This document provides instructions for removing and installing various engine components on a Caterpillar D6R track-type tractor, including:
- Removing the valve mechanism cover and gasket
- Removing the valve mechanism cover base and seal
- Removing the cylinder head by draining coolant, disconnecting harnesses and tubes, removing bolts, and lifting it off using a bracket and lifting device.
Caterpillar cat d8 r ii track type tractor dozer bulldozer (prefix aka) servi...ufuusefjjsekkm
The document provides instructions for servicing the transmission of a Caterpillar D8R II track-type tractor. It describes how to remove the transmission and separate it from the bevel gears. The transmission disassembly procedure involves removing various components like tubes, fittings, valves, seals and rotors. Tools needed are also listed to properly support the heavy transmission components during disassembly and prevent injury.
Caterpillar cat d8 r ii track type tractor dozer bulldozer (prefix aka) servi...fjjsekkmdmes
The document provides instructions for servicing the transmission of a Caterpillar D8R II track-type tractor. It describes how to remove the transmission and separate it from the bevel gears. The transmission disassembly procedure involves removing various components like tubes, fittings, valves, seals and rotors. Tools needed are also listed to properly support the heavy transmission components during disassembly and prevent injury.
Caterpillar cat d8 r ii track type tractor dozer bulldozer (prefix aka) servi...fjsekskemmm
The document provides instructions for servicing the transmission of a Caterpillar D8R II track-type tractor. It describes how to remove the transmission and separate it from the bevel gears. The transmission disassembly procedure involves removing various components like tubes, fittings, valves, seals and rotors. Tools needed are also listed to properly support the heavy transmission components during disassembly and prevent injury.
The document provides instructions for servicing the transmission of a D8R II track-type tractor. It describes removing the transmission and separating it from the bevel gears. The transmission is then disassembled by removing various components like fittings, tubes, valves, covers, and internal parts like rotors. Tools needed are listed and each step includes illustrations to identify the specific components and orientation during removal and disassembly.
The document provides instructions for servicing the transmission of a Caterpillar D8R II track-type tractor. It describes how to remove the transmission and separate it from the bevel gears. The disassembly procedure involves 22 steps, including removing wiring, hoses, seals and fasteners. Tools including a transmission repair stand, link brackets, pliers and spring compressors are required. Safety precautions are noted, such as ensuring fluids are contained and surfaces are level when removing heavy components.
The document provides instructions for removing, disassembling, and assembling a compression brake on a Caterpillar D7R track-type tractor. It describes removing the valve mechanism cover, then compression brake components like bolts, wires, pistons, springs, and oil tubes. Disassembly involves removing additional parts like retaining rings, clips, and seals. Reassembly requires installing these same components in reverse order while ensuring cleanliness to prevent wear.
The document provides instructions for removing, disassembling, and assembling a compression brake on a Caterpillar D7R track-type tractor. It describes removing the valve mechanism cover, then compression brake components like bolts, wires, pistons, springs, and oil tubes. Disassembly involves removing additional parts like retaining rings, clips, and seals. Reassembly requires installing these same components in reverse order while ensuring cleanliness to prevent premature wear.
The document provides instructions for removing, disassembling, and assembling a compression brake on a Caterpillar D7R track-type tractor. It describes removing the valve mechanism cover, then compression brake components like bolts, wires, pistons, springs, and oil tubes. Disassembly details removing parts like retaining rings and clips from the brake. Reassembly instructs installing pistons, springs, tubes and other components in reverse order. Similarly, it outlines removing, disassembling and assembling a rocker shaft, including removing supports, arms, springs and installing in reverse.
Caterpillar cat d8 r ii track type tractor dozer bulldozer (prefix aka) servi...ufuusefjjsekkm
The document provides instructions for servicing the transmission of a Caterpillar D8R II track-type tractor. It describes how to remove the transmission and separate it from the bevel gears. The transmission disassembly procedure involves removing various components like tubes, fittings, valves, seals and rotors. Tools needed are also listed to properly support the heavy transmission components during disassembly and prevent injury.
Caterpillar cat d8 r ii track type tractor dozer bulldozer (prefix aka) servi...fjjsekkmdmes
The document provides instructions for servicing the transmission of a Caterpillar D8R II track-type tractor. It describes how to remove the transmission and separate it from the bevel gears. The transmission disassembly procedure involves removing various components like tubes, fittings, valves, seals and rotors. Tools needed are also listed to properly support the heavy transmission components during disassembly and prevent injury.
