and electric motors for several years from China.
We believe that we can cooperate with you on this business and please contact us if you are interested.
You are welcomed to visit our catalogue website for more information:
www.sogears.com
Mobile:+86-18563806647
www.guomaodrive.com
https://twitter.com/gearboxmotor
Viber/Line/Whatsapp/Wechat: 008618563806647
E-mail: info@sogears.com; Skype ID: qingdao411
No.5 Wanshoushan Road, Yantai, Shandong,China
Geared motors manufacturer, Industrial gearboxes supplier, visit
www.bonwaygroup.com Email: info@sogears.com WhatsApp: +86-1856
www.sogears.com
Mobile:+86-18563806647
www.guomaodrive.com
https://twitter.com/gearboxmotor
Viber/Line/Whatsapp/Wechat: 008618563806647
E-mail: info@sogears.com; Skype ID: qingdao411
No.5 Wanshoushan Road, Yantai, Shandong,China
Geared motors manufacturer, Industrial gearboxes supplier, visit
www.bonwaygroup.com Email: info@sogears.com WhatsApp: +86-18563806647
China gear motor hydraulic motor of high pressure and high speed with very go...Lance Shi NER GROUP
AC Induction Gear Motor with Gearhead And Speed Reducer,Factory supply High Torque Low Speed 12V 24V DC Worm Gear Motor for safe lock,low noise high speed high torque 12v 25mm DC micro gear motor
NER GROUP LIMITED is a professional manufacturer and exporter of gear reducers, geared motors and electric motors for several years from China.
We believe that we can cooperate with you on this business and please contact us if you are interested.
You are welcomed to visit our catalogue website for more information:
www.sogears.com
Mobile:+86-18563806647
www.guomaodrive.com
https://twitter.com/gearboxmotor
Viber/Line/Whatsapp/Wechat: 008618563806647
E-mail: info@sogears.com; Skype ID: qingdao411
No.5 Wanshoushan Road, Yantai, Shandong,China
Geared motors manufacturer, Industrial gearboxes supplier, visit www.bonwaygroup.com Email: info@sogears.com WhatsApp: +86-18563806647
Energy saving, retrofit and optimizing introduction作家 谢
- Chongqing General Industry Group is a large state-owned enterprise that produces industrial fans and other machinery. It has decades of experience designing fans for the steel and cement industries.
- Currently, many fans in China operate at low efficiency due to design mismatches with actual operating conditions and oversizing of fans. CQGI has expertise in analyzing fan and piping systems and optimizing fans through techniques like CFD analysis to improve efficiency.
- Examples are provided of CQGI improving fan efficiency by 18% in a sintering plant fan and 75% in a cement mill fan through rotor replacements informed by their technical analysis, saving hundreds of thousands of dollars annually in energy costs.
This report provides an overview of the cement products market in China, including key statistics and trends. It discusses the size of the Chinese cement market and identifies hot areas. It also analyzes the industry structure and market share, identifying the top 10 companies. The report examines import/export data and provides standards information. It aims to present a comprehensive picture of the current state and development of China's cement products industry.
Understand the fundamentals of external rotor motor design and use. We explain the advantages over traditional motors and explore applications and product lines that utilise external rotor motors. Contact Axair Fans on 01782 349 430 for more information.
Marathon Electric manufactures large induction motors from 125 to 5,000 horsepower that are suitable for demanding industrial applications. Their motors feature robust enclosures for outdoor use and hazardous environments, along with standard features like anti-friction bearings, corrosion protection, and form wound stator coils vacuum pressure impregnated with epoxy resin. Marathon Electric can modify motors and provide accessories to meet specific application needs.
This document discusses valves and cooling valves in internal combustion engines. It describes the different types of valves based on their location, such as overhead valves and valves in the cylinder block. The parts of a valve like the stem, head, and seat are identified. Various valve materials and coatings used to protect against corrosion are outlined. The document also explains valve temperature zones and cooling methods like sodium-filled stems. Finally, it provides an overview of overhead camshafts and double overhead camshaft engines.
This document summarizes the details of two unused stainless steel evaporative condensers. Each unit is rated at 827 tons and was manufactured by Evapco with model ATW-207C. The units feature stainless steel construction, enclosed fan motors, quick connect piping, sloped access ladders, and elliptical coil designs. Additional details are provided on optional accessories and each unit's dimensions and electrical specifications.
The document discusses Pacific Wedgeplug valves, including:
1) Key features of Wedgeplug valves like simple construction, metal sealing surfaces, and bi-directional sealing capability.
