This document provides specifications and dimensions for "NEF" diesel engines, including 3 and 4 cylinder models. It describes the engine systems such as lubrication, cooling, turbocharging, and dimensions of components. The lubrication system uses a lobe oil pump to circulate oil through the crankshaft, camshaft, cylinder head and oil cooler. The cooling system has a radiator, visco-static fan, water pump, and thermostat. Turbocharged models include an air filter and exhaust-driven turbocharger. Detailed dimensions are provided for build clearances, engine block components, cylinder head, valves, camshaft, and torque settings.
This document provides specifications and dimensions for "NEF" diesel engines, including 3 and 4 cylinder models. It describes the engine systems such as lubrication, cooling, turbocharging, and dimensions of components. The lubrication system uses a lobe oil pump to circulate oil through the crankshaft, camshaft, cylinder head and oil cooler. The cooling system has a radiator, visco-static fan, water pump, thermostat and oil cooler. Turbocharged models include an air filter and exhaust-driven turbocharger. Detailed dimensions are provided for build clearances, engine block components, cylinder head and valves. Torque specifications are also listed.
Claas nectis f 227 2+4 wd (type t16) tractor service repair manualfjsjjekdkme
This document provides specifications for Iveco "NEF" diesel engines, including 3 and 4 cylinder atmospheric and turbocharged models. It describes the engines' lubrication and cooling systems, dimensions of components like pistons and cylinders, and torque specifications. The document stresses that performance data is only valid if installation recommendations are followed.
This document provides an outline and general precautions for a shop manual. It discusses the copyright of the manual, preparation for disassembling equipment, safety procedures, hydraulic and electrical equipment handling, welding repairs, and international unit systems. The outline covers topics to be included in the manual such as specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachment installation procedures.
Kobelco sk380 xdlc 10 hydraulic excavator service repair manualfjsjjekdkme
This document is a shop manual that provides guidelines and safety precautions for maintenance and repairs of hydraulic excavators. It contains sections on specifications, maintenance procedures, systems overview, disassembly/assembly instructions, troubleshooting, engines, and optional attachment installation. The manual is intended to instruct repair and service technicians on proper procedures. Copyright of the manual belongs to Kobelco Construction Machinery and permission is required for copying or distributing its contents.
Kobelco sk300 lc 10 hydraulic excavator service repair manualfjsjjekdkme
This document is a shop manual that provides specifications, maintenance, system, disassembly, troubleshooting, and engine information for a hydraulic excavator model. It contains sections on specifications, maintenance, systems, disassembly, troubleshooting, engine, and installation of options. Safety information is provided throughout, including general safety, safety precautions, and warnings.
Kobelco sk270 srlc 5 (na 2018 yu08) hydraulic excavator service repair manualfjsjjekdkme
This document is the shop manual for a hydraulic excavator. It contains outlines, precautions, and general information for repairing and maintaining the excavator. The manual is divided into chapters covering specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachments. Precautions are provided for safety, preparing for disassembly, hydraulic and electrical equipment, and welding repairs. Copyright information is also included.
Kobelco sk260 lc 10 hydraulic excavator service repair manualfjsjjekdkme
This document outlines general precautions and guidelines for repairing excavator equipment according to the shop manual. It discusses preparing for disassembly, safety practices, hydraulic system repair, electrical work, and welding. Permission is required to copy or distribute content from the copyrighted manual. Measurements use the international unit system. Technicians should thoroughly read and understand the manual before performing any repair work.
Kobelco sk250 10 hydraulic excavator service repair manualfjsjjekdkme
This document outlines general precautions and guidelines for repairing excavator equipment according to the shop manual. It discusses preparing for disassembly, safety during disassembly and assembly, handling hydraulic and electrical equipment, welding repairs, and environmental issues. The outline notes that the copyright belongs to Kobelco and outlines rules for copying or distributing the manual's contents. It also introduces the international unit system used in specifications.
This document provides specifications and dimensions for "NEF" diesel engines, including 3 and 4 cylinder models. It describes the engine systems such as lubrication, cooling, turbocharging, and dimensions of components. The lubrication system uses a lobe oil pump to circulate oil through the crankshaft, camshaft, cylinder head and oil cooler. The cooling system has a radiator, visco-static fan, water pump, thermostat and oil cooler. Turbocharged models include an air filter and exhaust-driven turbocharger. Detailed dimensions are provided for build clearances, engine block components, cylinder head and valves. Torque specifications are also listed.
Claas nectis f 227 2+4 wd (type t16) tractor service repair manualfjsjjekdkme
This document provides specifications for Iveco "NEF" diesel engines, including 3 and 4 cylinder atmospheric and turbocharged models. It describes the engines' lubrication and cooling systems, dimensions of components like pistons and cylinders, and torque specifications. The document stresses that performance data is only valid if installation recommendations are followed.