Caterpillar cat d8 r ii track type tractor dozer bulldozer (prefix aka) servi...fjsekskemmm
The document provides instructions for servicing the transmission of a Caterpillar D8R II track-type tractor. It describes how to remove the transmission and separate it from the bevel gears. The transmission disassembly procedure involves removing various components like tubes, fittings, valves, seals and rotors. Tools needed are also listed to properly support the heavy transmission components during disassembly and prevent injury.
The document provides instructions for servicing the transmission of a D8R II track-type tractor. It describes removing the transmission and separating it from the bevel gears. The transmission is then disassembled by removing various components like fittings, tubes, valves, covers, and internal parts like rotors. Tools needed are listed and each step includes illustrations to identify the specific components and orientation during removal and disassembly.
The document provides instructions for servicing the transmission of a Caterpillar D8R II track-type tractor. It describes how to remove the transmission and separate it from the bevel gears. The disassembly procedure involves 22 steps, including removing wiring, hoses, seals and fasteners. Tools including a transmission repair stand, link brackets, pliers and spring compressors are required. Safety precautions are noted, such as ensuring fluids are contained and surfaces are level when removing heavy components.
The document provides instructions for removing, disassembling, and assembling a compression brake on a Caterpillar D7R track-type tractor. It describes removing the valve mechanism cover, then compression brake components like bolts, wires, pistons, springs, and oil tubes. Disassembly involves removing additional parts like retaining rings, clips, and seals. Reassembly requires installing these same components in reverse order while ensuring cleanliness to prevent wear.
The document provides instructions for removing, disassembling, and assembling a compression brake on a Caterpillar D7R track-type tractor. It describes removing the valve mechanism cover, then compression brake components like bolts, wires, pistons, springs, and oil tubes. Disassembly involves removing additional parts like retaining rings, clips, and seals. Reassembly requires installing these same components in reverse order while ensuring cleanliness to prevent premature wear.
The document provides instructions for removing, disassembling, and assembling a compression brake on a Caterpillar D7R track-type tractor. It describes removing the valve mechanism cover, then compression brake components like bolts, wires, pistons, springs, and oil tubes. Disassembly details removing parts like retaining rings and clips from the brake. Reassembly instructs installing pistons, springs, tubes and other components in reverse order. Similarly, it outlines removing, disassembling and assembling a rocker shaft, including removing supports, arms, springs and installing in reverse.
The document provides instructions for removing, disassembling, and installing a compression brake on a Caterpillar D7R track-type tractor. It describes removing the valve mechanism cover, then removing the compression brake by lifting it out while holding the oil tube. It also details disassembling the compression brake by removing pistons, springs, seals and other components. The assembly process is described as well, including installing new seals and pistons before reinstalling the compression brake.
Caterpillar cat 313 d excavator (prefix wpk) service repair manual (wpk00001 ...fjjskejdmdn
The document provides instructions to remove the idler gear from the front gear group of a C4.2 engine. It describes:
1. Using a puller tool to remove the idler gear from the front housing.
2. Cleaning the component parts and ensuring they are free from contaminants before installation to prevent premature wear.
3. Reinstalling the idler gear by pressing it into place in the front housing using an installer tool.
This document provides instructions for removing and installing various components of a 3126B engine for a Caterpillar D5N track-type tractor, including the camshaft, camshaft gear, camshaft bearings, engine oil pan, and piston cooling jets. The procedures describe draining fluids, using required tools, cleaning and applying sealant to mating surfaces, and torquing bolts to specified values. Safety notices are provided to contain fluids and prevent contamination.
This document provides instructions for removing and installing various components of a 3126B engine for a Caterpillar D5N track-type tractor, including the camshaft, camshaft gear, camshaft bearings, engine oil pan, and piston cooling jets. The steps describe draining fluids, identifying and using required tools, and properly aligning parts during assembly to ensure correct timing and operation. Safety notices are included to handle fluids safely and prevent contamination.
This document provides instructions for removing and installing various components of a 3126B engine for a Caterpillar D5N track-type tractor, including the camshaft, camshaft gear, camshaft bearings, and engine oil pan. The procedures describe draining fluids, noting part orientations, using specialty tools, and ensuring proper timing when removing and installing parts like the camshaft. Safety precautions are provided regarding containing fluids and preventing contamination.
This document provides instructions for removing and installing various components of a 3126B engine for a Caterpillar D5N track-type tractor, including the camshaft, camshaft gear, camshaft bearings, engine oil pan, and piston cooling jets. The steps describe draining fluids, identifying and using required tools, and properly aligning parts during assembly to ensure correct timing and operation. Safety notices are included to handle fluids safely and prevent contamination.
