This document provides technical specifications and descriptions for components of a Celtis engine, including:
- The cylinder head design uses a cross-flow configuration to improve air/fuel mixing.
- Valves have rotators to keep the contact surface clean and umbrella seals to lubricate the valve stems.
- Pre-heating is controlled by the engine ECU on electronic injection models and lasts up to 20 seconds.
- Particulate rebreathing is achieved through a duct between the exhaust and air filter.
- Head gasket failure investigation procedures include visual inspections and a pressurized cooling system test.
CLAAS CELTIS 456-426 RA (Type A07) Tractor Service Repair Manual.pdfjiaoyi82414369
This document provides technical specifications and descriptions for various engine components of a Celtis engine, including:
- The cylinder head design with cross-flow inlet ducts and cast letter identifying the model.
- Dimensions for valves, rocker shafts, and the turbocharger.
- Procedures for checking valve lift and investigating head gasket failures.
- Schematics of the air intake system showing components like the filter and intercooler.
- Details on pre-heating operation for different injection models.
- Symptoms and causes of combustion gas and coolant sealing issues related to the head gasket.
CLAAS CELTIS 456-426 RX (Type A07) Tractor Service Repair Manual.pdfjiaoyi82414369
This document provides technical specifications and descriptions for various engine components of a Celtis engine, including:
- The cylinder head design with cross-flow inlet ducts and cast letter identifying the model.
- Dimensions for valves, rocker shafts, and the turbocharger.
- Procedures for checking valve lift and investigating head gasket failures.
- Schematics of the air intake system showing components like the filter and intercooler.
- Descriptions of the pre-heating system for mechanical and electronic injection engines.
CLAAS CELTIS 456-426 RC (Type A07) Tractor Service Repair Manual.pdfjiaoyi82414369
This document provides technical specifications and descriptions for components of the Celtis engine. It includes dimensions and specifications for the cylinder head, valves, turbocharger, cooling system, and other parts. Procedures are described for checking valve lift, investigating head gasket failures, checking turbocharger pressure, and cooling system operation. Diagrams are included to illustrate air and coolant flow through the engine.
CLAAS CELTIS 456-426 RX (Type A07) Tractor Service Repair Manual.pdfcangci7058
This document provides technical specifications and descriptions for components of the Celtis engine. It includes dimensions and specifications for the cylinder head, valves, turbocharger, cooling system, and other parts. Procedures are outlined for checking valve lift, investigating head gasket failures, checking turbocharger pressure, and cooling system operation. Diagrams illustrate the air intake and cooling system schematics. Tolerances and specifications are provided to check components for wear.
CLAAS CELTIS 456-426 RC (Type A07) Tractor Service Repair Manual.pdfcangci7058
This document provides technical specifications and descriptions for various engine components of a Celtis engine, including:
- The cylinder head design with cross-flow inlet ducts and cast letter identifying the model.
- Dimensions for valves, rocker shafts, and the turbocharger.
- A schematic diagram of the air circulation system showing components like the filter and intercooler.
- Procedures for checking valve lift and investigating head gasket failures.
- Descriptions of combustion gas and coolant sealing, along with symptoms of failures.
CLAAS CELTIS 456-426 RA (Type A07) Tractor Service Repair Manual.pdfcangci7058
This document provides technical specifications and descriptions for components of the Celtis engine. It includes dimensions and specifications for the cylinder head, valves, turbocharger, cooling system, and other parts. Procedures are outlined for checking valve lift, investigating head gasket failures, checking turbocharger pressure, and cooling system operation. Diagrams illustrate the air intake and cooling system schematics. Tolerances and specifications are provided to check components for wear.
Kubota B7500D Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
This parts book page provides information for a crankcase part, including:
- The part number, description, quantity used, serial number range compatibility, interchangeability, and remarks for each sub-part.
- Weights for the composite crankcase parts in kilograms and pounds.
- Serial number ranges indicate compatibility for older and newer models.
- Remarks provide additional part information like country exceptions.
Kubota B7400HSD Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
The document provides instructions for using a parts book for a machine. It begins with descriptions of the column headings used on parts pages, including part number, description, quantity, and compatibility information. It then lists country codes that may be included and what they indicate. The remainder of the document is an example parts book index and pages for specific parts of the machine like the crankcase, oil pan, and their associated part numbers and details.
CLAAS CELTIS 456-426 RA (Type A07) Tractor Service Repair Manual.pdfjiaoyi82414369
This document provides technical specifications and descriptions for various engine components of a Celtis engine, including:
- The cylinder head design with cross-flow inlet ducts and cast letter identifying the model.
- Dimensions for valves, rocker shafts, and the turbocharger.
- Procedures for checking valve lift and investigating head gasket failures.
- Schematics of the air intake system showing components like the filter and intercooler.
- Details on pre-heating operation for different injection models.
