This document provides instructions for removing and installing various components on an engine, including the battery, alternator, starting motor, air cleaner, muffler, and expansion tank. The procedures provide step-by-step instructions with illustrations and safety warnings for each component. Removal procedures are listed separately from installation procedures.
Caterpillar cat th580 b telehandler service repair manualudfjdfjjskekemm
This document contains removal and installation procedures for various components of a machine. Sections include the engine, powertrain, vehicle systems, machine components, electrical systems, and troubleshooting. Specific components covered include the battery, alternator, starter motor, air cleaner, muffler, expansion tank, radiator, and related brackets. Detailed steps are provided for draining fluids, disconnecting hoses and electrical connections, removing mounting hardware, and replacing components. Safety notices are included regarding hot or pressurized fluids, electrical hazards, and preventing accidental starting.
Caterpillar cat 951 c track loader (prefix 86j) service repair manual (86j040...ujjfjkskekmme
- The document provides instructions for disassembling and assembling starting motors for Caterpillar track loaders and excavators.
- It describes removing over a dozen individual components of 42-MT, 37-MT and 41-MT series starting motors in step-by-step detail.
- Reassembly instructions are also provided, with an emphasis on applying the proper lubricants to bushings, seals and other parts.
Caterpillar cat 315 c excavator (prefix cjc) service repair manual (cjc00001 ...fjsekdmmeed
The document provides step-by-step instructions for disassembling and assembling the travel motor of 315C and 315C L excavators. It lists 28 steps for disassembly, which include removing bolts, valves, seals, pistons, springs and other components. It then lists 25 steps for reassembly, instructing technicians to clean parts, replace seals, apply lubricants, and reinstall components in reverse order using various tools. Technicians are advised to mark parts for orientation and take precautions when working with pressurized or spring-loaded components.
Case ih mx210 tractor service repair manualdfujsejfskekem
This document is the service manual for the MX Magnum tractor. It provides a table of contents that lists all sections and publications for servicing and repairing the tractor. Safety warnings are also provided, advising technicians to take proper precautions when working on the tractor, including wearing protective equipment, relieving pressure from hydraulic lines before disconnecting, and ensuring the engine is off and the tractor is blocked before performing any maintenance.
Caterpillar cat 349 d excavator (prefix klh) service repair manual (klh00001 ...cdsaas
This document provides instructions for disassembling and assembling a travel motor. It begins with removing external components like plates and seals. It then describes removing the head, brake piston, disks, and rotating group. Components like the shaft, bearings, and pistons are then removed from the rotating group. Reassembly involves reversing these steps and ensuring components like O-rings and washers are properly installed. Precautions are provided to prevent contamination and correctly identify parts.
Caterpillar cat th580 b telehandler service repair manualfusjefjskefkksem
This document provides removal and installation procedures for various components on a machine. It includes sections on removing and installing the battery, alternator, starter motor, air cleaner, muffler, and expansion tank. Detailed steps and illustrations are provided for each procedure. Safety precautions are also provided, such as warnings about hot components, electrical shock, and handling of chemicals.
Caterpillar cat th580 b telehandler service repair manualfjjsekksemmm
This document provides removal and installation procedures for various components on a machine. The components included are the battery, alternator, electric starting motor, air cleaner, muffler, and expansion tank. Detailed step-by-step instructions are provided for safely removing and installing each component, including necessary safety precautions. Illustrations supplement the written instructions to aid in the process.
Caterpillar cat th580 b telehandler service repair manualdujfjjsejkkekm
This document contains removal and installation procedures for various components on a machine, including:
- Battery removal and installation in 3 steps
- Alternator removal and installation in 4 steps
- Starter motor removal and installation in 4 steps
- Air cleaner removal and installation in 5 steps
- Muffler removal and installation in 3 steps
- Expansion tank removal and installation in 6 steps
- Radiator removal involving 12 steps, disassembly in 4 steps, and assembly and installation procedures.
Caterpillar cat th580 b telehandler service repair manualudfjdfjjskekemm
This document contains removal and installation procedures for various components of a machine. Sections include the engine, powertrain, vehicle systems, machine components, electrical systems, and troubleshooting. Specific components covered include the battery, alternator, starter motor, air cleaner, muffler, expansion tank, radiator, and related brackets. Detailed steps are provided for draining fluids, disconnecting hoses and electrical connections, removing mounting hardware, and replacing components. Safety notices are included regarding hot or pressurized fluids, electrical hazards, and preventing accidental starting.
Caterpillar cat 951 c track loader (prefix 86j) service repair manual (86j040...ujjfjkskekmme
- The document provides instructions for disassembling and assembling starting motors for Caterpillar track loaders and excavators.
- It describes removing over a dozen individual components of 42-MT, 37-MT and 41-MT series starting motors in step-by-step detail.
- Reassembly instructions are also provided, with an emphasis on applying the proper lubricants to bushings, seals and other parts.
Caterpillar cat 315 c excavator (prefix cjc) service repair manual (cjc00001 ...fjsekdmmeed
The document provides step-by-step instructions for disassembling and assembling the travel motor of 315C and 315C L excavators. It lists 28 steps for disassembly, which include removing bolts, valves, seals, pistons, springs and other components. It then lists 25 steps for reassembly, instructing technicians to clean parts, replace seals, apply lubricants, and reinstall components in reverse order using various tools. Technicians are advised to mark parts for orientation and take precautions when working with pressurized or spring-loaded components.
Case ih mx210 tractor service repair manualdfujsejfskekem
This document is the service manual for the MX Magnum tractor. It provides a table of contents that lists all sections and publications for servicing and repairing the tractor. Safety warnings are also provided, advising technicians to take proper precautions when working on the tractor, including wearing protective equipment, relieving pressure from hydraulic lines before disconnecting, and ensuring the engine is off and the tractor is blocked before performing any maintenance.
Caterpillar cat 349 d excavator (prefix klh) service repair manual (klh00001 ...cdsaas
This document provides instructions for disassembling and assembling a travel motor. It begins with removing external components like plates and seals. It then describes removing the head, brake piston, disks, and rotating group. Components like the shaft, bearings, and pistons are then removed from the rotating group. Reassembly involves reversing these steps and ensuring components like O-rings and washers are properly installed. Precautions are provided to prevent contamination and correctly identify parts.
Caterpillar cat th580 b telehandler service repair manualfusjefjskefkksem
This document provides removal and installation procedures for various components on a machine. It includes sections on removing and installing the battery, alternator, starter motor, air cleaner, muffler, and expansion tank. Detailed steps and illustrations are provided for each procedure. Safety precautions are also provided, such as warnings about hot components, electrical shock, and handling of chemicals.
Caterpillar cat th580 b telehandler service repair manualfjjsekksemmm
This document provides removal and installation procedures for various components on a machine. The components included are the battery, alternator, electric starting motor, air cleaner, muffler, and expansion tank. Detailed step-by-step instructions are provided for safely removing and installing each component, including necessary safety precautions. Illustrations supplement the written instructions to aid in the process.
Caterpillar cat th580 b telehandler service repair manualdujfjjsejkkekm
This document contains removal and installation procedures for various components on a machine, including:
- Battery removal and installation in 3 steps
- Alternator removal and installation in 4 steps
- Starter motor removal and installation in 4 steps
- Air cleaner removal and installation in 5 steps
- Muffler removal and installation in 3 steps
- Expansion tank removal and installation in 6 steps
- Radiator removal involving 12 steps, disassembly in 4 steps, and assembly and installation procedures.
Caterpillar cat 330 c fm excavator (prefix b1k) service repair manual (b1k000...jdfjskekmdme
This document provides instructions for installing a camshaft on a Caterpillar 330C FM excavator engine. It begins by noting the required tools and removing previous components like the rocker arm shaft and front cover. The camshaft is then removed by loosening bolts while aligning timing marks and lifting it out. Reinstallation requires aligning timing marks, lubricating the camshaft, and tightening bolts to specified torque to complete the job. Proper cleaning and lubrication are emphasized to prevent premature wear.
