This document provides instructions for removing and installing an engine from a Caterpillar 420F2 backhoe loader. It outlines 19 steps to remove the engine, which include draining fluids, disconnecting wiring harnesses, removing guards and covers, and using lifting equipment to remove the engine. The 18 steps to install the engine describe reversing the removal process and include reconnecting wiring, installing guards and covers, and refilling fluids. The document provides illustrations and references other manuals for some removal and installation procedures.
This is the Highly Detailed factory service repair manual for theCATERPILLAR CAT 420F2 BACKHOE LOADER (PREFIX NSB), this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CATERPILLAR CAT 420F2 BACKHOE LOADER (PREFIX NSB) Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Models Cover:
420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 3054C Engine
Service Repair Manual Covers:
Disassembly and Assembly
Testing and Adjusting
Troubleshooting
Systems Operation
Torque Specifications
Specifications
Schematic – Hydraulic System
Schematic – Electrical System
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCATERPILLAR CAT 420F2 BACKHOE LOADER (PREFIX NSB) Service Repair Workshop Manual.
Thanks for visiting!
This is the Highly Detailed factory service repair manual for theCATERPILLAR CAT 420F2 BACKHOE LOADER (PREFIX NSB), this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CATERPILLAR CAT 420F2 BACKHOE LOADER (PREFIX NSB) Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Models Cover:
420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 3054C Engine
Service Repair Manual Covers:
Disassembly and Assembly
Testing and Adjusting
Troubleshooting
Systems Operation
Torque Specifications
Specifications
Schematic – Hydraulic System
Schematic – Electrical System
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCATERPILLAR CAT 420F2 BACKHOE LOADER (PREFIX NSB) Service Repair Workshop Manual.
Thanks for visiting!
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
2. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 420F2 BACKHOE LOADER NSB
Configuration: 420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
416F2, 420F2 IT, 420F2 ST, 422F2, 428F2, 430F2 IT, 430F2 ST, 432F2, 434F2 and
444F2 Backhoe Loaders Engine Supplement
Media Number -UENR6152-01 Publication Date -01/06/2015 Date Updated -06/06/2018
i06199411
Engine - Remove
SMCS - 1000-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7505 Hydraulic Jack 1
B 6V-3145 Load Leveling Beam 1
Start By:
a. Remove hood.
b. Remove side panels.
c. Remove air cleaner.
d. Remove muffler.
1. Drain the coolant. Refer to Operations and Maintenance Manual, "Cooling System Coolant
(ELC) - Change" for the correct draining procedure.
2. Drain the engine oil. Refer to Operations and Maintenance Manual , "Engine Oil and Filter -
Change" for the correct draining procedures.
1/8420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 30...
2019/11/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g03797183
3. Turn battery disconnect switch (1) to the OFF position.
Illustration 2 g03797188
4. Remove plate (2) and floor mat (3).
Illustration 3 g03797205
5. Remove bolts (4). Lift plate assembly (5) and secure in rear notches. Do not remove bolts
(6).
2/8420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 30...
2019/11/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g03797235
6. Reposition fuel filter assembly (7) out of the way.
Illustration 5 g03849199
Illustration 6 g03849201
7. Remove coolant tank assembly (8). Remove tube (9). Remove hoses (10) and (11). Remove
tube (12).
3/8420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 30...
2019/11/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 7 g03849203
8. Remove hose (13). Remove fan guard (14). Remove fan shroud (15).
Illustration 8 g03849206
9. Remove nuts (16). Remove fan and hub assembly (17).
Illustration 9 g03849219
10. Remove bolts (18) and reposition air condition compressor (19) to the side.
4/8420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 30...
2019/11/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 10 g03849221
11. Disconnect harness assemblies (20) from the alternator.
Illustration 11 g03849240
Illustration 12 g03849251
12. Disconnect harness assemblies (21) from the electric starting motor. Disconnect clips (22)
from bracket (23). Disconnect ground strap (24).
5/8420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 30...
