The document provides instructions and safety warnings for operating various features in a vehicle, including:
- Seat belts should be worn correctly with the lap belt fitted snugly around the hips. Head restraints should be adjusted so the top is closest to the head.
- Door locks, mirrors, windows and seats should be adjusted before driving to ensure safety and comfort. Power windows can close with force so care is needed when operating them.
- Warning labels emphasize the need to follow instructions carefully to avoid injury and properly maintain the vehicle.
The document provides instructions for various vehicle features and what to do in certain situations, such as:
- How to operate the keys, doors, windows, hood, fuel tank cap, and moon roof.
- What to do if warning indicators come on, the vehicle won't start, the engine stalls, it overheats, or has a flat tire.
- Tips for the break-in period, starting the engine, general maintenance, and towing the vehicle if needed.
- Information about fuel type and tank capacity, engine oil type, and tire pressure.
The document provides an overview and instructions for various instruments and controls of a 2005 Echo hatchback vehicle, including:
- Descriptions of the instrument panel and cluster displays and indicator lights.
- Procedures for operating doors, hood, and fuel tank cap.
- Adjustment and safety instructions for front seats, including warnings about proper seating position for the driver and passenger relative to the airbags.
- Information on head restraints, seat belts, and child restraint systems.
Kia is South Korea's oldest car company. It builds high-quality, affordable vehicles and employs thousands of people. The name "Kia" means "to arise from" or "to come up out of Asia to the world." Owners of Kia vehicles will be asked questions about the company and what the name means. Kia aims to provide customers with years of driving pleasure through durable, reliable vehicles.
- The document is an owner's manual that provides important safety information and instructions for operating vehicle seats, seat belts, and airbags.
- It emphasizes the importance of wearing seat belts correctly at all times to reduce the risk of injury in an accident. Passengers should sit upright and well back in their seats.
- Instructions are provided for adjusting front and rear seats, head restraints, and seat belts. Child safety seats can be installed using the vehicle's seat belts or lower anchors depending on the model.
Manual de 2008_Saturn_Vue_Manual_en_CA.pdfMusicmanOrtiz
The document provides information about seat and restraint systems in a vehicle. It discusses head restraints, front and rear seats, safety belts, child restraints, and airbags. Key points include:
- Head restraints should be adjusted so the top is level with the top of the occupant's head to reduce neck injury risk.
- Front seats have features like manual adjustment, power adjustment, heating, and reclining. Rear seats can fold down to increase cargo space.
- Safety belts should be worn by all occupants and properly adjusted. Lap and shoulder belts provide the best protection.
- Child restraints are recommended for infants and small children. Restraints must be secured properly in rear
The document provides an overview of keys, doors, windows, trunk/hood, and theft deterrent system for a Toyota vehicle. It describes:
1) The keys work in every lock and it is recommended to always carry a spare key. Side doors can be locked manually or with the power lock switch.
2) Power windows can be operated by switches on each door and have normal and automatic modes. The window lock button prevents rear windows from opening.
3) The trunk lid can be opened inside with the lock release lever or outside with the key. The luggage security system deactivates the lever for added protection.
4) The back door of a wagon can also be locked manually or with
This document is an owner's handbook supplement for a Range Rover vehicle. It provides additional information to supplement the main owner's handbook and covers topics like the message center, child restraints, electric windows, emergency starting and towing, battery maintenance, tow bar dimensions, and declarations of conformity for radio equipment. The supplement is divided into corresponding sections from the main handbook for ease of reference.
The document provides instructions for various vehicle features and what to do in certain situations, such as:
- How to operate the keys, doors, windows, hood, fuel tank cap, and moon roof.
- What to do if warning indicators come on, the vehicle won't start, the engine stalls, it overheats, or has a flat tire.
- Tips for the break-in period, starting the engine, general maintenance, and towing the vehicle if needed.
- Information about fuel type and tank capacity, engine oil type, and tire pressure.
The document provides an overview and instructions for various instruments and controls of a 2005 Echo hatchback vehicle, including:
- Descriptions of the instrument panel and cluster displays and indicator lights.
- Procedures for operating doors, hood, and fuel tank cap.
- Adjustment and safety instructions for front seats, including warnings about proper seating position for the driver and passenger relative to the airbags.
- Information on head restraints, seat belts, and child restraint systems.
Kia is South Korea's oldest car company. It builds high-quality, affordable vehicles and employs thousands of people. The name "Kia" means "to arise from" or "to come up out of Asia to the world." Owners of Kia vehicles will be asked questions about the company and what the name means. Kia aims to provide customers with years of driving pleasure through durable, reliable vehicles.
- The document is an owner's manual that provides important safety information and instructions for operating vehicle seats, seat belts, and airbags.
- It emphasizes the importance of wearing seat belts correctly at all times to reduce the risk of injury in an accident. Passengers should sit upright and well back in their seats.
- Instructions are provided for adjusting front and rear seats, head restraints, and seat belts. Child safety seats can be installed using the vehicle's seat belts or lower anchors depending on the model.
Manual de 2008_Saturn_Vue_Manual_en_CA.pdfMusicmanOrtiz
The document provides information about seat and restraint systems in a vehicle. It discusses head restraints, front and rear seats, safety belts, child restraints, and airbags. Key points include:
- Head restraints should be adjusted so the top is level with the top of the occupant's head to reduce neck injury risk.
- Front seats have features like manual adjustment, power adjustment, heating, and reclining. Rear seats can fold down to increase cargo space.
- Safety belts should be worn by all occupants and properly adjusted. Lap and shoulder belts provide the best protection.
- Child restraints are recommended for infants and small children. Restraints must be secured properly in rear
The document provides an overview of keys, doors, windows, trunk/hood, and theft deterrent system for a Toyota vehicle. It describes:
1) The keys work in every lock and it is recommended to always carry a spare key. Side doors can be locked manually or with the power lock switch.
2) Power windows can be operated by switches on each door and have normal and automatic modes. The window lock button prevents rear windows from opening.
3) The trunk lid can be opened inside with the lock release lever or outside with the key. The luggage security system deactivates the lever for added protection.
4) The back door of a wagon can also be locked manually or with
This document is an owner's handbook supplement for a Range Rover vehicle. It provides additional information to supplement the main owner's handbook and covers topics like the message center, child restraints, electric windows, emergency starting and towing, battery maintenance, tow bar dimensions, and declarations of conformity for radio equipment. The supplement is divided into corresponding sections from the main handbook for ease of reference.
This document provides instructions for various controls and features of a 2012 Mazda2 vehicle, including:
1) Controls for manually adjusting the front seats, including height, recline, and sliding adjustments.
2) Instructions for operating the liftgate and folding the rear seats to increase cargo space.
3) An overview of the keyless entry system and functions of the retractable key.
The document provides maintenance schedules for normal and severe usage. For normal usage, it recommends inspecting and replacing items like engine oil and air filters every 7,500 miles. For severe usage, some items need inspection or replacement more frequently, like front disc brake pads inspected every 15,000 miles instead of 30,000. It also notes to refer to the owner's manual for more details on maintenance needs.
The document provides an overview of the Opel Blazer vehicle. It emphasizes that the Blazer offers advanced technology, outstanding safety, environmental compatibility, and low operating costs. It encourages the owner to read the owner's manual to familiarize themselves with the vehicle's features and operate it safely. The owner's manual contains information on instrumentation, vehicle controls, safety procedures, maintenance, and troubleshooting. It aims to increase the owner's enjoyment and expertise in operating the Blazer.
The document provides information about various features of a Mazda CX-7 vehicle, including quick tips on controls, functions, getting started, the instrument cluster, and more. It highlights unique features like the turbocharger, advanced keyless entry/start system, passenger air bag deactivation indicator, and headlight leveling switch. The summary provides operating instructions and safety warnings for key vehicle systems.
This quick reference guide provides an overview of key features for a GMC Terrain, including how to operate the instrument panel, remote keyless entry, remote start, power door locks, rear door safety locks, seat adjustments, lighting controls, liftgate, wipers, cruise control, audio system, DVD entertainment, Bluetooth, and more. Keeping this guide with the owner's manual provides easy access to information about vehicle features.
The document provides information about seat adjustments, safety belts, and airbags in a vehicle. It discusses manually and power adjusting front seats, reclining seatbacks, removing and installing rear seats, and using safety belts properly. It emphasizes that safety belts should be worn by all passengers and outlines important safety information about airbags working together with safety belts.
The document provides an overview of the Moto Guzzi V85 TT vehicle. It contains instructions for safe and proper use of the vehicle. Key features described include the dashboard, instrument panel, lighting unit, digital display, switches, buttons and systems such as the immobilizer, ABS and traction control. The document emphasizes safety, including warnings about carbon monoxide, fuel, hot components, and electrical and mechanical hazards.
2005 yamaha xg250 xg 250 tricker service repair manualfsjekdmemmd
This service manual provides specifications, maintenance procedures, and troubleshooting information for the Yamaha XG250 motorcycle. It is intended for use by Yamaha dealers and qualified mechanics. The manual contains information on periodic maintenance of emission control systems and identifies important sections using symbols. It also lists special tools required for complete and accurate service work.
2005 YAMAHA XG250 XG 250 TRICKER Service Repair Manual西 库
This is the Highly Detailed factory service repair manual for the2005 YAMAHA XG250 XG 250 TRICKER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2005 YAMAHA XG250 XG 250 TRICKER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Specifications
Periodic Inspection and Adjustment
Chassis
Engine
Fuel System
Electrical System
Troubleshooting
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2005 YAMAHA XG250 XG 250 TRICKER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
The document is the owner's manual for Subaru vehicles. It provides important information to owners about operating and maintaining their Subaru correctly and safely. It covers proper use of seatbelts and airbags, vehicle controls and features, routine maintenance guidelines, and safety warnings. It aims to help owners understand and care for their vehicle so they can drive it safely for years.
This document is an owner's manual for several models of walk behind lawn mowers. It includes sections on safety, assembly, controls, operation, maintenance, service, storage, troubleshooting, specifications and warranty. The safety section emphasizes safe operation of the mower, such as wearing protective equipment, clearing the area of debris before mowing, avoiding slopes, and keeping children and bystanders away from the mower. The manual provides instructions on starting and using the mower, as well as maintaining and servicing the mower. It also includes troubleshooting tips and specifications for the mower models.
New holland ts6030 tractor service repair manualfjsekskemmm
This document is a service manual for tractor models TS6020, TS6030, and TS6030HC. It provides information on hydraulic, pneumatic, electrical, and electronic systems, as well as the engine, transmission, axles, brakes, steering, frame, cab controls, and hitch. Safety information is provided throughout, including proper procedures for servicing equipment and ensuring personal safety.
New holland ts6030 hc tractor service repair manualfjsekskemmm
This document is a service manual for tractor models TS6020, TS6030, and TS6030HC. It provides information on hydraulic, pneumatic, electrical, and electronic systems, as well as the engine, transmission, axles, brakes, steering, frame, cab controls, and hitch. Safety information is provided throughout regarding personal safety precautions and machine maintenance. Torque specifications are included for hydraulics and general assembly.
New holland ts6030 tractor service repair manualufuusefjjsekkm
This document provides exploded views and descriptions of components for the hydraulic system on a tractor model. It describes the primary hydraulic power system which uses a tandem gear pump to provide pressurized oil flow to operate implements and other circuits. The system includes a priority valve group containing flow control, unload and combining valves to direct oil flow as needed and protect components from overpressure. Auxiliary pumps and relief valves are also included to supply hydraulic power.
New holland ts6030 hc tractor service repair manualufuusefjjsekkm
This document provides exploded views and descriptions of components for the hydraulic system on a tractor model. It describes the primary hydraulic power system which uses a tandem gear pump to provide pressurized oil flow to operate implements and other circuits. The system includes a priority valve group containing flow control, unload and combining valves to direct oil flow as needed from the main and optional auxiliary pumps. Diagrams show the internal components of the gear pump and priority valves.
New holland ts6020 tractor service repair manualufuusefjjsekkm
This document provides exploded views and descriptions of components for the hydraulic system on a tractor model. It describes the primary hydraulic power system which uses a tandem gear pump to provide pressurized oil flow to operate implements and other circuits. The system includes a priority valve group containing flow control, unload and combining valves to direct oil as needed. Exploded views show the internal components of the gear pump, auxiliary pump, and priority/regulator valve group.
New holland ts6020 tractor service repair manualfjsekskemmm
This document is a service manual for tractor models TS6020, TS6030, and TS6030HC. It provides information on hydraulic, pneumatic, electrical, and electronic systems, as well as the engine, transmission, axles, brakes, steering, frame, cab controls, and hitch. Safety information is provided throughout, including proper procedures for servicing equipment and ensuring personal safety.
This document is an owner's manual for a Mazda vehicle. It provides information to Mazda owners about operating and maintaining their vehicles safely and properly. Some key points covered include how to use safety equipment like seat belts, how to operate vehicle controls and features, basic maintenance guidelines, what to do in emergencies, and contacting Mazda for service or support. The manual emphasizes reading it cover to cover to understand how to enjoy driving a Mazda and get the most from the vehicle.
This owner's manual provides information about operating and maintaining a Nissan vehicle. It discusses safety features like seat belts and airbags. It also covers vehicle controls, components, and systems as well as maintenance instructions. The manual emphasizes safe driving practices and following warnings to prevent accidents and injury.
This document provides instructions for various controls and features of a 2012 Mazda2 vehicle, including:
1) Controls for manually adjusting the front seats, including height, recline, and sliding adjustments.
2) Instructions for operating the liftgate and folding the rear seats to increase cargo space.
3) An overview of the keyless entry system and functions of the retractable key.
