1. The document provides instructions for disassembling and assembling various components of a 966K wheel loader, including the piston pump for steering, secondary steering pump and electric motor, secondary steering valve, and gear pump for secondary steering.
2. The procedures include removing and installing parts in a specified order, with illustrations showing each step. Safety precautions are provided for parts under spring tension.
3. Tools and torque specifications are listed for properly assembling components like bolts, plugs, and sensor assemblies. End play is checked using a dial indicator to set the correct shim.
1. The document provides instructions for assembling the piston pump steering system on a 966K wheel loader. It lists the required tools and presents the assembly steps through illustrations and descriptions.
2. The assembly procedure involves installing bearings, seals, pistons, springs, and other components in the correct order. Proper assembly of spring-loaded parts is emphasized for safety.
3. Upon completion, a dial indicator check is specified to ensure the axial shaft end play is within the correct specification of 0.01 to 0.10 mm, and shims can be used if needed. The steering pump is then reinstalled to complete the job.
1. The document provides instructions for assembling the piston pump steering system on a 966K wheel loader. It lists the required tools and presents step-by-step procedures for installing various components like bearings, seals, pistons, and covers.
2. Additional sections provide instructions for removing and installing the secondary steering pump and electric motor. Components are disconnected and mounting bolts are removed to separate the pump and motor.
3. One section gives a brief procedure for removing the secondary steering valve by disconnecting hoses and harnesses and removing mounting bolts.
1. The document provides instructions for assembling the piston pump steering system on a 966K wheel loader. It lists the required tools and presents the assembly steps through illustrations and descriptions.
2. The assembly procedure involves installing bearings, seals, pistons, springs, and other components in the correct order. Proper assembly of spring-loaded parts is emphasized for safety.
3. Upon completion, a dial indicator check is specified to ensure the axial shaft end play is within the correct specification of 0.01 to 0.10 mm, and shims are used if needed. The steering pump is then reinstalled to complete the job.
This document provides instructions for disassembling and assembling the piston pump of the steering system on a 962K Wheel Loader. The disassembly procedure outlines 28 steps to dismantle the individual components of the pump. The assembly procedure describes 34 steps and cautions to properly reassemble the pump components and ensure correct axial shaft end play. Tools required include a driver and retaining ring pliers. Proper spring compression and release is emphasized to safely work on components under tension.
This document provides instructions for disassembling and assembling the piston pump of the steering system on a 962K wheel loader. It lists the required tools and presents 28 steps for disassembly and 27 steps for assembly, with illustrations showing how to remove and install each component. Key steps include using retaining ring pliers to remove springs and pistons from the barrel assembly, and taking care with compressed springs during assembly.
This document provides instructions for disassembling and assembling the piston pump of the steering system on a 962K wheel loader. It lists the required tools and presents 28 steps for disassembly and 27 steps for assembly, with illustrations showing how to remove and install each component. Key steps include using retaining ring pliers to remove springs and pistons from the barrel assembly, and taking care when compressing springs during assembly to prevent injury.
This document provides instructions for disassembling and assembling the piston pump of the steering system on a Caterpillar 962K wheel loader. The disassembly procedure involves removing 28 individual parts in a specific sequence, taking care with springs. The assembly procedure reverses this, installing the parts in the opposite sequence and ensuring O-rings and seals are properly placed. Tools including drivers and retaining ring pliers are required.
This document provides instructions for disassembling and assembling the piston pump of the steering system on a Caterpillar 962K wheel loader. The disassembly procedure involves removing 28 individual parts in a specific sequence, taking care with springs. The assembly procedure reverses this, installing the parts in the opposite sequence and ensuring O-rings and seals are properly placed. Tools including drivers and retaining ring pliers are required. Proper techniques and safety precautions are noted to avoid injury from released spring forces.
1. The document provides instructions for assembling the piston pump steering system on a 966K wheel loader. It lists the required tools and presents the assembly steps through illustrations and descriptions.
2. The assembly procedure involves installing bearings, seals, pistons, springs, and other components in the correct order. Proper assembly of spring-loaded parts is emphasized for safety.
3. Upon completion, a dial indicator check is specified to ensure the axial shaft end play is within the correct specification of 0.01 to 0.10 mm, and shims can be used if needed. The steering pump is then reinstalled to complete the job.
