This document provides instructions for servicing the fuel system of a D7F track-type tractor. It describes how to disassemble and assemble various components of the sleeve metering fuel system, including the adapter housings and levers, speed limiter, governor, and connection of the governor to the fuel injection pump housing. Detailed steps are provided for removing and installing each part, with notes about specific components and proper installation.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...wenxian17880
The document provides instructions for disassembling and assembling components of a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components.
- Removing and installing the inlet manifold (precombustion chamber), which requires disconnecting air lines and removing mounting bolts.
- Removing and installing the aftercooler (direct injection), which involves draining coolant, removing mounting bolts, elbows, and the aftercooler core. Reassembly requires replacing seals and mounting all components back into the housing.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...xiapokang564341
The document provides instructions for disassembling and assembling components of a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components.
- Removing and installing the inlet manifold (precombustion chamber), which requires disconnecting air lines and removing mounting bolts.
- Removing and installing the aftercooler (direct injection), which involves draining coolant, removing mounting bolts, elbows, and the aftercooler core. Reassembly requires replacing seals and mounting all components back into the housing.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...hvy7sbkw8e
The document provides instructions for disassembling and assembling components of a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components.
- Removing and installing the inlet manifold (precombustion chamber), which requires disconnecting air lines and removing mounting bolts.
- Removing and installing the aftercooler (direct injection), which involves draining coolant, removing mounting bolts, elbows, and the aftercooler core. Reassembly requires replacing seals and mounting all components back into the housing.
The document provides instructions for disassembling and assembling various components of a 951C track loader powered by a 3304 engine, including:
- Removing and installing adapter housings and levers on the fuel system
- Removing and installing the speed limiter
- Separating and connecting the governor from the fuel injection pump housing
- Disassembling and assembling the governor
The instructions include detailed steps and notes about specific parts and proper installation. Diagrams are provided to illustrate the components and assembly process.
The document provides instructions for disassembling and assembling various components of a 951C track loader powered by a 3304 engine, including:
- Removing and installing adapter housings and levers on the fuel system
- Removing and installing the speed limiter
- Separating and connecting the governor from the fuel injection pump housing
- Disassembling and assembling the governor
The instructions include detailed steps and notes about specific parts and proper installation. Diagrams are provided to illustrate the components and assembly process.
The document provides instructions for disassembling and assembling various components of a 951C track loader powered by a 3304 engine, including:
- Removing and installing adapter housings and levers on the fuel system
- Removing and installing the speed limiter
- Separating and connecting the governor from the fuel injection pump housing
- Disassembling and assembling the governor
The instructions include detailed steps and notes about specific parts and proper installation. Diagrams are provided to illustrate the components and assembly process.
This document provides instructions for disassembling and assembling components of a sleeve metering fuel system for a track loader, including:
1) Removing and installing adapter housings and levers from the governor housing.
2) Removing and installing the speed limiter from the governor housing.
3) Separating and connecting the governor from the fuel injection pump housing.
4) Disassembling and assembling the governor.
This document provides instructions for disassembling and assembling components of a sleeve metering fuel system for a track loader, including:
1) Removing and installing adapter housings and levers from the governor housing.
2) Removing and installing the speed limiter from the governor housing.
3) Separating and connecting the governor from the fuel injection pump housing.
4) Disassembling and assembling the governor.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...wenxian17880
The document provides instructions for disassembling and assembling components of a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components.
- Removing and installing the inlet manifold (precombustion chamber), which requires disconnecting air lines and removing mounting bolts.
- Removing and installing the aftercooler (direct injection), which involves draining coolant, removing mounting bolts, elbows, and the aftercooler core. Reassembly requires replacing seals and mounting all components back into the housing.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...xiapokang564341
The document provides instructions for disassembling and assembling components of a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components.
- Removing and installing the inlet manifold (precombustion chamber), which requires disconnecting air lines and removing mounting bolts.
- Removing and installing the aftercooler (direct injection), which involves draining coolant, removing mounting bolts, elbows, and the aftercooler core. Reassembly requires replacing seals and mounting all components back into the housing.
Caterpillar Cat 245 EXCAVATOR (Prefix 95V) Service Repair Manual (95V00001-00...hvy7sbkw8e
The document provides instructions for disassembling and assembling components of a 245 Excavator model 95V engine, including:
- Removing and installing the fuel injection pump housing, which involves disassembling the pumps and housing components.
- Removing and installing the inlet manifold (precombustion chamber), which requires disconnecting air lines and removing mounting bolts.
- Removing and installing the aftercooler (direct injection), which involves draining coolant, removing mounting bolts, elbows, and the aftercooler core. Reassembly requires replacing seals and mounting all components back into the housing.
The document provides instructions for disassembling and assembling various components of a 951C track loader powered by a 3304 engine, including:
- Removing and installing adapter housings and levers on the fuel system
- Removing and installing the speed limiter
- Separating and connecting the governor from the fuel injection pump housing
- Disassembling and assembling the governor
The instructions include detailed steps and notes about specific parts and proper installation. Diagrams are provided to illustrate the components and assembly process.
