The document provides step-by-step instructions for disassembling and assembling the engine of a CLAAS CERES 316 326 336 346 2+4WD tractor. It lists 27 steps for disassembling the engine and 25 steps for reassembling it, describing how to remove and install components like the cylinder head, pistons, crankshaft, timing gears and more. Special notes are provided about cleaning parts, applying lubricant and tightening to the specified torque during reassembly.
The document provides instructions for servicing components of an excavator engine, including disassembling and assembling the exhaust manifold, fuel transfer pump, governor, and other parts. The multi-step instructions describe removing and installing components like bolts, gaskets, valves, springs, and housings. Photos supplement the text instructions to aid with the servicing process.
Komatsu d31 px 21 bulldozer service repair manual sn 50501 and upudfjjsjekkdmm
This document provides removal and installation instructions for various components of a Komatsu excavator, including the fuel injection pump assembly, cylinder head assembly, and other engine parts. It lists over 40 steps for removing parts, identifies any special tools needed, and notes torque specifications and other details for reinstallation. Key components discussed include the fuel injection pump, cylinder head, turbocharger, exhaust manifold, nozzle holders, rocker arm assembly, and various hoses and wiring.
Liebherr d946 (a7 04) diesel engine service repair manualfjjskewekfsmem
This document is a repair manual for Liebherr diesel engines D934 A7-04, D936 A7-04, D944 A7-04, and D946 A7-04 starting from serial numbers 2014-03-0001 and 2014-04-0001. It provides technical documents, instructions, and specifications for maintenance, repair, and safety procedures. The manual includes diagrams of engine components, technical data, standard torque specifications, and other information to aid repair technicians.
Daewoo doosan solar 140 lc v excavator service repair manualfjjskewekfsmem
This document provides safety information for operating a Daewoo excavator. It outlines general safety essentials, locations of safety labels, lifting precautions, unauthorized modifications, hazards, and safety procedures for starting the engine, operation, maintenance, batteries, towing, shipping, and lifting with a sling. Operators and maintenance personnel are instructed to read this manual thoroughly before use to avoid accidents and injuries.
Daewoo doosan solar 035 plus excavator service repair manualfjjskewekfsmem
- Yanmar reserves the right to improve products at any time without obligation to update previously sold products. Consumers should contact distributors for recent documentation on purchased equipment.
- Illustrations in the manual are representations and may vary from actual equipment.
- The shop manual covers Solar 030 Plus and 035 excavators and provides an introduction, table of contents, and sections on safety, machine components and specifications, engines, hydraulic systems, and maintenance procedures.
Daewoo doosan solar 030 plus excavator service repair manualfjjskewekfsmem
- Yanmar reserves the right to improve products at any time without obligation to update previously sold products. Consumers should contact distributors for recent documentation on purchased equipment.
- Illustrations in the manual are representations and may vary from actual equipment.
- The shop manual covers Solar 030 Plus and 035 excavators and provides an introduction, table of contents, and sections on safety, machine components and specifications, engines, hydraulic systems, and maintenance procedures.
The document provides instructions for servicing components of an excavator engine, including disassembling and assembling the exhaust manifold, fuel transfer pump, governor, and other parts. The multi-step instructions describe removing and installing components like bolts, gaskets, valves, springs, and housings. Photos supplement the text instructions to aid with the servicing process.
Komatsu d31 px 21 bulldozer service repair manual sn 50501 and upudfjjsjekkdmm
This document provides removal and installation instructions for various components of a Komatsu excavator, including the fuel injection pump assembly, cylinder head assembly, and other engine parts. It lists over 40 steps for removing parts, identifies any special tools needed, and notes torque specifications and other details for reinstallation. Key components discussed include the fuel injection pump, cylinder head, turbocharger, exhaust manifold, nozzle holders, rocker arm assembly, and various hoses and wiring.
Liebherr d946 (a7 04) diesel engine service repair manualfjjskewekfsmem
This document is a repair manual for Liebherr diesel engines D934 A7-04, D936 A7-04, D944 A7-04, and D946 A7-04 starting from serial numbers 2014-03-0001 and 2014-04-0001. It provides technical documents, instructions, and specifications for maintenance, repair, and safety procedures. The manual includes diagrams of engine components, technical data, standard torque specifications, and other information to aid repair technicians.
Daewoo doosan solar 140 lc v excavator service repair manualfjjskewekfsmem
This document provides safety information for operating a Daewoo excavator. It outlines general safety essentials, locations of safety labels, lifting precautions, unauthorized modifications, hazards, and safety procedures for starting the engine, operation, maintenance, batteries, towing, shipping, and lifting with a sling. Operators and maintenance personnel are instructed to read this manual thoroughly before use to avoid accidents and injuries.