The document provides maintenance schedules for normal and severe usage. For normal usage, it recommends inspecting and replacing items like engine oil and air filters every 7,500 miles. For severe usage, some items need inspection or replacement more frequently, like front disc brake pads inspected every 15,000 miles instead of 30,000. It also notes to refer to the owner's manual for more details on maintenance needs.
The document provides an overview of the Opel Blazer vehicle. It emphasizes that the Blazer offers advanced technology, outstanding safety, environmental compatibility, and low operating costs. It encourages the owner to read the owner's manual to familiarize themselves with the vehicle's features and operate it safely. The owner's manual contains information on instrumentation, vehicle controls, safety procedures, maintenance, and troubleshooting. It aims to increase the owner's enjoyment and expertise in operating the Blazer.
The document provides information about various features of a Mazda CX-7 vehicle, including quick tips on controls, functions, getting started, the instrument cluster, and more. It highlights unique features like the turbocharger, advanced keyless entry/start system, passenger air bag deactivation indicator, and headlight leveling switch. The summary provides operating instructions and safety warnings for key vehicle systems.
This quick reference guide provides an overview of key features for a GMC Terrain, including how to operate the instrument panel, remote keyless entry, remote start, power door locks, rear door safety locks, seat adjustments, lighting controls, liftgate, wipers, cruise control, audio system, DVD entertainment, Bluetooth, and more. Keeping this guide with the owner's manual provides easy access to information about vehicle features.
The document provides information about seat adjustments, safety belts, and airbags in a vehicle. It discusses manually and power adjusting front seats, reclining seatbacks, removing and installing rear seats, and using safety belts properly. It emphasizes that safety belts should be worn by all passengers and outlines important safety information about airbags working together with safety belts.
The document provides an overview of the Moto Guzzi V85 TT vehicle. It contains instructions for safe and proper use of the vehicle. Key features described include the dashboard, instrument panel, lighting unit, digital display, switches, buttons and systems such as the immobilizer, ABS and traction control. The document emphasizes safety, including warnings about carbon monoxide, fuel, hot components, and electrical and mechanical hazards.
2005 yamaha xg250 xg 250 tricker service repair manualfsjekdmemmd
This service manual provides specifications, maintenance procedures, and troubleshooting information for the Yamaha XG250 motorcycle. It is intended for use by Yamaha dealers and qualified mechanics. The manual contains information on periodic maintenance of emission control systems and identifies important sections using symbols. It also lists special tools required for complete and accurate service work.
2005 YAMAHA XG250 XG 250 TRICKER Service Repair Manual西 库
This is the Highly Detailed factory service repair manual for the2005 YAMAHA XG250 XG 250 TRICKER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2005 YAMAHA XG250 XG 250 TRICKER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Specifications
Periodic Inspection and Adjustment
Chassis
Engine
Fuel System
Electrical System
Troubleshooting
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2005 YAMAHA XG250 XG 250 TRICKER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
The document is the owner's manual for Subaru vehicles. It provides important information to owners about operating and maintaining their Subaru correctly and safely. It covers proper use of seatbelts and airbags, vehicle controls and features, routine maintenance guidelines, and safety warnings. It aims to help owners understand and care for their vehicle so they can drive it safely for years.
This document is an owner's manual for several models of walk behind lawn mowers. It includes sections on safety, assembly, controls, operation, maintenance, service, storage, troubleshooting, specifications and warranty. The safety section emphasizes safe operation of the mower, such as wearing protective equipment, clearing the area of debris before mowing, avoiding slopes, and keeping children and bystanders away from the mower. The manual provides instructions on starting and using the mower, as well as maintaining and servicing the mower. It also includes troubleshooting tips and specifications for the mower models.
New holland ts6030 tractor service repair manualfjsekskemmm
This document is a service manual for tractor models TS6020, TS6030, and TS6030HC. It provides information on hydraulic, pneumatic, electrical, and electronic systems, as well as the engine, transmission, axles, brakes, steering, frame, cab controls, and hitch. Safety information is provided throughout, including proper procedures for servicing equipment and ensuring personal safety.
New holland ts6030 hc tractor service repair manualfjsekskemmm
This document is a service manual for tractor models TS6020, TS6030, and TS6030HC. It provides information on hydraulic, pneumatic, electrical, and electronic systems, as well as the engine, transmission, axles, brakes, steering, frame, cab controls, and hitch. Safety information is provided throughout regarding personal safety precautions and machine maintenance. Torque specifications are included for hydraulics and general assembly.
New holland ts6030 tractor service repair manualufuusefjjsekkm
This document provides exploded views and descriptions of components for the hydraulic system on a tractor model. It describes the primary hydraulic power system which uses a tandem gear pump to provide pressurized oil flow to operate implements and other circuits. The system includes a priority valve group containing flow control, unload and combining valves to direct oil flow as needed and protect components from overpressure. Auxiliary pumps and relief valves are also included to supply hydraulic power.
New holland ts6030 hc tractor service repair manualufuusefjjsekkm
This document provides exploded views and descriptions of components for the hydraulic system on a tractor model. It describes the primary hydraulic power system which uses a tandem gear pump to provide pressurized oil flow to operate implements and other circuits. The system includes a priority valve group containing flow control, unload and combining valves to direct oil flow as needed from the main and optional auxiliary pumps. Diagrams show the internal components of the gear pump and priority valves.
New holland ts6020 tractor service repair manualufuusefjjsekkm
This document provides exploded views and descriptions of components for the hydraulic system on a tractor model. It describes the primary hydraulic power system which uses a tandem gear pump to provide pressurized oil flow to operate implements and other circuits. The system includes a priority valve group containing flow control, unload and combining valves to direct oil as needed. Exploded views show the internal components of the gear pump, auxiliary pump, and priority/regulator valve group.
New holland ts6020 tractor service repair manualfjsekskemmm
This document is a service manual for tractor models TS6020, TS6030, and TS6030HC. It provides information on hydraulic, pneumatic, electrical, and electronic systems, as well as the engine, transmission, axles, brakes, steering, frame, cab controls, and hitch. Safety information is provided throughout, including proper procedures for servicing equipment and ensuring personal safety.
This document is an owner's manual for a Mazda vehicle. It provides information to Mazda owners about operating and maintaining their vehicles safely and properly. Some key points covered include how to use safety equipment like seat belts, how to operate vehicle controls and features, basic maintenance guidelines, what to do in emergencies, and contacting Mazda for service or support. The manual emphasizes reading it cover to cover to understand how to enjoy driving a Mazda and get the most from the vehicle.
This owner's manual provides information about operating and maintaining a Nissan vehicle. It discusses safety features like seat belts and airbags. It also covers vehicle controls, components, and systems as well as maintenance instructions. The manual emphasizes safe driving practices and following warnings to prevent accidents and injury.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. Please read this manual an
instructions carefully.
To emphasize special informati
WARNING, CAUTION, and
special meanings.
Information following these s
should be carefully reviewed.
IMPORTANT NOT
The instructions must be o
order to reduce the risk o
injury. Please read these w
you don't, then you or other
hurt.
WARNING
These instructions point o
service procedures or preca
must be followed to avoid da
vehicle.
Your Daewoo car or other pr
be damaged if you don't fo
instructions.
CAUTION
Notes provide special inform
makes maintenance easier o
instruction clearer.
NOTE
This manual has been prepared to acquaint you with the operation and maintenance
of your new DAEWOO and to provide important safety information. We urge you to
read it carefully and follow the recommendations to help assure the most enjoyable,
safe and trouble-free operation of your vehicle.
When it comes to service, remember that your DAEWOO dealer knows your vehicle
best and is interested in your complete satisfaction.
We would like to take this opportunity to thank you for choosing a DAEWOO product
and assure you of our continuing interest in your motoring pleasure and satisfaction.
This manual should be considered as a permanent part of your vehicle, and must remain
with the vehicle at the time of resale.
DAEWOO MOTOR CO., LTD.
INCHON, KOREA
FOREWORD
Untitled-53 10/31/2006, 12:51 PM
2
3. Please read this manual and follow its
instructions carefully.
To emphasize special information, the words
WARNING, CAUTION, and NOTE have
special meanings.
Information following these signal words
should be carefully reviewed.
IMPORTANT NOTICE
We would like to point out that non-Daewoo
Genuine parts and accessories have not
been examined and approved by Daewoo,
and in spite of continuous market product
monitoring, we cannot certify the suitability
nor the safety of such products whether
they are installed or intended for fitment in
our vehicles. Daewoo is not liable for any
damage caused by the use of non-Daewoo
Genuine parts and accessories.
The instructions must be observed in
order to reduce the risk of personal
injury. Please read these warnings; if
you don't, then you or others could be
hurt.
WARNING
These instructions point out special
service procedures or precautions that
must be followed to avoid damaging the
vehicle.
Your Daewoo car or other property can
be damaged if you don't follow these
instructions.
CAUTION
Notes provide special information which
makes maintenance easier or important
instruction clearer.
NOTE
All informations, illustrations and
specifications in this manual are based on
the latest product informations available at
the time of publication.
Daewoo reserves the right to change
specifications or design at any time without
notice and without incurring any obligation
whatsoever.
This vehicle may not comply with the
standards or regulations of other countries.
Before attempting to register this vehicle in
any other country, check all applicable
regulations and make any necessary
modifications.
This manual describes options and trim
levels available at the time of printing, and
therefore, some of the items covered may
not apply to your vehicle. If any doubt exists
about any of the options or trim levels,
please do not hesitate to contact your
Daewoo dealer for information on the latest
specifications.
* This asterisk in this manual signifies
that an item of equipemt is not included
in all vehicles (model variants, engine
options, models specific to one country,
optional equipment, etc.)
Untitled-53 10/31/2006, 12:51 PM
3
4. 1. BEFORE DRIVING YOUR CAR ........................................................................................................................... 1ñ1
2. STARTING AND OPERATING.............................................................................................................................. 2ñ1
3. INSTRUMENT AND CONTROLS ......................................................................................................................... 3ñ1
4. OTHER CONTROLS AND FEATURES................................................................................................................ 4ñ1
5. VENTILATION, HEATING AND AIR CONDITIONING* .......................................................................... 5ñ1
6. AUDIO SYSTEM* ................................................................................................................................................. 6ñ1
7. IN CASE OF EMERGENCY ................................................................................................................................. 7ñ1
8. SERVICE AND MAINTENANCE .......................................................................................................................... 8ñ1
9. VEHICLE CARE .................................................................................................................................................... 9ñ1
10. SPECIFICATION AND SERVICE DATA ............................................................................................................. 10ñ1
TABLE OF CONTENTS
Untitled-53 10/31/2006, 12:51 PM
4
6. 1ñ2
Following a few simple precautions for the
first few hundred kilometers can add to
the future performance, economy and long
life of your car.
ï Do not race the engine.
ï Drive at varying speeds, trying not to
"strain" the engine.
ï Avoid hard stops, except in
emergencies.
This will allow the brakes to bed in
properly.
ï Avoid full-throttle starts.
BEFORE ENTERING THE CAR BEFORE DRIVING OFF
BREAK-IN PERIOD
ï Adjust your seating position.
ï Adjust inside and outside mirrors.
ï Ensure that all occupants of the car
have fastened their seat belts.
ï Check the operation of the warning
lights when key is turned to "II" position.
ï Check all gauges.
ï Release the parking brake and ensure
that the brake warning light goes out.
ï Be sure you understand your car and
its equipment and how to operate it
safely.
ï Ensure that windows, outside rearview
mirrors and lights are clean, undamaged
and unobstructed.
ï Visually note inflation condition of tires.
ï Check that all lights are working.
ï Check that the area is clear if you are
about to reverse.
ï Check under the vehicle for leaks.
It is the owner's responsibility to
frequently check all lights, signaling
systems and warning indicator lights. It
is important that any malfunction is
corrected promptly to ensure the safety
of you, your passenger and other
drivers.
WARNING
7. 1ñ3
Front doors can be locked or unlocked from
outside by using the key.
To unlock, turn the key towards the rear of
the car. All doors can be locked or unlocked
from the inside by pushing down or pulling
up the door lock button located on the
window sill on each door.
KEY
Two keys are provided which fit all key
cylinders.
Keep one of the two keys as a spare.
DOOR LOCKS
All doors, except the driver's, can be locked
from the outside by pushing down the door
lock button then closing the door.
The lock button on the driver's door cannot
be pushed down when the door is open,
thus preventing the driver from being
inadvertently locked out.
However, if the door handle is raised, the
lock button on the driver's door can be
pushed down when the door is open.
If you wish to lock the driver's door without
using the key, set the button in the lock
position before closing the door. The outside
door handle must be held up while the
driver's door is being closed.
unlock
lock
unlock
lock
Be careful not to lock your keys in the
vehicle.
CAUTION
Key number plate
The key number is stamped on the key
number plate. For vehicle security, keep the
key number plate in a safe place, not in the
vehicle. You should also record the key
number in a safe place, not in the vehicle.
This deters unauthorized persons from
obtaining a duplicate key.
Before leaving the vehicle, remove the
ignition key.
WARNING
8. 1ñ4
ï To open the door from the inside,
1. Pull the door lock button up,
2. Pull the door catch.
By pressing down or pulling up the interior
lock button on the driver's door or by
turning the key as far as it will go, all doors
are locked or unlocked.
SYSTEM*
CENTRAL DOOR LOCKING
Always remove the ignition key and
lock all doors when leaving your
vehicle unattended.
NOTE
CHILD SAFETY DOOR LOCKS
When the metal latch beneath the lock on
either of the rear doors is pushed upwards,
the door cannot be opened from the inside.
Rear doors locked with the child safety
mechanism can still be opened from the
outside provided that the door lock button
is not pushed down.
latch
pull
lock
unlock
upwards
9. 1ñ5
To raise or lower the door window, rotate
the window regulator handle in the door
panel.