- Symptoms and causes of combustion gas and coolant sealing issues related to the head gasket.
CLAAS CELTIS 456-426 RX (Type A07) Tractor Service Repair Manual.pdfjiaoyi82414369
This document provides technical specifications and descriptions for various engine components of a Celtis engine, including:
- The cylinder head design with cross-flow inlet ducts and cast letter identifying the model.
- Dimensions for valves, rocker shafts, and the turbocharger.
- Procedures for checking valve lift and investigating head gasket failures.
- Schematics of the air intake system showing components like the filter and intercooler.
- Descriptions of the pre-heating system for mechanical and electronic injection engines.
CLAAS CELTIS 456-426 RC (Type A07) Tractor Service Repair Manual.pdfjiaoyi82414369
This document provides technical specifications and descriptions for components of the Celtis engine. It includes dimensions and specifications for the cylinder head, valves, turbocharger, cooling system, and other parts. Procedures are described for checking valve lift, investigating head gasket failures, checking turbocharger pressure, and cooling system operation. Diagrams are included to illustrate air and coolant flow through the engine.
CLAAS CELTIS 456-426 RX (Type A07) Tractor Service Repair Manual.pdfcangci7058
This document provides technical specifications and descriptions for components of the Celtis engine. It includes dimensions and specifications for the cylinder head, valves, turbocharger, cooling system, and other parts. Procedures are outlined for checking valve lift, investigating head gasket failures, checking turbocharger pressure, and cooling system operation. Diagrams illustrate the air intake and cooling system schematics. Tolerances and specifications are provided to check components for wear.
CLAAS CELTIS 456-426 RC (Type A07) Tractor Service Repair Manual.pdfcangci7058
This document provides technical specifications and descriptions for various engine components of a Celtis engine, including:
- The cylinder head design with cross-flow inlet ducts and cast letter identifying the model.
- Dimensions for valves, rocker shafts, and the turbocharger.
- A schematic diagram of the air circulation system showing components like the filter and intercooler.
- Procedures for checking valve lift and investigating head gasket failures.
- Descriptions of combustion gas and coolant sealing, along with symptoms of failures.
CLAAS CELTIS 456-426 RA (Type A07) Tractor Service Repair Manual.pdfcangci7058
This document provides technical specifications and descriptions for components of the Celtis engine. It includes dimensions and specifications for the cylinder head, valves, turbocharger, cooling system, and other parts. Procedures are outlined for checking valve lift, investigating head gasket failures, checking turbocharger pressure, and cooling system operation. Diagrams illustrate the air intake and cooling system schematics. Tolerances and specifications are provided to check components for wear.
Kubota B7500D Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
This parts book page provides information for a crankcase part, including:
- The part number, description, quantity used, serial number range compatibility, interchangeability, and remarks for each sub-part.
- Weights for the composite crankcase parts in kilograms and pounds.
- Serial number ranges indicate compatibility for older and newer models.
- Remarks provide additional part information like country exceptions.
Kubota B7400HSD Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
The document provides instructions for using a parts book for a machine. It begins with descriptions of the column headings used on parts pages, including part number, description, quantity, and compatibility information. It then lists country codes that may be included and what they indicate. The remainder of the document is an example parts book index and pages for specific parts of the machine like the crankcase, oil pan, and their associated part numbers and details.
Kubota B7410D Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages, including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included and their meanings. The document then provides an example page from the parts book that lists specific part numbers, descriptions, quantities, and other details for various engine parts.
Kubota B7510HSD Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
The document provides instructions for parts books. It explains the column headings used on parts number pages including reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included and their meanings. The second section is a sample page from a parts book listing parts for a B7510HSD engine with their numbers, descriptions and other details.
Kubota B7200D Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
This document provides instructions and definitions for parts books. It explains that the heading on parts pages will match the picture page. It defines the column headings for part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes may be included and provides examples. Finally, it lists an index of part names and their corresponding reference pages in the parts book.
Kubota B7200HSTD Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
This document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It notes country codes may be included and provides an example. The document then provides an index of part numbers and references for an engine and related systems to illustrate the parts book format.
Kubota B7200E Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
This document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included and what they indicate for part differences between countries.
Komatsu 12V170-2 Series Engine Service Repair Manual.pdfdksmiekddmdmd
This document provides disassembly instructions for an engine. It lists 21 steps to disassemble parts like the air cleaner, muffler, turbocharger, exhaust manifolds, water pump, and oil cooler. Safety precautions are provided, such as draining fluids and cleaning parts before disassembly. Weights and removal tools are noted for some components. The instructions are accompanied by diagrams to illustrate the disassembly process.
Kubota BX23D Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages, including the reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included and their meanings. The remainder of the document lists specific part numbers and descriptions for an engine labeled BX23D organized by system.
