The document is a service manual that provides instructions for servicing a transmission. It begins with general information about the transmission components and operation. It then provides a step-by-step process to disassemble the transmission, with pictures showing how to remove each part in the proper order. The disassembly instructions list over 30 individual parts and components to remove from the transmission.
Clark cmp20 30 dlg forklift service repair manual #2fjkskefksmeme
The document provides information on servicing a transaxle. It consists of construction details, maintenance procedures, fluid level checks, filter changes, refilling procedures, pressure specifications, and service brake adjustment instructions. Key points include checking the fluid level when warm, draining and replacing the fluid every 1000 hours, replacing the filter every 500 hours, refilling and priming the system, and adjusting the service brakes to a clearance of 0.255-0.304 mm.
Clark cmp40 50s dl forklift service repair manualfjskksmem
The document is a service manual that provides instructions for disassembling and assembling components of a drive axle, including the axle housing assembly and hub. It describes removing parts like the magnetic plug, brake piston, square rings, and lock plate. Precautions are given, such as supporting heavy parts with slings and cranes, applying grease to parts, and using Loctite on fasteners. The manual is intended as a guide for qualified service technicians to safely perform repairs and maintenance.
Clark cmc15 20 sl forklift service repair manualfjskksmem
This 3-sentence summary provides the high-level and essential information from the document:
This service manual provides specifications and repair instructions for various models of forklifts manufactured by Samsung, including the SF12-20SD/L/G and SF15-20SLC models. The manual is divided into chapters covering each main system, and sections within chapters cover specific groups to make content easy to understand. Safety precautions are outlined at the beginning to ensure repairs are performed safely.
Clark cmp20 30 dlg forklift service repair manual #2fdhjsekdme
The document is a service manual that provides instructions for maintaining a transaxle, including checking fluid levels, changing fluids and filters, adjusting brake clearance, and checking hydraulic pressures. Maintenance includes draining fluid from the bottom of the transmission case and filling through the dipstick tube with the engine running. Brake adjustment is performed by rotating an adjuster ratchet wheel and releasing a ratchet pawl to set the clearance between shoes and drums.
Clark cmp20 30 dlg forklift service repair manual #2jdfjskekmdme
The document is a service manual that provides instructions for maintaining and repairing a 2000-3000kg forklift. It begins with safety precautions and an overview of how the manual is organized. The manual then describes the structure and maintenance of the forklift's transaxle, including its torque converter, single-speed transmission, integral differential and drive axle, drum brakes, and gears.
Clark sf20 30 dlg forklift service repair manual #2fhhjsjekmdme
The document is a service manual that provides instructions for maintaining a transaxle, including checking fluid levels, changing fluids and filters, adjusting brake clearance, and checking hydraulic pressures. Maintenance includes draining fluid from the bottom of the transmission case and filling through the dipstick tube with the engine running. Brake adjustment is accessed through openings in the backing plate or wheel hub/drum.
Clark cmp20 30 dlg forklift service repair manual #2fjkskefksmeme
The document provides information on servicing a transaxle. It consists of construction details, maintenance procedures, fluid level checks, filter changes, refilling procedures, pressure specifications, and service brake adjustment instructions. Key points include checking the fluid level when warm, draining and replacing the fluid every 1000 hours, replacing the filter every 500 hours, refilling and priming the system, and adjusting the service brakes to a clearance of 0.255-0.304 mm.
Clark cmp40 50s dl forklift service repair manualfjskksmem
The document is a service manual that provides instructions for disassembling and assembling components of a drive axle, including the axle housing assembly and hub. It describes removing parts like the magnetic plug, brake piston, square rings, and lock plate. Precautions are given, such as supporting heavy parts with slings and cranes, applying grease to parts, and using Loctite on fasteners. The manual is intended as a guide for qualified service technicians to safely perform repairs and maintenance.
Clark cmc15 20 sl forklift service repair manualfjskksmem
This 3-sentence summary provides the high-level and essential information from the document:
This service manual provides specifications and repair instructions for various models of forklifts manufactured by Samsung, including the SF12-20SD/L/G and SF15-20SLC models. The manual is divided into chapters covering each main system, and sections within chapters cover specific groups to make content easy to understand. Safety precautions are outlined at the beginning to ensure repairs are performed safely.