2) Typical applications in refineries and petrochemical plants, including isolation valves in various units.
3) Design details like the plug, body, seats, bonnet, and Wedgetorque operator. Purging and flushing processes are described to enhance performance.
1. The document discusses industrial fans and draft systems for combustion. It describes natural draft produced by chimneys and mechanical draft produced using fans.
2. The main types of mechanical draft systems are induced draft, forced draft, and balanced draft. Induced draft uses a fan to draw exhaust gases into the chimney. Forced draft uses a fan to push air into the furnace.
3. The document provides details on fan construction, types of fans including axial and centrifugal, installation procedures, and maintenance best practices like lubrication and vibration checking.
The document describes the AT-HD Heavy Duty Actuator Series from Air Torque. The series provides higher torque actuators for heavy duty applications based on a scotch yoke design. The actuators can be customized with options like travel stops, power modules, temperature ranges, materials, coatings, and manual overrides. Air Torque tests all actuators in-house to ensure quality and reliability.
The document summarizes Flygt N-pump series self-cleaning pumps. It describes their patented self-cleaning impeller technology which allows solids to pass through the pump without reducing efficiency over time. This sustained high efficiency lowers energy costs compared to conventional pumps. The pumps have a broad capacity range from 2.2 to 870 horsepower and can handle various applications like wastewater, stormwater, and industrial processes. Key features highlighted include modular components, durable seals and bearings, compliance with industry standards, and different installation methods.
This document provides an overview of Johnson Controls YK centrifugal chillers ranging from 250 to 3000 tons. It describes key features such as matched components that maximize efficiency, open-drive design that eliminates risk of refrigerant contamination, and precision control of compressor oil pressure. It also summarizes approvals, nomenclature, contents, dimensions, weights, specifications, and metric conversions.
This document discusses the need for flexible turbine design to meet changing power demands. It outlines several key design features of modern steam turbines that improve flexibility and efficiency. These include axially split casings to reduce stresses during transients, shrink ring casings for leak-free operation under varying conditions, welded rotors for improved material selection and stress reduction, internal casing cooling to reduce component thickness and stresses, blade cooling to reduce thermal stresses, and single bearing designs with sliding casings to integrate expansion and reduce vibration. These features allow for higher ramp rates, shorter startups, more frequent cycling, and extended equipment life under flexible plant operation.
Large AC motors are defined as having a power rating greater than specified NEMA limits, a stator winding constructed by hand, or operating at voltages over 2300V. They use large enclosures to protect internal components from environmental conditions. Key components include stators constructed from laminated steel and copper windings, and rotors made from cast aluminum or copper bars. Large bearings and accessories like space heaters are also required due to the motor size. Proper enclosure selection and component sizing are important to ensure reliable operation of large AC motors in various applications.
GWC produces a wide variety of Cast Steel Pressure
Seal Gate, Globe and Check valves. Other available
pressure seal designs include Tilting Disc, Piston
Type and Stop Check valves.
The document provides instructions for repairing and maintaining Walinga Chrome Blowers models 510 and 614. It discusses lubrication requirements, describes how to retime the blowers by adjusting impeller clearances, and provides step-by-step instructions for disassembling and reassembling the blowers. Key maintenance tasks include checking oil levels regularly, draining and refilling the gear case every 100 hours, and retiming the blowers if knocking occurs to reset the impeller clearances.
CABERO produces industrial evaporators made of stainless steel tubes. Their product lines include models for ammonia applications. Key features include improved air throw through their CABERO ESS technology, powder coated casings for improved hygiene, and removable inspection sheets. CABERO focuses on quality, environmental awareness, durability, and ease of handling and maintenance through thoughtful design.
1 8 ratio gearbox,1 to 1 ration gearbox,1:10 ratio planetary gearboxLance Shi NER GROUP
NER GROUP LIMITED is a professional manufacturer and exporter of gear reducers, geared motors and electric motors for several years from China.
We believe that we can cooperate with you on this business and please contact us if you are interested.