Caterpillar cat 330 c excavator (prefix rbh) service repair manual (rbh00001 ...jdfjskekmdme
- The document provides instructions for disassembling and assembling the travel motor of a 330C excavator.
- It describes 27 steps to disassemble the travel motor by removing components like the head, springs, plates, and seals.
- It then describes 28 steps for reassembling the travel motor, replacing all seals and installing components in the reverse order of disassembly.
- Special tools are required for tasks like removing bearings and installing retaining rings.
Caterpillar cat 330 c excavator (prefix mkm) service repair manual (mkm00001 ...jdfjskekmdme
This document provides instructions for disassembling and assembling the travel motor of a 330C excavator. It begins by listing the required tools. The disassembly procedure has 28 steps that remove components like the head, springs, plates, and seals. The assembly procedure reverses these steps and provides notes on cleaning, marking parts, and applying thread lock compounds. It cautions that cleanliness is important and springs can cause injury if not assembled properly.
Caterpillar cat 330 c excavator (prefix mca) service repair manual (mca00001 ...jdfjskekmdme
1) The document provides instructions for disassembling and assembling the travel motor of a 330C excavator.
2) It describes 28 steps to disassemble the travel motor by removing components like the head, springs, plates, and seals.
3) It then describes 23 steps for assembling the travel motor, including installing seals, plates, springs, and tightening bolts to the specified torques.
Caterpillar cat 330 c excavator (prefix kdd) service repair manual (kdd00001 ...jdfjskekmdme
1) The document provides step-by-step instructions for disassembling and assembling the travel motor of a 330C L excavator.
2) It lists 28 steps for disassembly, including removing the head, brake piston, plates and discs, seals, and other components.
3) It then lists 28 steps for assembly, placing the components back in reverse order and noting proper installation of seals, springs, and other parts.
Caterpillar cat 330 c excavator (prefix jnk) service repair manual (jnk00001 ...jdfjskekmdme
The document provides installation instructions for a gear pump used in the fan drive of an excavator. It outlines 20 steps to assemble the piston motor that drives the hydraulic fan. These include pressing bearings onto shafts, installing springs, O-rings, seals, and housing components in the proper order and orientation. Precautions are given to ensure cleanliness and prevent injury from parts under pressure.
Caterpillar cat 330 c excavator (prefix jcd) service repair manual (jcd00001 ...jdfjskekmdme
This document provides instructions for disassembling and assembling the travel motor on 330C and 330C L excavator models. The summary is:
1. The disassembly process involves removing 28 components from the travel motor in 28 steps, including removing the head, brake piston, rotating assembly, seals, and other internal parts.
2. Cleanliness is important during disassembly and assembly to prevent contamination. All parts should be cleaned and lubricated before assembly.
3. The assembly process reverses the disassembly steps, involving installing 28 components in 28 steps to reassemble the travel motor. Special tools and torque specifications are provided.
Caterpillar cat 330 c excavator (prefix jab) service repair manual (jab00001 ...jdfjskekmdme
1) The document provides step-by-step instructions for disassembling and assembling the travel motor of a 330C and 330C L excavator.
2) It lists 28 steps for disassembly, including removing the head, brake piston, plates and discs, seals, and other components.
3) It then lists 28 steps for assembly, placing components back in reverse order and noting proper installation of seals, springs, and other parts.
Caterpillar cat 330 c excavator (prefix haa) service repair manual (haa00001 ...jdfjskekmdme
- The document provides instructions for disassembling and assembling the travel motor of a 330C excavator.
- It describes 28 steps to disassemble the travel motor by removing components like the head, port plate, springs, brake piston, plates, and seals.
- It then describes 28 steps for reassembling the travel motor, replacing seals and installing components in the reverse order of disassembly.
- Tools required include an adapter, nuts, washers, threaded rod, eyebolt, retaining ring pliers, bearing puller, and thread lock compound.
Caterpillar cat 330 c excavator (prefix gkx) service repair manual (gkx00001 ...jdfjskekmdme
1) The document provides step-by-step instructions for disassembling and assembling the travel motor of a 330C excavator.
2) It details 28 steps for disassembly, including removing the head, brake piston, plates and discs, seals, and other components.
3) Similarly, it outlines 28 steps for assembly, instructing technicians to replace all seals and gaskets and apply lubricant before reinstalling components in reverse order of disassembly. Cleanliness is emphasized throughout the process.
Caterpillar cat 330 c excavator (prefix gag) service repair manual (gag00001 ...jdfjskekmdme
1) The document provides disassembly and assembly instructions for a 330C excavator travel motor. It describes 28 steps to disassemble the travel motor by removing components like the head, springs, plates, and seals.
2) The assembly section lists 29 steps to reassemble the travel motor by replacing components in the reverse order of disassembly. Special tools are required for tasks like removing races and installing seals and rings.
3) Cleanliness is important during disassembly and assembly. Marks should be made to ensure parts are replaced in the same positions. Seal surfaces require compound and components need light oil applied before assembly.
Caterpillar cat 330 c excavator (prefix btm) service repair manual (btm00001 ...jdfjskekmdme
This document provides instructions for disassembling and assembling the travel motor on a 330C excavator. It details 28 steps for disassembly, removing components like the head, port plate, springs, brake piston, plates, and bearings. It then details 21 steps for assembly, replacing seals and installing components in the reverse order of disassembly, taking care to mark parts and return them to their original positions. Tools required are also listed.
Caterpillar cat 330 b l excavator (prefix 8tr) service repair manual (8tr0000...jdfjskekmdme
This document provides instructions for removing and installing various engine components on a Caterpillar 330B excavator including:
1. The cylinder head removal procedure involves removing the fuel injection lines, exhaust manifold, rocker shaft and pushrods.
2. Installing the cylinder head requires cleaning surfaces, installing gaskets and bolts in a specific tightening sequence.
3. Removing the spacer plate requires taking out seals and removing the plate from the cylinder head. Installing requires new seals and gaskets and ensuring surfaces are clean.
Caterpillar cat 330 b l excavator (prefix 8sr) service repair manual (8sr0000...jdfjskekmdme
The document provides instructions for removing, disassembling, assembling, and installing a rocker shaft and pushrods on an excavator engine. The removal process involves taking off the valve mechanism cover and then removing six bolts and the rocker shaft assembly. Individual pushrods are also removed after being marked for identification. Disassembly of the rocker shaft requires removing retaining rings, springs, washers and rocker arms. Assembly is the reverse of disassembly and installation involves reinstalling the rocker shaft assembly and pushrods and replacing the valve mechanism cover.
Caterpillar cat 330 b l excavator (prefix 5ls) service repair manual (5ls0000...jdfjskekmdme
The document provides instructions for removing and installing connecting rod bearings, crankshaft main bearings, and the crankshaft on a Caterpillar 330B excavator engine. The procedures include using tools to check bearing clearances, installing bearings dry and oiled, tightening bolts in sequences, and verifying end play. The crankshaft removal requires aligning timing marks, removing caps and nuts, pushing pistons down, lifting the crankshaft out using brackets, and removing gears and seals.
Caterpillar cat 330 b l excavator (prefix 4rs) service repair manual (4rs0000...jdfjskekmdme
The documents provide instructions for servicing the valve train components of a Caterpillar 3306 engine. The documents describe procedures for removing and installing the cylinder head, rocker shaft and pushrods. Specifically, they outline removing the cylinder head by first removing associated components like the fuel lines, exhaust manifold, and rocker shaft. They then describe loosening bolts and using lifting devices to remove the heavy cylinder head. Procedures are also provided for disassembling, cleaning, inspecting, and reassembling the rocker shaft.