Clark cmp20 30 dlg forklift service repair manual #2fdhjsekdme
The document is a service manual that provides instructions for maintaining a transaxle, including checking fluid levels, changing fluids and filters, adjusting brake clearance, and checking hydraulic pressures. Maintenance includes draining fluid from the bottom of the transmission case and filling through the dipstick tube with the engine running. Brake adjustment is performed by rotating an adjuster ratchet wheel and releasing a ratchet pawl to set the clearance between shoes and drums.
Clark cmp20 30 dlg forklift service repair manual #2jdfjskekmdme
The document is a service manual that provides instructions for maintaining and repairing a 2000-3000kg forklift. It begins with safety precautions and an overview of how the manual is organized. The manual then describes the structure and maintenance of the forklift's transaxle, including its torque converter, single-speed transmission, integral differential and drive axle, drum brakes, and gears.
Clark sf20 30 dlg forklift service repair manual #2fhhjsjekmdme
The document is a service manual that provides instructions for maintaining a transaxle, including checking fluid levels, changing fluids and filters, adjusting brake clearance, and checking hydraulic pressures. Maintenance includes draining fluid from the bottom of the transmission case and filling through the dipstick tube with the engine running. Brake adjustment is accessed through openings in the backing plate or wheel hub/drum.
Fiat kobelco sl30 b skid steer loader service repair manualfhsejkdkme
This document is a service manual for an SKID STEER LOADER. It contains safety precautions and instructions for servicing the loader. The safety section emphasizes operating the loader safely and preventing accidents by following basic safety rules. It lists 29 specific safety rules for operating and servicing the loader, such as wearing protective equipment, keeping bystanders away, and not allowing passengers. The document also includes an index of sections covering general information, engines, fuel systems, electrical components, power trains, hydraulics, mounted equipment, and schematics.
Fiat kobelco ex95 w mini wheel excavator service repair manualfhsejkdkme
This document provides safety precautions for operating an excavator. It outlines general safety rules such as reading the operator's manual, understanding safety signs, wearing proper protective equipment, keeping the operator compartment clear, and following rules for starting, operating, stopping and maintaining the machine. It emphasizes the importance of authorized and careful operation to prevent accidents.
Fiat kobelco e80 mini crawler excavator service repair manualfhsejkdkme
This document provides safety precautions and general guidelines for disassembling and repairing machines:
- Proper preparation is key, including cleaning the machine, recording inspection details, and arranging the work area. Safety gear should be worn and the machine secured before starting.
- Hydraulic systems require special care when disassembling. Relieve pressures, drain fluids, clean parts thoroughly, and replace seals before reassembly. Match marks and special tools ensure correct part placement.
- General precautions include using lifting equipment for heavy parts, blocking raised components, and never forcing removal of stuck parts. Removed fasteners must be replaced with identical parts. Thorough cleaning and inspection detects issues before reassembly.
Fiat kobelco e50.2 sr mini crawler excavator service repair manualfhsejkdkme
This document provides specifications and component information for an excavator model. It includes sections on machine dimensions, specifications and performance, machine and component weights, transportation requirements, crawler shoe and bucket types, and engine specifications including a performance curve. The document lists key components such as the engine, hydraulic pump, slewing motor, and travel motor. It also provides diagrams of machine dimensions and a table of weights for transportation planning.
Fiat kobelco e45.2 sr mini crawler excavator service repair manualfhsejkdkme
This document provides safety precautions and general guidelines for repairing construction machinery. It discusses preparing for disassembly, safety during disassembly and assembly, handling hydraulic and electrical equipment, welding repairs, and environmental measures. Specific safety topics covered include cleaning machines before work, using proper protective equipment, relieving pressures in systems, and properly supporting lifted or raised components. Guidelines are provided for disassembling and assembling hydraulic systems and components.
Fiat kobelco e40.2 sr mini crawler excavator service repair manualfhsejkdkme
This document provides specifications and component information for an excavator model. It includes sections on machine dimensions, specifications and performance, machine and component weights, transportation requirements, crawler shoe and bucket types, and engine specifications including a performance curve. The document lists key components such as the engine, hydraulic pump, slewing motor, and travel motor. It also provides diagrams of machine dimensions and a table of weights.