1. The document provides instructions for assembling the piston pump steering system on a 966K wheel loader. It lists the required tools and presents step-by-step procedures for installing various components like bearings, seals, pistons, and covers.
2. Additional sections provide instructions for removing and installing the secondary steering pump and electric motor. Components are disconnected and mounting bolts are removed to separate the pump and motor.
3. One section gives a brief procedure for removing the secondary steering valve by disconnecting hoses and harnesses and removing mounting bolts.
1. The document provides instructions for assembling the piston pump steering system on a 966K wheel loader. It lists the required tools and presents the assembly steps through illustrations and descriptions.
2. The assembly procedure involves installing bearings, seals, pistons, springs, and other components in the correct order. Proper assembly of spring-loaded parts is emphasized for safety.
3. Upon completion, a dial indicator check is specified to ensure the axial shaft end play is within the correct specification of 0.01 to 0.10 mm, and shims are used if needed. The steering pump is then reinstalled to complete the job.
This document provides instructions for disassembling and assembling the piston pump of the steering system on a 962K Wheel Loader. The disassembly procedure outlines 28 steps to dismantle the individual components of the pump. The assembly procedure describes 34 steps and cautions to properly reassemble the pump components and ensure correct axial shaft end play. Tools required include a driver and retaining ring pliers. Proper spring compression and release is emphasized to safely work on components under tension.
This document provides instructions for disassembling and assembling the piston pump of the steering system on a 962K wheel loader. It lists the required tools and presents 28 steps for disassembly and 27 steps for assembly, with illustrations showing how to remove and install each component. Key steps include using retaining ring pliers to remove springs and pistons from the barrel assembly, and taking care with compressed springs during assembly.
This document provides instructions for disassembling and assembling the piston pump of the steering system on a 962K wheel loader. It lists the required tools and presents 28 steps for disassembly and 27 steps for assembly, with illustrations showing how to remove and install each component. Key steps include using retaining ring pliers to remove springs and pistons from the barrel assembly, and taking care when compressing springs during assembly to prevent injury.
This document provides instructions for disassembling and assembling the piston pump of the steering system on a Caterpillar 962K wheel loader. The disassembly procedure involves removing 28 individual parts in a specific sequence, taking care with springs. The assembly procedure reverses this, installing the parts in the opposite sequence and ensuring O-rings and seals are properly placed. Tools including drivers and retaining ring pliers are required.
This document provides instructions for disassembling and assembling the piston pump of the steering system on a Caterpillar 962K wheel loader. The disassembly procedure involves removing 28 individual parts in a specific sequence, taking care with springs. The assembly procedure reverses this, installing the parts in the opposite sequence and ensuring O-rings and seals are properly placed. Tools including drivers and retaining ring pliers are required. Proper techniques and safety precautions are noted to avoid injury from released spring forces.
The document provides instructions for removing and installing a secondary steering pump and electric motor on a Caterpillar 962K wheel loader. It outlines 28 steps for disassembly of the steering pump that include removing bolts, valves, seals, spools, plugs, springs, and other components. The assembly section lists 34 steps for reinstalling components in reverse order and adjusting axial shaft end play.
The document provides instructions for disassembling and assembling the piston pump used in the steering system of a Caterpillar 950H wheel loader. It lists the required tools and presents the steps to disassemble the various components of the pump in 27 steps. These include removing springs, spools, pistons, bearings, and other parts. The assembly section then lists 34 steps to reassemble the pump components in the reverse order, noting precautions for parts under spring tension. A final check of axial shaft end play is specified to ensure proper assembly.
The document provides instructions for disassembling and assembling the piston pump used for steering in a Caterpillar 950H wheel loader. It details 27 steps for disassembly, including removing bolts, valves, springs, and other internal components. 34 steps are outlined for reassembly, requiring the proper tools and following precautions to prevent injury from parts under spring tension. A final step specifies checking axial shaft end play and installing correct shims to achieve the specified range of 0.01 to 0.10 mm.
This document provides disassembly and assembly instructions for the piston pump of a 950H wheel loader. The disassembly instructions list 28 steps to fully disassemble the pump, removing components like valves, plugs, springs, and bearings. The assembly section then lists 29 steps to reassemble the pump, providing the reverse of the disassembly instructions and noting any specific tools or precautions needed.