Caterpillar cat 330 b excavator (prefix 9hn) service repair manual (9hn00001 ...jdfjskekmdme
This document provides instructions for removing and installing final drives on an excavator. Key steps include:
1. Releasing hydraulic pressure and removing the track assemblies.
2. Removing bolts and disconnecting hydraulic lines to separate the final drive from the undercarriage frame.
3. Cleaning components and installing new seals before reassembling in reverse order, taking care to properly tighten bolts and reconnect hydraulic components.
Caterpillar cat 330 b excavator (prefix 8tr) service repair manual (8tr00001 ...jdfjskekmdme
This document provides instructions for removing and installing various engine components on a Caterpillar 330B excavator, including:
- Removing the cylinder head by detaching various lines and manifolds, then lifting it off with a device.
- Installing a new spacer plate gasket and O-rings before positioning the spacer plate on the cylinder head and block.
- Removing and installing water directors by carefully aligning them in the cylinder head.
- Instructions specify cleaning parts thoroughly and applying clean oil to bolts before tightening to specified torques.
Caterpillar cat 330 b excavator (prefix 8sr) service repair manual (8sr00001 ...jdfjskekmdme
The document provides instructions for removing, disassembling, assembling, and installing a rocker shaft and pushrods on an excavator engine. The removal process involves taking off the valve mechanism cover and then removing six bolts and the rocker shaft assembly. Individual pushrods are also removed after being marked for identification. Disassembly of the rocker shaft requires removing retaining rings, springs, washers and rocker arms. Assembly is the reverse of disassembly and installation involves reinstalling the rocker shaft assembly and pushrods and replacing the valve mechanism cover.
Caterpillar cat 330 b excavator (prefix 5ls) service repair manual (5ls00001 ...jdfjskekmdme
The document provides instructions for removing and installing connecting rod bearings, crankshaft main bearings, and the crankshaft on a Caterpillar 330B excavator engine. The procedures include using tools to check bearing clearances, installing bearings dry and oiled, torquing fasteners, and aligning identification marks. The crankshaft removal requires lifting it straight up after removing connecting rods, main bearing caps, and thrust plates.
➒➌➍➑➊➑➏➍➋➒ Satta Matka Satta result marka result
Satta Matka Satta result marka result Dpboss sattamatka341 satta143 Satta Matka Sattamatka New Mumbai Ratan Satta Matka Fast Matka Milan Market Kalyan Matka Results Satta Game Matka Game Satta Matka Kalyan Satta Matka Mumbai Main Online Matka Results Satta Matka Tips Milan Chart Satta Matka Boss
New Star Day Satta King Live Satta Matka Results Satta Matka Company Indian Matka Satta Matka Kalyan Night Matka
➒➌➍➑➊➑➏➍➋➒ Satta Matka Satta result marka result
➒➌➎➏➑➐➋➑➐➐KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
Caterpillar cat 330 c fm excavator (prefix b1k) service repair manual (b1k000...jdfjskekmdme
This document provides instructions for installing a camshaft on a Caterpillar 330C FM excavator engine. It begins by noting the required tools and removing previous components like the rocker arm shaft and front cover. The camshaft is then removed by loosening bolts while aligning timing marks and lifting it out. Reinstallation requires aligning timing marks, lubricating the camshaft, and tightening bolts to specified torque to complete the job. Proper cleaning and lubrication are emphasized to prevent premature wear.
Caterpillar cat 330 c excavator (prefix rbh) service repair manual (rbh00001 ...jdfjskekmdme
- The document provides instructions for disassembling and assembling the travel motor of a 330C excavator.
- It describes 27 steps to disassemble the travel motor by removing components like the head, springs, plates, and seals.
- It then describes 28 steps for reassembling the travel motor, replacing all seals and installing components in the reverse order of disassembly.
- Special tools are required for tasks like removing bearings and installing retaining rings.
Caterpillar cat 330 c excavator (prefix mkm) service repair manual (mkm00001 ...jdfjskekmdme
This document provides instructions for disassembling and assembling the travel motor of a 330C excavator. It begins by listing the required tools. The disassembly procedure has 28 steps that remove components like the head, springs, plates, and seals. The assembly procedure reverses these steps and provides notes on cleaning, marking parts, and applying thread lock compounds. It cautions that cleanliness is important and springs can cause injury if not assembled properly.
Caterpillar cat 330 c excavator (prefix mca) service repair manual (mca00001 ...jdfjskekmdme
1) The document provides instructions for disassembling and assembling the travel motor of a 330C excavator.
2) It describes 28 steps to disassemble the travel motor by removing components like the head, springs, plates, and seals.
3) It then describes 23 steps for assembling the travel motor, including installing seals, plates, springs, and tightening bolts to the specified torques.
Caterpillar cat 330 c excavator (prefix kdd) service repair manual (kdd00001 ...jdfjskekmdme
1) The document provides step-by-step instructions for disassembling and assembling the travel motor of a 330C L excavator.
2) It lists 28 steps for disassembly, including removing the head, brake piston, plates and discs, seals, and other components.
3) It then lists 28 steps for assembly, placing the components back in reverse order and noting proper installation of seals, springs, and other parts.
Caterpillar cat 330 c excavator (prefix jnk) service repair manual (jnk00001 ...jdfjskekmdme
The document provides installation instructions for a gear pump used in the fan drive of an excavator. It outlines 20 steps to assemble the piston motor that drives the hydraulic fan. These include pressing bearings onto shafts, installing springs, O-rings, seals, and housing components in the proper order and orientation. Precautions are given to ensure cleanliness and prevent injury from parts under pressure.
Caterpillar cat 330 c excavator (prefix jcd) service repair manual (jcd00001 ...jdfjskekmdme
This document provides instructions for disassembling and assembling the travel motor on 330C and 330C L excavator models. The summary is:
1. The disassembly process involves removing 28 components from the travel motor in 28 steps, including removing the head, brake piston, rotating assembly, seals, and other internal parts.
2. Cleanliness is important during disassembly and assembly to prevent contamination. All parts should be cleaned and lubricated before assembly.
3. The assembly process reverses the disassembly steps, involving installing 28 components in 28 steps to reassemble the travel motor. Special tools and torque specifications are provided.
Caterpillar cat 330 c excavator (prefix jab) service repair manual (jab00001 ...jdfjskekmdme
1) The document provides step-by-step instructions for disassembling and assembling the travel motor of a 330C and 330C L excavator.
2) It lists 28 steps for disassembly, including removing the head, brake piston, plates and discs, seals, and other components.
3) It then lists 28 steps for assembly, placing components back in reverse order and noting proper installation of seals, springs, and other parts.
Caterpillar cat 330 c excavator (prefix haa) service repair manual (haa00001 ...jdfjskekmdme
- The document provides instructions for disassembling and assembling the travel motor of a 330C excavator.
- It describes 28 steps to disassemble the travel motor by removing components like the head, port plate, springs, brake piston, plates, and seals.
- It then describes 28 steps for reassembling the travel motor, replacing seals and installing components in the reverse order of disassembly.
- Tools required include an adapter, nuts, washers, threaded rod, eyebolt, retaining ring pliers, bearing puller, and thread lock compound.
Caterpillar cat 330 c excavator (prefix gkx) service repair manual (gkx00001 ...jdfjskekmdme
1) The document provides step-by-step instructions for disassembling and assembling the travel motor of a 330C excavator.
2) It details 28 steps for disassembly, including removing the head, brake piston, plates and discs, seals, and other components.
3) Similarly, it outlines 28 steps for assembly, instructing technicians to replace all seals and gaskets and apply lubricant before reinstalling components in reverse order of disassembly. Cleanliness is emphasized throughout the process.