The document provides instructions for disassembling and assembling various components of a 951C track loader powered by a 3304 engine, including:
- Removing and installing adapter housings and levers on the fuel system
- Removing and installing the speed limiter
- Separating and connecting the governor from the fuel injection pump housing
- Disassembling and assembling the governor
The instructions include detailed steps and notes about specific parts and proper installation. Diagrams are provided to illustrate the components and assembly process.
The document provides instructions for disassembling and assembling various components of a 951C track loader powered by a 3304 engine, including:
- Removing and installing adapter housings and levers on the fuel system
- Removing and installing the speed limiter
- Separating and connecting the governor from the fuel injection pump housing
- Disassembling and assembling the governor
The instructions include detailed steps and notes about specific parts and proper installation. Diagrams are provided to illustrate the components and assembly process.
This document provides instructions for disassembling and assembling components of a sleeve metering fuel system for a track loader, including:
1) Removing and installing adapter housings and levers from the governor housing.
2) Removing and installing the speed limiter from the governor housing.
3) Separating and connecting the governor from the fuel injection pump housing.
4) Disassembling and assembling the governor.
This document provides instructions for disassembling and assembling components of a sleeve metering fuel system for a track loader, including:
1) Removing and installing adapter housings and levers from the governor housing.
2) Removing and installing the speed limiter from the governor housing.
3) Separating and connecting the governor from the fuel injection pump housing.
4) Disassembling and assembling the governor.
This document provides instructions for disassembling and assembling components of a sleeve metering fuel system for a track loader, including:
1) Removing and installing adapter housings and levers from the governor housing.
2) Removing and installing the speed limiter from the governor housing.
3) Separating and connecting the governor from the fuel injection pump housing.
4) Disassembling and assembling the governor.
This document provides instructions for removing and installing various components of a D7F track-type tractor engine. The components include the timing gear cover, camshaft, flywheel, crankshaft rear seal, power take-off drive gears and bearings, and removing the entire engine. Detailed steps are provided for each component, including preparatory steps, individual installation and removal steps, and concluding steps.
This document provides instructions for removing and installing various components of a D7F track-type tractor engine. The components include the timing gear cover, camshaft, flywheel, crankshaft rear seal, power take-off drive gears and bearings, and removing the entire engine. Detailed steps are provided for each component, including preparatory steps, individual installation and removal steps, and concluding steps.
This document provides instructions for removing and installing various components of a D7F track-type tractor engine. It includes steps for the timing gear cover, camshaft, flywheel, crankshaft rear seal, power take-off drive gears and bearings, and removing the entire engine. The document provides detailed preparatory steps and numbered instructions for each component.
This document provides instructions for disassembling and assembling various components of a Caterpillar 3306 vehicular engine, including the governor, fuel transfer pump, fuel check valve, bypass valve, fuel injection pumps, and hood/muffler/precleaner assembly. It describes removing and installing each part in 3 sentences or less, noting key steps like using specific tools, installing parts in their original positions, and ensuring proper orientation of seals and other components.
This document provides instructions for disassembling and assembling various components of a Caterpillar 3306 vehicular engine, including the governor, fuel transfer pump, fuel check valve, bypass valve, fuel injection pumps, and hood/muffler/precleaner assembly. It lists the specific parts to remove and install for each component, and the order and important notes for the process. Disassembly generally involves removing covers, seals, springs, pins, and internal parts. Reassembly follows the reverse order and notes proper orientation of parts.
This document provides instructions for disassembling and assembling various components of a 977K Track Loader engine, including the governor, fuel transfer pump, fuel check valve, fuel injection pumps, and hood/muffler/precleaner assembly. It describes removing and installing each part in 3 sentences or less per component, identifying start and end steps and noting important details like installation order and specific tools required.
This document provides instructions for removing and installing fuel injection lines and an automatic timing advance on a 3406 engine for a generator set. The steps include removing nuts and bolts to detach the lines and timing advance, cleaning surfaces, installing new gaskets, and tightening to the specified torques. Disassembly and assembly of the automatic timing advance and fuel transfer pump are also described in detail with accompanying diagrams.
Caterpillar cat 277 d multi terrain loader (prefix fmt) service repair manual...jjskefkskemik
This service manual provides instructions for removing and installing various engine components on a 277D Multi Terrain Loader, including the diesel particulate filter, inlet manifold, valve springs, valves, and valve guides. The procedures describe disconnecting hoses and sensors, removing mounting bolts, using specialty tools to compress springs, and reinstalling components in the reverse order of removal while following torque specifications. Safety precautions are provided to prevent injury when handling hot or pressurized parts.
Caterpillar cat 277 d multi terrain loader (prefix fmt) service repair manual...ufjjdkskemmd
This service manual provides instructions for removing and installing various engine components on a 277D Multi Terrain Loader, including the diesel particulate filter, inlet manifold, valve springs, valves, and valve guides. The procedures describe disconnecting hoses and sensors, removing mounting bolts, and installing components in the reverse order of removal while following torque specifications. Safety precautions are provided for hot and pressurized components.
Caterpillar cat 277 d multi terrain loader (prefix fmt) service repair manual...ufjjskekkmde
This service manual provides instructions for removing and installing various engine components on a 277D Multi Terrain Loader, including the diesel particulate filter, inlet manifold, valve springs, valves, and valve guides. The procedures describe disconnecting hoses and sensors, removing mounting bolts, and installing components in the reverse order of removal while following torque specifications. Safety precautions are provided for hot and pressurized components.