DOOR WINDOWS*
3 door model
The front windows can be operated by two
rocker switches on the center console
when the ignition switch is placed in
position "II".
Driver's
side switch
Passenger's
side switch
To open, pull catch and push window
glass outwards to the open position.
When closing, fold catch back to lock.
REAR QUARTER WINDOWS* POWER WINDOW SWITCHES*
10. 1ñ6
4 and 5 door models
The windows can be operated by switches
located in the driver's door armrest when
the ignition switch is in position "II".
Passenger's door window switches are
located in the armrest of each door. Push
the switch down to lower the window and
push the switch up to raise the window.
Release the switch when the window
reaches the desired position.
When the safety lock switch is pressed, the
passenger's windows cannot be operated
except by the driver.
Care must be taken when operating the
power windows. There is a risk of injury,
particularly for children, and a danger
that articles could become trapped.
Make sure that all vehicle occupants
know how to operate the windows
correctly.
If there are children on the rear seat,
press the safety lock button to isolate
the individual window switches.
Keep a close watch on the windows
when closing them. Ensure that nothing
becomes trapped in them.
Upon leaving the vehicle the driver
must remove the ignition key in order
to prevent other vehicle occupants from
operating the windows (with a potential
risk of injury).
Do not extend any portion of your body
out of the opening at any time.
WARNING
When the safety lock switch is depressed,
power is cut to the individual door window
switches. However, the driver can still
operate all the windows using the switches
in the driver's door armrest.
Safety lock switch
Passenger's
side switch
Driver's side
switch
Rear right
side switch
Rear left
side switch
11. 1ñ7
The inside mirror can be adjusted up, down
or sideways to obtain the best view.
The inside mirror has day and night
positions.
Move the knob to the night position to
reduce glare from the headlights of vehicles
behind you.
INSIDE REARVIEW MIRROR
TILTABLE STEERING WHEEL*
The steering wheel can be adjusted in four
different positions.
This steering wheel can be adjusted by
pulling with the left hand the control lever
on the side of the steering column, moving
the wheel to the desired position and then
releasing the lever. In order to provide easy
access to the vehicle, the wheel should be
moved to its uppermost position when
leaving the car.
pull
Do not put large objects on the flat area
behind the rear seat, as they may
obscure vision and could become
dangerous projectiles in the event of a
sudden stop or collisions.
WARNING
night
day
adjusting knob
Always adjust the mirror with the
selector set to the day position.
Only use the night position if it is
necessary to reduce glare from the
headlights of vehicles behind you.
Be aware that in this position you may
not be able to see some objects that
could be seen in the day position.
CAUTION
Do not adjust the tiltable steering
wheel while the vehicle is moving to
avoid losing control of the vehicle.
CAUTION
12. 1ñ8
FRONT SEAT SLIDE ADJUSTMENT
To move the seat forwards or backwards,
pull up the control lever located inboard and
under the front of the seat and hold it.
Then, slide the seat to the desired position
and release the lever.
OUTSIDE REARVIEW MIRROR
Adjust the outside rearview mirrors with
the adjusting levers so that you can see
not only each side of the road behind you
but also each side of your vehicle. This
helps you determine the location of objects
seen in the mirror.
Simply move the adjusting lever in the
desired direction to adjust the position of the
mirror.
ï Foldable mirror*
The outside rearview mirrors can be folded
flat against the side of the vehicle by
pushing it backward when driving in narrow
road or washing the vehicle, etc.
ï Break-away mirror*
The outside mirrors will be released from
their supports under heavy impact for the
safety of passengers and pedestrians. The
mirrors can be locked back into position with
a light blow of the hand at light angles to
the vehicle.
ï Convex mirror*
The outside mirror on the passenger's side
is convex if it says "OBJECTS IN MIRROR
ARE CLOSER THAN THEY APPEAR".
Use this mirror to get a wider view of the
road behind.
adjusting
lever
ï Take care when judging the size or
distance of a vehicle or other object
seen in the side convex mirror. Be
aware that objects will look smaller
and appear farther away than when
viewed in a flat mirror.
ï Use your inside rearview mirror to
determine the size and distance of
objects seen in the side convex
mirror.
ï Do not scrape ice off the mirror
face; This may damage the surface
of the glass. If ice should restrict
movement of the mirror, do not
force the mirror adjust it.
ï To remove ice, use a deicer (spray
or blower, for example), sponge or
soft cloth.
ï Be sure to adjust mirror angles
before driving.
CAUTION
Do not adjust the driver's seat while
the vehicle is moving to avoid losing
control of the vehicle.
After adjustment, rock the seat back
and forth to be sure it is securely
locked.
Make sure that the driver's seat is
properly adjusted before you start
driving.
WARNING
pull
13. 1ñ9
DRIVER'S SEAT HEIGHT
The desired seat height can be achieved by
turning the crank handle located below the
driver's seat.
ADJUSTMENT*
To adjust the seat back, lift up the lever (or
rotate the recliner) until the desired angle is
achieved.
ADJUSTMENT
FRONT SEAT RECLINING
The seat backs should always be in a
fairly upright position when driving, or
the effectiveness of the seat belts may
be reduced.
The seat belts are designed to offer
maximum protection when seat backs
are in the fully upright position.
Make sure that the reclining seat backs
are properly adjusted before you start
driving.
WARNING
To avoid excessive seat belt slack,
which reduces the effectiveness of
seat belts, make sure that the seats
are adjusted before the seat belts are
fastened.
WARNING
Do not place articles under the front
seat that may interfere with the seat
lock mechanism. Loose objects might
interfere with seat-slide mechanism.
CAUTION
lift up
turn
14. 1ñ10
TILTING BACK OF FRONT
3 door vehicles only:
For access to the rear seat area, pull up
the release lever to fold the front seat
forward.
SEATS*
REAR SEAT ARMREST*
4 door vehicles:
The pull-down rear seat armrest is located
in the center of rear seat.
HEAD RESTRAINTS
Head restraints are designed to help reduce
the risk of neck injuries.
To raise the head restraint, pull it up. To
lower it, press the lock release button on
the left side of head restraint at the seat and
push the head restraint down.
To remove the head restraint, pull it up as
far as it will go while pushing the lock
release.
To adjust the front seat head restraint, pull
it up or push it down.
To remove the head restraint, pull it up as
far as it will go while pushing the lock
release button on the left side of head
restraint at the seat.
To adjust or remove the head restraint* of
the rear seat, push the lock release lever
on the right side of head restraint rearward
and slide it up or down.
<sedan models>
<hatchback models>
Adjust the top of the head restraint so
that it is closest to the top of your ears.
After adjusting the head restraint,
make sure it is locked in position.
Do not drive with the head restraint
removed.
CAUTION
lift-up
Incorporated in the armrest is an opening
for the ski sleeve, for carrying long/thin
loads.
press
rear
seat
push
front
seat
turn
15. 1ñ11
ï Make sure that each seat belt
buckle is inserted into the proper
buckle catch. It is possible to cross
the buckle in the rear seat.
ï Do not wear your seat belt over
hard or breakable objects in your
pockets or on your clothing. If an
accident occurs, objects such as
glasses, pens, etc. under the seat
belt can cause injury.
ï Never wear the shoulder belt under
your arm nearest door. Make sure
that the shoulder portion of seat belt
is positioned midway over the
shoulderñnever across the neck.
ï Be sure the lap belt is fitted snugly
around the hips, not the waist.
ï Never use a belt for more than one
person at a time.
ï Never allow a child stand up or
kneel on the seat.
ï Never allow a child to be held in
somebody's arms while the vehicle
is moving.
ï Never let the belt system become
damaged by a door or seat.
WARNING
ï To help reduce the risk of personal
injury in collisions or sudden
maneuvers, use the safety belts
following these instructions on their
proper use, maintenance, and use
with child restraint systems.
ï Children small enough for child
restraints (as indicated on the label
of such restraints) should always be
transported in them. Accident
statistics indicate children are safer
when properly restrained in the rear
seat rather than in the front seat.
Accordingly, a child restraint
system should be placed in the rear
seat.
ï Children who have outgrown child
restraint systems should sit in the
rear seat and be restrained with the
seat belt. If child's seating position
has a shoulder belt which is on or
very close to the face or neck,
move the child close to the center
of the vehicle, slightly inboard of the
shoulder belt, or move the child to
a position without a shoulder belt if
possible.
WARNING
SEAT BELT PRECAUTIONS
To protect you and your passengers in the
event of an accident, it is recommended that
the seat belts be worn by all occupants
whilst the vehicle is in use. Seat belts should
be worn correctly.
Rear passengers not wearing seat belts are
a danger to the driver and front passenger
in the event of an accident.
The seat belts are designed to be used by
only one person at a time: they are not
suitable for use by children below 6 years
of age. Suitable child seats/booster
cushions should be fitted.
It is recommended that pregnant
women should wear a lap-shoulder
belt properly if at all possible. This will
reduce the likelihood of injury to both
the woman and the unborn child. The
lap belts should be worn as low as
possible throughout the pregnancy.
WARNING
If the belt locks when being pulled out,
rewind it completely in the retractor,
then pull it out to the desired length.
NOTE
16. 1ñ12
Each Daewoo vehicle is equipped with three
point seat belts with automatic retractors,
allowing freedom of body movement when
driving at even, constant speeds, although
the spring-tensioned belts are always a
snug fit.
This type of belt requires no length
adjustment. Once worn, the belt adjusts
itself to the movement of wearer, but in the
event of a sudden or strong shock, the belt
automatically locks to restrain the wearer's
body.
THREE POINT SEAT BELT
WARNING
ï Seat belts should be adjusted as
firmly as possible, consistent with
comfort, to provide the protection
for which they have been designed.
A slack belt will greatly reduce the
protection afforded to the wearer.
ï Care should be taken to avoid
contamination of the webbing with
polishes, oils and chemicals, and
particularly battery acid. Cleaning
may safely be carried out using
mild soap and water. The belt
should be replaced if webbing
becomes frayed, contaminated or
damaged.
ï Periodically inspect seat belt
assemblies for excessive wear and
damage. It is essential to replace
the entire seat belt assembly after
it has been worn in a severe
impact, even if damage to the
assembly is not obvious.
ï Never wear the belts with straps
twisted or with a buckle release
button facing downward or inward.
ï Do not put anything into the opening
where the safety belt passes
through the trim panel. This may
jam the retractor or damage the
belt.
ï The seat belt will provide
maximum protection for its wearer
if the recliner seat back is placed
in fully upright position. When the
seat back is reclined, there is
greater risk that the passenger will
slide under the belt, especially in
a forward impact accident, and
may be injured by the belt or by
striking the instrument panel or
seat backs.
ï No modifications or additions
should be made by the user which
will either prevent the seat belt
adjusting devices from operating to
remove slack, or prevent the seat
belt assembly from being adjusted
to remove slack.
WARNING
17. 1ñ13
SEAT BELT HEIGHT ADJUSTOR*
On seat belts with a height-adjustable upper
anchorage point: pull belt out, depress the
area indicated by an arrow and adjust the
height.
This is particularly important if a smaller
person has previously selected a lower
position.
Too high a position can impair comfort.
USING THE BELT
Pull the belt evenly out of the retractor and
guide it across the body, making certain that
it is not twisted.
Insert the metal latch plate c into the
buckle d.
To remove the belt, depress the red push-
button on the buckle. The belt will retract
automatically.
If the belt locks when being pulled out,
rewind it completely in the retractor,
then pull it out to the desired length.
NOTE
Both arms should not be under or over
the shoulder belt. Rather, one should
be over and the other under.
Do not wear the shoulder portion of
seat belt under the arm. Make sure
that the shoulder portion of seat belt
is positioned midway over the
shoulderñnever across the neck, and
the lap portion of the belt is fitted
snugly around the hips, not the waist.
WARNING
Always be sure that the belt is
positioned across the shoulder, as
close to your neck as possible and not
on your upper arm or neck. Failure to
do so could reduce the amount of
protection in an accident and increase
the chance of injury.
CAUTION
press
press
18. 1ñ14
LAP BELT
A lap belt is installed in the center of the
rear seat.
Insert the tongue into the buckle until it
locks.
To lengthen, hold the tongue at right angles
to the belt and pull on the belt. To shorten,
pull the free end of the belt away from the
tongue, then pull the belt clip to take up the
slack.
CARE OF BELTS
Always keep the seat belts clean and dry.
Clean only with a mild soap solution or
lukewarm water.
Do not bleach or dye belts since this may
severely weaken them. Make sure that the
belt is not damaged or trapped by sharp
edged objects.
Periodically inspect all parts of the belts and
have damaged parts replaced. A belt which
has been overstretched in an accident must
be replaced by a new one.
Do not perform any alterations to your
vehicle's belt system.
All seat belt assemblies, including
retractors and attaching harness,
should be inspected after any
collision. We recommend that all seat
belt assemblies in use during a
collision be replaced unless the
collision was minor and the seat belts
show no damage and continue to
operate properly. Seat belt
assemblies not in use during a
collision should also be inspected and
replaced if damage or improper
operation is noted.
WARNING
The seat belt warning chime will sound for
about 4 to 8 seconds when the ignition
switch is placed in the "II" position unless
the driver's seat belt is securely fastened.
SEAT BELT WARNING CHIME
Position the lap belt low on the hips.
To remove the belt, depress the red button
on the buckle.
Never wear the lap belt across your
abdomen. During accidents it can
press sharply against abdomen and
increase the risk of injury.
Be sure that the lap belt is fitted
snugly around the hips, not on the
waist.
CAUTION
INSERT to fasten
PRESS to unfasten
PULL to
lengthen
Belt clip
PULL
PULL
19. 1ñ15
Child restraint installation
Your vehicle has been designed to
accommodate a child restraint on the rear
seat. When using a child restraint, read the
Installation Instructions supplied with the
child restraint and follow the directions for
fitment carefully.
