This document provides instructions for disassembling the transmission and torque converter of a 924G or 924Gz wheel loader. It lists the required tools and gives step-by-step instructions with illustrations. Some key steps include removing the torque converter, valve assemblies, gears, bearing cups, clutch groups, seals, plates, discs, retainers, springs and other internal components. Cleanliness is emphasized throughout the process to prevent dirt from entering the transmission.
Caterpillar Cat 924G and 924Gz Wheel Loader (Prefix RTA) Service Repair Manua...9fikslkddmd8u
This document provides instructions for disassembling the transmission and torque converter of a 924G or 924Gz wheel loader. It lists 50 steps to completely disassemble the transmission, removing components like gears, plates, seals, bearings, and clutch groups. Special tools are required for tasks like compressing clutch springs and removing certain parts. Cleanliness is emphasized throughout to prevent dirt from contaminating internal parts.
This document provides disassembly instructions for a transmission and torque converter for wheel loader models 924G and 924Gz. It lists the required tools and presents a step-by-step process to disassemble the transmission, torque converter, and various clutch groups within the transmission. The disassembly involves removing bolts, seals, gears, plates, discs, bearings, springs, and other internal components. Cleanliness during disassembly is emphasized.
Caterpillar Cat 924G and 924Gz Wheel Loader (Prefix DDA) Service Repair Manua...9fiisekodkdmd
This document provides instructions for disassembling the transmission and torque converter of a 924G or 924Gz wheel loader. It lists the required tools and presents a step-by-step process with illustrations. Some key steps include removing the torque converter, various clutch groups, gears, seals, bearings, and other internal components. Cleanliness is emphasized throughout the disassembly process to prevent dirt from entering the transmission.
This document provides disassembly instructions for a transmission and torque converter for wheel loader models 924G and 924Gz. It lists the required tools and presents a step-by-step process to disassemble the transmission, torque converter, and various internal components such as clutches, gears, seals, and bearings. Close attention is paid to cleaning, marking parts, and noting the order of plates and discs during disassembly.
This document provides disassembly instructions for a transmission and torque converter for wheel loader models 924G and 924Gz. It lists the required tools and presents a step-by-step process to disassemble the transmission, torque converter, and various internal components such as clutches, gears, seals, and bearings. Cleanliness is emphasized throughout the disassembly process to prevent dirt from entering internal mechanisms.
This document provides instructions for disassembling the transmission and torque converter of a 924G or 924Gz wheel loader. It lists the required tools and presents a step-by-step process with illustrations. Some key steps include removing the torque converter, various clutch groups, gears, seals, bearings, and other internal components. Cleanliness is emphasized throughout the disassembly process to prevent dirt from entering the transmission.
Caterpillar Cat 924G and 924Gz Wheel Loader (Prefix DDA) Service Repair Manua...9fikslkddmd8u
This document provides instructions for disassembling the transmission and torque converter of a 924G or 924Gz wheel loader. It lists the required tools and presents a step-by-step process with illustrations. Some key steps include removing the torque converter, various clutch groups, gears, seals, bearings, and other internal components. Cleanliness is emphasized throughout the disassembly process to prevent dirt from entering the transmission.
This document provides disassembly instructions for the transmission and torque converter of a 930G wheel loader. It lists required tools and parts and provides a step-by-step process to disassemble the various components of the transmission, including removing plates, discs, gears, seals, bearings, and other parts. Safety precautions are included for releasing spring forces. Detailed illustrations accompany each step.
Caterpillar Cat 924G and 924Gz Wheel Loader (Prefix RTA) Service Repair Manua...9fikslkddmd8u
This document provides instructions for disassembling the transmission and torque converter of a 924G or 924Gz wheel loader. It lists 50 steps to completely disassemble the transmission, removing components like gears, plates, seals, bearings, and clutch groups. Special tools are required for tasks like compressing clutch springs and removing certain parts. Cleanliness is emphasized throughout to prevent dirt from contaminating internal parts.
This document provides disassembly instructions for a transmission and torque converter for wheel loader models 924G and 924Gz. It lists the required tools and presents a step-by-step process to disassemble the transmission, torque converter, and various clutch groups within the transmission. The disassembly involves removing bolts, seals, gears, plates, discs, bearings, springs, and other internal components. Cleanliness during disassembly is emphasized.
Caterpillar Cat 924G and 924Gz Wheel Loader (Prefix DDA) Service Repair Manua...9fiisekodkdmd
This document provides instructions for disassembling the transmission and torque converter of a 924G or 924Gz wheel loader. It lists the required tools and presents a step-by-step process with illustrations. Some key steps include removing the torque converter, various clutch groups, gears, seals, bearings, and other internal components. Cleanliness is emphasized throughout the disassembly process to prevent dirt from entering the transmission.
This document provides disassembly instructions for a transmission and torque converter for wheel loader models 924G and 924Gz. It lists the required tools and presents a step-by-step process to disassemble the transmission, torque converter, and various internal components such as clutches, gears, seals, and bearings. Close attention is paid to cleaning, marking parts, and noting the order of plates and discs during disassembly.