Daewoo doosan solar 035 plus excavator service repair manualfjjskewekfsmem
- Yanmar reserves the right to improve products at any time without obligation to update previously sold products. Consumers should contact distributors for recent documentation on purchased equipment.
- Illustrations in the manual are representations and may vary from actual equipment.
- The shop manual covers Solar 030 Plus and 035 excavators and provides an introduction, table of contents, and sections on safety, machine components and specifications, engines, hydraulic systems, and maintenance procedures.
Daewoo doosan solar 030 plus excavator service repair manualfjjskewekfsmem
- Yanmar reserves the right to improve products at any time without obligation to update previously sold products. Consumers should contact distributors for recent documentation on purchased equipment.
- Illustrations in the manual are representations and may vary from actual equipment.
- The shop manual covers Solar 030 Plus and 035 excavators and provides an introduction, table of contents, and sections on safety, machine components and specifications, engines, hydraulic systems, and maintenance procedures.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2024 State of Marketing Report – by HubspotMarius Sescu
https://www.hubspot.com/state-of-marketing
· Scaling relationships and proving ROI
· Social media is the place for search, sales, and service
· Authentic influencer partnerships fuel brand growth
· The strongest connections happen via call, click, chat, and camera.
· Time saved with AI leads to more creative work
· Seeking: A single source of truth
· TLDR; Get on social, try AI, and align your systems.
· More human marketing, powered by robots
ChatGPT is a revolutionary addition to the world since its introduction in 2022. A big shift in the sector of information gathering and processing happened because of this chatbot. What is the story of ChatGPT? How is the bot responding to prompts and generating contents? Swipe through these slides prepared by Expeed Software, a web development company regarding the development and technical intricacies of ChatGPT!
Product Design Trends in 2024 | Teenage EngineeringsPixeldarts
The realm of product design is a constantly changing environment where technology and style intersect. Every year introduces fresh challenges and exciting trends that mold the future of this captivating art form. In this piece, we delve into the significant trends set to influence the look and functionality of product design in the year 2024.
How Race, Age and Gender Shape Attitudes Towards Mental HealthThinkNow
Mental health has been in the news quite a bit lately. Dozens of U.S. states are currently suing Meta for contributing to the youth mental health crisis by inserting addictive features into their products, while the U.S. Surgeon General is touring the nation to bring awareness to the growing epidemic of loneliness and isolation. The country has endured periods of low national morale, such as in the 1970s when high inflation and the energy crisis worsened public sentiment following the Vietnam War. The current mood, however, feels different. Gallup recently reported that national mental health is at an all-time low, with few bright spots to lift spirits.
To better understand how Americans are feeling and their attitudes towards mental health in general, ThinkNow conducted a nationally representative quantitative survey of 1,500 respondents and found some interesting differences among ethnic, age and gender groups.
Technology
For example, 52% agree that technology and social media have a negative impact on mental health, but when broken out by race, 61% of Whites felt technology had a negative effect, and only 48% of Hispanics thought it did.
While technology has helped us keep in touch with friends and family in faraway places, it appears to have degraded our ability to connect in person. Staying connected online is a double-edged sword since the same news feed that brings us pictures of the grandkids and fluffy kittens also feeds us news about the wars in Israel and Ukraine, the dysfunction in Washington, the latest mass shooting and the climate crisis.
Hispanics may have a built-in defense against the isolation technology breeds, owing to their large, multigenerational households, strong social support systems, and tendency to use social media to stay connected with relatives abroad.
Age and Gender
When asked how individuals rate their mental health, men rate it higher than women by 11 percentage points, and Baby Boomers rank it highest at 83%, saying it’s good or excellent vs. 57% of Gen Z saying the same.
Gen Z spends the most amount of time on social media, so the notion that social media negatively affects mental health appears to be correlated. Unfortunately, Gen Z is also the generation that’s least comfortable discussing mental health concerns with healthcare professionals. Only 40% of them state they’re comfortable discussing their issues with a professional compared to 60% of Millennials and 65% of Boomers.
Race Affects Attitudes
As seen in previous research conducted by ThinkNow, Asian Americans lag other groups when it comes to awareness of mental health issues. Twenty-four percent of Asian Americans believe that having a mental health issue is a sign of weakness compared to the 16% average for all groups. Asians are also considerably less likely to be aware of mental health services in their communities (42% vs. 55%) and most likely to seek out information on social media (51% vs. 35%).