Fiat kobelco e35.2 sr mini crawler excavator service repair manualfhsejkdkme
This document provides specifications and component information for an excavator model E30.2SR - E35.2SR. It includes:
1. A list of major components with corresponding numbers for identification.
2. Dimensions and performance specifications for the excavator, including machine weight, transport information, and bucket/shoe types.
3. Engine specifications, including performance curves for the model.
4. Sections on hydraulic, electrical and cooling systems, maintenance standards, and troubleshooting guides for components.
The document appears to be a workshop manual intended to support maintenance and repairs for the excavator models E30.2SR - E35.2SR. It provides detailed technical specifications, component
Fiat kobelco e30.2 sr mini crawler excavator service repair manualfhsejkdkme
This document provides specifications and component information for an excavator model E30.2SR - E35.2SR. It includes:
1. A list of major components with corresponding numbers.
2. Dimensions, specifications, performance data, and weights for the excavator and its components.
3. Information on the type of tracks and buckets available.
4. Engine specifications including performance curves.
5. Sections on transportation requirements and international unit conversion standards.
The document serves as a reference for technicians, providing essential technical data to support maintenance and repairs for the excavator. Specifications cover the excavator's components, size, capabilities, engine details, and transportation guidelines.
Fiat kobelco e25 sr mini crawler excavator service repair manualfhsejkdkme
This document provides safety guidelines and procedures for repairing heavy machinery:
- Technicians should thoroughly read manuals, clean machines, identify necessary parts, and document inspections before disassembling.
- Proper protective equipment like gloves, shoes, and glasses should be worn. Warning signs should be posted and engines stopped before work.
- Hydraulic and electrical systems need to be depressurized and disconnected from power sources. Guards and shields must be reinstalled after repairs.
- Welding, if required, should only be done by trained personnel. Fuel and hydraulic lines must be carefully inspected for damage.
- Procedures describe escaping from enclosed cabs and towing machines if necessary. Conversions between
Fiat kobelco e22 sr mini crawler excavator service repair manualfhsejkdkme
This document provides safety precautions and instructions for working on and operating machinery. It states that most accidents are preventable by being aware of safety risks and addressing them proactively. Key safety rules include never cleaning, oiling or adjusting a machine while it is in motion, and ensuring equipment is lowered to the ground before servicing, adjusting or repairing it. Proper use of safety equipment and understanding operating procedures are emphasized.
Fiat kobelco e20 sr mini crawler excavator service repair manualfhsejkdkme
This document provides safety guidelines and procedures for repairing heavy machinery:
- Technicians should thoroughly prepare and clean the machine before disassembly to prevent damage and ensure safety. All necessary parts and tools should be obtained in advance.
- Proper protective equipment like gloves, shoes, helmet and glasses must be worn during disassembly and assembly work. Warning signs should be posted and the engine stopped to avoid accidents.
- Hydraulic and electrical systems require special precautions when servicing to avoid burns or electrical shocks. Fuel, oil and hydraulic lines should be carefully inspected for leaks or damage.
- Welding and other repairs should only be done by trained personnel, and proper ventilation is needed when working with hazardous
Clark tmx12 25 forklift service repair manualfhsejkdkme
This document is a service manual that provides instructions for safely maintaining Clark forklifts. It discusses identifying information for specific forklift models covered by the manual and how the manual is organized. The document also provides extensive safety guidelines and warnings for maintenance personnel, covering topics like ensuring adequate ventilation, blocking wheels before starting work, disconnecting batteries, and only performing approved modifications. Personnel are instructed to carefully read and understand all safety procedures before working on forklifts.
Clark sf50 75s dl forklift service repair manualfhsejkdkme
The document is a service manual that provides instructions for servicing a transmission. It begins with general information about the transmission components and operation. It then provides a section-by-section process to disassemble the transmission down to its core components in over 20 steps, including removing gears, shafts, bearings, seals, and other parts. Precautions are given to clean parts thoroughly during repair.