Caterpillar cat 277 d multi terrain loader (prefix fmt) service repair manual...fujsjfkkskefsme
This document provides instructions for removing and installing various engine components on a 277D Multi Terrain Loader, including the diesel particulate filter, inlet manifold, and inlet/exhaust valves. The procedures describe disconnecting hoses and sensors, removing mounting bolts, and replacing components in the reverse order of removal while following torque specifications. Safety precautions are provided for hot and pressurized components.
Kubota B1710D Tractor Parts Catalogue Manual (Publishing ID BKIDK0391).pdfjnnfnjsdnnd
This document provides a parts list for frequently used engine parts. It includes the part number, name in Polish and English, quantity, serial number, weight, and remarks for each part. Common parts listed include starters, switches, fuses, filters, gaskets, bolts, and more. The document is published by Kubota and copyrighted for 2015.
Kubota B1700-HD Tractor Parts Catalogue Manual (Publishing ID BKIDA0020).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota B1700-HD engine, including the crankcase, oil pan, cylinder head, gear case, and head cover. It lists 170 part numbers, part names in Polish and English, quantities, serial numbers if applicable, weights in kg, and other remarks. The parts list is divided into sections for the main engine components and subsections for individual parts within each component.
Volvo EC55-2 Compact Excavator Parts Catalogue Manual – SN 5001 - 7620.pdfjnnfnjsdnnd
This document contains specifications for various engine parts for a Volvo EC55-2 engine. It includes sections for the engine, cylinder head, valves, pistons, connecting rods, camshaft, and other components. Each section lists the relevant part numbers, descriptions, quantities, and other details. The document provides an extensive catalogue of replacement parts for this engine model.
Kubota B1241D-EC-F2-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA516...jnnfnjsdnnd
This document provides a parts list for frequently used items and their information. It includes 30 parts ranging from switches and fuses to hoses and filters. Each part is listed with its number, name in Polish and English, quantity, and other identifying information like serial number and weight. The document is copyrighted by KUBOTA in 2015.
Kubota B1700D Tractor Parts Catalogue Manual (Publishing ID BKIDK0093).pdfjnnfnjsdnnd
This document provides a parts list for a crankcase (Kurbelgehäuse) with part numbers, names, quantities, serial numbers, and other details. It lists over 200 individual part numbers. The parts are for various engine components, including the crankcase, oil pan, cylinder head, gear case, and head cover.
Kubota B1181DT-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA51...jnnfnjsdnnd
This document provides a parts list for the main bearing case of an engine. It includes the part numbers, names, quantities, and other details for over 20 parts that make up the main bearing case assembly. Key components listed include the main bearing case group, bearing case cover, oil seal, gaskets, bolts, and bearing shells. The document also provides copyright information at the bottom of each page.
Kubota B1241D-EC-F Tractor Parts Catalogue Manual (Publishing ID BKIDA5131).pdfjnnfnjsdnnd
This document provides a list of parts for an engine. It includes the part numbers, names in Polish and English, quantities, and other specifications for 230 different engine parts organized into categories like crankcase, oil pan, cylinder head, gear case, and head cover. The parts range from bolts, nuts, and plugs to larger assemblies and components like the crankcase, cylinder head, and gear case.
Kubota B1181D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5129).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota engine. It includes 230 parts ranging from starters, switches, fuses, filters, hoses, belts, and other engine components. Each part is listed with the part number, name in Polish and English, quantity, serial number if applicable, weight, and any remarks. It appears to be a comprehensive listing of components for a Kubota engine.
Kubota B1121D-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA515...jnnfnjsdnnd
This document provides a parts list for the main bearing case of an engine. It includes the part numbers, names, quantities, and other details for over 100 individual parts that make up the main bearing case assembly. The parts include the main bearing case group, bolts, pins, seals, gaskets, covers, and bearings.
Kubota B1161D-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA515...jnnfnjsdnnd
This document provides a list of parts for a Kubota engine crankcase assembly. It includes 140 individual parts with information on part numbers, names, quantities, and other specifications. The crankcase assembly consists of a composite crankcase component as the main part, along with various caps, plugs, pins, bolts, and other fittings that make up the full assembly. Safety precautions are noted for proper handling of the engine parts.
More Related Content
Similar to Caterpillar Cat D7F TRACK-TYPE TRACTOR (Prefix 93N) Service Repair Manual (93N01175 and up).pdf
This document provides instructions for disassembling and assembling components of a sleeve metering fuel system for a track loader, including:
1) Removing and installing adapter housings and levers from the governor housing.
2) Removing and installing the speed limiter from the governor housing.
3) Separating and connecting the governor from the fuel injection pump housing.
4) Disassembling and assembling the governor.
This document provides instructions for removing and installing various components of a D7F track-type tractor engine. The components include the timing gear cover, camshaft, flywheel, crankshaft rear seal, power take-off drive gears and bearings, and removing the entire engine. Detailed steps are provided for each component, including preparatory steps, individual installation and removal steps, and concluding steps.