This document provides instructions for removing and installing various components of a 3126B engine for a Caterpillar D5N track-type tractor, including the camshaft, camshaft gear, camshaft bearings, engine oil pan, and piston cooling jets. The procedures describe draining fluids, noting part orientations, cleaning surfaces, and tightening bolts to specified torques. Tools required are also listed for some components.
This document provides instructions for removing and installing various components of a 3126B engine for a Caterpillar D5N track-type tractor, including the camshaft, camshaft gear, camshaft bearings, engine oil pan, and piston cooling jets. The detailed procedures include what tools are required, preparation steps, illustrated instructions, and reinstallation steps for each component. Safety notices are provided to keep parts clean and contain fluids properly.
The document provides instructions for removing and installing various components of a Caterpillar C4.2 engine, including the flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear of the front gear group. The procedures include using various tools to remove bolts, nuts, seals, and other parts. Technicians are advised to keep components clean and contain fluids properly during disassembly and reassembly.
The document provides instructions for removing and installing various engine components on a Caterpillar 313D excavator. Specifically, it details procedures for removing and installing the flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear from the front gear group. The instructions include lists of required tools and step-by-step processes with illustrations for each procedure.
The document provides instructions for removing and installing various components of a Caterpillar C4.2 engine, including the flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear of the front gear group. The procedures include using various tools to remove bolts, nuts, seals, and other parts. Cleanliness is emphasized to prevent contamination.
The document provides instructions for removing and installing various engine components on a Caterpillar 313D excavator. Specifically, it details procedures for removing and installing the flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear from the front gear group. The instructions include lists of required tools and step-by-step processes with illustrations for each procedure.
New Holland W230C Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a W230C Wheel Loader. It is a service manual section that outlines 16 steps for engine removal, including draining fluids, disconnecting wiring harnesses and hoses, removing mounting bolts, and lifting the engine out after the hood is raised. The overall process described allows for marking components and connections for accurate reinstallation of the engine.
New Holland W230C Tier 4A (interim) Wheel Loader Service Repair Manual Instan...taishang3939
This service manual provides information on servicing the W190C/W230C Tier 4A wheel loader. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Safety precautions are provided throughout to prevent injury or damage when servicing the machine.
New Holland W230C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a wheel loader. It involves marking components for reinstallation, draining fluids like coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Removal requires proper safety procedures and draining of hydraulic systems before disconnecting hoses and electrical connections.
New Holland W190C Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and radiator installation is the reverse of removal. Refer to the engine service manual for any engine repairs.
New Holland W190C Tier 4A (interim) Wheel Loader Service Repair Manual Instan...taishang3939
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader, platform and safety features. The manual includes an introduction on safety procedures and product identification.
New Holland W190C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
- Drain engine oil and coolant from the machine. Disconnect batteries.
- Remove hood and lift it off with a nylon strap through the exhaust stack. Disconnect hood wiring.
- Disconnect engine wiring harness connectors and remove air intake and exhaust components.
- Remove drive belt, lower cooler hose, and air conditioning wiring (if equipped).
- The engine can now be lifted out after removing mounting brackets and bolts.
New Holland W170B Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine and radiator from a wheel loader. It is a multi-step process that begins with preparing the machine by parking it, lowering the bucket, engaging the articulation lock, discharging pressure from hydraulic and brake systems, and disconnecting the batteries. Hoses and wiring are then disconnected, including the air intake, crankcase ventilation, coolant vent, and wiring harness. Finally, the radiator is drained, engine oil is drained, and lifting straps are attached to remove the hood and engine.
New Holland W110C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a W110C Wheel Loader. Key steps include: parking the machine safely, discharging pressure from hydraulic and brake systems, disconnecting batteries, draining coolant and oil, removing lift cylinders, and using lifting straps to raise the hood and access the engine. A solid steel bar is then used through the lifting straps to support the hood while the engine is removed. Removal instructions are provided in 11 sequential steps.
New Holland W80BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides safety instructions and technical specifications for a repair manual. It outlines general safety precautions for working on equipment, including stopping the engine and relieving hydraulic pressure before removing parts. Emergency procedures and required safety equipment are also described. Technical details covered include the machine models and print numbers for the repair manual volumes.
