Certificate 63845 quartz
•
0 likes•54 views
This certificate provides information about a product called Wilsonart Quartz that has been certified under the GREENGUARD Gold standard. It lists the certificate number, period of validity, and status as certified. It confirms the product was tested according to UL 2821 and found compliant with California emission standards. The certificate holder is authorized to use the UL Environment Mark for this product within the dates specified on the certificate.
Report
Share
Report
Share
Download to read offline
Recommended
Rideau Station indoor air quality assessment report
An indoor air quality assessment was conducted at the Rideau Station of the Ottawa Light Rail Train due to odor complaints. Measurements of oxygen, hydrogen sulfide, combustible gases, volatile organic compounds, carbon monoxide, carbon dioxide, and relative humidity were taken at 5 locations. No concerns were identified for the measured parameters, which met applicable guidelines. The source of the odor is being addressed separately.
cv16
Trish Matthews provides a curriculum vitae summarizing her experience and qualifications for laboratory work. She has over 15 years of experience working in biological and chemical laboratories, conducting quality control testing and analysis. Her experience includes working with NHS Public Health Wales, Ecolab, the Environment Agency, EPL Animal Care, Cabot Carbon, and Severn Trent Laboratories. She has qualifications in biological sciences, natural sciences, legal studies, and science.
Dan Gaskill resume
Dan Gaskill has over 15 years of experience in analytical chemistry and laboratory management. He holds a Bachelor's degree in Biology from Drexel University and has worked in various roles such as Analytical Supervising Chemist, Analytical Chemist, GCMS Analytical Chemist, GC Analytical Technician, and Lab Technician. His skills include gas chromatography, mass spectrometry, wet chemistry techniques, maintaining ISO/GLP certifications, and supervising laboratory operations. He is currently working as an Analytical Supervising Chemist/Interim Lab Manager at Weidmann Diagnostics where he oversees laboratory operations and quality control.
Defects Analysis and Optimization of Process Parameters using Taguchi Doe Tec...
This document describes an analysis of the cold shut defect in sand castings using Taguchi design of experiments techniques for parameter optimization. Data was collected from a foundry producing gray iron castings showing the splash delivery casing component had the highest rejection rate due to cold shut defects. Pareto analysis identified cold shut as the primary cause of rejection. Process parameters of pouring temperature, pouring time, and gating system were selected for optimization. Taguchi L4 orthogonal array experiments were conducted varying these parameters. Signal to noise ratio analysis identified the optimal parameter levels for minimizing cold shut defects. Implementing the optimized parameters reduced casting rejection rates.
B seba CV
Seba Salem Rawashdeh seeks a position utilizing her 2 years of experience in ISO/IEC 17025 laboratory accreditation and testing water samples. She has worked at the Prince Faisal Centre for Dead Sea research in Jordan, maintaining their quality management system and conducting tests such as TDS, TSS, pH, COD, BOD. She is skilled in using laboratory equipment like AAS, IC, GC-MS, FTIR and has certificates in ISO/IEC 17025, internal auditing, and laboratory test validation.
CONCEPT & TYPE OF VALIDATION OF GOVERNMENT REGULATION
This document discusses the concept and types of validation of government regulation for pharmaceutical processes. It defines validation and describes the main types, including analytical method validation, equipment validation, cleaning validation, and process validation. For each type, key aspects and considerations are outlined. The history and regulatory basis for process validation are also summarized.
Mark Maples Word ResumeUse
Mark Maples has over 10 years of experience working as a laboratory technician for various companies such as Becton Dickinson, Black Light Power, BASF, Colgate-Palmolive, and Caravan Ingredients, where he performed tasks like materials testing, product quality assurance testing, chemical analysis, and laboratory instrumentation operation and maintenance. He has a certificate in Chemical Technology from Essex County College and hazardous waste training from Rutgers.
Shawn Lee www.teresashawncorp.com
This document summarizes Shawn Lee's objective of obtaining a scientific position utilizing his training and knowledge in areas like pharmaceutical quality control, research and development, and manufacturing. It lists his technical skills in chromatography, spectroscopy, and immunoassay. It then summarizes his work experience from 1989 to present in analytical roles for companies like Johnson & Johnson, Organon, and Roche, involving tasks like method development, validation, out of specification investigations, and computer systems.
Recommended
Rideau Station indoor air quality assessment report
An indoor air quality assessment was conducted at the Rideau Station of the Ottawa Light Rail Train due to odor complaints. Measurements of oxygen, hydrogen sulfide, combustible gases, volatile organic compounds, carbon monoxide, carbon dioxide, and relative humidity were taken at 5 locations. No concerns were identified for the measured parameters, which met applicable guidelines. The source of the odor is being addressed separately.
cv16
Trish Matthews provides a curriculum vitae summarizing her experience and qualifications for laboratory work. She has over 15 years of experience working in biological and chemical laboratories, conducting quality control testing and analysis. Her experience includes working with NHS Public Health Wales, Ecolab, the Environment Agency, EPL Animal Care, Cabot Carbon, and Severn Trent Laboratories. She has qualifications in biological sciences, natural sciences, legal studies, and science.
Dan Gaskill resume
Dan Gaskill has over 15 years of experience in analytical chemistry and laboratory management. He holds a Bachelor's degree in Biology from Drexel University and has worked in various roles such as Analytical Supervising Chemist, Analytical Chemist, GCMS Analytical Chemist, GC Analytical Technician, and Lab Technician. His skills include gas chromatography, mass spectrometry, wet chemistry techniques, maintaining ISO/GLP certifications, and supervising laboratory operations. He is currently working as an Analytical Supervising Chemist/Interim Lab Manager at Weidmann Diagnostics where he oversees laboratory operations and quality control.
Defects Analysis and Optimization of Process Parameters using Taguchi Doe Tec...
This document describes an analysis of the cold shut defect in sand castings using Taguchi design of experiments techniques for parameter optimization. Data was collected from a foundry producing gray iron castings showing the splash delivery casing component had the highest rejection rate due to cold shut defects. Pareto analysis identified cold shut as the primary cause of rejection. Process parameters of pouring temperature, pouring time, and gating system were selected for optimization. Taguchi L4 orthogonal array experiments were conducted varying these parameters. Signal to noise ratio analysis identified the optimal parameter levels for minimizing cold shut defects. Implementing the optimized parameters reduced casting rejection rates.
B seba CV
Seba Salem Rawashdeh seeks a position utilizing her 2 years of experience in ISO/IEC 17025 laboratory accreditation and testing water samples. She has worked at the Prince Faisal Centre for Dead Sea research in Jordan, maintaining their quality management system and conducting tests such as TDS, TSS, pH, COD, BOD. She is skilled in using laboratory equipment like AAS, IC, GC-MS, FTIR and has certificates in ISO/IEC 17025, internal auditing, and laboratory test validation.