Caterpillar cat 330 c excavator (prefix gag) service repair manual (gag00001 ...jdfjskekmdme
1) The document provides disassembly and assembly instructions for a 330C excavator travel motor. It describes 28 steps to disassemble the travel motor by removing components like the head, springs, plates, and seals.
2) The assembly section lists 29 steps to reassemble the travel motor by replacing components in the reverse order of disassembly. Special tools are required for tasks like removing races and installing seals and rings.
3) Cleanliness is important during disassembly and assembly. Marks should be made to ensure parts are replaced in the same positions. Seal surfaces require compound and components need light oil applied before assembly.
Caterpillar cat 330 c excavator (prefix btm) service repair manual (btm00001 ...jdfjskekmdme
This document provides instructions for disassembling and assembling the travel motor on a 330C excavator. It details 28 steps for disassembly, removing components like the head, port plate, springs, brake piston, plates, and bearings. It then details 21 steps for assembly, replacing seals and installing components in the reverse order of disassembly, taking care to mark parts and return them to their original positions. Tools required are also listed.
Caterpillar cat 330 b l excavator (prefix 8tr) service repair manual (8tr0000...jdfjskekmdme
This document provides instructions for removing and installing various engine components on a Caterpillar 330B excavator including:
1. The cylinder head removal procedure involves removing the fuel injection lines, exhaust manifold, rocker shaft and pushrods.
2. Installing the cylinder head requires cleaning surfaces, installing gaskets and bolts in a specific tightening sequence.
3. Removing the spacer plate requires taking out seals and removing the plate from the cylinder head. Installing requires new seals and gaskets and ensuring surfaces are clean.
Caterpillar cat 330 b l excavator (prefix 8sr) service repair manual (8sr0000...jdfjskekmdme
The document provides instructions for removing, disassembling, assembling, and installing a rocker shaft and pushrods on an excavator engine. The removal process involves taking off the valve mechanism cover and then removing six bolts and the rocker shaft assembly. Individual pushrods are also removed after being marked for identification. Disassembly of the rocker shaft requires removing retaining rings, springs, washers and rocker arms. Assembly is the reverse of disassembly and installation involves reinstalling the rocker shaft assembly and pushrods and replacing the valve mechanism cover.
Caterpillar cat 330 b l excavator (prefix 5ls) service repair manual (5ls0000...jdfjskekmdme
The document provides instructions for removing and installing connecting rod bearings, crankshaft main bearings, and the crankshaft on a Caterpillar 330B excavator engine. The procedures include using tools to check bearing clearances, installing bearings dry and oiled, tightening bolts in sequences, and verifying end play. The crankshaft removal requires aligning timing marks, removing caps and nuts, pushing pistons down, lifting the crankshaft out using brackets, and removing gears and seals.
Caterpillar cat 330 b l excavator (prefix 4rs) service repair manual (4rs0000...jdfjskekmdme
The documents provide instructions for servicing the valve train components of a Caterpillar 3306 engine. The documents describe procedures for removing and installing the cylinder head, rocker shaft and pushrods. Specifically, they outline removing the cylinder head by first removing associated components like the fuel lines, exhaust manifold, and rocker shaft. They then describe loosening bolts and using lifting devices to remove the heavy cylinder head. Procedures are also provided for disassembling, cleaning, inspecting, and reassembling the rocker shaft.
Caterpillar cat 330 b excavator (prefix 9hn) service repair manual (9hn00001 ...jdfjskekmdme
This document provides instructions for removing and installing final drives on an excavator. Key steps include:
1. Releasing hydraulic pressure and removing the track assemblies.
2. Removing bolts and disconnecting hydraulic lines to separate the final drive from the undercarriage frame.
3. Cleaning components and installing new seals before reassembling in reverse order, taking care to properly tighten bolts and reconnect hydraulic components.
Caterpillar cat 330 b excavator (prefix 8tr) service repair manual (8tr00001 ...jdfjskekmdme
This document provides instructions for removing and installing various engine components on a Caterpillar 330B excavator, including:
- Removing the cylinder head by detaching various lines and manifolds, then lifting it off with a device.
- Installing a new spacer plate gasket and O-rings before positioning the spacer plate on the cylinder head and block.
- Removing and installing water directors by carefully aligning them in the cylinder head.
- Instructions specify cleaning parts thoroughly and applying clean oil to bolts before tightening to specified torques.
Caterpillar cat 330 b excavator (prefix 8sr) service repair manual (8sr00001 ...jdfjskekmdme
The document provides instructions for removing, disassembling, assembling, and installing a rocker shaft and pushrods on an excavator engine. The removal process involves taking off the valve mechanism cover and then removing six bolts and the rocker shaft assembly. Individual pushrods are also removed after being marked for identification. Disassembly of the rocker shaft requires removing retaining rings, springs, washers and rocker arms. Assembly is the reverse of disassembly and installation involves reinstalling the rocker shaft assembly and pushrods and replacing the valve mechanism cover.
Caterpillar cat 330 b excavator (prefix 5ls) service repair manual (5ls00001 ...jdfjskekmdme
The document provides instructions for removing and installing connecting rod bearings, crankshaft main bearings, and the crankshaft on a Caterpillar 330B excavator engine. The procedures include using tools to check bearing clearances, installing bearings dry and oiled, torquing fasteners, and aligning identification marks. The crankshaft removal requires lifting it straight up after removing connecting rods, main bearing caps, and thrust plates.
➒➌➍➑➊➑➏➍➋➒ Satta Matka Satta result marka result
Satta Matka Satta result marka result Dpboss sattamatka341 satta143 Satta Matka Sattamatka New Mumbai Ratan Satta Matka Fast Matka Milan Market Kalyan Matka Results Satta Game Matka Game Satta Matka Kalyan Satta Matka Mumbai Main Online Matka Results Satta Matka Tips Milan Chart Satta Matka Boss
New Star Day Satta King Live Satta Matka Results Satta Matka Company Indian Matka Satta Matka Kalyan Night Matka
➒➌➍➑➊➑➏➍➋➒ Satta Matka Satta result marka result
➒➌➎➏➑➐➋➑➐➐KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS
SATTA MATKA | DPBOSS | KALYAN MAIN BAZAR | FAST MATKA RESULT KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