New Holland W80 Compact Wheel Loader Parts Catalogue Manual Instant Download.pdftaishang3939
This document contains a section index and parts listings for various components of an agricultural machine. The section index lists parts categories including the frame, axles, wheels, prop shaft, tanks, ballast, motor/drivetrain parts, and more. Specific part numbers, descriptions, quantities and references to related part figures are provided for items such as the front frame with mounting parts, joint parts for the frame, and rear frame with mounting parts.
More Related Content
Similar to Caterpillar Cat D6R STD TRACK-TYPE TRACTOR (Prefix EMM) Service Repair Manual Instant Download (EMM00001 and up).pdf
The document provides instructions for removing, disassembling, and installing a compression brake on a Caterpillar D7R track-type tractor. It describes removing the valve mechanism cover, then removing the compression brake by lifting it out while holding the oil tube. It also details disassembling the compression brake by removing pistons, springs, seals and other components. The assembly process is described as well, including installing new seals and pistons before reinstalling the compression brake.
Caterpillar cat 313 d excavator (prefix wpk) service repair manual (wpk00001 ...fjjskejdmdn
The document provides instructions to remove the idler gear from the front gear group of a C4.2 engine. It describes:
1. Using a puller tool to remove the idler gear from the front housing.
2. Cleaning the component parts and ensuring they are free from contaminants before installation to prevent premature wear.
3. Reinstalling the idler gear by pressing it into place in the front housing using an installer tool.
This document provides instructions for removing and installing various components of a 3126B engine for a Caterpillar D5N track-type tractor, including the camshaft, camshaft gear, camshaft bearings, engine oil pan, and piston cooling jets. The procedures describe draining fluids, using required tools, cleaning and applying sealant to mating surfaces, and torquing bolts to specified values. Safety notices are provided to contain fluids and prevent contamination.
This document provides instructions for removing and installing various components of a 3126B engine for a Caterpillar D5N track-type tractor, including the camshaft, camshaft gear, camshaft bearings, engine oil pan, and piston cooling jets. The steps describe draining fluids, identifying and using required tools, and properly aligning parts during assembly to ensure correct timing and operation. Safety notices are included to handle fluids safely and prevent contamination.
This document provides instructions for removing and installing various components of a 3126B engine for a Caterpillar D5N track-type tractor, including the camshaft, camshaft gear, camshaft bearings, and engine oil pan. The procedures describe draining fluids, noting part orientations, using specialty tools, and ensuring proper timing when removing and installing parts like the camshaft. Safety precautions are provided regarding containing fluids and preventing contamination.
This document provides instructions for removing and installing various components of a 3126B engine for a Caterpillar D5N track-type tractor, including the camshaft, camshaft gear, camshaft bearings, engine oil pan, and piston cooling jets. The steps describe draining fluids, identifying and using required tools, and properly aligning parts during assembly to ensure correct timing and operation. Safety notices are included to handle fluids safely and prevent contamination.
This document provides instructions for removing and installing various components of a 3126B engine for a Caterpillar D5N track-type tractor, including the camshaft, camshaft gear, camshaft bearings, engine oil pan, and piston cooling jets. The procedures describe draining fluids, noting part orientations, cleaning surfaces, and tightening bolts to specified torques. Tools required are also listed for some components.
This document provides instructions for removing and installing various components of a 3126B engine for a Caterpillar D5N track-type tractor, including the camshaft, camshaft gear, camshaft bearings, engine oil pan, and piston cooling jets. The detailed procedures include what tools are required, preparation steps, illustrated instructions, and reinstallation steps for each component. Safety notices are provided to keep parts clean and contain fluids properly.
The document provides instructions for removing and installing various components of a Caterpillar C4.2 engine, including the flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear of the front gear group. The procedures include using various tools to remove bolts, nuts, seals, and other parts. Technicians are advised to keep components clean and contain fluids properly during disassembly and reassembly.
The document provides instructions for removing and installing various engine components on a Caterpillar 313D excavator. Specifically, it details procedures for removing and installing the flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear from the front gear group. The instructions include lists of required tools and step-by-step processes with illustrations for each procedure.
The document provides instructions for removing and installing various components of a Caterpillar C4.2 engine, including the flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear of the front gear group. The procedures include using various tools to remove bolts, nuts, seals, and other parts. Cleanliness is emphasized to prevent contamination.
The document provides instructions for removing and installing various engine components on a Caterpillar 313D excavator. Specifically, it details procedures for removing and installing the flywheel housing, crankshaft pulley, crankshaft front seal, and idler gear from the front gear group. The instructions include lists of required tools and step-by-step processes with illustrations for each procedure.