This document provides disassembly instructions for a transmission and torque converter for wheel loader models 924G and 924Gz. It lists the required tools and presents a step-by-step process to disassemble the transmission, torque converter, and various internal components such as clutches, gears, seals, and bearings. Cleanliness is emphasized throughout the disassembly process to prevent dirt from entering internal mechanisms.
This document provides instructions for disassembling the transmission and torque converter of a 924G or 924Gz wheel loader. It lists the required tools and presents a step-by-step process with illustrations. Some key steps include removing the torque converter, various clutch groups, gears, seals, bearings, and other internal components. Cleanliness is emphasized throughout the disassembly process to prevent dirt from entering the transmission.
Caterpillar Cat 924G and 924Gz Wheel Loader (Prefix DDA) Service Repair Manua...9fikslkddmd8u
This document provides instructions for disassembling the transmission and torque converter of a 924G or 924Gz wheel loader. It lists the required tools and presents a step-by-step process with illustrations. Some key steps include removing the torque converter, various clutch groups, gears, seals, bearings, and other internal components. Cleanliness is emphasized throughout the disassembly process to prevent dirt from entering the transmission.
This document provides disassembly instructions for the transmission and torque converter of a 930G wheel loader. It lists required tools and parts and provides a step-by-step process to disassemble the various components of the transmission, including removing plates, discs, gears, seals, bearings, and other parts. Safety precautions are included for releasing spring forces. Detailed illustrations accompany each step.
This document provides disassembly instructions for the transmission and torque converter of a 930G wheel loader. It lists required tools and parts and provides a step-by-step process to disassemble the various components of the transmission, including removing plates, discs, gears, seals, bearings, and other parts. Safety precautions are included for releasing clutch spring forces. Detailed illustrations accompany each step.
This document provides disassembly instructions for the transmission and torque converter of a 930G wheel loader. It lists required tools and parts and provides a step-by-step process to disassemble the various components of the transmission, including removing plates, discs, gears, seals, bearings, and other parts. Safety precautions are included for releasing spring forces. Detailed illustrations accompany each step.
This document provides disassembly instructions for the transmission and torque converter of a Caterpillar 928G wheel loader. It outlines 50 steps to fully disassemble the components. Required tools include a transmission repair stand, lifting brackets, pullers, and compressed air. Key parts that are disassembled include the torque converter, valve body, gears, bearing cups, clutch groups, seals, and plates/discs. Cleanliness and noting part order are emphasized throughout the process.
This document provides disassembly instructions for the transmission and torque converter of a Caterpillar 928G wheel loader. It outlines 66 steps to fully disassemble the transmission components. Required tools include a transmission repair stand, lifting brackets, pullers, and air compressors. Components that are disassembled include valve assemblies, gears, bearing cups, clutch groups, seals, plates, discs, pistons, and more. Cleanliness is important during disassembly to prevent dirt from entering internal mechanisms.
This document provides disassembly instructions for the transmission and torque converter of a Caterpillar 928G wheel loader. It outlines 66 steps to fully disassemble the transmission components. Required tools include a transmission repair stand, lifting brackets, pullers, and air compressors. Components that are disassembled include valve assemblies, gears, bearing cups, clutch groups, seals, and plates/discs. Cleanliness is important during disassembly to prevent dirt from entering internal mechanisms.
Caterpillar Cat 924G and 924Gz Wheel Loader (Prefix AAB) Service Repair Manua...9fiisekodkdmd
This document provides disassembly instructions for the power shift transmission on 924G and 924Gz wheel loaders. It outlines 71 steps to fully disassemble the transmission, including removing individual components like gears, shafts, seals, bearings, and clutch groups. Precision tools are required and notes emphasize cleanliness during disassembly to prevent dirt from entering internal mechanisms.
Caterpillar Cat 924G and 924Gz Wheel Loader (Prefix AAB) Service Repair Manua...9fikslkddmd8u
The document provides disassembly instructions for the power shift transmission of 924G and 924Gz wheel loaders. It lists 57 steps to fully disassemble the transmission along with required tools. Key components that are disassembled include the torque converter, gear assemblies, clutch groups, seals, bearings, and other internal transmission parts. Detailed illustrations accompany each step to show how to remove individual parts in the proper sequence. Cleanliness is emphasized during the disassembly process to prevent dirt from entering the transmission.
The document provides disassembly instructions for the power shift transmission of 924G and 924Gz wheel loaders. It lists 57 steps to fully disassemble the transmission along with required tools. Key components that are disassembled include the torque converter, gear assemblies, clutch groups, seals, bearings, and plates/discs. Detailed illustrations accompany each step to show how to remove individual parts in the proper sequence. Cleanliness is emphasized throughout the disassembly process.
This service repair manual provides instructions for disassembling the power shift transmission of 924G and 924Gz wheel loaders. The disassembly procedure involves 71 steps to remove components like the torque converter, clutch groups, gears, shafts, seals, and bearings. Various tools are required, and cleanliness is important to prevent dirt from entering during reassembly. Detailed illustrations accompany each step to show how to properly disassemble the transmission.