You are welcomed to visit our catalogue website for more information:
www.sogears.com
Mobile:+86-18563806647
www.guomaodrive.com
https://twitter.com/gearboxmotor
Viber/Line/Whatsapp/Wechat: 008618563806647
E-mail: info@sogears.com; Skype ID: qingdao411
No.5 Wanshoushan Road, Yantai, Shandong,China
Geared motors manufacturer, Industrial gearboxes supplier, visit
www.bonwaygroup.com Email: info@sogears.com WhatsApp: +86-1856
www.sogears.com
Mobile:+86-18563806647
www.guomaodrive.com
https://twitter.com/gearboxmotor
Viber/Line/Whatsapp/Wechat: 008618563806647
E-mail: info@sogears.com; Skype ID: qingdao411
No.5 Wanshoushan Road, Yantai, Shandong,China
Geared motors manufacturer, Industrial gearboxes supplier, visit
www.bonwaygroup.com Email: info@sogears.com WhatsApp: +86-18563806647
China gear motor hydraulic motor of high pressure and high speed with very go...Lance Shi NER GROUP
AC Induction Gear Motor with Gearhead And Speed Reducer,Factory supply High Torque Low Speed 12V 24V DC Worm Gear Motor for safe lock,low noise high speed high torque 12v 25mm DC micro gear motor
NER GROUP LIMITED is a professional manufacturer and exporter of gear reducers, geared motors and electric motors for several years from China.
We believe that we can cooperate with you on this business and please contact us if you are interested.
You are welcomed to visit our catalogue website for more information:
www.sogears.com
Mobile:+86-18563806647
www.guomaodrive.com
https://twitter.com/gearboxmotor
Viber/Line/Whatsapp/Wechat: 008618563806647
E-mail: info@sogears.com; Skype ID: qingdao411
No.5 Wanshoushan Road, Yantai, Shandong,China
Geared motors manufacturer, Industrial gearboxes supplier, visit www.bonwaygroup.com Email: info@sogears.com WhatsApp: +86-18563806647
Airmac provides premium blower packages through innovative design and superior construction. They offer a range of blower, motor, and package options to suit various applications. Airmac was founded on principles of quality and innovation, and has 20 years of experience supplying blower packages internationally.
H Series Bevel Helical Gearboxes and Helical Gearboxes:
Types
H1 Single Reduction
H2/H2SF Double Reduction,
H3/H3SF Triple Reduction,
H4/H4SF ,
B2/B2SF,
B3/B3SF,
B4/B4SF
• Unit Sizes: 80, 90, 100, 112, 125, 140, 160, 180, 200, 225, 250, 280, 315, 355, 400, 450, 500, 560, 630
• Transmission ratio: 1.2 - 637
• Input Power: 0.61 KW to 5,000 kW
• Torque: Up to 117,000 Nm
AGNEE H series helical parallel shaft and bevel helical right angle drive industrial gearboxes have been introduced to meet the requirements of today's demanding applications in the medium and heavy-duty sector of the power transmission market.
The modular design and construction of the Series H offers many engineering and performance benefits including a high degree of interchangeability of parts and sub assemblies. This in turn provides considerable economies of production while maintaining the highest standard of component integrity.
Apart from standard range, Gear Boxes are also tailor made to suit individual requirement or as per specifications provided. Please feel free to discuss your requirement and we shall be pleased to make suitable suggestions.
Product Specification:
Gear tooth geometry design combines maximum efficiency with high load carrying capacity and minimal noise generation. Serviceability of the product was key in the design of the Series H range allowing easy maintenance for long life and reliability, which are synonymous with our field reputation.
The Bevel Helical Gearbox Housing is usually made of Close Grain Cast Iron. Sometimes Housing is also offered in Structural Steel when the application demands. They are rugged, corrosion resistant and absorb shock and vibration. The Helical Pinion is made of EN 353 Case Hardening Steel, Helical Gears are made of SAE 8620 Case Hardening Steel. The teeth are generated on Gear Hobbing Machine. They are then Case carburized, Hardened and Tempered. Finally, they are surface ground to close tolerances. The teeth Flanks are ground on Teeth Profile Grinder. This leads to very good efficiency and a quiet working condition. The Output shafts are from alloy steel forging or bars. Low speed shafts can be solid or hollow type. Bearings are fitted on a accurately bored journal and taper roller Bearings are used.
Features & Benefits of Bevel Helical Gearboxes :
AGNEE Series H Bevel Helical Gearbox takes advantage of our many years of accumulated design expertise together with the use of high quality materials and components, and has the following features & benefits:
• Profile ground helical gears.
• High level of surface finish for quiet running.
• All Gears and Pinions case carburised, Hardened and Tempered
• Teeth Profile Ground
• Units can be offered in horizontal or vertical mounting positions
• All units are also available with hollow bore for output shaft mounting.
• Output bores can be connected by shrink disc.