2019/11/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 13 g03849253
13. Remove cover (25).
Illustration 14 g03849257
14. Remove bolts (26) from flywheel (27).
Note: Rotate the engine manually in order to access all bolts (26).
6/8420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 30...
2019/11/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 15 g03849484
15. Remove bolts (29) from bell housing (28).
Illustration 16 g02997457
16. Install Tooling (A) under transmission.
Illustration 17 g03849495
17. Install Tooling (B) and a suitable lifting device. The weight of engine (30) is approximately
544 kg (1200 lb)
7/8420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 30...
2019/11/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 18 g03849498
18. Remove engine mounting bolts (31). Repeat on opposite side.
19. Remove engine (30).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Nov 28 23:53:22 UTC+0800 2019
8/8420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 30...
2019/11/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 420F2 BACKHOE LOADER NSB
Configuration: 420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
416F2, 420F2 IT, 420F2 ST, 422F2, 428F2, 430F2 IT, 430F2 ST, 432F2, 434F2 and
444F2 Backhoe Loaders Engine Supplement
Media Number -UENR6152-01 Publication Date -01/06/2015 Date Updated -06/06/2018
i06199414
Engine - Install
SMCS - 1000-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7505 Hydraulic Jack 1
B 6V-3145 Load Leveling Beam 1
Illustration 1 g03849495
1. Attach Tooling (B) and a suitable lifting device to engine (30). The weight of engine (30) is
approximately 544kg (1200 lb). Use Tooling (B) and the suitable lifting device to position
engine (30) into the machine.
1/8420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 30...
2019/11/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 2 g03849484
Illustration 3 g03849257
2. Align bell housing (28) to the engine and install bolts (29).
3. Rotate the engine and install bolts (26) in order to connect flywheel (27) to the torque
converter.
2/8420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 30...
2019/11/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
17. Illustration 17 g03797188
16. Position floor mat (3). Position plate (2) and install the bolts . Repeat on the opposite side of
the cab.
Illustration 18 g03797183
17. Turn battery disconnect switch (1) to the ON position.
18. Fill the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant
(ELC) - Change" for the correct filling procedure.
19. Fill the engine oil . Refer to Operation and Maintenance Manual, "Engine Oil and Filter -
Change" for the correct filling procedure.
End By:
a. Install air cleaner.
b. Install muffler.
c. Install hood assembly.
d. Install side panels.
Thu Nov 28 23:54:18 UTC+0800 2019
7/8420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 30...
2019/11/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 420F2 BACKHOE LOADER NSB
Configuration: 420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
3054C Engines for Caterpillar Built Machines
Media Number -SENR5069-18 Publication Date -01/05/2015 Date Updated -19/09/2018
i02289796
Fuel Priming Pump and Fuel Filter Base - Remove and
Install
SMCS - 1258-010; 1260-010; 1261-010-SE; 1262-010
Removal Procedure
Table 1
Required Tools(1)
Tool Part Number Part Description Qty
ZZ
9U-7069 Cap 3
9U-7067 Cap 3
(1)
SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE
REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE
EXPERIENCED SERVICEMAN.
Start By:
a. Remove the assembly of the filter case and the fuel filter element. Refer to this Disassembly
and Assembly Manual, "Fuel Filter Base - Remove and Install".
Note: Put identification marks on all fuel hose assemblies and on all tube assemblies for
installation purposes. After being disconnected, plug all fuel hose assemblies and plug all tube
assemblies. This helps prevent fluid loss, and this helps to keep contaminants from entering the
system.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/3420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 30...
2019/11/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00952432
Typical example
1. Disconnect the tube assembly (5). Disconnect the tube assembly (6). Install dust covers onto
the connectors for the fuel priming pump.
2. Disconnect the fuel return line from the connector (3). Install a dust cover to the connector
(3).
3. Disconnect the harness assembly from the connector (2).
4. Support the fuel priming pump. Remove the three setscrews (1) and discard the rubber
washers. Remove the fuel priming pump (4).
2/3420F2 ADL (Air Deployable Loader) NSB00001-UP (MACHINE) POWERED BY 30...
2019/11/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...