Similar to Caterpillar Cat D6R STD TRACK-TYPE TRACTOR (Prefix EMM) Service Repair Manual Instant Download (EMM00001 and up).pdf (12)
New Holland W230C Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a W230C Wheel Loader. It is a service manual section that outlines 16 steps for engine removal, including draining fluids, disconnecting wiring harnesses and hoses, removing mounting bolts, and lifting the engine out after the hood is raised. The overall process described allows for marking components and connections for accurate reinstallation of the engine.
New Holland W230C Tier 4A (interim) Wheel Loader Service Repair Manual Instan...taishang3939
This service manual provides information on servicing the W190C/W230C Tier 4A wheel loader. The manual covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Safety precautions are provided throughout to prevent injury or damage when servicing the machine.
New Holland W230C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a wheel loader. It involves marking components for reinstallation, draining fluids like coolant and oil, disconnecting batteries, and using lifting straps to remove the engine. Removal requires proper safety procedures and draining of hydraulic systems before disconnecting hoses and electrical connections.
New Holland W190C Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This section of the service manual provides instructions for removing and installing the engine and radiator on a W190C Wheel Loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounting brackets and hoses. Engine installation is the reverse of removal. Radiator removal involves draining coolant and removing mounting brackets, and radiator installation is the reverse of removal. Refer to the engine service manual for any engine repairs.
New Holland W190C Tier 4A (interim) Wheel Loader Service Repair Manual Instan...taishang3939
This service manual provides specifications and repair information for Tier 4A interim wheel loaders. It covers the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader, platform and safety features. The manual includes an introduction on safety procedures and product identification.
New Holland W190C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
- Drain engine oil and coolant from the machine. Disconnect batteries.
- Remove hood and lift it off with a nylon strap through the exhaust stack. Disconnect hood wiring.
- Disconnect engine wiring harness connectors and remove air intake and exhaust components.
- Remove drive belt, lower cooler hose, and air conditioning wiring (if equipped).
- The engine can now be lifted out after removing mounting brackets and bolts.
New Holland W170B Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine and radiator from a wheel loader. It is a multi-step process that begins with preparing the machine by parking it, lowering the bucket, engaging the articulation lock, discharging pressure from hydraulic and brake systems, and disconnecting the batteries. Hoses and wiring are then disconnected, including the air intake, crankcase ventilation, coolant vent, and wiring harness. Finally, the radiator is drained, engine oil is drained, and lifting straps are attached to remove the hood and engine.
New Holland W110C Tier 4 Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides instructions for removing the engine from a W110C Wheel Loader. Key steps include: parking the machine safely, discharging pressure from hydraulic and brake systems, disconnecting batteries, draining coolant and oil, removing lift cylinders, and using lifting straps to raise the hood and access the engine. A solid steel bar is then used through the lifting straps to support the hood while the engine is removed. Removal instructions are provided in 11 sequential steps.
New Holland W80BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This document provides safety instructions and technical specifications for a repair manual. It outlines general safety precautions for working on equipment, including stopping the engine and relieving hydraulic pressure before removing parts. Emergency procedures and required safety equipment are also described. Technical details covered include the machine models and print numbers for the repair manual volumes.
New Holland W80 Compact Wheel Loader Parts Catalogue Manual Instant Download.pdftaishang3939
This document contains a section index and parts listings for various components of an agricultural machine. The section index lists parts categories including the frame, axles, wheels, prop shaft, tanks, ballast, motor/drivetrain parts, and more. Specific part numbers, descriptions, quantities and references to related part figures are provided for items such as the front frame with mounting parts, joint parts for the frame, and rear frame with mounting parts.
New Holland W70BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It consists of two volumes, one covering the wheel loaders and one covering the engine. The manual contains information on repair procedures, necessary tools, and service standards. It is important for technicians to carefully read this manual to correctly repair the machines and contact the manufacturer with any questions. Safety is emphasized, advising technicians to never attempt repairs while equipment is in motion.
New Holland W60BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It consists of two volumes, one covering the wheel loaders and one covering the engine. The manual contains information on repair procedures, necessary tools, and service standards. It is important for technicians to carefully read this manual to correctly repair the machines and contact the manufacturer with any questions. Safety is emphasized, advising technicians to never attempt repairs while equipment is in motion.
