The document provides instructions for disassembling and assembling the free wheel components of a torque converter. It outlines 20 steps to disassemble the components which include removing bolts, retaining rings, gears, bearings and other parts. It then lists 10 steps for reassembling the components in the reverse order, noting to lower the temperature of some parts before installation and specifying torques for bolts. Tools required include link brackets, forcing screws, retaining ring pliers and a driver group.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
2. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 938G II WHEEL LOADER B9Y
Configuration: 938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 3126B ENGINE
Disassembly and Assembly
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power
Train
Media Number -RENR6068-03 Publication Date -01/12/2008 Date Updated -19/12/2008
i01886319
Torque Converter - Disassemble - Fixed
SMCS - 3101-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
B 154-6181 Forcing Screw 2
C 2P-8312 Retaining Ring Pliers 1
D 1P-0520 Driver Gp 1
Start By:
A. Separate the torque converter from the transmission. Refer to Disassembly and Assembly,
"Torque Converter - Separate".
1/7
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. Illustration 1 g00978219
1. Install Tooling (A) and a suitable lifting device onto cover (2). The weight of cover (2) is
approximately 159 kg (350 lb). Remove bolts (1) and remove cover (2) .
Illustration 2 g00978237
2. Attach Tooling (A) and a suitable lifting device onto the torque converter assembly. The
weight of the torque converter assembly is approximately 75 kg (165 lb). Place torque
converter assembly on a bench and remove bolts (3) .
2/7
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 3 g00978253
3. Install Tooling (B) and remove the impeller and carrier assembly (4). The weight of
impeller and carrier assembly (4) is approximately 36 kg (80 lb).
Illustration 4 g00978993
4. Use Tooling (C) and remove retaining ring (6). Remove retaining ring (5) and stator (7) .
Illustration 5 g00978994
3/7
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. 5. If necessary, use a suitable press and Tooling (D) in order to remove adapter (8) from stator
(7) .
Illustration 6 g00978996
6. Use Tooling (C) in order to remove retaining ring (11) from carrier assembly (12). Remove
spacer (10) .
Illustration 7 g00978998
7. Use a soft faced hammer in order to remove carrier assembly (12) from impeller (9) .
4/7
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Illustration 8 g00979011
8. Remove retaining ring (13) from carrier assembly (12) .
Illustration 9 g00979012
9. Remove bolts (14) and remove gear (15) from impeller (16) .
Illustration 10 g00979015
10. Use a suitable press and Tooling (D) in order to remove bearing (17) from impeller (16) .
5/7
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 11 g00979023
11. Remove retaining ring (18) and cover (19) .
Illustration 12 g00979026
12. Remove O-ring seal (20). Use Tooling (C) and remove retaining ring (21) .
6/7
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 13 g00979029
13. Remove spacer (22) .
Illustration 14 g00979030
14. Use a suitable press and Tooling (D) in order to remove bearing (24) from housing (23) .
Illustration 15 g00979033
15. Remove bolts (25) and hub assembly (26) from turbine (27) .
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri May 1 18:20:55 UTC+0800 2020
7/7
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 938G II WHEEL LOADER B9Y
Configuration: 938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 3126B ENGINE
Disassembly and Assembly
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power
Train
Media Number -RENR6068-03 Publication Date -01/12/2008 Date Updated -19/12/2008
i01885710
Torque Converter - Disassemble - Free Wheel
SMCS - 3101-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
B 154-6181 Forcing Screw 2
C 2P-8312 Retaining Ring Pliers 1
D 1P-0520 Driver Gp 1
Start By:
A. Separate the torque converter from the transmission. Refer to Disassembly and Assembly,
"Torque Converter - Separate".
1/10
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 1 g00978219
1. Install Tooling (A) and a suitable lifting device onto cover (2). The weight of cover (2) is
approximately 159 kg (350 lb). Remove bolts (1) and remove cover (2) .
Illustration 2 g00978237
2. Attach Tooling (A) and a suitable lifting device onto the torque converter assembly. The
weight of the torque converter assembly is approximately 75 kg (165 lb). Place torque
converter assembly on a bench and remove bolts (3) .
