This document provides instructions for removing and installing the cylinder head on a Caterpillar 3412E engine. It lists the required tools and gives step-by-step details of the removal and installation process. The removal process involves detaching hoses, bolts, and manifolds. Lifting devices are needed due to the heavy weight of parts. The installation process reverses the removal steps and provides tightening specifications for bolts. Precautions are given to keep parts clean and apply lubricants to seals.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
2. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 992D WHEEL LOADER 7MJ
Configuration: 992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine
Disassembly and Assembly
3408E and 3412E Engines for Caterpillar Built Machines
Media Number -SENR1013-11 Publication Date -01/07/2015 Date Updated -22/08/2016
i02184090
Cylinder Head - Remove
SMCS - 1100-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B 5P-8700 Lifting Bracket 2
Start By:
a. Remove the unit injector sleeves. Refer to Disassembly and Assembly, "Unit Injector Sleeve
- Remove".
b. Remove the exhaust manifold. Refer to Disassembly and Assembly, "Exhaust Manifold -
Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
1/5
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00570914
1. Remove hose assembly (1) from the front of the fuel manifold.
Illustration 2 g00570923
2. Remove hose assembly (2) from the rear of the fuel manifold.
2/5
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 3 g00582732
3. Remove tube assembly (3).
Illustration 4 g00570979
4. Remove cylinder head bolts (5). Remove bolts (4).
Illustration 5 g00570983
5. Attach Tooling (A) and a suitable lifting device to fuel manifold (6). The weight of the fuel
manifold for the 3412E is approximately 60 kg (131 lb). The weight of the fuel manifold for
the 3408E is approximately 39 kg (86 lb). Remove bolts (7). Remove fuel manifold (6).
3/5
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. vO
Illustration 6 g01105094
6. Attach Tooling (B) and a suitable lifting device to the cylinder head. The weight of the
cylinder head for the 3412E is approximately 172 kg (380 lb). The weight of the cylinder
head for the 3408E is approximately 90 kg (200 lb). Remove cylinder head nuts (8).
Illustration 7 g01105075
7. Remove cylinder head (9) and the gasket.
Illustration 8 g01105076
4/5
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 8. Remove seals (10).
9. Remove spacer plate (11).
Illustration 9 g01105072
10. Remove O-ring seals (12) and gasket (13).
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jun 21 00:27:38 UTC+0800 2021
5/5
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 992D WHEEL LOADER 7MJ
Configuration: 992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine
Disassembly and Assembly
3408E and 3412E Engines for Caterpillar Built Machines
Media Number -SENR1013-11 Publication Date -01/07/2015 Date Updated -22/08/2016
i02184092
Cylinder Head - Install
SMCS - 1100-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B 5P-8700 Lifting Bracket 2
C 8C-8422 Sealant 2
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Thoroughly clean the spacer plate and the bottom surface of the cylinder head. A new
spacer plate gasket must be installed when the cylinder head is removed.
Note: Apply a thin film of clean engine oil on the seals and the O-ring seals prior to installation.
1/7
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 1 g01105072
1. Install O-ring seals (12) and gasket (13).
Illustration 2 g01105076
2. Install spacer plate (11).
3. Install seals (10).
Illustration 3 g01105075
4. Position the gasket on the engine. Attach Tooling (B) and a suitable lifting device to the
cylinder head. The weight of the cylinder head for the 3412E is approximately 172 kg
2/7
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. (380 lb). The weight of the cylinder head for the 3408E is approximately 90 kg (200 lb).
Install cylinder head (9).
Illustration 4 g01105094
5. Install cylinder head nuts (8). Remove Tooling (B).
Illustration 5 g00570607
3/7
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 6 g00582780
6. Apply Tooling (C) to the shaded area of the fuel manifold. Tooling (C) is applied to the
bottom portion of the fuel manifold. Tooling (C) is permitted on the entire face of the fuel
manifold.