New Holland W50BTC Wheel Loader Service Repair Manual Instant Download.pdftaishang3939
This repair manual provides technical information for engineers to service wheel loaders models W50BTC, W60BTC, W70BTC, and W80BTC. It contains instructions for repair procedures, necessary tools, and specifications. The complete manual consists of two volumes, one covering the wheel loaders and one covering the engine. It lists contact information for questions and identifies print numbers to reference the correct volumes. Safety instructions are provided to prevent accidents during maintenance.
New Holland VN2080 Grape Harvester Service Repair Manual Instant Download.pdftaishang3939
This document contains specifications for a self-propelled grape harvester model VN 2080, including two variants. It includes dimensions, weights, engine specifications, hydraulic and steering systems, braking capabilities, and allowable slopes for operation with or without a destemmer installed. Key details are the machine's 129 kW diesel engine, maximum transport speed of 25 km/h, operating speed of 14 km/h, and ability to operate on slopes up to 20% without a destemmer or 10-19% with a destemmer installed, depending on the vineyard row spacing.
New Holland VN260 Grape Harvester Service Repair Manual Instant Download.pdftaishang3939
This document is a service manual for grape harvesters models VN260 and VN240. It contains sections and chapters describing the hydraulic drive control unit, hydraulic diagram, operation of the hydraulic drive system including the pump, motors, distribution valves, and functions like boosting, steering, braking and road speed. The manual provides detailed technical specifications and diagrams of the hydraulic system components and their interactions to enable service and maintenance.
New Holland VN240 Grape Harvester Service Repair Manual Instant Download.pdftaishang3939
This document is a service manual for grape harvesters models VN260 and VN240. It contains sections and chapters describing the hydraulic drive control unit, hydraulic diagram, operation of the hydraulic drive system including the pump, motors, distribution valves, and functions like boosting, steering, braking and road speed operation. The manual provides detailed technical specifications and diagrams for maintenance and repair of the hydraulic and drive components.
New Holland TV6070 Tractor Service Repair Manual Instant Download.pdftaishang3939
This document provides a table of contents for a tractor repair manual. It lists sections covering general information, the fuel system, air induction system, exhaust system, cooling systems, engine testing, transmissions, drivelines, hydrostatic drive components, auxiliary pump drive, splitter box removal and disassembly, engine end axle, cab end axle, cab end PTO, engine end PTO, brakes, and hydraulics and steering. Each section provides specifications, descriptions, troubleshooting, testing procedures, and instructions for removal and repair of components.
New Holland TN75 Tractor Service Repair Manual Instant Download.pdftaishang3939
1. The document provides safety instructions for maintenance and repair work on New Holland tractors. It stresses that all work must be done by trained technicians and strictly following the instructions to prevent injury.
2. It describes procedures for working with batteries, installing seals and bearings, and using tools, spare parts, and safety equipment properly.
3. The document emphasizes accident prevention and lists general safety guidelines such as wearing protective equipment, stopping the engine before removing covers, and taking precautions with fuels, electricity, lifting, and ventilation. Proper procedure is critical for safety.
New Holland TN70 Tractor Service Repair Manual Instant Download.pdftaishang3939
1. The document provides safety instructions for maintenance and repair work on New Holland tractors. It stresses that all work must be done by trained technicians and strictly following the instructions to prevent injury.
2. It describes procedures for working with batteries, installing seals and bearings, and using tools, spare parts, and safety equipment properly.
3. The document emphasizes accident prevention and lists general safety guidelines such as wearing protective equipment, stopping the engine before removing covers, and taking precautions with fuels, electricity, lifting, and ventilation. Proper procedure is critical for safety.
New Holland TN65 Tractor Service Repair Manual Instant Download.pdftaishang3939
The document provides instructions and safety guidelines for maintenance and repair work on New Holland tractors. It details important notices regarding authorized technicians only performing repairs, disconnecting the battery before work, and properly installing seals and bearings. Safety precautions are outlined such as wearing protective equipment, not smoking near fuels, and using lifting devices for heavy parts. Recommended lubricants and their specifications are also listed.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Caterpillar Cat D6R STD TRACK-TYPE TRACTOR (Prefix EMM) Service Repair Manual Instant Download (EMM00001 and up).pdf
1. Product: TRACK-TYPE TRACTOR
Model: D6R STD TRACK-TYPE TRACTOR EMM
Configuration: D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
C9 Engines for Caterpillar Built Machines
Media Number -RENR9579-20 Publication Date -01/02/2015 Date Updated -15/08/2018
i02580032
Valve Mechanism Cover - Remove and Install
SMCS - 1107-010
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01152102
1/3
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
2. 1. Remove bolts (1) .
