This document provides disassembly instructions for the output transfer gears of a 740C Ejector Articulated Truck. It outlines 41 steps to fully disassemble the output transfer gears, including removing components like the cover, tubes, gears, bearings, seals, and other internal parts. Special tools are required to remove some components, and weights are provided for heavy parts to assist with safe removal. Disassembly is to be performed in a contained area to collect fluids, and clean surfaces where parts will be reinstalled.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
2. Shutdown SIS
Previous Screen
Product: ARTICULATED TRUCK
Model: 740C ARTICULATED TRUCK LFN
Configuration: 740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 Engine
Disassembly and Assembly
735C, 740C EJECTOR and 745C Articulated Trucks Power Train
Media Number -UENR4227-04 Publication Date -01/09/2015 Date Updated -02/07/2018
i07142939
Output Transfer Gears - Disassemble
SMCS - 3159-015-OJ
Disassembly Procedure
Table 1
Required Tooling
Tool Part Number Part Description Qty
A 1P-2322 Combination Puller 1
B
1H-3107 Push-Puller Tool Gp 1
5F-7343 Bearing Puller Gp 1
C 1P-0520 Driver Gp 1
D 8T-0644 Bolt(1)
3
E 6V-5696 Bolt 2
F 422-5473 Lifting Eye Assembly 2
(1)
Cut off the threaded ends of Bolts (D).
Start By:
a. Remove the output transfer gears.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
1/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 En...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Personal injury or death can result from improper lifting or blocking.
When a hoist or jack is used to lift any part or component, stand clear of
the area. Be sure the hoist or jack has the correct capacity to lift a
component. Install blocks or stands before performance of any work
under a heavy component.
Approximate weights of the components are shown. Clean all surfaces
where parts are to be installed.
Note: Exercise caution when you handle the case and the covers for the output transfer gears. The
case and the covers are aluminum, therefore more susceptible to damage during handling. Avoid
using lifting eyes, chains, and tooling, that directly contact the sealing surfaces.
1. Drain the oil from the output transfer gears into a suitable container.
Illustration 1 g03842407
2. Position output transfer gears (1) on suitable cribbing. The weight of output transfer gears
(1) is approximately 363 kg (800 lb).
2/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 En...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 2 g06235277
3. Remove bolt (2), retainer plate (3), O-ring seal (4), and yoke (5). Remove wear seal (5a)
from yoke (5).
Illustration 3 g03842485
4. Remove bolt (6), washer (7), O-ring seal (7a), plate (8), O-ring seal (9), and yoke (10).
Remove wear seal (10a) from yoke (10). Remove lip seal (10b).
3/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 En...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Illustration 4 g03842503
5. Remove bolts (11), manifold (12), and gasket (12a).
Illustration 5 g03842515
(12) manifold
Note: Do not remove carrier (20) from manifold (12). Carrier (20) is shown only for
reference. Carrier (20) is not serviceable.
6. Remove plug (13) and O-ring seal (15). Remove plug (14) and O-ring seal (16).
7. Remove bolts (17), solenoid valve (18), and the O-ring seals. Remove check valve (19) and
the O-ring seals.
8. Remove seals rings (21) from carrier (20).
4/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 En...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. 11. Remove clip (25a). Remove bolts (24). Use two people or a suitable lifting device to
remove cover (25). The weight of cover (25) is approximate 34 kg (75 lb). Remove the
gasket for cover (25).
Illustration 9 g03844527
12. Remove screws (28) from the underside of cover (25). Remove screw (28a). Remove tube
assembly (26) and O-ring seal (27). Remove P-clip (28b) from tube assembly (26).
Illustration 10 g03844528
13. Remove bearing cup (29), bearing cone (30), bearing cone (33), and bearing cup (35).
Remove O-ring seals (38a)
14. Remove lip seal (32). Remove bearing cup (38).
15. Remove plug (31) and O-ring seal (34). Remove setscrew (36) and setscrew (37).
6/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 En...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 11 g03845170
16. Remove transfer gear (39).
Illustration 12 g03845641
17. Use Tooling (A) to remove bearing cone (40) from transfer gear (39).
18. Use Tooling (B) bearing cone (41).
7/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 En...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 15 g03846519
Note: Do not remove carrier (49). Carrier (49) is shown only for reference. Carrier (49) is
not serviceable.
21. Remove shims (46) and bearing cup (50) from cage (44). Remove O-ring seal (48) and plug
(47) from carrier (49). Remove O-ring seals (51).