1. Rosenberg has been developing and producing fans and air handling units for railway technology applications since 1981. Their fans are used for HVAC, cabinet cooling, equipment cooling, and other applications.
2. Their fans are customized for the demanding conditions of railway technology, including high shock stress, vibrations, and varying weather conditions. Their fans offer flexible solutions for optimal airflow, various operating voltages, maximum efficiencies at variable speeds, and minimum maintenance.
3. Rosenberg provides a wide range of fans suited for railway applications, including backward curved centrifugal fans, axial fans, and their ECOFIT line of compact fans. Their fans meet various industry standards for use in railway technology.
The document discusses Flygt hydro turbines produced by Xylem. It provides an overview of Flygt's history in developing submersible pumps and turbines since 1947. Flygt offers a range of submersible hydro turbines that are reliable, efficient, and easy to install. Their turbines can be used across a variety of site conditions and applications. The document provides specifications for Flygt's turbine models and details their design features. It also discusses Xylem's aftermarket support services to optimize turbine performance.
Similar to CQGI catalogue - High Temperature Fans (20)
2. 1
W6-29、W 6-2×29、W 6-39、W 6-2×39
F 式传动系列高温风机
High Temperature Fan with F Driving
W6-29、W6-2×29、W6-39、W6-2×39 系列 F 式传动工业高温风机系采用引进英国豪登-西洛
哥公司高温风机专有技术,结合我公司几十年生产高温风机的经验,并且应用引进美国北方工程
研究公司(NREC)流体机械气动设计技术软件,进行改进设计和制造新一代高温风机产品,该型
风机具有效率高、噪声低、结构合理、性能稳定、运行平稳可靠、自动化控制程度高、经久耐用、
流量调节范围大、高效区宽广、性能曲线平坦的特点,可在温度较高、含尘浓度较大、磨损较严
重的条件下使用。适用于冶金、电力、水泥等行业。
W6-29、W6-2×29、W6-39、W6-2×39 系列 F 式传动工业高温风机输送的介质为高温气体 ,
最高温度不得超过 450℃。在高温风机前,必须加装除尘装置,以保证进入风机的高温气体中含
尘量尽量减少,根据一般用户使用情况,除尘效率不得低于 85%。
1. Application
W6-29、W6-2×29、W6-39、W6-2×39 series of industrial high temperature fans (F driving) are the new generation fans
combined design and manufacture know-how of high temperature fan from Howden-Sircoco(UK) and fluid machinery
areodynamic design software from NREC with manufacturing experience in high temperature fan with more than 50
years. Fans feature high efficiency, low noise, compact, smooth and reliable operation, automatation, durable, wide range
of volume, smooth performance curve and it can meet the needs of high temperature, high dust concentration, severe wear.
The fan are widely used in metallurgy, electric power, cement applications etc.
W6-29、W6-2×29、W6-39、W6-2×39 series of industrial high temperature fans (F driving) are mainly used for handling
high temperature gas (max.temperature 450℃). Dust-removing device should be mounted inlet of fan so as to minimize
the dust in high temperature gas, the efficiency of this device should be not less than 85% in general.
2. Model of fan
1、本系列风机可分为单吸双支撑和双吸双支撑两种结构。单吸双支撑和双吸双支撑各有 8 个标准
机号:№18F、20F、21.5F(22F)、24F、26F、28F、30F、31.5F;如用户要求,我们也可设计非
标机号.
2.1 This fan is available either single-suction and double-support or double-suction and double-support, standard model
includes №18F、20F、21.5F(22F)、24F、26F、28F、30F、31.5F each. We also can customize for clients.
一、风机的用途
二、风机的型式
3. 2
2、风机可制成顺旋和逆旋两种型式:从电机一端正视,叶轮如按顺时针方向旋转,称顺旋风机,
以“顺”表示;叶轮如按逆时针方向旋转,称逆旋风机,以“逆”表示。
2.2 Rotation direction of fan has clockwise or counter-clockwise. It is indicated as clockwise fan if impeller runs in
clockwise direction viewed from the motor end. On the contrarily, it is indicated as counter-clockwise fan.
3、风机的出口位置以机壳的出口角度表示,分“顺” 旋和 “逆” 旋。单吸双支撑和双吸双支撑
可制成以下 4 种基本角度:进 135°/出 45°、进 90°/出 45°、进 135°/出 90°、进 135°/出 0°。
如用户要求,我们也可设计非标角度。
2.3 Outlet angle of fan casing stands for the outlet angle of fan. The angles of fan are available at 135°(inlet)/45°(outlet),
90°(inlet) /45°(outlet),135°(inlet)/90°(outlet), 135°(inlet)/ 0°(outlet) for each. We also can customize for clients.