This document provides instructions for removing and installing various components of a D7F track-type tractor engine. The components include the timing gear cover, camshaft, flywheel, crankshaft rear seal, power take-off drive gears and bearings, and removing the entire engine. Detailed steps are provided for each component, including preparatory steps, individual installation and removal steps, and concluding steps.
This document provides instructions for removing and installing various components of a D7F track-type tractor engine. It includes steps for the timing gear cover, camshaft, flywheel, crankshaft rear seal, power take-off drive gears and bearings, and removing the entire engine. The document provides detailed preparatory steps and numbered instructions for each component.
This document provides instructions for disassembling and assembling various components of a Caterpillar 3306 vehicular engine, including the governor, fuel transfer pump, fuel check valve, bypass valve, fuel injection pumps, and hood/muffler/precleaner assembly. It describes removing and installing each part in 3 sentences or less, noting key steps like using specific tools, installing parts in their original positions, and ensuring proper orientation of seals and other components.
This document provides instructions for disassembling and assembling various components of a Caterpillar 3306 vehicular engine, including the governor, fuel transfer pump, fuel check valve, bypass valve, fuel injection pumps, and hood/muffler/precleaner assembly. It lists the specific parts to remove and install for each component, and the order and important notes for the process. Disassembly generally involves removing covers, seals, springs, pins, and internal parts. Reassembly follows the reverse order and notes proper orientation of parts.
This document provides instructions for disassembling and assembling various components of a 977K Track Loader engine, including the governor, fuel transfer pump, fuel check valve, fuel injection pumps, and hood/muffler/precleaner assembly. It describes removing and installing each part in 3 sentences or less per component, identifying start and end steps and noting important details like installation order and specific tools required.
This document provides instructions for removing and installing fuel injection lines and an automatic timing advance on a 3406 engine for a generator set. The steps include removing nuts and bolts to detach the lines and timing advance, cleaning surfaces, installing new gaskets, and tightening to the specified torques. Disassembly and assembly of the automatic timing advance and fuel transfer pump are also described in detail with accompanying diagrams.
Caterpillar cat 277 d multi terrain loader (prefix fmt) service repair manual...jjskefkskemik
This service manual provides instructions for removing and installing various engine components on a 277D Multi Terrain Loader, including the diesel particulate filter, inlet manifold, valve springs, valves, and valve guides. The procedures describe disconnecting hoses and sensors, removing mounting bolts, using specialty tools to compress springs, and reinstalling components in the reverse order of removal while following torque specifications. Safety precautions are provided to prevent injury when handling hot or pressurized parts.
Caterpillar cat 277 d multi terrain loader (prefix fmt) service repair manual...ufjjdkskemmd
This service manual provides instructions for removing and installing various engine components on a 277D Multi Terrain Loader, including the diesel particulate filter, inlet manifold, valve springs, valves, and valve guides. The procedures describe disconnecting hoses and sensors, removing mounting bolts, and installing components in the reverse order of removal while following torque specifications. Safety precautions are provided for hot and pressurized components.
Caterpillar cat 277 d multi terrain loader (prefix fmt) service repair manual...ufjjskekkmde
This service manual provides instructions for removing and installing various engine components on a 277D Multi Terrain Loader, including the diesel particulate filter, inlet manifold, valve springs, valves, and valve guides. The procedures describe disconnecting hoses and sensors, removing mounting bolts, and installing components in the reverse order of removal while following torque specifications. Safety precautions are provided for hot and pressurized components.
Caterpillar cat 277 d multi terrain loader (prefix fmt) service repair manual...fujsjfkkskefsme
This document provides instructions for removing and installing various engine components on a 277D Multi Terrain Loader, including the diesel particulate filter, inlet manifold, and inlet/exhaust valves. The procedures describe disconnecting hoses and sensors, removing mounting bolts, and replacing components in the reverse order of removal while following torque specifications. Safety precautions are provided for hot and pressurized components.
Similar to Caterpillar Cat D7F TRACK-TYPE TRACTOR (Prefix 93N) Service Repair Manual (93N01175 and up).pdf (12)
Kubota B1710D Tractor Parts Catalogue Manual (Publishing ID BKIDK0391).pdfjnnfnjsdnnd
This document provides a parts list for frequently used engine parts. It includes the part number, name in Polish and English, quantity, serial number, weight, and remarks for each part. Common parts listed include starters, switches, fuses, filters, gaskets, bolts, and more. The document is published by Kubota and copyrighted for 2015.
Kubota B1700-HD Tractor Parts Catalogue Manual (Publishing ID BKIDA0020).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota B1700-HD engine, including the crankcase, oil pan, cylinder head, gear case, and head cover. It lists 170 part numbers, part names in Polish and English, quantities, serial numbers if applicable, weights in kg, and other remarks. The parts list is divided into sections for the main engine components and subsections for individual parts within each component.
Volvo EC55-2 Compact Excavator Parts Catalogue Manual – SN 5001 - 7620.pdfjnnfnjsdnnd
This document contains specifications for various engine parts for a Volvo EC55-2 engine. It includes sections for the engine, cylinder head, valves, pistons, connecting rods, camshaft, and other components. Each section lists the relevant part numbers, descriptions, quantities, and other details. The document provides an extensive catalogue of replacement parts for this engine model.