CONCEPT & TYPE OF VALIDATION OF GOVERNMENT REGULATION
This document discusses the concept and types of validation of government regulation for pharmaceutical processes. It defines validation and describes the main types, including analytical method validation, equipment validation, cleaning validation, and process validation. For each type, key aspects and considerations are outlined. The history and regulatory basis for process validation are also summarized.
Mark Maples Word ResumeUse
Mark Maples has over 10 years of experience working as a laboratory technician for various companies such as Becton Dickinson, Black Light Power, BASF, Colgate-Palmolive, and Caravan Ingredients, where he performed tasks like materials testing, product quality assurance testing, chemical analysis, and laboratory instrumentation operation and maintenance. He has a certificate in Chemical Technology from Essex County College and hazardous waste training from Rutgers.
Shawn Lee www.teresashawncorp.com
This document summarizes Shawn Lee's objective of obtaining a scientific position utilizing his training and knowledge in areas like pharmaceutical quality control, research and development, and manufacturing. It lists his technical skills in chromatography, spectroscopy, and immunoassay. It then summarizes his work experience from 1989 to present in analytical roles for companies like Johnson & Johnson, Organon, and Roche, involving tasks like method development, validation, out of specification investigations, and computer systems.
Wagdy Sous Resume'
Wagdy Sous is a quality control professional with over 15 years of experience in chemistry analysis, quality assurance, and R&D. He has held roles at several companies developing new products, improving quality, reducing costs, and ensuring regulatory compliance. Sous has a bachelor's degree in chemistry and is a member of the American Chemical Society and Egyptian Scientist's Society.
Basis Validation of Biomanufacturing Processes
This document discusses validation of pharmaceutical manufacturing processes. It defines validation as proving a system, facility, equipment, or method is consistently doing what it is intended to do and is under control. Validation is required by Good Manufacturing Practices to ensure quality and safety. Critical operations like sterilization, viral filtration, and cleaning procedures must be validated through scientific studies. The document outlines regulatory requirements and guidance for validation from agencies like FDA and ICH.
Leeder Analytical Air Bro V6
Leeder Analytical offers a range of air testing services including environmental contamination testing, occupational hygiene testing, and emission testing. They have a purpose-built laboratory and highly experienced staff. They can test for organic and inorganic contaminants using standard methods like EPA and customize methods for specific projects. Testing areas include environmental contamination, occupational health and safety, and emissions.
Commercializing antibody-drug conjugates: a CMO’s journey
Watch the webinar here: https://bit.ly/2YLDzTE
This webinar will take you through the story of a CMO preparing for the manufacture of a Commercial Antibody Drug Conjugate (ADC).
Join us to learn about how we grew as a CMO to develop a Commercial ADC program. We will walk through the full timeline from development, process risk assessment and control strategy development and validation, finishing off with preparation for a Commercial ADC Pre-Approval Inspection Audit.
In this webinar you will learn how to:
• Properly structure your development work
• Perform a thorough process risk assessment
• Prepare for pre-approval inspection
instrument validation
the detail instrument validation about Autoclave there URS,DQ,IQ,OQ,PQ,revalidation and its documentation.
Handling of Refernce Standards_Dr.A.Amsavel
Definition
Requirements
Guidelines
Pharmacopiea
Types of Reference Standards
SOP for handling of Reference Standards
Qualification of Secondary Standards
Assigning Potency, Storage and Use
Documents & Records
Validation 2
This document discusses validation of analytical methods and instruments. It begins by introducing the author and providing an outline of topics to be covered, including introduction, types of validation, need for validation, selection of analytical methods, validation parameters, validation process steps, and documentation. It then provides details on each of these topics, describing prospective, concurrent, and retrospective validation types and revalidation. It discusses the need for validation from quality, economic, and regulatory perspectives. It outlines parameters for selecting analytical methods and lists typical validation parameters like accuracy, precision, specificity, linearity, range, and more. It provides steps for the validation process and emphasizes the importance of documentation. The document discusses qualification, aspects of validation, advantages of validation services, and
Sikandar CV2
The document is a resume for Sikandar Hayat detailing his career objective and professional experience in quality control and laboratory roles. Over the past 10 years, he has worked in quality control and laboratory management positions for several chemical and pharmaceutical companies. His responsibilities have included analyzing raw materials and finished products, compiling reports, ensuring compliance with good manufacturing practices, and training new employees. He has extensive experience with laboratory instruments and analytical techniques.
ICH & WHO GUIDELINES ON validation
The document provides guidelines on validation of analytical procedures from the International Conference on Harmonisation (ICH) and the World Health Organization (WHO). It discusses validation characteristics like accuracy, precision, specificity, linearity, range, detection limit and quantitation limit that should be considered when validating identification tests, assays, and tests for impurities. It provides definitions for key terms and recommendations on how validation of these characteristics should be performed.
F sterility failure
It is difficult to maintain the sterility and It is more difficult to investigate when the status is Non sterile. So this ppt narrate the way for you to investigate the Non sterility.
Resume
Jordan Sedlock seeks a position in quality control or analytical chemistry. He has a B.S. in Environmental Chemistry from Towson University and over 5 years of experience in quality control laboratories. His experience includes performing assays, analyses, and tests on products and samples to ensure quality. He is proficient in various instruments and software and has maintained safe and compliant work environments.
Fast-track solutions to address challenges with Host Cell Proteins in early d...
Watch this webinar here: https://bit.ly/3fFRXDb
This webinar illustrates a customer case study about the challenges related to the removal of Host Cell Proteins from bioreactor harvest, the selected fast-track approach and outcome.
Our customer had one month to reduce the level of HCPs in the bioreactor harvest prior to a production run to supply drug substance for a scheduled Phase 1 clinical trial. The high level of HCPs (1,000,000 in the harvest and 700 ppm at the end of purification) unfavorably impacted the planned clarification process and subsequent downstream steps.
The goal was to reduce the level of HCPs to maximum of 300 ppm at the end of process purification and ensure clarification of the entire 2000L harvest.
In this webinar, you will learn about:
- Challenges with Host Cell Proteins
- Fast-Track Approach using caprylic acid precipitation followed by filtration using Clarisolve® filters
- The impact of Design of Experiment
Extractables profiles for chromatography resins - adapted approach of upcomin...