MATKA NUMBER FIX MATKANUMBER FIX SATTAMATKA FIXMATKANUMBER SATTA MATKA ALL SATTA MATKA FREE GAME KALYAN MATKA TIPS KAPIL MATKA GAME SATTA MATKA KALYAN GAME DAILY FREE 4 ANK ALL MARKET PUBLIC SEVA WEBSITE FIX FIX MATKA NUMBER INDIA.S NO1 WEBSITE TTA FIX FIX FIX MATKA GURU INDIA MATKA KALYAN CHART MATKA GUESSING KALYAN FIX OPEN FINAL 3 ANK SATTAMATKA143 GUESSING SATTA BATTA MATKA FIX NUMBER TODAY WAPKA FIX AAPKA FIX FIX FIX FIX SATTA GURU NUMBER SATTA MATKA MATKA143 SATTA SATTA SATTA MATKA SATTAMATKA1438 FIX MATKA MATKA BOSS SATTA LIVE 3MATKA 143 FIX FIX FIX KALYAN JODI MATKA KALYAN FIX FIX WAP MATKA BOSS440 SATTA MATKA FIX FIX MATKA NUMBER SATTA MATKA FIXMATKANUMBER FIX MATKA MATKA RESULT FIX MATKA NUMBER FREE DAILY FIX MATKA NUMBER FIX FIX MATKA JODI SATTA MATKA FIX ANK MATKA ANK FIX KALYAN MUMBAI MATKA NUMBER FIXMATKANUMBER SATTA NUMBER FAST MATKA RESULT SATTA BATTA INDIAN SATTA SATTA RESULT MADHUR SATTA PRABHAT SATTA FIX FIX FIX SATTA NUMBER SATTAKING143 GUESSING SATTA CHART KALYAN PENAL CHART MATKA420 SATTA GUESSING NUMBER KALYAN NIGHT CHART SATTA FIX FIX FIX SATTA NUMBER FIX FIX FIX OPEN FIX FIX WAPKA MATKA DPBOSS FIX FIX 3ANK MATKA KALYAN CHART MATKA GUESSING TARA MATKA FIX FIXMATKANUMBER FINAL ANK MATKABOSS DUBAI SATTA MATKA GOLDEN MATKA FIX FIX MATKA NUMBER FIX MATKANUMBER FIX FIX FIX MATKA NUMBER FIX MATKANUMBER FIX SATTAMATKA FIXMATKANUMBER SATTA MATKA ALL SATTA MATKA FREE GAME KALYAN MATKA TIPS KAPIL MATKA GAME SATTA MATKA KALYAN GAME DAILY FREE 4 ANK ALL MARKET PUBLIC SEVA SATTA FIX FIX FIX MATKA GURU INDIA MATKA KALYAN CHART MATKA GUESSING KALYAN FIX OPEN FINAL 3 ANK SATTAMATKA143 GUESSING SATTA BATTA MATKA FIX NUMBER TODAY WAPKA FIX AAPKA FIX FIX FIX FIX SATTA GURU NUMBER SATTA MATKA MATKA143 SATTA SATTA SATTA MATKA SATTAMATKA1438 FIX MATKA MATKA BOSS SATTA LIVE 3MATKA 143 FIX FIX FIX KALYAN JODI MATKA KALYAN FIX FIX WAP MATKA BOSS440 SATTA MATKA FIX FIX MATKA NUMBER SATTA MATKA FIXMATKANUMBER FIX MATKA MATKA RESULT FIX MATKA NUMBER FREE DAILY FIX MATKA NUMBER FIX FIX MATKA JODI SATTA MATKA FIX ANK MATKA ANK FIX KALYAN MUMBAI MATKA NUMBER FIXMATKANUMBER SATTA NUMBER FAST MATKA RESULT SATTA BATTA INDIAN SATTA SATTA RESULT MADHUR SATTA PRABHAT SATTA FIX FIX FIX SATTA NUMBER SATTAKING143 GUESSING SATTA CHART KALYAN PENAL CHART MATKA420 SATTA GUESSING NUMBER KALYAN NIGHT CHART SATTA FIX FIX FIX SATTA NUMBER FIX FIX FIX OPEN FIX FIX WAPKA MATKA DPBOSS FIX FIX 3ANK MATKA KALYAN CHART MATKA GUESSING TARA MATKA FIX FIXMATKANUMBER FINAL ANK MATKABOSS DUBAI SATTA MATKA GOLDEN MATKA WAPKA.FIX FIX FIX
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka GuessingKALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka Satta Matta Matka KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
Mr. Brainwash ❤️ Beautiful Girl _ FRANK FLUEGEL GALERIE.pdfFrank Fluegel
Mr. Brainwash Beautiful Girl / Mixed Media / signed / Unique
Year: 2023
Format: 96,5 x 127 cm / 37.8 x 50 inch
Material: Fine Art Paper with hand-torn edges.
Method: Mixed Media, Stencil, Spray Paint.
Edition: Unique
Other: handsigned by Mr. Brainwash front and verso.
Beautiful Girl by Mr. Brainwash is a mixed media artwork on paper done in 2023. It is unique and of course signed by Mr. Brainwash. The picture is a tribute to his own most successful work of art, the Balloon Girl. In this new creation, however, the theme of the little girl is slightly modified.
In Mr. Brainwash’s mixed media artwork titled “Beautiful Girl,” we are presented with a captivating depiction of a little girl adorned in a summer dress, with two playful pigtails framing her face. The artwork exudes a sense of innocence and whimsy, as the girl is shown in a dreamy state, lifting one end of her skirt and looking down as if she were about to dance. Through the use of mixed media, Mr. Brainwash skillfully combines different artistic elements to create a visually striking composition. The vibrant colors and bold brushstrokes bring the artwork to life, evoking a sense of joy and happiness. The attention to detail in the girl’s expression and body language adds depth and character to the piece, allowing viewers to connect with the young protagonist on a personal and emotional level. “Beautiful Girl” is a testament to Mr. Brainwash’s unique artistic style, blending elements of street art, pop art, and contemporary art to create a visually captivating and emotionally resonant artwork.
The use of mixed media in “Beautiful Girl” adds an additional layer of complexity to the artwork. By combining different artistic techniques and materials, such as stencils, spray paint, and collage, Mr. Brainwash creates a dynamic and textured composition that grabs the viewer’s attention. The juxtaposition of different textures and patterns adds depth and visual interest to the piece, while also emphasizing the artist’s eclectic and experimental approach to art-making. The inclusion of collage elements, such as newspaper clippings and torn posters, further enhances the artwork’s urban and contemporary feel. Overall, “Beautiful Girl” is a visually captivating and thought-provoking artwork that showcases Mr. Brainwash’s talent for blending different artistic elements to create a truly unique and engaging piece.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart Final Matka Satta Matta Matka 143 Kalyan Chart Satta fix Jodi Kalyan Final ank Matka Boss Satta 143 Matka 420 Golden Matka Final Satta Kalyan Penal Chart Dpboss 143 Guessing Kalyan Night Chart
Caterpillar cat th360 b and th560b telehandler service repair manual sn tbh00100 and after
1. Section Title Manual No.
Service Manual Contents 31200265
Torque Specifications 31200268
Engine
Disassembly & Assembly Engine Supplement 31200299
Power Train
Systems Operation, Testing & Adjusting Power Train 31200270
Disassembly & Assembly Power Train 31200300
Vehicle Systems
Schematic Hydraulic System 31200304
Systems Operation, Testing & Adjusting Hydraulic System 31200302
Systems Operation, Testing & Adjusting Steering System 31200273
Systems Operation, Testing & Adjusting Brake System 31200274
Machine Components Specs Machine Systems 31200306
Disassembly & Assembly Machine Systems 31200308
Electrical Systems
Schematic - TH360B Electrical System 31200310
Schematic - TH560B Electrical System 31200311
Machine Troubleshooting Hydrostatic Transmission
Electronic Control System
31200279
Systems Operation, Testing & Adjusting LSI System 31200280
Systems Operation, Testing & Adjusting Monitoring System 31200281
TH360B & TH560B
Telehandler Service Manual
S/N TBH00100 & After
S/N TBP00100 & After
31200264
31200265 A
2. 31200299 3
Disassembly and Assembly Section
Disassembly and
Assembly Section
Battery - Remove and Install
Removal Procedure
Start By:
a. If equipped, turn the battery disconnect switch to the OFF
position. Refer to Operation and Maintenance Manual,
"Battery Disconnect Switch (if equipped) ".
Batteries give off flammable fumes that can
explode resulting in personal injury.
Prevent sparks near the batteries. They could
cause vapors to explode. Do not allow the jump
start cable ends to contact each other or the
machine.
Do not smoke when checking battery electrolyte
levels.
Electrolyte is an acid and can cause personal
injury if it contacts skin or eyes.
Always wear eye protection when starting a
machine with jump start cables.
Improper jump start procedures can cause an
explosion resulting in personal injury.
Always connect the positive (+) to positive (+) and
the negative (-) to negative (-).
Jump start only with an energy source with the
same voltage as the stalled machine.
Turn off all lights and accessories on the stalled
machine. Otherwise, they will operate when the
energy source is connected.
Illustration 1 g00909832
1. The following procedure shows the removal of the
front battery which is an attachment. Use the same
procedure when you are removing the rear battery.
Illustration 2 g00909220
2. Pull back the terminal cover (1) in order to
disconnect positive cable (2). Pull back the
terminal cover (3) in order to disconnect negative
cable (4).