4、产品全称举例如下: W6-29№20F 高温风机 顺进 90°/出 45°
W6-2×39№31.5F 高温风机 逆进 135°/出 0°
2.4 Full name of fan gives the example:
W6-29№20F high temperature fan 90°(inlet)/45°(outlet) in clockwise
W6-2×39№31.5F high temperature fan 135°(inlet)/ 0°(outlet) in counter-clockwise
机组除风机本体外,根据用户需要,还可配备各种外配套,主要有差动导叶调节装置、电机、
液力偶合器(或液液体电阻调速器)、慢转装置、风机进、出口金属膨胀节、稀油站、电动执行器、
电控柜等。
3. Main structure
Fan is made up of fan-body and its accessories including differential guide vane gear, motor, hydraulic coupling (or
liquid resistance speed controller), barring gear, inlet/outlet expansion joints, oil station, electric actuator, electric control
cabinet etc.
(一)、风机本体结构简介 Fan-body structure
风机本体主要由叶轮、机壳、进气箱、进风圈、主轴、轴承和轴承箱、轴端密封、散热轮等
组成。
Fan-body mainly includes impeller, fan casing, suction chamber, inlet ring, main shaft, bearing and bearing box,
shaft-end seal, cooling wheel etc.
三、主要组成部分
4. 3
1、叶轮 impeller:
由后向叶片焊接于锥形前盘与板形的后(中)盘中间。由于采用了后向叶片,保证了风机高
效率、低噪声、高强度。考虑到风机叶轮的尘粒磨损问题,对叶片头部进行了加厚处理,另外在
风机的易磨损部位,采取了加防磨护板的办法,有效的延长了叶轮的使用寿命。整个叶轮用高强
度合金钢制作,材料本身及叶轮各焊缝均经过严格的无损探伤, 并且叶轮经过动平衡校正。为安
全运行提供了可靠保证。
Back-curved blades of impeller are welded between cone front disc and back (middle) disc. Back-curved blades can
ensure high efficiency, low noise and high strength. The thickness of blades tip improves to avoid damage of fan impeller
due to the dust or particles. At the same time, easily-worn locations also are used the wear abrasion plates to extend the
life of the impeller. Impeller is made of the alloy steel with high stiffness. The raw material of impeller and impeller
welding seams should be done the non-detective tests and impeller also should be done the dynamic balance test so as to
ensure the reliable operation.
2、机壳和进气箱:Fan casing and inlet chamber
机壳是采用高强度结构钢焊接而成的蜗形体。在机壳进口处,增加了适于该型风机的进气
箱,减小了风机的机壳以及风道的振动,在机壳和进气箱的外部焊有适当高度的“井”字加强筋
组,,提高了机壳的刚性。在机壳和进气箱上设有能快速开启且密封性能良好的检修门、清灰门,
便于作常规检查和清除叶轮和机壳粉尘堆积。另外,为了使大修时转子便于吊出,机壳设计成剖
分结构机壳和进气箱组采用共用侧板及剖分结构的方式,便于安装、维修和运输。一旦需要,可
以从剖分处把上半部份壳体移开,将转子组很方便的吊出。且尽可能的考虑了剖分的合理性,减
少用户拆卸联接管道。
Fan casing made of steel structure is welded into volute. Inlet chamber is equipped with fan at inlet to reduce the vibration
of fan casing and air ducts. Reinforced ribs shaped "well" are welded outside the fan casing and inlet chamber to
enhance fan casing rigidness. An inspection door and access(dust-removing door) are on the fan casing and inlet chamber
to carry out the routine check and remove the contamination on the impeller and fan casing. In addition, in order to lift out
of the rotor from upper half of fan casing for big maintenance, and to reduce the clients dismantling ducts, fan casing is
designed to split structure and common side plates with fan inlet chamber.
3、进风圈 Inlet ring:
收敛式流线的进风圈制成整体结构,用螺栓固定在风机入口侧。
integral convergent flowing-line structure. It is fastened with bolts inlet of fan .
4、主轴:Main shaft
风机主轴由优质耐高温的合金结构钢锻件制造,主轴是按在设计温度下,工作转速远小于
临界转速的前提进行设计,保证主轴具有足够的刚度及可靠性。
5. 4
Main shaft is made of alloy structural steel forging with good quality and high temperature. It can ensure main
shaft has enough hardness and reliability according to designed temperature, working speed far lower than the critical
speed.