1. The document provides step-by-step instructions for disassembling and assembling the piston pump of a 962H wheel loader steering system.
2. It details 27 steps for disassembly, including removing bolts, valves, plugs, springs, and other internal components of the pump.
3. For assembly, it lists 34 steps reversing the disassembly process and provides torque specifications for tightening bolts. Safety precautions are noted for parts under spring tension.
1. The document provides step-by-step instructions for disassembling and assembling the piston pump of a 962H wheel loader steering system.
2. It details 27 steps for disassembly, including removing bolts, valves, plugs, springs, and other internal components of the pump.
3. The assembly section outlines 34 steps for reassembling the pump components in reverse order and includes precautions for working with spring-loaded parts.
1. The document provides step-by-step instructions for disassembling and assembling the piston pump of a 962H wheel loader steering system.
2. It details 27 steps for disassembly, including removing bolts, valves, plugs, springs, and other internal components of the pump.
3. The assembly section outlines 34 steps for reassembling the pump components in reverse order and includes precautions for working with spring-loaded parts.
This document provides instructions for disassembling and assembling a piston pump used in a Caterpillar 962H wheel loader. The disassembly procedure involves 28 steps to remove components like valves, plugs, spools, springs, and pistons. The assembly procedure reverses the disassembly steps and includes precautions for working with spring-loaded parts.
1. The document provides step-by-step instructions for disassembling and assembling the piston pump of a 962H wheel loader steering system.
2. It details 27 steps for disassembly, including removing bolts, valves, plugs, springs, and other internal components of the pump.
3. The assembly section outlines 34 steps for reassembling the pump components in reverse order and includes precautions for working with spring-loaded parts.
This document provides instructions for disassembling and assembling the piston pump of a 950H wheel loader. The disassembly procedure involves removing 28 individual parts in a specific sequence, taking care with spring-loaded components. The assembly procedure reverses this, installing the 28 parts in the opposite sequence and also warns of risks from spring-loaded parts. Proper tools are listed for both disassembly and assembly.
The document provides instructions for disassembling and assembling the steering pump on a Caterpillar 950H wheel loader. It lists 28 steps for disassembly, including removing bolts, valves, springs, and other internal pump components. 34 steps are provided for assembly, instructing technicians to install components in reverse order and noting that cleanliness is important. Axial shaft end play is checked at the end to ensure proper clearance of 0.01 to 0.10 mm.
The document provides instructions for disassembling and assembling the steering pump on a Caterpillar 950H wheel loader. It lists 28 steps for disassembly, including removing bolts, valves, springs, and other internal pump components. 34 steps are provided for reassembly, instructing technicians to clean parts, install components in reverse order, and check axial shaft play clearance. The overall document provides detailed technical instructions for repair workers to fully disassemble and reassemble the steering pump.
This document provides instructions for disassembling and assembling the piston pump of a 950H wheel loader. The disassembly process involves removing 28 individual parts in a specific sequence, taking care with spring-loaded components. The assembly follows the reverse of the disassembly process and includes installing replacement O-rings and torque specifications for bolts. Safety precautions are provided to prevent injury from parts under tension.
Caterpillar cat 950 h wheel loader (prefix n1a) service repair manual (n1a000...dikdkskmmdm
The document provides instructions for disassembling and assembling the steering pump on a Caterpillar 950H wheel loader. It lists 28 steps for disassembly, including removing bolts, valves, springs, and other internal pump components. 34 steps are provided for assembly, instructing technicians to install components in reverse order and noting that cleanliness is important. A final check of axial shaft end play is specified to ensure proper clearance.
This document provides instructions for disassembling and assembling the piston pump of a 950H wheel loader. The disassembly process involves removing 28 individual parts in a specific sequence, taking care with spring-loaded components. The assembly follows the reverse of the disassembly process and includes installing replacement O-rings and torquing specified fasteners to the proper specifications. Safety precautions are provided to wear protective equipment when handling spring-loaded parts.
Caterpillar cat 962 k wheel loader (prefix t6a) service repair manual (t6a000...fjsekdhjenmdn
This document provides instructions for assembling and disassembling components of a 962K wheel loader, including:
- Assembling the piston pump by installing various parts like covers, bearings, seals, pistons, and tightening bolts in the correct order.