Kubota B1241D-EC-F2-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA516...jnnfnjsdnnd
This document provides a parts list for frequently used items and their information. It includes 30 parts ranging from switches and fuses to hoses and filters. Each part is listed with its number, name in Polish and English, quantity, and other identifying information like serial number and weight. The document is copyrighted by KUBOTA in 2015.
Kubota B1700D Tractor Parts Catalogue Manual (Publishing ID BKIDK0093).pdfjnnfnjsdnnd
This document provides a parts list for a crankcase (Kurbelgehäuse) with part numbers, names, quantities, serial numbers, and other details. It lists over 200 individual part numbers. The parts are for various engine components, including the crankcase, oil pan, cylinder head, gear case, and head cover.
Kubota B1181DT-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA51...jnnfnjsdnnd
This document provides a parts list for the main bearing case of an engine. It includes the part numbers, names, quantities, and other details for over 20 parts that make up the main bearing case assembly. Key components listed include the main bearing case group, bearing case cover, oil seal, gaskets, bolts, and bearing shells. The document also provides copyright information at the bottom of each page.
Kubota B1241D-EC-F Tractor Parts Catalogue Manual (Publishing ID BKIDA5131).pdfjnnfnjsdnnd
This document provides a list of parts for an engine. It includes the part numbers, names in Polish and English, quantities, and other specifications for 230 different engine parts organized into categories like crankcase, oil pan, cylinder head, gear case, and head cover. The parts range from bolts, nuts, and plugs to larger assemblies and components like the crankcase, cylinder head, and gear case.
Kubota B1181D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5129).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota engine. It includes 230 parts ranging from starters, switches, fuses, filters, hoses, belts, and other engine components. Each part is listed with the part number, name in Polish and English, quantity, serial number if applicable, weight, and any remarks. It appears to be a comprehensive listing of components for a Kubota engine.
Kubota B1121D-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA515...jnnfnjsdnnd
This document provides a parts list for the main bearing case of an engine. It includes the part numbers, names, quantities, and other details for over 100 individual parts that make up the main bearing case assembly. The parts include the main bearing case group, bolts, pins, seals, gaskets, covers, and bearings.
Kubota B1161D-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA515...jnnfnjsdnnd
This document provides a list of parts for a Kubota engine crankcase assembly. It includes 140 individual parts with information on part numbers, names, quantities, and other specifications. The crankcase assembly consists of a composite crankcase component as the main part, along with various caps, plugs, pins, bolts, and other fittings that make up the full assembly. Safety precautions are noted for proper handling of the engine parts.
Kubota B1161D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5128).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota engine. It includes 230 parts ranging from starters, switches, fuses, filters, hoses, belts, and other engine components. Each part is listed with the part number, name in Polish and English, quantity, serial number if applicable, weight, and any remarks. This extensive list details all replacement parts for the engine.
Kubota B1121D-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA5156).pdfjnnfnjsdnnd
This document contains parts information for a Kubota engine, including the part numbers, names, quantities, and weights of various engine components. It lists 190 line items of parts organized into categories like crankcase, oil pan, cylinder head, gear case, and more. The document is in two languages, with the part names listed in both Polish and English.
Kubota B1121D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5127).pdfjnnfnjsdnnd
This document provides a parts list for an engine. It includes 260 parts related to the engine, such as the crankcase, cylinder head, oil pan, gear case, and more. Each part is listed with its number, name in Polish and English, quantity, and other specifications. It appears to be a comprehensive listing of engine parts for reference when maintaining or repairing the engine.
Kubota B1121D Tractor Parts Catalogue Manual (Publishing ID BKIDA5126).pdfjnnfnjsdnnd
This document contains parts information for a Kubota engine. It lists 190 parts in the engine's crankcase, oil pan, cylinder head, gear case, head cover, oil filter, dipstick/guide, and oil pump systems. The parts are identified by number, name in Polish and English, quantity, and other specifications. Kubota claims copyright of the document from 2015.
The document provides instructions for removing the planetary carrier from the final drive of a D9R track-type tractor. It describes:
1) Removing the axles, cover, and bolts to access the carrier.
2) Using an adapter tool to lift the carrier out of the final drive hub.
3) Removing the sun gear from the carrier.
It then provides detailed steps and illustrations for safely removing and installing the carrier while supporting the surrounding components.
The document provides instructions for disassembling and assembling the final drive of a D7R track-type tractor. It lists 30 steps for disassembly, including removing gears, shafts, bearings and seals. It also lists 25 steps for assembly, installing components in reverse order and noting proper alignment and clearance measurements. Required specialized tools are listed for various removal and installation tasks.
This document provides instructions for installing and removing various components of a Caterpillar 3412E engine, including:
1) Installing the aftercooler housing and core on a 3408E/3412E engine.
2) Removing and installing the front engine support on a 3408E/3412E engine.
3) Removing the rear gear group from a 3408E/3412E engine, which involves disassembling various gears, bearings, and shafts.
4) Installing the rear gear group on a 3408E/3412E engine, which involves assembling the various gears, bearings, and shafts.