Clark sf35 45 dl forklift service repair manualfhsejkdkme
The document is a service manual that provides instructions for disassembling and assembling components of a drive axle. It describes how to drain fluids, remove parts like hub assemblies and axle shafts, and disassemble the axle housing and hub. Safety precautions are provided, such as using lifting equipment with adequate capacity and supporting heavy components. Detailed steps are given for tasks like removing brake pistons and installing new seals.
Clark sf15 20 slc forklift service repair manualfhsejkdkme
This 3-page service manual provides information on servicing a forklift rated between 1200-2000kg. It begins with general safety precautions for working on machinery, handling fluids, electrical systems, and other repairs. Precautions include using proper protective equipment, draining fluids safely, and avoiding rotating parts. The document also explains how to read the manual and symbols used.
Fiat kobelco sl30 b skid steer loader service repair manualfhsejkdkme
This document is a service manual for an SKID STEER LOADER. It contains safety precautions and instructions for servicing the loader. The safety section emphasizes operating the loader safely and preventing accidents by following basic safety rules. It lists 29 specific safety rules for operating and servicing the loader, such as wearing protective equipment, keeping bystanders away, and not allowing passengers. The document also includes an index of sections covering general information, engines, fuel systems, electrical components, power trains, hydraulics, mounted equipment, and schematics.
Fiat kobelco ex95 w mini wheel excavator service repair manualfhsejkdkme
This document provides safety precautions for operating an excavator. It outlines general safety rules such as reading the operator's manual, understanding safety signs, wearing proper protective equipment, keeping the operator compartment clear, and following rules for starting, operating, stopping and maintaining the machine. It emphasizes the importance of authorized and careful operation to prevent accidents.
Fiat kobelco e80 mini crawler excavator service repair manualfhsejkdkme
This document provides safety precautions and general guidelines for disassembling and repairing machines:
- Proper preparation is key, including cleaning the machine, recording inspection details, and arranging the work area. Safety gear should be worn and the machine secured before starting.
- Hydraulic systems require special care when disassembling. Relieve pressures, drain fluids, clean parts thoroughly, and replace seals before reassembly. Match marks and special tools ensure correct part placement.
- General precautions include using lifting equipment for heavy parts, blocking raised components, and never forcing removal of stuck parts. Removed fasteners must be replaced with identical parts. Thorough cleaning and inspection detects issues before reassembly.
Fiat kobelco e50.2 sr mini crawler excavator service repair manualfhsejkdkme
This document provides specifications and component information for an excavator model. It includes sections on machine dimensions, specifications and performance, machine and component weights, transportation requirements, crawler shoe and bucket types, and engine specifications including a performance curve. The document lists key components such as the engine, hydraulic pump, slewing motor, and travel motor. It also provides diagrams of machine dimensions and a table of weights for transportation planning.
Fiat kobelco e45.2 sr mini crawler excavator service repair manualfhsejkdkme
This document provides safety precautions and general guidelines for repairing construction machinery. It discusses preparing for disassembly, safety during disassembly and assembly, handling hydraulic and electrical equipment, welding repairs, and environmental measures. Specific safety topics covered include cleaning machines before work, using proper protective equipment, relieving pressures in systems, and properly supporting lifted or raised components. Guidelines are provided for disassembling and assembling hydraulic systems and components.
Fiat kobelco e40.2 sr mini crawler excavator service repair manualfhsejkdkme
This document provides specifications and component information for an excavator model. It includes sections on machine dimensions, specifications and performance, machine and component weights, transportation requirements, crawler shoe and bucket types, and engine specifications including a performance curve. The document lists key components such as the engine, hydraulic pump, slewing motor, and travel motor. It also provides diagrams of machine dimensions and a table of weights.
Fiat kobelco e35.2 sr mini crawler excavator service repair manualfhsejkdkme
This document provides specifications and component information for an excavator model E30.2SR - E35.2SR. It includes:
1. A list of major components with corresponding numbers for identification.
2. Dimensions and performance specifications for the excavator, including machine weight, transport information, and bucket/shoe types.
3. Engine specifications, including performance curves for the model.
4. Sections on hydraulic, electrical and cooling systems, maintenance standards, and troubleshooting guides for components.