- Removing and installing the electrohydraulic control by disconnecting harnesses and removing screws, switches and covers.
- Removing the main control valve by draining fluids, disconnecting hoses and harnesses, and removing mounting bolts.
This document provides instructions for assembling and disassembling parts of a 962K wheel loader. It includes 37 steps to assemble a piston pump, with diagrams showing each step. It also provides procedures for removing and installing a main control valve and electrohydraulic control components, with warnings about releasing pressure before servicing hydraulic systems.
Caterpillar cat 962 k wheel loader (prefix t6a) service repair manual (t6a000...fjjskekdm
This document provides instructions for assembling and disassembling parts of a 962K wheel loader. It includes 37 steps to assemble a piston pump, with diagrams showing each step. It also provides procedures for removing and installing a main control valve and electrohydraulic control components, with warnings about releasing pressure before working on hydraulic systems.
This document provides instructions for assembling and disassembling parts of a 962K wheel loader. It includes 37 steps to assemble a piston pump, with diagrams showing each step. It also provides procedures for removing and installing a main control valve and electrohydraulic control components, with diagrams and notes about releasing pressure and supporting lifted components.
This document provides instructions for assembling a piston pump and removing and installing a main control valve. It includes 31 steps for assembling the piston pump, requiring various tools and involving installation of numerous parts in the correct order. It also lists the required tools and provides 7 steps for removing a joystick control and 1 step for installing it.
The document provides instructions for removing and installing a secondary steering pump and electric motor on a Caterpillar 962K wheel loader. It outlines 28 steps for disassembly of the steering pump that include removing bolts, valves, seals, spools, plugs, springs, and other components. The assembly section lists 34 steps for reinstalling components in reverse order and adjusting axial shaft end play.
The document provides instructions for disassembling and assembling the piston pump used in the steering system of a Caterpillar 950H wheel loader. It lists the required tools and presents the steps to disassemble the various components of the pump in 27 steps. These include removing springs, spools, pistons, bearings, and other parts. The assembly section then lists 34 steps to reassemble the pump components in the reverse order, noting precautions for parts under spring tension. A final check of axial shaft end play is specified to ensure proper assembly.
The document provides instructions for disassembling and assembling the piston pump used for steering in a Caterpillar 950H wheel loader. It details 27 steps for disassembly, including removing bolts, valves, springs, and other internal components. 34 steps are outlined for reassembly, requiring the proper tools and following precautions to prevent injury from parts under spring tension. A final step specifies checking axial shaft end play and installing correct shims to achieve the specified range of 0.01 to 0.10 mm.
This document provides disassembly and assembly instructions for the piston pump of a 950H wheel loader. The disassembly instructions list 28 steps to fully disassemble the pump, removing components like valves, plugs, springs, and bearings. The assembly section then lists 29 steps to reassemble the pump, providing the reverse of the disassembly instructions and noting any specific tools or precautions needed.
1. The document provides step-by-step instructions for disassembling and assembling the piston pump of a 962H wheel loader steering system.
2. It details 27 steps for disassembly, including removing bolts, valves, plugs, springs, and other internal components of the pump.
3. For assembly, it lists 34 steps reversing the disassembly process and provides torque specifications for tightening bolts. Safety precautions are noted for parts under spring tension.
1. The document provides step-by-step instructions for disassembling and assembling the piston pump of a 962H wheel loader steering system.
2. It details 27 steps for disassembly, including removing bolts, valves, plugs, springs, and other internal components of the pump.
3. The assembly section outlines 34 steps for reassembling the pump components in reverse order and includes precautions for working with spring-loaded parts.
1. The document provides step-by-step instructions for disassembling and assembling the piston pump of a 962H wheel loader steering system.
2. It details 27 steps for disassembly, including removing bolts, valves, plugs, springs, and other internal components of the pump.
3. The assembly section outlines 34 steps for reassembling the pump components in reverse order and includes precautions for working with spring-loaded parts.
This document provides instructions for disassembling and assembling a piston pump used in a Caterpillar 962H wheel loader. The disassembly procedure involves 28 steps to remove components like valves, plugs, spools, springs, and pistons. The assembly procedure reverses the disassembly steps and includes precautions for working with spring-loaded parts.