Watch the webinar here: https://bit.ly/36JaZpx
In biopharmaceutical industry there is a trend towards comprehensive risk assessments of drug manufacturing processes. Extractables studies for chromatography resins based on the adapted requirements of the upcoming USP <665> support risk evaluation for your specific chromatography steps.
In this webinar, you will learn about:
- Study design for extractables profiles of chromatography resins
- The new category Emprove® Chromatography
- Communication of extractables data as part of Emprove® Dossiers
Description:
Detailed information on any component or material in contact with the drug substance/ product is required to conduct a compreshensive risk assessment of a biopharmaceutical manufacturing process. No explicit guidelines providing required testing procedures for chromatography steps are in place yet. In the upcoming USP <665> chapter chromatography steps are in focus as well as any other plastic or polymeric component and can as such assessed as to the described criteria. To support our chromatography resin users an adapted extractables study approach was developed. The webinar will demonstrate our study design and the communication of the extractables profiles within our Emprove® Program.
U.D.6 Enfermedades infecciosas
Este documento describe las enfermedades transmisibles y los agentes que las causan. Explica que las enfermedades infecciosas son transmitidas por microorganismos como virus, bacterias, hongos y protozoos. Describe la cadena epidemiológica que explica cómo se transmite una enfermedad, incluyendo el reservorio, mecanismo de transmisión y huésped susceptible. Además, proporciona detalles sobre los diferentes tipos de microorganismos patógenos y sus mecanismos de acción.
Anexo 19 español
Este documento presenta las normas y métodos recomendados internacionales para la gestión de la seguridad operacional contenidos en el Anexo 19 al Convenio sobre Aviación Civil Internacional. El Anexo 19 establece las responsabilidades funcionales estatales y los procesos para la gestión de la seguridad operacional por parte de los Estados, incluidos los programas estatales de seguridad operacional y los sistemas de gestión de la seguridad operacional.
Guía 2 noveno Ingeniería genética
Este documento presenta información sobre ingeniería genética y sus aplicaciones. Brevemente describe cómo la ingeniería genética permite modificar el ADN de organismos vivos, incluidos humanos, y sus usos potenciales en salud, agricultura y producción animal. También discute riesgos éticos como la clonación humana y experimentación con embriones, así como riesgos ambientales y de sanidad relacionados con organismos genéticamente modificados.
2 sp demografia san isidro
El documento presenta un análisis demográfico del municipio de San Isidro en Buenos Aires. La población aumentó de 291,505 habitantes en 2001 a 308,561 en 2010. Las tasas demográficas como natalidad, mortalidad y fecundidad se calcularon usando datos del censo de 2010. La pirámide poblacional muestra un tipo "regresivo" pero equilibrado, propio de una población desarrollada con bajas tasas de natalidad.
Toxicologia, sindrome neurolettico maligno
Este documento describe el síndrome neuroléptico maligno (SNM), una reacción adversa potencialmente mortal a medicamentos neurolépticos. El SNM se caracteriza por rigidez muscular, fiebre alta, alteraciones de la conciencia e inestabilidad autonómica. Se cree que involucra una alteración del sistema dopaminérgico central. El tratamiento incluye suspender el fármaco causante, medidas de soporte y terapia farmacológica con bromocriptina y dantroleno para aliviar los síntomas.
Dimensional analysis
This document provides an overview of dimensional analysis, which is a technique used in engineering to relate physical quantities that influence a system. It describes how dimensional analysis identifies the relevant variables and forms dimensionless groups of variables. An example is provided to illustrate how dimensional analysis can be used to determine the unknown powers in an equation relating the force on a propeller blade to variables like its diameter, velocity, fluid density, and viscosity. Buckingham's pi theorems are explained as providing the theoretical basis for dimensional analysis.
Aula 4-espectrometria-uv-vis-parte-2
O documento descreve técnicas espectrofotométricas para análise quantitativa, incluindo registro de espectros, fixação de comprimento de onda, cinética, curva de calibração, método da adição de padrão e pontos isosbéticos. Aplicações incluem análise de misturas, íons em amostras ambientais e titulações espectrofotométricas.
More Related Content
What's hot
Wagdy Sous Resume'
Wagdy Sous is a quality control professional with over 15 years of experience in chemistry analysis, quality assurance, and R&D. He has held roles at several companies developing new products, improving quality, reducing costs, and ensuring regulatory compliance. Sous has a bachelor's degree in chemistry and is a member of the American Chemical Society and Egyptian Scientist's Society.
Basis Validation of Biomanufacturing Processes
This document discusses validation of pharmaceutical manufacturing processes. It defines validation as proving a system, facility, equipment, or method is consistently doing what it is intended to do and is under control. Validation is required by Good Manufacturing Practices to ensure quality and safety. Critical operations like sterilization, viral filtration, and cleaning procedures must be validated through scientific studies. The document outlines regulatory requirements and guidance for validation from agencies like FDA and ICH.
Leeder Analytical Air Bro V6
Leeder Analytical offers a range of air testing services including environmental contamination testing, occupational hygiene testing, and emission testing. They have a purpose-built laboratory and highly experienced staff. They can test for organic and inorganic contaminants using standard methods like EPA and customize methods for specific projects. Testing areas include environmental contamination, occupational health and safety, and emissions.
Commercializing antibody-drug conjugates: a CMO’s journey
Watch the webinar here: https://bit.ly/2YLDzTE
This webinar will take you through the story of a CMO preparing for the manufacture of a Commercial Antibody Drug Conjugate (ADC).
Join us to learn about how we grew as a CMO to develop a Commercial ADC program. We will walk through the full timeline from development, process risk assessment and control strategy development and validation, finishing off with preparation for a Commercial ADC Pre-Approval Inspection Audit.
In this webinar you will learn how to:
• Properly structure your development work
• Perform a thorough process risk assessment
• Prepare for pre-approval inspection
instrument validation
the detail instrument validation about Autoclave there URS,DQ,IQ,OQ,PQ,revalidation and its documentation.
Handling of Refernce Standards_Dr.A.Amsavel
Definition
Requirements
Guidelines
Pharmacopiea
Types of Reference Standards
SOP for handling of Reference Standards
Qualification of Secondary Standards
Assigning Potency, Storage and Use
Documents & Records
Validation 2
This document discusses validation of analytical methods and instruments. It begins by introducing the author and providing an outline of topics to be covered, including introduction, types of validation, need for validation, selection of analytical methods, validation parameters, validation process steps, and documentation. It then provides details on each of these topics, describing prospective, concurrent, and retrospective validation types and revalidation. It discusses the need for validation from quality, economic, and regulatory perspectives. It outlines parameters for selecting analytical methods and lists typical validation parameters like accuracy, precision, specificity, linearity, range, and more. It provides steps for the validation process and emphasizes the importance of documentation. The document discusses qualification, aspects of validation, advantages of validation services, and
Sikandar CV2
The document is a resume for Sikandar Hayat detailing his career objective and professional experience in quality control and laboratory roles. Over the past 10 years, he has worked in quality control and laboratory management positions for several chemical and pharmaceutical companies. His responsibilities have included analyzing raw materials and finished products, compiling reports, ensuring compliance with good manufacturing practices, and training new employees. He has extensive experience with laboratory instruments and analytical techniques.