This document provides an outline and general precautions for a shop manual. It discusses the copyright of the manual, preparation for disassembling equipment, safety procedures, hydraulic and electrical equipment handling, welding repairs, and international unit systems. The outline covers topics to be included in the manual such as specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachment installation procedures.
Kobelco sk380 xdlc 10 hydraulic excavator service repair manualfjsjjekdkme
This document is a shop manual that provides guidelines and safety precautions for maintenance and repairs of hydraulic excavators. It contains sections on specifications, maintenance procedures, systems overview, disassembly/assembly instructions, troubleshooting, engines, and optional attachment installation. The manual is intended to instruct repair and service technicians on proper procedures. Copyright of the manual belongs to Kobelco Construction Machinery and permission is required for copying or distributing its contents.
Kobelco sk300 lc 10 hydraulic excavator service repair manualfjsjjekdkme
This document is a shop manual that provides specifications, maintenance, system, disassembly, troubleshooting, and engine information for a hydraulic excavator model. It contains sections on specifications, maintenance, systems, disassembly, troubleshooting, engine, and installation of options. Safety information is provided throughout, including general safety, safety precautions, and warnings.
Kobelco sk270 srlc 5 (na 2018 yu08) hydraulic excavator service repair manualfjsjjekdkme
This document is the shop manual for a hydraulic excavator. It contains outlines, precautions, and general information for repairing and maintaining the excavator. The manual is divided into chapters covering specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachments. Precautions are provided for safety, preparing for disassembly, hydraulic and electrical equipment, and welding repairs. Copyright information is also included.
Kobelco sk260 lc 10 hydraulic excavator service repair manualfjsjjekdkme
This document outlines general precautions and guidelines for repairing excavator equipment according to the shop manual. It discusses preparing for disassembly, safety practices, hydraulic system repair, electrical work, and welding. Permission is required to copy or distribute content from the copyrighted manual. Measurements use the international unit system. Technicians should thoroughly read and understand the manual before performing any repair work.
Kobelco sk250 10 hydraulic excavator service repair manualfjsjjekdkme
This document outlines general precautions and guidelines for repairing excavator equipment according to the shop manual. It discusses preparing for disassembly, safety during disassembly and assembly, handling hydraulic and electrical equipment, welding repairs, and environmental issues. The outline notes that the copyright belongs to Kobelco and outlines rules for copying or distributing the manual's contents. It also introduces the international unit system used in specifications.
Kobelco sk60 8 hydraulic excavator service repair manualfjsjjekdkme
This document appears to be a shop manual that contains information for maintenance and repair of hydraulic excavators. It includes sections on specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachment installation procedures. The document provides safety precautions for repairs and disassembly/assembly. It also includes a table for international unit conversion. The manual is intended as a technical reference for maintenance technicians to perform repairs and find fault equipment.
This shop manual provides information needed for the disassembly, reassembly, and repair of a Kawasaki 135ZV-2 wheel loader. It includes specifications, tightening torques, and service standards for the chassis, power, hydraulic, brake, and operator station systems. Safety precautions and symbols are defined. The manual instructs technicians on removing and installing major components like the engine, transmission, axles, cylinders, and more. Cautions are provided regarding parts handling and use of sealants or lock agents.
This shop manual provides information for performing maintenance and repairs on Kawasaki wheel loaders. It contains safety warnings and symbols, an outline of the loader components and maintenance schedule, recommended lubricants, and sections about inspecting and adjusting the chassis and power groups. Technical details are given for linkage pins, center pins, engine and transmission mounts, and the radiator mount. The purpose is to ensure good machine performance through following the correct maintenance and repair procedures.
Kawasaki 92 z7 wheel loader service repair manualfjsjjekdkme
This document provides specifications for the 90Z7 and 92Z7 wheel loaders. The 90Z7 is powered by a Hino E13C-VV diesel engine and has operating weights ranging from 24550-24870 kg. The 92Z7 also uses a Hino E13C-VV diesel engine and has operating weights from 26840-27090 kg. Both models have 4 speeds in forward and reverse and an articulation angle of 37 degrees left and right. Dimensional specifications like overall length, width, height and other measurements are provided for each model/bucket type.
Kawasaki 92 z7 wheel loader operation and maintenance manualfjsjjekdkme
The document provides safety instructions and component information for operating heavy machinery. It outlines proper procedures for starting and using the machine, transporting loads, and performing maintenance safely. Operators must follow guidelines to prevent injuries or accidents from improper or unsafe operation. The manual describes the various controls, switches, and components in the operator cab.
Kawasaki 90 z7 wheel loader service repair manualfjsjjekdkme
This document provides specifications for the 90Z7 and 92Z7 wheel loaders. The 90Z7 is powered by a Hino E13C-VV diesel engine and has operating weights ranging from 24550-24870 kg. The 92Z7 also uses a Hino E13C-VV diesel engine and has operating weights from 26840-27090 kg. Both models have 4 speeds in forward and reverse and an articulation angle of 37 degrees left and right. Dimensional specifications like overall length, width, height and other measurements are provided for each model/bucket type.
