The document discusses a meeting between representatives from a testing lab in China and a customer from Pakistan to determine the appropriate salt spray chamber for corrosion testing of motorcycle baffles. The customer brought a sample baffle for testing and needed a chamber large enough to fit the baffle vertically as installed. The lab recommended their model HD-E808-120 chamber which could test 4 baffle samples at once and met the size and standard requirements. They conducted a trial test to confirm the suitability of the recommended chamber model.

1. Corrosion Test for Coating of Motorcycle Baffle
Thinkwhatyoumay concern.
We'll alwaysbe here to be your labconsultantwith preferabletestsolution.
It is a pretty nice experience to meet customer from Pakistan on 15/Aug. to discuss the
corrosion testformotorcycle baffle by Haida'sSaltSprayTestChamber.
Due to tight flight, we drove to Guangzhou and had a very short meeting with Mr. Asim and
hisfatherbefore the flighttime.
Mr. Asim brought a baffle sample from Pakistan (size: 762*127*356mm), the sample needs
to be place vertically inside Salt Spray Chamber as it’s installed in 45°direction on
motorcycle.

2. So, it requests us to recommend a Salt Spray Chamber with the most suitable dimension,
whichis large enough toput the sample butwithfavorableprice.
Salt Spray Chamber requires drops of solution which accumulate on the ceiling or cover of
the chamber shall not be permitted to fall on the specimens being exposed. So the chamber
adopts a slop ceiling to avoid the drips as per standard ASTM B117, which makes the
chamberwithdegressive heightfromthe mostcentre tobothsides.
Base on the placement method of sample and machine structure, we proposed Haida model
HD-E808-120 to customer with internal dimension 1200W*1000D*500Hmm. It can test 4pcs
motorcycle baffle with size 762*127*356mm at the same time, which saves testing time
also.
For guarantee the recommended model is perfectly meet the test, we took back one pc
baffle tofactoryfortrail test, andshowedMr.Asimthe operationvideo forconfirmation.

3. Thanksfor Mr. Asim,we hada verynice meeting andcooperation.
Do youknowwhycoatingparts needtodo corrosiontest?
Welcome toleave yourcommenthere.