ICH & WHO GUIDELINES ON validation
The document provides guidelines on validation of analytical procedures from the International Conference on Harmonisation (ICH) and the World Health Organization (WHO). It discusses validation characteristics like accuracy, precision, specificity, linearity, range, detection limit and quantitation limit that should be considered when validating identification tests, assays, and tests for impurities. It provides definitions for key terms and recommendations on how validation of these characteristics should be performed.
F sterility failure
It is difficult to maintain the sterility and It is more difficult to investigate when the status is Non sterile. So this ppt narrate the way for you to investigate the Non sterility.
Resume
Jordan Sedlock seeks a position in quality control or analytical chemistry. He has a B.S. in Environmental Chemistry from Towson University and over 5 years of experience in quality control laboratories. His experience includes performing assays, analyses, and tests on products and samples to ensure quality. He is proficient in various instruments and software and has maintained safe and compliant work environments.
Fast-track solutions to address challenges with Host Cell Proteins in early d...
Watch this webinar here: https://bit.ly/3fFRXDb
This webinar illustrates a customer case study about the challenges related to the removal of Host Cell Proteins from bioreactor harvest, the selected fast-track approach and outcome.
Our customer had one month to reduce the level of HCPs in the bioreactor harvest prior to a production run to supply drug substance for a scheduled Phase 1 clinical trial. The high level of HCPs (1,000,000 in the harvest and 700 ppm at the end of purification) unfavorably impacted the planned clarification process and subsequent downstream steps.
The goal was to reduce the level of HCPs to maximum of 300 ppm at the end of process purification and ensure clarification of the entire 2000L harvest.
In this webinar, you will learn about:
- Challenges with Host Cell Proteins
- Fast-Track Approach using caprylic acid precipitation followed by filtration using Clarisolve® filters
- The impact of Design of Experiment
Extractables profiles for chromatography resins - adapted approach of upcomin...
Watch the webinar here: https://bit.ly/36JaZpx
In biopharmaceutical industry there is a trend towards comprehensive risk assessments of drug manufacturing processes. Extractables studies for chromatography resins based on the adapted requirements of the upcoming USP <665> support risk evaluation for your specific chromatography steps.
In this webinar, you will learn about:
- Study design for extractables profiles of chromatography resins
- The new category Emprove® Chromatography
- Communication of extractables data as part of Emprove® Dossiers
Description:
Detailed information on any component or material in contact with the drug substance/ product is required to conduct a compreshensive risk assessment of a biopharmaceutical manufacturing process. No explicit guidelines providing required testing procedures for chromatography steps are in place yet. In the upcoming USP <665> chapter chromatography steps are in focus as well as any other plastic or polymeric component and can as such assessed as to the described criteria. To support our chromatography resin users an adapted extractables study approach was developed. The webinar will demonstrate our study design and the communication of the extractables profiles within our Emprove® Program.
What's hot (13)
Commercializing antibody-drug conjugates: a CMO’s journey
Commercializing antibody-drug conjugates: a CMO’s journey
Fast-track solutions to address challenges with Host Cell Proteins in early d...
Fast-track solutions to address challenges with Host Cell Proteins in early d...
Extractables profiles for chromatography resins - adapted approach of upcomin...
Extractables profiles for chromatography resins - adapted approach of upcomin...
Viewers also liked
U.D.6 Enfermedades infecciosas
Este documento describe las enfermedades transmisibles y los agentes que las causan. Explica que las enfermedades infecciosas son transmitidas por microorganismos como virus, bacterias, hongos y protozoos. Describe la cadena epidemiológica que explica cómo se transmite una enfermedad, incluyendo el reservorio, mecanismo de transmisión y huésped susceptible. Además, proporciona detalles sobre los diferentes tipos de microorganismos patógenos y sus mecanismos de acción.
Anexo 19 español
Este documento presenta las normas y métodos recomendados internacionales para la gestión de la seguridad operacional contenidos en el Anexo 19 al Convenio sobre Aviación Civil Internacional. El Anexo 19 establece las responsabilidades funcionales estatales y los procesos para la gestión de la seguridad operacional por parte de los Estados, incluidos los programas estatales de seguridad operacional y los sistemas de gestión de la seguridad operacional.
Guía 2 noveno Ingeniería genética
Este documento presenta información sobre ingeniería genética y sus aplicaciones. Brevemente describe cómo la ingeniería genética permite modificar el ADN de organismos vivos, incluidos humanos, y sus usos potenciales en salud, agricultura y producción animal. También discute riesgos éticos como la clonación humana y experimentación con embriones, así como riesgos ambientales y de sanidad relacionados con organismos genéticamente modificados.
2 sp demografia san isidro
El documento presenta un análisis demográfico del municipio de San Isidro en Buenos Aires. La población aumentó de 291,505 habitantes en 2001 a 308,561 en 2010. Las tasas demográficas como natalidad, mortalidad y fecundidad se calcularon usando datos del censo de 2010. La pirámide poblacional muestra un tipo "regresivo" pero equilibrado, propio de una población desarrollada con bajas tasas de natalidad.
Toxicologia, sindrome neurolettico maligno
Este documento describe el síndrome neuroléptico maligno (SNM), una reacción adversa potencialmente mortal a medicamentos neurolépticos. El SNM se caracteriza por rigidez muscular, fiebre alta, alteraciones de la conciencia e inestabilidad autonómica. Se cree que involucra una alteración del sistema dopaminérgico central. El tratamiento incluye suspender el fármaco causante, medidas de soporte y terapia farmacológica con bromocriptina y dantroleno para aliviar los síntomas.
Dimensional analysis
This document provides an overview of dimensional analysis, which is a technique used in engineering to relate physical quantities that influence a system. It describes how dimensional analysis identifies the relevant variables and forms dimensionless groups of variables. An example is provided to illustrate how dimensional analysis can be used to determine the unknown powers in an equation relating the force on a propeller blade to variables like its diameter, velocity, fluid density, and viscosity. Buckingham's pi theorems are explained as providing the theoretical basis for dimensional analysis.