Kubota BX22D Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
The document provides instructions and part listings for a parts book. It begins with definitions of the column headings used in part number pages, including references numbers, part numbers, descriptions, quantities, serial number ranges and interchangeability. It then provides notes about country codes that may be included. The remainder of the document consists of four sample part listing pages from the parts book with detailed part numbers, descriptions and other specified information.
KOBELCO 230SRLC-3 Tier 4 HYDRAULIC EXCAVATOR Service Repair Manual.pdfdksmiekddmdmd
This document is a service manual for the Kobelco 230SRLC-3 hydraulic excavator. It contains safety information and instructions for specifications, maintenance, troubleshooting, disassembly, and installing options for the excavator. The manual instructs technicians on proper procedures and safety precautions to follow when servicing the machine.
Toyota 2TE18 Electric Powered Towing Tractor Service Repair Manual.pdfdksmiekddmdmd
This document is a service manual for the Toyota Electric Powered Towing Tractor models 2TE15 and 2TE18. It contains maintenance, specifications, and repair procedures for the chassis, body, and other components of the vehicles. The manual provides instructions on inspection methods, component weights, jacking, hoisting, and other general tips for servicing the towing tractors. It also includes sections on the electrical system, battery, charger, controller, and other major vehicle systems. Standard bolt tightening torques and a lubrication chart are provided at the end.
Toyota 2TE15 Electric Powered Towing Tractor Service Repair Manual.pdfdksmiekddmdmd
This document is a service manual for the Toyota Electric Powered Towing Tractor models 2TE15 and 2TE18. It contains maintenance, specifications, and repair procedures for the chassis, body, and other components of the vehicles. The manual provides instructions for proper servicing of the towing tractors and deals with the models as of October 2005. It notes that values may differ from actual vehicles due to design changes.
The manual includes sections on the battery, charger, controller, display functions, electrical troubleshooting, motor, drive unit, rear axle, front axle, suspension, steering, brake, body, and appendices. It provides operating tips, instructions for jacking and hoisting the vehicles
Hyundai HLF202530(C)-5 Forklift Truck Service Repair Manual.pdfdksmiekddmdmd
This document provides instructions for disassembly and assembly of a steering unit. The key steps are:
1) Disassemble by removing the end cover, gearwheel set, cardan shaft, distributor plate, check valve parts, bearing races, cross pin, and seals.
2) Assemble by installing the seals, bearing races, cross pin, spool/sleeve with neutral position springs, distributor plate, cardan shaft, O-rings, and end cover. Proper positioning of parts is important for correct assembly.
3) Tightening torques are provided for reinstallation of the steering unit.
CLAAS NECTIS VE 237 2+4WD (Type T14) Tractor Service Repair Manual.pdfdksmiekddmdmd
1. The document provides identification information for injector pumps and injectors used in various tractor models. It identifies the manufacturer, models, and specifications of the injector pumps and injectors.
2. The fuel injection system is described including the fuel tank, lines, filters, pump, and injectors. The operating principle and components of the injector pump are explained along with diagrams.
3. Torque settings and adjustment procedures are provided for the accelerator control and injector pump internal settings.
CLAAS NECTIS VE 217 2+4WD (Type T14) Tractor Service Repair Manual.pdfdksmiekddmdmd
1) The document provides identification information for injector pumps used on various tractor models, including the engine, number of cylinders, injector pump model, and injection sequence.
2) It describes the components and operation of the fuel injection system, including the fuel tank, lines, filter, pump, injectors and electrical components. Diagrams show the component layout and labeling.
3) Procedures are provided for checking and adjusting aspects of the system, such as the accelerator control, injector pump timing, injector pressure, and supply pressure. Removal and refitting of components like the fuel filter are also described.
CLAAS NECTIS VE 227 2+4WD (Type T14) Tractor Service Repair Manual.pdfdksmiekddmdmd
1) The document provides identification information for injector pumps used on various tractor models, including the engine, number of cylinders, injector pump model, and injection sequence.
2) It describes the components and operation of the fuel injection system, including the fuel tank, lines, filter, pump, injectors and electrical components like sensors and solenoids.
3) Checks and adjustments are described for components like the accelerator control, injector pump timing, injectors, supply pressure and removal/refitting of the fuel filter. Torque settings and identification information is also provided.
Bobcat AL440 Wheel Loader Service Repair Manual SN A01N11001 & above.pdfdksmiekddmdmd
This document provides safety information and guidelines for operating Bobcat AL275, AL350, and AL440 earthmoving machines. It outlines important safety considerations regarding the danger zone around the machine, transporting passengers, stability, overhead hazards, and more. Proper personal protective equipment is required, and only trained operators over the legal age may operate the equipment. Precautions must be taken when working near power lines, excavations, and other hazards. The machines must be safely parked when not in use.
