Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
2. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 432D BACKHOE LOADER WEP
Configuration: 432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
3054C Engines for Caterpillar Built Machines
Media Number -SENR5069-18 Publication Date -01/05/2015 Date Updated -19/09/2018
i02293092
Engine Oil Cooler - Remove
SMCS - 1378-011
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1. Drain the coolant from the engine oil cooler into a suitable container. Drain the engine oil
from the engine oil cooler into a suitable container. Refer to Operation and Maintenance
Manual for the procedure on draining the engine coolant and the engine oil.
1/2
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Note: Refer to Operation and Maintenance Manual, "Refill Capacities" for the coolant
capacity and the engine oil capacity of the engine.
Illustration 1 g00952614
2. Remove the setscrews (6). Remove the setscrews (4).
Note: Do not remove the setscrews (7) at this time.
3. Remove the housing for the engine oil cooler (3) from the cylinder block.
4. Remove the setscrews (7). Remove the engine oil cooler (2) and the seals (5) from the
housing for the engine oil cooler (3). Discard the seals (5).
5. Remove the gasket (1) from the housing for the engine oil cooler and the cylinder block.
Discard the gasket (1).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 23:02:37 UTC+0800 2019
2/2
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 432D BACKHOE LOADER WEP
Configuration: 432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
3054C Engines for Caterpillar Built Machines
Media Number -SENR5069-18 Publication Date -01/05/2015 Date Updated -19/09/2018
i02293093
Engine Oil Cooler - Install
SMCS - 1378-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Clean the mating surfaces of the housing for the engine oil cooler and the cylinder block.
1/2
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 1 g00952614
2. Position the engine oil cooler (2) and new seals (5) on the housing for the engine oil cooler.
Install the setscrews (7) in order to secure the engine oil cooler to the housing.
Note: Do not use sealants on the gasket (1).
3. Position the housing for the engine oil cooler (3) and a new gasket (1) on the cylinder block.
Install the setscrews (4) and the setscrews (6) in order to secure the housing for the engine
oil cooler to the cylinder block.
4. Tighten all of the setscrews (4, 6 and 7) to the correct torque. Refer to the Torque
specifications Manual, "Standard Torques for Metric Fasteners" for further information.
Note: Refer to Operation and Maintenance Manual, "Refill Capacities" for the cooling
system capacity and the lubrication system capacity of the engine.
5. Fill the cooling system with coolant. Fill the lubrication system with engine oil.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 23:03:33 UTC+0800 2019
2/2
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 432D BACKHOE LOADER WEP
Configuration: 432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
3054C Engines for Caterpillar Built Machines
Media Number -SENR5069-18 Publication Date -01/05/2015 Date Updated -19/09/2018
i02317428
Engine Oil Relief Valve - Remove and Install - Engine
without Balancer Group
SMCS - 1315-010
Removal Procedure
Start By:
a. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove
and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/3
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 1 g00959674
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Remove plug (2). Remove spring (3) and plunger (4) from engine oil pump assembly (1).
2. Check the spring and the plunger for wear or for other damage. The plunger (4) must slide
easily in the engine oil pump assembly.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Clean the spring and the plunger of the engine oil relief valve. Lubricate the spring and the
plunger with clean engine oil.
2/3
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 2 g00959674
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
2. Install plunger (4) and spring (3) in engine oil pump assembly (1).
3. Install plug (2). Tighten the plug to a torque of 22 N·m (16 lb ft).
End By:
a. Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove
and Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 23:04:29 UTC+0800 2019
3/3
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 432D BACKHOE LOADER WEP
Configuration: 432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
3054C Engines for Caterpillar Built Machines
Media Number -SENR5069-18 Publication Date -01/05/2015 Date Updated -19/09/2018
i02293101
Engine Oil Pump - Remove - Engines Without a Balancer
SMCS - 1304-011
Removal Procedure
Start By:
a. Remove the oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and
Install".
Note: This procedure is for the removal of the engine oil pump on engines that are not equipped
with a balancer. Refer to this Disassembly and Assembly Manual, "Balancer Group - Remove" for
information on the removal of the engine oil pump on engines that are equipped with a balancer.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/3
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01147907
1. Remove the setscrews (3) and the suction pipe (4).
2. Remove the setscrews (1). Remove the assembly of the engine oil pump (2) from the
cylinder block.
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
3. If necessary, remove the pressure relief valve (5) from the assembly of the engine oil pump
(4). Refer to this Disassembly and Assembly Manual, "Engine Oil Relief Valve - Remove
and Install".