Kawasaki 90 z7 wheel loader operation and maintenance manualfjsjjekdkme
The document provides safety instructions and component descriptions for a machine. It outlines various hazards to avoid when operating or servicing the machine, such as ensuring safety before leaving the operator's seat, wearing protective clothing, and avoiding contact with moving parts. It also describes the machine's components, including the operator's station, consoles, switches, and monitoring systems. Maintenance procedures should follow safety practices like supporting the machine properly and avoiding high-pressure fluids.
Kawasaki 90 z6 wheel loader service repair manual (serial no. 90c7 9001 and up)fjsjjekdkme
This document provides guidelines and precautions for disassembling and reassembling a wheel loader. It discusses preparing the work area, inspecting components, draining fluids, cleaning parts, applying lubricants, and ensuring proper tightening of fasteners. Special attention should be given to sliding surfaces, seals, and markings for reassembly. Tools and loose parts should be accounted for after completion. Floating seals and nylon slings require special handling to prevent damage or improper installation.
Kawasaki 90 z6 wheel loader service repair manual (serial no. 90c7 0101 and up)fjsjjekdkme
This document provides specifications and component layout information for a 90Z6 wheel loader.
The specifications section lists operating weights, engine details, dimensions, speeds and other technical specifications for the GSC and LSC models.
The component layout sections include diagrams and lists showing the layout and weights of major components such as the chassis, powertrain, hydraulic, electrical and other systems. Component names, locations and approximate weights are provided.
Kawasaki 90 z6 wheel loader parts catalogue manual (serial no. 90c7 9001 and up)fjsjjekdkme
This document is a parts catalog for a wheel loader model 90Z6 powered by a Cummins QSM11 engine. It lists parts grouped by system including the front axle, rear axle, power train, engine systems, cab, chassis, electrical systems, hydraulic system, brake system and loader attachments. The document provides part numbers, part names, quantities and the applicable serial number range for each part listed.
Kawasaki 85 z7 wheel loader service repair manual (serial no. 85j1 5001 and up)fjsjjekdkme
This document provides specifications and layout diagrams for the components of a wheel loader. It includes:
- Specifications for dimensions, weights, engine details, speeds, and more.
- Overview diagrams showing the layout of main components such as the bucket, cylinders, lights, engine, and more.
- Detailed diagrams labeling locations of the engine, radiator, filters, tanks, valves, pumps, axles, and other parts.
- An overview of the electric system components around the cab, hydraulic oil tank, fuel tank, and engine.
- Sections providing specifications for the engine, hydraulic and electrical components.
The document contains detailed information on the specifications, component layout and electrical
Kawasaki 80 z7b wheel loader service repair manual (serial no. 80c8 5001 and up)fjsjjekdkme
The document contains sections from a shop manual for a wheel loader. It includes sections on general information, component layout, specifications, and maintenance procedures. The component layout sections describe and illustrate the main components of the wheel loader including the engine, hydraulic system, electrical system, cab, drive unit, and other key components. The specifications section lists technical specifications for the engine, operating weights, dimensions, travel speeds and other performance specifications.
Kawasaki 80 z7 wheel loader service repair manual (serial no. 80c6 5001 and up)fjsjjekdkme
This document provides guidelines and precautions for disassembling and assembling components of a wheel loader. It discusses preparing the work area, marking parts for reassembly, cleaning and inspecting components, applying lubricants, and properly tightening bolts and nuts. Proper maintenance following these guidelines helps prevent damage and ensures safe and efficient reassembly.
Kawasaki 80 z7 wheel loader service repair manual (serial no. 80c6 3001 and up)fjsjjekdkme
The document provides layout diagrams and specifications for the components of a Hitachi 80Z7 wheel loader, including the location of the engine, hydraulic pumps, electrical components, radiator assembly, cab, front and rear axles, and other major systems. Specification data is given for the loader's dimensions, bucket capacity, operating weight, tipping load, and engine details. The diagrams show the positioning of the main mechanical and electrical components.
- The document provides instructions for safely operating and maintaining a machine. It emphasizes the importance of carefully reading the manual to avoid injury or damage.
- The manual outlines various safety precautions including wearing protective equipment, inspecting the machine daily, following signals, and avoiding hazards like power lines or falling debris.
- It also describes the components and controls of the machine as well as procedures for operating, transporting, and performing routine maintenance.
Hitachi zaxis 110, 110 m excavator operator manual sn 010570 and upfjsjjekdkme
- The document is an operation manual that provides instructions for safely operating a machine. It details safety precautions, component identification, operating procedures, maintenance requirements, and transportation instructions.
- Sections include identifying components in the operator station, starting and operating the engine, driving and operating the machine, preventative maintenance schedules, and transporting the machine by road or trailer.
- The manual emphasizes following all instructions to properly maintain the machine and prevent injuries or damage from occurring.