Illustration 7 g00570983
7. Attach Tooling (A) and a suitable lifting device to fuel manifold (6). The weight of the fuel
manifold for the 3412E is approximately 60 kg (131 lb). The weight of the fuel manifold for
the 3408E is approximately 39 kg (86 lb). Install fuel manifold (6). Install bolts (7).
4/7
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 10 g00582808
Note: Apply clean engine oil to the bolts for the cylinder head.
8. Install cylinder head bolts (5). Install bolts (4).
9. Tighten the bolts in the following sequence:
In a numerical sequence, tighten the bolts 1 through 26 for the 3412E.
In a numerical sequence, tighten the bolts 1 through 18 for the 3408E.
a. In a numerical sequence, tighten the bolts to a torque of 270 ± 15 N·m
(200 ± 11 lb ft).
b. In a numerical sequence, tighten the bolts to a torque of 450 ± 15 N·m
(330 ± 11 lb ft).
c. In a numerical sequence, again tighten the bolts to a torque of 450 ± 15 N·m
(330 ± 11 lb ft).
d. Tighten the upper row of nuts that are on the cylinder head in the following sequence:
In a numerical sequence, tighten nuts 27 through 39 for the 3412E to a torque of
45 ± 7 N·m (33 ± 5 lb ft).
In a numerical sequence, tighten nuts 19 through 27 for the 3408E to a torque of
45 ± 7 N·m (33 ± 5 lb ft).
Illustration 11 g00582732
10. Install tube assembly (3).
6/7
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 12 g00570923
11. Install hose assembly (2) on the rear of the fuel manifold.
Illustration 13 g00570914
12. Install hose assembly (1) on the front of the fuel manifold.
End By:
a. Install the exhaust manifold. Refer to Disassembly and Assembly, "Exhaust Manifold -
Remove and Install".
b. Install the unit injector sleeves. Refer to Disassembly and Assembly, "Unit Injector Sleeve -
Install".
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jun 21 00:28:34 UTC+0800 2021
7/7
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 992D WHEEL LOADER 7MJ
Configuration: 992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine
Disassembly and Assembly
3408E and 3412E Engines for Caterpillar Built Machines
Media Number -SENR1013-11 Publication Date -01/07/2015 Date Updated -22/08/2016
i05933135
Lifter Group - Remove and Install
SMCS - 1209-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-7433 Valve Lifter Tool Group 1
Start By:
A. Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head -
Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 1 g00571490
Illustration 2 g00571491
1. Install Tooling (A) in lifter assembly (1) .
2. Remove lifter assembly (1) from the lifter bore.
Illustration 3 g00571492
3. Remove lifter guide spring (2) from the lifter assembly.
2/4
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 5P-7433 Valve Lifter Tool Group 1
Note: Install new valve lifter guide springs on the valve lifter when the valve lifters are
removed from the engine.
Note: Apply clean engine oil to the ball socket for the pushrod and the bore for the valve
lifter assembly.
Illustration 4 g00571513
1. Make an alignment of the new lifter guide spring (2) in Tooling (A) .
Illustration 5 g01104989
2. Install lifter assembly (1) in the cylinder block with Tooling (A) .
3/4
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. End By: Install the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Install".
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jun 21 00:29:31 UTC+0800 2021
4/4
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 992D WHEEL LOADER 7MJ
Configuration: 992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine
Disassembly and Assembly
3408E and 3412E Engines for Caterpillar Built Machines
Media Number -SENR1013-11 Publication Date -01/07/2015 Date Updated -22/08/2016
i06177964
Camshaft - Remove and Install
SMCS - 1210-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
Start By:
a. Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) -
Remove".
b. Remove the lifter group. Refer to Disassembly and Assembly, "Lifter Group - Remove and
Install".
c. Remove the flywheel housing. Refer to Disassembly and Assembly, " Flywheel Housing -
Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
1/6
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00572086
1. Remove four bolts (1) and plate (2) from the rear of the camshaft. Remove gear (3) from the
camshaft.