2. Remove valve mechanism cover (2) and seal (3) .
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 4C-9612 Silicone Sealant 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01152102
2/3
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 3 g01138382
1. Position seal (3) in valve mechanism cover (2) . Apply Tooling (A) to both sides of the seal
joint. Position valve mechanism cover (2) and seal (3) on the valve cover base.
2. Install bolts (1) . Tighten bolts (1) in a numerical sequence to a torque of 20 ± 3 N·m (15 ±
2 lb ft).
3/3
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Product: TRACK-TYPE TRACTOR
Model: D6R STD TRACK-TYPE TRACTOR EMM
Configuration: D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
C9 Engines for Caterpillar Built Machines
Media Number -RENR9579-20 Publication Date -01/02/2015 Date Updated -15/08/2018
i02409213
Valve Mechanism Cover Base - Remove and Install
SMCS - 1120-010
Removal Procedure
Start By:
a. Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve
Mechanism Cover - Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 1 g01140735
1. Disconnect sensor (4) and harness assembly (6) from valve cover base (5).
2. Remove bolt (1) and the clip that holds the harness assembly.
3. Disconnect harness assemblies (3).
4. Remove bolts (2), the washers, and the springs.
5. Remove valve cover base (5) and the seal.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/4
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 2 g01140735
Illustration 3 g01061297
1. Position the seal and valve cover base (5) on the cylinder head.
2. Install the springs, the washers, and bolts (2). Tighten bolts (2) in a numerical sequence.
3/4
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 3. Connect harness assemblies (3).
4. Install the clip and bolt (1) that holds the harness assembly.
5. Connect harness assembly (6) to valve cover base (5). Tighten the bolts to a torque of
6 ± 1 N·m (53 ± 9 lb in).
6. Connect sensor (4) to valve cover base (5).
End By:
a. Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism
Cover - Remove and Install".
4/4
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Product: TRACK-TYPE TRACTOR
Model: D6R STD TRACK-TYPE TRACTOR EMM
Configuration: D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
C9 Engines for Caterpillar Built Machines
Media Number -RENR9579-20 Publication Date -01/02/2015 Date Updated -15/08/2018
i02884496
Rocker Arm and Shaft - Remove
SMCS - 1102-011
Removal Procedure
Start By:
a. Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve
Mechanism Cover - Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Place identification marks on each of the rocker arms in order to identify the proper location
for installation.
1/2
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 1 g00953116
2. Loosen nuts (3) and rocker arm adjustment screws (2).
3. Remove bolts (1) and rocker shaft (4).
4. Remove the pushrods and the valve bridges.
2/2
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Product: TRACK-TYPE TRACTOR
Model: D6R STD TRACK-TYPE TRACTOR EMM
Configuration: D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
C9 Engines for Caterpillar Built Machines
Media Number -RENR9579-20 Publication Date -01/02/2015 Date Updated -15/08/2018
i02544763
Rocker Arm - Disassemble
SMCS - 1123-015
Disassembly Procedure
Start By:
a. Remove the rocker arm and shaft. Refer to Disassembly and Assembly, "Rocker Arm and
Shaft - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Place an identification mark on each of the components of the rocker shaft for installation
purposes.
1/2
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 1 g01160012
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Remove plug (2) from rocker shaft (1).
2. Remove stand (6), inlet rocker arm (5), spring (4), and exhaust rocker arm (3) from rocker
shaft (1).
2/2
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Product: TRACK-TYPE TRACTOR
Model: D6R STD TRACK-TYPE TRACTOR EMM
Configuration: D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
C9 Engines for Caterpillar Built Machines
Media Number -RENR9579-20 Publication Date -01/02/2015 Date Updated -15/08/2018
i02544772
Rocker Arm - Assemble
SMCS - 1123-016
Assembly Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Lubricate all components of the rocker arm shaft with clean engine oil.
1/3
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 1 g01160012
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
2. Install exhaust rocker arm (3), spring (4), inlet rocker arm (5), and stand (6) on rocker shaft
(1).
3. Install plug (2) into rocker shaft (1).
End By:
a. Install the rocker arm and shaft. Refer to Disassembly and Assembly, "Rocker Arm and
Shaft - Install".