Bobcat AL275 Wheel Loader Service Repair Manual SN A01L11001 & above.pdfdksmiekddmdmd
This document is a service manual for Bobcat AL275, AL350, and AL440 earth-moving machines. It provides safety information and pictograms for the correct operation and maintenance of these machines. Doosan purchased Bobcat from Ingersoll-Rand in 2007, and any reference to Ingersoll-Rand in the manual is historical only. The manual outlines safety notes, operating instructions, and hazards associated with these earth-moving machines. Personnel must be properly trained, wear protective equipment, and follow all safety procedures and maintenance schedules when operating or servicing these vehicles.
Bobcat AL350 Wheel Loader Service Repair Manual SN A01M11001 & above.pdfdksmiekddmdmd
This document is a service manual for Bobcat AL275, AL350, and AL440 earth-moving machines. It provides safety information and pictograms for the correct operation and maintenance of these machines. Doosan purchased Bobcat from Ingersoll-Rand in 2007, and any reference to Ingersoll-Rand in the manual is historical only. The manual outlines safety notes, operating instructions, and hazards associated with these earth-moving machines. Personnel must be properly trained, wear protective equipment, and not enter danger zones during operation to safely use this equipment.
CLAAS CELTIS 456-426 RX (Type A07) Tractor Service Repair Manual.pdfdksmiekddmdmd
This document provides technical specifications and descriptions for engine components of a Celtis engine, including:
- The cylinder head design with cross-flow inlet ducts and cast letter identifying the model.
- Valve components like guides, seals, and rotators to improve lubrication and cleaning.
- Schematics of the air intake and cooling systems showing components like the turbocharger, intercooler, and thermostat.
- Dimensions and tolerances for parts like the cylinder head, valves, and rocker shaft.
- Procedures for checking the turbocharger pressure and inspecting the cylinder head gasket for failures.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Kubota B7410D Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages, including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included and their meanings. The document then provides an example page from the parts book that lists specific part numbers, descriptions, quantities, and other details for various engine parts.
Kubota B7510HSD Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
The document provides instructions for parts books. It explains the column headings used on parts number pages including reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included and their meanings. The second section is a sample page from a parts book listing parts for a B7510HSD engine with their numbers, descriptions and other details.
Kubota B7200D Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
This document provides instructions and definitions for parts books. It explains that the heading on parts pages will match the picture page. It defines the column headings for part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes may be included and provides examples. Finally, it lists an index of part names and their corresponding reference pages in the parts book.
Kubota B7200HSTD Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
This document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It notes country codes may be included and provides an example. The document then provides an index of part numbers and references for an engine and related systems to illustrate the parts book format.
Kubota B7200E Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
This document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included and what they indicate for part differences between countries.
Komatsu 12V170-2 Series Engine Service Repair Manual.pdfdksmiekddmdmd
This document provides disassembly instructions for an engine. It lists 21 steps to disassemble parts like the air cleaner, muffler, turbocharger, exhaust manifolds, water pump, and oil cooler. Safety precautions are provided, such as draining fluids and cleaning parts before disassembly. Weights and removal tools are noted for some components. The instructions are accompanied by diagrams to illustrate the disassembly process.
Kubota BX23D Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages, including the reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included and their meanings. The remainder of the document lists specific part numbers and descriptions for an engine labeled BX23D organized by system.
Kubota BX22D Tractor Parts Catalogue Manual.pdfdksmiekddmdmd
The document provides instructions and part listings for a parts book. It begins with definitions of the column headings used in part number pages, including references numbers, part numbers, descriptions, quantities, serial number ranges and interchangeability. It then provides notes about country codes that may be included. The remainder of the document consists of four sample part listing pages from the parts book with detailed part numbers, descriptions and other specified information.
KOBELCO 230SRLC-3 Tier 4 HYDRAULIC EXCAVATOR Service Repair Manual.pdfdksmiekddmdmd
This document is a service manual for the Kobelco 230SRLC-3 hydraulic excavator. It contains safety information and instructions for specifications, maintenance, troubleshooting, disassembly, and installing options for the excavator. The manual instructs technicians on proper procedures and safety precautions to follow when servicing the machine.
Toyota 2TE18 Electric Powered Towing Tractor Service Repair Manual.pdfdksmiekddmdmd
This document is a service manual for the Toyota Electric Powered Towing Tractor models 2TE15 and 2TE18. It contains maintenance, specifications, and repair procedures for the chassis, body, and other components of the vehicles. The manual provides instructions on inspection methods, component weights, jacking, hoisting, and other general tips for servicing the towing tractors. It also includes sections on the electrical system, battery, charger, controller, and other major vehicle systems. Standard bolt tightening torques and a lubrication chart are provided at the end.
Toyota 2TE15 Electric Powered Towing Tractor Service Repair Manual.pdfdksmiekddmdmd
This document is a service manual for the Toyota Electric Powered Towing Tractor models 2TE15 and 2TE18. It contains maintenance, specifications, and repair procedures for the chassis, body, and other components of the vehicles. The manual provides instructions for proper servicing of the towing tractors and deals with the models as of October 2005. It notes that values may differ from actual vehicles due to design changes.