The document provides instructions for removing and installing a cylinder head on a Caterpillar D9N track-type tractor powered by a 3408 engine. It describes:
1) Removing hoses, tubes, bolts and the fuel manifold to access the cylinder head.
2) Attaching lifting tools and removing the cylinder head, which weighs approximately 90-172 kg depending on the engine model.
3) Cleaning and inspecting parts, applying a new gasket and reinstalling the cylinder head along with associated components like seals and bolts. Tightening bolts in a specific sequence is emphasized.
The document provides instructions for removing, disassembling, and installing a compression brake on a Caterpillar D7R track-type tractor. It describes removing the valve mechanism cover, then removing the compression brake by lifting it out while holding the oil tube. It also details disassembling the compression brake by removing pistons, springs, seals and other components. The assembly process is described as well, including installing new seals and pistons before reinstalling the compression brake.
The document provides instructions for disassembling a steering planetary and brake assembly. Key steps include:
1. Removing the final drive, planetary group, and brake assembly from the machine.
2. Separating the planetary group and brake assembly from the final drive hub using lifting brackets and forcing bolts.
3. Further disassembling the planetary group and brake assembly by removing housing components like ring gears, plates, and carriers to access internal parts like gears, shafts, pins, and seals.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D7F TRACK-TYPE TRACTOR 93N
Configuration: D7F TRACTOR 93N01175-UP (MACHINE)
Disassembly and Assembly
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Media Number -REG01400-01 Publication Date -01/03/1974 Date Updated -17/03/2010
REG014000004
Adapter Housings And Levers
SMCS - 1278-15; 1278-16; 1278-11; 1278-12
Remove Adapter Housings And Levers (If So Equipped)
start by:
a) remove fuel ratio control
b) remove fuel shutoff solenoid
1. Remove adapter housing (1) from governor housing.
NOTE: There are two different adapter housings used with the fuel system. Adapter housing (1) is
used when only a fuel ratio control is needed. Adapter housing (3) is used when a combination of
fuel ratio control, fuel shutoff solenoid and oil pressure safety shutoff is needed.
1/3
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. 2. Remove control lever (2) or (4) from shaft.
NOTE: There is a different control lever for each adapter housing. On a truck fuel system, there is
a spring between the lever and governor housing.
3. Remove shaft (8), lever assembly (7) and lever (6) from adapter housing.
4. Remove seal (5) from adapter housing.
5. Remove base (9) from governor housing.
Install Adapter Housings And Levers (If So Equipped)
1. Install base (1) on governor housing.
2. Install control lever (2) on shaft which is for adapter housing (5).
3. Check the distance between the governor housing and inside of lever (2). This distance must
be .438 ± .010 in. (11.13 ± 0.25 mm) with the shaft pulled out tight against the governor housing.
2/3
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 4. Install control lever (3) which is for the adapter housing that has fuel ratio control only.
5. Check the distance between the inside of lever (3) and governor housing. This distance must
be .590 ± .010 in. (14.99 ± 0.25 mm) with the shaft pulled out tight against the inside of the
governor housing.
NOTE: On a truck fuel system, there is a spring (4) between the lever and governor housing. This
spring must be turned (wound) 1 1/4 turns clockwise to get a preload when installed.
6. Install seal in adapter housing.
7. Install lever, lever assembly and shaft.
8. Install adapter housing (5) on base.
end by:
a) install fuel shutoff solenoid
b) install fuel ratio control
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Nov 20 07:35:36 UTC+0800 2021
3/3
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D7F TRACK-TYPE TRACTOR 93N
Configuration: D7F TRACTOR 93N01175-UP (MACHINE)
Disassembly and Assembly
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Media Number -REG01400-01 Publication Date -01/03/1974 Date Updated -17/03/2010
REG014000005
Speed Limiter
SMCS - 1268-11; 1268-12
Sleeve Metering Fuel System With Speed Limiter (Earlier Fuel Systems)
Remove Speed Limiter (Earlier Fuel Systems)
1/2
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 1. Remove the bolts (1) and washers that hold the cover (2) to governor housing. Remove the cover
(2).
2. Remove the diaphragm from governor housing.
3. Remove the plunger (4) and spring (3) from governor housing.
4. Remove the body (5) from the governor housing.
Install Speed Limiter (Earlier Fuel Systems)
1. Install the body, spring, and plunger (1).
2. Install the diaphragm (2) and cover.
3. Install the bolts (3) and washers.
4. See ADJUSTMENT of SPEED LIMITER in TESTING AND ADJUSTING.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Nov 20 07:36:33 UTC+0800 2021
2/2
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D7F TRACK-TYPE TRACTOR 93N
Configuration: D7F TRACTOR 93N01175-UP (MACHINE)
Disassembly and Assembly
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Media Number -REG01400-01 Publication Date -01/03/1974 Date Updated -17/03/2010
REG014000006
Fuel Injection Pump Housing And Governor
SMCS - 1268-11; 1268-12
Separation Of Governor From Fuel Injection Pump Housing
1. Put the fuel injection pump housing on tool (A).
2. Remove bolts (1) that hold the governor housing (2) to the fuel injection pump housing.
1/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. 3. Remove governor housing (2) from pump housing.