Aula 4-espectrometria-uv-vis-parte-2
O documento descreve técnicas espectrofotométricas para análise quantitativa, incluindo registro de espectros, fixação de comprimento de onda, cinética, curva de calibração, método da adição de padrão e pontos isosbéticos. Aplicações incluem análise de misturas, íons em amostras ambientais e titulações espectrofotométricas.
Trabajo de geometria
El documento explica los sistemas de coordenadas polares, esféricas y geográficas. Las coordenadas polares usan la distancia y ángulo polar para especificar la posición de un punto. Las coordenadas geográficas usan latitud y longitud para ubicar puntos en la Tierra. El documento también proporciona ejemplos de conversiones entre coordenadas cartesianas y polares.
Viewers also liked (10)
Similar to Certificate 63845 quartz
FuelCellEurope RCS Workshop
This document summarizes ITM Power's involvement in regulatory compliance and standards. It discusses ITM Power achieving ISO accreditation and CE marking for its electrolyzer systems. It also describes ITM Power's participation in the Hydrogen On Site Trials program to demonstrate hydrogen refueling and test fuel cell vehicles at 21 locations in the UK. The document provides details on standards for hydrogen purity, electrolyzer certification, and ITM Power's engagement with working groups developing hydrogen standards.
Laboratory role in petroleum industry
The document discusses the role of laboratories in the petroleum industry. It outlines how laboratories ensure quality control through routine testing of raw materials, process streams, and finished products. This includes testing properties like density, salt content, water content, viscosity, sulfur content, and metals content. Laboratories also perform troubleshooting, process optimization, and product certification activities. Their work is important for monitoring performance, ensuring product specifications are met, and solving quality problems.
UN TDG Corrosion to Metals
This presentation discusses the laboratory test method UN Manual of Tests and Criteria, Part III, Section 37.1 - Corrosion to Metals.
Dell Tech is an ISO 17025 accredited laboratory that can test your product for corrosion to metals. Contact Dell Tech today to schedule testing for your product.
Environmental competence criteria iso 17021 2 techical spec
ISO 17021-2-TS 2012
Competency evaluation tool for certification bodies
Sample only
Will be shortly be available for purchase via www.complianceresourcelibrary.co.uk
DuPont Surfaces Contributing to Sustainable Design
DuPont™ Corian® solid surfaces contribute to the sustainable design goals of a variety of commercial and residential applications. Suitable for both horizontal and vertical applications, Corian® solid surfaces and Zodiaq®quartz surfaces combine beauty and performance with a range of environmental benefits.
Certificado BBA - Aislamiento Synthesia para cubiertas
Agrément Certificate 15/5243 Product Sheet 1. APPROVAL INSPECTION TESTING CERTIFICATION. TECHNICAL APPROVALS FOR CONSTRUCTION
Brownfield Briefing Ra 2008 Presentation Mfc
Presentation focuses on the application of RBCA within the UK legislative context and presented in Annual Brownfield Briefing Risk Assessment 2008
CH2M July 2015 Environmental Regulatory UPdate
The document provides a summary of various U.S. regulatory updates from July 2015 affecting different regulatory areas including air, natural resources, ozone depleting substances, and underground storage tanks. It outlines new or proposed rules on topics such as greenhouse gas emissions from aircraft, methane emissions from the oil and gas industry, amendments to standards for hazardous air pollutants, and changes to the endangered species list. The summary is intended to communicate regulatory changes to help clients comply with environmental regulations.
Hydrogen Impacts on Downstream Installations.pptx
In December 2018, the Council of Australian Governments (COAG) Energy Council committed to a vision of making Australia a major player in a global hydrogen industry by 2030. As early steps to achieving this vision, the COAG Energy Council has committed to:
• Develop and implement a national strategy for hydrogen, in close consultation with industry and the community, known as the National Hydrogen Strategy (NHS), and
• Deliver the three kickstart projects in partnership with industry and the community.
The COAG Energy Council approved a high-level work plan and established the Hydrogen Working Group. The key milestones under the work plan included the development of a draft strategy for consideration by Ministers, followed by submission of the final strategy to COAG.
The COAG Energy Council kickstart project under the National Hydrogen Strategy (NHS) Gas in the distribution network work stream, prepared by GPA Engineering, led by the South Australian Government in conjunction with the Future Fuels CRC, issued a report on the “technical and regulatory barriers of up to 10% of hydrogen by volume blend in the natural gas distribution network”. The physical limit of this study was from the metered hydrogen injection point and metered blended offtake from gas distribution networks. The study assessed some of the likely technical impacts on end users of blending of up to 10% hydrogen by volume in the gas distribution network. The study also aimed to identify barriers in the current Australian Standards for adoption of up to 10% hydrogen by volume.
One of the key recommendations from this initial work was to complete a review of the technical and regulatory impacts to end users of up to 10% hydrogen in the natural gas distribution network downstream of the consumer billing meter.
Certificado BBA - Aislamiento con productos Synthesia para suelos
The document provides technical information on Synthesia's range of insulation for floors. It includes:
1) Details on the manufacturing process and quality control procedures.
2) Descriptions of the products and their intended uses for suspended timber and concrete floors.
3) Guidance on design considerations such as ventilation requirements, overlay materials, and thermal performance calculations.
4) Tables showing example constructions for timber ground floors and their required insulation thicknesses to achieve various target U-values.
Korea certification labaratory
When you want to export your product in Korea, you need to get KC certification.
Here is the my company profile.
Our company provide the testing & certification services for electrical & electronic products.
As a KOLAS designated laboratory, we will best service for you to make your profit.
Dura Clear 2000 Biodegradable
EDC2 is a strong, biodegradable polyethylene film that is ideal for multiple applications as a cost-effective alternative to other biodegradable films. It contains an additive that causes it to biodegrade in landfills or composting conditions within 1-5 years, while maintaining performance and shelf life until exposure. EDC2 biodegrades in both oxygenated and non-oxygenated conditions and is also fully recyclable. It offers good clarity, strength and is available in a variety of thickness for automotive, medical, food, retail and craft applications.
Graphite 52 m mcerts certificate
This document certifies that the Graphite 52M FID Analyser manufactured by Environnement SA has been assessed and found to comply with specific performance standards for continuous emissions monitoring systems. The certificate provides details on the certification tests performed on the analyser, the certified measurement ranges and performance criteria it meets, as well as application and use guidelines.