The document provides disassembly instructions for the power shift transmission of 924G and 924Gz wheel loaders. It lists 57 steps to fully disassemble the transmission along with required tools. Key components that are disassembled include the torque converter, gear assemblies, clutch groups, seals, bearings, and plates/discs. Detailed illustrations accompany each step to show how to remove individual parts in the proper sequence. Cleanliness is emphasized throughout to prevent dirt from entering internal mechanisms during disassembly.
This service repair manual provides instructions for disassembling the power shift transmission of 924G and 924Gz wheel loaders. The disassembly procedure involves 71 steps to remove components like the torque converter, clutch groups, gears, shafts, seals, and bearings. Various tools are required, and cleanliness is important to prevent dirt from entering during reassembly. Detailed illustrations accompany each step to show how components connect and disassemble.
Caterpillar Cat 924G and 924Gz Wheel Loader (Prefix 3DZ) Service Repair Manua...9fiisekodkdmd
This document provides disassembly instructions for the power shift transmission of a 924G and 924Gz wheel loader. It lists 70 steps to fully disassemble the transmission, removing components like gears, clutches, seals, bearings and shafts. Special tools are required for tasks like compressing springs and pulling components. Cleanliness is emphasized throughout to prevent dirt from entering the transmission during disassembly.
This service repair manual provides instructions for disassembling the power shift transmission of a 924G or 924Gz wheel loader. It lists 70 steps to fully disassemble the transmission, removing components like gears, clutches, seals, bearings and shafts. Pictures and exploded diagrams accompany each step to illustrate the proper procedure. Cleaning is important during disassembly to prevent dirt from entering internal mechanisms.
This service repair manual provides instructions for disassembling the power shift transmission on Caterpillar 924G and 924Gz wheel loaders. It outlines 59 steps to fully disassemble the transmission, including removing individual gears, clutches, seals, and other components. Required tools are listed. Detailed illustrations accompany each step to show how to remove specific parts in the correct order. Cleanliness is emphasized during disassembly to prevent dirt from entering internal mechanisms.
This document provides disassembly instructions for the power shift transmission of a 924G and 924Gz wheel loader. It lists 70 steps to fully disassemble the transmission, removing components like gears, clutches, seals, bearings and shafts. Special tools are required for tasks like compressing springs and pulling components. Cleanliness is emphasized throughout to prevent dirt from entering the transmission during disassembly.
Caterpillar Cat 924G and 924Gz Wheel Loader (Prefix 3DZ) Service Repair Manua...9fikslkddmd8u
This document provides instructions for disassembling the power shift transmission on Caterpillar 924G and 924Gz wheel loaders. The summary is as follows:
1) Place the transmission on a repair stand and remove components like the torque converter, top case, selector valve, and flex plate.
2) Remove gears, bearings, seals, and clutch groups including the forward low and high, reverse second, and first third gear clutches.
3) Clean parts and inspect them for wear during disassembly. Take note of order and numbers of plates and discs for reassembly.
This document provides disassembly instructions for the power shift transmission of Caterpillar 924G and 924Gz wheel loaders. It describes 59 steps to fully disassemble the transmission, including removing the top case, torque converter, gears, bearings, seals, and individual clutch groups like the forward low and high clutches, reverse second gear clutch, and first third gear clutch. Precautions are given to clean components thoroughly and note part orders for reassembly. Required specialty tools are listed.
This document provides instructions for disassembling the power shift transmission of a 924G and 924Gz wheel loader. It outlines 59 steps to fully disassemble the transmission, including removing the top case, torque converter, gears, bearings, seals, and individual clutch groups like the forward low and high clutches, reverse second gear clutch, and first third gear clutch. Tools required are listed. Cleanliness is emphasized when disassembling to prevent dirt entry.
This document provides instructions for disassembling the components of a 988K wheel loader torque converter. It lists over 60 individual steps to remove parts like the housing assembly, shaft assembly, carrier assembly, impeller, piston, seals, bearings, and other internal components. Detailed illustrations accompany each step. Special tools are required to separate certain components, and safety precautions are noted due to the heavy weight of assemblies that need to be lifted out.
This document provides disassembly instructions for a 986H wheel loader transmission planetary system in 3 sentences or less:
The document outlines 75 steps to disassemble the transmission planetary system, removing components like planetary gears, clutch housings, pistons, seals, and other parts. Tools required include a transmission repair stand, eyebolts, clamps, retaining ring pliers, external pliers, drivers, and other specialized tools to aid in disassembly. Cleanliness is emphasized as dirt could enter the transmission during disassembly.
This document provides disassembly instructions for the transmission planetary of a 986H wheel loader. It outlines 59 steps to fully disassemble the transmission, including removing planetary gears, clutch housings, pistons, seals, gears, and other components. Tools required include a transmission repair stand, eyebolts, clamps, retaining ring pliers, external pliers, drivers, and slide hammers. Detailed illustrations accompany each step. Safety precautions are provided to prevent injury from released spring forces.