The manual includes sections on the battery, charger, controller, display functions, electrical troubleshooting, motor, drive unit, rear axle, front axle, suspension, steering, brake, body, and appendices. It provides operating tips, instructions for jacking and hoisting the vehicles
Hyundai HLF202530(C)-5 Forklift Truck Service Repair Manual.pdfdksmiekddmdmd
This document provides instructions for disassembly and assembly of a steering unit. The key steps are:
1) Disassemble by removing the end cover, gearwheel set, cardan shaft, distributor plate, check valve parts, bearing races, cross pin, and seals.
2) Assemble by installing the seals, bearing races, cross pin, spool/sleeve with neutral position springs, distributor plate, cardan shaft, O-rings, and end cover. Proper positioning of parts is important for correct assembly.
3) Tightening torques are provided for reinstallation of the steering unit.
CLAAS NECTIS VE 237 2+4WD (Type T14) Tractor Service Repair Manual.pdfdksmiekddmdmd
1. The document provides identification information for injector pumps and injectors used in various tractor models. It identifies the manufacturer, models, and specifications of the injector pumps and injectors.
2. The fuel injection system is described including the fuel tank, lines, filters, pump, and injectors. The operating principle and components of the injector pump are explained along with diagrams.
3. Torque settings and adjustment procedures are provided for the accelerator control and injector pump internal settings.
CLAAS NECTIS VE 217 2+4WD (Type T14) Tractor Service Repair Manual.pdfdksmiekddmdmd
1) The document provides identification information for injector pumps used on various tractor models, including the engine, number of cylinders, injector pump model, and injection sequence.
2) It describes the components and operation of the fuel injection system, including the fuel tank, lines, filter, pump, injectors and electrical components. Diagrams show the component layout and labeling.
3) Procedures are provided for checking and adjusting aspects of the system, such as the accelerator control, injector pump timing, injector pressure, and supply pressure. Removal and refitting of components like the fuel filter are also described.
CLAAS NECTIS VE 227 2+4WD (Type T14) Tractor Service Repair Manual.pdfdksmiekddmdmd
1) The document provides identification information for injector pumps used on various tractor models, including the engine, number of cylinders, injector pump model, and injection sequence.
2) It describes the components and operation of the fuel injection system, including the fuel tank, lines, filter, pump, injectors and electrical components like sensors and solenoids.
3) Checks and adjustments are described for components like the accelerator control, injector pump timing, injectors, supply pressure and removal/refitting of the fuel filter. Torque settings and identification information is also provided.
Bobcat AL440 Wheel Loader Service Repair Manual SN A01N11001 & above.pdfdksmiekddmdmd
This document provides safety information and guidelines for operating Bobcat AL275, AL350, and AL440 earthmoving machines. It outlines important safety considerations regarding the danger zone around the machine, transporting passengers, stability, overhead hazards, and more. Proper personal protective equipment is required, and only trained operators over the legal age may operate the equipment. Precautions must be taken when working near power lines, excavations, and other hazards. The machines must be safely parked when not in use.
Bobcat AL275 Wheel Loader Service Repair Manual SN A01L11001 & above.pdfdksmiekddmdmd
This document is a service manual for Bobcat AL275, AL350, and AL440 earth-moving machines. It provides safety information and pictograms for the correct operation and maintenance of these machines. Doosan purchased Bobcat from Ingersoll-Rand in 2007, and any reference to Ingersoll-Rand in the manual is historical only. The manual outlines safety notes, operating instructions, and hazards associated with these earth-moving machines. Personnel must be properly trained, wear protective equipment, and follow all safety procedures and maintenance schedules when operating or servicing these vehicles.
Bobcat AL350 Wheel Loader Service Repair Manual SN A01M11001 & above.pdfdksmiekddmdmd
This document is a service manual for Bobcat AL275, AL350, and AL440 earth-moving machines. It provides safety information and pictograms for the correct operation and maintenance of these machines. Doosan purchased Bobcat from Ingersoll-Rand in 2007, and any reference to Ingersoll-Rand in the manual is historical only. The manual outlines safety notes, operating instructions, and hazards associated with these earth-moving machines. Personnel must be properly trained, wear protective equipment, and not enter danger zones during operation to safely use this equipment.
CLAAS CELTIS 456-426 RX (Type A07) Tractor Service Repair Manual.pdfdksmiekddmdmd
This document provides technical specifications and descriptions for engine components of a Celtis engine, including:
- The cylinder head design with cross-flow inlet ducts and cast letter identifying the model.
- Valve components like guides, seals, and rotators to improve lubrication and cleaning.