Daewoo doosan solar 290 lc v (dieu exp) crawler excavator parts catalogue manualfjsjjekdkme
This document provides a parts list and descriptions for components of a cylinder block assembly. It includes the cylinder block, caps, plugs, rings, bolts, and other parts. Serial numbers and replacement part numbers are provided for items that may need replacing.
Daewoo doosan solar 255 lc v (di exp) crawler excavator parts catalogue manualfjsjjekdkme
The document provides a parts list and diagrams for components of a cylinder head assembly. It lists various cylinder head assembly parts numbers and descriptions, quantities, serial numbers, replacement part numbers, and other identifying information. Replacement or updated parts are identified. The parts list includes items like the cylinder head, valve seats, valve guides, plugs, and other components that make up the cylinder head assembly.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Kobelco sk60 8 hydraulic excavator service repair manualfjsjjekdkme
This document appears to be a shop manual that contains information for maintenance and repair of hydraulic excavators. It includes sections on specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachment installation procedures. The document provides safety precautions for repairs and disassembly/assembly. It also includes a table for international unit conversion. The manual is intended as a technical reference for maintenance technicians to perform repairs and find fault equipment.
This shop manual provides information needed for the disassembly, reassembly, and repair of a Kawasaki 135ZV-2 wheel loader. It includes specifications, tightening torques, and service standards for the chassis, power, hydraulic, brake, and operator station systems. Safety precautions and symbols are defined. The manual instructs technicians on removing and installing major components like the engine, transmission, axles, cylinders, and more. Cautions are provided regarding parts handling and use of sealants or lock agents.
This shop manual provides information for performing maintenance and repairs on Kawasaki wheel loaders. It contains safety warnings and symbols, an outline of the loader components and maintenance schedule, recommended lubricants, and sections about inspecting and adjusting the chassis and power groups. Technical details are given for linkage pins, center pins, engine and transmission mounts, and the radiator mount. The purpose is to ensure good machine performance through following the correct maintenance and repair procedures.
Kawasaki 92 z7 wheel loader service repair manualfjsjjekdkme
This document provides specifications for the 90Z7 and 92Z7 wheel loaders. The 90Z7 is powered by a Hino E13C-VV diesel engine and has operating weights ranging from 24550-24870 kg. The 92Z7 also uses a Hino E13C-VV diesel engine and has operating weights from 26840-27090 kg. Both models have 4 speeds in forward and reverse and an articulation angle of 37 degrees left and right. Dimensional specifications like overall length, width, height and other measurements are provided for each model/bucket type.
Kawasaki 92 z7 wheel loader operation and maintenance manualfjsjjekdkme
The document provides safety instructions and component information for operating heavy machinery. It outlines proper procedures for starting and using the machine, transporting loads, and performing maintenance safely. Operators must follow guidelines to prevent injuries or accidents from improper or unsafe operation. The manual describes the various controls, switches, and components in the operator cab.
Kawasaki 90 z7 wheel loader service repair manualfjsjjekdkme
This document provides specifications for the 90Z7 and 92Z7 wheel loaders. The 90Z7 is powered by a Hino E13C-VV diesel engine and has operating weights ranging from 24550-24870 kg. The 92Z7 also uses a Hino E13C-VV diesel engine and has operating weights from 26840-27090 kg. Both models have 4 speeds in forward and reverse and an articulation angle of 37 degrees left and right. Dimensional specifications like overall length, width, height and other measurements are provided for each model/bucket type.
Kawasaki 90 z7 wheel loader operation and maintenance manualfjsjjekdkme
The document provides safety instructions and component descriptions for a machine. It outlines various hazards to avoid when operating or servicing the machine, such as ensuring safety before leaving the operator's seat, wearing protective clothing, and avoiding contact with moving parts. It also describes the machine's components, including the operator's station, consoles, switches, and monitoring systems. Maintenance procedures should follow safety practices like supporting the machine properly and avoiding high-pressure fluids.
Kawasaki 90 z6 wheel loader service repair manual (serial no. 90c7 9001 and up)fjsjjekdkme
This document provides guidelines and precautions for disassembling and reassembling a wheel loader. It discusses preparing the work area, inspecting components, draining fluids, cleaning parts, applying lubricants, and ensuring proper tightening of fasteners. Special attention should be given to sliding surfaces, seals, and markings for reassembly. Tools and loose parts should be accounted for after completion. Floating seals and nylon slings require special handling to prevent damage or improper installation.
Kawasaki 90 z6 wheel loader service repair manual (serial no. 90c7 0101 and up)fjsjjekdkme
This document provides specifications and component layout information for a 90Z6 wheel loader.
The specifications section lists operating weights, engine details, dimensions, speeds and other technical specifications for the GSC and LSC models.
The component layout sections include diagrams and lists showing the layout and weights of major components such as the chassis, powertrain, hydraulic, electrical and other systems. Component names, locations and approximate weights are provided.