Illustration 2 g00572090
2. Rotate the engine until the “V” marks on the front of the timing gears are in alignment.
2/6
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 3 g00572095
3. Remove two bolts (5) and plate (4) from the camshaft.
Illustration 4 g00572105
4. Remove camshaft (6) from the cylinder block.
Illustration 5 g00572214
5. If necessary, remove camshaft gear (7) with Tool (A) and press.
Installation Procedure
3/6
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 6 g00572220
Note: The key for gear (7) must be in position on the camshaft (6) before gear (7) is
installed.
1. Do not use a torch to heat camshaft gear (7). Raise the temperature of camshaft gear (7) by
one of the following methods.
◦ Use a suitable oven to raise the temperature of camshaft gear (7). Do not exceed
150° C (302° F) for more than four hours.
◦ Use a suitable induction heater to raise the temperature of the hub of camshaft gear
(7). Do not exceed 150° C (302° F) at bottom of gear teeth root radius.
2. Install camshaft gear (7) to camshaft (6).
3. Put 8T-2998 Lubricant on the camshaft lobes and the rollers for the valve lifter. Put clean
engine oil on the bearing journals of the camshaft.
4/6
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 7 g00572105
4. Install camshaft (6) until the rear of the camshaft is even with the rear of the cylinder block.
Illustration 8 g00572090
5. Make an alignment of the “V” marks on the camshaft gear and the idler gear.
Illustration 9 g00572221
6. Install plate (4) on the cylinder block.
Illustration 10 g00572086
5/6
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. 7. Install gear (3) and plate (2) on the rear of the camshaft.
End By:
a. Install the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing -
Remove and Install".
b. Install the lifter group. Refer to Disassembly and Assembly, "Lifter Group - Remove and
Install".
c. Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install".
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jun 21 00:30:28 UTC+0800 2021
6/6
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 992D WHEEL LOADER 7MJ
Configuration: 992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine
Disassembly and Assembly
3408E and 3412E Engines for Caterpillar Built Machines
Media Number -SENR1013-11 Publication Date -01/07/2015 Date Updated -22/08/2016
i01519738
Camshaft Bearings - Remove and Install
SMCS - 1211-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
8S-2241 Camshaft Bearing Tool Group 1
8S-8293 Extension 1
5P-1667 Tube 1
Start By:
A. Remove the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing -
Remove and Install".
B. Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and
Install".
C. Remove the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and
Connecting Rods - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/5
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00569925
1. Remove the rear camshaft bearing with Tool (A) .
2. Remove the remainder of the camshaft bearings with Tool (A) through the rear of the
engine block. Start from the rear of the cylinder block and move toward the front.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A
8S-2241 Camshaft Bearing Tool Group 1
8S-8293 Extension 1
5P-1667 Tube 1
2/5
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Ensure that the inside of the cylinder block is clean. Inspect the camshaft bore for
metal burrs. Put a thin film of clean engine oil on the inside of the camshaft bearing bores
and on each camshaft bearing prior to installation.
Note: Two different camshaft bearings are used. Install the wider camshaft bearings in the
front and rear camshaft bores. Install the narrow camshaft bearings in the inner bores.
Illustration 2 g00570127
1. Install all the camshaft bearings with Tool (A) so that the oil hole in the camshaft bearing is
in a horizontal position. Installation angle (1) is 90 ± 15°.
2. Install the camshaft bearings with Tool (A) on the front side of the engine. Start the bearing
that is being installed from the rear of each bore. Pull the bearing into the bore with Tool
(A). Use the following procedure for achieving the proper installation depth for the
bearings.
3/5
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 3 g00583232
a. Install the rear camshaft bearing. Pull the bearing into the bore until the front face of
the bearing is flush with the front face of bore (2).
b. Install the narrow internal camshaft bearings. Start at the rear of the engine and work
forward. Pull each bearing into the bore until the front face of the bearing is flush
with the front face of the bore.