AI Trends in Creative Operations 2024 by Artwork Flow.pdfmarketingartwork
Creative operations teams expect increased AI use in 2024. Currently, over half of tasks are not AI-enabled, but this is expected to decrease in the coming year. ChatGPT is the most popular AI tool currently. Business leaders are more actively exploring AI benefits than individual contributors. Most respondents do not believe AI will impact workforce size in 2024. However, some inhibitions still exist around AI accuracy and lack of understanding. Creatives primarily want to use AI to save time on mundane tasks and boost productivity.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2024 State of Marketing Report – by HubspotMarius Sescu
https://www.hubspot.com/state-of-marketing
· Scaling relationships and proving ROI
· Social media is the place for search, sales, and service
· Authentic influencer partnerships fuel brand growth
· The strongest connections happen via call, click, chat, and camera.
· Time saved with AI leads to more creative work
· Seeking: A single source of truth
· TLDR; Get on social, try AI, and align your systems.
· More human marketing, powered by robots
ChatGPT is a revolutionary addition to the world since its introduction in 2022. A big shift in the sector of information gathering and processing happened because of this chatbot. What is the story of ChatGPT? How is the bot responding to prompts and generating contents? Swipe through these slides prepared by Expeed Software, a web development company regarding the development and technical intricacies of ChatGPT!
Product Design Trends in 2024 | Teenage EngineeringsPixeldarts
The realm of product design is a constantly changing environment where technology and style intersect. Every year introduces fresh challenges and exciting trends that mold the future of this captivating art form. In this piece, we delve into the significant trends set to influence the look and functionality of product design in the year 2024.
How Race, Age and Gender Shape Attitudes Towards Mental HealthThinkNow
Mental health has been in the news quite a bit lately. Dozens of U.S. states are currently suing Meta for contributing to the youth mental health crisis by inserting addictive features into their products, while the U.S. Surgeon General is touring the nation to bring awareness to the growing epidemic of loneliness and isolation. The country has endured periods of low national morale, such as in the 1970s when high inflation and the energy crisis worsened public sentiment following the Vietnam War. The current mood, however, feels different. Gallup recently reported that national mental health is at an all-time low, with few bright spots to lift spirits.
To better understand how Americans are feeling and their attitudes towards mental health in general, ThinkNow conducted a nationally representative quantitative survey of 1,500 respondents and found some interesting differences among ethnic, age and gender groups.
Technology
For example, 52% agree that technology and social media have a negative impact on mental health, but when broken out by race, 61% of Whites felt technology had a negative effect, and only 48% of Hispanics thought it did.
While technology has helped us keep in touch with friends and family in faraway places, it appears to have degraded our ability to connect in person. Staying connected online is a double-edged sword since the same news feed that brings us pictures of the grandkids and fluffy kittens also feeds us news about the wars in Israel and Ukraine, the dysfunction in Washington, the latest mass shooting and the climate crisis.
Hispanics may have a built-in defense against the isolation technology breeds, owing to their large, multigenerational households, strong social support systems, and tendency to use social media to stay connected with relatives abroad.
Age and Gender
When asked how individuals rate their mental health, men rate it higher than women by 11 percentage points, and Baby Boomers rank it highest at 83%, saying it’s good or excellent vs. 57% of Gen Z saying the same.
Gen Z spends the most amount of time on social media, so the notion that social media negatively affects mental health appears to be correlated. Unfortunately, Gen Z is also the generation that’s least comfortable discussing mental health concerns with healthcare professionals. Only 40% of them state they’re comfortable discussing their issues with a professional compared to 60% of Millennials and 65% of Boomers.
Race Affects Attitudes
As seen in previous research conducted by ThinkNow, Asian Americans lag other groups when it comes to awareness of mental health issues. Twenty-four percent of Asian Americans believe that having a mental health issue is a sign of weakness compared to the 16% average for all groups. Asians are also considerably less likely to be aware of mental health services in their communities (42% vs. 55%) and most likely to seek out information on social media (51% vs. 35%).
AI Trends in Creative Operations 2024 by Artwork Flow.pdfmarketingartwork
Creative operations teams expect increased AI use in 2024. Currently, over half of tasks are not AI-enabled, but this is expected to decrease in the coming year. ChatGPT is the most popular AI tool currently. Business leaders are more actively exploring AI benefits than individual contributors. Most respondents do not believe AI will impact workforce size in 2024. However, some inhibitions still exist around AI accuracy and lack of understanding. Creatives primarily want to use AI to save time on mundane tasks and boost productivity.