This document provides assembly instructions for a torque converter in a 982M wheel loader. It outlines 51 steps to assemble the internal components of the torque converter and attach it to the transmission and output transfer gears. The instructions include installing seals, bearings, gears, plates, springs, and bolts. Tolerances and torque specifications are provided. The final step is to connect the assembled torque converter to the transmission and output transfer gears.
More Related Content
Similar to Caterpillar Cat 924G Wheel Loader (Prefix RBB) Service Repair Manual (RBB00001 and up).pdf
This document provides disassembly instructions for the transmission and torque converter of a 930G wheel loader. It lists required tools and parts and provides a step-by-step process to disassemble the various components of the transmission, including removing plates, discs, gears, seals, bearings, and other parts. Safety precautions are included for releasing clutch spring forces. Detailed illustrations accompany each step.
This document provides disassembly instructions for the transmission and torque converter of a 930G wheel loader. It lists required tools and parts and provides a step-by-step process to disassemble the various components of the transmission, including removing plates, discs, gears, seals, bearings, and other parts. Safety precautions are included for releasing spring forces. Detailed illustrations accompany each step.
This document provides disassembly instructions for the transmission and torque converter of a Caterpillar 928G wheel loader. It outlines 50 steps to fully disassemble the components. Required tools include a transmission repair stand, lifting brackets, pullers, and compressed air. Key parts that are disassembled include the torque converter, valve body, gears, bearing cups, clutch groups, seals, and plates/discs. Cleanliness and noting part order are emphasized throughout the process.
This document provides disassembly instructions for the transmission and torque converter of a Caterpillar 928G wheel loader. It outlines 66 steps to fully disassemble the transmission components. Required tools include a transmission repair stand, lifting brackets, pullers, and air compressors. Components that are disassembled include valve assemblies, gears, bearing cups, clutch groups, seals, plates, discs, pistons, and more. Cleanliness is important during disassembly to prevent dirt from entering internal mechanisms.
This document provides disassembly instructions for the transmission and torque converter of a Caterpillar 928G wheel loader. It outlines 66 steps to fully disassemble the transmission components. Required tools include a transmission repair stand, lifting brackets, pullers, and air compressors. Components that are disassembled include valve assemblies, gears, bearing cups, clutch groups, seals, and plates/discs. Cleanliness is important during disassembly to prevent dirt from entering internal mechanisms.
Caterpillar Cat 924G and 924Gz Wheel Loader (Prefix AAB) Service Repair Manua...9fiisekodkdmd
This document provides disassembly instructions for the power shift transmission on 924G and 924Gz wheel loaders. It outlines 71 steps to fully disassemble the transmission, including removing individual components like gears, shafts, seals, bearings, and clutch groups. Precision tools are required and notes emphasize cleanliness during disassembly to prevent dirt from entering internal mechanisms.
Caterpillar Cat 924G and 924Gz Wheel Loader (Prefix AAB) Service Repair Manua...9fikslkddmd8u
The document provides disassembly instructions for the power shift transmission of 924G and 924Gz wheel loaders. It lists 57 steps to fully disassemble the transmission along with required tools. Key components that are disassembled include the torque converter, gear assemblies, clutch groups, seals, bearings, and other internal transmission parts. Detailed illustrations accompany each step to show how to remove individual parts in the proper sequence. Cleanliness is emphasized during the disassembly process to prevent dirt from entering the transmission.
The document provides disassembly instructions for the power shift transmission of 924G and 924Gz wheel loaders. It lists 57 steps to fully disassemble the transmission along with required tools. Key components that are disassembled include the torque converter, gear assemblies, clutch groups, seals, bearings, and plates/discs. Detailed illustrations accompany each step to show how to remove individual parts in the proper sequence. Cleanliness is emphasized throughout the disassembly process.
This service repair manual provides instructions for disassembling the power shift transmission of 924G and 924Gz wheel loaders. The disassembly procedure involves 71 steps to remove components like the torque converter, clutch groups, gears, shafts, seals, and bearings. Various tools are required, and cleanliness is important to prevent dirt from entering during reassembly. Detailed illustrations accompany each step to show how to properly disassemble the transmission.
The document provides disassembly instructions for the power shift transmission of 924G and 924Gz wheel loaders. It lists 57 steps to fully disassemble the transmission along with required tools. Key components that are disassembled include the torque converter, gear assemblies, clutch groups, seals, bearings, and plates/discs. Detailed illustrations accompany each step to show how to remove individual parts in the proper sequence. Cleanliness is emphasized throughout to prevent dirt from entering internal mechanisms during disassembly.
This service repair manual provides instructions for disassembling the power shift transmission of 924G and 924Gz wheel loaders. The disassembly procedure involves 71 steps to remove components like the torque converter, clutch groups, gears, shafts, seals, and bearings. Various tools are required, and cleanliness is important to prevent dirt from entering during reassembly. Detailed illustrations accompany each step to show how components connect and disassemble.
Caterpillar Cat 924G and 924Gz Wheel Loader (Prefix 3DZ) Service Repair Manua...9fiisekodkdmd
This document provides disassembly instructions for the power shift transmission of a 924G and 924Gz wheel loader. It lists 70 steps to fully disassemble the transmission, removing components like gears, clutches, seals, bearings and shafts. Special tools are required for tasks like compressing springs and pulling components. Cleanliness is emphasized throughout to prevent dirt from entering the transmission during disassembly.