When installing the child restraint, use the
correct anchor bolt. (5/16" bolt)
The anchor bolt must be engaged at least
5 full threads in the anchorage.
If you have any queries regarding the
installation of a child restraint, consult a
Daewoo Dealer.
Anchorage locations
Child restraint anchor fittings have been
installed to coincide with the three rear
seating positions as follows.
CHILD RESTRAINT
Sedan Models:
Anchorages are located at either side and
center of the shelf behind the rear seat.
They are covered with the shelf carpet and
the anchor fitting nuts are welded beneath
the shelf.
Hatchback Models:
Anchorages are located at either side and
center of the lower rear tail member.
ï Infants and small children should
never be transported unless they
are properly restrained. Restraint
systems for infants and small
children should be used. Make sure
that the system you purchase
meets applicable safety standards.
Read and follow all the directions
provided by the manufacturer.
ï A child restraint system should be
placed in the vehicle's rear seat.
ï When the child restraint system is
not in use, remove it or fasten it with
a safety belt so that it will not be
thrown forward in the case of a
sudden stop or accident.
Under all circumstances the anchor
bolt must be engaged at least 5 full
threads in the anchorage.
ï Children could be endangered in a
crash if their child restraints are not
properly secured in the vehicle.
(Continued)
WARNING
20. 1ñ16
DRIVER'S AIR BAG*
The air bag is stored in the center pad of
the steering wheel.
The air bag Supplementary Restraint
System (SRS) helps protect the driver's
head and chest against injuries in the event
of a collision.
The air bag system activates during severe
collisions which are either frontal or when
the impact angle is up to 30∞ from straight
ahead.
The air bag inflates within milliseconds
during a crash and forms a safety cushion
for the driver.
After the air bag completely inflates, it
immediately deflates so that it does not
interfere with the driver's visibility or ability
to steer and operate other controls.
The air bag inflates with considerable force
and speed. It is therefore important that the
driver's seat and seat back should be
correctly adjusted, for the air bag to be fully
effective. The driver's seat should be
adjusted so that the steering wheel can be
reached with the arms slightly angled.
When the air bag inflates, an operating
noise may be heard and a small amount of
smoke-like gas will be released. The gas is
harmless and does not indicate that there
is a fire.
ï Child restraint anchorages are
designed to withstand only those
loads imposed by correctly fitted
child restraints. Under no
circumstances are they to be used
for adult seat belts, harnesses or for
attaching other items or equipment
to the vehicle.
ï If child restraint anchor bolt is
removed from the shelf, the hole
must be effectively sealed with
another suitable bolt to prevent
exhaust gases entering the vehicle
interior.
WARNING
3
0
∞
3
0
∞
21. 1ñ17
WARNING
ï Repairs to the steering wheel,
steering column and air bag system
must be carried out by only a
Daewoo Dealer or Daewoo
Authorized Service Operation.
Injuries may result if the air bag is
triggered inadvertently.
ï Do not stick anything on the
steering wheel and instrument
panel or cover them with other
materials. Clean them only with a
dry or a damp cloth. Do not use any
aggressive cleaning agents.
ï The air bag system must only be
disposed of by a Daewoo Dealer or
Daewoo Authorized Service
Operation.
ï The air bag system is designed only
as a supplement to the seat belt.
Seat belt must always be worn and
a sufficient distance kept between
the driver and the driving wheel.
WARNING
ï The air bag system will not be
triggered in the event of rear
impact, side impacts, rollovers or
minor frontal collisions. The seat
belts must therefore always be
worn. The air bag system serves to
supplement the seat belt.
ï Never affix anything to or over the
center of the steering wheel, as it
could cause injury when the air bag
is triggered.
ï Do not perform any alterations on
the components of the air bag
system. The system can be
triggered abruptly if it is treated
improperly.
ï The steering wheel and instrument
panel must only be removed by
Daewoo Dealer or Daewoo
Authorized Service Operation.
ï The air bag can be triggered only
once. It must then be replaced by
only a Daewoo Dealer or Daewoo
Authorized Service Operation.
23. 2ñ2
IGNITIONSWITC
OFF
The engine can be turned
locking the steering wheel.
LOCK
The steering is locked by
the key. Rotate the steer
until lock is engaged.
For easier key operat
unlocking, move the stee
from right to left and turn
the "I" position.
FUELRECOMMENDATIONS
Commercially available high-quality fuels are
suitable. Fuel quality has a decisive
influence on the power output, driveability
and life of the engine. The additives
contained in the fuel play an important role
in this connection. You should therefore
use only highñquality fuels containing
additives.
Fuel with too low an octane number can
cause pre-ignition of detonation. Daewoo
cannot be held liable for resultant damage.
Fuel with a higher octane number may be
used.
The larger nozzle used with leaded fuel at
service stations cannot be inserted into the
fuel tank filler neck on vehicles which must
be operated on unleaded fuel only, to avoid
accidental use of leaded fuel.
The warranty Policy will not cover
damage of the fuel system and any
performance problems that are caused
by the use of methanol or fuel
containing methanol.
CAUTION
Do not Use Methanol
Fuels containing methanol (wood alcohol)
should not be used in your Daewoo. This
type of fuel can reduce vehicle
performance and damage components of
the fuel system.
Operation in Foreign Countries
If you are going to drive your Daewoo in
another country, be sure to:
ï Observe all regulations regarding
registration and insurance.
ï Check that a suitable fuel is available.
Untitled-50 10/31/2006, 12:53 PM
2
24. 2ñ3
IGNITIONSWITCH
OFF
The engine can be turned off without
locking the steering wheel.
ON
This position turns on the ignition
system and the electrical accessories.
ï Never remove the key while driving.
If the key is removed, the steering
wheel will lock. This may cause the
driver to lose control of the vehicle
and could result in serious vehicle
damage or personal injury.
ï Never turn the key to "B" or "I"
position when the car is moving.
WARNING
LOCK
The steering is locked by removing
the key. Rotate the steering wheel
until lock is engaged.
For easier key operation when
unlocking, move the steering gently
from right to left and turn the key to
the "I" position.
START
This position activates the starter
motor, starting the engine.
Release the key when the engine
starts, and it will be returned to the "II"
position automatically.
Untitled-50 10/31/2006, 12:53 PM
3
25. 2ñ4
4. Warm-up
Allow the engine to idle fo
seconds after starting
moderate speed for a sh
first, especially in cold we
NOTE
If the engine has becom
during starting, slowly de
accelerator pedal fully, hol
position and start the engin
Extended high speed idling
or more) could produce an
exhaust system temperatur
damage your vehicle.
CAUTION
BEFORESTARTINGTHEENGINE STARTINGTHEENGINE
1. Apply the parking brake.
2. Manual transmission:
Move the gearshift lever to "N" (Neutral)
and depress the clutch pedal to the
floor while cranking the engine.
pull
Automatic transmission* :
Move the selector lever to "P"(Park) or
"N"(Neutral), although "P" is preferred.
The starter is designed not to operate
if the selector lever is in one of the
driving positions.
3. Crank the engine without touching the
accelerator pedal by turning the
ignition key to the "III" start position.
Release the key when the engine
starts.
If the engine starts, but fails to run,
repeat the above procedure.
ï Make sure the area around the
vehicle is clear.
ï The maintenance items in this manual
should be checked periodically, e.g.,
each time you check the engine oil.
ï Check that all the windows and lights
are clean.
ï Visually inspect the tires for their
appearance and condition. Also check
the tire pressures for proper inflation.
ï Position seat and adjust head restraints.
ï Adjust inside and outside mirrors.
ï Fasten your seat belts and ask all
passengers to do likewise.
ï Check the operation of the warning
lights when the key is turned to the "II"
position.
Do not operate the starter for more than
15 seconds at a time. If the engine does
not start, wait 10 seconds before
cranking again, otherwise the starter
motor could be damaged.
CAUTION
neutral
Untitled-50 10/31/2006, 12:53 PM
4
26. 2ñ5
4. Warm-up
Allow the engine to idle for at least 30
seconds after starting. Drive at
moderate speed for a short distance
first, especially in cold weather.
NOTE
If the engine has become flooded
during starting, slowly depress the
accelerator pedal fully, hold it in this
position and start the engine.
Extended high speed idling (5 minutes
or more) could produce an excessive
exhaust system temperature that can
damage your vehicle.
CAUTION
DRIVINGWITHAMANUAL
TRANSMISSION
To avoid possible damage to the clutch,
do not shift to 1(first) when moving in
excess of 16 km/h.
CAUTION
NOTE
ï Do not rest your foot on the clutch
pedal while driving. This may
cause clutch damage.
ï Stop your vehicle completely before
shifting into reverse.
ï To select reverse, be sure to lift
the reverse knob before shifting
into reverse.
To change gears, fully depress the clutch
pedal. Then move the gearshift lever. After
shifting, release the clutch slowly.
reverse knob
Untitled-50 10/31/2006, 12:53 PM
5
27. 2ñ6
Selector lever positions P, R
P
= Park, with the front wheel
be selected only with
stationary and the parking
R= Reverse. To be engaged o
vehicle stationary.
N= Neutral.
DriverangeD
D= The drive position for no
conditions in first to fourth ge
Fourth gear (the overdrive ge
engine speed, fuel consump
engine noise level.
After the engine has been sta
selected, the economy driving
is always operative.
Drive range 3
3= The drive position for drivin
in first, second and third gea
The transmission remains in th
at high speeds. Do not select "
maximum permissible speed f
DRIVINGWITHA4-SPEED
Starting the car
ï After starting the engine, fully depress
the foot brake pedal before shifting the
selector lever to the "D", "R", "3", "2"
or "1" position. Be sure the vehicle is
fully stopped before attempting to shift
the selector lever into "R" or "P".
1. Keep the foot brake pedal depressed
and shift into a driving gear.
2. Release the parking brake and foot
brake. Depressing the accelerator pedal
slowly will gradually set the vehicle in
motion.
Always depress the brake pedal while
shifting from "P" (Park) or "N" (Neutral)
to a forward or reverse gear, to help
prevent the vehicle from moving
unexpectedly when you shift
WARNING
Selector lever lock
Push the release button located on the side
of the selector grip when engaging "R"
(Reverse) and "P" (Park) and shifting from
"D" (Drive) to "3", "3" to "2" and "2" to "1" as
indicated by the black arrow " ".
The selector lever can be shifted freely into
any positions indicated by the white arrow
" ".
AUTOMATICTRANSMISSION*
release
button
Don't try to shift to P (Park) if your
vehicle is moving. If you do, you could
damage the transaxle. Shift to P (Park)
only when your vehicle is stopped.
CAUTION
The automatic transmission (4T40-E) in
your Daewoo vehicle is an electronically
controlled four speed transmission. The 4th
gear is an overdrive function.
The position of the selector lever is
indicated on the left side of the selector
lever or the automatic transmission selector
position indicator in the instrument panel.
P R N D 3 2 1
:pushthe
button
:Donot
pushthebutton
Untitled-50 10/31/2006, 12:53 PM
6
28. 2ñ7
Drive range 2
2= The drive position for first and second
gear, e.g. on winding mountain roads: the
transmission does not shift into third and
forth gear.
Drive range 1
1= The drive position for maximum braking
effect, e.g. when driving down severe
gradients; the transmission does not shift
beyond first gear.
Selector lever positions P, R and N
P
= Park, with the front wheels locked. To
be selected only with the vehicle
stationary and the parking brake on.
R= Reverse. To be engaged only with the
vehicle stationary.
N= Neutral.
DriverangeD
D= The drive position for normal driving
conditions in first to fourth gear.
Fourth gear (the overdrive gear) reduces
engine speed, fuel consumption and the
engine noise level.
After the engine has been started and "D"
selected, the economy driving programme
is always operative.
Drive range 3
3= The drive position for driving conditions
in first, second and third gear.
The transmission remains in third gear even
at high speeds. Do not select "3" above the
maximum permissible speed for this range.
To help prevent transmission damage:
ï Do not depress the accelerator
pedal while shifting from "P" or "N"
to "R", "D", "3", "2", or "1". Always
depress the brake pedal until
shifting is completed.
ï Do not drive in "2" for more than
8 km or at speeds over 90 km/h ,
or you can damage your transaxle.
Use "D" as much as possible.
ï Never shift to "P" or "R" while the
vehicle is in motion.
ï When stopping the vehicle on an
uphill gradient, do not hold the
vehicle by depressing the
accelerator pedal. The foot brakes
should be used for this purpose.
CAUTION
ï Do not use the P (Park) position in
place of the parking brake.
ï Turn off the ignition when you leave
the vehicle, even momentarily. Never
leave the vehicle unattended while
the engine is running. Unexpected
and possibly sudden vehicle
movement may occur if these
precautions are not taken.
WARNING
Untitled-50 10/31/2006, 12:53 PM
7
29. 2ñ8
Kickdown
When the accelerator pedal i
beyond its resistance point b
speeds, the transmission shif
a lower gear. Full use is made
power for acceleration.
Engine braking
In order to utilize the engine b
when driving downhill, select
"3", "2" or, if necessary, "1" in
The braking action is most effe
range "1". If drive range "1" is
too high a speed, the transmis
in second gear until the shift
gear is reached, e.g. as
deceleration.
d
DRIVINGTIPSFOR4-SPEED
EMERGENCYOPERATION
SWITCH (4-SPEED AUTO T/M)*
POWER/ECONOMYMODES
Power mode:
For powerful acceleration or driving up
long slopes, push the power mode switch
on selector lever.
The "PWR" indicator light will come on. The
transmission shifts into the POWER driving
pattern. The transmission will shift at higher
engine revolution obtaining powerful
acceleration when passing or climbing.
Economy mode:
For normal driving.