- Schematics of the air intake and cooling systems showing components like the turbocharger, intercooler, and thermostat.
- Dimensions and tolerances for parts like the cylinder head, valves, and rocker shaft.
- Procedures for checking the turbocharger pressure and inspecting the cylinder head gasket for failures.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Celtis – 09.2007 – GB
A.2
First line (1): Serial number (13 characters)
Second line (2): Engine type
Tractor prior to May 2005 Tractor after May 2005
CD Engine built at the Saran factory CD Engine built at the Saran factory
4 4 cylinders 4 4 cylinders
O45 4,5 litres capacity O45 4,5 litres capacity
D Normally aspirated engine B Uncertified engine
T Turbo-charged engine C Tier 1 engine (will be followed by
the letter E then F when the
counter reaches 999999)
H Turbo-charged engine with
intercooler
G Tier 2 engine (will be followed by
the letter J then K when the
counter reaches 999999)
5 Tier 1 engine 123456 Number within the series
7 Tier 2 engine
12345 Number within the series
4 See above
045
T
RT RENAULT Agriculture application
52 Application issue
3. Celtis – 09.2007 – GB A.3
Inlet and exhaust
Technical description
Cylinder head
131msm00
This can be identified by: The cross-flow design.
Inlet ducts have been redesigned to increase turbulence in the cylinders SWIRL, and hence
improve air/fuel mixing.
A cast letter (H) in the inlet port identifies the model of cylinder head.
The cylinder head now incorporates a housing for the direct mounting of the thermostat.
The cylinder head gasket is specific.
It has a compressed graphite film on both surfaces.
H
4. Celtis – 09.2007 – GB
A.4
Valves
The valve guides are machined directly in the cylinder head. A helicoidal open groove improves
lubrication between the guide and valve. An "umbrella" type seal (D) allows the passage of a
controlled quantity of oil to provide lubrication for the valve stem.
Each valve is fitted with a rotator (B) ensuring a rotation of 2° each time the valve operates. The
contact surface between the valve head and the seat insert is thus always clean.
A – Collets.
B – Valve rotator.
C – Spring.
D – Umbrella seal.
131hsm10
A
B
C
D
5. Celtis – 09.2007 – GB A.5
Schematic diagram
Air circulation
141msm00
J
I
H
G
F
E
K
D
B
C
A
L
t°
t°
M
6. Celtis – 09.2007 – GB
A.6
A – Filter.
B – Filter blockage thermal switch.
C – Pneumatic compressor.
D – Turbocharger.
E – Intercooler.
F – Turbocharger pressure sensor (according
to model).
G – Air temperature thermistance.
H – Pre-heat flange.
I – Pre-heat relay.
J – Instrument panel.
K – Intake/exhaust.
L – Particulate rebreathing.
M – Check valve.
7. Celtis – 09.2007 – GB A.7
Technical specifications
Pre-heating
– Mechanical injection:
Pre-heating is activated by holding the key at position III on the master switch. The pre-heat
warning light illuminates.
Maximum pre-heat duration is 20 seconds (Instrument panel time delay).
A 1 200 W heater is fitted between the manifold and the intake pipe.
– Electronic injection:
Both the pre-heating and the illumination of the instrument panel warning light are controlled by
the engine ECU.
Particulate rebreathing
Particulate rebreathing is achieved by a duct subject to a venturi effect between the exhaust pipe
and the air filter.
DIMENSIONS
Cylinder head
130hsm00
A.
Minimum acceptable cylinder head thickness 104,87 mm
Maximum acceptable cylinder head thickness 105,13 mm
Maximum acceptable cylinder head rework
Minimum cylinder head thickness after rework
0,73 mm
104,11 mm
B.
Cylinder head flatness over entire length 0,08 mm
B
A
8. Celtis – 09.2007 – GB
A.8
Valves
131hsm00
INTAKE EXHAUST
C. G.
Minimum diameter of valve stem 7,864 mm Minimum diameter of valve stem 7,848 mm
Maximum diameter of valve stem 7,884 mm Maximum diameter of valve stem 7,874 mm
D. H.
Minimum clearance between stem
and guide
0,05 mm Minimum clearance between
stem and guide
0,05 mm
Maximum clearance between stem
and guide
0,10 mm Maximum clearance between
stem and guide
0,10 mm
Wear limit 0,15 mm Wear limit 0,15 mm
E. I.
Minimum valve withdrawal 0,61 mm Minimum valve withdrawal 1,22 mm
Maximum valve withdrawal 1,11 mm Maximum valve withdrawal 1,72 mm
Wear limit 1,63 mm Wear limit 2,26 mm
F. J.
Minimum diameter of valve head 46,47 mm Minimum diameter of valve head 42,37 mm
Minimum diameter of valve head 46,73 mm Minimum diameter of valve head 42,63 mm
H
G
I
D
E
F
C
J
10. Celtis – 09.2007 – GB
A.10
A.