Kawasaki 90 z6 wheel loader parts catalogue manual (serial no. 90c7 9001 and up)fjsjjekdkme
This document is a parts catalog for a wheel loader model 90Z6 powered by a Cummins QSM11 engine. It lists parts grouped by system including the front axle, rear axle, power train, engine systems, cab, chassis, electrical systems, hydraulic system, brake system and loader attachments. The document provides part numbers, part names, quantities and the applicable serial number range for each part listed.
Kawasaki 85 z7 wheel loader service repair manual (serial no. 85j1 5001 and up)fjsjjekdkme
This document provides specifications and layout diagrams for the components of a wheel loader. It includes:
- Specifications for dimensions, weights, engine details, speeds, and more.
- Overview diagrams showing the layout of main components such as the bucket, cylinders, lights, engine, and more.
- Detailed diagrams labeling locations of the engine, radiator, filters, tanks, valves, pumps, axles, and other parts.
- An overview of the electric system components around the cab, hydraulic oil tank, fuel tank, and engine.
- Sections providing specifications for the engine, hydraulic and electrical components.
The document contains detailed information on the specifications, component layout and electrical
Kawasaki 80 z7b wheel loader service repair manual (serial no. 80c8 5001 and up)fjsjjekdkme
The document contains sections from a shop manual for a wheel loader. It includes sections on general information, component layout, specifications, and maintenance procedures. The component layout sections describe and illustrate the main components of the wheel loader including the engine, hydraulic system, electrical system, cab, drive unit, and other key components. The specifications section lists technical specifications for the engine, operating weights, dimensions, travel speeds and other performance specifications.
Kawasaki 80 z7 wheel loader service repair manual (serial no. 80c6 5001 and up)fjsjjekdkme
This document provides guidelines and precautions for disassembling and assembling components of a wheel loader. It discusses preparing the work area, marking parts for reassembly, cleaning and inspecting components, applying lubricants, and properly tightening bolts and nuts. Proper maintenance following these guidelines helps prevent damage and ensures safe and efficient reassembly.
Kawasaki 80 z7 wheel loader service repair manual (serial no. 80c6 3001 and up)fjsjjekdkme
The document provides layout diagrams and specifications for the components of a Hitachi 80Z7 wheel loader, including the location of the engine, hydraulic pumps, electrical components, radiator assembly, cab, front and rear axles, and other major systems. Specification data is given for the loader's dimensions, bucket capacity, operating weight, tipping load, and engine details. The diagrams show the positioning of the main mechanical and electrical components.
- The document provides instructions for safely operating and maintaining a machine. It emphasizes the importance of carefully reading the manual to avoid injury or damage.
- The manual outlines various safety precautions including wearing protective equipment, inspecting the machine daily, following signals, and avoiding hazards like power lines or falling debris.
- It also describes the components and controls of the machine as well as procedures for operating, transporting, and performing routine maintenance.
Hitachi zaxis 110, 110 m excavator operator manual sn 010570 and upfjsjjekdkme
- The document is an operation manual that provides instructions for safely operating a machine. It details safety precautions, component identification, operating procedures, maintenance requirements, and transportation instructions.
- Sections include identifying components in the operator station, starting and operating the engine, driving and operating the machine, preventative maintenance schedules, and transporting the machine by road or trailer.
- The manual emphasizes following all instructions to properly maintain the machine and prevent injuries or damage from occurring.
Daewoo doosan solar 290 lc v (dieu exp) crawler excavator parts catalogue manualfjsjjekdkme
This document provides a parts list and descriptions for components of a cylinder block assembly. It includes the cylinder block, caps, plugs, rings, bolts, and other parts. Serial numbers and replacement part numbers are provided for items that may need replacing.
Daewoo doosan solar 255 lc v (di exp) crawler excavator parts catalogue manualfjsjjekdkme
The document provides a parts list and diagrams for components of a cylinder head assembly. It lists various cylinder head assembly parts numbers and descriptions, quantities, serial numbers, replacement part numbers, and other identifying information. Replacement or updated parts are identified. The parts list includes items like the cylinder head, valve seats, valve guides, plugs, and other components that make up the cylinder head assembly.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
1. A3.2 Nectis 207 – 12.2005 – GB
General specification
103vfm00 Fig. 1
"NEF" engines are 3 or 4 cylinder diesel units with
2 valves per cylinder, and may be atmospheric or
turbo-charged. They are equipped with mechanical rotary
injection pumps.
N.B.: The data, characteristics and outputs are only
valid if the installer observes the relevant Iveco
installation recommendations. Any equipment fitted
by the installer must also always respect the torque
and power outputs and rpm figures for which the
engine was designed.
2. A3.8 Nectis 207 – 12.2005 – GB
Lubrication
Operation
The pressurised lubrication system uses a lobe oil pump
located at the front of the block, driven by the splined ring
attached to the crankshaft cone. Oil is pumped from the
crankcase to the crankshaft, the camshaft and the
cylinder head (oil cooler, turbocharger).