This is the most effective and economical
mode for routine, stop-and-go or motorway
driving. The transmission will shift
automatical in this mode.
power mode
switch
If the "POWER" indicator flashes
continuously, a fault has occurred in the
TCM (Transmission Control Module) or
electronic part/sensor.
In this situation automatic shifting can be
cancelled and then gear position will be
automatically landed to 2nd gear in drive
position D, 3 and 2 as follows;
Starting the car
After starting the engine and before
shifting into a drive range, depress the
brake pedal since the vehicle will otherwise
start to "creep". Never use accelerator and
brake pedals simultaneously.
For normal driving conditions the "D"
position should be selected.
If the accelerator pedal is depressed gently
and evenly the transmission will shift into
the fuel-saving higher gears at an early
stage. The drive range needs to be
changed manually only in exceptional
cases. Select "3", "2" and "1" only when
automatic shifting up is to be avoided or if
additional use is to be made of the engine
braking effect.
Return to "D" as soon as conditions permit.
FOR 4-SPEEDAUTOMATIC T/M* AUTOMATICTRANSMISSION*
P R N D 3 2 1
Selectorlever
position
P R N 2 2 2 1
Gear
position
You must consult a Daewoo Dealer or
Daewoo Authorized Service Operations as
soon as possible when this condition
occurs. The system's integral self-
diagnosis facility allows faults to be quickly
remedied.
Untitled-50 10/31/2006, 12:53 PM
8
30. 2ñ9
Stopping the car
The selector lever can be left in the chosen
drive range with the engine running.
When stopping on gradients engage the
parking brake or depress the brake pedal.
Do not increase the engine revolutions to
ensure smooth idling while standing if a
drive range has been selected.
Switch off engine if stopping for a lengthy
period, e.g. in traffic jams or at level
crossings.
Before leaving the vehicle, apply parking
brake, then place selector lever in position
"P" and remove ignition key.
Rocking the car
If it becomes necessary to rock the car to
free it from sand, mud, snow or a hole,
move the selector lever from "D" to "R" in
a repeat pattern while simultaneously
applying light pressure to the accelerator
pedal. Do not race the engine and avoid
sudden acceleration.
This applies only to the exceptional
circumstances mentioned above.
Maneuvering the car
To maneuver the car back and forth during
attempts to park or in garage entrances
utilize the above-mentioned creeping effect.
Regulate your speed by lightly releasing the
brake pedal.
Never press the accelerator and brake
pedals simultaneously.
Kickdown
When the accelerator pedal is depressed
beyond its resistance point below certain
speeds, the transmission shifts down into
a lower gear. Full use is made of the engine
power for acceleration.
Engine braking
In order to utilize the engine braking effect
when driving downhill, select drive range
"3", "2" or, if necessary, "1" in good time.
The braking action is most effective in drive
range "1". If drive range "1" is selected at
too high a speed, the transmission remains
in second gear until the shift point for first
gear is reached, e.g. as a result of
deceleration.
depress fully
Untitled-50 10/31/2006, 12:53 PM
9
31. 2ñ10
DRIVINGWITHA3-SPEED
Engine starting
The selector lever must be in "P" or "N"
position to start the engine.
Starting the car
ï After starting the engine, fully depress
the foot brake pedal before shifting the
selector lever to the "D", "R", "2" or "1"
position. Be sure the vehicle is fully
stopped before attempting to shift the
selector lever.
1. Keep the foot brake pedal depressed
and shift into a driving gear.
Always depress the brake pedal while
shifting from "P" (Park) or "N" (Neutral)
to a forward or reverse gear, to help
prevent the vehicle from moving
unexpectedly when you shift
WARNING
Selector lever lock
Push the release knob located under the
selector grip when engaging "R" and "P"
and shifting from "D" to "2" and "2" to "1" as
indicated by the black arrow " ".
The selector lever can be shifted freely
into any positions indicated by the white
arrow " ".
AUTOMATICTRANSMISSION*
The shift lever has six positions.
P (Park) ñ For starting the engine and/or
holding the car in locked position.
R (Reverse) ñ For backing the car.
N (Neutral) ñ An alternate position for
starting engine.
D (Drive) ñ For all normal forward driving.
2 ñ For difficult driving conditions in 1st
and 2nd gear, and engine braking when
descending moderate grades.
1 ñ For extreme driving conditions in 1st
gear.
release
knob
: pull the
knob
pull
: normal
shift
P R N D 2 1
2. Release the parking brake and foot
brake, then gradually start the vehicle
with depressing the accelerator pedal
slowly .
R
D
2
1
Drive range D
D= Drive position from zero t
speed under the norm
conditions.
In range "D" the vehicle star
gear once the brake has be
and shifts automatically into
third gear. Shifting down is als
If the accelerator pedal is depr
and evenly the transaxle sh
higher gears earlier than if th
made to accelerate rapidly.
Operation of the transax
economy can thus be influ
though the system is automat
Drive range 2
2= Drive position for difficult c
first and second gear only
The vehicle will perate only
second gear. Drive range "2"
particularly suitable for j
mountinous terrain with long
gradients.
Return selector lever to "D"
conditions permit.
Untitled-50 10/31/2006, 12:53 PM
10
32. 2ñ11
Drive range 1
1= Position for extreme operating conditions
in first gear only.
The transaxle does not shift beyond first
gear. This range is for extreme operating
conditions such as driving up or down
severe gradients.
Return selector lever to "D" as soon as
conditions permit.
When driving downhill in montainous
territory, it is recommended to select drive
range "2" initially or, if necessary, drive
range "1" in order to utilize the engine
braking effect.
Drive range D
D= Drive position from zero to maximum
speed under the normal driving
conditions.
In range "D" the vehicle starts off in first
gear once the brake has been released
and shifts automatically into second and
third gear. Shifting down is also automatic.
If the accelerator pedal is depressed gently
and evenly the transaxle shifts into the
higher gears earlier than if the vehicle is
made to accelerate rapidly.
Operation of the transaxle and fuel
economy can thus be influenced even
though the system is automatic.
Drive range 2
2= Drive position for difficult conditions in
first and second gear only.
The vehicle will perate only in first and
second gear. Drive range "2" is therefore
particularly suitable for journeys in
mountinous terrain with long climbs and
gradients.
Return selector lever to "D" as soon as
conditions permit.
ï Do not use the P (Park) position in
place of the parking brake.
ï Turn off the ignition when you leave
the vehicle, even momentarily. Never
leave the vehicle unattended while
the engine is running. Unexpected
and possibly sudden vehicle
movement may occur if these
precautions are not taken.
WARNING
To help prevent transmission damage:
ï Do not depress the accelerator
pedal while shifting from "P" or "N"
to "R", "D", "2", or "1". Always
depress the brake pedal until
shifting is completed.
ï Do not drive in "2" for more than
8 km or at speeds over 90 km/h.
Use "D" as much as possible.
ï Never shift to "P" or "R" while the
vehicle is in motion.
ï When stopping the vehicle on an
uphill gradient, do not hold the
vehicle by depressing the
accelerator pedal. The foot brakes
should be used for this purpose.
CAUTION
Untitled-50 10/31/2006, 12:53 PM
11
33. 2ñ12
DRIVINGTIPSFOR3-SPEED
Starting the car
After starting the engine and before
shifting into a drive range, depress the
brake pedal since the vehicle will otherwise
start to "creep". Never use accelerator and
brake pedals simultaneously.
The automatic transmission can be almost
always maintained in drive range "D"(1st
to 3rd gear).
If the accelerator pedal is depressed gently
and evenly the transmission will shift into
the fuel-saving gears at an early stage. The
drive range needs to be changed manually
only in exceptional cases. Select "2" and
"1" only when automatic shifting up is to
be avoided or if additional use is to be made
of the engine braking effect.
Return to "D" as soon as conditions permit.
AUTOMATICTRANSMISSION* Stopping the car
The selector lever can be left in the chosen
drive range with the engine running.
When stopping on gradients, engage hand
brake or depress brake pedal. Do not
increase the engine revolutions to ensure
smooth idling while standing if a drive range
has been selected.
Switch off engine if stopping for a lengthy
period, e.g. in traffic jams or at level
crossings.
Before leaving the vehicle, apply hand
brake, then place selector lever in position
"P" and remove ignition key.
Kickdown
When the accelerator pedal is depressed
beyond its resistance point below certain
speeds, the transmission shifts down into
a lower gear. Full use is made of the engine
power for acceleration.
Engine braking
In order to utilize the engine braking effect
when driving downhill, select drive range
"2" or, if necessary, "1" in good time.
The braking action is most effective in drive
range "1". If drive range "1" is selected at
too high a speed, the transmission remains
in second gear until the shift point for first
gear is reached, e.g. as a result of
deceleration.
depress fully
R
D
2
1
Rocking the car
If it becomes necessary to ro
free it from sand, mud, snow
move the selector lever from
a repeat pattern while sim
applying light pressure to the
pedal. Do not race the engin
sudden acceleration.
This applies only to the e
circumstances mentioned abo
Maneuvering the car
To maneuver the car back and
attempts to park or in garag
utilize the above-mentione
Regulate your speed by lightly
brake pedal.
Never press the accelerato
pedals simultaneously.
Untitled-50 10/31/2006, 12:53 PM
12
34. 2ñ13
ANTI-LOCKBRAKESYSTEM*
The anti-lock brake system controls the
wheels so that they will not lock when
braking abruptly or when braking on a
slippery road. The system detects the
wheel rotation rate and electronically
controls the pressure applied to the brakes.
Slight vibration accompanied by noise
usually occurs while ABS is operating.
Such vibration and noise simply indicates
that the ABS is functioning normally.
If an abnormality occurs in the system, the
anti-lock brake system is cancelled. The
ordinary brakes will operate normally and
the ABS warning light will come on. Consult
your Daewoo Dealer as soon as possible
if this condition occures.
(ABS)
BRAKE
The regular braking system is designed for
braking performance under a wide range
of driving conditions even when the vehicle
is loaded to its full rated vehicle load
capacity.
If the brake pedal can be pressed further
than normal, it may be due to a lack of
adjustment of the rear drum brakes. To find
out if this is the case, drive backward and
forward a few times, applying the brakes
firmly when going in each direction.
Visit your Daewoo dealer if the pedal height
does not return to normal, or there is a rapid
increase in pedal travel. This could be a
sign of brake trouble.
Do not drive with your foot resting on
the brake pedal as this can cause
premature lining wear and possible
damage to the brakes.
CAUTION
Rocking the car
If it becomes necessary to rock the car to
free it from sand, mud, snow or a hole,
move the selector lever from "D" to "R" in
a repeat pattern while simultaneously
applying light pressure to the accelerator
pedal. Do not race the engine and avoid
sudden acceleration.
This applies only to the exceptional
circumstances mentioned above.
Maneuvering the car
To maneuver the car back and forth during
attempts to park or in garage entrances
utilize the above-mentioned creeping.
Regulate your speed by lightly releasing the
brake pedal.
Never press the accelerator and brake
pedals simultaneously.
Untitled-50 10/31/2006, 12:53 PM
13
35. 2ñ14
Braking with ABS
In an emergency, apply full force on the
brake and clutch pedal simultaneously.
The anti-lock brake system will be activated
immediately, allowing you to retain full
steering control of your vehicle.
We recommend that you familiarise yourself
with this braking technique. However, avoid
taking unnecessary risks.
The anti-lock brake system, although
a sophisticated device, cannot prevent
accidents resulting from careless or
dangerous driving techniques.
Ultimately the responsibility for your
safety and that of others rests in the
hands of the driver. Therefore only
through attentive and careful driving
methods can the anti-lock brake
system be fully appreciated.
WARNING
PARKING
1. Firmly apply the parking brake.
2. Manual transmission models:
When parking on a downhill gradient,
place the gearshift lever in the
"REVERSE" position. When parking on
an uphill gradient, place the gearshift
lever in the "1st" position.
Automatic transmission models:
Move the selector lever to the "P"
(PARK) position
3. Turn the ignition key to the "B" (LOCK)
position and remove the key.
4. Lock all the doors after ensuring that
the keys have not been left inside the
car.
ï Things that can burn could touch
hot exhaust parts under your
vehicle and ignite. Do not park the
vehicle over papers, leaves, dry
grass or other things that can burn.
ï Always apply the parking brake fully
before leaving your vehicle.
CAUTION
PARKINGBRAKE
To set the parking brake, pull the lever up.
To release, pull the lever up slightly, push
the button and lower.
See your Daewoo dealer if adjustment of
the parking brake is required.
pull
It is important to check the parking
brake warning light each time you start
the engine. This light will glow when the
engine is running and your parking
brake is applied. Failure to release the
parking brake will result in rapid brake
wear and damage to the braking
system.
CAUTION
(2) push
(3) lower
(1) pull
SUGGESTIONSFORM
ECONOMICALOPERA
Your car's fuel economy
dependent on your style of d
How you drive, where you
when you drive has an eff
many kilometers you can get f
fuel.
To obtain maximum fuel econo
car:
ï Start gradually and accele
ï Avoid excessive and u
idling.
ï Keep your engine properl
ï Do not race the engine.
ï Use the air conditioning
only when necessary.
ï Slow down when drivin
roads.
ï Always keep your tires in
recommended pressure f
life and optimum fuel econ
ï Keep your distance from o
to avoid sudden stops. Th
wear on brake linings a
economy as extra fuel is
accelerate back up to driv
Untitled-50 10/31/2006, 12:53 PM
14
36. 2ñ15
SUGGESTIONSFORMORE
ECONOMICALOPERATION
Your car's fuel economy is mainly
dependent on your style of driving.
How you drive, where you drive, and
when you drive has an effect on how
many kilometers you can get from a liter of
fuel.
To obtain maximum fuel economy from your
car:
ï Start gradually and accelerate gently.