Illustration 3 g00909235
3. Remove nuts (5), the washers and hold down
bracket (6).
Illustration 4 g00909831
4. With the aid of a second person or with the aid of
a suitable lifting device, remove battery (7). The
weight of the battery is approximately 25 kg (55 lb).
Remove studs (8).
3. 4 31200299
Disassembly and Assembly Section
Installation Procedure
Illustration 5 g00909832
1. The following procedure shows the installation of
the front battery which is an attachment. Use the
same procedure when you are installing the rear
battery.
Illustration 6 g00909831
2. Install studs (8). With the aid of a second person
or with the aid of a suitable lifting device, install
battery (7). The weight of the battery is
approximately 25 kg (55 lb).
Illustration 7 g00909235
3. Install hold down bracket (6), nuts (5), and the
washers.
Illustration 8 g00909220
4. Connect positive cable (2) and slide terminal cover
(1) into position. Connect Negative cable (4) and
slide terminal cover (3) into position.
End By:
a. If equipped, turn the battery disconnect switch to the ON
position. Refer to Operation and Maintenance Manual,
"Battery Disconnect Switch (if equipped)".
Alternator - Remove and Install
Removal Procedure
Start By:
a. Turn the battery disconnect switch to the OFF position.
Refer to Operation and Maintenance Manual, "Battery
Disconnect Switch (if equipped)". If the machine is not
equipped with a battery disconnect switch, disconnect
the battery cables from the battery and insulate the
battery clamps.
1. Put identification marks on all wires for installation
purposes.
Illustration 9 g00908444
2. Remove belt (1) from alternator (2). Refer to
Operation and maintenance Manual, "Belts -
Inspect/Adjust/Replace".
3. Disconnect wires (3) and positive cable (4).
4. Remove bolt (5), the washer, nut (6), bolt (7) and
the washers before removing alternator (2) from
the machine.
4. 31200299 5
Disassembly and Assembly Section
Installation Procedure
1. Clean all parts and inspect all parts. If any parts are
worn or damaged, use new Caterpillar parts for
replacement.
Illustration 10 g00908444
2. Position alternator (2) onto the machine. Install
bolt (7), nut (6) and washers. Install bolt (5) and
the washer.
3. Connect wires (3) and positive cable (4) to
alternator (2).
4. Install belt (1) from alternator (2). Refer to
Operation and maintenance Manual, "Belts -
Inspect/Adjust/Replace".
End By:
a. Turn the battery disconnect switch to the ON position.
Refer to Operation and Maintenance Manual, "Battery
Disconnect Switch (if equipped)". If the machine is not
equipped with a battery disconnect switch and the
battery was disconnected, remove the insulation from
the battery clamps and install the battery cables onto the
battery.
Electric Starting Motor -Remove
and Install
Removal Procedure
Accidental machine starting can cause injury or
death to personnel working on the machine.
To avoid accidental machine starting, turn the battery
disconnect switch to the OFF position and remove
the key. If the machine is not equipped with a battery
disconnect switch, disconnect the battery cables
from the battery and tape the battery clamps.
Place a do not operate tag at the battery disconnect
switch location to inform personnel that the
machine is being worked on.
1. Put identification marks on all wires for installation
purposes.
Illustration 11 g00908447
2. Disconnect positive cable (2) from starter motor (1).
Lift the plastic cap (not shown) in order to access
screw (3) and disconnect wire (4).
Illustration 12 g00908460
3. Remove bolt (5) in order to disconnect ground
cable (6).
4. Remove bolts (7) and remove starter motor (1)
from the engine.
Installation Procedure
1. Clean all parts and inspect all parts. If any parts are
worn or damaged, use new Caterpillar parts for
replacement.
5. 6 31200299
Disassembly and Assembly Section
Illustration 13 g00908460
2. Position starter motor (1) onto the engine and
install bolts (7).
3. Position ground cable (6) and install bolt (5).
Illustration 14 g00908447
4. Install screw (3) in order to connect wire (4). Close
the plastic cap (not shown). Connect positive cable
(2) to starter motor (1).
End By:
a. Turn the battery disconnect switch to the ON position.
Refer to Operation and Maintenance Manual, "Battery
Disconnect Switch (if equipped)". If the machine is not
equipped with a battery disconnect switch and the
battery was disconnected, remove the insulation from
the battery clamps and install the battery cables onto the
battery.
Air Cleaner - Remove
Removal Procedure
Illustration 15 g00909117
1. Disconnect inlet duct (2) from air cleaner assembly
(1).
Illustration 16 g00909118
2. Remove hose clamp (3) and disconnect inlet hose
(4) from air cleaner assembly (1).
Illustration 17 g00909119
3. Disconnect hose (5) from air cleaner assembly (1).
6. 31200299 7
Disassembly and Assembly Section
Illustration 18 g00909120
Illustration 19 g00909121
4. Remove nuts (6), bolts (7) and the washers
before removing air cleaner assembly (1) from the
engine.
Air Cleaner - Install
Installation Procedure
1. Clean all parts and inspect all parts. If any parts are
worn or damaged, use new Caterpillar parts for
replacement.
Illustration 20 g00909122
Illustration 21 g00909123
2. Position air cleaner assembly (1) on the engine and
install bolts (7), nuts (6) and the washers.
Illustration 22 g00909124
3. Connect hose (5) to air cleaner assembly (1).
Illustration 23 g00909125
4. Connect inlet hose (4) to air cleaner assembly (1)
and install hose clamp (3).
7. 8 31200299
Disassembly and Assembly Section
Illustration 24 g00909126
5. Connect inlet duct (2) to air cleaner assembly (1).
Muffler - Remove and Install
Removal Procedure
Hot oil and components can cause personal injury.
Do not allow hot oil or components to contact
skin.
Illustration 25 g00914593
1. Remove bolts (1) and the washers in order to
remove cover (2) and exhaust shield (3).
Illustration 26 g00914594
The photograph is from the top side of the muffler
2. Remove clamp (4) which connects exhaust pipe (5)
to muffler (6).
Illustration 27 g00914595
Illustration 28 g00914606
3. Remove bolts (7) and the washers before sliding
muffler (6) away from exhaust pipe (5). Remove the
muffler from the machine.
Installation Procedure
Illustration 29 g00914606
8. 31200299 9
Disassembly and Assembly Section
Illustration 30 g00914595
1. Position muffler (6) and then slide the muffler onto
exhaust pipe (5) before installing bolts (7) and the
washers.
Illustration 31 g00914594
The photograph is from the top side of the muffler.
2. Install clamp (4) which connects exhaust pipe (5) to
muffler (6).
Illustration 32 g00914593
3. Position exhaust shield (3) with cover (2) and
install bolts (1) with the washers.
Expansion Tank - Remove and
Install
Removal Procedure
At operating temperature, the engine coolant is hot
and under pressure.
Steam can cause personal injury.
Check the coolant level only after the engine has
been stopped and the fill cap is cool enough to
touch with your bare hand.
Remove the fill cap slowly to relieve pressure.
Cooling system conditioner contains alkali. Avoid
contact with the skin and eyes to prevent personal
injury.
NOTICE
Care must be taken to ensure that fluids are contained
during performance of inspection, maintenance, testing,
adjusting and repair of the product. Be prepared to collect
the fluid with suitable containers before opening any
compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and
mandates.
1. Drain the coolant from the radiator into a suitable
container so that the level of the coolant in the
radiator is below the level of the expansion tank.
The capacity of the cooling system is
approximately 27.5 L (7.3 US gal). Refer to the
appropriate Operation and Maintenance Manual.
Illustration 33 g00914256
2. Loosen the hose clamp and disconnect hose (6)
from expansion tank (3).