Oil system layout (3-cylinder engine)
221vfm00 Fig. 3
Nomenclature
177 Turbocharger oil return line.
178 Oil filter.
179 Oil cooler element.
180 Oil cooler.
181 Oil pump.
Oil pressure feed.
Oil gravity return route.
177
178
179
180
181
4. A3.10 Nectis 207 – 12.2005 – GB
Cooling
Operation
The pressurised closed circuit engine cooling system has
the following components:
• Expansion tank.
• Radiator, to dissipate the heat extracted from the
engine by the coolant fluid.
• Visco-static cooling fan to increase the radiator's heat
dissipation capability, that also forms part of the engine's
specific build.
– An oil cooler to cool the lubricant oil
– A centrifugal-type water pump located at the front of the
engine block.
– A thermostat that controls the circulation of the coolant
fluid.
Cooling (3-cylinder engine)
251vfm05 Fig. 5
Nomenclature
A Radiator inlet.
B Radiator outlet.
Coolant leaving the thermostat.
Coolant recirculating within the engine.
Coolant entering the water pump.
A
B
5. Nectis 207 – 12.2005 – GB A3.11
Cooling
Cooling system (4-cylinder engine)
251vfm06 Fig. 6
Nomenclature
A Radiator inlet.
B Radiator outlet.
Coolant leaving the thermostat.
Coolant recirculating within the engine.
Coolant entering the water pump.
A
B
6. A3.12 Nectis 207 – 12.2005 – GB
Turbocharger
Operation
Turbo-charged version of the engine
167vfm00 Fig. 7
The air intake system consists of an air filter and an
exhaust-driven compressor (turbocharger).
Air from the compressor outlet is fed directly to the inlet
manifold.
Nomenclature
4 Exhaust.
209 Air filter.
210 Turbocharger. A 3 cylinder version.
B 4 cylinder version.
210
4
210
209
209
A
B
4
8. A3.14 Nectis 207 – 12.2005 – GB
DIMENSIONS
Type Atmospheric Turbo-charged
Engine block and crank assembly (mm)
Piston ring gap in cylinder
liner:
X1
X2
X3
0,25 – 0,55
0,30 – 0,55
0,30 – 0,55
0,30 – 0,40
0,60 – 0,80
0,30 – 0,55
Connecting rod
Bush housing in small end (ø
1)
40,987 – 41,013
Big-end bearing shell housing
(ø 2)
72,987 – 73,013
Small end bush dimensions
External (ø 4)
Internal (ø 3)
40,987 – 41,013
38,019 – 38,033
Replacement big-end bearing
shells supplied (S)
1,955 – 1,968
Gudgeon pin clearance - bush 0,019 – 0,039
Big-end bearing shells
(repair size)
0,250 – 0,500
Crankshaft
Main journals (ø 1) 82,990 – 83,010
Big-end journals (ø 2) 68,987 – 69,013
X1
X2
X3
ø 1
ø 2
S
ø 4
ø 3
ø 1 ø 2
9. Nectis 207 – 12.2005 – GB A3.15
DIMENSIONS
Type Atmospheric Turbo-charged
Engine block and crank assembly (mm)
Crankshaft main bearing
shells (S1)
2,456 – 2,464
Big-end bearing shells (S2) 1,955 – 1,968
Engine block
Main bearing
N° 1 - 4 (ø 3)
N° 2 - 3 (ø 3)
87,982 – 88,008
87,977 – 88,013
Set of bearing shells - main
bearing
N° 1 - 4
N° 2 - 3
0,064 – 0,095
0,059 – 0,100
Set of big-end bearing shells 0,033 – 0,041
Main bearing shells (repair
size)
Big-end bearing shells (repair
size)
+ 0,250 ; + 0,500
Main bearing with thrust
shoulder (X1)
37,475 – 37,550
Main bearing with thrust
shoulder (X2)
31,730 – 32,280
Thrust bearing shells (X3) 37,28 – 37,38
Crankshaft thrust bearing end
float
0,095 – 0,270
S1 S2
ø 3
X1
X2
X3
10. A3.16 Nectis 207 – 12.2005 – GB
DIMENSIONS
Type Atmospheric Turbo-charged
Cylinder head - valvegear (mm)
Valve
Valve guide housings in
cylinder head
See detail under "valves"
Valves: See detail under "valves"
Clearance between valve
stem and valve guide
0,039 – 0,079
Valve head recess below
cylinder head face
Intake (X)
0,336 – 1,072
Exhaust (X)
0,104 – 0,840
X
11. Nectis 207 – 12.2005 – GB A3.17
DIMENSIONS
Type Atmospheric Turbo-charged
Cylinder head - valvegear (mm)
Valve spring height
Spring unloaded: H 63,50
Spring under a load of:
32,9 daN (H1) 49,02
64,1 daN (H2) 38,20
Injector
Injector protrusion (X) Not adjustable
Camshaft
Camshaft bearing housings:
– Rear bearing diameter C
(3-cylinder engine).