Illustration 4 g00569930
Measure the depth of the front camshaft bearing.
c. Install the front camshaft bearing with Tool (A) until the bearing is at the specified
depth. the depth is measured from the front of the engine block.
The front camshaft bearing for the 3412E should be 7.4 ± 0.5 mm (0.29 ± 0.02 inch)
from the front face of the engine block.
The front camshaft bearing for the 3408E should be 4.6 ± 0.5 mm (0.18 ± 0.02 inch)
from the front face of the engine block.
Note: Refer to Specifications, "Camshaft Bearings" for more information about camshaft
bearings.
4/5
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. End By:
a. Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
b. Install the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing -
Remove and Install".
c. Install the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and
Connecting Rods - Install".
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jun 21 00:31:24 UTC+0800 2021
5/5
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 992D WHEEL LOADER 7MJ
Configuration: 992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine
Disassembly and Assembly
3408E and 3412E Engines for Caterpillar Built Machines
Media Number -SENR1013-11 Publication Date -01/07/2015 Date Updated -22/08/2016
i01057286
Engine Oil Pan - Remove and Install
SMCS - 1302-010
Removal Procedure
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
30. Hot oil and hot components can cause personal injury. Do not allow hot
oil or hot components to contact the skin.
1. Drain the oil from the engine oil pan into a suitable container for storage or disposal.
Illustration 1 g00552331
Typical example
2. Remove tube assembly (1). Remove the gaskets.
Illustration 2 g00552333
Typical example
3. Remove bolts (2) from engine oil pan (3).
4. Use two technicians in order to remove engine oil pan (3).
The weight of the engine oil pan for the 3408E is approximately 14 kg (31 lb).
The weight of the engine oil pan for the 3412E is approximately 27 kg (60 lb).
5. Thoroughly remove gasket (4) from the engine oil pan and the cylinder block.
2/4
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
31. Make sure that all of the old gasket material has been removed from the mating surfaces of
the engine oil pan and the cylinder block. Make sure that all surfaces are clean and free of
dirt and debris.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Use 5H-2471 Adhesive to install a new gasket on the engine oil pan.
Illustration 3 g00552333
Typical example
2. Put new gasket (4) into position on engine oil pan (3).
3. Use two technicians in order to put engine oil pan (4) in position on the engine.
The weight of the engine oil pan for the 3408E is approximately 14 kg (31 lb).
The weight of the engine oil pan for the 3412E is approximately 27 kg (60 lb).
4. Install bolts (2) that hold engine oil pan (3) to the cylinder block.
3/4
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
32. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
33. Illustration 4 g00552331
Typical example
5. Install tube assembly (1).
6. Fill the engine to the correct level with the recommended oil. Refer to the Operation and
Maintenance Manual.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jun 21 00:32:21 UTC+0800 2021
4/4
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
34. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 992D WHEEL LOADER 7MJ
Configuration: 992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine
Disassembly and Assembly
3408E and 3412E Engines for Caterpillar Built Machines
Media Number -SENR1013-11 Publication Date -01/07/2015 Date Updated -22/08/2016
i05661411
Cylinder Liner - Remove
SMCS - 1216-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
5P-8665 Cylinder Liner Puller Gp 1
6V-9448(1)
Cylinder Pack Puller Gp 1
373-1438(2)
Cylinder Pack Puller Gp 1
(1)
Alternative option to remove liner, piston, and connecting rod as an assembly for 137 mm (5.4 inch) and 140 mm
(5.5 inch) bore diameters.
(2)
Alternative option to remove liner, piston, and connecting rod as an assembly for 145 mm (5.7 inch) bore
diameter.
Start By:
a. Remove the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and
Connecting Rods - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/2
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
35. Illustration 1 g01005579
1. Remove cylinder liner (1) with Tooling (A).
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jun 21 00:33:18 UTC+0800 2021
2/2
992D Wheel Loader 7MJ00001-UP (MACHINE) POWERED BY 3412 Engine(SEBP...
2021/6/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...