4. Remove cover (5) over the torque spring.
5. Remove spring (8), (wave) washer (7) and guide (6) from governor housing.
6. Remove seat (3) and over fueling spring (4).
7. Pull shaft (9) up and remove shaft and lever from the housing.
8. Remove torque spring assembly (10) and pin.
NOTE: Some fuel systems do not have a torque spring. They have only a stop.
9. Remove riser (follower) (11) from the shaft.
10. Remove ring and lever (12) from the dowel.
11. Remove cover (13) for the flyweights with tool (B).
NOTE: Tool (B) can cause damage to the cover. Always inspect cover and install a new cover if
needed.
2/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 12. Install timing pin (14) to hold the camshaft from turning.
13. Remove bolts (15) that hold flyweight assembly to camshaft.
14. Remove the flyweight assembly (16) from the fuel injection pump housing.
15. Remove the timing pin from the housing.
Connection Of Governor To Fuel Injection Pump Housing
1. Put the fuel injection pump housing on tool (A).
2. Install timing pin (1) to keep the camshaft from turning.
3. Put flyweight assembly (2) in position on the camshaft.
3/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. NOTICE
Be sure pin (3) that holds shaft is in the correct position on back of the
flyweight assembly.
4. Install new bolts for the flyweight assembly.
NOTE: The bolts for the flyweight assembly have a locking material on the threads and must not
be used more than one time.
5. Install cover over the flyweight assembly with tool (B).
6. Grind a taper on the bottom edge of a 1/8" screwdriver (4). Install the screwdriver through the
bolt hole in the governor housing. The screwdriver must fit evenly against the flyweight assembly
cover. Make a mark (stake) in four places around the cover in line with the groove in the camshaft.
NOTICE
Never install a used flyweight cover that is bent.
4/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 7. Install lever (5) on the dowel. Install ring (6) that holds lever on dowel.
8. Install pin (7) in the housing with the round end down.
9. Put riser (follower) (10) in position between the flyweights. Lift the flyweight up with a piece
of wire and push riser (follower) forward.
10. Put lever (9) into position in groove of riser (follower) (10) and ball end engaged in the sleeve
shaft lever (8). Install shaft to hold lever in place.
NOTICE
If lever (9) is not installed correctly, the governor cannot operate and
can cause the engine to over speed.
5/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. 11. Install over fueling spring (13) and seat (12) on shaft.
12. Install stud (14) and torque spring or stop bar (11) on the housing.
NOTICE
The screw that holds the torque spring must not go beyond the inner
surface of the governor housing.
13. Install cover (15) over torque spring after adjustment has been made.
14. Install guide, (wave) washer and spring (16) in the governor housing.
15. Put the governor housing on the fuel injection pump housing and install the bolts.
end by:
a) make adjustment of fuel system setting (See Fuel System Setting in Testing and Adjusting)
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Nov 20 07:37:30 UTC+0800 2021
6/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D7F TRACK-TYPE TRACTOR 93N
Configuration: D7F TRACTOR 93N01175-UP (MACHINE)
Disassembly and Assembly
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Media Number -REG01400-01 Publication Date -01/03/1974 Date Updated -17/03/2010
REG014000007
Governor
SMCS - 1264-15; 1264-16
Disassemble Governor
start by:
a) separation of governor from fuel injection pump housing
1. Remove shaft (2). Remove pin (1) from shaft.
2. Remove pins (3) from the flyweights. Remove flyweights (4).
3. Remove ring, races (6) and bearing from the riser (follower) (5).
1/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 4. Remove cover (7) and spring (8) from governor housing.
NOTE: There is force on the cover from the spring.
5. Remove seal (9) from cover.
6. Remove cover (10) for the low and high idle adjustment.
7. Remove locknut and screw (13) for the high idle adjustment.
8. Remove bolt (15) and washers for the low idle adjustment.
9. Remove spring (16) and guide.
10. Remove pin (14) and plate (11).
11. Remove shaft (12) from the housing.
12. Remove pin (18) and two spacers (17) from shaft.
NOTE: Earlier fuel systems have a ball in place of spacers (17) and pin (18).
2/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 13. Remove shaft (19) from the governor housing.
14. Remove washer (20) and levers (21) and (22) from governor housing.
15. Remove cover (23) from governor housing.
16. Remove seal (25) and bearing.
17. Remove seals (24) and (26) from governor housing.
Assemble Governor
3/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 1. Install bearing and seal in the housing with tool (A). The lip of the seal must be toward the
bearing.
2. Install seal (1) in housing with tool (A). The lip of seal must be toward inside of housing.
3. Install seal (2) in housing with tooling (B). The lip of seal must be toward the inside of housing.
4. Install shaft (3) in the housing.
5. Install plates (4), spacers (8) and pin (7) on shaft.
6. Install shaft (5) in housing and through washer (9) and levers (6).
7. Install pin (11) in holes of the plates.
8. Install screw (10) and locknut for high idle adjustment.
4/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. 9. Install spring (13) and guide.