This service repair manual provides instructions for disassembling the power shift transmission of a 924G or 924Gz wheel loader. It lists 70 steps to fully disassemble the transmission, removing components like gears, clutches, seals, bearings and shafts. Pictures and exploded diagrams accompany each step to illustrate the proper procedure. Cleaning is important during disassembly to prevent dirt from entering internal mechanisms.
This service repair manual provides instructions for disassembling the power shift transmission on Caterpillar 924G and 924Gz wheel loaders. It outlines 59 steps to fully disassemble the transmission, including removing individual gears, clutches, seals, and other components. Required tools are listed. Detailed illustrations accompany each step to show how to remove specific parts in the correct order. Cleanliness is emphasized during disassembly to prevent dirt from entering internal mechanisms.
This document provides disassembly instructions for the power shift transmission of a 924G and 924Gz wheel loader. It lists 70 steps to fully disassemble the transmission, removing components like gears, clutches, seals, bearings and shafts. Special tools are required for tasks like compressing springs and pulling components. Cleanliness is emphasized throughout to prevent dirt from entering the transmission during disassembly.
Caterpillar Cat 924G and 924Gz Wheel Loader (Prefix 3DZ) Service Repair Manua...9fikslkddmd8u
This document provides instructions for disassembling the power shift transmission on Caterpillar 924G and 924Gz wheel loaders. The summary is as follows:
1) Place the transmission on a repair stand and remove components like the torque converter, top case, selector valve, and flex plate.
2) Remove gears, bearings, seals, and clutch groups including the forward low and high, reverse second, and first third gear clutches.
3) Clean parts and inspect them for wear during disassembly. Take note of order and numbers of plates and discs for reassembly.
This document provides disassembly instructions for the power shift transmission of Caterpillar 924G and 924Gz wheel loaders. It describes 59 steps to fully disassemble the transmission, including removing the top case, torque converter, gears, bearings, seals, and individual clutch groups like the forward low and high clutches, reverse second gear clutch, and first third gear clutch. Precautions are given to clean components thoroughly and note part orders for reassembly. Required specialty tools are listed.
This document provides instructions for disassembling the power shift transmission of a 924G and 924Gz wheel loader. It outlines 59 steps to fully disassemble the transmission, including removing the top case, torque converter, gears, bearings, seals, and individual clutch groups like the forward low and high clutches, reverse second gear clutch, and first third gear clutch. Tools required are listed. Cleanliness is emphasized when disassembling to prevent dirt entry.
Similar to Caterpillar Cat 924G Wheel Loader (Prefix RBB) Service Repair Manual (RBB00001 and up).pdf (18)
This document provides instructions for disassembling the components of a 988K wheel loader torque converter. It lists over 60 individual steps to remove parts like the housing assembly, shaft assembly, carrier assembly, impeller, piston, seals, bearings, and other internal components. Detailed illustrations accompany each step. Special tools are required to separate certain components, and safety precautions are noted due to the heavy weight of assemblies that need to be lifted out.
This document provides disassembly instructions for a 986H wheel loader transmission planetary system in 3 sentences or less:
The document outlines 75 steps to disassemble the transmission planetary system, removing components like planetary gears, clutch housings, pistons, seals, and other parts. Tools required include a transmission repair stand, eyebolts, clamps, retaining ring pliers, external pliers, drivers, and other specialized tools to aid in disassembly. Cleanliness is emphasized as dirt could enter the transmission during disassembly.
This document provides disassembly instructions for the transmission planetary of a 986H wheel loader. It outlines 59 steps to fully disassemble the transmission, including removing planetary gears, clutch housings, pistons, seals, gears, and other components. Tools required include a transmission repair stand, eyebolts, clamps, retaining ring pliers, external pliers, drivers, and slide hammers. Detailed illustrations accompany each step. Safety precautions are provided to prevent injury from released spring forces.
This document provides assembly instructions for a torque converter in a 982M wheel loader. It outlines 51 steps to assemble the internal components of the torque converter and attach it to the transmission and output transfer gears. The instructions include installing seals, bearings, gears, plates, springs, and bolts. Tolerances and torque specifications are provided. The final step is to connect the assembled torque converter to the transmission and output transfer gears.
This service repair manual provides instructions for assembling the lock up clutch and freewheel stator for the torque converter in a 982M Wheel Loader. It outlines 51 steps requiring various tools to install seals, bearings, gears, plates, and bolts in the specified order and torque. The process connects the assembled torque converter to the transmission and output transfer gears.
The document provides instructions for assembling and disassembling components of a 982M wheel loader transmission powered by a C13 engine. It describes 51 steps to assemble the torque converter lock up clutch and freewheel stator. It also describes 5 steps to separate the transmission from the output transfer gears, including removing bolts, harnesses, tubes, and solenoids. Tools including levers, links, and stands are required. Weights of components are provided.