Environmental Product Declaration 2023.pptx
This document covers PVC and PVCO pressure pipe for potable water, reuse water, and sanitary force main systems; and PVC nonpressure pipe for gravity storm water and sanitary sewer systems. All pipes are made in lengths that are assembled at the job site. Each length has a belled end with a elastomeric gasket such that each pipe length’s spigot end fits inside the belled end of the next pipe length.
Parker Kittiwake Corporate Presentation
Kittiwake is a leading manufacturer of products that monitor and manage lubrication, fuel, gas, machinery, and marine water for assets. They provide solutions for oil sampling, fuel sampling, lube testing kits, marine water testing kits, laboratory equipment, online condition monitoring sensors, FTIR analysis, acoustic emissions monitoring, and emissions monitoring. Kittiwake has a global presence with customers in marine, industrial, renewable energy, offshore, power and food manufacturing. They invest over 10% of turnover back into R&D to develop innovative new products and technologies.
LIQUEFIED PETROLEUM GAS INSTALLATION
This document provides general specifications for liquefied petroleum gas (LPG) installations in government buildings in Hong Kong. It covers the scope, statutory obligations, execution requirements, drawings and manuals, general installation requirements, technical requirements, inspection/testing/commissioning, and maintenance. The specifications were developed by the Architectural Services Department based on the 2007 edition to incorporate updated standards and technologies. The document aims to ensure safety, quality and compliance with local regulations for LPG installations.
LIQUEFIED PETROLEUM GAS INSTALLATION
This document provides general specifications for liquefied petroleum gas (LPG) installations in government buildings in Hong Kong. It covers the scope, statutory obligations, execution requirements, drawings and manuals, general installation requirements, technical requirements, inspection/testing/commissioning, and maintenance. The specifications were developed by the Architectural Services Department based on the 2007 edition to incorporate updated standards and technologies. The document aims to ensure safety, quality and compliance with local regulations for LPG installations.
Astme84 ulcs102.2
UL 723 (ASTM E84) and ULC S102.2 are two different test methods for measuring the surface burning characteristics of building materials. While both methods use the same Steiner Tunnel apparatus, they have different sample mounting procedures which can result in different flame spread and smoke developed index values. ULC S102.2 is designed to test materials mounted in both ceiling and floor positions, whereas UL 723 only tests in the ceiling position. U.S. building codes require materials used in air-handling spaces to have a flame spread index of 25 or less and a smoke developed index of 50 or less when tested by UL 723. The document cautions that assuming compliance based on ULC S102.2
Life Cycle Assessment of An Air Freshener
This document provides a life cycle assessment of an air freshener produced by OMI Industries. It summarizes the goal of quantifying the environmental impacts of the product and identifying high impact processes. The functional unit is 1000kg of gel. Key processes include essential oil production, surfactant manufacture, and product assembly. Transportation of materials and electricity usage during production contribute significantly to global warming potential. The study was limited by a lack of data on upstream and downstream processes.
Kcg Qc Mod2 Standardization
Presentation on the organization of standardization in the building sector, with special attention to standards on building facades
Similar to Certificate 63845 quartz (20)
Environmental competence criteria iso 17021 2 techical spec
Environmental competence criteria iso 17021 2 techical spec
DuPont Surfaces Contributing to Sustainable Design
DuPont Surfaces Contributing to Sustainable Design
Certificado BBA - Aislamiento Synthesia para cubiertas
Certificado BBA - Aislamiento Synthesia para cubiertas
Certificado BBA - Aislamiento con productos Synthesia para suelos
Certificado BBA - Aislamiento con productos Synthesia para suelos
More from Marble Concepts
Nebula code-es-en-pt-se
We know that nature is infinite,
something that is impossible to
reproduce. In Silestone, it is our
constant source of inspiration as a
unique and perfect representation of
what we try to offer our customers.
Healthcare applications-en
Silestone quartz surfaces are so versitile that they can be used in a variety of applications. It is the ideal product for different public healthcare spaces.
Bathroom collection-en
Bathroom Collection by Cosentino is a unique concept in the
architectural sector, based on the use of single materials
that offer superior performance and remarkable beauty.
Silestone Cosentino’s Environmental Commitment
Cosentino is committed to respect, prevent, and control our environment in all of our production
processes from the extraction and transformation to the distribution of our products;
to accomplish this, we are investing in the best technology to preserve
our most direct surroundings to favor the environment.
Silestone Architectual brochure
This document provides information about Silestone quartz countertop surfaces, including an overview of the product, specifications, certifications, colors and sizes available. Some key details include:
- Silestone is a natural quartz surface made of 93% natural quartz and 7% other materials that provides durable, non-porous performance.
- It is exclusively manufactured by Cosentino, which has over 70 years of experience in the stone industry, and is available through a nationwide network.
- Silestone has various certifications and passes material performance tests. It is the only countertop material with built-in Microban antimicrobial protection.
- Over 60 colors are available in
SILESTONE® QUICK REFERENCE GUIDE
Silestone is the only countertop with built-in Microban
protection that safely fights the growth of microbes such
as odor-causing bacteria, mold and mildew 24/7 for the
life of the product. While Microban does not protect
against foodborne illness and is not a substitute for
normal cleaning practices, it does make Silestone easier
to clean and keep clean.
YOUR DESTINATION FOR LUXURY STONE
Silestone’s nearly indestructible surface is stain, scorch and
scratch resistant. With a very low absorption index and a minimal
number of joints, Silestone is perfect for spaces where liquid
exists. Silestone is resistant and continues to be enjoyed over
time, going beyond the surface.
Material Data Safety Sheet
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against developing mental illness and improve symptoms for those who already suffer from conditions like anxiety and depression.
THE POWER OF QUARTZ AT YOUR SERVICE
Bacteriostatic protection.
Silestone® is the only brand that includes an
active hygiene system in its composition.
We have developed a protective system that
prevents a large number of bacteria from
spreading.
Thus, Silestone® kitchen worktops and
bathrooms, offer safety and tranquillity for
your household as added-value.
Nébula Alpha series
One step further. The Nébula Alpha series presents
a new range of colours inspired by life on Earth, by
the unexpected beauty of nature; so, deep and
balanced.
Silestone Maintenance use-en
Silestone® and ECO Line Colour Series are low
porous surfaces and therefore highly resistant to
everyday domestic stains. For regular cleaning
of Silestone® or ECO Line Colour Series surfaces,
Cosentino S.A. recommends you use Q-Action. If
Q-Action is not available, water and mild/neutral
soap is the best option for regular cleaning.
Kitchen bath-en
A genuine “authentic” life starts in our home, which is a reflection of our own personality and
experience. The human dimension is what turns our house into our home. It is a way of living
constructed over time. It is the result of our actions, our decisions and our experiences.