The document appears to be a workshop manual intended to support maintenance and repairs for the excavator models E30.2SR - E35.2SR. It provides detailed technical specifications, component
Fiat kobelco e30.2 sr mini crawler excavator service repair manualfhsejkdkme
This document provides specifications and component information for an excavator model E30.2SR - E35.2SR. It includes:
1. A list of major components with corresponding numbers.
2. Dimensions, specifications, performance data, and weights for the excavator and its components.
3. Information on the type of tracks and buckets available.
4. Engine specifications including performance curves.
5. Sections on transportation requirements and international unit conversion standards.
The document serves as a reference for technicians, providing essential technical data to support maintenance and repairs for the excavator. Specifications cover the excavator's components, size, capabilities, engine details, and transportation guidelines.
Fiat kobelco e25 sr mini crawler excavator service repair manualfhsejkdkme
This document provides safety guidelines and procedures for repairing heavy machinery:
- Technicians should thoroughly read manuals, clean machines, identify necessary parts, and document inspections before disassembling.
- Proper protective equipment like gloves, shoes, and glasses should be worn. Warning signs should be posted and engines stopped before work.
- Hydraulic and electrical systems need to be depressurized and disconnected from power sources. Guards and shields must be reinstalled after repairs.
- Welding, if required, should only be done by trained personnel. Fuel and hydraulic lines must be carefully inspected for damage.
- Procedures describe escaping from enclosed cabs and towing machines if necessary. Conversions between
Fiat kobelco e22 sr mini crawler excavator service repair manualfhsejkdkme
This document provides safety precautions and instructions for working on and operating machinery. It states that most accidents are preventable by being aware of safety risks and addressing them proactively. Key safety rules include never cleaning, oiling or adjusting a machine while it is in motion, and ensuring equipment is lowered to the ground before servicing, adjusting or repairing it. Proper use of safety equipment and understanding operating procedures are emphasized.
Fiat kobelco e20 sr mini crawler excavator service repair manualfhsejkdkme
This document provides safety guidelines and procedures for repairing heavy machinery:
- Technicians should thoroughly prepare and clean the machine before disassembly to prevent damage and ensure safety. All necessary parts and tools should be obtained in advance.
- Proper protective equipment like gloves, shoes, helmet and glasses must be worn during disassembly and assembly work. Warning signs should be posted and the engine stopped to avoid accidents.
- Hydraulic and electrical systems require special precautions when servicing to avoid burns or electrical shocks. Fuel, oil and hydraulic lines should be carefully inspected for leaks or damage.
- Welding and other repairs should only be done by trained personnel, and proper ventilation is needed when working with hazardous
Clark tmx12 25 forklift service repair manualfhsejkdkme
This document is a service manual that provides instructions for safely maintaining Clark forklifts. It discusses identifying information for specific forklift models covered by the manual and how the manual is organized. The document also provides extensive safety guidelines and warnings for maintenance personnel, covering topics like ensuring adequate ventilation, blocking wheels before starting work, disconnecting batteries, and only performing approved modifications. Personnel are instructed to carefully read and understand all safety procedures before working on forklifts.
Clark sf50 75s dl forklift service repair manualfhsejkdkme
The document is a service manual that provides instructions for servicing a transmission. It begins with general information about the transmission components and operation. It then provides a section-by-section process to disassemble the transmission down to its core components in over 20 steps, including removing gears, shafts, bearings, seals, and other parts. Precautions are given to clean parts thoroughly during repair.
Clark sf35 45 dl forklift service repair manualfhsejkdkme
The document is a service manual that provides instructions for disassembling and assembling components of a drive axle. It describes how to drain fluids, remove parts like hub assemblies and axle shafts, and disassemble the axle housing and hub. Safety precautions are provided, such as using lifting equipment with adequate capacity and supporting heavy components. Detailed steps are given for tasks like removing brake pistons and installing new seals.