This document provides disassembly and assembly instructions for the torque converter of a 982M wheel loader. It details 46 steps to disassemble components such as the torque converter housing, pump adapter, gears, bearings and seals. It then lists 45 steps for assembly, installing components in reverse order and noting specific details like orientation and lubrication of parts. Tools required are listed in a table.
1. The document provides disassembly and assembly instructions for the lock up clutch and freewheel stator of a 980M wheel loader torque converter.
2. It lists 46 steps to disassemble components and 45 steps to reassemble them, including the use of various tools.
3. The components include housing, gears, seals, bearings, plates, disks, and more that make up the internal workings of the torque converter and transmission.
The document provides instructions for assembling a torque converter and connecting it to a transmission. It lists 51 steps for installing various components like seals, bearings, gears, and housing pieces. It also describes using specialty tools and proper torque specifications. Finally, it explains how to separate the transmission from the output transfer gears by removing bolts, disconnecting lines, and lifting components with brackets.
This service repair manual provides instructions for assembling the lock up clutch and freewheel stator for the torque converter in a 980M wheel loader. It outlines 51 steps to install various components like seals, bearings, gears, and housings. Finally, it specifies connecting the assembled torque converter to the transmission and output transfer gears.
This document provides assembly instructions for a torque converter in 3 steps:
1. It describes 51 assembly steps to install various components like seals, bearings, gears, and housings onto the torque converter.
2. It instructs to connect the assembled torque converter to the transmission and output transfer gears.
3. It lists the required tools and provides illustrations for each assembly step.
This document provides assembly instructions for a piston pump on a 980L wheel loader. It describes installing various components like bearings, seals, retainers and pistons. It also provides steps to determine proper shim thickness and clearance between parts. The goal is to assemble the pump with specified end play, sliding block play and timing between components.
The document provides step-by-step instructions for assembling a torque converter for a 980M wheel loader. It details 51 steps for installing various components like seals, bearings, gears, and housings. Proper tools and torque specifications are listed to ensure correct assembly.
This document provides disassembly instructions for the planetary transmission of a 972H wheel loader. It lists 50 steps to fully disassemble the transmission, including removing gears, shafts, housings, seals, and other internal components. Detailed illustrations accompany each step to show how to properly disassemble the transmission in the correct order. Safety precautions are provided to warn of potential spring hazards during disassembly.
This document provides disassembly instructions for a 992K wheel loader torque converter. It lists over 50 individual steps to disassemble the various components of the torque converter housing assembly, including removing pumps, gears, seals, bearings, and other internal parts. Detailed illustrations accompany each step to show how to position the assembly, what tools are needed, and how to separate the individual components. The overall process involves disassembling the entire torque converter and transmission housing to access all internal parts.
This document provides instructions for disassembling the components of a 992K wheel loader torque converter. It describes removing over 20 individual parts in multiple steps, including the torque converter, modulating valves, pumps, gears, housings, clutches and bearings. Cleanliness is emphasized throughout to prevent contamination. Various tools are required and safety precautions mentioned due to components weighing up to 680kg.
This document provides instructions for disassembling the transmission and torque converter of a 924G or 924Gz wheel loader. It lists the required tools and gives step-by-step instructions to remove components such as gears, seals, plates, discs, bearings, and clutches. Safety precautions are provided for releasing clutch springs. The disassembly process is described in detail through 50 steps and accompanied by illustrations of each step.
The document provides instructions for disassembling and assembling the vane pump used in the steering system of a 657G Wheel Scraper. It describes in detail removing each individual component of the pump including housing, seals, cartridge, rotor, vanes and shaft. Fifteen detailed steps are outlined for disassembly, requiring basic tools like retaining ring pliers and a bearing puller. Similarly, sixteen steps are provided for reassembling the pump and installing it back into the steering system. Proper cleaning and lubrication of parts is emphasized to prevent contamination.
This document provides instructions for disassembling a torque converter for a 988K wheel loader. It lists over 60 individual steps to remove components such as housing assemblies, shafts, bearings, seals, gears, and plates. Special tools are required for tasks like separating housings and pulling components. Precautions include using lifting devices and cribbing due to component weights up to 545 kg. Detailed illustrations accompany each step.
This service repair manual provides instructions for disassembling a 988H wheel loader torque converter. It lists 72 steps and required tools to remove all components of the torque converter. Key parts that are dismantled include the housing assembly, carrier assembly, turbine, impeller, stator, shafts, gears, seals, and bearings. Detailed illustrations accompany each step to show how to properly disassemble the torque converter.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 924G WHEEL LOADER RBB
Configuration: 924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engine
Disassembly and Assembly
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Power
Train
Media Number -RENR6422-07 Publication Date -01/10/2017 Date Updated -09/10/2017
i02247494
Transmission and Torque Converter - Disassemble
SMCS - 3001-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 180-3033 Repair Stand Set 1
C 138-7574 Link Bracket 2
D 4C-6136 Lifting Bracket 1
E 4C-6399 Compressor Assembly (Clutch Spring) 1
F FT-2343 Plexiglass Cover 1
G 1P-2321 Combination Puller 1
H 4C-3652 Compressor Assembly (Clutch Spring) 1
Start By:
a. Remove the transmission. Refer to Disassembly and Assembly, "Transmission and Torque
Converter - Remove".
Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the
exterior of the components should be thoroughly cleaned. This will help to prevent dirt from
entering the internal mechanism.
1/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engi...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00653680
1. Use Tooling (C) and a suitable lifting device in order to position transmission (2) on
Tooling (A) and (B), as shown. The weight of transmission (2) is approximately 500 kg
(1100 lb).
2. Remove torque converter (1).
Illustration 2 g00671890
3. Remove bolts (3) and flex plate (4) from torque converter (1).
Illustration 3 g01005185
2/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engi...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 4. Disconnect harness assembly (4A) from the valve assembly.
Illustration 4 g01005186
Note: Mark each valve group for installation purposes.
5. Remove bolts (4B) and remove valve assembly (4C).
6. Repeat Step 5 for the remaining valve assemblies.
Illustration 5 g01005187
7. Remove bolts (4D) from the relief valve. Remove bolts (4E) and remove the manifold
assembly.
3/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engi...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 6 g00653775
8. Remove bolts (5) and plate (6).
Illustration 7 g00653801
9. Remove lip seal (7) and seal (8).
Illustration 8 g00653806
10. Remove bolts (9).
4/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engi...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 12 g00653858
15. Using Tooling (D) to remove the forward low and the forward high clutch group (15). The
weight of the forward low and the forward high clutch group (15) is approximately 27 kg
(60 lb).
Note: When the clutch groups are disassembled, remove shaft plugs (16) in order to clean
the oil passages. Use a punch to drive the plug into the shaft . Drill the remainder of the
aluminum plug out of the bore. Be careful not to drill any portion of the walls of the bore.
Use shop air or a cleaning solution in order to clean the shafts.
Illustration 13 g00653893
16. Remove retaining ring (17) and washer (18).
6/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engi...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g00653932
17. Remove retaining ring (19).
18. Use a suitable press in order to remove gear (20).
Illustration 15 g00890607
19. Remove retaining ring (22). Remove hub (21). Remove plates and discs (23).
Note: Take note of the number and order of plates and discs for assembly purposes.
Illustration 16 g00653959
20. Remove washer (24).
Note: The retainer may stick to the inside of hub (21) when the hub is removed.
7/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engi...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 17 g00890608
21. Remove retaining ring (26). Press bearing (25) from hub (22).
Illustration 18 g00654018
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
22. Put the forward low clutch group in a suitable press. Use Tooling (H) in order to compress
the spring. Remove retaining ring (27).
8/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engi...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 19 g00654029
23. Remove retainer (28) and spring (29).
Illustration 20 g00890609
24. Blow shop air 276 kPa to 414 kPa (40 psi to 60 psi) into lube passage (31) in order to
remove piston (32).
25. Remove seals (30).
Illustration 21 g00654063
26. Remove O-ring seals (33).
9/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engi...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 22 g00654078
27. Disassemble the forward high clutch group by removing retaining ring (34). Remove
washer (35).
Illustration 23 g00654253
28. Remove ring (36). Remove gear (37).
Illustration 24 g00654261
29. Remove hub (38).
10/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 25 g00654263
30. Remove retaining ring (39). Use a suitable press in order to remove bearing (40).
Illustration 26 g00654274
31. Remove washer (41). Remove retaining ring (42). Remove the plate and discs (43).
Note: Take note of the number and order of plates and discs for assembly purposes.
Illustration 27 g00654276
11/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
32. Put the forward high clutch group in a suitable press. Use Tooling (H) in order to remove
retaining ring (44).
Illustration 28 g00654280
Illustration 29 g00654282
33. Remove retainer (45) and spring (46).
34. Blow shop air 276 kPa to 414 kPa (40 psi to 60 psi) into lube passage (48) in order to
remove piston (47).
12/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 30 g00654292
35. Remove O-ring seals (49) and (50).
Illustration 31 g00654301
36. Use Tooling (D) in order to remove reverse second gear clutch group (51). The weight of
reverse second gear clutch group (51) is approximately 32 kg (70 lb).
Illustration 32 g00654339
37. Remove retaining ring (52) and washer (53).
13/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 33 g00654328
38. Remove retaining ring (54) and gear (55).
Illustration 34 g00654347
39. Remove hub assembly (56).
Illustration 35 g00890610
40. Remove washer (58).
41. Remove retaining ring (57). Remove plates and discs (59).
Note: Take note of the number and order of the plates and discs for assembly purposes.
14/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 36 g00890611
42. Remove retaining ring (60). Use a suitable press in order to remove bearing (61).
Illustration 37 g00654360
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
43. Put the reverse clutch group in a suitable press. Use Tooling (H) in order to remove
retaining ring (62).
15/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 38 g00654364
44. Remove retainer (63) and spring (64).
Illustration 39 g00654372
Illustration 40 g00654378
45. Blow shop air 276 kPa to 414 kPa (40 psi to 60 psi) into lube passage (66) in order to
remove piston (65).