5、轴承和轴承箱:轴承箱结构系引进结构,采用“油浴、油环──循环油”复合润滑方式,
循环润滑油靠稀油站提供,该循环油不但起润滑轴承的作用,而且将风机沿轴向传导给轴承的热
量带走,起到冷却轴承的作用,以保证轴承的安全运转。如果遇到意外停电事故或油站短时故障,
油站不能提供润滑油时,油环自动带起轴承箱油池内的油继续润滑,而不至于轴承损坏,为轴承
的可靠运转提供了保障。
5.Bearing and bearing box
The lubrication method of bearing box is "oil bath---oil ring--oil recycling". Recycling oil is supplied by the oil station.
The purpose of recycling oil is not only to lubricate the bearing, but also to take away the heat from fan to cool the
bearing. So it can make sure the bearing safe operation. If the supply power failures or oil station malfunction, oil station
cannot supply the lubrication oil, oil ring will lift the oil in the bearing box oil box to go on lubricating the bearing , avoid
damage the bearing. Oil ring can provide reliable operation for the bearing.
6、轴端密封和散热轮:在进气箱的主轴通过处,设置有特殊的浮动轴端密封,在机壳受热
膨胀后,可自动调心,起到良好的密封作用,轴端密封采用剖分结构,便于安装拆卸。
6.shaft-end seal and cooling wheel
A special floating shaft-end seal is equipped with the main shaft passage. When thermal expansion of fan casing,
the floating shaft-end seal can align auto to seal. Shaft-end seal is split structure and it is easy to mount or dismantle.
在进气箱与轴承座之间,设置有一个散热轮,以减少来自风机的辐射热,降低对轴承的外界
热影响,为轴承的正常运转提供保障。
The cooling wheel is mounted between the inlet chamber and bearing pedestal to reduce the radiant heat from the fan and
also reduce the heat influence on the bearing. It can ensure the normal operation of the bearing.
(二)部分外配套简介 main accessories
1、差动导叶调节装置:Differential inlet vane gear----damper
差动导叶调节装置安装在风机进气箱前,用来调节风机的进口流量。此装置的叶片可以在
0~90°范围内(即全开和全闭范围内)任意转动,由于该装置的叶片不是全部同步动作,而是部
分叶片先转动一个角度,这样就可以实现风机的微量调节。用此装置进行风量调节再配合调速调
节,从而实现“阀门与调速”并存的复合调节,可以使风机的使用工况范围很宽。差动导叶调节
装置灵活可靠,没有死行程,调节叶片的支撑处装有滚动轴承,转动灵活,使用可靠,调节门配
合电动执行器操动,能方便的进行流量的调节。
Differential inlet vane gear (damper) mounted in front of the fan inlet chamber is used to control the fan inlet volume. The
guard vanes can rotate from 0 to 90°(from fully open to fully closed) randomly, because the guard vanes don't rotate fully
at the same time but a part of guard vanes rotate to certain angle first to regulate the fan volume slowly. This inlet vane
6. 5
gear and speed-controlled make the fan have a wide range of the operation. Differential inlet vane gear can regulate
flexibly, no dead stroke. The supports of guard vane are equipped with rolling bearing and it can rotate flexibly and
reliability. If the damper and electric actuator work together, it is convenient to regulate the volume.
2、慢转装置:barring gear
当风机由高温运转状态停车时,转子在热态下静止不动,会因转子自身重量及温度梯度等因
素而发生弯曲变形,将导致下次起车时机组振动。为了避免此现象发生,特设置此慢转装置,以
用于风机在主电机停车后,进行一定时间的慢转盘车,直到风机机壳内的温度降到接近常温时,
机组方可最后停止下来。
When fan stops at the high temperature operation, rotor cannot rotate in the heat condition, and even cause deformation
due to rotor itself weight and temperature change. In order to avoid this case, special barring gear is used for barring when
fan main motor shuts down. Fan cannot stop until the temperature of fan casing drops to normal temperature.
3、膨胀节:Expansion joint:
因风机输送气体温度较高,风机进、出口特设置膨胀节,用来吸收风机壳体的热膨胀量。否
则,机壳热膨胀受阻碍会引起变形,影响风机正常运转。
Because fan handling gas temperature is very high, so inlet/outlet expansion joint is equipped to absorb the thermal
expansion of fan casing, or fan casing thermal expansion is disturbed to cause deformation and affect the normal
operation.