– Rear bearing diameter C
and front bearing diameter A
(4-cylinder engine).
59,222 – 59,248
Camshaft bearing housings:
– 2 intermediate bearings
diameter B and front bearing
diameter A
(3-cylinder engine).
– 3 intermediate bearings
diameter B
(4-cylinder engine).
54,089 – 54,139
Camshaft bearings:
ø 53,995 – 54,045
Bearing internal diameter (ø) 54,083 – 54,147
H H1
H2
X
ø A ø B ø C
ø
ø
12. A3.18 Nectis 207 – 12.2005 – GB
DIMENSIONS
Type Atmospheric Turbo-charged
Cylinder head - valvegear (mm)
Clearance between bearings
and camshaft
0,038 – 0,152
Clearance between bearings
and engine block
0,044 – 0,144
Effective valve lift:
Exhaust (H) 11,02
Intake (H) 10,74
Cam followers
Cam follower housing in
block (ø 1)
16,000 – 16,030
Cam follower external
diameter:
Ø2 15,929 – 15,959
Ø3 15,965 – 15,980
Clearance between cam
follower and housing
0,020 – 0,065
Rockers
Rocker shaft (ø 1) 18,963 – 18,975
Rockers (ø 2) 19,000 – 19,026
Clearance between rockers
and rocker shaft
0,025 – 0,063
Adjusting the valve rockers
Inlet valves x (mm) 0,25 ± 0,05
Exhaust valves x (mm) 0,50 ± 0,05
H
ø 1
ø 2
14 32 50
ø 2
ø 3
ø 1
ø 2
X
15. Nectis 207 – 12.2005 – GB A3.21
Torque settings
Front chassis / engine link
A. 39 daN.m (4 M20 nuts).
Engine/transmission link
B. 8 daN.m + Frenetanch (242)
(4 screws HM12x125-65).
C. Locating pin.
D. 8 daN.m + Frenetanch (242)
(8 screws HM12x175-50).
103vfm02 Fig. 12
103vfm03 Fig. 13
AA
B
C
D D
B
C
D D
17. Nectis 207 – 12.2005 – GB A3.23
Torque settings
See Figure 14.
Ref Attachment – Phase
3 cylinders 4 cylinders
Torque in daN.m
1 M8 x 1,25 x 10 1,5 ± 0,3
2
M8 x 1,25 x 50
2,4 ± 0,4
M8 x 1,25 x 35
3
M10 x 1,50 x 40/50 5 ± 0,5
M10 x 1,50 x 70/100 7 ± 0,5
4 (M8 x 1,25 x 20) x 2
2,4 ± 0,4
5 M8 x 1,25
6
M12 x 1,75 x 70 (2 phases) 5 ± 0,5 + 90°
M12 x 1,75 x 140 (3 phases) 4 ± 0,5 + 90° + 90°
M12 x 1,75 x 180 (3 phases) 7 ± 0,5 + 90° + 90°
7 M8 x 1,25
2,4 ± 0,4
8 M8 x 1,25 x 25
9 M8 x 1,25 x 100
10 M8 x 1,25 x 40
11 (M8 x 1,25 x 50) x 4
12 (M10 x 1,50 x 35) x 4
4,5 ± 0,5
13 (M10 x 1,50 x 25) x 2
14
(M12 x 1,15 x 75) x 6
First phase 5 ± 0,5
Second phase 90° ± 5°
15
(M12 x 1,75 x 100) x 2
8,0 ± 1,0
(M12 x 1,75 x 78) x 14
(M16 x 1,50 x 80) x 3
20 ± 2
(M16 x 1,50 x 100) x 2
16
(M12 x 1,25 x 31) x 8
First phase 3,0 ± 0,5
Second phase 60° ± 5°
17 Nut (rocker adjuster screw) 0,5 ± 0,1
18 M10 x 4 Nut 4,3 ± 0,6
19 Hydraulic coupling (M12 x 1,5) 3,5 ± 0,5
20 M8 x 3 Nut 2,4 ± 0,4
18. A3.24 Nectis 207 – 12.2005 – GB
Torque settings
Ref Attachment – Phase
3 cylinders 4 cylinders
Torque in daN.m
21
M10 x 1,5 x 40
4,5 ± 0,5
M10 x 1,5 x 130
22 (M10 x 1,50 x 35) x 3 4,3 ± 0,5
23
M12 Screw
First phase 5 ± 0,6
Second phase 8 ± 0,62
Third phase 90° ± 5°
24 M8 Screw 2,4 ± 0,4
25 (M8 x 1,25 x 35) x 6 3,6 ± 0,4
26
M11 Screw
First phase 6 ± 0,5
Second phase 60° ± 5°
27 M8 x 1,25 x 25 2,4 ± 0,4
28 (M10 x 1,50) x 8 3,2 ± 0,3
29 (M8 x 1,25 x 65) x 3
2,4 ± 0,4
30 (M8 x 1,25 x 35) x 12
31 (M10 x 1,5 x 50) x 3 4,8 ± 0,5
32 Engine temperature sensor 2,5 ± 0,5
33 Temperature sensor 3 ± 0,2
34 Oil pressure sensor 3,5 ± 0,2
35 Drain plug 5 ± 0,5
19. Nectis 207 – 12.2005 – GB A3.25
Checks/adjustments
Compression
N.B.: before starting the test, make sure that the
battery is fully charged and that the injector area is
perfectly clean.