Uncompressed length 54 mm
Length compressed to 24 daN 46 mm
Length compressed to 68 daN 34,5 mm
11. Celtis – 09.2007 – GB A.11
Turbocharger
165hsm00
Type of turbocharger CZ
Normal turbocharger pressure at full load
nominal speed
0,83 bar
12. Celtis – 09.2007 – GB
A.12
Check of valve lift
Note: Measuring valve lift enables any wear in the cam to
be detected.
– Fit the flywheel rotating tool 60 05 005 501
in (A).
– Using tool No. 60 05 005 501 turn the
flywheel in its normal direction (clockwise
when viewed from the water pump) until piston
No. (1) (at the front) is at top dead centre
(TDC) of its compression stroke.
– Fit the lock pin n° 60 05 005 576 in (B).
– Eliminate the clearance between the rocker
arm and the valve stems on exhaust valves
n° 1 - 3 and inlet valves n° 1 - 2.
– Place a dial gauge on the valve spring cup or
on the valve cap and then set to 0.
– Remove the lock pin, turn the engine, and
observe the dial gauge up to the point of
maximum valve opening.
131msm13
– Measure valve lift and compare it with the
values mentioned in "Dimensional
specifications".
– Turn the engine by a full revolution 360°. Lock
the engine at TDC on the compression stroke
for piston (4).
– Eliminate the clearance between the rocker
arm and the valve stems on exhaust valves
n° 2 - 4 and inlet valves n° 3 - 4.
– If the specifications are not followed, remove
and check the camshaft condition.
– Place a dial gauge on the valve spring cup or
on the valve cap and then set to 0.
– Measure valve lift and compare it with the
values mentioned in "Dimensional
specifications"..
– If the lift of one or several valves is not within
specifications, remove and inspect the entire
valve set and camshaft.
131msm02
B
A
13. Celtis – 09.2007 – GB A.13
Head gasket failure - investigation procedure
Preliminary checks
Three types of seal failures can occur:
– Combustion gas faulty sealing.
– Cooling system faulty sealing.
– Lubrication system faulty sealing.
A – Combustion gas sealing surface
B – Oil sealing surfaces
C – Coolant sealing surfaces
135msm03
A B C
14. Celtis – 09.2007 – GB
A.14
Visual inspection to be carried out before intervention on the cylinder head gasket:
Pressurized test of the cooling system:
– Presence of oil or coolant on the seal face or
adjacent surfaces.
– Seal displaced in respect of its normal
position.
– Discoloration or presence of soot caused by a
combustion gas leak
– Leak on the radiators (oil and water), the
tank, overflow, or pipe hoses.
– Coolant leaking at the water pump bleed
hole.
– Presence of coolant on the cylinder head
gasket.
– Presence of coolant in the crankcase.
– Insufficient coolant level.
– High oil level.
– Presence of cooling liquid in the engine
breather (A).
131hsm16
Before the test, warm the engine.
Let the engine cool down, and remove the
radiator cap cautiously.
If no leak is visible, but if pressure drops, there
may be an internal coolant leak or an internal
leak in the seal between the block and the
cylinder head.
131hsm15
A
0,7 bar
15. Celtis – 09.2007 – GB A.15
Combustion gas sealing
Symptoms:
– Loss of power.
– Irregular engine running.
– White smoke at the exhaust pipe.
– Air bubbles in the water radiator or the overflow tank.
– Cooling fluid leak from overflow pipe.
– Engine overheating.
– Loss of heating in driver's cab.
– Coolant in a cylinder.
– Coolant in the crankcase oil.
– Insufficient coolant level.
Possible causes:
– Cracks, folds in the seal surfaces.
– Damages, punctures in the elastomer ribs.
– Cracks, folds in the seal surfaces. O-ring damaged or missing at the push rod oil orifice.
– Excessive liner protrusion.
– Excessive difference in liner protrusion between the cylinders.
– Insufficient tightening torque.
– Distorted, damaged, or irregular engine block surface.
– Distorted, damaged, or irregular cylinder head surface.
– Oil or fluid overheating.
IMPORTANT: Oil cooling failures can cause the presence of oil in the cooling fluid.
16. Celtis – 09.2007 – GB
A.16
Coolant sealing
Symptoms:
– Coolant leaking through the cylinder head gasket.
– Coolant in the oil pan.
– Insufficient level in the tank.
– High oil level.
– Coolant leaking through the crankcase breather.
Possible causes:
– Excessive liner protrusion.
– Excessive difference in liner protrusion between the cylinders.
– Insufficient tightening torque.
– Deformed, damaged, or irregular engine block surface.
– Deformed, damaged or irregular cylinder head surface.
– Oil or coolant temperature too high.
– Cylinder head gasket surface deformed or cracked.
– Elastomer parts of cylinder head gasket damaged or cracked.