2/3
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 2 g00956631
4. Remove the setscrews (8). Remove engine oil pump (9).
5. If necessary, remove the setscrews and remove the front cover assembly from the engine oil
pump (7) in order to inspect the components within the engine oil pump.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 23:05:24 UTC+0800 2019
3/3
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 432D BACKHOE LOADER WEP
Configuration: 432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
3054C Engines for Caterpillar Built Machines
Media Number -SENR5069-18 Publication Date -01/05/2015 Date Updated -19/09/2018
i02293102
Engine Oil Pump - Install - Engines Without a Balancer
SMCS - 1304-012
Installation Procedure
Note: This procedure is for the installation of the engine oil pump on engines that are not
equipped with a balancer. Refer to this Disassembly and Assembly Manual, "Balancer Group -
Install" for information on the installation of the engine oil pump on engines that are equipped
with a balancer.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
If any of the parts on the engine oil pump are worn or damaged, the
entire pump must be replaced.
1. Clean all of the internal components of the oil pump if the front cover of the oil pump was
previously removed in order to inspect the internal components. Check the internal
components for wear and for other damage. Check the clearance between the outer rotor of
the oil pump and the oil pump body. Check the clearance between the outer rotor and the
inner rotor. Check the end play movement of the rotor. Refer to the Systems
Operation/Testing and Adjusting Manual, "Engine Oil Pump - Inspect". Replace the engine
oil pump if any of the components are worn or damaged.
1/3
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 2. Lubricate the inner rotor and the outer rotor of the engine oil pump with clean engine
lubricating oil. Install the front cover of the engine oil pump onto the body of the oil pump.
Install the setscrews and tighten the setscrews in order to secure the front cover to the body.
Illustration 1 g00956778
3. Install the engine oil pump (9) into the assembly of the engine oil pump (2). Install the
setscrews (8). Tighten the setscrews to a torque of 9 N·m (80 lb in).
4. Fill engine oil pump (9) with clean engine oil.
5. Position the assembly of the engine oil pump (2) against the cylinder block. Ensure that
dowel pin (10) and hollow dowel (11) are correctly located in the cylinder block.
6. Install the setscrews (1). Tighten the setscrews to a torque of 44 N·m (32 lb ft).
7. Check the backlash between the idler gear of the oil pump and the crankshaft gear. Refer to
the Specifications Manual, "Gear Group - Front" for further information.
2/3
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 2 g01147909
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
8. If the pressure relief valve (5) was removed, install the pressure relief valve. Refer to this
Disassembly and Assembly Manual, "Engine Oil Relief Valve - Remove and Install" for
further information.
9. Position the suction pipe (4) and install the setscrews (3).
End By:
a. Install the oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and
Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 23:06:20 UTC+0800 2019
3/3
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 432D BACKHOE LOADER WEP
Configuration: 432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
3054C Engines for Caterpillar Built Machines
Media Number -SENR5069-18 Publication Date -01/05/2015 Date Updated -19/09/2018
i02293115
Water Pump - Remove and Install
SMCS - 1361-011; 1361-012
Removal Procedure
Start By:
a. Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1/4
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 1. Drain the coolant from the cooling system into a suitable container for storage or disposal.
Note: Refer to Operation and Maintenance Manual, "Refill Capacities" for the coolant
capacity of the engine.
2. Loosen the clamps and remove the hose from the water pump inlet.
Illustration 1 g00952695
3. Remove the setscrews (3) that fasten the water pump (4) to the front housing (1).
4. If necessary, tap the water pump with a soft hammer in order to loosen the water pump.
5. Remove water pump (4). Remove the gasket (2) from the front housing and the water pump.
Discard the gasket (2).
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-3263 Thread Lock -
B -
Guide Bolt
(M8 X 1.25 by 70 mm)
2
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/4
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. 1. Inspect the drive gear for the water pump for wear or other damage. If necessary, replace the
drive gear.
2. Clean the joint faces of the water pump and the front housing.
Note: Do not use sealant on the gasket for the water pump.
Illustration 2 g00952716
3. Install Tooling (B) in the front housing (1).
4. Install a new gasket (2) on the front housing.
3/4
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 3 g00952731
5. Install the water pump (4) on the front housing.
Note: New setscrews have sealant on the first 13 mm (0.5 inch) of the threads. In order to
reuse the old setscrews, clean the old sealant from the setscrews and apply Tooling (A) to
the setscrews.
6. Install the setscrews (3) that fasten the water pump to the front housing. Do not tighten the
setscrews at this time.
7. Remove Tooling (B) and install the remaining setscrews in order to secure the water pump
to the front housing.