– Start the engine and let it idle for 10 to 15 minutes to
achieve an oil temperature of 40 °C.
– Remove the injectors.
– Fit the dummy injector n° 00 11 301 120 (230) with
compression tester n° 60 05 721 169 (231) in place of
the injector from n° 1 cylinder (fan end).
– Disconect the engine shut down solenoid valve from
the injector pump.
– Connect the compression tester leads to the terminal
on the starter solenoid (232) with the red clip (233) to the
battery or the starter.
– Turn the engine on the starter by pressing button (234)
until the needle fully stabilises.
– Move ring (235) to depressurise the unit until the
needle returns to zero.
– Advance the record sheet (236) by pressing
button (237) on the side of the unit.
– Repeat the test on the remaining cylinders.
The compression should be between 18 and 22 bar.
Engine oil pressure
Remove the oil pressure sensor and fit pressure gauge
n° 77 01 388 204 (9) to the block in its place (Fig. 16).
Before checking the pressure, warm up the engine.
Engine oil pressure should be between 0,7 and 3,5 bar.
103vfm12 Fig. 15
103vfm06 Fig. 16
230235232
233
234
231
237
236
9
20. A3.26 Nectis 207 – 12.2005 – GB
Checks/adjustments
Turbocharger pressure
See chapter "A1".
Pressure test point for the turbocharger without mixture
limiter (Fig. 17).
103vfm13 Fig. 17
Pressure test point for the turbocharger with mixture
limiter.
103vfm14 Fig. 18
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. Nectis 207 – 12.2005 – GB A3.27
Checks/adjustments
N.B.: To reduce the time taken to adjust the
tappet/valve clearance, proceed as follows: Position
cylinder n° 1 at the top of the compression stroke and
adjust the valves marked with an asterisk in the
following table.
• 3-cylinder engine
N.B.: Rotate the crankshaft 360° and adjust the valves
marked with an asterisk in the table.
Valves
Valve clearance
Condition: Engine cold.
– Turn the flywheel in the normal rotational sense until
piston n° 1 (radiator end) is at top dead centre (TDC). To
determine TDC position, see chapter A2 :
"Remove/Refit". "Injector Pump".
– Adjust clearance between rocker arms and valve
stems. The setting is:
– Inlet valves: 0,25 ± 0,05 mm.
– Exhaust valves: 0,50 ± 0,05 mm.
131vfm04 Fig. 19
13
11
12
Cylinder N° 1 2 3
Intake * * —
Exhaust * — *
Cylinder N° 1 2 3
Intake — — *
Exhaust — * —
23. A3.28 Nectis 207 – 12.2005 – GB
Checks/adjustments
• 4-cylinder engine
Note: Turn the crankshaft through 360° and adjust the
valves marked with an asterisk in the table.
Valve lift (Engine cold)
N.B.: Measuring valve lift enables any wear in the cam
to be detected.
1. Rotate the engine and position the valves as described
the the "valve clearance" paragraph.
2. Reduce valve clearance to zero.
3. Place a dial gauge on the valve spring cup or on the
valve cap and then set to "0".
4. Turn the engine until the dial gauge reaches a
maximum value showing that the valve is fully open.
Check the values against the specifications at the
beginning of this chapter.
5. Measure valve lift as explained, then reset the tappet
clearance.
6. If the specification figures are not met, remove the
camshaft and check its condition.
Cylinder N° 1 2 3 4
Intake * * — —
Exhaust * — * —
Cylinder N° 1 2 3 4
Intake — — * *
Exhaust — * — *
24. Nectis 207 – 12.2005 – GB A3.29
Checks/adjustments
Dimensional check
Checking and repairing the valves
– Remove all carbon deposits using the recommended
wire brush.
– Check that there are no signs of seizure, cracking or
burning on the valves.
131vfm06 Fig. 20
Using a micrometer gauge (14) measure the valve stem
diameter (15). Refer to the chapter "Dimensional
specifications".
131vfm07 Fig. 21
Clearance between stem and guide and
valve centering
These checks are carried out using a dial gauge (18) with
magnetic stand positioned as shown. The play should be
between 0,052 and 0,092 mm. Turn the valve (15) and
check that the play does not exceed 0,03 mm.
131vfm08 Fig. 22
15
14
18
15