4、液力偶合器:液力偶合器主要用来进行风机的无级调速。
Hydraulic coupling: is used for stepless speed regulation.
5、液体电阻调速器:液体电阻调速器主要作用类同液力偶合器,也是用来进行风机的无级调
速,它的调速主要是调节电机的输出转速。
Liquid resistance speed controller: is used for stepless speed regulation, mainly output speed of motor.
6、电控柜:电控柜可实现机组的显示、监控、调节、连锁、报警及远距离传送信号,操作方
便,自动化程度高。它是包括风机、电机、液力偶合器、稀油润滑站、电动执行器、慢转装置等
所有外配套的全部控制功能在内的集中控制柜。
Electric control cabinet: serve the function of display, measure, regulation, interlocking, warning, sending the signal
remote, easy to operate and automatation. All functions of fan accessories such as fan-body, motor, hydraulic coupling, oil
station, electric actuator, barring gear etc. can be controlled by this control cabinet.
4.selection and application
1、 风机的性能:fan performance
风机的性能以风机的流量、全压、主轴转速、轴功率和效率表示。
Fan performance displays fan volume, total pressure, speed of main shaft, shaft power and efficiency.
选择性能表中所给出的性能,高温风机性能按进气温度 t=350℃,大气压力 P=101325Pa,进
四、风机性能的选择与应用
7. 6
口气体密度ρ=0.613Kg/m3 的空气介质计算。选择性能表中的性能均指调节门为全开时。当风机
使用条件发生变化时可按以下公式进行换算。
Performance data given in the performance data sheet is calculated based on inlet temperature t=350℃, atmospheric
pressure P=101325Pa, inlet gas density ρ=0.613Kg/m3, handling air and damper opening(inlet vane gear) at fully open.
Please follow the following formula to calculate data if the operation conditions change.
全 压 Total pressure:H=H1×
613.0
ρ
= H1×
760
B
×
t+
+
273
350273
流 量 Volume:Q= Q1
轴功率 Shaft Power:N= N1×
613.0
ρ
= N1×
760
B
×
t+
+
273
350273
式中 of which :
H1----性能表中查出的全压(Pa) Total pressure given in the performance data sheet
Q1----性能表中查出的流量(m
3
/h)Volume given in the performance data sheet
N1----性能表中查出的轴功率(Kw)shaft power given in the performance data sheet
B ----风机使用地的大气压力(mmHg)atmospheric pressure on the site of fan operation.
T ----输送气体的温度(℃) handling gas temperature
ρ----输送气体的密度(Kg/m2
)handling gas density
H ----使用条件下风机所产生的全压(Pa)Total pressure during operation condition.
Q ----使用条件下风机所产生的流量(m
3
/h)volume during operation condition.
N ----使用条件下风机所产生的轴功率(Kw)shaft power during operation codition
所需功率按下式计算:required power is calculated according to the formula:
N=
98.03600××
×
η
HQ
×K
式中:Q 、H、η分别为风机的流量(m3/h)、全压(Pa)、空气效率
0.98 为风机的机械效率
Of which : Q 、H、η stand for fan volume (m3/h), total pressure (Pa), air efficiency respectively. 0.98 means fan
mechanical efficiency.
K 为电动机的容量储备系数,K stands for the safety factor of motor
2、 风机的选择 fan selection
如使用条件为前述给定条件下所需的全压、流量,可按性能表选用风机。如使用条件与标准
情况不符时,可按前述公式换算出的性能选用风机。风机出厂检验性能是在设计流量时,全压值
的偏差不得超过设计全压值的±5%。
If fan total pressure , volume under the operation condition is similar to above-mentioned standard condition in the
performance data sheet, select fan according to performance data sheet. If fan operation condition is not the same as the
8. 7
standard condition, select the fan according to above formula. Performance test before delivery is subject to the designed
volume, the total pressure error should not exceed ±5%。of the the designed total pressure.
3、 流量过多或不足的处理:overabundance or shortage in volume
在使用风机时,常常发生流量过多或不足的现象。产生这种现象的原因很多,如果是在使用
过程中发生这种现象,主要是由于管网中的阻力时大时小。如果是在使用过程中,经过较长的时
间逐渐减少,或在短时间内突然减少,则主要是由于管网堵塞。
During the operation of the fan, overabundance or shortage in volume can occur very often, there are a large number of
the causes. If it occurs during the operation, it is caused by the large or small resistance of ducts network. If it reduces
gradually during the operation condition, or reduces suddenly for a short time, it is caused by the ducts clogging.