Illustration 16 g03846522
22. Remove bolt (56) and yoke (54). Remove O-ring seal (55) and O-ring seal (52). Remove
wear seal (53).
9/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 En...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Illustration 17 g03846881
23. Attach Tooling (F) and a suitable lifting device to threaded holes (58a) in differential group
(57). The weight of differential group (57) is approximately 133 kg (293 lb). Remove bolt
(58). Remove differential group (57).
Illustration 18 g03846900
24. Remove retainer plate (59). Remove shims (60). Remove bolts (61).
10/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 ...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Illustration 19 g03846960
25. Remove bearing cone (61). Remove clutch housing (62). Remove piston (63). Remove seal
ring (64) and ring seal (65).
Illustration 20 g03847099
Note: As you remove discs (66) and friction discs (67), take note of the order of discs (66)
and friction discs (67) for assembly purposes.
26. Remove discs (66) and friction discs (67). Remove spacer (68).
Illustration 21 g03847882
27. Remove hub assembly (70). Remove seal ring (69) and seal ring (71).
11/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 ...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Illustration 22 g03847883
28. Remove gear (72). The weight of gear (71) is approximately 23 kg (51 lb).
Illustration 23 g03847888
Illustration 24 g03862659
12/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 ...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. 29. Place gear (72) in a suitable press. Use Tooling (D), Tooling (C), and a suitable press to
remove bearing cone (73) from gear (72).
30. Remove Tooling (C) and Tooling (D). Remove gear (72) from the suitable press.
Illustration 25 g03849151
31. Turn over gear (72). The weight of gear (72) is approximately 23 kg (51 lb).
32. Remove retaining ring (74), thrust washer (75), and bearing (76). Remove seal ring (77).
Illustration 26 g03849122
33. Remove thrust washer (78) from gear (72).
13/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 ...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Illustration 27 g03849124
34. Remove shaft assembly (79) from transfer gear (80). Use a suitable lifting device to turn
over transfer gear (80). The weight of transfer gear (80) is approximately 59 kg (130 lb).
Illustration 28 g03849125
35. Remove retaining ring (81).
36. Install Tooling (E) in ring gear (84). Evenly rotate Tooling (E) clockwise in order to move
spacer (82) and bearing cup (83) away from ring gear (84). As a unit, remove spacer (82)
and bearing cup (83) from transfer gear (80).
14/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 ...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 29 g03849126
37. Remove dowel (85). Use Tooling (E) to assist with the removal of ring gear (84).
Illustration 30 g03849127
38. Remove planet carrier (86) from transfer gear (80).
Illustration 31 g03850044
15/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 ...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. Illustration 32 g03850045
39. Drive spring pin (87b) into planet carrier (86) in order to remove shaft assembly (87).
Remove planet gear (88) from planet carrier (86).
40. Remove thrust disc (89) and thrust disc (91). Remove roller bearings (90) from planet gear
(88). Repeat Step 39 and Step 40 for remaining planet gears (88).
Illustration 33 g03864344
41. Remove bearing cup (91a). Remove spacer (91b) from transfer gear (80).
16/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 ...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Illustration 34 g03850046
Note: Do not remove sleeve (92) unless you need to replace sleeve (92). Sleeve (92) will be
damaged during removal.
42. Inspect sleeve (92) for damage. If necessary, remove sleeve (92) from shaft assembly (79).
Remove bearing cone (93). Remove bearing race (94).
Illustration 35 g03850048
17/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 ...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Illustration 36 g03850050
Note: Plate (96) is not reusable. You will have to replace plate (96) with a new part.
43. Remove plugs (97a). Remove screws (95). Use a suitable hammer and a suitable punch to
remove plate (96). Remove roller bearing (97). Remove lip seal (98).
44. Remove bolts (99) and the washers. Remove cage assembly (100).
Illustration 37 g03852043
Note: Plate (102) is not reusable. You will have to replace plate (102) with a new part.
45. If necessary, remove screws (101) and plate (102). Remove seal ring carrier (103). Remove
seal ring (104). Remove O-ring seal (105).
Illustration 38 g03852045
46. Remove O-ring seal (107). Remove shims (106).
18/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 ...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. Illustration 39 g03852201
47. Remove transfer gear (108). The weight of transfer gear (108) is approximately 68 kg
(150 lb).
Illustration 40 g03852205
48. Remove bearing cone (109) and bearing cone (110) from transfer gear (108).
Illustration 41 g03852500
Note: Plate (112) is not reusable. You will have to replace plate (112) with a new part.
19/20740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 ...
2020/1/8https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...