Organizational culture includes values, norms, systems, symbols, language, assumptions, beliefs, and habits that influence employee behaviors and how people interpret those behaviors. It is important because culture can help or hinder a company's success. Some key aspects of Netflix's culture that help it achieve results include hiring smartly so every position has stars, focusing on attitude over just aptitude, and having a strict policy against peacocks, whiners, and jerks.
PEPSICO Presentation to CAGNY Conference Feb 2024Neil Kimberley
PepsiCo provided a safe harbor statement noting that any forward-looking statements are based on currently available information and are subject to risks and uncertainties. It also provided information on non-GAAP measures and directing readers to its website for disclosure and reconciliation. The document then discussed PepsiCo's business overview, including that it is a global beverage and convenient food company with iconic brands, $91 billion in net revenue in 2023, and nearly $14 billion in core operating profit. It operates through a divisional structure with a focus on local consumers.
Content Methodology: A Best Practices Report (Webinar)contently
This document provides an overview of content methodology best practices. It defines content methodology as establishing objectives, KPIs, and a culture of continuous learning and iteration. An effective methodology focuses on connecting with audiences, creating optimal content, and optimizing processes. It also discusses why a methodology is needed due to the competitive landscape, proliferation of channels, and opportunities for improvement. Components of an effective methodology include defining objectives and KPIs, audience analysis, identifying opportunities, and evaluating resources. The document concludes with recommendations around creating a content plan, testing and optimizing content over 90 days.
How to Prepare For a Successful Job Search for 2024Albert Qian
The document provides guidance on preparing a job search for 2024. It discusses the state of the job market, focusing on growth in AI and healthcare but also continued layoffs. It recommends figuring out what you want to do by researching interests and skills, then conducting informational interviews. The job search should involve building a personal brand on LinkedIn, actively applying to jobs, tailoring resumes and interviews, maintaining job hunting as a habit, and continuing self-improvement. Once hired, the document advises setting new goals and keeping skills and networking active in case of future opportunities.
A report by thenetworkone and Kurio.
The contributing experts and agencies are (in an alphabetical order): Sylwia Rytel, Social Media Supervisor, 180heartbeats + JUNG v MATT (PL), Sharlene Jenner, Vice President - Director of Engagement Strategy, Abelson Taylor (USA), Alex Casanovas, Digital Director, Atrevia (ES), Dora Beilin, Senior Social Strategist, Barrett Hoffher (USA), Min Seo, Campaign Director, Brand New Agency (KR), Deshé M. Gully, Associate Strategist, Day One Agency (USA), Francesca Trevisan, Strategist, Different (IT), Trevor Crossman, CX and Digital Transformation Director; Olivia Hussey, Strategic Planner; Simi Srinarula, Social Media Manager, The Hallway (AUS), James Hebbert, Managing Director, Hylink (CN / UK), Mundy Álvarez, Planning Director; Pedro Rojas, Social Media Manager; Pancho González, CCO, Inbrax (CH), Oana Oprea, Head of Digital Planning, Jam Session Agency (RO), Amy Bottrill, Social Account Director, Launch (UK), Gaby Arriaga, Founder, Leonardo1452 (MX), Shantesh S Row, Creative Director, Liwa (UAE), Rajesh Mehta, Chief Strategy Officer; Dhruv Gaur, Digital Planning Lead; Leonie Mergulhao, Account Supervisor - Social Media & PR, Medulla (IN), Aurelija Plioplytė, Head of Digital & Social, Not Perfect (LI), Daiana Khaidargaliyeva, Account Manager, Osaka Labs (UK / USA), Stefanie Söhnchen, Vice President Digital, PIABO Communications (DE), Elisabeth Winiartati, Managing Consultant, Head of Global Integrated Communications; Lydia Aprina, Account Manager, Integrated Marketing and Communications; Nita Prabowo, Account Manager, Integrated Marketing and Communications; Okhi, Web Developer, PNTR Group (ID), Kei Obusan, Insights Director; Daffi Ranandi, Insights Manager, Radarr (SG), Gautam Reghunath, Co-founder & CEO, Talented (IN), Donagh Humphreys, Head of Social and Digital Innovation, THINKHOUSE (IRE), Sarah Yim, Strategy Director, Zulu Alpha Kilo (CA).
Trends In Paid Search: Navigating The Digital Landscape In 2024Search Engine Journal
The search marketing landscape is evolving rapidly with new technologies, and professionals, like you, rely on innovative paid search strategies to meet changing demands.