在风机新安装后,进行正式运转就发生流量过大或不足的现象,其原因主要是管网阻力实际
值与计算值相差过大或选择风机时未考虑风机本身全压偏差的影响。
After new fan installation, volume is overabundance or shortage during formal operation, it is mainly caused by the big
difference between actual and calculated value of ducts network resistance or not allowing for total pressure error
influence on fan.
风机发生流量过多或不足时可采用以下方法消除:
remedy for overlarge or short of volume:
⑴.利用调节门的开闭程度调节流量。
Regulate the volume of the damper opening.
⑵.改变风机转速调节流量。(注:如超过性能表中给定的风机转速,必须针对设计、生产。)
change fan speed to regulate the volume (note: fan speed is more than given speed in the performance data sheet,
specially design and manufacture).
⑶.改变管网阻力系数调节流量。
Change ducts network resistance coefficient to regulate the volume.
当调节门全开时,流量仍过小,此时可设法改变管使网阻力系数减小,以增加流量,也可增
加风机的转速,但转速不得大于性能表中的最大转速。
When damper is open fully, but volume is still very small, try to change the ducts and make the ducts networks resistance
coefficient reduce to increase the volume and fan speed, but fan speed cannot exceed the max. speed given in the
performance data sheet.
25. 24
NOTES:
出水—WATER OUT 进水—WATER IN; 清灰门—RUST-REMOVING DOOR
全闭—FULLY CLOSED; 全开—FULLY OPEN;
B 向旋转— B VIEW ROTATION
A 向旋转— A VIEW ROTATION
清灰门通道—ACCESS DOOR PASSAGE
140×140 深—140×140 DEPTH
图 1—FIG.1
外型基础示意图—OUTER DIMENSIONS &.FOUNDATION SCHEME
26. 25
NOTES:
出水—WATER OUT 进水—WATER IN 清灰门—RUST-REMOVING DOOR
预留孔—PRE-MODED HOLE 清灰门通道—ACCESS DOOR PASSAGE
B 向旋转—B VIEW ROTATION
A 向旋转—A VIEW ROTATION
深—DEPTH
图 2— FIG.2
外型基础示意图—OUTER DIMENSIONS &.FOUNDATION SCHEME
27. 26
NOTES:
进水—WATER IN; 出水— WATER OUT; 清灰门—DUST-REMOVING DOOR
全闭—FULLY CLOSED; 全开—FULLY OPEN
A 向旋转—A VIEW ROTATION
B 向旋转—B VIEW ROTATION
电动执行器位置—LOCATION OF ELECTRIC ACTUATOR
160×160 深—160×160DEPTH
清灰门通道—ACCESS DOOR PASSAGE
图 4—FIG.4
外型基础示意图—OUTER DIMENSIONS &.FOUNDATION SCHEME
28. 27
NOTES:
进水/WATER IN; 出水/ WATER OUT; 清灰门/DUST-REMOVING DOOR
全闭/FULLY CLOSED; 全开/FULLY OPEN
A 向旋转/ A VIEW ROTATION
B 向旋转/ B VIEW ROTATION
电动执行器位置/LOCATION OF ELECTRIC ACTUATOR
160×160 深/160×160DEPTH
清灰门通道/ACCESS DOOR PASSAGE
图 4/ FIG.4
外型基础示意图/ OUTER DIMENSIONS &.FOUNDATION SCHEME
29. 28
NOTES:
慢转装置部/BARRING GEAR
风机主轴/FAN MAIN SHAFT
慢转装置部/FLOOR PLAN FOR BARRING GEAR
4—140×140 深 630/4—140×140DEPTH630
本慢转装置部中 H4 与表 1~表 4 中尺寸 H4 数值相同/H4 IS SAME AS H4 IN THE TABLE1~4
order information
用户应写明:
⑴ 风机的名称
⑵ 风机型号
⑶ 风机的旋转方向及进出口角度(右旋或左旋)
⑷ 性能参数(流量、全压、气体温度、气体密度、当地大气压、进口压力、转速、电压等)
client should specify:
(1) name of fan
(2) fan model
(3) fan rotation direction (clockwise or counter-clockwise) and inlet/outlet angle
(4) performance data (volume, total pressure, gas temperature, gas density, local atmospheric
pressure, inlet pressure, speed, voltage etc.)
订货须知