1. The document provides step-by-step instructions for disassembling and assembling the piston pump of a 962H wheel loader steering system.
2. It details 27 steps for disassembly, including removing bolts, valves, plugs, springs, and other internal components of the pump.
3. The assembly section outlines 34 steps for reassembling the pump components in reverse order and includes precautions for working with spring-loaded parts.
This document provides instructions for disassembling and assembling the piston pump of a 950H wheel loader. The disassembly procedure involves removing 28 individual parts in a specific sequence, taking care with spring-loaded components. The assembly procedure reverses this, installing the 28 parts in the opposite sequence and also warns of risks from spring-loaded parts. Proper tools are listed for both disassembly and assembly.
The document provides instructions for disassembling and assembling the steering pump on a Caterpillar 950H wheel loader. It lists 28 steps for disassembly, including removing bolts, valves, springs, and other internal pump components. 34 steps are provided for assembly, instructing technicians to install components in reverse order and noting that cleanliness is important. Axial shaft end play is checked at the end to ensure proper clearance of 0.01 to 0.10 mm.
The document provides instructions for disassembling and assembling the steering pump on a Caterpillar 950H wheel loader. It lists 28 steps for disassembly, including removing bolts, valves, springs, and other internal pump components. 34 steps are provided for reassembly, instructing technicians to clean parts, install components in reverse order, and check axial shaft play clearance. The overall document provides detailed technical instructions for repair workers to fully disassemble and reassemble the steering pump.
This document provides instructions for disassembling and assembling the piston pump of a 950H wheel loader. The disassembly process involves removing 28 individual parts in a specific sequence, taking care with spring-loaded components. The assembly follows the reverse of the disassembly process and includes installing replacement O-rings and torque specifications for bolts. Safety precautions are provided to prevent injury from parts under tension.
Caterpillar cat 950 h wheel loader (prefix n1a) service repair manual (n1a000...dikdkskmmdm
The document provides instructions for disassembling and assembling the steering pump on a Caterpillar 950H wheel loader. It lists 28 steps for disassembly, including removing bolts, valves, springs, and other internal pump components. 34 steps are provided for assembly, instructing technicians to install components in reverse order and noting that cleanliness is important. A final check of axial shaft end play is specified to ensure proper clearance.
This document provides instructions for disassembling and assembling the piston pump of a 950H wheel loader. The disassembly process involves removing 28 individual parts in a specific sequence, taking care with spring-loaded components. The assembly follows the reverse of the disassembly process and includes installing replacement O-rings and torquing specified fasteners to the proper specifications. Safety precautions are provided to wear protective equipment when handling spring-loaded parts.
Caterpillar cat 962 k wheel loader (prefix t6a) service repair manual (t6a000...fjsekdhjenmdn
This document provides instructions for assembling and disassembling components of a 962K wheel loader, including:
- Assembling the piston pump by installing various parts like covers, bearings, seals, pistons, and tightening bolts in the correct order.
- Removing and installing the electrohydraulic control by disconnecting harnesses and removing screws, switches and covers.
- Removing the main control valve by draining fluids, disconnecting hoses and harnesses, and removing mounting bolts.
This document provides instructions for assembling and disassembling parts of a 962K wheel loader. It includes 37 steps to assemble a piston pump, with diagrams showing each step. It also provides procedures for removing and installing a main control valve and electrohydraulic control components, with warnings about releasing pressure before servicing hydraulic systems.
Caterpillar cat 962 k wheel loader (prefix t6a) service repair manual (t6a000...fjjskekdm
This document provides instructions for assembling and disassembling parts of a 962K wheel loader. It includes 37 steps to assemble a piston pump, with diagrams showing each step. It also provides procedures for removing and installing a main control valve and electrohydraulic control components, with warnings about releasing pressure before working on hydraulic systems.
This document provides instructions for assembling and disassembling parts of a 962K wheel loader. It includes 37 steps to assemble a piston pump, with diagrams showing each step. It also provides procedures for removing and installing a main control valve and electrohydraulic control components, with diagrams and notes about releasing pressure and supporting lifted components.