It’s important that you’re ready to implement new strategies in 2024.
Check this out and learn the top trends in paid search advertising that are expected to gain traction, so you can drive higher ROI more efficiently in 2024.
You’ll learn:
- The latest trends in AI and automation, and what this means for an evolving paid search ecosystem.
- New developments in privacy and data regulation.
- Emerging ad formats that are expected to make an impact next year.
Watch Sreekant Lanka from iQuanti and Irina Klein from OneMain Financial as they dive into the future of paid search and explore the trends, strategies, and technologies that will shape the search marketing landscape.
If you’re looking to assess your paid search strategy and design an industry-aligned plan for 2024, then this webinar is for you.
5 Public speaking tips from TED - Visualized summarySpeakerHub
From their humble beginnings in 1984, TED has grown into the world’s most powerful amplifier for speakers and thought-leaders to share their ideas. They have over 2,400 filmed talks (not including the 30,000+ TEDx videos) freely available online, and have hosted over 17,500 events around the world.
With over one billion views in a year, it’s no wonder that so many speakers are looking to TED for ideas on how to share their message more effectively.
The article “5 Public-Speaking Tips TED Gives Its Speakers”, by Carmine Gallo for Forbes, gives speakers five practical ways to connect with their audience, and effectively share their ideas on stage.
Whether you are gearing up to get on a TED stage yourself, or just want to master the skills that so many of their speakers possess, these tips and quotes from Chris Anderson, the TED Talks Curator, will encourage you to make the most impactful impression on your audience.
See the full article and more summaries like this on SpeakerHub here: https://speakerhub.com/blog/5-presentation-tips-ted-gives-its-speakers
See the original article on Forbes here:
http://www.forbes.com/forbes/welcome/?toURL=http://www.forbes.com/sites/carminegallo/2016/05/06/5-public-speaking-tips-ted-gives-its-speakers/&refURL=&referrer=#5c07a8221d9b
ChatGPT and the Future of Work - Clark Boyd Clark Boyd
Everyone is in agreement that ChatGPT (and other generative AI tools) will shape the future of work. Yet there is little consensus on exactly how, when, and to what extent this technology will change our world.
Businesses that extract maximum value from ChatGPT will use it as a collaborative tool for everything from brainstorming to technical maintenance.
For individuals, now is the time to pinpoint the skills the future professional will need to thrive in the AI age.
Check out this presentation to understand what ChatGPT is, how it will shape the future of work, and how you can prepare to take advantage.
The document provides career advice for getting into the tech field, including:
- Doing projects and internships in college to build a portfolio.
- Learning about different roles and technologies through industry research.
- Contributing to open source projects to build experience and network.
- Developing a personal brand through a website and social media presence.
- Networking through events, communities, and finding a mentor.
- Practicing interviews through mock interviews and whiteboarding coding questions.
Google's Just Not That Into You: Understanding Core Updates & Search IntentLily Ray
1. Core updates from Google periodically change how its algorithms assess and rank websites and pages. This can impact rankings through shifts in user intent, site quality issues being caught up to, world events influencing queries, and overhauls to search like the E-A-T framework.
2. There are many possible user intents beyond just transactional, navigational and informational. Identifying intent shifts is important during core updates. Sites may need to optimize for new intents through different content types and sections.
3. Responding effectively to core updates requires analyzing "before and after" data to understand changes, identifying new intents or page types, and ensuring content matches appropriate intents across video, images, knowledge graphs and more.
A brief introduction to DataScience with explaining of the concepts, algorithms, machine learning, supervised and unsupervised learning, clustering, statistics, data preprocessing, real-world applications etc.
It's part of a Data Science Corner Campaign where I will be discussing the fundamentals of DataScience, AIML, Statistics etc.
Time Management & Productivity - Best PracticesVit Horky
Here's my presentation on by proven best practices how to manage your work time effectively and how to improve your productivity. It includes practical tips and how to use tools such as Slack, Google Apps, Hubspot, Google Calendar, Gmail and others.
The six step guide to practical project managementMindGenius
The six step guide to practical project management
If you think managing projects is too difficult, think again.
We’ve stripped back project management processes to the
basics – to make it quicker and easier, without sacrificing
the vital ingredients for success.
“If you’re looking for some real-world guidance, then The Six Step Guide to Practical Project Management will help.”