Lubrication system sealing
Symptoms:
– Oil leaking through the cylinder head gasket.
– Oil in the coolant.
– Insufficient oil level in the crankcase.
– Insufficient rocker lubrication (abnormal noises).
Possible causes:
– Excessive liner protrusion.
– Excessive difference in liner protrusion between the cylinders.
– Insufficient tightening torque.
– Deformed, damaged, or irregular engine block surface.
– Deformed, damaged or irregular cylinder head surface.
– Oil or coolant temperature too high.
– Cylinder head gasket surface deformed or cracked.
– Elastomer parts of cylinder head gasket damaged or cracked.
– O-rings damaged in the oil passages to the rockers.
IMPORTANT: Oil cooling failures can cause the presence of oil in the cooling fluid.
17. Celtis – 09.2007 – GB A.17
Checking the turbocharger pressure
– Observe the pressure gauge.
The lift pressure should be, when the engine is running at full load and reaches nominal speed:
If the pressure is too low, check the following points:
– Air filter clogging.
– Leak at the intake circuit, between the turbocharger and cylinder head.
– Faulty turbocharger.
– Remove the plug (1) or (2).
– Install the pressure gauge n° 60 05 005 521
– Before checking, run the engine.
101msm50
4045 TRT 77 engine 0,52 bar
4045 TRT 78 engine 0,60 bar
4045 TRT 72 engine 0,76 bar
1
2
18. Celtis – 09.2007 – GB
A.18
Turbo checks
Radial shaft play
Axial shaft play
– Fit on the turbocharger a comparator fitted
onto a support with a graduated extension,
and fit the graduated extension on the shaft of
the compressor, by passing it through the
lubrication orifice.
– Push and pull alternately the compressor
shaft.
– With equal pressure applied to both ends of
the shaft, the clearance should not exceed the
values indicated in the chapter "Dimensional
specifications".
251msm27
– Using a comparator contacting the shaft,
measure axial clearance.
– Move the shaft axially by hand in both
directions and compare the value read with
the values specified in the chapter
"Dimensional specifications".
251msm18
19. Celtis – 09.2007 – GB A.19
Reconditioning the turbocharger
IMPORTANT: It is difficult to recondition a turbocharger without the tools and training required: do not totally
disassemble a turbocharger. If a turbo is found to be faulty when checked, replace it.
Note: When refitting, use the recommended torque settings.
IMPORTANT: When refitting, oil the turbo bearings to ensure lubrication on engine start-up.
167msm00
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. Celtis – 09.2007 – GB A.21
A – Water pump.
B – Coolant passage adaptor.
C – Oil cooler drain plug.
D – Oil cooler plates.
E – Cooling fluid passage.
F – Cooling fluid envelope.
G – Passages in the upper part of the block.
H – Passages.
I – Thermostat.
J – Water manifold/thermostat housing.
L – Bypass circuit.
M – Towards the radiator upper tank.
N – Drain plug.
O – Water pump suction side.
P – High temperature cooling fluid.
Q – Low temperature cooling fluid.
R – Cabin heater valve.
S – Cabin heater radiator.
T – Engine management thermistance.
U – Instrument panel thermistance (depending
on the model).
V – Heat exchanger.
W – Expansion bottle.
23. Celtis – 09.2007 – GB
A.22
Schematic diagram
Cooling system
221msm05
x – Depending on installation.
t˚
t˚
t˚
O
A D
J
E
G
I
T
R
S
M
V
X
W
U
F
L
H
24. Celtis – 09.2007 – GB A.23
Technical specifications
Thermostat
The thermostat sits within the cylinder head under the water housing. Part of the coolant flow is
diverted to the water pump via a steel tube. The temperature is regulated between 82 and 95°C.
A – Coolant temperature probe
251msm01
During filling, bleed the system by loosening the
temperature probe or the plug (depending on
installation) at position (A).
251msm02
A
A
25. Celtis – 09.2007 – GB
A.24
Water pump
Degraded modes
Coolant temperature too high
First check coolant quality and level. Check for leaks from external engine system components.
The water pump is fitted under the accessory
gear train cover and uses the cavity in the cover
as the pump body.
251msm03
1. FAULTY
Go to 2.
GOOD
Go to 4.
2. CHECK FOR THE PRESENCE OF OIL
IN THE COOLANT HEADER TANK.
YES
Check the cylinder head and the cylinder head
gasket.
See: Head gasket failure - investigation
procedure.
NO
Go to 3.
3. DRAIN THE COOLANT.
– Refill to the correct level.
Does the problem remain ?
YES
Go to 4.
NO
Problem solved.
4. CHECK THE RADIATOR:
– Dirt ;
– Leaks ;
– Blockage.
Repair or replace the defective components.
Does the problem remain ?
YES
Go to 5.
NO
Problem solved.