10. Install bolts (12) and washer for low idle adjustment.
11. Push plate and pin (11) over toward the bolt (12) and tighten the bolt.
12. Install seal in cover with tooling (B). The lip of seal must be toward the inside.
13. Install spring (15) in the cover. Install cover (14) on housing.
NOTICE
The spring (15) must be installed with the end of spring as shown.
14. Install cover (16) for the idle adjustment screws.
5/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 15. Install bearing (19) between the races (18) on riser (follower) (17). Install ring (20) that holds
the washers on the riser (follower).
16. Install pin in shaft (23).
17. Install flyweights (22) and pin (21).
18. Install shaft (23) in the flyweight assembly.
end by:
a) connection of governor to fuel injection pump housing
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Nov 20 07:38:26 UTC+0800 2021
6/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D7F TRACK-TYPE TRACTOR 93N
Configuration: D7F TRACTOR 93N01175-UP (MACHINE)
Disassembly and Assembly
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Media Number -REG01400-01 Publication Date -01/03/1974 Date Updated -17/03/2010
REG014000008
Fuel Check Valve And Bypass Valve
SMCS - 1264-15; 1264-16
Remove Fuel Check Valve And Bypass Valve
1. Remove fuel from the pump housing and install on tool (A).
2. Remove cover (2) from top cover.
3. Remove fuel inlet and return housing (1) from top cover.
1/4
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. 4. Remove elbow (3) and disc (4) from fuel inlet and return housing.
NOTE: The function of the disc (4) is to keep the fuel in the pump housing from returning to the
tank when the engine is not in operation. If the fuel tank is higher than the fuel pump housing, disc
and housing is not needed.
5. Remove cover (5) and fuel channel from pump housing.
6. Remove spring and bypass valve (6) from housing.
7. Remove check valve (7).
8. Remove fuel channel (8) and check valve from cover.
9. Remove check valve (9) and spring from fuel channel.
NOTE: Earlier fuel systems have two check valves (7) and (9). Check valve (9) is not needed.
Remove check valve (9) and fill the hole in fuel channel with weld or replace channel.
Install Fuel Check Valve And Bypass Valve
1. Install fuel channel (1) on cover (2).
2/4
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. 2. Install spring and bypass valve (4) in housing with the rounded end up.
3. Install check valve (3) evenly in pump housing.
NOTE: Do not install a check valve that is bent.
4. Install cover on pump housing. Be sure the bypass valve spring is in the groove in the cover.
5. Install disc (5) and elbow on fuel inlet and return housing.
6. Install fuel inlet and return housing (6) on cover (8).
7. Install cover (7) on cover (8).
8. Remove fuel injection pump housing and governor from tool (A).
3/4
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D7F TRACK-TYPE TRACTOR 93N
Configuration: D7F TRACTOR 93N01175-UP (MACHINE)
Disassembly and Assembly
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Media Number -REG01400-01 Publication Date -01/03/1974 Date Updated -17/03/2010
REG014000009
Fuel Injection Pumps
SMCS - 1251-11; 1251-12; 1251-15; 1251-16
Fuel Injection Pump And Housing
1/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Remove Fuel Injection Pumps
NOTICE
Before any service work is to be done on the fuel system the outer
surface of injection pump housing must be clean.
1. Remove the cover assembly (1) from the pump housing. Remove spring for the bypass valve.
3/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. 2. Loosen the bushing (2) from the pump housing with tool (A).
NOTE: Do not loosen the screws (3) that hold levers to shaft when removing or installing pumps.
If levers are moved, fuel pump adjustment will be changed.
3. Remove the fuel injection pump from the pump housing. The sleeve on the plunger will slide
off the lever as the pump is removed.
Install Fuel Injection Pumps
1. Put the fuel injection pump (1) in the bore of pump housing.
2. The sleeve (2) will be engaged with lever when installed correctly.
NOTICE
If levers have been moved on the shaft, fuel pump adjustment must be
made. (See TESTING AND ADJUSTING).
3. Tighten the bushing with wrench (A) to a torque of 70 ± 5 lb.ft. (9.7 ± 0.7 mkg).
4/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
27. 4. Put the spring on the bypass valve. Install the cover assembly on the pump housing. Be sure the
spring (4) is in position in the cover.
Disassemble Fuel Injection Pumps
start by:
a) remove fuel injection pumps
1. Remove the bushing (1) from the bonnet (2).
2. Remove the ring (3) from the bonnet and barrel (7). Remove the check valve (6) and spring (4)
from the bonnet.
3. Remove the spring (8) and washer (5). Remove the plunger (9) and sleeve (10).
NOTE: Keep the plunger and sleeve with their respective barrel for installation. Do not use
plungers, sleeves, and barrels with other plungers, sleeves, and barrels.
Assemble Fuel Injection Pumps
5/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. 1. Install the sleeve (4), plunger (5), spring (2), and washer (3) on the barrel (1).
NOTE: Be sure sleeve and plunger are installed in original barrel, and large hole in plunger is up.
2. Install check valve and spring in bonnet. Connect the barrel and bonnet and install the ring.
Install the bushing on the bonnet.
end by:
a) install fuel injection pumps
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Nov 20 07:40:20 UTC+0800 2021
6/6
D7F TRACTOR 93N01175-UP (MACHINE)(UEG0736S - 00) - Documentation
2021/11/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...