Dr Andrew Makar, Tactical Project Management
2. Engine disassembling & assembling
Engine disassembling
Step 1
Remove the pipe (1) from the thermostatic valve
sat, loosen the alternator retaining bolts and
remove the fan drive belt (2).
Step 2
Remove the retaining bolts, fan (1) spacer and
drive pulley (2), detach the return pipe (3) from
the coolant pump.
Step 3
Remove the retaining bolts and detach the
coolant pump (1).
Step 4
Remove the retaining bolts and detach the
coolant pump support (1).
A1.48 MR306-10.2004-EN
3. Engine disassembling & assembling
Engine disassembling
Step 5
Unscrew the unions (2 and 3) on the injection
pump and fuel pump, remove the retaining bolts
and extract the fuel pump, complete with support
lines.
Step 6
Remove the retaining bolts and disconnect the
complete thermostatic valve unit (1).
Step 7
Remove the retaining bolts and remove the
alternator (1), complete with support (2).
Step 8
Unscrew the retaining bolts and disconnect the
exhaust manifold (1).
Step 9
Remove the engine oil filter (2).
MR306-10.2004-EN A1.49
4. Engine disassembling & assembling
Engine disassembling
Step 10
Disconnect the injection pump and injection line
(2).
Step 11
Remove the retaining bolts and remove the inlet
manifold (1).
Step 12
Make sure that there is references marks (2) for
injection pump timing operations and remove the
pump retaining bolts (1).
Step 13
Remove the access cover (1) of the injection
pump drive gearbox.
A1.50 MR306-10.2004-EN
5. Engine disassembling & assembling
Engine disassembling
Step 14
Unscrew the nut securing the injection pump to
the drive gear (1).
Step 15
Extract the injection pump drive gear-using tool
1035170097 (2) and recover the injection pump
and the woodruff key.
Step 16
Unscrew the retaining nuts (1) and recover the
fuel pump support (2).
Step 17
Disconnect the hydraulic delivery & suction pipe
(1 & 2 respectively) by loosening their Allen key
bolts and disconnect the hydraulic filters.
Step 18
Remove the retaining bolts and detach the starter
motor (1).
1
1
2
MR306-10.2004-EN A1.51
6. Engine disassembling & assembling
Engine disassembling
Step 19
Remove the injector mounting nuts, the
underlying spherical washers, then the supports
and the injectors themselves.
Step 20
20.Remove the rocker cover bolts (1), washers
and seals, and then the rocker cover (2) and its
gasket.
Step 21
Remove the rocker shaft retaining bolts (2), and
then remove the entire rocker shaft assembly (1).
Step 22
Remove the valve collets (1) and extract the
pushrods (2).
Step 23
Unscrew the cylinder head bolts (1) and remove
the head using a hoist and lifting hook.
Step 24
Remove the cylinder head gasket.
A1.52 MR306-10.2004-EN
7. Engine disassembling & assembling
Engine disassembling
Step 25
Turn the engine upside down on the rotary stand,
remove the sump pan bolts, the sump pan (1)
and its gasket (2).
Step 26
Unscrew the retaining bolts and remove the oil
pick-up pipe (1) complete with the strain filter and
seal.
Step 27
Unscrew the retaining bolts (2) and detach the
counter weight housing (3) by moving it outward,
remove the sleeve coupling (4) and the housing
(3).
Step 28
Unscrew the sump pan retaining bolts (4) and
remove the sump pan using a hoist, lifting hook
and lifting chain with eyeholes.
Step 29
Remove the half-gaskets (1) and (3) between the
crankcase and sump pan and the gasket (2)
between the timing gear carrier and sump pan.
Step 30
Remove the gasket (1) between the flywheel
carrier and sump pan.
NOTE: When relocating gaskets (1), in this figure
and (2), in previous figure, apply RHODORSIL
CAF 1 silicone sealing compound to the mating
surfaces.
MR306-10.2004-EN A1.53
8. Engine disassembling & assembling
Engine disassembling
Step 31
Remove the rotating counterweight oil seal O-ring
(1) installed on the crankcase-mating surface.
Step 32
Unscrew retaining bolts (1) and remove the
complete oil pump.
NOTE: For model 8045.25.785 refer to point 54.
Step 33
Unscrew the retaining bolts (2) and remove the
crankshaft pulley (1).
Step 34
Straighten the lock tab, hold the crankshaft
against rotation and unscrew nut.
A1.54 MR306-10.2004-EN
9. Engine disassembling & assembling
Engine disassembling
Step 35
Pull the pulley hub off the crankshaft using (1)
and recover the woodruff key.