This document provides instructions for assembling a piston pump and removing and installing a main control valve. It includes 31 steps for assembling the piston pump, requiring various tools and involving installation of numerous parts in the correct order. It also lists the required tools and provides 7 steps for removing a joystick control and 1 step for installing it.
Similar to Caterpillar Cat 966K Wheel Loader (Prefix TFS) Service Repair Manual Instant Download.pdf (20)
JOHN DEERE 430 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...qianxu35543635
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians to service these tractor models. The manual contents are organized into sections covering general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and diagnostics.
JOHN DEERE 332 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...qianxu35543635
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians to service these tractor models. The manual contents are organized into sections covering general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and diagnostics.
JOHN DEERE 330 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...qianxu35543635
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians to service these tractor models. The manual contents are organized into sections covering general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and diagnostics.
JOHN DEERE 322 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...qianxu35543635
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians to service these tractor models. Safety messages throughout warn of hazards involving high pressure fluids, battery explosions, fire risks, and preventing acid burns or injuries from hazardous chemicals.
John Deere 261 and 272 Rear-Mounted Mowers Service Repair Manual Instant Down...qianxu35543635
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including various mowers, tillers, blades, brooms, and snowblowers. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
John Deere 74 and 84 Blades Service Repair Manual Instant Download.pdfqianxu35543635
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
John Deere 54D, 60D, 62D AND 72D OnRamp Mowers Service Repair Manual Instant ...qianxu35543635
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 54D, 60D and 72 Service Repair Manual Instant Download.pdfqianxu35543635
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
John Deere 54, 60 and 72-Inch Mid Mount Mowers Service Repair Manual Instant ...qianxu35543635
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
John Deere 47 and 59 Snowbowers Service Repair Manual Instant Download.pdfqianxu35543635
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
John Deere 31B Post Hole Digger Service Repair Manual Instant Download.pdfqianxu35543635
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 26 and 51-Inch Brooms Service Repair Manual Instant Download.pdfqianxu35543635
This technical manual provides service and repair information for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep related information together and presents specifications, safety information, and repair and maintenance instructions for each product. It is intended as a reference for experienced technicians working with these equipment types.
John Deere 5E 2BV Blower Service Repair Manual Instant Download (TM1430).pdfqianxu35543635
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, listing details like engine type, displacement, speed ranges, components, and dimensions for each model. Safety guidelines are also provided, advising users to keep others away from operating equipment, avoid overreaching or pointing tools at people, and always shut off engines before adjusting or refueling.
The document provides instructions for disassembling a cylinder head from a D11N track-type tractor. The procedures include removing inlet and exhaust valves, bridge dowels, valve seat inserts, valve guides, and valve lifters. Tools required are listed for each step. Safety notices emphasize keeping parts clean and wearing protective equipment when compressing valve springs.
The document is a service repair manual that provides instructions for removing and installing the high-low transmission on a D8L track-type tractor. It details 58 steps to disassemble the transmission, including removing transmission components like the clutch group, carrier, discs, plates, pistons and gears. It then provides 57 steps to reassemble the transmission, cleaning and inspecting parts and placing components in position with the correct rings, seals, bolts and springs.
The document provides instructions for removing and installing the bulldozer blade on a D6R Track-Type Tractor. The key steps include:
1. Disconnecting hydraulic hoses from the manifold and capping the connections.
2. Removing bolts, caps, and shims from the lift cylinders and stabilizer link.
3. Installing tooling under the push arms and retracting the lift cylinders to support the bulldozer blade.
Caterpillar Cat D4HTSK III TRACK SKIDDER (Prefix 7PK) Service Repair Manual I...qianxu35543635
This document provides instructions for removing and installing the cylinder head assembly on a Caterpillar 3304 engine. The steps include draining coolant, removing exhaust manifolds, valve covers, belts, hoses, wires and other components. The cylinder head bolts are then removed to lift off the head. Reinstallation follows the reverse order, applying thread lubricant and torquing bolts to the specified values. Valve clearance is adjusted at the end.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Automotive Engine Valve Manufacturing Plant Project Report.pptxSmith Anderson
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
2. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 966K WHEEL LOADER TFS
Configuration: 966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
966K and 972K Wheel Loaders Machine Systems
Media Number -KENR5833-01 Publication Date -01/03/2011 Date Updated -21/03/2016
i02288174
Piston Pump (Steering) - Assemble
SMCS - 4306-016; 5070-016-ZH
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-4878 Plate(1)
1
B 1P-1861 Retaining Ring Pliers 1
(1)
33.3 mm (1.31 inch) diameter
Illustration 1 g01145369
1. Lower the temperature of bearing cup (48).
2. Install bearing cup (48).
1/10
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. 3. Install bearings (49) and (51).