ï Avoid excessive and unnecessary
idling.
ï Keep your engine properly tuned.
ï Do not race the engine.
ï Use the air conditioning (if equipped)
only when necessary.
ï Slow down when driving on rough
roads.
ï Always keep your tires inflated to the
recommended pressure for longer tire
life and optimum fuel economy.
ï Keep your distance from other vehicles
to avoid sudden stops. This will reduce
wear on brake linings and improve
economy as extra fuel is required to
accelerate back up to driving speed.
ï Do not carry unnecessary weight in the
vehicle.
ï Do not rest your foot on the brake pedal
while driving. This can cause needless
wear, possible damage to the brakes
and poor fuel economy.
ï Always ensure your vehicle is
maintained to the manufacturer's
specification.
ï Avoid inhaling engine exhaust gases.
Engine exhaust gases contains carbon
monoxide, which has no color or odor.
Carbon monoxide is a dangerous gas.
It can cause unconsciousness and can
be lethal if inhaled.
ï If at any time you suspect that exhaust
gases are entering the vehicle, have
the vehicle inspected and repaired
immediately by a Daewoo Dealer or
Daewoo Authorized Service Operation.
If it is necessary to drive under such
conditions, do so only with all windows
fully open.
ï To protect against exhaust gases
entering the vehicle, the exhaust
system and body should be inspected:
ñ each time the vehicle is raised for
an oil change.
ñ whenever a change is noticed in
the sound of the exhaust system.
ñ whenever the exhaust system,
underbody or rear of the vehicle is
damaged or becomes corroded.
ENGINE EXHAUST GAS CAUTION
(CARBON MONOXIDE)
Untitled-50 10/31/2006, 12:53 PM
15
37. 2ñ16
ï Do not operate the engine in confined
areas such as garages or other closed
areas any more than needed to move
the vehicle in or out of the area.
ï When the vehicle is stopped in an
unconfined area for more than a short
time with the engine running, turn off
the recirculation switch to draw the
outside air into the vehicle and set the
fan switch to high speed.
ï Never sit (or leave the children) in a
parked or stopped vehicle for any
extended period of time with the engine
running.
ï Avoid driving with trunk lid or tailgate
open, as exhaust gases could enter
the vehicle. If you must drive with the
trunk lid or tailgate open, close all
windows, turn off the recirculation
switch and open all dashboard
ventilation vents to draw the outside air
into the vehicle, and set the fan switch
to high speed.
Untitled-50 10/31/2006, 12:53 PM
16
39. 3ñ3
1. Side ventilation vents
2. Door window defroster vents
3. Head lamp leveling switch*
4. Front fog lamp switch*
5. Rear window defroster with timer*
6. Light switch
7. Steering wheel
8. Instrument clutster
9. Windshield wiper and washer switch,
tailgate window wiper and washer
switch (HB)*
10. Hazard warning flasher switch
11. Rear fog lamp switch*
12. Wiper speed control switch*
13. Digital clock
14. Center ventilation vents
15. Glove box
16. Temperature control switch
17. Air direction control switch
18. Radio (AM/FM) and cassette*
19. Cigarette lighter
20. Deposit box
21. Air conditioning switch*
22. Ashtray
23. Fan control switch
24. Reciculation switch
25. Accelerator pedal
26. Horn switch
27. Ignition and starter switch
28. Brake pedal
29. Air bag*
30. Clutch pedal
31. Fuse box
32. Fuel filler door release button
33. Trunk lid release button
40. 3ñ5
1. Side ventilation vents
2. Door window defroster vents
3. Head lamp leveling switch*
4. Front fog lamp switch*
5. Rear window defroster with timer
6. Light switch
7. Steering wheel
8. Instrument clutster
9. Windshield wiper and washer switch,
tailgate window wiper and washer
switch (HB)*
10. Hazard warning flasher switch
11. Rear fog lamp switch*
12. Wiper speed control switch*
13. Digital clock
14. Center ventilation vents
15. Glove box
16. Temperature control switch
17. Air direction control switch
18. Radio (AM/FM) and cassette*
19. Cigarette lighter
20. Deposit box
21. Ashtray
22. Air conditioning switch*
23. Fan control switch
24. Recirculation switch
25. Accelerator pedal
26. Ignition and starter switch
27. Brake pedal
28. Clutch pedal
29. Horn switch
30. Fuse box
31. Fuel filler door release button
32. Trunk lid release button
41. 3ñ7
SPEEDOMETER ODOMETERANDTRIPODOMETER
The odometer registers the accumulated
distance in kilometers.
unit: km unit: 100m
The trip odometer indicates individual
journey distances. To reset, press the
reset button located in the right and lower
area of speedometer.
unit: km unit: 100m
TACHOMETER*
The tachometer indicates engine speed.
The speedometer indicates the vehicle
speed in kilometers per hour (km/h).
To avoid possible engine damage do
not rev the engine in the red zone.
CAUTION
The warning buzzer* will sound when the
vehicle speed exceeds above the specified
speed (only for certain markets).
red zone
42. 3ñ9
("SERVICEENGINESOON"LIGHT)
ENGINE CONTROL INDICATOR
The engine control indicator
comes on when ignition is
switched on and remains illuminated during
starting. It goes out shortly after the engine
starts to run.
If the indicator illuminates during normal
running, a fault has occurred. The
electronic system switches to an
emergency running program so that driving
may be continued. Consult a Daewoo
dealer or Daewoo authorized service
operation to remedy the fault.
Do not drive for a lengthy period with the
engine control indicator illuminated as this
may increase fuel consumption and impair
the vehicle's driveability.
If the engine control indicator comes on
briefly and then goes out again this is
normal and does not indicate a system fault.
The warning light comes on when
the ignition is switched on (as a
check of bulb operation) and should go out
after the engine is started.
If the light comes on while driving, it
indicates that the oil pressure is
dangerously low. Stop the engine
immediately and check the engine oil level.
If the oil level is normal, have the
lubricating system checked at the nearest
Daewoo dealer.
ENGINEOILPRESSURE
WARNINGLIGHT
This warning light comes on
when the parking brake is applied
with the ignition on.
Make sure the parking brake is fully
released before driving. The light should
go out.
If the same warning light comes on even
when the parking brake is completely
released with the ignition on, it may
indicate that the brake fluid level in the
reservoir is low.
LIGHT
BRAKESYSTEMWARNING
Continued operation of the vehicle in
this condition is dangerous. Have the
brakes repaired immediately.
WARNING
WARNING
Do not run the engine with this light
illuminated.
Do not resume the journey if the oil is
correct, have the engine checked
immediately by a Daewoo dealer.
43. 3ñ11
The seat belt warning light comes
on whenever the ignition switch
is placed in the "II" position unless the
driver's seat belt is securely fastened.
Also, the seat belt warning chime will
sound for about 4 to 8 seconds when the
ignition switch is in the "II" position unless
the driver's seat belt is securely fastened.
SEATBELTREMINDERLIGHT*
HIGHBEAMINDICATOR
This indicator illuminates when
the headlight high beam is
switched on.
This warning light illuminates
when the ignition is switched on
and should go out after the engine has
started.
If the light doesn't come on when the ignition
is switched on, contact your nearest
Daewoo Dealer.
If the light illuminates while driving, stop your
car in a safe place and turn off the engine.
Reset the system by restarting the engine.
If the light comes on again while driving, a
malfunction of ABS system is indicated.
Have the system checked at your nearest
Daewoo Dealer.
Remember that this only means that ABS
is cancelled. Consult your Daewoo Dealer
as soon as possible if this condition
occures ñ your car's brake system will
continue to operate conventionally.
ABSWARNINGLIGHT*
ABS
44. 3ñ13
To turn the lights on or off, twist the knob
on the end of the combination switch lever.
There are three positions:
"OFF" position
All lights are off.
position
Parking, tail, license plate and instrument
panel lights are illuminated.
position
Headlight (low beam) and all the above
lights are illuminated.
Head lamp warning chime*
The chime sounds to remind you to turn off
the lights if the driver's door is opened with
them switched on, when the ignition switch
is turned to the "B" or the "I" position.
LIGHTSWITCH
Move this lever up or down to the stop
position to engage the turn indicator signals.
The turn indicator signals will cancel after
the turn is completed then the lever
returns to its normal position.
When lane changing, move the switch part
way to first stop. When released, the
switch will spring back to the off position.
TURNSIGNALSWITCH
The asymmetrical low beam increases
the field of vision on the right-hand side
of the lane.
When driving in countries which drive
on the left, the 15∞ section of the
headlamp lenses must have a black
cover strip applied.
NOTE
turn
To prevent discharging battery, don't
leave the lights on while the engine is
off.
NOTE
right
left
45. 3ñ15
WINDSHIELD WASHER SWITCH TAILGATEWINDOWWIPER
To spray washer fluid on the windshield,
with the ignition on, pull the lever toward
you and hold it there. The washer fluid is
sprayed onto the windshield and the
windshield wipers are simultaneously
operated for four cycles. When you release
the lever, it automatically returns to the "off"
position.
To operate the tailgate window wiper and
washer system, push lever away from
steering wheel.
First position (rest position)=wiper
action.
Second position (rocker position)=wiper
and washer.
The wiper operates when the lever is in
the first position. Washer fluid is sprayed
onto the tailgate window when the lever
is pushed to the second position.
WITHTIMER
REARWINDOWDEFROSTER
Pressing this button will switch on the rear
window defroster for appox. 10 minutes
when ignition is in the "II" position and
automatically switch off.
The rear window defroster indicator light
illuminates when the rear window
defroster is operating.
Pressing this button again will switch off
the rear window defroster.
ï Driving without washer fluid can be
dangerous. Check your washer
fluid level often.
ï In freezing weather, don't use your
washer until the windshield is
warmed. Otherwise the washer fluid
can form ice on the windshield,
blocking your vision.
CAUTION
ANDWASHERSWITCH*
push
pull
Do not use scrapers or any other
sharp instrument, or window cleaners
containing abrasives, on the interior
surface of the rear window or electrical
conductors may be damaged.
CAUTION
push
46. 3ñ17
REARFOGLAMPSWITCH*
To turn on the rear fog lamps, push this
switch while the front fog lamps are turned
on.
The indicator light illuminates when the
lamps are switched on.
Pushing it again will turn off the lamps.
Using the rear fog lamps at night and
in wet weather may dazzle drivers
travelling behind your vehicle and
cause an accident. Use only in severe
fog conditions.
CAUTION
SWITCH*
WIPERSPEEDCONTROL
The frequency of intermittent front
wipers can be varied from 4 seconds to
24 seconds by turning the knurled knob
when the wiper is in the "INT" position.
The room lamp switch has three
positions.
"ON" position
The light comes on and stays on
regardless of whether a door is open or
closed.
"DOOR" position (between "ON" and
"OFF")
The light comes on when a door is opened.
"OFF" position
The light remains off even when a door is
opened.
ROOMLAMP
push
47. 3ñ19
SUNVISORS
The sunvisors are padded and can be
swung up and down and to the side for
protection of driver and passenger ag-ainst
glare.
1. Front
swing down
2. Side
turn
3. Vanity mirror
The vanity mirror is located on the back
of the passenger side sunvisor.
DIGITALCLOCK
Digital Clock Adjusting Button
1. H ñ Hour Adjusting Button.
(Ignition II position)
Press H button to adjust hour digits.
Hold the button to adjust rapidly
2. M ñ Minute Adjusting Button.
(Ignition II position)
Press M button to adjust minute digits.
Hold the button to adjust rapidly
3. S ñ Setting Button
(Ignition II position)
To reset the time by the time signal,
press the S button.
For example, if this button is pressed
while the time is between 8:00 and 8:29
the display is set to 8:00. If this button
is pressed while the time is between
8:30 and 8:59, the display is set to
9:00.
8:00 8:29 > 8:00
8:30 8:59 > 9:00
4. DISP ó Display Button
(Ignition Off position)
While pressing D button, the time
appears in the display.
48. 3ñ21
ILLUMINATION
LUGGAGECOMPARTMENT
The lamp will come on when the trunk lid
(or tailgate) is opened.
GLOVEBOX
Open the glove box by pulling the bottom
of the handle upwards.
Close it with a firm push.
Lockable glove box*
To lock or unlock the glove box, insert the
key into the slot and turn it clockwise or
counterclockwise respectively.
To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the glove box lid closed
while driving.
WARNING
GLOVEBOXILLUMINATION*
The glove box is illuminated when the lid is
in the open position with the ignition
switch placed in the "II" position.
pull handle
upwards
50. 4ñ2
LUGGAGECOMPARTMENT
ENLARGEMENTOFTHE
(HATCHBACK)
(2)
(3)
(4)
seats.
4. Push front seats forwards. Pull up rear
seat cushion using strap. Hook belt
buckles on backrest. Unlock back rest
and fold down. Place cover behind
front seats.
If you encounter any problems with
enlarging the luggage compartment, your
Daewoo dealer will be pleased to
demonstrate this system.
(1)
The following figures show the method for
enlarging the luggage compartment:
1. Unlock the cover on both sides by
depressing the buttons and lift cover
hinges out of the slots.
2. Unhook the cover from the tailgate,
unlock by depressing pushbuttons on
both sides and lift. Tilt rear edge
downwards. Unlock rear seat backrest
and tilt forwards slightly. Hook cover
into the locking devices. Engage
backrest so that it locks audibly on both
sides.
3. Hook belt buckles on backrest. Unlock
backrest and fold down onto seat
cushion. Place cover behind front
push
pull
51. 4ñ3
1. To open the engine hood, pull the
release knob to unlatch the hood.
2. Pull the hook up and lift the engine
hood.
3. Hold the engine hood open with the
support rod.
4. Before closing the engine hood,
return the support rod to its clip. This
prevents rattles.