Clark sf15 20 slc forklift service repair manualfhsejkdkme
This 3-page service manual provides information on servicing a forklift rated between 1200-2000kg. It begins with general safety precautions for working on machinery, handling fluids, electrical systems, and other repairs. Precautions include using proper protective equipment, draining fluids safely, and avoiding rotating parts. The document also explains how to read the manual and symbols used.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Automotive Engine Valve Manufacturing Plant Project Report.pptxSmith Anderson
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
Unlimited Short Call Girls Navi Mumbai ✅ 9930245274 FULL CASH PAYMENT
Clark cmp50 75s dl forklift service repair manual
1. SERVICE MANUAL
RATED CAPACITY : 5000~7500kg
SF50-75SD/L
CMP50-75sD/L
#40–1, Ungnam-Dong,
Changwon-City,Kyungnam,
Korea
Part No. 8034927
Manual No. SM690
Manufactured by
Jun,2004
Rev.2
2. 1
FOREWORD
G E N E R A L
00
02
FOREWORD
This shop manual has been prepared as an aid to improve quality of repairs by giving the
serviceman an accurate understanding of the product and by illustrating the correct way to
perform repairs and make judgements. Make sure you understand the contents of this manual
and use it to the full effect at every opportunity.
This shop manual mainly contains the technical information necessary for operations performed
in a service workshop.
For ease of understanding, the manual is divided into sections for each main system of the
machine, and the sections are further divided into groups.
HOW TO READ THIS MANUAL
CHAPTER AND SECTION
This manual is issued as a guide to carrying out repair and maintenance. To easily understand
this manual it is divided as follows :
Example) 10 – 01
Section number (01 : Structure and function)
Chapter number (10 : Engine)
• Improper operation and maintenance of this machine could result in serious injury or death.
• Read the Operation and Maintenance Manual carefully BEFORE operating the machine.
• Always keep the Operation and Maintenance Manual and Parts catalogue near the work
area.
• Obey precautions concerning flammable liquids, hazardous fluids, oils, lubricants and
cleaning solvents.
• To prevent injury to workers, this symbol is used to mark safety precautions in this
manual. The precautions accompanying this symbol should always be followed carefully.
• The specifications contained in this shop manual are subject to change at any time and
without any advance notice. Contact your SAMSUNG distributor for the latest information.
SAFETY
3. 2
FOREWORD
G E N E R A L
00
02
PAGE
Page numbering is started from each section. Therefore, revised pages can be easily inserted.
Also, additional pages and revision number can be indicated.
Ex) 15 – 1
3rd revision
Additional page from page 15
15th page of the section
For the revision status in this manual, refer to REVISION HISTORY.
SYMBOLS
The following symbols as defined below are used in this manual to convey the intent of the
instructions concerning safety and repair.
Symbol Item Remarks
Safety
Caution
Tightening
torque
Tool
Adhesive
Lubricating
Special safety precautions are necessary when
performing the work.
Special technical precautions or other precautions for
preserving standards are necessary when performing
the work.
Places that require special attention for the tightening
torque during assembly.
Places that require proper tools used in assembling
and disassembling.
Places to be applied with adhesive.
Places where oil or lubricant must be added.
4. 1
SAFETY
G E N E R A L
00
03
GENERAL PRECAUTIONS
SAFETY PRECAUTIONS
• When carrying out any operation or maintenance, have trained and experienced personnel carry
out the work.
• When carrying out any operation or maintenance, carefully read the Operation and Maintenance
Manual.
Read all the precautions given on the decals which are fixed to the machine.
SAFETY DEVICE
• Make sure that all guards and covers are mounted in their proper position. Repair or replace
if damaged.
• Pay attention to the method of using any safety locking device or safety belt.
SAFETY CLOTHES AND HELMET
• Wear the specified work clothes in the correct manner.
• Use the specified protective gear (helmet, safety glasses, safety shoes, mask, gloves).
Guard against injury from flying pieces of metal
or debris, wear goggles, gloves and helmet.
Always have a trained and experienced welder
carry out any welding work.
When carrying out welding work, always wear
welding gloves, apron, glasses, cap and other
clothes suitable for welding work.
5. 2
SAFETY
G E N E R A L
00
03
PREPARE FOR EMERGENCIES
• Know where fire extinguishers are located and
how to use them.
• Keep a first aid kit and an eye wash kit near
the work area.
• Keep emergency numbers for doctors, ambul-
ance service, hospital, and fire department near
your telephone.