2/3
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Product: TRACK-TYPE TRACTOR
Model: D6R STD TRACK-TYPE TRACTOR EMM
Configuration: D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
C9 Engines for Caterpillar Built Machines
Media Number -RENR9579-20 Publication Date -01/02/2015 Date Updated -15/08/2018
i04506590
Rocker Arm and Shaft - Install
SMCS - 1102-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-2998 Lubricant -
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Apply Tooling (A) to both ends of the pushrods.
2. Lubricate the pushrods with clean engine oil. Install the pushrods and the valve bridges.
1/3
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 1 g00953116
3. Position rocker shaft (4) on the cylinder head. Install bolts (1).
Illustration 2 g02685496
Rocker shaft hold down bolts tightening sequence
4. Tighten bolts (1) in the sequence shown. Tighten bolts (1) to standard torque.
2/3
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 5. Apply Tooling (A) to each of the bottom faces of the rocker arms.
6. Position rocker arm adjustment screws (2) and tighten nuts (3). Adjust the valve lash of the
rocker arms. Refer to Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust".
End By:
a. Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism
Cover - Remove and Install".
3/3
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Product: TRACK-TYPE TRACTOR
Model: D6R STD TRACK-TYPE TRACTOR EMM
Configuration: D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
C9 Engines for Caterpillar Built Machines
Media Number -RENR9579-20 Publication Date -01/02/2015 Date Updated -15/08/2018
i02308888
Cylinder Head - Remove
SMCS - 1100-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 1
Start By:
a. Remove the rocker arm and shaft. Refer to Disassembly and Assembly, "Rocker Arm and
Shaft - Remove".
b. Remove the valve mechanism cover base. Refer to Disassembly and Assembly, "Valve
Mechanism Cover Base - Remove and Install".
c. Remove the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
1/4
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Dispose of all fluids according to local regulations and mandates.
1. Drain the coolant from the cooling system into a suitable container for storage or for
disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) -
Change".
Illustration 1 g01156402
2. Remove bolts (1) and remove support assembly (2). Disconnect cable assembly (3).
Disconnect tube assembly (4).
2/4
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 3 g01156425
Note: Use caution in order not to damage the tips of the injectors.
7. Attach Tooling (A) and a suitable lifting device onto cylinder head (11). The weight of
cylinder head (11) is approximately 181 kg (400 lb). Remove cylinder head (11) and the
gasket.
4/4
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Product: TRACK-TYPE TRACTOR
Model: D6R STD TRACK-TYPE TRACTOR EMM
Configuration: D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
C9 Engines for Caterpillar Built Machines
Media Number -RENR9579-20 Publication Date -01/02/2015 Date Updated -15/08/2018
i05351278
Cylinder Head - Install
SMCS - 1100-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/5
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 1 g03389635
Illustration 2 g01156425
1. Place O-ring seal on engine block before installing the gasket. Position the gasket on the
engine block. Attach Tooling (A) and a suitable lifting device onto cylinder head (11). The
weight of cylinder head (11) is approximately 181 kg (400 lb). Position cylinder head (11)
on the engine.
2.
2/5
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Suggest:
For more complete manuals. Please go to
the home page.
https://www.ebooklibonline.com
If the above button click is invalid. Please
download this document first, and then
click the above link to download the
complete manual.
Thank you so much for reading
24. Illustration 3 g01156406
Illustration 4 g02963318
3. Apply clean engine oil to the threads of bolts (10) and under the bolt heads. Install bolts
(10).
3/5
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. 4. Torque the bolt (1) through bolt (26) in a numerical sequence to 130 ± 15 N·m
(95 ± 11 lb ft).
5. Again torque the bolt (1) through bolt (26) in a numerical sequence to 130 ± 15 N·m
(95 ± 11 lb ft).
6. Place a mark on bolt (1) through bolt (26). Rotate the bolt (1) through bolt (26) in the
clockwise direction in a numerical sequence to 90 degrees (1/4 turn).
7. Loosen the bolt (1) through bolt (26) in a numerical sequence to 0 N·m (0 lb ft).
8. Repeat Step 3 through Step 6.
9. Torque the bolt (27) through bolt (31) in a numerical sequence to 28 ± 7 N·m (21 ± 5 lb ft).
10. Connect hose assembly (9).
11. Connect tube assembly (8) onto the turbocharger.
12. Connect harness assemblies (5), (6), and (7).
Illustration 5 g01156402
13. Connect tube assembly (4). Connect cable assembly (3). Position support assembly (2) and
install bolts (1).
4/5
D6R TRACK-TYPE TRACTOR STD, XL EMM00001-UP (MACHINE) POWERED ...
2021/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...