5. Lower the engine hood and make
sure it locks into place by pressing
gently on the front of the hood.
Your vehicle has aerodynamic roof drip
mouldings with installation holes for roof
racks. Avoid damaging the roof when
installing the roof racks.
The installation holes are covered by slides:
press and open by moving in the direction
of the arrow.
ROOFRACK
Fit the mounting parts on the concealed
drip moulding.
ENGINEHOOD
ï Before releasing the engine hood
latch, turn off the ignition, remove
the key, place the gearshift lever in
1st or Reverse with manual
transmisssion, in P (PARK) with
automatic transmission, and set
the parking brake fully.
ï If it is necessary to check beneath
the engine hood with engine
running, place the gear selector
lever in N (NEUTRAL) or P (PARK)
and set the parking brake fully.
Unexpected and possible sudden
vehicle movement may occur if
these precautions are not taken.
ï To avoid the possibility of personal
injury, you should always turn off
the ignition and remove the key
before working under the engine
hood unless the particular
procedure specifically requires
other wise. If the procedure
requires you to run the engine
while working under the engine
hood, do not permit any clothing,
such as neckties, handkerchiefs,
near the engine or radiator fan.
They can become entangled in
moving parts and result in
personal injury and damage to the
vehicle.
Also, remove watches, bracelets
and rings.
WARNING
pull
52. 4ñ4
The ski sleeve is located behind the rear
armrest on saloon models.
You can transport skis or other similar
objects safely without soiling or damaging
the interior of your vehicle.
To use the ski sleeve ;
1. Pull down the rear seat armrest and
open the cover behind it.
2. Push the button located in the upper
side of the opening to open the ski
sleeve lid in the trunk.
Also, the ski sleeve lid can be opened
by pushing the button on the ski sleeve
lid.
SKISLEEVE*
button
POWERSUNROOF*
The power sun roof can only be operated
with ignition "ON".
A: Sun roof lamp
B, C: Sun roof operating switch
To open the sun roof, hold down the "B"
side of the switch.
To close the sun roof, hold down the "C"
side of the switch.
3. Open the trunk and inset your load from
the trunk into the interior.
4. Use the strap on the ski sleeve to
secure the load tightly to the armrest.
ï When the ski sleeve is not used,
keep the lid closed.
ï Before folding up the ski sleeve for
storage, make sure it is dry both
inside and outside.
This will help prevent mildew.
NOTE
ski sleeve lid
C B
A
53. 4ñ5
ï Be extremely careful not to have
any part of your body in the sun
roof opening while it is closing.
ï Do not stand up or extend any
portion of your body out of the
opening while driving.
ï Remove water drops, snow, ice or
sand from on top of the sun roof
before opening.
ï Do not place any heavy objects on
the sun roof or surrounding area.
ï Care must be taken when
operating the power sun roof.
There is a risk of injury, particuiarly
for children, and a danger that
articles could become trapped.
ï Make sure that all vehicle
occupants know how to operate
sun roof correctly.
ï Keep a close watch on sun roof
when closing it. Ensure that
nothing becomes trapped in it.
ï Before leaving the vehicle, remove
the ignition key.
WARNING
55. 5ñ2
VENTILATIONANDHEATING
Air mixture system: by mixing cold and
hot air the temperature can be regulated
without delay and thereby held practically
constant at all speeds.
The rate of air flow is determined by the
fan. The fan should therefore be switched
on if required even when driving.
Heating the rear foot area: cold or heated
air is routed to the rear foot area via ducts
underneath the carpet.(*)
Air can be directed into the vehicle via
both center vents. The vents are opened
by means of the regulating wheel. With the
wheel in the resting position, they are
closed.
The air flow can be directed as desired by
tilting and swivelling the fins.
air flow direction adjusting lever
SIDEVENTILATIONVENTS
air flow quantity adjusting wheel
CENTERVENTILATIONVENTS
Air can be directed into the vehicle via both
side ventilation vents.
FRONTDOORWINDOW
DEFROSTERVENTS
air flow direction adjusting lever
air flow quantity adjusting wheel
Cooled and warm air will be directed onto
the windshield and onto the side windows
(mainly in the area of the outside mirror).
56. 5ñ3
The ventilation, heating and refrigeration
sections make up a functional unit
designed to provide maximum comfort at all
times of year, under any weather
conditions and at any outside temperature.
The refrigeration unit of the air conditioning
system cools the air and removes moisture
and dust.
The heating unit heats the air as required
in all operating modes depending on the
position of the temperature switch. The
quantity of inflowing air is regulated by
using the fan.
AIRCONDITIONINGSWITCH*
SWITCH
TEMPERATURECONTROL
AIRCONDITIONINGSYSTEM*
indicator
When using the air conditioning while
driving up long hills or in heavy traffic,
watch the engine temperature gauge.
The air conditioning may cause engine
overheating. If the gauge indicates this,
turn off the air conditioning.
CAUTION
This switch turns on and off the air
conditioning.
Start the engine, turn the fan speed control
switch to the desired speed and press the
air conditioning switch to turn on the air
conditioning. The indicator light will come on
when the air conditioning is on.
To stop the air conditioning, press this
button again.
The air conditioning compressor does not
operate when the fan control switch is at
Off position or the outside temperature is
below approx. 0∞C.
cold
(blue)
hot
(red)
Temperature switch is used for infinite
adjustment of the temperature of cooled
and warm air as well as that of the
inflowing uncooled outside air.
The left side position: cold (blue)
The right side position: hot (red)
57. 5ñ4
FANCONTROLSWITCH AIRDIRECTIONCONTROLSWITCH
This switch allows you to select the
outlet air flow.
(FACE): Air flows from the
center and side
ventilators.
(BI-LEVEL): Air flows from the
center, side ventilators
and the foot outlets of
front seat.
(FOOT): Air flows mainly from
foot outlets of front
seat.
(DEF): Defrosting windshield
and side windows.
Press this switch when driving in dusty
conditions or to avoid traffic fumes, and
when quick cooling or heating is required.
The indicator light will illuminate and
interior air is recirculated inside the
vehicle.
Pressing it again will draw outside air into
the passenger compartment.
The indicator will go out.
RECIRCULATIONSWITCH
Recirculation switch should not be
turned on for long periods of time. It
may cause the interior air to become
stuff and the windows to fog up.
Driving with the windows fogged up is
dangerous and may cause you to
have an accident.
CAUTION
indicator
The fan switch provides the speed
control of the blower fan (there are 4 fan
speeds).
58. 5ñ5
MAXIMUMCOOLING NORMALCOOLING
Normal cooling during interurban and
motorway driving.
Air conditioning switch: ON
Recirculation switch: OFF
Air direction control switch: or
Temperature switch: Blue colored
Fan switch: As required
During hot weather and when the vehicle
has been exposed to the sun for lengthy
period. Open window briefly so that warm
air can escape rapidly.
Air conditioning switch: ON
Recirculation switch: ON
Air direction control switch:
Temperature switch: extreme left side
position (blue colored)
Fan switch: speed 4
To be used during transitional periods e.g.
low outside temperature and little
sunshine.
Warmer air will flow into the floor area
and cooler air into the upper zone, when
the temperature switch is adjusted
between cold (blue) and hot (red).
Air conditioning switch: ON
Recirculation switch: OFF
Air direction control switch:
Temperature switch: Between cold (blue)
and hot (red)
Fan switch: As required
BI-LEVEL
59. 5ñ6
MAXIMUMHEATING NORMALHEATING
Air conditioning switch: OFF
Recirculation switch: ON
Air direction control switch:
Temperature switch: extreme right side
position (red colored)
Fan switch: speed 4
If windows fog up or moisten, turn off the
recirculation switch.
VENTILATION
Outside air is directed through the center
and side ventilation vents.
Air conditioning switch: OFF
Recirculation switch: OFF
Air direction control switch: or
Temperature switch: As required
Fan switch: As required
Air conditioning switch: OFF
Recirculation switch : OFF
Air direction control switch: or
Temperature switch: Red colored
Fan switch: As required
60. 5ñ7
ï If the car has been parked in direct
sunlight, open the windows before
operating.
ï To clean misted windows on rainy
days, decrease the temperature inside
the car by operating the air condi-
tioning. This is most effective during
rainy weather and high humidity.
ï When driving in heavy traffic areas,
insufficient cooling may occur because
of stopping and slowing down of the
car.
ï When the air conditioning system is not
being used for a month or more, you
must run the engine at idle and turn the
system on for a few minutes once
each week, even during winter months.
This will keep the compressor and
seals properly lubricated and will
prolong the service life of the system.
ï Air conditioning compressor does not
operate when the fan control switch is
at off position or when the outside
temperature is below approx. 0∞C.
DEFROSTING
COOLINGSYSTEM
OPERATINGTIPSFOR
Do not use the position during
cool operation in extremely humid
weather. The difference between
outside air and the windshield
temperatures could cause the out
surface of the windshield to fog up
and restrict or block your view.
WARNING
Turn the air conditioning on to
improve defroster efficiency.
NOTE
Air conditioning switch: OFF or ON
Recirculation switch: OFF
Air direction control switch:
Temperature switch: As required
Fan switch: As required
62. 6ñ2
1. On-off/Volume control
(push button)
ï Power on-off
Press this knob to sw
audio system and pre
switch off the audio sy
ï Volume control
Turn this knob clo
increase the volume.
Turn this knob counter
reduce the volume.
2. Treble/Bass control kn
(push button)
The bass control knob is
just the bass(low-freque
quality.
The treble control knob is
just the treble(high-freqe
quality.
ï Treble control
To use the treble cont
the knob and allow it to
it clockwise to increas
and counterclockwise
the treble.
ï Bass control
Pull this knob in the treb
sition until the click sou
1. On-off/Volume control knob
(push button)
2. Treble/Bass control knob
(push button)
3. Balance/Fader control knob
(push button)
4. AM/FM band selector button
5. Auto Memory Button
6. Eject button
7. Cassette slot
8. Fast rewind button
9. Fast forward button
8. 9. Program and FF/REW stop button
10. V.F.D
11. Metal tape selector button
12. Dolby NR button
13. Preset station/memory button
14. Tuning up( )/down( ) button
15. Security warning LED*
(AKF-9625)*
RADIOANDCASSETTE
The radio and cassette tape player is
located in the center of the instrument
panel.
Your vehicle is equipped with an audio
system which has an Electronically Tuned
Radio(ETR) and an auto-reverse cassette
tape player.
The radio has seek feature for electronic
station tuning and receives both FM stereo
and AM broadcasts.
The cassette tape player has an auto-
reverse feature so that it will automatically
reverse and play the other side of the
tape when the cassette player reaches
the end of one side providing continuous
tape playing.
ï Radio reception is affected by sta-
tion signal strength, distance from a
radio transmitter, buildings, bridges,
mountains and other external influ-
ences. Intermittent changes in re-
ception quality are normally caused
by these external influences.
ï Turn the radio off if jumper cables
and booster battery are used to start
your car, to avoid damage to any of
the electronic circuits.
NOTE
11
12 13
14
15
1
8 9
7
4 5
10
6
3
2
Untitled-46 10/31/2006, 12:54 PM
2
63. 6ñ3
At that position, turn it clockwise to
increase bass tone, counterclock-
wise to decrease bass tone.
3. Balance/Fader control knob
(push button)
ï Balance control
This knob comes out by pushing it
slightly.At that position, turn it clock-
wise to increase the volume of right
speakers and counterclockwise to
increase the volume of left speakers.
ï Fader control
Pull this knob in the balance control
position until the click sound is
heard, At that position, turn it clock-
wise to increase front speaker vol-
ume, and counterclockwise to in-
crease rear speaker volume.
4. AM/FM band selector button
Press this button to select FM1, FM2,
AM1 or AM2 band.
Band changes as follows;
> FM1 > FM2 >AM1 > AM2
1. On-off/Volume control knob
(push button)
ï Power on-off
Press this knob to switch on the
audio system and press again to
switch off the audio system.
ï Volume control
Turn this knob clockwise to
increase the volume.
Turn this knob counterclockwise to
reduce the volume.
2. Treble/Bass control knob
(push button)
The bass control knob is used to ad-
just the bass(low-frequency) sound
quality.
The treble control knob is used to ad-
just the treble(high-freqency) sound
quality.
ï Treble control
To use the treble control, push on
the knob and allow it to extend. Turn
it clockwise to increase the treble
and counterclockwise to decrease
the treble.
ï Bass control
Pull this knob in the treble contol po-
sition until the click sound is heard.
5. Auto memory button
When this button is pressed for more
than 2 seconds after selecting band,
auto memory store starts and stations
are automatically searched for in in-
creasing frequency from the frequency
currently received station, and stored
into the preset station buttons 1 through
to 6 in sequence. After storing 6 stations,
this function is automatically resets to
preset scan function, so that the preset
stations are tuned in successively for 5
seconds each.
When the desired station is tuned in,
press the corresponding preset station
button in order to release the preset
scan function.
When you use this auto memory func-
tion, the previously memorized sta-
tions are erased.
6. Eject button
Press the button to eject the cassette
tape.
Untitled-46 10/31/2006, 12:54 PM
3
64. 6ñ4
ANTI-THEFT SYSTEM*
The identification card, stam
security code number, is prov
vehicle. Keep it in a safe plac
The audio security system
immediately whenever th
disconnected from the battery
To make the audio system op
you must enter a four-figure s
with the preset station button
The security warning LED wi
when the ignition key is remo
disappear when the ignitio
turned to the I position.
7. Cassette slot
Switch the radio on and push the cas-
sette fully into the slot with the tape
facing the right side. Mode is automati-
cally transferred from the radio to the
cassette system, the cassette will now
play.
8. Fast rewind button
Press this button to fast rewind the
tape.