Step 36
Unscrew the retaining bolt (1) and remove the
timing cover and its gasket.
Step 37
Unscrew the retaining bolts and remove the lift
pump gear carrier (1).
Step 38
Remove the spring ring (1) and remove the thrust
washer and the intermediate gear (2).
NOTE: When refitting the intermediate gear see
engine timing instructions.
MR306-10.2004-EN A1.55
10. Engine disassembling & assembling
Engine disassembling
Step 39
Unscrew the retaining bolts (1) and remove the
intermediate gear journal.
Step 40
Unscrew the retaining bolts (2) and withdraw the
camshaft (3) complete with the crankshaft gear
(1) and the end plate (4).
Step 41
Remove the spring ring (1) and the thrust
washer, and withdraw the gear with fuel supply
pump camshaft (2) from the opposite side.
NOTE: This gear transmits drive to the injection
pump. On re-assembly see timing instructions.
Step 42
Unscrew the retaining bolts (1) and remove the
timing gear case.
A1.56 MR306-10.2004-EN
11. Engine disassembling & assembling
Engine disassembling
Step 43
Remove the O-ring seal (1) installed in the lift
pump drive shaft lubrication line.
Step 44
Remove the crankcase - timing gear case gasket.
Step 45
Rotate the engine on the stand. Unscrew the big-
end cap bolts (2) and recover the big-end caps
with their shell bearings.
Step 46
Slide the pistons (1), complete with rings,
gudgeon pins and connecting rods, out of the
cylinder linings.
Step 47
Rotate the engine on the stand through 90 o
back
to the horizontal position. Unscrew the flywheel
bolts and remove the flywheel with the aid of a
hoist and hook.
Step 48
Unscrew the retaining bolts and remove the rear
oil seal carrier (1) complete with gasket
MR306-10.2004-EN A1.57
12. Engine disassembling & assembling
Engine disassembling
Step 49
Unscrew the main bearing cap bolts (1), and
remove the main bearing caps with relative
bearing shells, and recover the thrust washer
located on the penultimate main bearing, as
shown in the figure.
Step 50
Lift the crankshaft clear of the crankcase using a
hoist and nylon sling. Recover the bearing shells,
thrust washers and tappets.
Step 51
Turn the engine on the stand through 180 o
;
attach the lifting chain with eyeholes to the
crankcase, as shown in the figure.
Step 52
Lift the engine clear of the stand.
Step 53
Unscrew the retaining bolts and remove the rear
crankcase housing (1) and its gasket.
NOTE: Oil pump model 8045.25.785
Step 54
Remove the fixing screws (4), and take off the
washers (3) and the engine lubrication oil pump
(2) complete with pressure relief valve (1).
Step 55
Remove the lubricating oil pipe (3). as shown in
the next figure.
Step 56
Remove spring ring (18)
Step 57
Remove spring ring (25) and cover (23) with
relative O- ring seal (24).
Step 58
Withdraw gear (22) from sump.
A1.58 MR306-10.2004-EN
13. Engine disassembling & assembling
Engine disassembling
Step 59
Remove spring ring (2), gear (26) and the thrust
washers (1).
Step 60
Inspect the shaft (27). If signs of scoring or wear
are evident, the shaft must be replaced.
Step 61
Withdraw the spring pins (4) and dismantle the
counter weight shaft using a suitable drift.
Step 62
Remove the counterweight drive gear (13) by
removing the spring ring (9) and the carrier
retaining bolts (6).
Step 63
Remove spring ring (4) and intermediate gear (3).
1. Thrust washers.
2. Spring ring.
3. Lubricating oil pipe for bushing (28).
4. Shaft retaining spring pin (5).
5. Counterweight rotation shaft.
6. Counterweight.
7. Carrier for counterweight drives gear (13).
8. Thrust washer.
9. Circlip.
10. Counterweight intermediate gear.
11. Bolts securing counterweight housing to
sump.
12. Counterweight housing.
13. Counterweight drives gear.
14. Screen filter.
15. Screen filter retaining bolt
16. Bushing.
17. Rigid coupling sleeve.
18. Spring ring.
19. Thrust washer.
20. Carrier for gear (22).
21. Thrust washer.
22. Counterweight drives gear.
23. Cover.
24. O-ring seal.
25. Spring ring.
26. Intermediate gear.
27. Shaft for gear (26).
28. Bushing.
MR306-10.2004-EN A1.59
14. Engine disassembling & assembling
Engine assembling
General notes and information
- After dismantling the engine, clean all parts carefully.