2/10
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Illustration 3 g00978253
3. Install Tooling (B) and remove the impeller and carrier assembly (4). The weight of
impeller and carrier assembly (4) is approximately 36 kg (80 lb).
Illustration 4 g00978315
4. Use Tooling (C) in order to remove retaining ring (5). Remove stator (14) .
Illustration 5 g00978321
3/10
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. 5. Remove retaining ring (6) and plate (7) .
Illustration 6 g00978328
6. Remove washer (8) .
Illustration 7 g00978338
7. Remove race (9) .
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4/10
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Illustration 8 g00978386
8. Remove springs (10) and rollers (11) .
Illustration 9 g00978401
9. Remove retaining ring (12) and washer (13) .
5/10
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 10 g00978407
Illustration 11 g00978755
10. If necessary, raise the temperature of stator (14) and cam (15). Use a suitable press and
Tooling (D) in order to remove cam (15) .
Illustration 12 g00978759
11. Remove spacer (16) .
6/10
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Illustration 13 g00978760
12. Use a soft faced hammer in order to remove carrier assembly (17) from impeller (18) .
Illustration 14 g00978763
13. Remove retaining ring (19) from carrier assembly (17) .
Illustration 15 g00978766
14. Remove bolts (20). Remove gear (21) from impeller (18) .
7/10
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 16 g00978776
15. Use a suitable press and Tooling (D) in order to remove bearing (22) .
Illustration 17 g00978779
16. Remove retaining ring (23) and cover (24) .
Illustration 18 g00978780
17. Use Tooling (C) and remove retaining ring (25). Remove O-ring seal (26) .
8/10
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Illustration 19 g00978792
18. Remove spacer (27) .
Illustration 20 g00978794
19. Use a suitable press and Tooling (D) in order to remove bearing (28) from housing (29) .
9/10
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. Illustration 21 g00978797
20. Remove bolts (30). Remove hub (31) from turbine (32) .
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri May 1 18:21:52 UTC+0800 2020
10/10
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY ...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 938G II WHEEL LOADER B9Y
Configuration: 938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 3126B ENGINE
Disassembly and Assembly
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power
Train
Media Number -RENR6068-03 Publication Date -01/12/2008 Date Updated -19/12/2008
i01885788
Torque Converter - Assemble - Free Wheel
SMCS - 3101-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
C 2P-8312 Retaining Ring Pliers 1
Illustration 1 g00978839
1. Lower the temperature of bearing (28) and install bearing (28) into housing (29) .
1/8
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Illustration 2 g00978842
2. Install bolts (30). Tighten bolts (30) to a torque of 60 ± 7 N·m (44 ± 5 lb ft).
Illustration 3 g00978837
3. Lower the temperature of hub assembly (31) and install hub (31) into housing (29) .
Illustration 4 g00983541
2/8
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
4. Install a new O-ring seal (26). Install spacer (27). Use Tooling (C) and install retaining ring
(25) .
Illustration 5 g00978779
5. Position cover (24) and install retaining ring (23) .
Illustration 6 g00978885
6. Lower the temperature of bearing (22) and install bearing (22) .
3/8
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Illustration 7 g00978766
7. Install gear (21) onto impeller (18). Install bolts (20). Tighten bolts (20) to a torque of 105 ±
15 N·m (77 ± 11 lb ft).
Illustration 8 g00978763
8. Install retaining ring (19) onto carrier assembly (17) .
Illustration 9 g00978886
4/8
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. 9. Use a soft faced hammer and install carrier assembly (17) .
Illustration 10 g00978759
10. Install spacer (16) .
Illustration 11 g00978905
11. Install race (9) .
5/8
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
25. Illustration 12 g00978906
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
12. Install rollers (11) and springs (10). Install springs (10) with the maximum number of loops
toward the outside diameter of the cam.
Illustration 13 g00978908
13. Install washer (13) and retaining ring (12) .
Illustration 14 g00978328
6/8
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
26. 14. Install washer (8) .
Illustration 15 g00978321
15. Install plate (7) and install retaining ring (6) .
Illustration 16 g00983544
16. Install stator (14) onto carrier assembly (17). Use Tooling (C) and install retaining ring (5) .
7/8
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...