Press the "program and FF/REW stop
button" slightly to stop the fast rewind
movement.
9. Fast forward button
Press the button to fast forward the
tape.
Press the "program and FF/REW stop
button" slightly to stop the fast forward
movement.
8. 9. Program and FF/REW stop button
Press 8 and 9 buttons simultaneously
to play the opposite side of tape that
is currently playing.
Also, press 8 and 9 button simulta-
neously to stop fast forward or rewind
movement, and then the tape begins
to play.
13. Preset station/manual memory but-
ton
You can choose the preset station by
pushing the button for less than 2 sec-
onds with the corresponding number.
If you want to preset a certain station
in the memory:
1. Select a desired band using band
selector button.
2. Choose the desired station using
tuning up/down button.
3. Push one of 6 preset buttons for
more than 2 seconds.
14. Tuning up( )/down( ) button
Press the tuning up or down button to
increase or decrease the frequency.
Manual tuning:
When pressing tuning up or down
button for less than 0.5 seconds, the
frequency of AM band changes 9KHz
each time and the frequency of FM
band changes 50KHz each time.
Seek function:
When pressing the tuning up or down
button for more than 0.5 seconds, the
next station is automatically received in
that direction of frequency.
11. Metal tape button
Press this button when playing a high-
position type like a metal tape, a chrome
tape, etc.
The metal tape indicator "MTL" will be
illuminated in the V.F.D.
Switch off for a normal- position type.
12. Dolby NR button
Press this button when playing back
tapes which have been recorded us-
ing Dolby noise reduction system. The
Dolby symbol( ) will be illuminated
in the V.F.D. This system improves the
signal to noise ratio of the tape sec-
tion, resulting in reduced audible "hiss"
during playback.
10. V.F.D
Preset button
indicator
FM stereo indicator Tape playing
direction indicator
Frequency indicator
AM/FM band indicator
Metal indicator
Dolby indicator
Untitled-46 10/31/2006, 12:54 PM
4
65. 6ñ5
ANTI-THEFT SYSTEM*
The identification card, stamped with the
security code number, is provided with the
vehicle. Keep it in a safe place.
The audio security system activates
immediately whenever the audio is
disconnected from the battery.
To make the audio system operate again,
you must enter a four-figure security code
with the preset station buttons.
The security warning LED will be flashed
when the ignition key is removed, and will
disappear when the ignition switch is
turned to the I position.
How to enter the security code
1. Connect the audio system to the battery
and turn the ignition switch to the I
position. You will hear the beep.
2. Enter a four-figure security code using
the preset station buttons.
3. When the correct code is entered,
you will hear the beep 1 time in 1
second, total 3 times in 3 seconds.
Then, switch on the audio system. It
will now function.
4. If the incorrect code is entered, you will
hear the beep 3 times in 1 second.
To operate the audio system, the
correct code must be entered within 10
minutes.
If the correct code is not entered within
10 minutes, the audio system should be
disconnected from the battery to reset
the audio system.
After reconnecting the audio system to
the battery, repeat the above
procedure(1 to 4).
Untitled-46 10/31/2006, 12:54 PM
5
66. 6ñ6
REMOVING AND ATTAC
Before operating your
Removing panel
1. Press the release button
2. Grasp the right side of th
direction carefully.
Front panel
3. Keep the front panel into
for protection.
Take care not to put pressur
panel.
CAUTION
(AKF-5073K)*
RADIOANDCASSETTE
AKF-5073K provides as following controls
and features.
ï FM, MW and LW radio reception
ï R.D.S(PI, PS,AF, TP/TA, EON, PTY)
ï Auto reverse
ï Stereo/mono
ï Positive LCD screen
ï Manual tuning
ï Automatic station seeking
ï Volume/Bass/Treble/Balance/Fader
control
ï Preset memory 6 stations
(FM1, FM2, MW, LW)
ï Warning flashing LED
ï 3 quarter panel detachable for anti-theft
1. On-off/volume/balance control knob
2. Fader control knob
3. Bass/treble control knob
4. Tuning up( )/down( ) button
5. AF/mono/stereo select button
6. Eject button
7. Cassette slot
8. Band select button
9. Tape mode select button
10. Display select button
11. TP mode on/off button
12. PTY mode on/off button
13. Fast rewind button
14. Fast forward button
13+14. Program button
15. Front panel release button
16. Auto travel preset button
17. Preset buttons
18. L.C.D
18
14
ï Radio reception is affected by sta-
tion signal strength, distance from a
radio transmitter, buildings, bridges,
mountains and other external influ-
ences. Intermittent changes in re-
ception quality are normally caused
by these external influences.
ï Turn the radio off if jumper cables
and booster battery are used to start
your car, to avoid damage to any of
the electronic circuits.
NOTE
12
2 1
3 5
4 6 7 8 9 10 11 13
15
16
17
Untitled-46 10/31/2006, 12:54 PM
6
67. 6ñ7
REMOVING AND ATTACHING
Before operating your stereo, you should know:
Removing panel
1. Press the release button (15) to unlock front panel.
2. Grasp the right side of the panel and pull toward to arrow
direction carefully.
Attaching panel
1. Hold the panel along top and bottom edges.
2. Insert detachable panel straight into main unit(DO NOT TILT).
ï If any of the controls fail to operate, remove and reinstall
the detachable panel.
ï DO NOT touch the gold colored contacts on the
detachable panel and on the main unit since this may
result in poor electrical contact. If the contacts should
become dirty, wipe them with a clean, dry cloth.
ï DO NOT allow such volatile agents as benzine, or
inserticides to come into contact with the surface of the
front panel.
ï DO NOT drop the detachable panel and do not give it
strong impact.
ï NEVER TRY TO DISASSEMBLE the front panel.
ï When leaving the vehicle, always place the detachable
panel inside the provided carrying case and take it with
you. The warning LED will be flashed when the
detachable front panel is removed.
ï Always remove the cassette tape before releasing the
detachable front panel.
CAUTION
Front panel
3. Keep the front panel into the provided plastic carrying case
for protection.
Take care not to put pressure on the display or drop the front
panel.
CAUTION
Untitled-46 10/31/2006, 12:54 PM
7
68. 6ñ8
Auto travel preset button
The unit will sean selected b
stations in sequent from the st
LW)
1) Sel
2) Pre
sec
The
pea
Sca
the
hea
Press
second
the stat
the ord
1) Pre
sec
2) Pre
for
ceiv
sto
eac
the
it ag
Presetting
stations
Recalling the
AUT
Preset stations
Scanning the
AUT
Preset stations
Desired operation
Mode select button
It is possible to switch immediately to you desired mode.
* A cassette tape must have been set.
Display select button (10)
Press this button to select the desired display.
Desired mode Pressing button
Radio Band(8)
Tape Tape(9)
Mode Display shift
PS(Prior display) Frequency
Frequency
Tape(Prior display) Frequency
PTY PS(Prior display) Frequency
(When pressing the button for more than
1.5 seconds.)
Radio(FM RDS)
Radio(FM NON-
RDS, MW)
Tape
FMPTY
GENERAL OPERATION
On/off - Volume control knob (1)
Rotate this knob (1) to turn on the unit. You can also regulate the
volume control with this knob. Turn it clockwise to increase volume.
Turn it counterclockwise to decrease volume. Rotate this knob
(1) further counterclockwise to turn off the radio.
Balance control knob (1)
Pull and rotate this knob (1) clockwise to increase the right speaker
volume, counterclockwise to increase the left speaker volume.
You should be able to feel the mid position of this control at this
point, volume from left and right should be equal.
Fader control knob (2)
Rotate the fader control knob (2) counterclockwise to increase
the rear speaker volume, clockwise to increase the front speaker
volume.
Bass/treble control knob (3)
The bass control is used to adjust the bass(low-frequency) sound
quality. Turn it clockwise to increase bass tone, counterclockwise
to decrease bass tone.
The treble control is used to adjust the treble(high-freqency)
sound quality. Pull this knob and turn it clockwise to increase the
treble and counterclockwise to decrease the treble.
Untitled-46 10/31/2006, 12:54 PM
8
69. 6ñ9
Auto travel preset button (16)
The unit will sean selected band and memorize the strongest 6
stations in sequent from the strongest one.(6FM1, 6FM2, 6MW, 6
LW)
ï If all stations are weak, none may be memorized. If this
should occur, "0000" will appear on the display and the
warning tone will be heard. Then the unit will receive the
last station which was received before.
ï If there are fewer than 6 receivable stations, the unit will
memorize all the receivable stations. And the first memo-
rized station will be heard.
ï This unit has RDS functions. So, it does not memorize
the RDS stations of the same PI code.(In FM mode)
NOTE
1) Select the desired band.
2) Press this button for more than 1.5
seconds.
Then the indicator "AUT" and ap-
pears on the display.
Scanning will stop automatically and
the first memorized station will be
heard.
Press this button for less than 1.5
seconds. Each time button is pressed,
the station will shift one after another in
the order they were memorized.
1) Press this button for less than 1.5
seconds to select AUT mode.
2) Press the band selector button (8)
for more than 1.5 seconds to re-
ceive, in sequence, all the stations
stored in the memory for 5 seconds
each. To stop scanning and listen to
the current receiving station, press
it again.
Presetting
stations
Recalling the
AUT
Preset stations
Scanning the
AUT
Preset stations
Desired operation Procedure
1. TP indicator
2. TP function indicator
3. AUT indicator
4. PTY indicator
5. Band indicator
6. Preset number indicator
7. Frequency or station name
indicator, PTY display
8. AF indicator
9. Mono indicator
10. Stereo indicator
3 4
2
7
L. C. D
8
1 9 10
6 5
Untitled-46 10/31/2006, 12:54 PM
9
70. 6ñ10
1) Sel
the
rize
2) Pre
1.5
diti
pro
Sel
the
Presetting
stations
Recalling the
preset stations
Desired operation
4. Stereo/mono button (5
If FM stereo broadcasting is
seconds or more to get the in
To return to stereo mode, pr
The indicator "MO" will dis
received, the indicator " "
5. Preset buttons (17)
6 stations can be preset on ea
TAPE OPERATION
1. Cassette tape slot door (7)
Insert a cassette into this slot door with the exposed tape facing
to the right. Then tape play will begin.
2. Tape mode select button (9)
If a cassette is already inserted, press this button to play the tape.
3. Fast forward
Press the FAST FORWARD button (14) to rapidly advance the
tape. Press the REWIND button to release the fast forward
button.
4. Rewind
Press the REWIND button (13) to rapidly rewind the tape.
Press the FAST FORWARD button to release to rewind button.
5. Program buttons (13+14)
Press the FAST FORWARD and REWIND buttons
simultaneously to reverse the cassette direction and to play either
side of the type. The direction when the tape is traveling is
indicated by the arrows on the display. The right side arrow
indicates normal tape direction.
6. Tape eject
Press the EJECT button (6) completely to remove the cassette.
Then the mode changes to the preceding one.
RADIO OPERATION
1. Radio mode select button (8)
Press this button to turn on the radio.
2. Band select button (8)
Press this button to select the desired band.
Always remove the cassette tape before releasing the
detachable front panel.
NOTE
3. Tuning up or down buttons (4)
Pressing one of the buttons, tune in a frequency.
Band shift Pressing time
FM1 < > FM2 Less than 1.5 seconds
FM1, 2 > MW 1.5 seconds or more
MW > FM1, 2 Less than 1.5 seconds
MW > LW 1.5 seconds or more
* Auto(seek) tuning ñ The unit will seek in the direction of the
button pressed, and stop on the first strong station.
To tune up
Press "tuning up
button( )" for less
than 0.7 seconds.
Press "tuning up
button( )" for 0.7
seconds or more
To tune down
Press "tuning down
button( )" for less
than 0.7 seconds.
Press "tuning down
button( )" for 0.7
seconds or more
Auto(seek)
tuning
Manual tuning
Untitled-46 10/31/2006, 12:54 PM
10
71. 6ñ11
RDS OPERATION
1. AF mode off button (5)
While the "AF" indicator is shown(AF mode on), once tuned to an
RDS network station, as long as you drive within the area or nation
served by the network, the unit will automatically retune to the
strongest transmitter serving the network, using the PI and AF
codes, when the tuned station gets weaker.
To cancel the mode, press this button.
To make the mode on, press it again to retune to other frequency.
1) Select the desired band and tune to
the station which has to be memo-
rized.
2) Press the desired preset button for
1.5 seconds or more. To preset ad-
ditional stations, repeat the same
procedure.
Select the desired band and press
the desired preset button.
Presetting
stations
Recalling the
preset stations
Desired operation Procedure
4. Stereo/mono button (5)
If FM stereo broadcasting is too noisy, press this button 1.5
seconds or more to get the indicator "MO".
To return to stereo mode, press it again 1.5 seconds or more.
The indicator "MO" will disappear. If FM stereo broadcast is
received, the indicator " " will appear on the display.
5. Preset buttons (17)
6 stations can be preset on each band.(FM1, FM2, MW, LW)
If the tuned RDS station doesn't have AF(List of Alternative
Frequencies) data or the unit cannot receive the AF data for
some reason, the network following will not work when the
tuned RDS station's signal falls below a certain level.
NOTE
2. TP mode on/off button (11)
Press this button to receive only stations with traffic information
service(TP stations) or EON linked stations with TP stations. The
"TP" indicator appears in the display.
When a TP station is tuned in, the indicator " TP " appears.
ï You may listen to the traffic information in any condition as
follows; you are just playing a cassette or the volume level is
quite low.
ï When receiving the information directly from the station, if the
presently heard traffic information becomes weak, the unit
seeks another TP stations in the network automatically. If it
happens when receiving it through the EON linked station, the
unit returns to the own program of EON linked station auto-
matically.
Untitled-46 10/31/2006, 12:54 PM
11