Silestone Good practices guide
For the safe fabrication of Silestone®,
Dekton®, ECO, Sensa, Scalea,
Integrity & Prexury by Cosentino®
Caesarstone Statuario Maximus
Caesarstone's newest marble inspired design features broad warm grey veins sweeping across its soft white base color, further enriched be delicate background veins.
Caesarstone Nature Inspired Brochure
Design freedom.
Endless possibilities.
Combining the beauty and strength of quartz – one of
nature’s strongest minerals, Caesarstone® quartz surfaces
retain the cool, tactile qualities of natural stone yet are
resistant to stains, scratches and are easy to clean.
Caesarstone Brochure
A perfect surface is like the icing on a cake.
It is the final touch, your own personal
signature. With Caesarstone’s vast array of
colors, styles and motifs you are sure to find
your perfect design. Whether for the kitchen,
bathroom, or any space you can envision,
there is a Caesarstone surface that meets the
highest standards of quality while inspiring
creativity.
Hanstone Company Brochure
HanStone Quartz offers the natural beauty of quartz with up to six times the strength
and durability of granite. More than 90% of HanStone Quartz is mined quartz crystals,
one of nature’s hardest materials, ranking a 7 out of 10 on the Mohs Hardness scale. The
quartz is combined with polyester resins and pigments to create the look of natural stone
without the high maintenance. There’s no need for sealing, conditioning and polishing.
HanStone Brochure
Meet HanStone’s state-of-the-art quartz surfaces made of natural quartz — one of nature’s strongest materials. Offering beauty tough enough to stand up to everyday life. With classic hues and beautiful movements, HanStone Quartz celebrates the natural world around us, while being on trend and appealing for all interior aspirations.
HanStone Fabrication Manual
We all want beautiful things. And at Hanwha Surfaces, a division of
Hanwha L&C, we want to make things beautiful. That means dealing
with the concept and delivery of perfection. Since 1952, Hanwha has been
innovating materials and designing surfacing solutions with the perfect
blend of beauty, elegance and functionality. Today, Hanwha Surfaces
delivers the industry’s most comprehensive quartz and solid surfacing
solutions – with unequalled consistency of color, texture and quality.
In a world where everything moves so fast, Hanwha Surfaces makes the
time to sweat the small stuff, pay attention to the details and understand
what it takes to deliver something magical, something perfect.
Cambria quartz-brochure
This document describes Cambria quartz surfaces. It highlights their natural beauty, with warm tones and variations found in nature. Cambria surfaces are described as having superior performance, strength, and food safety compared to granite. The document provides an overview of Cambria's quarry collection colors and notes that variations in quartz are inherent in the natural material.
More from Marble Concepts (20)
Recently uploaded
SVN Live 6.10.24 Weekly Property Broadcast
The SVN® organization shares a portion of their new weekly listings via their SVN Live® Weekly Property Broadcast. Visit https://svn.com/svn-live/ if you would like to attend our weekly call, which we open up to the brokerage community.
制作(ucr毕业证书)加州大学河滨分校毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【(ucr毕业证书)加州大学河滨分校毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Serviced Apartment Ho Chi Minh For Rental
GVRenting is the leading rental real estate company in Vietnam. We help you to find a serviced apartment for rent in Ho Chi Minh & Saigon. Discover our broad range of rental properties in Vietnam.
For more details https://gvrenting.com/
Victory by Maskeen Group Surrey Floor plans June 2024 PDF
Victory by Maskeen Group Surrey Floor plans June 2024 PDF.
Recent Trends Fueling The Surge in Farmhouse Demand in India
Embarking on the journey to acquire a farmhouse for sale is just the beginning; the real investment lies in crafting an environment that contributes to our mental and physical well-being while satisfying the soul. At Farmlandbazaar.com, India’s leading online marketplace dedicated to farm land, farmhouses, and agricultural lands, we understand the importance of transforming a humble farmland into a warm and inviting sanctuary. Let's explore the fundamental aspects that can elevate your farmhouse into a tranquil haven.
原版制作(Greenwich毕业证书)格林威治大学毕业证PDF成绩单一模一样
学校原件一模一样【微信：741003700 】《(Greenwich毕业证书)格林威治大学毕业证PDF成绩单》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Listing Turkey - Yeni Eyupevleri Istanbul
Discover Yeni Eyup Evleri 2, nestled among the rising values of Eyupsultan, offering the epitome of modern living in Istanbul.
With its spacious living areas, contemporary architecture, and meticulous details, Yeni Eyup Evleri 2 is poised to be the star of your happiest moments. Situated in the new favorite district of Eyupsultan, claim your spot and unlock the doors to a peaceful life alongside your loved ones. Nestled next to the historical and natural beauties of Eyupsultan, embrace the comfort of modern living and rediscover life.
Social Amenities:
Yeni Eyup 2 offers a life filled with joy with its green landscaping areas, gym, sauna, children’s play areas, café, outdoor pool, and basketball court. Reserve your place for unforgettable moments!
Reliable Structure:
With 1+1, 2+1, and 3+1 apartment options, Yeni Eyup Evleri 2 is designed with first-class materials and craftsmanship. The doors to a safe and comfortable life are here! Choose the option that suits you best and step into your dream home.
Project:
Yeni Eyup 2 is conveniently located, with Istanbul Airport just 26 minutes away, the Mecidiyeköy Metro Line 4 minutes away, and the Tram Stop 5 minutes away, making your life easier with its central location.
Location:
Your home is positioned in a privileged location, providing easy access to the city center, shopping malls, restaurants, schools, and other important places.
Yeni Eyup 2 offers 1+1, 2+1, and 3+1 apartment options designed to meet different needs. Find an option suitable for every lifestyle and open the doors to a comfortable life in your dream home.
https://listingturkey.com/property/yeni-eyup-evleri-2/
AVRUPA KONUTLARI ESENTEPE - ENGLISH - Listing Turkey
Looking for a new home in Istanbul? Look no further than Avrupa Konutlari Esentepe! Our beautifully designed homes provide the perfect blend of luxury and comfort, making them the perfect choice for anyone looking for a high-quality home in the city.
With a wide range of apartment types available, from 1+1 to 4+1, we have something to suit every need and budget. Each apartment is designed with attention to detail and features spacious and bright living areas, making them the perfect place to relax and unwind after a long day.