Note: Tighten the setscrews evenly in order to pull the water pump into the front housing.
8. Tighten the setscrews (3) to a torque of 22 N·m (16 lb ft). Tighten the setscrews in the
sequence that is shown in Illustration 3.
9. Install the hose to the water pump inlet. Tighten the hose clamps.
10. Fill the cooling system with coolant. Refer to Operation and Maintenance, "Refill
Capacities" for the cooling system capacity.
End By:
a. Install the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 23:07:16 UTC+0800 2019
4/4
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 432D BACKHOE LOADER WEP
Configuration: 432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
3054C Engines for Caterpillar Built Machines
Media Number -SENR5069-18 Publication Date -01/05/2015 Date Updated -19/09/2018
i02293128
Water Temperature Regulator - Remove and Install
SMCS - 1355-010
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1. Drain the coolant from the cooling system to a level below the water temperature regulator
into a suitable container for storage or disposal.
1/3
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. 2. Loosen the hose clamp from the upper radiator hose and remove the upper radiator hose
from the water temperature regulator housing.
Illustration 1 g00953937
3. Remove the setscrews (2) that hold the water temperature regulator housing (1) in position
on the cylinder head. Remove the water temperature regulator housing. Remove the O-ring
seal from the water temperature regulator housing. Discard the O-ring.
4. Squeeze the retainers (A) and rotate the water temperature regulator in order to release the
water temperature regulator from the tabs of the water temperature regulator housing.
5. Refer to Systems Operation, Testing and Adjusting, "Water Temperature Regulator - Test"
for the correct procedure on testing the water temperature regulator.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Clean the water temperature regulator housing.
2/3
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. Illustration 2 g00953937
2. Position the water temperature regulator (3) in the water temperature regulator housing.
Squeeze the retainers (A) and rotate the water temperature regulator in order to secure the
water temperature regulator to the water temperature regulator housing.
Note: The retainers (A) must be inserted behind the tabs of the water temperature regulator
housing in order to secure the water temperature regulator during engine operation.
3. Install a new O-ring seal on the water temperature regulator housing (1). Lubricate the O-
ring seal with red rubber grease. Position the water temperature regulator housing on the
cylinder head.
4. Install the setscrews (2) that fasten water temperature regulator housing (1) to the cylinder
head.
5. Install the upper radiator hose and tighten the hose clamps. Refer to the Torque
Specifications Manual for the correct torque.
6. Fill the cooling system to the proper level. Refer to the Operation and Maintenance Manual,
"Refill Capacities" for further information.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 23:08:12 UTC+0800 2019
3/3
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 432D BACKHOE LOADER WEP
Configuration: 432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
3054C Engines for Caterpillar Built Machines
Media Number -SENR5069-18 Publication Date -01/05/2015 Date Updated -19/09/2018
i02293555
Flywheel - Remove
SMCS - 1156-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Bolt (1/2 inch - 20 NF by 4 inch) 2
B 138-7575 Link Bracket 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/3
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 1 g01148312
Typical example
1. Remove the two setscrews and install the Tooling (A) as guides.
Note: The weight of the flywheel (2) is approximately 54 kg (119 lb). Install the Tooling
(B) in order to support the flywheel (2) before the remainder of the setscrews (1) are
removed.
2. Remove the remaining setscrews (1) that secure flywheel (2) to the crankshaft.
3. Remove the flywheel (2) from the engine.
2/3
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 2 g01148313
4. Check the condition of the ring gear (4). Remove the ring gear (4) if the ring gear is worn or
damaged.
Note: Identify the orientation of the ring gear (4) on the flywheel (2) and the position of the
chamfer on the teeth for the correct positioning when the new ring gear is installed.
5. Place the flywheel (2) and the ring gear (4) on a suitable support. Use a hammer and a chisel
in order to remove the ring gear (4) from the flywheel (2).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 23:09:07 UTC+0800 2019
3/3
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 432D BACKHOE LOADER WEP
Configuration: 432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
3054C Engines for Caterpillar Built Machines
Media Number -SENR5069-18 Publication Date -01/05/2015 Date Updated -19/09/2018
i07030444
Flywheel - Install
SMCS - 1156-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A -
Guide Bolt
(1/2 inch - 20 NF by 4 inch)
2
B 138-7575 Link Bracket 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Thoroughly clean the flywheel housing. Inspect the crankshaft rear seal for leaks. If there
are any oil leaks, refer to this Disassembly and Assembly Manual, "Crankshaft Rear Seal -
Remove" for the correct procedure.
1/3
432D Backhoe Loader WEP00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...