4. Install screws (50).
Illustration 2 g01145368
5. Install seal (47).
6. Use Tooling (B) in order to install retaining ring (46).
Illustration 3 g01145367
7. Install bearing cone (45).
2/10
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 4 g01145366
8. Install swashplate (44) and spacer plates (43).
Illustration 5 g01145365
9. Install pistons (42) and the plate.
10. Install bolts (40) and spacer plates (41).
Illustration 6 g01145362
11. Install O-ring seal (38) onto the cover. Install O-ring seal (39) onto the plug.
12. Install shaft (37).
3/10
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Illustration 7 g01145361
13. Install cover (35) and bolts (34).
14. Install plug (36).
Illustration 8 g01145359
Illustration 9 g01145360
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
15. Use Tooling (A) and a suitable press to assemble barrel assembly (29).
a. Install spring (31) and washers (32).
4/10
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. b. Compress spring (31) until Tooling (A) is below retaining ring (33).
c. Install retaining ring (33) and slowly release the spring tension.
Illustration 10 g01145358
16. Install barrel assembly (29) and spacer (28).
17. Install spring (27) and piston (30).
Illustration 11 g01145357
18. Install bearing cone (26) and gasket (9).
5/10
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 12 g01145523
19. Install bearing cup (23) and pin (24).
Illustration 13 g01145522
20. Install plate (22).
Illustration 14 g01145356
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
21. Install head (21) and bolts (20).
22. Tighten bolts (20) to a torque of 91 ± 4 N·m (67 ± 3 lb ft).
6/10
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 15 g01145355
23. Install elbow (19) and bolts (18).
Illustration 16 g01145354
24. Install the O-ring seals onto adjustment screw (9) and adjustment screw (10).
25. Install retainer (15), spring (16), and retainer (17).
26. Remove retainer (11), spring (12), spacer (13), and retainer (14).
Illustration 17 g01145342
7/10
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install adjustment screw (9) and adjustment screw (10).
Illustration 18 g01145341
28. Install spool (7) and spool (8).
29. Install the O-ring seals onto plug (5) and plug (6).
Illustration 19 g01145340
30. Install the O-ring seal, plug (4), plug (5), and plug (6).
8/10
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 20 g01145339
31. Install O-ring seals (3) onto valve (2).
Illustration 21 g01145338
32. Install valve (2) and bolts (1).
33. Tighten bolts (1) to a torque of 34 ± 3 N·m (25 ± 2 lb ft).
Illustration 22 g00359153
34. Use a dial indicator to check the axial shaft end play. Put the dial indicator on the end of the
shaft and pull on the shaft.
9/10
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. The correct axial shaft end play is 0.01 to 0.10 mm (0.0004 to 0.004 inch). Use the correct
shim to achieve this dimension.
End By:
a. Install the steering pump. Refer to Disassembly and Assembly, "Piston Pump (Steering) -
Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Apr 6 17:04:57 UTC+0800 2020
10/10
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SE...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 966K WHEEL LOADER TFS
Configuration: 966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
966K and 972K Wheel Loaders Machine Systems
Media Number -KENR5833-01 Publication Date -01/03/2011 Date Updated -21/03/2016
i04030837
Secondary Steering Pump and Electric Motor - Remove and
Install
SMCS - 4324-010-SE; 4324-010; 4324-010-GT; 4324-010-MW; 4325-010-SE; 5073-010-SST
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
FT-1114 Vacuum Cap 1
5P-0306 Vacuum Transducer 1
6V-4142 Fitting 1
5K-5068 Fitting 1
Start By:
a. Hydraulic tank oil retain.
b. Remove the power train guard.