- To reassemble the engine, carry out the dismantling operations in reverse order mentioned
above.
- Tight the nut/bolt on specified torque.
In addition, make sure to:
- Replace all seals and gaskets at each complete or partial engine rebuild.
- Lubricate all rotating parts and oil seals with engine oil prior to installation.
- Lubricate the oil filter mounting seal prior to filling the filter.
Mounting the balancing device with counter-rotating weight
Disassembling operation 58 to 66
Step 1
Assemble counterweight parts in the housing (2),
carrying out dismantling operations 64 to 66 in
reverse order. Align the positioning marks on the
gear (4) and counterweights (1) (indicated by the
arrows in fig.)
Step 2
The intermediate gear (3) must be installed with
the longer side of its hub towards the casing side.
Step 3
The holes for the lock pins (1) in the
counterweight shafts (2) must be aligned with the
corresponding holes in the casing.
Step 4
Install the counterweight assembly on the sump,
carrying out the operations 58 to 62 in reverse
order.
A1.60 MR306-10.2004-EN
15. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
16. Engine disassembling & assembling
Engine assembling
Mounting the tappets and drive shaft with main bearing caps, bearing and thrust rings:
Checking axial play of drive shaft
Disassembling operation 52 to 53
Step 5
Install the tappets in their crankcase bores.
Step 6
Lubricate the main bearing seal with engine oil
and install the half shell bearings (3).
Step 7
Stick the semi circular thrust washers (1) to both
sides of the penultimate main bearing with
grease (2).
Step 8
Lubricate the upper surfaces of the main bearing
shell with engine oil and lower the crankshaft (1)
into position, taking care not to dislodge the semi-
circular thrust washers installed previously.
Step 9
Lubricate the crankshaft journals with engine oil
and fit the main bearing caps (3) with the half
shells (4), fitting the top semicircular thrust
washers (2) to the penultimate bearing cap.
Step 10
Rotate the crankshaft (1) a few times to allow the
parts to settle into position.
Step 11
Insert the main bearing cap bolts and screw in
until the head of the bolt is up against the cap.
MR306-10.2004-EN A1.61
17. Engine disassembling & assembling
Engine assembling
Mounting the tappets and drive shaft with main bearing caps, bearing and thrust rings:
Checking axial play of drive shaft
Step 12
Tighten all cap bolts (1) to a torque of 80Nm.
Step 13
Tighten each cap bolt (1) through a further 90°
using the tool 1035170088 (2).
Step 14
Check that the crankshaft end float does not
exceed the value specified.
A1.62 MR306-10.2004-EN
18. Engine disassembling & assembling
Engine assembling
Mounting the rear cover with seal and engine flywheel
Disassembling operation 51
Step 15
Fill the rear oil seal carrier (3) with outer seal.
Tighten the retaining bolt (2) to the specified
torque. Using a feeler gauge (1), check that the
crankshaft flange is coaxial with the carrier.
Step 16
Fit the inner rear oil seal using installer
1035170090 (1) and handgrip.
Step 17
Fit the flywheel and tighten the retaining bolts (1)
to a torque of 40Nm.
Step 18
Using tool 1035170088 (1), tighten each flywheel
bolt (2) through a further 60o
.
MR306-10.2004-EN A1.63
19. Engine disassembling & assembling
Engine assembling
Mounting the pistons complete with rings, pins, connecting rods, big end bearings:
Checking protrusion in relation to cylinder block face
Disassembling operation 48 to 49
Step 19
Lubricate pistons, rings and cylinder liners with
engine oil prior to fitting.
Step 20
Using the piston ring pliers (As shown in fig.) fit
the piston rings. Make sure that the piston ring
gaps are offset at 180°..
Step 21
Fit piston ring clamp to compress the rings,
making sure that the piston ring gaps remain in
the position specified in the previous point.
Step 22
Insert the piston / connecting rod into the cylinder
liner, checking that the connecting rod number
corresponds with the cylinder number and that
the number stamped on the connecting rod is
facing away from the camshaft.
Step 23
Fit the big-end caps (1), complete with shells, to
the crank pins and tighten the cap bolts (2) to a
torque of 40Nm.
Step 24
Using tool 292248 (1), tighten each big-end cap
bolt (2) through a further 60°.
Step 25
Rotate the engine on the stand through 180° and
clean the upper face of the cylinder block.
Bring the pistons (2), up to TDC and, using a dial
gauge with a magnetic base (1), check that the
piston protrusion from the cylinder block face is
within the tolerance limits.
A1.64 MR306-10.2004-EN