3. Disconnect hose (4) from filler cap (5).
9. 10 31200299
Disassembly and Assembly Section
Illustration 34 g00914264
4. Loosen the hose clamps and disconnect hose (1)
and hose (2) from expansion tank (3).
5. Remove bolts (7) and the washers in order to
remove expansion tank (3).
Installation Procedure
Illustration 35 g00914264
1. Position expansion tank (3) and install bolts (7)
and the washers.
2. Connect hose (6) to expansion tank (3) and
tighten the hose clamp.
Illustration 36 g00914256
3. Disconnect hose (4) from filler cap (5).
4. Connect hose (1) and hose (2) to expansion tank
(3) and tighten the hose clamps.
5. Fill the cooling system. The capacity of the cooling
system is approximately 27.5 L (7.3 US gal).
Refer to the appropriate Operation and
Maintenance Manual.
Radiator - Remove
Removal Procedure
Start By:
a. Remove the access plate.
At operating temperature, the engine coolant is hot
and under pressure.
Steam can cause personal injury.
Check the coolant level only after the engine has
been stopped and the fill cap is cool enough to
touch with your bare hand.
Remove the fill cap slowly to relieve pressure.
Cooling system conditioner contains alkali. Avoid
contact with the skin and eyes to prevent personal
injury.
NOTICE
Care must be taken to ensure that fluids are contained
during performance of inspection, maintenance, testing,
adjusting and repair of the product. Be prepared to collect
the fluid with suitable containers before opening any
compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and
mandates.
1. Put identification marks on all hoses for installation
purposes. Plug all hoses. This helps to prevent
fluid loss, and this helps to keep contaminants
from entering the system.
2. Drain the coolant from the cooling system into a
suitable container for storage or disposal. The
capacity of the cooling system is approximately
27.5 L (7.3 US gal). Refer to the appropriate
Operation and Maintenance Manual.
10. 31200299 11
Disassembly and Assembly Section
Illustration 37 g00912426
3. If equipped, release latch (1) in order to remove
condenser (2) from radiator (3). Tilt the condenser
and remove the condenser from the mounts at the
base of the radiator. Move the condenser aside.
Note: Do not disconnect the hose to the condenser.
The radiator can be removed without discharging the
refrigerant.
Illustration 38 g00912772
4. Loosen the hose clamp and disconnect hose (top)
(4) from radiator (3).
Illustration 39 g00912773
5. Loosen the hose clamp and disconnect hose
(bottom) (5) from the radiator.
Illustration 40 g00912779
6. Loosen the hose clamp and disconnect hose (6)
from radiator (3).
Illustration 41 g00912775
7. Remove bolts (7) and the washer from both sides
of shroud (8).
Illustration 42 g00912780
8. Remove bolts (9), the washers, bolt (10), the
washer and mount (11) in order to remove bracket
(12) from radiator (3) and the chassis.
11. 12 31200299
Disassembly and Assembly Section
Illustration 43 g00912781
9. Remove bolt (13), the washers, mount (14), bolt
(15) and the washer in order to remove bracket
(16) from radiator (3) and the chassis.
Illustration 44 g00912782
10. Remove bolts (17), the washers and the nuts that
secure radiator (3) to the chassis.
11. With the aid of a second person, remove radiator
(3) from the machine.
Illustration 45 g00912783
12. Remove mounts (18) from the chassis.
Radiator - Disassemble
Disassembly Procedure
Start By:
a. Remove the radiator from the machine. Refer to
Disassembly and Assembly, "Radiator - Remove".
Illustration 46 g00913571
1. Remove bolts (1) and the washers in order to
remove bracket (2) from radiator (3).
Illustration 47 g00913572
2. Remove bolts (4) and the washers in order to
remove bracket (5) from radiator (3).
Illustration 48 00913575
12. 31200299 13
Disassembly and Assembly Section
3. Remove bolts (6) and the washers in order to
remove mounting bracket (7) from radiator core
(3).
4. Remove bolts (8) and the washers in order to
remove mounting bracket (9) from radiator core
(3).
Radiator - Assemble
Assembly Procedure
Illustration 49 00913593
1. Position mounting bracket (9) onto radiator (3) and
install bolts (8) with the washers.
2. Position mounting bracket (7) onto radiator (3) and
install bolts (6) with the washers.
Illustration 50 g00913594
3. Position bracket (5) onto the front of radiator (3)
and install bolts (4) with the washers.
Illustration 51 g00913595
4. Position bracket (2) onto the front of radiator (3)
and install bolts (1) with the washers.
End By:
a. Install the radiator onto the machine. Refer to
Disassembly and Assembly, "Radiator - Install".
Radiator - Install
Installation Procedure
1. Clean all parts and inspect all parts. If any parts are
worn or damaged, use new Caterpillar parts for
replacement.
Illustration 52 g00912841
2. Install mounts (18) into the chassis.
Illustration 53 g00912843
13. 14 31200299
Disassembly and Assembly Section
3. With aid of a second person, lift radiator (3) into
position. Install bolts (17), the washers and the nuts
that secure the radiator to the chassis.
Illustration 54 g00912846
4. Install bolt (13), the washer, mount (14), bolt (15)
and the washer in order to secure bracket (16) to
radiator (3) and the chassis.
Illustration 55 g00912848
5. Install bolts (9), the washer, bolt (10), the washer
and mount (11) in order to secure bracket (12) to
radiator (3) and the chassis.
Illustration 56 g00912849
6. Install bolts (7) and the washers into both sides of
shroud (8).
Illustration 57 g00912853
7. Connect hose (6) to radiator (3) and tighten the
hose clamp.
Illustration 58 g00912861
8. Connect hose (bottom) (5) to radiator (3) and
tighten the hose clamp.
Illustration 59 g00912860
9. Connect hose (top) (4) to radiator (3) and tighten
the hose clamp.
14. 31200299 15
Disassembly and Assembly Section
Illustration 60 g00912875
10. If equipped, Install condenser (2) into the mounts
at the base of radiator (3) before you fasten latch
(1).
11. Fill the cooling system. The capacity of the cooling
system is approximately 27.5 L (7.3 US gal).
Refer to the appropriate Operation and
Maintenance Manual.
End By:
a. Install the access plate.
Fan Guard - Remove and Install
Removal Procedure
Illustration 61 g00909977
1. Remove bolts (1) and the washers in order to
remove fan guard (2) from shroud (3).
Installation Procedure
Illustration 62 g00909977
1. Position fan guard (2) on shroud (3) and install
bolts (1) and the washers.
Transmission Oil Cooler -
Remove
Removal Procedure
Start By:
a. Remove the access plate.
Personal injury can result from hydraulic oil
pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic
system after the engine has been stopped. Serious
injury can be caused if this pressure is not released
before any service is done on the hydraulic system.
Make sure all of the attachments have been
lowered, oil is cool before removing any
components or lines. Remove the oil filler cap only
when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
At operating temperature, the engine coolant is hot
and under pressure.
Steam can cause personal injury.
15. 16 31200299
Disassembly and Assembly Section
Check the coolant level only after the engine has
been stopped and the fill cap is cool enough to
touch with your bare hand.
Remove the fill cap slowly to relieve pressure.
Cooling system conditioner contains alkali. Avoid
contact with the skin and eyes to prevent personal
injury.
NOTICE
Care must be taken to ensure that fluids are contained
during performance of inspection, maintenance, testing,
adjusting and repair of the product. Be prepared to collect
the fluid with suitable containers before opening any
compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and
mandates.
1. Put Identification marks on all hoses for installation
purposes. Plug all hoses. This helps to prevent
fluid loss, and this helps to keep contaminants
from entering the system.
2. Drain the coolant from the cooling system into a
suitable container for storage or disposal. The
capacity of the cooling system is approximately
27.5 L (7.3 US gal). Refer to the appropriate
Operation and Maintenance Manual.