One of the things that sets Avrupa Konutlari Esentepe apart from other developments is our focus on creating a community that is both comfortable and convenient. Our homes are surrounded by lush green spaces, perfect for enjoying a peaceful stroll or having a picnic with friends and family. Additionally, our complex includes a variety of social and recreational amenities, such as swimming pools, sports fields, and playgrounds, making it easy for residents to stay active and socialize with their neighbors.
https://listingturkey.com/property/avrupa-konutlari-esentepe/
Things to Consider When Selling Your House - Summer 2024 Edition
If you're thinking about selling your home this summer, make sure you take some time to read this guide so that you understand the market.
BEST FARMLAND FOR SALE | FARM PLOTS NEAR BANGALORE | KANAKAPURA | CHICKKABALP...
BEST FARMLAND FOR SALE | FARM PLOTS NEAR BANGALORE | KANAKAPURA | CHICKKABALP...knox groups real estate
welcome to knox groups real estate company in Bangalore. best farm land for sale near Bangalore and madhugiri . Managed farmland near Kanakapura and Chickkabalapur get know more details about the projects .Knox groups is a leading real estate company dedicated to helping individuals and businesses navigate the dynamic real estate market. With our extensive knowledge, experience, and commitment to excellence, we deliver exceptional results for our clients. Discover the perfect foundation for your agricultural aspirations with KNOX Groups' prime farm lands. These aren't just plots; they're the fertile grounds where vibrant crops flourish, livestock thrives, and unique agricultural ventures come to life. At KNOX, we go beyond selling land we curate sustainable ecosystems, ensuring that your journey toward agricultural success is seamless and prosperous.Gurgaon Industrial Business Association.pdf
Presentation of Industrial Land for development of various business opportunities
Deed 3754 S Honeysuckle Mesa AZ 85212 owner Shawn Freeman - Pamela Brown Nota...
Shawn Tyler Freeman Mesa Arizona - Lawsuit Exhibit - 3754 S Honeysuckle Mesa AZ 85212 - Pamela Brown Notary Arizona
Recently uploaded (15)
Addis Bleaching Mixed use Apartment- Documentation 6.pdf
Addis Bleaching Mixed use Apartment- Documentation 6.pdf
Victory by Maskeen Group Surrey Floor plans June 2024 PDF
Victory by Maskeen Group Surrey Floor plans June 2024 PDF
HollandRow_17x11_Insert_Floorplan_Feature sheet.pdf
HollandRow_17x11_Insert_Floorplan_Feature sheet.pdf
Recent Trends Fueling The Surge in Farmhouse Demand in India
Recent Trends Fueling The Surge in Farmhouse Demand in India
G+10 apartment 1- Sustainable apartment building.pdf
G+10 apartment 1- Sustainable apartment building.pdf
AVRUPA KONUTLARI ESENTEPE - ENGLISH - Listing Turkey
AVRUPA KONUTLARI ESENTEPE - ENGLISH - Listing Turkey
Things to Consider When Selling Your House - Summer 2024 Edition
Things to Consider When Selling Your House - Summer 2024 Edition
BEST FARMLAND FOR SALE | FARM PLOTS NEAR BANGALORE | KANAKAPURA | CHICKKABALP...
BEST FARMLAND FOR SALE | FARM PLOTS NEAR BANGALORE | KANAKAPURA | CHICKKABALP...
Deed 3754 S Honeysuckle Mesa AZ 85212 owner Shawn Freeman - Pamela Brown Nota...
Deed 3754 S Honeysuckle Mesa AZ 85212 owner Shawn Freeman - Pamela Brown Nota...
Certificate 63845 quartz
- 1. Wilsonart LLC Wilsonart® Quartz 63845-420 Certificate Number 06/12/2007 - 03/09/2017 Certificate Period Certified Status Product tested in accordance with UL 2821 test method to show compliance to emission limits on UL 2818. Section 7.1 and 7.2. Building products and Interior finishes are determined compliant in accordance with California Department of Public Health (CDPH) Standard Method V1.1-2010 using the applicable exposure scenario(s). UL 2818 - 2013 Gold Standard for Chemical Emissions for Building Materials, Finishes and Furnishings CERTIFICATE OF COMPLIANCE UL Environment investigated representative samples of the identified Product(s) to the identified Standard(s) or other requirements in accordance with the agreements and any applicable program service terms in place between UL Environment and the Certificate Holder (collectively “Agreement”). The Certificate Holder is authorized to use the UL Environment Mark for the identified Product(s) manufactured at the production site(s) covered by the ULE Test Report, in accordance with the terms of the Agreement. This Certificate is valid for the identified dates unless there is non-compliance with the Agreement.
- 2. GREENGUARD Gold Certification Criteria for Building Products and Interior Finishes Criteria CAS Number Maximum Allowable Predicted Concentration Units TVOC (A) - 0.22 mg/m³ Formaldehyde 50-00-0 9 (7.3 ppb) µg/m³ Total Aldehydes (B) - 0.043 ppm 4-Phenylcyclohexene 4994-16-5 6.5 µg/m³ Particle Matter less than 10 µm (C) - 20 µg/m³ 1-Methyl-2-pyrrolidinone (D) 872-50-4 160 µg/m³ Individual VOCs (E) - 1/2 CREL or 1/100th TLV - (A) Defined to be the total response of measured VOCs falling within the C6 – C16 range, with responses calibrated to a toluene surrogate. (B) The sum of all measured normal aldehydes from formaldehyde through nonanal, plus benzaldehyde, individually calibrated to a compound specific standard. Heptanal through nonanal are measured via TD/GC/MS analysis and the remaining aldehydes are measured using HPLC/UV analysis. (C) Particle emission requirement only applicable to HVAC Duct Products with exposed surface area in air streams (a forced air test with specific test method) and for wood finishing (sanding) systems. (D) Based on the CA Prop 65 Maximum Allowable Dose Level for inhalation of 3,200 g/day and an inhalation rate of 20 m³/day (E) Allowable levels for chemicals not listed are derived from the lower of 1/2 the California Office of Environmental Health Hazard Assessment (OEHHA) Chronic Reference Exposure Level (CREL) as required per the CDPH/EHLB/Standard Method v1.1 and BIFMA level credit 7.6.2 and 1/100th of the Threshold Limit Value (TLV) industrial work place standard (Reference: American Conference of Government Industrial Hygienists, 6500 Glenway, Building D-7, and Cincinnati, OH 45211-4438). UL Environment investigated representative samples of the identified Product(s) to the identified Standard(s) or other requirements in accordance with the agreements and any applicable program service terms in place between UL Environment and the Certificate Holder (collectively “Agreement”). The Certificate Holder is authorized to use the UL Environment Mark for the identified Product(s) manufactured at the production site(s) covered by the ULE Test Report, in accordance with the terms of the Agreement. This Certificate is valid for the identified dates unless there is non-compliance with the Agreement.