46. Remove seals (67).
16/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 41 g00654403
47. Remove O-ring seals (68) and (69).
Illustration 42 g00890612
48. Install a suitable puller under gear (72). Pull gear (72), spacer (70), and bearing cone (71).
49. Remove spacer (73). Remove washer (74) and (75).
Note: Use Steps 38 through 47 for the remaining disassembly of the second gear clutch
group. In Step 43, use Tooling (E) instead of Tooling (H).
Illustration 43 g00654494
17/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 50. Use Tooling (D) in order to remove first third gear clutch group (76). The weight of first
third gear clutch group (76) is approximately 50 kg (110 lb).
Illustration 44 g00654497
51. Remove retaining ring (77) and washer (78).
Illustration 45 g00654507
52. Remove retaining ring (79) and gear (80).
Illustration 46 g00654512
53. Remove hub assembly (81).
18/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 47 g00890613
54. Remove retaining ring (82). Use a suitable press in order to remove bearing (83).
Illustration 48 g00654519
55. Remove washer (84).
56. Remove retaining ring (85). Remove plates and discs (86).
Note: Take note of the number and order of the plates and discs for assembly purposes.
Illustration 49 g00654525
19/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
57. Put the third gear clutch group in a suitable press. Use Tooling (H) in order to remove ring
(87).
Illustration 50 g00654534
58. Remove retainer (88) and spring (89).
Illustration 51 g00890615
59. Blow shop air 276 kPa to 414 kPa (40 psi to 60 psi) into lube passage (91) in order to
remove piston (90).
60. Remove seals (92).
20/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 52 g00654638
61. Remove O-ring seals (93) and (94).
Illustration 53 g00890617
62. Disassemble the first gear clutch by installing Tooling (G) through the holes in gear (95).
Pull gear (95), washer (96), and bearing (97) together.
Illustration 54 g00654719
63. Remove washer (98). Remove retaining ring (99) and gear (100).
21/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 55 g00654724
64. Remove hub assembly (101).
Illustration 56 g00890619
65. Remove washers (102) and (104). Remove retaining ring (103). Remove plates and discs
(105).
Note: Take note of the number and order of the plates and discs for assembly purposes.
Illustration 57 g00654818
66. Remove ring (106).
22/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 58 g00654824
67. Remove bearing assembly (107).
Illustration 59 g00654833
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
68. Put the clutch group in a suitable press. Use Tooling (H) in order to remove retaining ring
(108).
23/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 60 g00654837
69. Remove the retainer and seal assembly (109).
Illustration 61 g00654842
70. Remove spring (110).
Illustration 62 g00654966
71. Blow shop air 276 kPa to 414 kPa (40 psi to 60 psi) into the lube passage in order to remove
piston (111).
24/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 63 g00654969
72. Remove seals (112), (113), and (114).
Illustration 64 g00655016
73. Remove input shaft assembly (115).
Illustration 65 g00890621
74. Remove carrier (117) and seal (116). Remove bearing cone (121) and gear (120).
75. Remove bearing cone (118) and gear (119).
25/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 66 g00655110
76. Remove bearing (122) and bearing cups (123).
Illustration 67 g00655120
77. Remove bolt (124), washer (125), and yoke (126).
Illustration 68 g00685060
78. Remove the bolt and washer (127).
26/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Illustration 72 g00655189
83. Install bolts (136). Tighten bolts (136) in order to remove cage (137). Remove the shims
that are under the cover.
Illustration 73 g01005236
84. Remove seal (138). Remove bearing cup (139) and lip seal (140).
Illustration 74 g01005238
85. Remove the output shaft and gear (141).
28/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
30. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
31. Illustration 75 g01005239
86. Remove bolts (142) and shield assembly (144).
87. Remove bearing cup (143) and lip seal (145).
Illustration 76 g01005241
88. Remove bearing cone (146) from the output shaft.
Illustration 77 g01005243
89. Remove bearing cone (147). Remove retaining ring (148) and gear (149).
29/30
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E E...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
32. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 924G WHEEL LOADER RBB
Configuration: 924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engine
Disassembly and Assembly
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Power
Train
Media Number -RENR6422-07 Publication Date -01/10/2017 Date Updated -09/10/2017
i06103589
Transmission and Torque Converter - Assemble
SMCS - 3001-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 180-3033 Repair Stand Set 1
C 138-7574 Link Bracket 2
D 4C-6136 Lifting Bracket 1
E 4C-6399 Compressor Assembly (Clutch Spring) 1
F FT-2343 Plexiglass Cover 1
H 4C-3652 Compressor Assembly (Clutch Spring) 1
J 4C-6402 Expander Tool Gp 1
K
4C-6137 Bearing Installer 1
4C-6142 Spacer 1
1P-0531 Handle 1
L 5P-3413 Pipe Sealant 1
M 9S-3263 Thread Lock Compound 1
N 1U-8846 Gasket Sealant 1
1/35
924G 924Gz Wheel Loader RBB00001-UP (MACHINE) POWERED BY 3056E Engi...
2021/1/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...