Illustration 63 g00910188
3. From the underside of the machine, loosen the
hose clamps and disconnect hoses (1) from oil
cooler (2).
4. Loosen the hose clamps and disconnect hoses
(3) from oil cooler (2).
5. Remove bolts (4) and the washer in order to
remove oil cooler (2) from the machine.
Transmission Oil Cooler -Install
Installation Procedure
Oil Cooler (High Ambient Temperature
Cooling Arrangement)
Note: The following procedure will give additional
information that is required to install an oil cooler for the
high ambient temperature cooling arrangement.
Remove Components
Illustration 64 g00987113
1. Loosen the hose clamp and remove hose (1) from
radiator (2).
2. Remove all hose clips and any cable straps which
secure hose (3).
3. Loosen the hose clamp and disconnect hose (3)
from water pump (4).
4. Loosen the hose clamp and disconnect hose (3)
from expansion tank (5) before removing the hose
from the machine.
Install Components
Illustration 65 g00987125
1. The following steps show the location of all hoses to
be installed with the high ambient temperature
cooling arrangement. Refer to Parts Manual, "Lines
16. 31200299 17
Disassembly and Assembly Section
Gp - Coolant" for the part numbers for all
components.
2. Connect a new hose (3) to expansion tank (5) and
tighten the hose clamp.
3. Connect hose (3) to water pump (4) and tighten
the hose clamp.
4. Install all hose clips and any cable straps which
secure hose (3).
Note: A new hose clamp (6) is installed as part of the
installation procedure for the oil cooler. Refer to
Disassembly and Assembly, "Transmission Oil Cooler -
Install".
5. Connect a new hose (1) to radiator (2).
Note: A new hose clamp (6) is installed as part of the
installation procedure for the oil cooler. Refer to
Disassembly and Assembly, "Transmission Oil Cooler -
Install".
Transmission Oil Cooler
1. Clean all parts and inspect all parts. If any parts are
worn or damaged, use new Caterpillar parts for
replacement.
Illustration 66 g00910194
2. At the underside of the machine, position oil cooler
(2) and install bolts (4) and the washers.
3. Connect hoses (3) and tighten the hose clamps.
4. Connect hoses (1) and tighten the hose clamps.
5. Fill the cooling system. The capacity of the cooling
system is approximately 27.5 L (7.3 US gal).
Refer to the appropriate Operation and
Maintenance Manual.
Refrigerant Condenser -
Remove and Install
Removal Procedure
Personal injury can result from contact with
refrigerant.
Contact with refrigerant can cause frost bite. Keep
face and hands away to help prevent injury.
Protective goggles must always be worn when
refrigerant lines are opened, even if the gauges
indicate the system is empty of refrigerant.
Always use precaution when a fitting is removed.
Slowly loosen the fitting. If the system is still under
pressure, release it slowly in a well ventilated area.
Personal injury or death can result from inhaling
refrigerant through a lit cigarette.
Inhaling air conditioner refrigerant gas through a lit
cigarette or other smoking method or inhaling
fumes released from a flame contacting air
conditioner refrigerant gas, can cause bodily harm
or death.
Do not smoke when servicing air conditioners or
wherever refrigerant gas may be present.
Use a certified recovery and recycling cart to properly
remove the refrigerant from the air conditioning
system.
1. Recover the air conditioner refrigerant from the air
conditioner system. The correct charge is 0.8 kg
(1.8 lb).
Illustration 67 g00910214
2. Disconnect two hoses (1) from condenser (2).
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. 18 31200299
Disassembly and Assembly Section
Illustration 68 g00910954
Illustration 69 g00910955
3. Release latch assembly (3). Tilt condenser (2)
toward the front of the machine before removing the
condenser.
Installation Procedure
Illustration 70 g00945940
Illustration 71 g00910954
1. Install condenser (2) into mount (4). Tilt the
condenser toward the rear of the machine and
fasten latch assembly (3).
Illustration 72 g00910214
2. Connect two hoses (1) to condenser (2).
3. Charge the air conditioner system. The correct
charge is 0.8 kg (1.8 lb).
19. 31200299 19
Disassembly and Assembly Section
Refrigerant Compressor -
Remove and Install
Removal Procedure
Start By:
a. Recover the air conditioner refrigerant from the air
conditioner system. The correct charge is 0.8 kg
(1.8 lb).
b. Remove the air cleaner. Refer to Disassembly and
Assembly, "Air Cleaner - Remove".
c. Remove the fan drive belt. Refer to
Operation and Maintenance Manual, "Belts -
Inspect/Adjust/Replace".
Personal injury can result from contact with
refrigerant.
Contact with refrigerant can cause frost bite. Keep
face and hands away to help prevent injury.
Protective goggles must always be worn when
refrigerant lines are opened, even if the gauges
indicate the system is empty of refrigerant.
Always use precaution when a fitting is removed.
Slowly loosen the fitting. If the system is still under
pressure, release it slowly in a well ventilated area.
Personal injury or death can result from inhaling
refrigerant through a lit cigarette.
Inhaling air conditioner refrigerant gas through a lit
cigarette or other smoking method or inhaling
fumes released from a flame contacting air
conditioner refrigerant gas, can cause bodily harm
or death.
Do not smoke when servicing air conditioners or
wherever refrigerant gas may be present.
Use a certified recovery and recycling cart to properly
remove the refrigerant from the air conditioning
system.
1. Put identification marks on all hose, on all tubes
and on all wires for installation purposes. Plug all
hoses and tubes. This helps prevent fluid loss, and
this helps to keep contaminants from entering the
system.
Illustration 73 g00921116
2. Remove bolt (1), the washers, the nut, the lower
half of mount (2) and plate (3). This will enable
access to the rear of refrigerant compressor (4).
Illustration 74 g00921516
3. Disconnect two tubes (5) from refrigerant
compressor (4).
Illustration 75 g00921517
4. Disconnect harness (6) from refrigerant
compressor (4).
5. Remove four bolts (7) and the washers in order
to remove refrigerant compressor (4) from the
machine.
Installation Procedure
1. Clean all parts and inspect all parts. If any parts are
worn or damaged, use new Caterpillar parts for
replacement.
20. 20 31200299
Disassembly and Assembly Section
Illustration 76 g00921517
2. Position refrigerant compressor (4) onto the
machine and install four bolts (7) and the washers.
3. Connect harness (6) for refrigerant compressor
(4).
Illustration 77 g00921516
4. Connect two tubes (5) to refrigerant compressor
(4).
Illustration 78 g00921116
5. Position the lower half of mount (2) and plate (3)
before installing bolts (1), the washers and the nut.
Tighten the nut and the bolt to a torque of 775 ± 20
Nm (572 ± 15 lb ft).
End By:
a. Install the fan drive belt. Refer to Operation
and Maintenance Manual, "Belts -
Inspect/Adjust/Replace".
b. Install the air cleaner. Refer to Disassembly and
Assembly, "Air Cleaner- Install".
c. Charge the air conditioner system. The correct
charge is 0.8 kg (1.8 lb).
Engine Mount (Front) - Remove
Removal Procedure
Start By:
a. Remove the hood and the rear cover panel. Refer to
Disassembly and Assembly, "Engine Enclosure - Remove
and Install".
Personal injury or death can result from improper
lifting or blocking.
When a hoist or jack is used to lift any part or
component, stand clear of the area. Be sure the
hoist or jack has the correct capacity to lift a
component. Install blocks or stands before
performance of any work under a heavy
component.
Approximate weights of the components are
shown. Clean all surfaces where parts are to be
installed.
1. The following procedure is used to remove the
engine mount from the right side of the machine.
Use the same procedure to remove the engine
mount from the left side of the machine.
Illustration 79 g00921569
2. Remove bolt (1), the washers, the nut, the lower
half of mount (2) and washers (3).