HANDLE FLUIDS SAFELY–AVOID FIRES
• Handle fuel with care it is highly flammable.
• Do not refuel the machine while smoking or
when near open flame or sparks.
Always stop the engine before refueling
machine. Fill the fuel tank outdoors.
• Store flammable fluids away from fire hazards.
Do not incinerate or puncture pressurized
containers.
DISPOSE OF FLUIDS PROPERLY
• Improperly disposing of fluids can harm the
environment and ecology. Before draining any
fluids, find out the proper way to dispose of
waste from your local environmental agency.
• Catch draining fuel, oil, or other fluids in
suitable containers. Do not use food or
beverage containers that may mislead someone
into drinking from them. Wipe up spills at once.
• Do not pour oil into the ground, down a drain,
or into a stream, pond, or lake. Observe
relevant environmental protection regulations
when disposing of oil, fuel, coolant, brake fluid,
filters, batteries, and other harmful waste.
EX028
EX043
6. 3
SAFETY
G E N E R A L
00
03
AVOID HARMFUL ASBESTOS DUST
• Avoid breathing dust that may be generated
when handling components containing asbestos
fibers. Inhaled asbestos fibers may cause lung
cancer.
EX025
7. 4
SAFETY
G E N E R A L
00
03
PREPARATIONS FOR WORK
WARN OTHERS OF SERVICE WORK
• Unexpected machine movement can cause
serious injury.
• Before performing any work on the machine,
attach a “Do Not Operate” tag to the steering
wheel or the right control lever.
• When carrying out any operation with two or
more workers, always agree on the operating
procedure before starting.
USE TOOLS PROPERLY
• Use a tool only for its designed application.
• Keep all tools in good condition and know the
correct way to use them.
• Decide on a place in the repair workshop to
keep tools and removed parts.
• Always keep the work area clean and make
sure that there is no dirt or oil on the floor.
• Before adding oil or making any repairs, park
the machine on hard, level ground and put
blocks under the wheels to prevent the
mahcine from moving.
• Before starting work, lower the forks or any
other work equipment to the ground.
• Turn the engine OFF, remove the start key,
and apply the parking brake.
• Illuminate your work area adequately but safely.
Use a portable safety light for working inside
or under the machine. Make sure the bulb is
enclosed by a wire cage. The hot filament of
an accidentally broken bulb can ignite spilled
fuel or oil.
EX033
FX1008
EX042
8. 5
SAFETY
G E N E R A L
00
03
USE HANDHOLDS AND STEPS
• Do not jump onto or down from the fork lift.
• When getting on or off the fork lift, use the
step provided.
• Do not grasp an operating lever or steering
wheel when getting on or off.
• Always keep the step clean and repaired.
• Never operate with wet or oily hands and feet.
OPERATE FROM THE OPERATOR’S SEAT
• Do not operate the fork lift from any place
other than the designated operator’s position.
• Improper seating may cause serious injury.
FX019
FX020
9. 1
GENERAL
S P E C I F I C A T I O N S
01
01
LOCATION OF COMPONENTS
1. Mast
2. Lift cylinder
3. Control lever (Tilt, Lift)
4. Carriage
5. Forks
6. Overhead guard
7. Steering wheel
8. Driver’s seat
9. Engine hood
10. Counterweight
11. Steering tire
12. Tilt cylinder
13. Driving wheel
14. Frame
15. Steering axle
16. Driving axle
17. Rear hood
18. LPG tank (LPG only)
10. 1
GENERAL INFORMATION
P O W E R T R A I N
20
01
GENERAL INFORMATION
This section describes the method of detaching the transmisson from the vehicle, and the
diassembling, assembling, and overhauling of it.
CAUTION
Cleanliness is of extreme importance in the servicing, repair and overhaul of the
transmission. Before attempting any repairs thoroughly clean the exterior housing to
prevent the possibility of dirt entering the unit. Always conduct repairs in a clean,
dust free environment.
GENERAL
FEATURES
The torque delivered by the engine is multiplied by the torque converter and powershift
transmission to a maximum of 2.00 times, and is transmitted via the drive shaft to the axle
differential, axle shaft, final drives and driving wheels.