1/3
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Illustration 1 g02456779
1. Remove bolts (1) and ladder assembly (2).
Illustration 2 g01150593
2. Remove cover assembly (3).
Illustration 3 g01150594
3. Disconnect cable assemblies (4) and harness assembly (7) from electric motor (5).
4. Disconnect hose assembly (6) from secondary steering pump (8).
2/3
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 4 g01150595
5. Remove bolts (9) in order to remove electric motor (5) and secondary steering pump (8).
Illustration 5 g01150603
6. Remove bracket assembly (11).
7. Remove bolts (10) in order to remove secondary steering pump (8) and the gasket from
electric motor (5).
Installation Procedure
1. Install secondary steering pump (8) in the reverse order of the removal.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Apr 6 17:05:52 UTC+0800 2020
3/3
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 966K WHEEL LOADER TFS
Configuration: 966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
966K and 972K Wheel Loaders Machine Systems
Media Number -KENR5833-01 Publication Date -01/03/2011 Date Updated -21/03/2016
i04083151
Secondary Steering Valve - Remove and Install
SMCS - 4343-010
Removal Procedure
Start By:
a. Remove the cab.
Illustration 1 g02291393
1. Disconnect harness assemblies (4) and hose assemblies (2) from control valve (1).
2. Remove bolts (3) and secondary steering control valve (1).
Installation Procedure
1. Install secondary steering control valve (1) in the reverse order of the removal.
Mon Apr 6 17:06:48 UTC+0800 2020
1/2
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 966K WHEEL LOADER TFS
Configuration: 966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
966K and 972K Wheel Loaders Machine Systems
Media Number -KENR5833-01 Publication Date -01/03/2011 Date Updated -21/03/2016
i04084410
Secondary Steering Valve - Disassemble
SMCS - 4339-015
Disassembly Procedure
Start By:
a. Remove the secondary steering valve.
Illustration 1 g02292713
1/3
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Illustration 2 g02292913
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Remove the following items from secondary steering valve (1): plugs (5), O-ring seals (4),
springs (3) and valves (2).
Illustration 3 g02293407
2. Mark the location of switch assemblies (6) and (7) for assembly purposes.
3. Remove sensor assemblies (6) and (7) from secondary steering valve (1).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Mon Apr 6 17:07:44 UTC+0800 2020
2/3
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 966K WHEEL LOADER TFS
Configuration: 966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
966K and 972K Wheel Loaders Machine Systems
Media Number -KENR5833-01 Publication Date -01/03/2011 Date Updated -21/03/2016
i04086233
Secondary Steering Valve - Assemble
SMCS - 4339-016
Assembly Procedure
Illustration 1 g02293407
1. Install sensor assemblies (6) and (7) in secondary steering valve (1). Tighten sensor
assemblies (6) and (7) to a torque of 30 ± 3 N·m (22 ± 2 lb ft).
1/3
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Illustration 2 g02292713
Illustration 3 g02292913
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
2. Install the following items in secondary steering valve (1): valves (2), springs (3), O-ring
seals (4) and plugs (5). Tighten plugs (5) to a torque of 210 ± 20 N·m (155 ± 15 lb ft).
End By:
a. Install the secondary steering valve.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Mon Apr 6 17:08:40 UTC+0800 2020
2/3
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 966K WHEEL LOADER TFS
Configuration: 966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
966K and 972K Wheel Loaders Machine Systems
Media Number -KENR5833-01 Publication Date -01/03/2011 Date Updated -21/03/2016
i02296951
Gear Pump (Secondary Steering) - Disassemble
SMCS - 4324-015-GT; 5073-015-SST
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1857 Retaining Ring Pliers 1
Start By:
a. Remove the gear pump. Refer to Disassembly and Assembly, "Secondary Steering Pump
and Electric Motor - Remove".
Illustration 1 g01150348
1. Remove valve (1).
1/4
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. Illustration 2 g01150349
2. Remove plug (2), bolts (3), and cover (4).
Illustration 3 g01150350
3. Remove housing (5) and O-ring seal (6).
Illustration 4 g01150351
4. Remove O-ring seal (7).
2/4
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
23. Illustration 5 g01150352
5. Remove bearing (8), seal (9), and backup ring (10).
Illustration 6 g01150353
6. Remove gears (11).
Illustration 7 g01150354
7. Remove bearing (12).
3/4
966K Wheel Loader TFS00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/4/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...