OPERATION PRINCIPLE AND FUNCTION
Engine →
→ → → →
→ →
Differential Axle shaft Final drive Driving wheel
Torque converter Transmission Drive shaft
11. 2
GENERAL INFORMATION
P O W E R T R A I N
20
01
• The torque converter is a type of hydraulic coupling that consists of an impeller connected to
the engine crankshaft, a turbine connected to the converter output shaft, and a stator which
redirects the oil from the turbine for recirculation into the impeller. As the load increases slippage
will occur between the impeller and turbine, so the rotational speed of the turbine will approach
O rpm (stall).
Therefore as the output shaft is decreasing in speed the torque multiplication will increase to
a maximum of 2.0 times when the output shaft is at O rpm.
• The electric shift control unit located on the steering wheel column energizes the selected
solenoid valves thus directing pressurized oil to the directional and range (gear) clutches. The
range and directional clutches direct the power flow through the gear train to provide the desired
speed range and direction. The reduction ratio for the range clutches are : 5.02–1st, 2.56–2nd,
and 1.00–3rd.
• The differential gear assembly consists of the pinion/bevel ring gear set and the differential
gear set. Power delivered from the transmission is reduced by the pinion/ring gear set and
then transmitted to the left/right axle shafts by the differential gear set.
• The final reduction of the power transmitted to the axle shafts occurs in the planetary unit of
each axle hub.
12. 1
TRANSMISSION
P O W E R T R A I N
20
02
TRANSMISSION
DISASSEMBLY
• Remove drive plate attaching capscrews and
washers. Remove drive plate and backing ring.
• Remove torque converter plug retainer ring.
• Remove plug and O–ring.
• Remove torque converter to turbine shaft
retainer ring.
13. 2
TRANSMISSION
P O W E R T R A I N
20
02
• Remove torque converter assembly.
• Remove torque converter to shaft locating ring.
• Remove filter assembly.
• Remove pressure regulator and regulator
sleeve.
Special tool can be fabricated.
14. 3
TRANSMISSION
P O W E R T R A I N
20
02
• Remove charging pump permanent pump hole
cover. (Not used when auxiliay pump is used.)
• Remove pump mounting capscrews and
washers. Remove pump and gasket.
• Remove converter housing to transmission case
capscrews and washers.
• Remove converter housing and gasket.
15. 4
TRANSMISSION
P O W E R T R A I N
20
02
• Remove impeller hub gear.
• Remove solenoid valve cartridge retainer nut
and O–ring.
• Remove solenoid coil and O–ring.
• Loosen solenoid valve cartridge.
16. 5
TRANSMISSION
P O W E R T R A I N
20
02
• Remove valve. Repeat procedures for
remaining solenoid valves.
• Remove bore plug and O–rings. This plug is
used in the middle bore position in the 3 speed
version only.
• Remove spacer plate capscrews and washers.
• Pry spacer plate away from transmission case
at dowel pin holes. Remove spacer plate and
gasket. Note aligning studs to facilitate spacer
removal.
17. 6
TRANSMISSION
P O W E R T R A I N
20
02
• Remove 1st and 2nd clutch assembly.
• Remove forward and reverse clutch assembly.
• Remove 3rd clutch assembly.
• Remove 3rd speed clutch shaft pilot bearing.
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. 7
TRANSMISSION
P O W E R T R A I N
20
02
• Remove oil baffle capscrew and washer.
• Remove oil baffle.
• Remove oil supply tube O–ring.
• Remove supply tube and screen assembly.
20. 8
TRANSMISSION
P O W E R T R A I N
20
02
• Remove 3rd clutch gear and output shaft.
• Remove 1st and 2nd clutch shaft rear roller
bearing. Remove 3rd gear roller bearing.
• Remove roller bearing locating ring.
• Remove inner case set screw plug. Remove
clutch shaft distributor sleeve set screw.
21. 9
TRANSMISSION
P O W E R T R A I N
20
02
• Use a hammer puller (or any suitable puller) as
shown to remove distributor sleeve and shaft
pilot bearing.
• Pilot bearing and distributor sleeve removed.
• Remove modulator housing sleeve and O–ring.
• Remove inner, middle, and outer valve springs
and valve stop pin.